freebsd-dev/sys/arm/allwinner/a20/files.a20

# $FreeBSD$

arm/allwinner/a20/a20_padconf.c		standard
arm/allwinner/clkng/ccu_a10.c		standard
Bring initial support for Allwinner A20 SoC (Cubieboard2). Add support for A20 timer. Correct interrupt offset depending from chip. Add basic code for CPU configuration module. For now, add kernel config and dts file (only FDT blob related problem needs to be solved later in order to have one kernel for both cubieboard1 and 2). Approved by: ray@ 2013-08-07 11:07:56 +00:00			`# $FreeBSD$`

Move the Allwinner kernels to use fdt_pinctrl. This will read the pin configuration from the FDT data, then set the pins into the requested state. As part of this the gpio controller now reports the correct number of pins instead of returning the number of bank * 32. To allow for a future consolidated kernel we add the SOC_ALLWINNER_A10 and SOC_ALLWINNER_A20 kernel options. These need to be set as appropriate for the SoC the kernel will boot on. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D5177 2016-02-17 18:28:03 +00:00			`arm/allwinner/a20/a20_padconf.c standard`
aw_ccung: Add a10/a20 support Note: At this time, this has only been tested on a single board from one of the supported SoCs. This is enough to boot the board from MMC and have functional USB- which is still an improvement over where we were at just before with no functional clocks. Differential Revision: https://reviews.freebsd.org/D15810 2018-06-14 17:50:29 +00:00			`arm/allwinner/clkng/ccu_a10.c standard`