freebsd-dev/sys/x86/iommu/intel_qi.c

473 lines
13 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2013 The FreeBSD Foundation
* All rights reserved.
*
* This software was developed by Konstantin Belousov <kib@FreeBSD.org>
* under sponsorship from the FreeBSD Foundation.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/memdesc.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <sys/taskqueue.h>
#include <sys/time.h>
#include <sys/tree.h>
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
#include <sys/vmem.h>
#include <machine/bus.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/vm_kern.h>
#include <vm/vm_page.h>
#include <vm/vm_map.h>
#include <machine/cpu.h>
#include <x86/include/busdma_impl.h>
#include <x86/iommu/intel_reg.h>
#include <x86/iommu/busdma_dmar.h>
#include <x86/iommu/intel_dmar.h>
static bool
dmar_qi_seq_processed(const struct dmar_unit *unit,
const struct dmar_qi_genseq *pseq)
{
return (pseq->gen < unit->inv_waitd_gen ||
(pseq->gen == unit->inv_waitd_gen &&
pseq->seq <= unit->inv_waitd_seq_hw));
}
static int
dmar_enable_qi(struct dmar_unit *unit)
{
int error;
DMAR_ASSERT_LOCKED(unit);
unit->hw_gcmd |= DMAR_GCMD_QIE;
dmar_write4(unit, DMAR_GCMD_REG, unit->hw_gcmd);
DMAR_WAIT_UNTIL(((dmar_read4(unit, DMAR_GSTS_REG) & DMAR_GSTS_QIES)
!= 0));
return (error);
}
static int
dmar_disable_qi(struct dmar_unit *unit)
{
int error;
DMAR_ASSERT_LOCKED(unit);
unit->hw_gcmd &= ~DMAR_GCMD_QIE;
dmar_write4(unit, DMAR_GCMD_REG, unit->hw_gcmd);
DMAR_WAIT_UNTIL(((dmar_read4(unit, DMAR_GSTS_REG) & DMAR_GSTS_QIES)
== 0));
return (error);
}
static void
dmar_qi_advance_tail(struct dmar_unit *unit)
{
DMAR_ASSERT_LOCKED(unit);
dmar_write4(unit, DMAR_IQT_REG, unit->inv_queue_tail);
}
static void
dmar_qi_ensure(struct dmar_unit *unit, int descr_count)
{
uint32_t head;
int bytes;
DMAR_ASSERT_LOCKED(unit);
bytes = descr_count << DMAR_IQ_DESCR_SZ_SHIFT;
for (;;) {
if (bytes <= unit->inv_queue_avail)
break;
/* refill */
head = dmar_read4(unit, DMAR_IQH_REG);
head &= DMAR_IQH_MASK;
unit->inv_queue_avail = head - unit->inv_queue_tail -
DMAR_IQ_DESCR_SZ;
if (head <= unit->inv_queue_tail)
unit->inv_queue_avail += unit->inv_queue_size;
if (bytes <= unit->inv_queue_avail)
break;
/*
* No space in the queue, do busy wait. Hardware must
* make a progress. But first advance the tail to
* inform the descriptor streamer about entries we
* might have already filled, otherwise they could
* clog the whole queue..
*/
dmar_qi_advance_tail(unit);
unit->inv_queue_full++;
cpu_spinwait();
}
unit->inv_queue_avail -= bytes;
}
static void
dmar_qi_emit(struct dmar_unit *unit, uint64_t data1, uint64_t data2)
{
DMAR_ASSERT_LOCKED(unit);
*(volatile uint64_t *)(unit->inv_queue + unit->inv_queue_tail) = data1;
unit->inv_queue_tail += DMAR_IQ_DESCR_SZ / 2;
KASSERT(unit->inv_queue_tail <= unit->inv_queue_size,
("tail overflow 0x%x 0x%jx", unit->inv_queue_tail,
(uintmax_t)unit->inv_queue_size));
unit->inv_queue_tail &= unit->inv_queue_size - 1;
*(volatile uint64_t *)(unit->inv_queue + unit->inv_queue_tail) = data2;
unit->inv_queue_tail += DMAR_IQ_DESCR_SZ / 2;
KASSERT(unit->inv_queue_tail <= unit->inv_queue_size,
("tail overflow 0x%x 0x%jx", unit->inv_queue_tail,
(uintmax_t)unit->inv_queue_size));
unit->inv_queue_tail &= unit->inv_queue_size - 1;
}
static void
dmar_qi_emit_wait_descr(struct dmar_unit *unit, uint32_t seq, bool intr,
bool memw, bool fence)
{
DMAR_ASSERT_LOCKED(unit);
dmar_qi_emit(unit, DMAR_IQ_DESCR_WAIT_ID |
(intr ? DMAR_IQ_DESCR_WAIT_IF : 0) |
(memw ? DMAR_IQ_DESCR_WAIT_SW : 0) |
(fence ? DMAR_IQ_DESCR_WAIT_FN : 0) |
(memw ? DMAR_IQ_DESCR_WAIT_SD(seq) : 0),
memw ? unit->inv_waitd_seq_hw_phys : 0);
}
static void
dmar_qi_emit_wait_seq(struct dmar_unit *unit, struct dmar_qi_genseq *pseq,
bool emit_wait)
{
struct dmar_qi_genseq gsec;
