d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
cd39450155
freebsd-dev/sys/netinet/in_proto.c

348 lines
9.3 KiB
C
Raw Normal View History

/* -> /*- for license, minor formatting changes
2005-01-07 01:45:51 +00:00
/*-
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
* Copyright (c) 1982, 1986, 1993
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Renumber copyright clause 4 Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
2017-02-28 23:42:47 +00:00
* 3. Neither the name of the University nor the names of its contributors
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Merge 4.4-Lite-2: update some declarations that we don't support anyway. Obtained from: 4.4BSD-Lite-2
1995-09-21 17:58:07 +00:00
* @(#)in_proto.c 8.2 (Berkeley) 2/9/95
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add FBSDID to all files in netinet so that people can more easily include file version information in bug reports. Approved by: re (kensmith)
2007-10-07 20:44:24 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
#include "opt_mrouting.h"
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
#include "opt_ipsec.h"
Make in_proto.c dependent on either inet or inet6. While it does not provide any functionality for IPv6, it provides the sysctl nodes for net.inet.* that a lot of functionality shared between IPv4 and IPv6 depends on. We cannot change these anymore without breaking a lot of management and tuning. In case of IPv6 only, we compile out everything but the sysctl node declarations. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC After: 5 days
2011-04-17 16:35:16 +00:00
#include "opt_inet.h"
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
#include "opt_inet6.h"
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#include "opt_sctp.h"
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#include "opt_mpath.h"
Make IPDIVERT a supported option. Alas, in_var.h depends on it, i hope i've found out all files that actually depend on this dependancy. IMHO, it's not very good practice to change the size of internal structs depending on kernel options.
1997-11-05 20:17:23 +00:00
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <sys/param.h>
Add a TCP TIMEWAIT state which uses less space than a fullblown TCP control block. Allow the socket and tcpcb structures to be freed earlier than inpcb. Update code to understand an inp w/o a socket. Reviewed by: hsu, silby, jayanth Sponsored by: DARPA, NAI Labs
2003-02-19 22:32:43 +00:00
#include <sys/systm.h>
Make networking domains drop-ins, through the magic of GNU ld. (Some day, there may even be LKMs.) Also, change the internal name of `unixdomain' to `localdomain' since AF_LOCAL is now the preferred name of this family. Declare netisr correctly and in the right place.
1995-05-11 00:13:26 +00:00
#include <sys/kernel.h>
These files were getting sys/malloc.h and vm/uma.h with header pollution via sys/mbuf.h
2016-02-01 17:41:21 +00:00
#include <sys/malloc.h>
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <sys/socket.h>
#include <sys/domain.h>
Conditionally compile out V_ globals while instantiating the appropriate container structures, depending on VIMAGE_GLOBALS compile time option. Make VIMAGE_GLOBALS a new compile-time option, which by default will not be defined, resulting in instatiations of global variables selected for V_irtualization (enclosed in #ifdef VIMAGE_GLOBALS blocks) to be effectively compiled out. Instantiate new global container structures to hold V_irtualized variables: vnet_net_0, vnet_inet_0, vnet_inet6_0, vnet_ipsec_0, vnet_netgraph_0, and vnet_gif_0. Update the VSYM() macro so that depending on VIMAGE_GLOBALS the V_ macros resolve either to the original globals, or to fields inside container structures, i.e. effectively #ifdef VIMAGE_GLOBALS #define V_rt_tables rt_tables #else #define V_rt_tables vnet_net_0._rt_tables #endif Update SYSCTL_V_*() macros to operate either on globals or on fields inside container structs. Extend the internal kldsym() lookups with the ability to resolve selected fields inside the virtualization container structs. This applies only to the fields which are explicitly registered for kldsym() visibility via VNET_MOD_DECLARE() and vnet_mod_register(), currently this is done only in sys/net/if.c. Fix a few broken instances of MODULE_GLOBAL() macro use in SCTP code, and modify the MODULE_GLOBAL() macro to resolve to V_ macros, which in turn result in proper code being generated depending on VIMAGE_GLOBALS. De-virtualize local static variables in sys/contrib/pf/net/pf_subr.c which were prematurely V_irtualized by automated V_ prepending scripts during earlier merging steps. PF virtualization will be done separately, most probably after next PF import. Convert a few variable initializations at instantiation to initialization in init functions, most notably in ipfw. Also convert TUNABLE_INT() initializers for V_ variables to TUNABLE_FETCH_INT() in initializer functions. Discussed at: devsummit Strassburg Reviewed by: bz, julian Approved by: julian (mentor) Obtained from: //depot/projects/vimage-commit2/... X-MFC after: never Sponsored by: NLnet Foundation, The FreeBSD Foundation
2008-12-10 23:12:39 +00:00
#include <sys/proc.h>
fix #includes & warnings.
