d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cbbdcac72a
freebsd-dev/sys/boot/ia64/ski/ssc.c

54 lines
2.1 KiB
C
Raw Normal View History

Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
/*-
* Copyright (c) 2001 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID(). Also some minor style cleanups.
2003-09-08 09:11:32 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
#include <stand.h>
#include "libski.h"
Remove special casing for running in the simulator from the kernel and instead add platform, firmware and EFI stubs to the loader. The net effect of this change is that besides a special console and disk driver, the kernel has no knowledge of the simulator. This has the following advantages: o Simulator support is much harder to break, o It's easier to make use of more feature complete simulators. This would only need a change in the simulator specific loader, o Running SMP kernels within the simulator. Note that ski at this time does not simulate IPIs, so there's no way to start APs. The platform, firmware and EFI stubs describe the following hardware: o 4 CPU Itanium, o 128 MB RAM within the 4GB address space, o 64 MB RAM above the 4GB address space. NOTE: The stubs in the skiloader describe a machine that should in parts be defined by the simulator. Things like processor interrupt block and AP wakeup vector cannot be choosen at random because they require interpretation by the simulator. Currently the simulator is ignorant of this. This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS which is ignored by the simulator. Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
/*
* Ugh... Work around a bug in the Linux version of ski for SSC_GET_RTC. The
* PSR.dt register is not preserved properly and causes further memory
* references to be done without translation. All we need to do is preserve
* PSR.dt across the SSC call. We do this by saving and restoring psr.l
* completely.
*/
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
u_int64_t
ssc(u_int64_t in0, u_int64_t in1, u_int64_t in2, u_int64_t in3, int which)
{
Remove special casing for running in the simulator from the kernel and instead add platform, firmware and EFI stubs to the loader. The net effect of this change is that besides a special console and disk driver, the kernel has no knowledge of the simulator. This has the following advantages: o Simulator support is much harder to break, o It's easier to make use of more feature complete simulators. This would only need a change in the simulator specific loader, o Running SMP kernels within the simulator. Note that ski at this time does not simulate IPIs, so there's no way to start APs. The platform, firmware and EFI stubs describe the following hardware: o 4 CPU Itanium, o 128 MB RAM within the 4GB address space, o 64 MB RAM above the 4GB address space. NOTE: The stubs in the skiloader describe a machine that should in parts be defined by the simulator. Things like processor interrupt block and AP wakeup vector cannot be choosen at random because they require interpretation by the simulator. Currently the simulator is ignorant of this. This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS which is ignored by the simulator. Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
register u_int64_t psr;
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
register u_int64_t ret0 __asm("r8");
Remove special casing for running in the simulator from the kernel and instead add platform, firmware and EFI stubs to the loader. The net effect of this change is that besides a special console and disk driver, the kernel has no knowledge of the simulator. This has the following advantages: o Simulator support is much harder to break, o It's easier to make use of more feature complete simulators. This would only need a change in the simulator specific loader, o Running SMP kernels within the simulator. Note that ski at this time does not simulate IPIs, so there's no way to start APs. The platform, firmware and EFI stubs describe the following hardware: o 4 CPU Itanium, o 128 MB RAM within the 4GB address space, o 64 MB RAM above the 4GB address space. NOTE: The stubs in the skiloader describe a machine that should in parts be defined by the simulator. Things like processor interrupt block and AP wakeup vector cannot be choosen at random because they require interpretation by the simulator. Currently the simulator is ignorant of this. This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS which is ignored by the simulator. Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
__asm __volatile("mov %0=psr;;" : "=r"(psr));
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
__asm __volatile("mov r15=%1\n\t"
Remove special casing for running in the simulator from the kernel and instead add platform, firmware and EFI stubs to the loader. The net effect of this change is that besides a special console and disk driver, the kernel has no knowledge of the simulator. This has the following advantages: o Simulator support is much harder to break, o It's easier to make use of more feature complete simulators. This would only need a change in the simulator specific loader, o Running SMP kernels within the simulator. Note that ski at this time does not simulate IPIs, so there's no way to start APs. The platform, firmware and EFI stubs describe the following hardware: o 4 CPU Itanium, o 128 MB RAM within the 4GB address space, o 64 MB RAM above the 4GB address space. NOTE: The stubs in the skiloader describe a machine that should in parts be defined by the simulator. Things like processor interrupt block and AP wakeup vector cannot be choosen at random because they require interpretation by the simulator. Currently the simulator is ignorant of this. This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS which is ignored by the simulator. Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
"break 0x80000;;"
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
: "=r"(ret0)
: "r"(which), "r"(in0), "r"(in1), "r"(in2), "r"(in3));
Remove special casing for running in the simulator from the kernel and instead add platform, firmware and EFI stubs to the loader. The net effect of this change is that besides a special console and disk driver, the kernel has no knowledge of the simulator. This has the following advantages: o Simulator support is much harder to break, o It's easier to make use of more feature complete simulators. This would only need a change in the simulator specific loader, o Running SMP kernels within the simulator. Note that ski at this time does not simulate IPIs, so there's no way to start APs. The platform, firmware and EFI stubs describe the following hardware: o 4 CPU Itanium, o 128 MB RAM within the 4GB address space, o 64 MB RAM above the 4GB address space. NOTE: The stubs in the skiloader describe a machine that should in parts be defined by the simulator. Things like processor interrupt block and AP wakeup vector cannot be choosen at random because they require interpretation by the simulator. Currently the simulator is ignorant of this. This change introduces an unofficial SSC call SSC_SAL_SET_VECTORS which is ignored by the simulator. Tested with: ski (version 0.943 for linux)
2003-02-01 22:50:09 +00:00
__asm __volatile("mov psr.l=%0;; srlz.d" :: "r"(psr));
Add a version of the loader which runs under SKI, the HP ia64 simulator. This loader is quite functional and can load and run kernels. The kernels don't quite work right after loading but that should be easily fixable.
2001-09-12 08:34:27 +00:00
return ret0;
}
Reference in New Issue Copy Permalink