uint32_t seq;
KASSERT(pseq != NULL, ("wait descriptor with no place for seq"));
DMAR_ASSERT_LOCKED(unit);
if (unit->inv_waitd_seq == 0xffffffff) {
gsec.gen = unit->inv_waitd_gen;
gsec.seq = unit->inv_waitd_seq;
dmar_qi_ensure(unit, 1);
dmar_qi_emit_wait_descr(unit, gsec.seq, false, true, false);
dmar_qi_advance_tail(unit);
while (!dmar_qi_seq_processed(unit, &gsec))
cpu_spinwait();
unit->inv_waitd_gen++;
unit->inv_waitd_seq = 1;
}
seq = unit->inv_waitd_seq++;
pseq->gen = unit->inv_waitd_gen;
pseq->seq = seq;
if (emit_wait) {
dmar_qi_ensure(unit, 1);
dmar_qi_emit_wait_descr(unit, seq, true, true, false);
}
}
static void
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_wait_for_seq(struct dmar_unit *unit, const struct dmar_qi_genseq *gseq,
bool nowait)
{
DMAR_ASSERT_LOCKED(unit);
unit->inv_seq_waiters++;
while (!dmar_qi_seq_processed(unit, gseq)) {
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
if (cold || nowait) {
cpu_spinwait();
} else {
msleep(&unit->inv_seq_waiters, &unit->lock, 0,
"dmarse", hz);
}
}
unit->inv_seq_waiters--;
}
void
dmar_qi_invalidate_locked(struct dmar_domain *domain, dmar_gaddr_t base,
dmar_gaddr_t size, struct dmar_qi_genseq *pseq, bool emit_wait)
{
struct dmar_unit *unit;
dmar_gaddr_t isize;
int am;
unit = domain->dmar;
DMAR_ASSERT_LOCKED(unit);
for (; size > 0; base += isize, size -= isize) {
am = calc_am(unit, base, size, &isize);
dmar_qi_ensure(unit, 1);
dmar_qi_emit(unit, DMAR_IQ_DESCR_IOTLB_INV |
DMAR_IQ_DESCR_IOTLB_PAGE | DMAR_IQ_DESCR_IOTLB_DW |
DMAR_IQ_DESCR_IOTLB_DR |
DMAR_IQ_DESCR_IOTLB_DID(domain->domain),
base | am);
}
dmar_qi_emit_wait_seq(unit, pseq, emit_wait);
dmar_qi_advance_tail(unit);
}
void
dmar_qi_invalidate_ctx_glob_locked(struct dmar_unit *unit)
{
struct dmar_qi_genseq gseq;
DMAR_ASSERT_LOCKED(unit);
dmar_qi_ensure(unit, 2);
dmar_qi_emit(unit, DMAR_IQ_DESCR_CTX_INV | DMAR_IQ_DESCR_CTX_GLOB, 0);
dmar_qi_emit_wait_seq(unit, &gseq, true);
dmar_qi_advance_tail(unit);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_wait_for_seq(unit, &gseq, false);
}
void
dmar_qi_invalidate_iotlb_glob_locked(struct dmar_unit *unit)
{
struct dmar_qi_genseq gseq;
DMAR_ASSERT_LOCKED(unit);
dmar_qi_ensure(unit, 2);
dmar_qi_emit(unit, DMAR_IQ_DESCR_IOTLB_INV | DMAR_IQ_DESCR_IOTLB_GLOB |
DMAR_IQ_DESCR_IOTLB_DW | DMAR_IQ_DESCR_IOTLB_DR, 0);
dmar_qi_emit_wait_seq(unit, &gseq, true);
dmar_qi_advance_tail(unit);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_wait_for_seq(unit, &gseq, false);
}
void
dmar_qi_invalidate_iec_glob(struct dmar_unit *unit)
{
struct dmar_qi_genseq gseq;
DMAR_ASSERT_LOCKED(unit);
dmar_qi_ensure(unit, 2);
dmar_qi_emit(unit, DMAR_IQ_DESCR_IEC_INV, 0);
dmar_qi_emit_wait_seq(unit, &gseq, true);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_advance_tail(unit);
dmar_qi_wait_for_seq(unit, &gseq, false);
}
void
dmar_qi_invalidate_iec(struct dmar_unit *unit, u_int start, u_int cnt)
{
struct dmar_qi_genseq gseq;
u_int c, l;
DMAR_ASSERT_LOCKED(unit);
KASSERT(start < unit->irte_cnt && start < start + cnt &&
start + cnt <= unit->irte_cnt,
("inv iec overflow %d %d %d", unit->irte_cnt, start, cnt));
for (; cnt > 0; cnt -= c, start += c) {
l = ffs(start | cnt) - 1;
c = 1 << l;
dmar_qi_ensure(unit, 1);
dmar_qi_emit(unit, DMAR_IQ_DESCR_IEC_INV |
DMAR_IQ_DESCR_IEC_IDX | DMAR_IQ_DESCR_IEC_IIDX(start) |
DMAR_IQ_DESCR_IEC_IM(l), 0);
}
dmar_qi_ensure(unit, 1);
dmar_qi_emit_wait_seq(unit, &gseq, true);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_advance_tail(unit);
/*
* The caller of the function, in particular,
* dmar_ir_program_irte(), may be called from the context
* where the sleeping is forbidden (in fact, the
* intr_table_lock mutex may be held, locked from
* intr_shuffle_irqs()). Wait for the invalidation completion
* using the busy wait.
