freebsd-dev/sys/netipsec/ipsec.h

372 lines
12 KiB
C
Raw Normal View History

/* $FreeBSD$ */
/* $KAME: ipsec.h,v 1.53 2001/11/20 08:32:38 itojun Exp $ */
/*-
* SPDX-License-Identifier: BSD-3-Clause
*
* Copyright (C) 1995, 1996, 1997, and 1998 WIDE Project.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the project nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE PROJECT AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE PROJECT OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*
* IPsec controller part.
*/
#ifndef _NETIPSEC_IPSEC_H_
#define _NETIPSEC_IPSEC_H_
#if defined(_KERNEL) && !defined(_LKM) && !defined(KLD_MODULE)
#include "opt_inet.h"
#include "opt_ipsec.h"
#endif
#include <net/pfkeyv2.h>
#include <netipsec/keydb.h>
#ifdef _KERNEL
#include <sys/_lock.h>
#include <sys/_mutex.h>
#include <sys/_rwlock.h>
#define IPSEC_ASSERT(_c,_m) KASSERT(_c, _m)
/*
* Security Policy Index
* Ensure that both address families in the "src" and "dst" are same.
* When the value of the ul_proto is ICMPv6, the port field in "src"
* specifies ICMPv6 type, and the port field in "dst" specifies ICMPv6 code.
*/
struct secpolicyindex {
union sockaddr_union src; /* IP src address for SP */
union sockaddr_union dst; /* IP dst address for SP */
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
uint8_t ul_proto; /* upper layer Protocol */
uint8_t dir; /* direction of packet flow */
uint8_t prefs; /* prefix length in bits for src */
uint8_t prefd; /* prefix length in bits for dst */
};
/* Request for IPsec */
struct ipsecrequest {
struct secasindex saidx;/* hint for search proper SA */
/* if __ss_len == 0 then no address specified.*/
u_int level; /* IPsec level defined below. */
};
/* Security Policy Data Base */
struct secpolicy {
TAILQ_ENTRY(secpolicy) chain;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
LIST_ENTRY(secpolicy) idhash;
LIST_ENTRY(secpolicy) drainq;
struct secpolicyindex spidx; /* selector */
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#define IPSEC_MAXREQ 4
struct ipsecrequest *req[IPSEC_MAXREQ];
u_int tcount; /* IPsec transforms count */
volatile u_int refcnt; /* reference count */
u_int policy; /* policy_type per pfkeyv2.h */
u_int state;
#define IPSEC_SPSTATE_DEAD 0
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#define IPSEC_SPSTATE_LARVAL 1
#define IPSEC_SPSTATE_ALIVE 2
#define IPSEC_SPSTATE_PCB 3
#define IPSEC_SPSTATE_IFNET 4
uint32_t priority; /* priority of this policy */
uint32_t id; /* It's unique number on the system. */
/*
* lifetime handler.
* the policy can be used without limitiation if both lifetime and
* validtime are zero.
* "lifetime" is passed by sadb_lifetime.sadb_lifetime_addtime.
* "validtime" is passed by sadb_lifetime.sadb_lifetime_usetime.
*/
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
time_t created; /* time created the policy */
time_t lastused; /* updated every when kernel sends a packet */
long lifetime; /* duration of the lifetime of this policy */
long validtime; /* duration this policy is valid without use */
};
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
/*
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
* PCB security policies.
* Application can setup private security policies for socket.
* Such policies can have IPSEC, BYPASS and ENTRUST type.
* By default, policies are set to NULL. This means that they have ENTRUST type.
* When application sets BYPASS or IPSEC type policy, the flags field
* is also updated. When flags is not set, the system could store
* used security policy into the sp_in/sp_out pointer to speed up further
* lookups.