1995-11-20 12:28:21 +00:00
#include <sys/protosw.h>
* Change sysctl from using linker_set to construct its tree using SLISTs. This makes it possible to change the sysctl tree at runtime. * Change KLD to find and register any sysctl nodes contained in the loaded file and to unregister them when the file is unloaded. Reviewed by: Archie Cobbs <archie@whistle.com>, Peter Wemm <peter@netplex.com.au> (well they looked at it anyway)
1999-02-16 10:49:55 +00:00
#include <sys/queue.h>
Start adding new style sysctl here too.
1995-11-09 20:23:09 +00:00
#include <sys/sysctl.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Make in_proto.c dependent on either inet or inet6. While it does not provide any functionality for IPv6, it provides the sysctl nodes for net.inet.* that a lot of functionality shared between IPv4 and IPv6 depends on. We cannot change these anymore without breaking a lot of management and tuning. In case of IPv6 only, we compile out everything but the sysctl node declarations. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC After: 5 days
2011-04-17 16:35:16 +00:00
/*
* While this file provides the domain and protocol switch tables for IPv4, it
* also provides the sysctl node declarations for net.inet.* often shared with
* IPv6 for common features or by upper layer protocols. In case of no IPv4
* support compile out everything but these sysctl nodes.
*/
#ifdef INET
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <net/if.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <net/route.h>
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
#include <net/radix_mpath.h>
#endif
Merge the remainder of kern_vimage.c and vimage.h into vnet.c and vnet.h, we now use jails (rather than vimages) as the abstraction for virtualization management, and what remained was specific to virtual network stacks. Minor cleanups are done in the process, and comments updated to reflect these changes. Reviewed by: bz Approved by: re (vimage blanket)
2009-08-01 19:26:27 +00:00
#include <net/vnet.h>
Be less strict on includes than in r220746. We need in.h for both INET or INET6 as it holds all the IPPROTO_* definitions needed for the SYSCTL_NODE definitions. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 5 days
2011-04-25 16:36:16 +00:00
#endif /* INET */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Be less strict on includes than in r220746. We need in.h for both INET or INET6 as it holds all the IPPROTO_* definitions needed for the SYSCTL_NODE definitions. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 5 days
2011-04-25 16:36:16 +00:00
#if defined(INET) || defined(INET6)
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <netinet/in.h>
Be less strict on includes than in r220746. We need in.h for both INET or INET6 as it holds all the IPPROTO_* definitions needed for the SYSCTL_NODE definitions. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 5 days
2011-04-25 16:36:16 +00:00
#endif
#ifdef INET
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <netinet/in_systm.h>
This main goals of this project are: 1. separating L2 tables (ARP, NDP) from the L3 routing tables 2. removing as much locking dependencies among these layers as possible to allow for some parallelism in the search operations 3. simplify the logic in the routing code, The most notable end result is the obsolescent of the route cloning (RTF_CLONING) concept, which translated into code reduction in both IPv4 ARP and IPv6 NDP related modules, and size reduction in struct rtentry{}. The change in design obsoletes the semantics of RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland applications such as "arp" and "ndp" have been modified to reflect those changes. The output from "netstat -r" shows only the routing entries. Quite a few developers have contributed to this project in the past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and Andre Oppermann. And most recently: - Kip Macy revised the locking code completely, thus completing the last piece of the puzzle, Kip has also been conducting active functional testing - Sam Leffler has helped me improving/refactoring the code, and provided valuable reviews - Julian Elischer setup the perforce tree for me and has helped me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
#include <netinet/in_var.h>
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/ip_icmp.h>
#include <netinet/igmp_var.h>
#include <netinet/tcp.h>
#include <netinet/tcp_timer.h>
#include <netinet/tcp_var.h>
#include <netinet/udp.h>
#include <netinet/udp_var.h>
sync with kame tree as of july00. tons of bug fixes/improvements. API changes: - additional IPv6 ioctls - IPsec PF_KEY API was changed, it is mandatory to upgrade setkey(8). (also syntax change)
2000-07-04 16:35:15 +00:00
#include <netinet/ip_encap.h>
IPSEC support in the kernel. pr_input() routines prototype is also changed to support IPSEC and IPV6 chained protocol headers. Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-22 19:13:38 +00:00
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
/*
* TCP/IP protocol family: IP, ICMP, UDP, TCP.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Match IPv6 and use a static struct pr_usrreqs nousrreqs.