*
* The impact on the interrupt input setup code is small, the
* expected overhead is comparable with the chipset register
* read. It is more harmful for the parallel DMA operations,
* since we own the dmar unit lock until whole invalidation
* queue is processed, which includes requests possibly issued
* before our request.
*/
dmar_qi_wait_for_seq(unit, &gseq, true);
}
int
dmar_qi_intr(void *arg)
{
struct dmar_unit *unit;
unit = arg;
KASSERT(unit->qi_enabled, ("dmar%d: QI is not enabled", unit->unit));
taskqueue_enqueue(unit->qi_taskqueue, &unit->qi_task);
return (FILTER_HANDLED);
}
static void
dmar_qi_task(void *arg, int pending __unused)
{
struct dmar_unit *unit;
struct dmar_map_entry *entry;
uint32_t ics;
unit = arg;
DMAR_LOCK(unit);
for (;;) {
entry = TAILQ_FIRST(&unit->tlb_flush_entries);
if (entry == NULL)
break;
if (!dmar_qi_seq_processed(unit, &entry->gseq))
break;
TAILQ_REMOVE(&unit->tlb_flush_entries, entry, dmamap_link);
DMAR_UNLOCK(unit);
dmar_domain_free_entry(entry, (entry->flags &
DMAR_MAP_ENTRY_QI_NF) == 0);
DMAR_LOCK(unit);
}
ics = dmar_read4(unit, DMAR_ICS_REG);
if ((ics & DMAR_ICS_IWC) != 0) {
ics = DMAR_ICS_IWC;
dmar_write4(unit, DMAR_ICS_REG, ics);
}
if (unit->inv_seq_waiters > 0)
wakeup(&unit->inv_seq_waiters);
DMAR_UNLOCK(unit);
}
int
dmar_init_qi(struct dmar_unit *unit)
{
uint64_t iqa;
uint32_t ics;
int qi_sz;
if (!DMAR_HAS_QI(unit) || (unit->hw_cap & DMAR_CAP_CM) != 0)
return (0);
unit->qi_enabled = 1;
TUNABLE_INT_FETCH("hw.dmar.qi", &unit->qi_enabled);
if (!unit->qi_enabled)
return (0);
TAILQ_INIT(&unit->tlb_flush_entries);
TASK_INIT(&unit->qi_task, 0, dmar_qi_task, unit);
unit->qi_taskqueue = taskqueue_create_fast("dmarqf", M_WAITOK,
taskqueue_thread_enqueue, &unit->qi_taskqueue);
taskqueue_start_threads(&unit->qi_taskqueue, 1, PI_AV,
"dmar%d qi taskq", unit->unit);
unit->inv_waitd_gen = 0;
unit->inv_waitd_seq = 1;
qi_sz = DMAR_IQA_QS_DEF;
TUNABLE_INT_FETCH("hw.dmar.qi_size", &qi_sz);
if (qi_sz > DMAR_IQA_QS_MAX)
qi_sz = DMAR_IQA_QS_MAX;
unit->inv_queue_size = (1ULL << qi_sz) * PAGE_SIZE;
/* Reserve one descriptor to prevent wraparound. */
unit->inv_queue_avail = unit->inv_queue_size - DMAR_IQ_DESCR_SZ;
/* The invalidation queue reads by DMARs are always coherent. */
unit->inv_queue = kmem_alloc_contig(kernel_arena, unit->inv_queue_size,
M_WAITOK | M_ZERO, 0, dmar_high, PAGE_SIZE, 0, VM_MEMATTR_DEFAULT);
unit->inv_waitd_seq_hw_phys = pmap_kextract(
(vm_offset_t)&unit->inv_waitd_seq_hw);
DMAR_LOCK(unit);
dmar_write8(unit, DMAR_IQT_REG, 0);
iqa = pmap_kextract(unit->inv_queue);
iqa |= qi_sz;
dmar_write8(unit, DMAR_IQA_REG, iqa);
dmar_enable_qi(unit);
ics = dmar_read4(unit, DMAR_ICS_REG);
if ((ics & DMAR_ICS_IWC) != 0) {
ics = DMAR_ICS_IWC;
dmar_write4(unit, DMAR_ICS_REG, ics);
}
dmar_enable_qi_intr(unit);
DMAR_UNLOCK(unit);
return (0);
}
void
dmar_fini_qi(struct dmar_unit *unit)
{
struct dmar_qi_genseq gseq;
if (unit->qi_enabled)
return;
taskqueue_drain(unit->qi_taskqueue, &unit->qi_task);
taskqueue_free(unit->qi_taskqueue);
unit->qi_taskqueue = NULL;
DMAR_LOCK(unit);
/* quisce */
dmar_qi_ensure(unit, 1);
dmar_qi_emit_wait_seq(unit, &gseq, true);
dmar_qi_advance_tail(unit);
