d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d0948af5ae
freebsd-dev/sys/ddb/db_ps.c

171 lines
4.4 KiB
C
Raw Normal View History

ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
/*-
* Copyright (c) 1993 The Regents of the University of California.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
Use __FBSDID().
2003-06-10 22:09:23 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Catch up to header include changes: - <sys/mutex.h> now requires <sys/systm.h> - <sys/mutex.h> and <sys/sx.h> now require <sys/lock.h>
2001-03-28 09:17:56 +00:00
#include <sys/lock.h>
#include <sys/mutex.h>
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
#include <sys/proc.h>
Merge the cons.c and cons.h to the best of my ability. alpha may or may not compile, I can't test it.
1999-08-09 10:35:05 +00:00
#include <sys/cons.h>
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
Reduced and cleaned up #includes.
1995-12-10 19:08:32 +00:00
#include <ddb/ddb.h>
Whitespace nits.
2003-06-06 17:19:27 +00:00
static void dumpthread(volatile struct proc *p, volatile struct thread *td);
Reduced and cleaned up #includes.
1995-12-10 19:08:32 +00:00
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
void
Change db_ps() to have the correct number and type of args for a ddb command.
1995-08-27 02:40:39 +00:00
db_ps(dummy1, dummy2, dummy3, dummy4)
db_expr_t dummy1;
boolean_t dummy2;
db_expr_t dummy3;
char * dummy4;
{
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
volatile struct proc *p, *pp;
Make the flag field in the ps output one char wider to account for recent growth in the number of flags used. Also, if a thread is blocked on a mutex, print the mutex name in the wait channel column.
2001-10-20 03:22:23 +00:00
volatile struct thread *td;
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
char *state;
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
int np, quit;
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
np = nprocs;
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
quit = 0;
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
Commented out locking that would be used in the ps command if locks were used in ddb.
2002-04-11 21:01:34 +00:00
/* sx_slock(&allproc_lock); */
Use macro API for <sys/queue.h>
2000-12-30 22:06:19 +00:00
if (!LIST_EMPTY(&allproc))
p = LIST_FIRST(&allproc);
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
else
p = &proc0;
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
- Change the ddb paging "support" to use a variable (db_lines_per_page) to control the number of lines per page rather than a constant. The variable can be examined and changed in ddb as '$lines'. Setting the variable to 0 will effectively turn off paging. - Change db_putchar() to force out pending whitespace before outputting newlines and carriage returns so that one can rub out content on the current line via '\r \r' type strings. - Change the simple pager to rub out the --More-- prompt explicitly when the routine exits. - Add some aliases to the simple pager to make it more compatible with more(1): 'e' and 'j' do a single line. 'd' does half a page, and 'f' does a full page. MFC after: 1 month Inspired by: kris
2004-11-01 22:15:15 +00:00
db_setup_paging(db_simple_pager, &quit, db_lines_per_page);
Remove the uarea column from the DDB 'ps' display, and from grog's gdb scripts. Reviewed by: arch@
2004-11-20 02:32:42 +00:00
db_printf(" pid proc uid ppid pgrp flag stat wmesg wchan cmd\n");
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
while (--np >= 0 && !quit) {
A small bit of defensive programming in case the panic is during process exit and cleanup. the 'ps' command assumes that there are always 'nproc' processes on the lists and will walk off the end without checking if not, causing ddb to trap during the 'ps' command.
1996-06-15 07:08:02 +00:00
if (p == NULL) {
printf("oops, ran out of processes early!\n");
break;
}
Commented out locking that would be used in the ps command if locks were used in ddb.
2002-04-11 21:01:34 +00:00
/* PROC_LOCK(p); */
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
pp = p->p_pptr;
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
if (pp == NULL)
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
pp = p;
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
switch(p->p_state) {
case PRS_NORMAL:
if (P_SHOULDSTOP(p))
Realign columns in DDB's ps output. Don't waste more horizontal space than necessary.
2002-08-13 11:06:54 +00:00
state = "stop";
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
else
Attempt to crunch down the thread state info so that it is more likely to fit on one line. Account for threads better. * No need to report that it is on a sleep queue if it is actually sleeping * "Normal" state is almost ubiquitous.. only report abnormal states. * increment the #lines count for each separate thread shown in threaded programs. makes it less likely that a threaded program will make all the data on a screen overflow off the top of the screen.
2003-06-06 20:28:11 +00:00
state = "";
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
break;
case PRS_NEW:
Realign columns in DDB's ps output. Don't waste more horizontal space than necessary.
2002-08-13 11:06:54 +00:00
state = "new ";
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
break;
case PRS_ZOMBIE:
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
state = "zomb";
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
break;
default:
Realign columns in DDB's ps output. Don't waste more horizontal space than necessary.