2005-08-10 06:41:04 +00:00
static struct pr_usrreqs nousrreqs;
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP
#include <netinet/in_pcb.h>
#include <netinet/sctp_pcb.h>
#include <netinet/sctp.h>
#include <netinet/sctp_var.h>
#endif /* SCTP */
Add FEATURE() definitions for IPv4 and IPv6 so that we can use feature_present(3) to dynamically decide whether to use one or the other family. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 10 days
2011-05-25 00:34:25 +00:00
FEATURE(inet, "Internet Protocol version 4");
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
extern struct domain inetdomain;
Make use of the PROTO_SPACER functionality for dynamically loadable protocols in inetsw[] and define initially eight spacer slots. Remove conflicting declaration 'struct pr_usrreqs nousrreqs'. It is now declared and initialized in kern/uipc_domain.c.
2004-10-19 15:58:22 +00:00
/* Spacer for loadable protocols. */
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
#define IPPROTOSPACER \
{ \
.pr_domain = &inetdomain, \
.pr_protocol = PROTO_SPACER, \
.pr_usrreqs = &nousrreqs \
Make use of the PROTO_SPACER functionality for dynamically loadable protocols in inetsw[] and define initially eight spacer slots. Remove conflicting declaration 'struct pr_usrreqs nousrreqs'. It is now declared and initialized in kern/uipc_domain.c.
2004-10-19 15:58:22 +00:00
}
Initial get-the-easy-case-working upgrade of the multicast code to something more recent than the ancient 1.2 release contained in 4.4. This code has the following advantages as compared to previous versions (culled from the README file for the SunOS release): - True multicast delivery - Configurable rate-limiting of forwarded multicast traffic on each physical interface or tunnel, using a token-bucket limiter. - Simplistic classification of packets for prioritized dropping. - Administrative scoping of multicast address ranges. - Faster detection of hosts leaving groups. - Support for multicast traceroute (code not yet available). - Support for RSVP, the Resource Reservation Protocol. What still needs to be done: - The multicast forwarder needs testing. - The multicast routing daemon needs to be ported. - Network interface drivers need to have the `#ifdef MULTICAST' goop ripped out of them. - The IGMP code should probably be bogon-tested. Some notes about the porting process: In some cases, the Berkeley people decided to incorporate functionality from later releases of the multicast code, but then had to do things differently. As a result, if you look at Deering's patches, and then look at our code, it is not always obvious whether the patch even applies. Let the reader beware. I ran ip_mroute.c through several passes of `unifdef' to get rid of useless grot, and to permanently enable the RSVP support, which we will include as standard. Ported by: Garrett Wollman Submitted by: Steve Deering and Ajit Thyagarajan (among others)
1994-09-06 22:42:31 +00:00
Patches from Keiichi SHIMA <keiichi@iij.ad.jp> to make ip use the standard protosw structure again. Obtained from: Well, KAME I guess.
2001-09-03 20:03:55 +00:00
struct protosw inetsw[] = {
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = 0,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_IP,
.pr_init = ip_init,
.pr_slowtimo = ip_slowtimo,
.pr_drain = ip_drain,
.pr_usrreqs = &nousrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_UDP,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = udp_input,
.pr_ctlinput = udp_ctlinput,
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
.pr_ctloutput = udp_ctloutput,
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
.pr_init = udp_init,
.pr_usrreqs = &udp_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_STREAM,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_TCP,
.pr_flags = PR_CONNREQUIRED|PR_IMPLOPCL|PR_WANTRCVD,
.pr_input = tcp_input,
.pr_ctlinput = tcp_ctlinput,
.pr_ctloutput = tcp_ctloutput,
.pr_init = tcp_init,
.pr_slowtimo = tcp_slowtimo,
.pr_drain = tcp_drain,
.pr_usrreqs = &tcp_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP
{
The socket API only specifies SCTP for SOCK_SEQPACKET and SOCK_STREAM, but not SOCK_DGRAM. So don't register it for SOCK_DGRAM. While there, fix some indentation.