Use VT-d interrupt remapping block (IR) to perform FSB messages translation. In particular, despite IO-APICs only take 8bit apic id, IR translation structures accept 32bit APIC Id, which allows x2APIC mode to function properly. Extend msi_cpu of struct msi_intrsrc and io_cpu of ioapic_intsrc to full int from one byte. KPI of IR is isolated into the x86/iommu/iommu_intrmap.h, to avoid bringing all dmar headers into interrupt code. The non-PCI(e) devices which generate message interrupts on FSB require special handling. The HPET FSB interrupts are remapped, while DMAR interrupts are not. For each msi and ioapic interrupt source, the iommu cookie is added, which is in fact index of the IRE (interrupt remap entry) in the IR table. Cookie is made at the source allocation time, and then used at the map time to fill both IRE and device registers. The MSI address/data registers and IO-APIC redirection registers are programmed with the special values which are recognized by IR and used to restore the IRE index, to find proper delivery mode and target. Map all MSI interrupts in the block when msi_map() is called. Since an interrupt source setup and dismantle code are done in the non-sleepable context, flushing interrupt entries cache in the IR hardware, which is done async and ideally waits for the interrupt, requires busy-wait for queue to drain. The dmar_qi_wait_for_seq() is modified to take a boolean argument requesting busy-wait for the written sequence number instead of waiting for interrupt. Some interrupts are configured before IR is initialized, e.g. ACPI SCI. Add intr_reprogram() function to reprogram all already configured interrupts, and call it immediately before an IR unit is enabled. There is still a small window after the IO-APIC redirection entry is reprogrammed with cookie but before the unit is enabled, but to fix this properly, IR must be started much earlier. Add workarounds for 5500 and X58 northbridges, some revisions of which have severe flaws in handling IR. Use the same identification methods as employed by Linux. Review: https://reviews.freebsd.org/D1892 Reviewed by: neel Discussed with: jhb Tested by: glebius, pho (previous versions) Sponsored by: The FreeBSD Foundation MFC after: 3 weeks
2015-03-19 13:57:47 +00:00
dmar_qi_wait_for_seq(unit, &gseq, false);
/* only after the quisce, disable queue */
dmar_disable_qi_intr(unit);
dmar_disable_qi(unit);
KASSERT(unit->inv_seq_waiters == 0,
("dmar%d: waiters on disabled queue", unit->unit));
DMAR_UNLOCK(unit);
kmem_free(kernel_arena, unit->inv_queue, unit->inv_queue_size);
unit->inv_queue = 0;
unit->inv_queue_size = 0;
unit->qi_enabled = 0;
}
void
dmar_enable_qi_intr(struct dmar_unit *unit)
{
uint32_t iectl;
DMAR_ASSERT_LOCKED(unit);
KASSERT(DMAR_HAS_QI(unit), ("dmar%d: QI is not supported", unit->unit));
iectl = dmar_read4(unit, DMAR_IECTL_REG);
iectl &= ~DMAR_IECTL_IM;
dmar_write4(unit, DMAR_IECTL_REG, iectl);
}
void
dmar_disable_qi_intr(struct dmar_unit *unit)
{
uint32_t iectl;
DMAR_ASSERT_LOCKED(unit);
KASSERT(DMAR_HAS_QI(unit), ("dmar%d: QI is not supported", unit->unit));
iectl = dmar_read4(unit, DMAR_IECTL_REG);
dmar_write4(unit, DMAR_IECTL_REG, iectl | DMAR_IECTL_IM);
}