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
*/
struct inpcbpolicy {
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct secpolicy *sp_in;
struct secpolicy *sp_out;
uint32_t genid;
uint16_t flags;
#define INP_INBOUND_POLICY 0x0001
#define INP_OUTBOUND_POLICY 0x0002
uint16_t hdrsz;
};
/* SP acquiring list table. */
struct secspacq {
LIST_ENTRY(secspacq) chain;
struct secpolicyindex spidx;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
time_t created; /* for lifetime */
int count; /* for lifetime */
/* XXX: here is mbuf place holder to be sent ? */
};
#endif /* _KERNEL */
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
/* buffer size for formatted output of ipsec address */
#define IPSEC_ADDRSTRLEN (INET6_ADDRSTRLEN + 11)
/* according to IANA assignment, port 0x0000 and proto 0xff are reserved. */
#define IPSEC_PORT_ANY 0
#define IPSEC_ULPROTO_ANY 255
#define IPSEC_PROTO_ANY 255
/* mode of security protocol */
/* NOTE: DON'T use IPSEC_MODE_ANY at SPD. It's only use in SAD */
#define IPSEC_MODE_ANY 0 /* i.e. wildcard. */
#define IPSEC_MODE_TRANSPORT 1
#define IPSEC_MODE_TUNNEL 2
Initial import of RFC 2385 (TCP-MD5) digest support. This is the first of two commits; bringing in the kernel support first. This can be enabled by compiling a kernel with options TCP_SIGNATURE and FAST_IPSEC. For the uninitiated, this is a TCP option which provides for a means of authenticating TCP sessions which came into being before IPSEC. It is still relevant today, however, as it is used by many commercial router vendors, particularly with BGP, and as such has become a requirement for interconnect at many major Internet points of presence. Several parts of the TCP and IP headers, including the segment payload, are digested with MD5, including a shared secret. The PF_KEY interface is used to manage the secrets using security associations in the SADB. There is a limitation here in that as there is no way to map a TCP flow per-port back to an SPI without polluting tcpcb or using the SPD; the code to do the latter is unstable at this time. Therefore this code only supports per-host keying granularity. Whilst FAST_IPSEC is mutually exclusive with KAME IPSEC (and thus IPv6), TCP_SIGNATURE applies only to IPv4. For the vast majority of prospective users of this feature, this will not pose any problem. This implementation is output-only; that is, the option is honoured when responding to a host initiating a TCP session, but no effort is made [yet] to authenticate inbound traffic. This is, however, sufficient to interwork with Cisco equipment. Tested with a Cisco 2501 running IOS 12.0(27), and Quagga 0.96.4 with local patches. Patches for tcpdump to validate TCP-MD5 sessions are also available from me upon request. Sponsored by: sentex.net
2004-02-11 04:26:04 +00:00
#define IPSEC_MODE_TCPMD5 3 /* TCP MD5 mode */
/*
* Direction of security policy.
* NOTE: Since INVALID is used just as flag.
* The other are used for loop counter too.
*/
#define IPSEC_DIR_ANY 0
#define IPSEC_DIR_INBOUND 1
#define IPSEC_DIR_OUTBOUND 2
#define IPSEC_DIR_MAX 3
#define IPSEC_DIR_INVALID 4
/* Policy level */
/*
* IPSEC, ENTRUST and BYPASS are allowed for setsockopt() in PCB,
* DISCARD, IPSEC and NONE are allowed for setkey() in SPD.
* DISCARD and NONE are allowed for system default.