2002-08-13 11:06:54 +00:00
state = "Unkn";
Part 1 of KSE-III The ability to schedule multiple threads per process (one one cpu) by making ALL system calls optionally asynchronous. to come: ia64 and power-pc patches, patches for gdb, test program (in tools) Reviewed by: Almost everyone who counts (at various times, peter, jhb, matt, alfred, mini, bernd, and a cast of thousands) NOTE: this is still Beta code, and contains lots of debugging stuff. expect slight instability in signals..
2002-06-29 17:26:22 +00:00
break;
}
Remove the uarea column from the DDB 'ps' display, and from grog's gdb scripts. Reviewed by: arch@
2004-11-20 02:32:42 +00:00
db_printf("%5d %8p %4d %5d %5d %07x %s",
p->p_pid, (volatile void *)p,
db_ps.c: Don't attempt to follow null pointers for zombie processes in db_ps(). Style fix: use explicit an comparison with NULL for all null pointer checks in db_ps() instead of for half of them. db_interface.c: Fixed ddb's handling of traps from with ddb on i386's only. This was mostly fixed in rev.1.27 (by longjmp()'ing back to the top level) but was completly broken in rev.1.48 (by not unwinding the new state (mainly db_active) either before or after the longjmp(). This mostly never worked for other arches, since rev.1.27 has not been ported and lower level longjmp()'s only handle traps for memory accesses. All cases should be handled at a lower level to provided better control and simplify unwinding of state. Implementation details: don't pretend to maintain db_active in a nested way -- ddb cannot be reentered in a nested way. Use db_active instead of the db_global_jmpbuf_valid flag and longjmp()'s return value for things related to reentering ddb. [re]entering is still not atomic enough.
2002-08-31 04:25:44 +00:00
p->p_ucred != NULL ? p->p_ucred->cr_ruid : 0, pp->p_pid,
p->p_pgrp != NULL ? p->p_pgrp->pg_id : 0, p->p_flag,
state);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
if (p->p_flag & P_HADTHREADS)
- Whitespace fixes. - Fix an old bug: p_comm is an array not a pointer, so it can't be NULL.`
2001-09-12 22:32:03 +00:00
db_printf("(threaded) %s\n", p->p_comm);
Completely redo thread states. Reviewed by: davidxu@freebsd.org
2002-09-11 08:13:56 +00:00
FOREACH_THREAD_IN_PROC(p, td) {
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
dumpthread(p, td);
Update the 'ps', 'show pci', and 'show ktr' ddb commands to use the new pager callout instead of homerolling their own paging facility.
2003-07-31 17:29:42 +00:00
if (quit)
break;
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
}
Commented out locking that would be used in the ps command if locks were used in ddb.
2002-04-11 21:01:34 +00:00
/* PROC_UNLOCK(p); */
Use macro API for <sys/queue.h>
2000-12-30 22:06:19 +00:00
p = LIST_NEXT(p, p_list);
Make db_ps tolerant of uninitialized struct proc fields. Improved 'more' function to work like you'd expect. Other misc cleanup.
1995-08-20 05:25:11 +00:00
if (p == NULL && np > 0)
Use macro API for <sys/queue.h>
2000-12-30 22:06:19 +00:00
p = LIST_FIRST(&zombproc);
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
}
Commented out locking that would be used in the ps command if locks were used in ddb.
2002-04-11 21:01:34 +00:00
/* sx_sunlock(&allproc_lock); */
ddb ps function from 1.1.5. Moved into its own file and cleaned up a bit by me.
1994-08-27 16:28:45 +00:00
}
Whitespace nits.
2003-06-06 17:19:27 +00:00
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
static void
dumpthread(volatile struct proc *p, volatile struct thread *td)
{
Whitespace nit.
2003-07-30 20:59:36 +00:00
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
if (p->p_flag & P_HADTHREADS)
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
db_printf( " thread %p ksegrp %p ", td, td->td_ksegrp);
Switch the sleep/wakeup and condition variable implementations to use the sleep queue interface: - Sleep queues attempt to merge some of the benefits of both sleep queues and condition variables. Having sleep qeueus in a hash table avoids having to allocate a queue head for each wait channel. Thus, struct cv has shrunk down to just a single char * pointer now. However, the hash table does not hold threads directly, but queue heads. This means that once you have located a queue in the hash bucket, you no longer have to walk the rest of the hash chain looking for threads. Instead, you have a list of all the threads sleeping on that wait channel. - Outside of the sleepq code and the sleep/cv code the kernel no longer differentiates between cv's and sleep/wakeup. For example, calls to abortsleep() and cv_abort() are replaced with a call to sleepq_abort(). Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and cv_waitq_remove() have been replaced with calls to sleepq_remove(). - The sched_sleep() function no longer accepts a priority argument as sleep's no longer inherently bump the priority. Instead, this is soley a propery of msleep() which explicitly calls sched_prio() before blocking. - The TDF_ONSLEEPQ flag has been dropped as it was never used. The associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been dropped and replaced with a single explicit clearing of td_wchan. TD_SET_ONSLEEPQ() would really have only made sense if it had taken the wait channel and message as arguments anyway. Now that that only happens in one place, a macro would be overkill.
