d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ceef8f2477
freebsd-dev/sys/net/if_enc.c

380 lines
8.9 KiB
C
Raw Normal View History

Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
/*-
* Copyright (c) 2006 The FreeBSD Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_enc.h"
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <sys/socket.h>
#include <sys/sockio.h>
#include <sys/sysctl.h>
#include <net/if.h>
#include <net/if_clone.h>
#include <net/if_types.h>
#include <net/pfil.h>
#include <net/route.h>
#include <net/netisr.h>
#include <net/bpf.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/in_var.h>
#ifdef INET6
#include <netinet/ip6.h>
#include <netinet6/ip6_var.h>
#endif
#include <netipsec/ipsec.h>
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
#include <netipsec/xform.h>
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#define ENCMTU (1024+512)
/* XXX this define must have the same value as in OpenBSD */
#define M_CONF 0x0400 /* payload was encrypted (ESP-transport) */
#define M_AUTH 0x0800 /* payload was authenticated (AH or ESP auth) */
#define M_AUTH_AH 0x2000 /* header was authenticated (AH) */
struct enchdr {
u_int32_t af;
u_int32_t spi;
u_int32_t flags;
};
Increase statistic counters for enc0 interface when enabled and processing IPSec traffic. Approved by: gnn (mentor) MFC after: 1 week
2008-08-12 09:05:01 +00:00
struct ifnet *encif;
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
static struct mtx enc_mtx;
struct enc_softc {
struct ifnet *sc_ifp;
};
static int enc_ioctl(struct ifnet *, u_long, caddr_t);
static int enc_output(struct ifnet *ifp, struct mbuf *m,
Change if_output to take a struct route as its fourth argument in order to allow passing a cached struct llentry * down to L2 Reviewed by: rwatson
2009-04-16 20:30:28 +00:00
struct sockaddr *dst, struct route *ro);
Catch up with the revised network interface cloning which takes an optional opaque parameter that can specify configuration parameters.
2006-07-10 05:24:06 +00:00
static int enc_clone_create(struct if_clone *, int, caddr_t);
Fix a braino in the last revision, enc_clone_destroy needs return void instead of int. The clone system will ensure that our first interface is not destroyed so we dont need the extra checking anyway. Tested by: Scott Ullrich
2006-07-04 23:09:11 +00:00
static void enc_clone_destroy(struct ifnet *);
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
IFC_SIMPLE_DECLARE(enc, 1);
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
/*
* Sysctls.
*/
/*
* Before and after are relative to when we are stripping the
* outer IP header.
*/
SYSCTL_NODE(_net, OID_AUTO, enc, CTLFLAG_RW, 0, "enc sysctl");
SYSCTL_NODE(_net_enc, OID_AUTO, in, CTLFLAG_RW, 0, "enc input sysctl");
static int ipsec_filter_mask_in = ENC_BEFORE;
sysctl(8) should use the CTLTYPE to determine the type of data when reading. (This was already done for writing to a sysctl). This requires all SYSCTL setups to specify a type. Most of them are now checked at compile-time. Remove SYSCTL_*X* sysctl additions as the print being in hex should be controlled by the -x flag to sysctl(8). Succested by: bde
2011-01-19 17:04:07 +00:00
SYSCTL_INT(_net_enc_in, OID_AUTO, ipsec_filter_mask, CTLFLAG_RW,
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
&ipsec_filter_mask_in, 0, "IPsec input firewall filter mask");