2011-07-12 19:29:29 +00:00
.pr_type = SOCK_SEQPACKET,
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_SCTP,
Remove IPsec related PCB code from SCTP. The inpcb structure has inp_sp pointer that is initialized by ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec security policies associated with a specific socket. An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options to configure these security policies. Then ip[6]_output() uses inpcb pointer to specify that an outgoing packet is associated with some socket. And IPSEC_OUTPUT() method can use a security policy stored in the inp_sp. For inbound packet the protocol-specific input routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms to inbound security policy configured in the inpcb. SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends packets. Thus IPSEC_OUTPUT() method does not consider such packets as associated with some socket and can not apply security policies from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY() method is called from protocol-specific input routine, it can specify inpcb pointer and associated with socket inbound policy will be checked. But there are two problems: 1. Such check is asymmetric, becasue we can not apply security policy from inpcb for outgoing packet. 2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and access to inp_sp is protected. But for SCTP this is not correct, becasue SCTP uses own locks to protect inpcb. To fix these problems remove IPsec related PCB code from SCTP. This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options will be not applicable to SCTP sockets. To be able correctly check inbound security policies for SCTP, mark its protocol header with the PR_LASTHDR flag. Reported by: tuexen Reviewed by: tuexen Differential Revision: https://reviews.freebsd.org/D9538
2017-02-13 11:37:52 +00:00
.pr_flags = PR_WANTRCVD|PR_LASTHDR,
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
.pr_input = sctp_input,
.pr_ctlinput = sctp_ctlinput,
.pr_ctloutput = sctp_ctloutput,
.pr_init = sctp_init,
.pr_drain = sctp_drain,
.pr_usrreqs = &sctp_usrreqs
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
},
{
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
.pr_type = SOCK_STREAM,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_SCTP,
Remove IPsec related PCB code from SCTP. The inpcb structure has inp_sp pointer that is initialized by ipsec_init_pcbpolicy() function. This pointer keeps strorage for IPsec security policies associated with a specific socket. An application can use IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options to configure these security policies. Then ip[6]_output() uses inpcb pointer to specify that an outgoing packet is associated with some socket. And IPSEC_OUTPUT() method can use a security policy stored in the inp_sp. For inbound packet the protocol-specific input routine uses IPSEC_CHECK_POLICY() method to check that a packet conforms to inbound security policy configured in the inpcb. SCTP protocol doesn't specify inpcb for ip[6]_output() when it sends packets. Thus IPSEC_OUTPUT() method does not consider such packets as associated with some socket and can not apply security policies from inpcb, even if they are configured. Since IPSEC_CHECK_POLICY() method is called from protocol-specific input routine, it can specify inpcb pointer and associated with socket inbound policy will be checked. But there are two problems: 1. Such check is asymmetric, becasue we can not apply security policy from inpcb for outgoing packet. 2. IPSEC_CHECK_POLICY() expects that caller holds INPCB lock and access to inp_sp is protected. But for SCTP this is not correct, becasue SCTP uses own locks to protect inpcb. To fix these problems remove IPsec related PCB code from SCTP. This imply that IP_IPSEC_POLICY and IPV6_IPSEC_POLICY socket options will be not applicable to SCTP sockets. To be able correctly check inbound security policies for SCTP, mark its protocol header with the PR_LASTHDR flag. Reported by: tuexen Reviewed by: tuexen Differential Revision: https://reviews.freebsd.org/D9538
2017-02-13 11:37:52 +00:00
.pr_flags = PR_CONNREQUIRED|PR_WANTRCVD|PR_LASTHDR,
Get SCTP working in combination with VIMAGE. Contains code from bz. Approved by: rrs (mentor) MFC after: 1 month.