2004-02-27 18:52:44 +00:00
if (TD_ON_SLEEPQ(td))
db_printf("[SLPQ %s %p]", td->td_wmesg, (void *)td->td_wchan);
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
switch (td->td_state) {
case TDS_INHIBITED:
if (TD_ON_LOCK(td)) {
db_printf("[LOCK %6s %8p]",
td->td_lockname,
(void *)td->td_blocked);
}
if (TD_IS_SLEEPING(td)) {
db_printf("[SLP]");
}
if (TD_IS_SWAPPED(td)) {
db_printf("[SWAP]");
}
if (TD_IS_SUSPENDED(td)) {
db_printf("[SUSP]");
}
if (TD_AWAITING_INTR(td)) {
db_printf("[IWAIT]");
}
break;
case TDS_CAN_RUN:
db_printf("[Can run]");
break;
case TDS_RUNQ:
db_printf("[RUNQ]");
break;
case TDS_RUNNING:
Move the _oncpu entry from the KSE to the thread. The entry in the KSE still exists but it's purpose will change a bit when we add the ability to lock a KSE to a cpu.
2003-04-10 17:35:44 +00:00
db_printf("[CPU %d]", td->td_oncpu);
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
break;
Handle the TDS_INACTIVE state by printing '[INACTIVE]' instead of panic'ing. Also, for unknown thread states, print out the value rather than panic. Panic'ing in the debugger is pointless at best.
2003-06-06 17:20:47 +00:00
case TDS_INACTIVE:
db_printf("[INACTIVE]");
break;
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
default:
Handle the TDS_INACTIVE state by printing '[INACTIVE]' instead of panic'ing. Also, for unknown thread states, print out the value rather than panic. Panic'ing in the debugger is pointless at best.
2003-06-06 17:20:47 +00:00
db_printf("[UNK: %#x]", td->td_state);
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
}
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
if (p->p_flag & P_HADTHREADS) {
#ifdef KEF_DIDRUN
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
if (td->td_kse)
db_printf("[kse %p]", td->td_kse);
Refactor a bunch of scheduler code to give basically the same behaviour but with slightly cleaned up interfaces. The KSE structure has become the same as the "per thread scheduler private data" structure. In order to not make the diffs too great one is #defined as the other at this time. The KSE (or td_sched) structure is now allocated per thread and has no allocation code of its own. Concurrency for a KSEGRP is now kept track of via a simple pair of counters rather than using KSE structures as tokens. Since the KSE structure is different in each scheduler, kern_switch.c is now included at the end of each scheduler. Nothing outside the scheduler knows the contents of the KSE (aka td_sched) structure. The fields in the ksegrp structure that are to do with the scheduler's queueing mechanisms are now moved to the kg_sched structure. (per ksegrp scheduler private data structure). In other words how the scheduler queues and keeps track of threads is no-one's business except the scheduler's. This should allow people to write experimental schedulers with completely different internal structuring. A scheduler call sched_set_concurrency(kg, N) has been added that notifies teh scheduler that no more than N threads from that ksegrp should be allowed to be on concurrently scheduled. This is also used to enforce 'fainess' at this time so that a ksegrp with 10000 threads can not swamp a the run queue and force out a process with 1 thread, since the current code will not set the concurrency above NCPU, and both schedulers will not allow more than that many onto the system run queue at a time. Each scheduler should eventualy develop their own methods to do this now that they are effectively separated. Rejig libthr's kernel interface to follow the same code paths as linkse for scope system threads. This has slightly hurt libthr's performance but I will work to recover as much of it as I can. Thread exit code has been cleaned up greatly. exit and exec code now transitions a process back to 'standard non-threaded mode' before taking the next step. Reviewed by: scottl, peter MFC after: 1 week
2004-09-05 02:09:54 +00:00
#endif
Add code to ddb to allow backtracing an arbitrary thread. (show thread {address}) Remove the IDLE kse state and replace it with a change in the way threads sahre KSEs. Every KSE now has a thread, which is considered its "owner" however a KSE may also be lent to other threads in the same group to allow completion of in-kernel work. n this case the owner remains the same and the KSE will revert to the owner when the other work has been completed. All creations of upcalls etc. is now done from kse_reassign() which in turn is called from mi_switch or thread_exit(). This means that special code can be removed from msleep() and cv_wait(). kse_release() does not leave a KSE with no thread any more but converts the existing thread into teh KSE's owner, and sets it up for doing an upcall. It is just inhibitted from being scheduled until there is some reason to do an upcall. Remove all trace of the kse_idle queue since it is no-longer needed. "Idle" KSEs are now on the loanable queue.
2002-12-28 01:23:07 +00:00
db_printf("\n");
} else
db_printf(" %s\n", p->p_comm);
}
Reference in New Issue Copy Permalink