*/
#define IPSEC_POLICY_DISCARD 0 /* discarding packet */
#define IPSEC_POLICY_NONE 1 /* through IPsec engine */
#define IPSEC_POLICY_IPSEC 2 /* do IPsec */
#define IPSEC_POLICY_ENTRUST 3 /* consulting SPD if present. */
#define IPSEC_POLICY_BYPASS 4 /* only for privileged socket. */
Introduce the concept of IPsec security policies scope. Currently are defined three scopes: global, ifnet, and pcb. Generic security policies that IKE daemon can add via PF_KEY interface or an administrator creates with setkey(8) utility have GLOBAL scope. Such policies can be applied by the kernel to outgoing packets and checked agains inbound packets after IPsec processing. Security policies created by if_ipsec(4) interfaces have IFNET scope. Such policies are applied to packets that are passed through if_ipsec(4) interface. And security policies created by application using setsockopt() IP_IPSEC_POLICY option have PCB scope. Such policies are applied to packets related to specific socket. Currently there is no way to list PCB policies via setkey(8) utility. Modify setkey(8) and libipsec(3) to be able distinguish the scope of security policies in the `setkey -DP` listing. Add two optional flags: '-t' to list only policies related to virtual *tunneling* interfaces, i.e. policies with IFNET scope, and '-g' to list only policies with GLOBAL scope. By default policies from all scopes are listed. To implement this PF_KEY's sadb_x_policy structure was modified. sadb_x_policy_reserved field is used to pass the policy scope from the kernel to userland. SADB_SPDDUMP message extended to support filtering by scope: sadb_msg_satype field is used to specify bit mask of requested scopes. For IFNET policies the sadb_x_policy_priority field of struct sadb_x_policy is used to pass if_ipsec's interface if_index to the userland. For GLOBAL policies sadb_x_policy_priority is used only to manage order of security policies in the SPDB. For IFNET policies it is not used, so it can be used to keep if_index. After this change the output of `setkey -DP` now looks like: # setkey -DPt 0.0.0.0/0[any] 0.0.0.0/0[any] any in ipsec esp/tunnel/87.250.242.144-87.250.242.145/unique:145 spid=7 seq=3 pid=58025 scope=ifnet ifname=ipsec0 refcnt=1 # setkey -DPg ::/0 ::/0 icmp6 135,0 out none spid=5 seq=1 pid=872 scope=global refcnt=1 No objection from: #network Obtained from: Yandex LLC MFC after: 2 weeks Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9805
2017-03-07 00:13:53 +00:00
/* Policy scope */
#define IPSEC_POLICYSCOPE_ANY 0x00 /* unspecified */
#define IPSEC_POLICYSCOPE_GLOBAL 0x01 /* global scope */
#define IPSEC_POLICYSCOPE_IFNET 0x02 /* if_ipsec(4) scope */
#define IPSEC_POLICYSCOPE_PCB 0x04 /* PCB scope */
/* Security protocol level */
#define IPSEC_LEVEL_DEFAULT 0 /* reference to system default */
#define IPSEC_LEVEL_USE 1 /* use SA if present. */
#define IPSEC_LEVEL_REQUIRE 2 /* require SA. */
#define IPSEC_LEVEL_UNIQUE 3 /* unique SA. */
#define IPSEC_MANUAL_REQID_MAX 0x3fff
/*
* if security policy level == unique, this id
* indicate to a relative SA for use, else is
* zero.
* 1 - 0x3fff are reserved for manual keying.
* 0 are reserved for above reason. Others is
* for kernel use.
* Note that this id doesn't identify SA
* by only itself.
*/
#define IPSEC_REPLAYWSIZE 32
/* statistics for ipsec processing */
struct ipsecstat {
uint64_t ips_in_polvio; /* input: sec policy violation */
uint64_t ips_in_nomem; /* input: no memory available */
uint64_t ips_in_inval; /* input: generic error */
uint64_t ips_out_polvio; /* output: sec policy violation */
uint64_t ips_out_nosa; /* output: SA unavailable */
uint64_t ips_out_nomem; /* output: no memory available */
uint64_t ips_out_noroute; /* output: no route available */
uint64_t ips_out_inval; /* output: generic error */
uint64_t ips_out_bundlesa; /* output: bundled SA processed */
uint64_t ips_spdcache_hits; /* SPD cache hits */
uint64_t ips_spdcache_misses; /* SPD cache misses */
uint64_t ips_clcopied; /* clusters copied during clone */
uint64_t ips_mbinserted; /* mbufs inserted during makespace */
/*
* Temporary statistics for performance analysis.
*/
/* See where ESP/AH/IPCOMP header land in mbuf on input */
uint64_t ips_input_front;
uint64_t ips_input_middle;
uint64_t ips_input_end;
};
/*
* Definitions for IPsec & Key sysctl operations.