static int ipsec_bpf_mask_in = ENC_BEFORE;
sysctl(8) should use the CTLTYPE to determine the type of data when reading. (This was already done for writing to a sysctl). This requires all SYSCTL setups to specify a type. Most of them are now checked at compile-time. Remove SYSCTL_*X* sysctl additions as the print being in hex should be controlled by the -x flag to sysctl(8). Succested by: bde
2011-01-19 17:04:07 +00:00
SYSCTL_INT(_net_enc_in, OID_AUTO, ipsec_bpf_mask, CTLFLAG_RW,
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
&ipsec_bpf_mask_in, 0, "IPsec input bpf mask");
SYSCTL_NODE(_net_enc, OID_AUTO, out, CTLFLAG_RW, 0, "enc output sysctl");
static int ipsec_filter_mask_out = ENC_BEFORE;
sysctl(8) should use the CTLTYPE to determine the type of data when reading. (This was already done for writing to a sysctl). This requires all SYSCTL setups to specify a type. Most of them are now checked at compile-time. Remove SYSCTL_*X* sysctl additions as the print being in hex should be controlled by the -x flag to sysctl(8). Succested by: bde
2011-01-19 17:04:07 +00:00
SYSCTL_INT(_net_enc_out, OID_AUTO, ipsec_filter_mask, CTLFLAG_RW,
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
&ipsec_filter_mask_out, 0, "IPsec output firewall filter mask");
static int ipsec_bpf_mask_out = ENC_BEFORE|ENC_AFTER;
sysctl(8) should use the CTLTYPE to determine the type of data when reading. (This was already done for writing to a sysctl). This requires all SYSCTL setups to specify a type. Most of them are now checked at compile-time. Remove SYSCTL_*X* sysctl additions as the print being in hex should be controlled by the -x flag to sysctl(8). Succested by: bde
2011-01-19 17:04:07 +00:00
SYSCTL_INT(_net_enc_out, OID_AUTO, ipsec_bpf_mask, CTLFLAG_RW,
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
&ipsec_bpf_mask_out, 0, "IPsec output bpf mask");
Fix a braino in the last revision, enc_clone_destroy needs return void instead of int. The clone system will ensure that our first interface is not destroyed so we dont need the extra checking anyway. Tested by: Scott Ullrich
2006-07-04 23:09:11 +00:00
static void
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
enc_clone_destroy(struct ifnet *ifp)
{
Fix a braino in the last revision, enc_clone_destroy needs return void instead of int. The clone system will ensure that our first interface is not destroyed so we dont need the extra checking anyway. Tested by: Scott Ullrich
2006-07-04 23:09:11 +00:00
KASSERT(ifp != encif, ("%s: destroying encif", __func__));
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
bpfdetach(ifp);
if_detach(ifp);
if_free(ifp);
}
static int
Catch up with the revised network interface cloning which takes an optional opaque parameter that can specify configuration parameters.
2006-07-10 05:24:06 +00:00
enc_clone_create(struct if_clone *ifc, int unit, caddr_t params)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
{
struct ifnet *ifp;
struct enc_softc *sc;
sc = malloc(sizeof(*sc), M_DEVBUF, M_WAITOK|M_ZERO);
ifp = sc->sc_ifp = if_alloc(IFT_ENC);
if (ifp == NULL) {
free(sc, M_DEVBUF);
return (ENOSPC);
}
if_initname(ifp, ifc->ifc_name, unit);
ifp->if_mtu = ENCMTU;
ifp->if_ioctl = enc_ioctl;
ifp->if_output = enc_output;
ifp->if_snd.ifq_maxlen = ifqmaxlen;
ifp->if_softc = sc;
if_attach(ifp);
Simplify ipsec_bpf by using bpf_mtap2().