2009-09-19 14:02:16 +00:00
.pr_input = sctp_input,
.pr_ctlinput = sctp_ctlinput,
.pr_ctloutput = sctp_ctloutput,
.pr_drain = sctp_drain,
.pr_usrreqs = &sctp_usrreqs
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
},
#endif /* SCTP */
Add support for UDP-Lite protocol (RFC 3828) to IPv4 and IPv6 stacks. Tested with vlc and a test suite [1]. [1] http://www.erg.abdn.ac.uk/~gerrit/udp-lite/files/udplite_linux.tar.gz Reviewed by: jhb, glebius, adrian
2014-04-07 01:53:03 +00:00
{
.pr_type = SOCK_DGRAM,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_UDPLITE,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = udp_input,
.pr_ctlinput = udplite_ctlinput,
.pr_ctloutput = udp_ctloutput,
.pr_init = udplite_init,
.pr_usrreqs = &udp_usrreqs
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_RAW,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip_input,
.pr_ctlinput = rip_ctlinput,
.pr_ctloutput = rip_ctloutput,
.pr_usrreqs = &rip_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_ICMP,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = icmp_input,
.pr_ctloutput = rip_ctloutput,
.pr_usrreqs = &rip_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_IGMP,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = igmp_input,
.pr_ctloutput = rip_ctloutput,
.pr_fasttimo = igmp_fasttimo,
.pr_slowtimo = igmp_slowtimo,
.pr_usrreqs = &rip_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_RSVP,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = rsvp_input,
.pr_ctloutput = rip_ctloutput,
.pr_usrreqs = &rip_usrreqs
Made TCPDEBUG truely optional. Based on changes I made in FreeBSD 1.1.5. Fixed somebody's idea of a joke - about the first half of the lines in in_proto.c were spaced over by one space.
1994-09-15 10:36:56 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_IPV4,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap4_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = encap_init,
.pr_usrreqs = &rip_usrreqs
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_MOBILE,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap4_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = encap_init,
.pr_usrreqs = &rip_usrreqs
Add a new gre(4) driver, which could be used to create GRE (RFC1701) and MOBILE (RFC2004) IP tunnels. Obrained from: NetBSD
2002-09-06 17:12:50 +00:00
},
Add RFC 3378 EtherIP support. This change makes it possible to add gif interfaces to bridges, which will then send and receive IP protocol 97 packets. Packets are Ethernet frames with an EtherIP header prepended. Obtained from: NetBSD MFC after: 2 weeks
2005-12-21 21:29:45 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_ETHERIP,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap4_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = encap_init,
.pr_usrreqs = &rip_usrreqs
},
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_GRE,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap4_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = encap_init,
.pr_usrreqs = &rip_usrreqs
Add a new gre(4) driver, which could be used to create GRE (RFC1701) and MOBILE (RFC2004) IP tunnels. Obrained from: NetBSD
2002-09-06 17:12:50 +00:00
},
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
# ifdef INET6
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_IPV6,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
.pr_input = encap4_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = encap_init,
.pr_usrreqs = &rip_usrreqs
udp IPv6 support, IPv6/IPv4 tunneling support in kernel, packet divert at kernel for IPv6/IPv4 translater daemon This includes queue related patch submitted by jburkhol@home.com. Submitted by: queue related patch from jburkhol@home.com Reviewed by: freebsd-arch, cvs-committers Obtained from: KAME project
1999-12-07 17:39:16 +00:00
},
#endif
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_protocol = IPPROTO_PIM,
.pr_flags = PR_ATOMIC|PR_ADDR|PR_LASTHDR,
Build PIM by default as part of the IPv4 multicast forwarding path. Make PIM dynamically loadable by using encap_attach_func(). PIM may now be loaded into a GENERIC kernel. Tested with: ports/net/pimdd && tcpreplay && wireshark Reviewed by: Pavlin Radoslavov
2007-02-10 13:59:13 +00:00
.pr_input = encap4_input,
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
.pr_ctloutput = rip_ctloutput,
.pr_usrreqs = &rip_usrreqs
1. Basic PIM kernel support Disabled by default. To enable it, the new "options PIM" must be added to the kernel configuration file (in addition to MROUTING): options MROUTING # Multicast routing options PIM # Protocol Independent Multicast 2. Add support for advanced multicast API setup/configuration and extensibility. 3. Add support for kernel-level PIM Register encapsulation. Disabled by default. Can be enabled by the advanced multicast API. 4. Implement a mechanism for "multicast bandwidth monitoring and upcalls". Submitted by: Pavlin Radoslavov <pavlin@icir.org>
2003-08-07 18:16:59 +00:00
},
Make use of the PROTO_SPACER functionality for dynamically loadable protocols in inetsw[] and define initially eight spacer slots. Remove conflicting declaration 'struct pr_usrreqs nousrreqs'. It is now declared and initialized in kern/uipc_domain.c.
2004-10-19 15:58:22 +00:00
/* Spacer n-times for loadable protocols. */
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
IPPROTOSPACER,
/* raw wildcard */
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
{
.pr_type = SOCK_RAW,
.pr_domain = &inetdomain,
.pr_flags = PR_ATOMIC|PR_ADDR,
.pr_input = rip_input,
.pr_ctloutput = rip_ctloutput,
.pr_init = rip_init,
.pr_usrreqs = &rip_usrreqs
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
},
};
Remove __P.