*/
#define IPSECCTL_STATS 1 /* stats */
#define IPSECCTL_DEF_POLICY 2
#define IPSECCTL_DEF_ESP_TRANSLEV 3 /* int; ESP transport mode */
#define IPSECCTL_DEF_ESP_NETLEV 4 /* int; ESP tunnel mode */
#define IPSECCTL_DEF_AH_TRANSLEV 5 /* int; AH transport mode */
#define IPSECCTL_DEF_AH_NETLEV 6 /* int; AH tunnel mode */
#if 0 /* obsolete, do not reuse */
#define IPSECCTL_INBOUND_CALL_IKE 7
#endif
#define IPSECCTL_AH_CLEARTOS 8
#define IPSECCTL_AH_OFFSETMASK 9
#define IPSECCTL_DFBIT 10
#define IPSECCTL_ECN 11
#define IPSECCTL_DEBUG 12
#define IPSECCTL_ESP_RANDPAD 13
#ifdef _KERNEL
#include <sys/counter.h>
struct ipsec_ctx_data;
#define IPSEC_INIT_CTX(_ctx, _mp, _inp, _sav, _af, _enc) do { \
(_ctx)->mp = (_mp); \
(_ctx)->inp = (_inp); \
(_ctx)->sav = (_sav); \
(_ctx)->af = (_af); \
(_ctx)->enc = (_enc); \
} while(0)
int ipsec_run_hhooks(struct ipsec_ctx_data *ctx, int direction);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, ipsec_debug);
#define V_ipsec_debug VNET(ipsec_debug)
#ifdef REGRESSION
VNET_DECLARE(int, ipsec_replay);
VNET_DECLARE(int, ipsec_integrity);
#define V_ipsec_replay VNET(ipsec_replay)
#define V_ipsec_integrity VNET(ipsec_integrity)
#endif
VNET_PCPUSTAT_DECLARE(struct ipsecstat, ipsec4stat);
VNET_DECLARE(int, ip4_esp_trans_deflev);
VNET_DECLARE(int, ip4_esp_net_deflev);
VNET_DECLARE(int, ip4_ah_trans_deflev);
VNET_DECLARE(int, ip4_ah_net_deflev);
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
VNET_DECLARE(int, ip4_ipsec_dfbit);
VNET_DECLARE(int, ip4_ipsec_ecn);
VNET_DECLARE(int, crypto_support);
VNET_DECLARE(int, async_crypto);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
VNET_DECLARE(int, natt_cksum_policy);
extern struct timeval ipsec_warn_interval;
#define IPSECSTAT_INC(name) \
VNET_PCPUSTAT_ADD(struct ipsecstat, ipsec4stat, name, 1)
#define V_ip4_esp_trans_deflev VNET(ip4_esp_trans_deflev)
#define V_ip4_esp_net_deflev VNET(ip4_esp_net_deflev)
#define V_ip4_ah_trans_deflev VNET(ip4_ah_trans_deflev)
#define V_ip4_ah_net_deflev VNET(ip4_ah_net_deflev)
#define V_ip4_ipsec_dfbit VNET(ip4_ipsec_dfbit)
#define V_ip4_ipsec_ecn VNET(ip4_ipsec_ecn)
#define V_crypto_support VNET(crypto_support)
#define V_async_crypto VNET(async_crypto)
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
#define V_natt_cksum_policy VNET(natt_cksum_policy)
#define ipseclog(x) do { if (V_ipsec_debug) log x; } while (0)
/* for openbsd compatibility */
#ifdef IPSEC_DEBUG
#define IPSEC_DEBUG_DECLARE(x) x
#define DPRINTF(x) do { if (V_ipsec_debug) printf x; } while (0)
#else
#define IPSEC_DEBUG_DECLARE(x)
#define DPRINTF(x)
#endif
struct inpcb;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct m_tag;
struct secasvar;
struct sockopt;
struct tcphdr;
union sockaddr_union;
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
int ipsec_if_input(struct mbuf *, struct secasvar *, uint32_t);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
struct ipsecrequest *ipsec_newisr(void);
void ipsec_delisr(struct ipsecrequest *);
struct secpolicy *ipsec4_checkpolicy(const struct mbuf *, struct inpcb *,
int *, int);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
u_int ipsec_get_reqlevel(struct secpolicy *, u_int);
void udp_ipsec_adjust_cksum(struct mbuf *, struct secasvar *, int, int);
int udp_ipsec_output(struct mbuf *, struct secasvar *);
int udp_ipsec_input(struct mbuf *, int, int);
int udp_ipsec_pcbctl(struct inpcb *, struct sockopt *);
int ipsec_chkreplay(uint32_t, struct secasvar *);
int ipsec_updatereplay(uint32_t, struct secasvar *);
int ipsec_updateid(struct secasvar *, crypto_session_t *, crypto_session_t *);
