freebsd-dev/sys/i386/isa/ic/Am7990.h

/*
 * Am7990, Local Area Network Controller for Ethernet (LANCE)
 * 
 * Copyright (c) 1994, Paul Richards. This software may be used,
 * modified, copied, distributed, and sold, in both source and binary
 * form provided that the above copyright and these terms are retained.
 * Under no circumstances is the author responsible for the proper
 * functioning of this software, nor does the author assume any
 * responsibility for damages incurred with its use.
 *
 */

/*
 * The LANCE has four Control and Status Registers(CSRs) which are accessed
 * through two bus addressable ports, the address port (RAP) and the data
 * port (RDP).
 *
 */

#define CSR0	0
#define CSR1	1
#define CSR2	2
#define CSR3	3
#define CSR88	88
#define CSR89	89


/* Control and Status Register Masks */

/* CSR0 */

#define ERR	0x8000
#define BABL	0x4000
#define CERR	0x2000
#define MISS	0x1000
#define MERR	0x0800
#define RINT	0x0400
#define TINT	0x0200  
#define IDON	0x0100  
#define INTR	0x0080
#define INEA	0x0040
#define RXON	0x0020
#define TXON	0x0010
#define TDMD	0x0008
#define STOP	0x0004  
#define STRT	0x0002
#define INIT	0x0001   

/* 
 * CSR3
 *
 * Bits 3-15 are reserved.
 *
 */

#define BSWP	0x0004
#define ACON	0x0002 
#define BCON	0x0001

/* Initialisation block */

struct init_block {  
	u_short mode;		/* Mode register			*/
	u_char  padr[6];	/* Ethernet address			*/
	u_char  ladrf[8];	/* Logical address filter (multicast)	*/
	u_short rdra;		/* Low order pointer to receive ring	*/
	u_short rlen;		/* High order pointer and no. rings	*/
	u_short tdra;		/* Low order pointer to transmit ring	*/
	u_short tlen;		/* High order pointer and no rings	*/
};

/* Initialisation Block Mode Register Masks */

#define PROM      0x8000   /* Promiscuous Mode */
#define DRCVBC    0x4000   /* Disable Receive Broadcast */
#define DRCVPA    0x2000   /* Disable Receive Physical Address */
#define DLNKTST	0x1000   /* Disable Link Status */
#define DAPC      0x0800   /* Disable Automatic Polarity Correction */
#define MENDECL   0x0400   /* MENDEC Loopback Mode */
#define LRT       0x0200   /* Low Receive Threshold (T-MAU mode only) */
#define TSEL      0x0200   /* Transmit Mode Select  (AUI mode only) */
#define PORTSEL   0x0180   /* Port Select bits */
#define INTL      0x0040   /* Internal Loopback */
#define DRTY      0x0020   /* Disable Retry */
#define FCOLL     0x0010   /* Force Collision */
#define DXMTFCS   0x0008   /* Disable transmit CRC (FCS) */
#define LOOP      0x0004   /* Loopback Enabl */
#define DTX       0x0002   /* Disable the transmitter */
#define DRX       0x0001   /* Disable the receiver */

/* 
 * Message Descriptor Structure
 *
 * Each transmit or receive descriptor ring entry (RDRE's and TDRE's)
 * is composed of 4, 16-bit, message descriptors. They contain the following
 * information.
 *
 * 1. The address of the actual message data buffer in user (host) memory.
 * 2. The length of that message buffer.
 * 3. The status information for that particular buffer. The eight most
 *    significant bits of md1 are collectively termed the STATUS of the
 *    descriptor.
 * 
 * Descriptor md0 contains LADR 0-15, the low order 16 bits of the 24-bit
 * address of the actual data buffer.  Bits 0-7 of descriptor md1 contain 
 * HADR, the high order 8-bits of the 24-bit data buffer address. Bits 8-15
 * of md1 contain the status flags of the buffer. Descriptor md2 contains the
 * buffer byte count in bits 0-11 as a two's complement number and must have 
 * 1's written to bits 12-15. For the receive entry md3 has the Message Byte
 * Count in bits 0-11, this is the length of the received message and is valid 
 * only when ERR is cleared and ENP is set. For the transmit entry it contains
 * more status information.
 *
 */

struct mds {
	u_short md0;
	u_short md1;
	short   md2;   
	u_short md3;  
};

/* Receive STATUS flags for md1 */

#define OWN	0x8000		/* Owner bit, 0=host, 1=Lance   */
#define MDERR	0x4000		/* Error                        */
#define FRAM	0x2000		/* Framing error error          */
#define OFLO	0x1000		/* Silo overflow                */
#define CRC	0x0800		/* CRC error                    */
#define RBUFF	0x0400		/* Buffer error                 */
#define STP	0x0200		/* Start of packet              */
#define ENP	0x0100		/* End of packet                */
#define HADR	0x00FF		/* High order address bits	*/

/* Receive STATUS flags for md2 */

#define BCNT	0x0FFF		/* Size of data buffer as 2's comp. no. */

/* Receive STATUS flags for md3 */

#define MCNT	0x0FFF		/* Total size of data for received packet */

/* Transmit STATUS flags for md1 */

#define ADD_FCS	0x2000		/* Controls generation of FCS	*/
#define MORE	0x1000		/* Indicates more than one retry was needed */
#define ONE	0x0800		/* Exactly one retry was needed */
#define DEF	0x0400		/* Packet transmit deferred -- channel busy */

/* 
 * Transmit status flags for md2 
 *
 * Same as for receive descriptor.
 *
 * BCNT   0x0FFF         Size of data buffer as 2's complement number.
 *
 */

/* Transmit status flags for md3 */

#define TBUFF	0x8000		/* Buffer error         */
#define UFLO	0x4000		/* Silo underflow       */
#define LCOL	0x1000		/* Late collision       */
#define LCAR	0x0800		/* Loss of carrier      */
#define RTRY	0x0400		/* Tried 16 times       */
#define TDR 	0x03FF		/* Time domain reflectometry */