2006-06-27 01:53:12 +00:00
bpfattach(ifp, DLT_ENC, sizeof(struct enchdr));
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
mtx_lock(&enc_mtx);
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
/* grab a pointer to enc0, ignore the rest */
if (encif == NULL)
encif = ifp;
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
mtx_unlock(&enc_mtx);
return (0);
}
static int
enc_modevent(module_t mod, int type, void *data)
{
switch (type) {
case MOD_LOAD:
mtx_init(&enc_mtx, "enc mtx", NULL, MTX_DEF);
if_clone_attach(&enc_cloner);
break;
case MOD_UNLOAD:
printf("enc module unload - not possible for this module\n");
return (EINVAL);
default:
return (EOPNOTSUPP);
}
return (0);
}
static moduledata_t enc_mod = {
"enc",
enc_modevent,
0
};
DECLARE_MODULE(enc, enc_mod, SI_SUB_PROTO_IFATTACHDOMAIN, SI_ORDER_ANY);
static int
enc_output(struct ifnet *ifp, struct mbuf *m, struct sockaddr *dst,
Change if_output to take a struct route as its fourth argument in order to allow passing a cached struct llentry * down to L2 Reviewed by: rwatson
2009-04-16 20:30:28 +00:00
struct route *ro)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
{
m_freem(m);
return (0);
}
/*
* Process an ioctl request.
*/
/* ARGSUSED */
static int
enc_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
{
int error = 0;
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
mtx_lock(&enc_mtx);
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
switch (cmd) {
case SIOCSIFFLAGS:
if (ifp->if_flags & IFF_UP)
ifp->if_drv_flags |= IFF_DRV_RUNNING;
else
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
break;
default:
error = EINVAL;
}
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
mtx_unlock(&enc_mtx);
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
return (error);
}
int
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
ipsec_filter(struct mbuf **mp, int dir, int flags)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
{
int error, i;
struct ip *ip;
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
KASSERT(encif != NULL, ("%s: encif is null", __func__));
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
KASSERT(flags & (ENC_IN|ENC_OUT),
("%s: invalid flags: %04x", __func__, flags));
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
if ((encif->if_drv_flags & IFF_DRV_RUNNING) == 0)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
return (0);
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
if (flags & ENC_IN) {
if ((flags & ipsec_filter_mask_in) == 0)
return (0);
} else {
if ((flags & ipsec_filter_mask_out) == 0)
return (0);
}
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
/* Skip pfil(9) if no filters are loaded */
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
if (1
#ifdef INET
&& !PFIL_HOOKED(&V_inet_pfil_hook)
#endif
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#ifdef INET6
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
&& !PFIL_HOOKED(&V_inet6_pfil_hook)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#endif
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
) {
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
return (0);
}
i = min((*mp)->m_pkthdr.len, max_protohdr);
if ((*mp)->m_len < i) {
*mp = m_pullup(*mp, i);
if (*mp == NULL) {
printf("%s: m_pullup failed\n", __func__);
return (-1);
}
}
error = 0;
ip = mtod(*mp, struct ip *);
switch (ip->ip_v) {
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
#ifdef INET
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
case 4:
/*
* before calling the firewall, swap fields the same as
* IP does. here we assume the header is contiguous
*/
ip->ip_len = ntohs(ip->ip_len);
ip->ip_off = ntohs(ip->ip_off);
Unbreak the VIMAGE build with IPSEC, broken with r197952 by virtualizing the pfil hooks. For consistency add the V_ to virtualize the pfil hooks in here as well. MFC after: 55 days X-MFC after: julian MFCed r197952.
2009-10-14 11:55:55 +00:00
error = pfil_run_hooks(&V_inet_pfil_hook, mp,
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
encif, dir, NULL);
if (*mp == NULL || error != 0)
break;
/* restore byte ordering */
ip = mtod(*mp, struct ip *);
ip->ip_len = htons(ip->ip_len);
ip->ip_off = htons(ip->ip_off);
break;
Make various (pseudo) interfaces compile without INET in the kernel adding appropriate #ifdefs. For module builds the framework needs adjustments for at least carp. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:30:44 +00:00
#endif
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
#ifdef INET6
case 6:
Unbreak the VIMAGE build with IPSEC, broken with r197952 by virtualizing the pfil hooks. For consistency add the V_ to virtualize the pfil hooks in here as well. MFC after: 55 days X-MFC after: julian MFCed r197952.