Merge projects/ipsec into head/. Small summary ------------- o Almost all IPsec releated code was moved into sys/netipsec. o New kernel modules added: ipsec.ko and tcpmd5.ko. New kernel option IPSEC_SUPPORT added. It enables support for loading and unloading of ipsec.ko and tcpmd5.ko kernel modules. o IPSEC_NAT_T option was removed. Now NAT-T support is enabled by default. The UDP_ENCAP_ESPINUDP_NON_IKE encapsulation type support was removed. Added TCP/UDP checksum handling for inbound packets that were decapsulated by transport mode SAs. setkey(8) modified to show run-time NAT-T configuration of SA. o New network pseudo interface if_ipsec(4) added. For now it is build as part of ipsec.ko module (or with IPSEC kernel). It implements IPsec virtual tunnels to create route-based VPNs. o The network stack now invokes IPsec functions using special methods. The only one header file <netipsec/ipsec_support.h> should be included to declare all the needed things to work with IPsec. o All IPsec protocols handlers (ESP/AH/IPCOMP protosw) were removed. Now these protocols are handled directly via IPsec methods. o TCP_SIGNATURE support was reworked to be more close to RFC. o PF_KEY SADB was reworked: - now all security associations stored in the single SPI namespace, and all SAs MUST have unique SPI. - several hash tables added to speed up lookups in SADB. - SADB now uses rmlock to protect access, and concurrent threads can do SA lookups in the same time. - many PF_KEY message handlers were reworked to reflect changes in SADB. - SADB_UPDATE message was extended to support new PF_KEY headers: SADB_X_EXT_NEW_ADDRESS_SRC and SADB_X_EXT_NEW_ADDRESS_DST. They can be used by IKE daemon to change SA addresses. o ipsecrequest and secpolicy structures were cardinally changed to avoid locking protection for ipsecrequest. Now we support only limited number (4) of bundled SAs, but they are supported for both INET and INET6. o INPCB security policy cache was introduced. Each PCB now caches used security policies to avoid SP lookup for each packet. o For inbound security policies added the mode, when the kernel does check for full history of applied IPsec transforms. o References counting rules for security policies and security associations were changed. The proper SA locking added into xform code. o xform code was also changed. Now it is possible to unregister xforms. tdb_xxx structures were changed and renamed to reflect changes in SADB/SPDB, and changed rules for locking and refcounting. Reviewed by: gnn, wblock Obtained from: Yandex LLC Relnotes: yes Sponsored by: Yandex LLC Differential Revision: https://reviews.freebsd.org/D9352
2017-02-06 08:49:57 +00:00
int ipsec_initialized(void);
void ipsec_setspidx_inpcb(struct inpcb *, struct secpolicyindex *, u_int);
void ipsec4_setsockaddrs(const struct mbuf *, union sockaddr_union *,
union sockaddr_union *);
int ipsec4_in_reject(const struct mbuf *, struct inpcb *);
int ipsec4_input(struct mbuf *, int, int);
int ipsec4_forward(struct mbuf *);
int ipsec4_pcbctl(struct inpcb *, struct sockopt *);
int ipsec4_output(struct mbuf *, struct inpcb *);
int ipsec4_capability(struct mbuf *, u_int);
int ipsec4_common_input_cb(struct mbuf *, struct secasvar *, int, int);
int ipsec4_process_packet(struct mbuf *, struct secpolicy *, struct inpcb *);
int ipsec_process_done(struct mbuf *, struct secpolicy *, struct secasvar *,
u_int);
extern void m_checkalignment(const char* where, struct mbuf *m0,
int off, int len);
extern struct mbuf *m_makespace(struct mbuf *m0, int skip, int hlen, int *off);
extern caddr_t m_pad(struct mbuf *m, int n);
extern int m_striphdr(struct mbuf *m, int skip, int hlen);
#endif /* _KERNEL */
#ifndef _KERNEL
extern caddr_t ipsec_set_policy(char *, int);
extern int ipsec_get_policylen(caddr_t);
extern char *ipsec_dump_policy(caddr_t, char *);
extern const char *ipsec_strerror(void);
#endif /* ! KERNEL */
#endif /* _NETIPSEC_IPSEC_H_ */