2002-03-19 21:25:46 +00:00
extern int in_inithead(void **, int);
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
extern int in_detachhead(void **, int);
Add code to be a bit smarter about IP routes, conditioned on the option IN_RMX. (Eventually this will be standard, but I just wrote the code today and don't want to break anyone.)
1994-11-02 04:41:39 +00:00
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
struct domain inetdomain = {
.dom_family = AF_INET,
.dom_name = "internet",
.dom_protosw = inetsw,
kernel: use our nitems() macro when it is available through param.h. No functional change, only trivial cases are done in this sweep, Discussed in: freebsd-current
2016-04-19 23:48:27 +00:00
.dom_protoswNPROTOSW = &inetsw[nitems(inetsw)],
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#ifdef RADIX_MPATH
.dom_rtattach = rn4_mpath_inithead,
#else
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
.dom_rtattach = in_inithead,
Introduce an infrastructure for dismantling vnet instances. Vnet modules and protocol domains may now register destructor functions to clean up and release per-module state. The destructor mechanisms can be triggered by invoking "vimage -d", or a future equivalent command which will be provided via the new jail framework. While this patch introduces numerous placeholder destructor functions, many of those are currently incomplete, thus leaking memory or (even worse) failing to stop all running timers. Many of such issues are already known and will be incrementaly fixed over the next weeks in smaller incremental commits. Apart from introducing new fields in structs ifnet, domain, protosw and vnet_net, which requires the kernel and modules to be rebuilt, this change should have no impact on nooptions VIMAGE builds, since vnet destructors can only be called in VIMAGE kernels. Moreover, destructor functions should be in general compiled in only in options VIMAGE builds, except for kernel modules which can be safely kldunloaded at run time. Bump __FreeBSD_version to 800097. Reviewed by: bz, julian Approved by: rwatson, kib (re), julian (mentor)
2009-06-08 17:15:40 +00:00
#endif
#ifdef VIMAGE
.dom_rtdetach = in_detachhead,
This patch provides the back end support for equal-cost multi-path (ECMP) for both IPv4 and IPv6. Previously, multipath route insertion is disallowed. For example, route add -net 192.103.54.0/24 10.9.44.1 route add -net 192.103.54.0/24 10.9.44.2 The second route insertion will trigger an error message of "add net 192.103.54.0/24: gateway 10.2.5.2: route already in table" Multiple default routes can also be inserted. Here is the netstat output: default 10.2.5.1 UGS 0 3074 bge0 => default 10.2.5.2 UGS 0 0 bge0 When multipath routes exist, the "route delete" command requires a specific gateway to be specified or else an error message would be displayed. For example, route delete default would fail and trigger the following error message: "route: writing to routing socket: No such process" "delete net default: not in table" On the other hand, route delete default 10.2.5.2 would be successful: "delete net default: gateway 10.2.5.2" One does not have to specify a gateway if there is only a single route for a particular destination. I need to perform more testings on address aliases and multiple interfaces that have the same IP prefixes. This patch as it stands today is not yet ready for prime time. Therefore, the ECMP code fragments are fully guarded by the RADIX_MPATH macro. Include the "options RADIX_MPATH" in the kernel configuration to enable this feature. Reviewed by: robert, sam, gnn, julian, kmacy
2008-04-13 05:45:14 +00:00
#endif
This main goals of this project are: 1. separating L2 tables (ARP, NDP) from the L3 routing tables 2. removing as much locking dependencies among these layers as possible to allow for some parallelism in the search operations 3. simplify the logic in the routing code, The most notable end result is the obsolescent of the route cloning (RTF_CLONING) concept, which translated into code reduction in both IPv4 ARP and IPv6 NDP related modules, and size reduction in struct rtentry{}. The change in design obsoletes the semantics of RTF_CLONING, RTF_WASCLONE and RTF_LLINFO routing flags. The userland applications such as "arp" and "ndp" have been modified to reflect those changes. The output from "netstat -r" shows only the routing entries. Quite a few developers have contributed to this project in the past: Glebius Smirnoff, Luigi Rizzo, Alessandro Cerri, and Andre Oppermann. And most recently: - Kip Macy revised the locking code completely, thus completing the last piece of the puzzle, Kip has also been conducting active functional testing - Sam Leffler has helped me improving/refactoring the code, and provided valuable reviews - Julian Elischer setup the perforce tree for me and has helped me maintaining that branch before the svn conversion
2008-12-15 06:10:57 +00:00
.dom_ifattach = in_domifattach,
.dom_ifdetach = in_domifdetach
Use sparse initializers for "struct domain" and "struct protosw", so they are easier to follow for the human being.