2009-10-14 11:55:55 +00:00
error = pfil_run_hooks(&V_inet6_pfil_hook, mp,
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
encif, dir, NULL);
break;
#endif
default:
printf("%s: unknown IP version\n", __func__);
}
Fix a panic where if the mbuf was consumed by the filter for requeueing (dummynet), ipsec_filter() would return the empty error code and the ipsec code would continue to forward/deference the null mbuf. Found by: m0n0wall Reviewed by: bz MFC after: 3 days
2007-12-26 08:41:58 +00:00
/*
* If the mbuf was consumed by the filter for requeueing (dummynet, etc)
* then error will be zero but we still want to return an error to our
* caller so the null mbuf isn't forwarded further.
*/
if (*mp == NULL && error == 0)
return (-1); /* Consumed by the filter */
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
if (*mp == NULL)
return (error);
if (error != 0)
goto bad;
return (error);
bad:
m_freem(*mp);
*mp = NULL;
return (error);
}
void
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
ipsec_bpf(struct mbuf *m, struct secasvar *sav, int af, int flags)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
{
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
int mflags;
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
struct enchdr hdr;
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
KASSERT(encif != NULL, ("%s: encif is null", __func__));
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
KASSERT(flags & (ENC_IN|ENC_OUT),
("%s: invalid flags: %04x", __func__, flags));
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
A small race existed where the lock was dropped between when encif was tested and then set. [1] Reorganise things to eliminate this, we now ensure that enc0 can not be destroyed which as the benefit of no longer needing to lock in ipsec_filter and ipsec_bpf. The cloner will create one interface during the init so we can guarantee that encif will be valid before any SPD entries are added to ipsec. Spotted by: glebius [1]
2006-06-28 21:57:35 +00:00
if ((encif->if_drv_flags & IFF_DRV_RUNNING) == 0)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
return;
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
if (flags & ENC_IN) {
if ((flags & ipsec_bpf_mask_in) == 0)
return;
} else {
if ((flags & ipsec_bpf_mask_out) == 0)
return;
}
Various bpf(4) related fixes to catch places up to the new bpf(4) semantics. - Stop testing bpf pointers for NULL. In some cases use bpf_peers_present() and then call the function directly inside the conditional block instead of the macro. - For places where the entire conditional block is the macro, remove the test and make the macro unconditional. - Use BPF_MTAP() in if_pfsync on FreeBSD instead of an expanded version of the old semantics. Reviewed by: csjp (older version)
2006-12-29 13:59:50 +00:00
if (bpf_peers_present(encif->if_bpf)) {
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
mflags = 0;
hdr.spi = 0;
if (!sav) {
struct m_tag *mtag;
mtag = m_tag_find(m, PACKET_TAG_IPSEC_IN_DONE, NULL);
if (mtag != NULL) {
struct tdb_ident *tdbi;
tdbi = (struct tdb_ident *) (mtag + 1);
if (tdbi->alg_enc != SADB_EALG_NONE)
mflags |= M_CONF;
if (tdbi->alg_auth != SADB_AALG_NONE)
mflags |= M_AUTH;
hdr.spi = tdbi->spi;
}
} else {
if (sav->alg_enc != SADB_EALG_NONE)
mflags |= M_CONF;
if (sav->alg_auth != SADB_AALG_NONE)
mflags |= M_AUTH;
hdr.spi = sav->spi;
}
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
/*
* We need to prepend the address family as a four byte
* field. Cons up a dummy header to pacify bpf. This
* is safe because bpf will only read from the mbuf
* (i.e., it won't try to free it or keep a pointer a
* to it).
*/
hdr.af = af;
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
/* hdr.spi already set above */
hdr.flags = mflags;
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
Simplify ipsec_bpf by using bpf_mtap2().
2006-06-27 01:53:12 +00:00
bpf_mtap2(encif->if_bpf, &hdr, sizeof(hdr), m);
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
}
}
Reference in New Issue Copy Permalink