2005-11-09 13:29:16 +00:00
};
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Introduce and use a sysinit-based initialization scheme for virtual network stacks, VNET_SYSINIT: - Add VNET_SYSINIT and VNET_SYSUNINIT macros to declare events that will occur each time a network stack is instantiated and destroyed. In the !VIMAGE case, these are simply mapped into regular SYSINIT/SYSUNINIT. For the VIMAGE case, we instead use SYSINIT's to track their order and properties on registration, using them for each vnet when created/ destroyed, or immediately on module load for already-started vnets. - Remove vnet_modinfo mechanism that existed to serve this purpose previously, as well as its dependency scheme: we now just use the SYSINIT ordering scheme. - Implement VNET_DOMAIN_SET() to allow protocol domains to declare that they want init functions to be called for each virtual network stack rather than just once at boot, compiling down to DOMAIN_SET() in the non-VIMAGE case. - Walk all virtualized kernel subsystems and make use of these instead of modinfo or DOMAIN_SET() for init/uninit events. In some cases, convert modular components from using modevent to using sysinit (where appropriate). In some cases, do minor rejuggling of SYSINIT ordering to make room for or better manage events. Portions submitted by: jhb (VNET_SYSINIT), bz (cleanup) Discussed with: jhb, bz, julian, zec Reviewed by: bz Approved by: re (VIMAGE blanket)
2009-07-23 20:46:49 +00:00
VNET_DOMAIN_SET(inet);
Make in_proto.c dependent on either inet or inet6. While it does not provide any functionality for IPv6, it provides the sysctl nodes for net.inet.* that a lot of functionality shared between IPv4 and IPv6 depends on. We cannot change these anymore without breaking a lot of management and tuning. In case of IPv6 only, we compile out everything but the sysctl node declarations. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC After: 5 days
2011-04-17 16:35:16 +00:00
#endif /* INET */
Make networking domains drop-ins, through the magic of GNU ld. (Some day, there may even be LKMs.) Also, change the internal name of `unixdomain' to `localdomain' since AF_LOCAL is now the preferred name of this family. Declare netisr correctly and in the right place.
1995-05-11 00:13:26 +00:00
in_proto.c: spell ``Internet'' right and put whitespace after commas. others: start to populate the link-layer branch of the net mib, by moving ARP to its proper place. (ARP is not a protocol family, it's an interface layer between a medium-access layer and a protocol family.) sysctl(8) needs to be taught about the structure of this branch, unless Poul-Henning implements dynamic MIB exploration soon.
1995-12-20 21:53:53 +00:00
SYSCTL_NODE(_net, PF_INET, inet, CTLFLAG_RW, 0,
"Internet Family");
Start adding new style sysctl here too.
1995-11-09 20:23:09 +00:00
in_proto.c: spell ``Internet'' right and put whitespace after commas. others: start to populate the link-layer branch of the net mib, by moving ARP to its proper place. (ARP is not a protocol family, it's an interface layer between a medium-access layer and a protocol family.) sysctl(8) needs to be taught about the structure of this branch, unless Poul-Henning implements dynamic MIB exploration soon.
1995-12-20 21:53:53 +00:00
SYSCTL_NODE(_net_inet, IPPROTO_IP, ip, CTLFLAG_RW, 0, "IP");
SYSCTL_NODE(_net_inet, IPPROTO_ICMP, icmp, CTLFLAG_RW, 0, "ICMP");
SYSCTL_NODE(_net_inet, IPPROTO_UDP, udp, CTLFLAG_RW, 0, "UDP");
SYSCTL_NODE(_net_inet, IPPROTO_TCP, tcp, CTLFLAG_RW, 0, "TCP");
Ok, here it is, we finally add SCTP to current. Note that this work is not just mine, but it is also the works of Peter Lei and Michael Tuexen. They both are my two key other developers working on the project.. and they need ata-boy's too: **** peterlei@cisco.com tuexen@fh-muenster.de **** I did do a make sysent which updated the syscall's and sysproto.. I hope that is correct... without it you don't build since we have new syscalls for SCTP :-0 So go out and look at the NOTES, add option SCTP (make sure inet and inet6 are present too) and play with SCTP. I will see about comitting some test tools I have after I figure out where I should place them. I also have a lib (libsctp.a) that adds some of the missing socketapi functions that I need to put into lib's.. I will talk to George about this :-) There may still be some 64 bit issues in here, none of us have a 64 bit processor to test with yet.. Michael may have a MAC but thats another beast too.. If you have a mac and want to use SCTP contact Michael he maintains a web site with a loadable module with this code :-) Reviewed by: gnn Approved by: gnn
2006-11-03 15:23:16 +00:00
#ifdef SCTP
SYSCTL_NODE(_net_inet, IPPROTO_SCTP, sctp, CTLFLAG_RW, 0, "SCTP");
#endif
in_proto.c: spell ``Internet'' right and put whitespace after commas. others: start to populate the link-layer branch of the net mib, by moving ARP to its proper place. (ARP is not a protocol family, it's an interface layer between a medium-access layer and a protocol family.) sysctl(8) needs to be taught about the structure of this branch, unless Poul-Henning implements dynamic MIB exploration soon.
1995-12-20 21:53:53 +00:00
SYSCTL_NODE(_net_inet, IPPROTO_IGMP, igmp, CTLFLAG_RW, 0, "IGMP");
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#if defined(IPSEC) || defined(IPSEC_SUPPORT)
Tie new "Fast IPsec" code into the build. This involves the usual configuration stuff as well as conditional code in the IPv4 and IPv6 areas. Everything is conditional on FAST_IPSEC which is mutually exclusive with IPSEC (KAME IPsec implmentation). As noted previously, don't use FAST_IPSEC with INET6 at the moment. Reviewed by: KAME, rwatson Approved by: silence Supported by: Vernier Networks
2002-10-16 02:25:05 +00:00
/* XXX no protocol # to use, pick something "reserved" */
SYSCTL_NODE(_net_inet, 253, ipsec, CTLFLAG_RW, 0, "IPSEC");
SYSCTL_NODE(_net_inet, IPPROTO_AH, ah, CTLFLAG_RW, 0, "AH");
SYSCTL_NODE(_net_inet, IPPROTO_ESP, esp, CTLFLAG_RW, 0, "ESP");
SYSCTL_NODE(_net_inet, IPPROTO_IPCOMP, ipcomp, CTLFLAG_RW, 0, "IPCOMP");
SYSCTL_NODE(_net_inet, IPPROTO_IPIP, ipip, CTLFLAG_RW, 0, "IPIP");
Commit the change from FAST_IPSEC to IPSEC. The FAST_IPSEC option is now deprecated, as well as the KAME IPsec code. What was FAST_IPSEC is now IPSEC. Approved by: re Sponsored by: Secure Computing
2007-07-03 12:13:45 +00:00
#endif /* IPSEC */
Convert raw IP from mondo-switch-statement-from-Hell to pr_usrreqs. Collapse duplicates with udp_usrreq.c and tcp_usrreq.c (calling the generic routines in uipc_socket2.c and in_pcb.c). Calling sockaddr()_ or peeraddr() on a detached socket now traps, rather than harmlessly returning an error; this should never happen. Allow the raw IP buffer sizes to be controlled via sysctl.
1997-02-18 20:46:36 +00:00
SYSCTL_NODE(_net_inet, IPPROTO_RAW, raw, CTLFLAG_RW, 0, "RAW");
The accept filter code is not specific to the FreeBSD IPv4 network stack, so it really should not be under "optional inet". The fact that uipc_accf.c lives under kern/ lends some weight to making it a "standard" file. Moving kern/uipc_accf.c from "optional inet" to "standard" eliminates the need for #ifdef INET in kern/uipc_socket.c. Also, this meant the net.inet.accf.unloadable sysctl needed to move, as net.inet does not exist without networking compiled in (as it lives in netinet/in_proto.c.) The new sysctl has been named net.accf.unloadable. In order to support existing accept filter sysctls, the net.inet.accf node has been added netinet/in_proto.c. Submitted by: Steve Kiernan <stevek@juniper.net> Obtained from: Juniper Networks, Inc.
2014-07-26 19:27:34 +00:00
SYSCTL_NODE(_net_inet, OID_AUTO, accf, CTLFLAG_RW, 0,
"Accept filters");
Reference in New Issue Copy Permalink