freebsd-dev/sys/dev/uart/uart_dev_msm.h

219 lines
7.1 KiB
C
Raw Normal View History

/*-
* Copyright (c) 2014 Ganbold Tsagaankhuu <ganbold@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _UART_DM_H_
#define _UART_DM_H_
#define UART_DM_EXTR_BITS(value, start_pos, end_pos) \
((value << (32 - end_pos)) >> (32 - (end_pos - start_pos)))
/* UART Parity Mode */
enum UART_DM_PARITY_MODE {
UART_DM_NO_PARITY,
UART_DM_ODD_PARITY,
UART_DM_EVEN_PARITY,
UART_DM_SPACE_PARITY
};
/* UART Stop Bit Length */
enum UART_DM_STOP_BIT_LEN {
UART_DM_SBL_9_16,
UART_DM_SBL_1,
UART_DM_SBL_1_9_16,
UART_DM_SBL_2
};
/* UART Bits per Char */
enum UART_DM_BITS_PER_CHAR {
UART_DM_5_BPS,
UART_DM_6_BPS,
UART_DM_7_BPS,
UART_DM_8_BPS
};
/* 8-N-1 Configuration */
#define UART_DM_8_N_1_MODE (UART_DM_NO_PARITY | \
(UART_DM_SBL_1 << 2) | \
(UART_DM_8_BPS << 4))
/* UART_DM Registers */
/* UART Operational Mode Registers (HSUART) */
#define UART_DM_MR1 0x00
#define UART_DM_MR1_AUTO_RFR_LEVEL1_BMSK 0xffffff00
#define UART_DM_MR1_AUTO_RFR_LEVEL0_BMSK 0x3f
#define UART_DM_MR1_CTS_CTL_BMSK 0x40
#define UART_DM_MR1_RX_RDY_CTL_BMSK 0x80
#define UART_DM_MR2 0x04
#define UART_DM_MR2_ERROR_MODE_BMSK 0x40
#define UART_DM_MR2_BITS_PER_CHAR_BMSK 0x30
#define UART_DM_MR2_STOP_BIT_LEN_BMSK 0x0c
#define UART_DM_MR2_PARITY_MODE_BMSK 0x03
#define UART_DM_RXBRK_ZERO_CHAR_OFF (1 << 8)
#define UART_DM_LOOPBACK (1 << 7)
/* UART Clock Selection Register, write only */
#define UART_DM_CSR 0x08
/* UART DM TX FIFO Registers - 4, write only */
#define UART_DM_TF(x) (0x70 + (4 * (x)))
/* UART Command Register, write only */
#define UART_DM_CR 0x10
#define UART_DM_CR_RX_ENABLE (1 << 0)
#define UART_DM_CR_RX_DISABLE (1 << 1)
#define UART_DM_CR_TX_ENABLE (1 << 2)
#define UART_DM_CR_TX_DISABLE (1 << 3)
/* UART_DM_CR channel command bit value (register field is bits 8:4) */
#define UART_DM_RESET_RX 0x10
#define UART_DM_RESET_TX 0x20
#define UART_DM_RESET_ERROR_STATUS 0x30
#define UART_DM_RESET_BREAK_INT 0x40
#define UART_DM_START_BREAK 0x50
#define UART_DM_STOP_BREAK 0x60
#define UART_DM_RESET_CTS 0x70
#define UART_DM_RESET_STALE_INT 0x80
#define UART_DM_RFR_LOW 0xD0
#define UART_DM_RFR_HIGH 0xE0
#define UART_DM_CR_PROTECTION_EN 0x100
#define UART_DM_STALE_EVENT_ENABLE 0x500
#define UART_DM_STALE_EVENT_DISABLE 0x600
#define UART_DM_FORCE_STALE_EVENT 0x400
#define UART_DM_CLEAR_TX_READY 0x300
#define UART_DM_RESET_TX_ERROR 0x800
#define UART_DM_RESET_TX_DONE 0x810
/* UART Interrupt Mask Register */
#define UART_DM_IMR 0x14
/* these can be used for both ISR and IMR registers */
#define UART_DM_TXLEV (1 << 0)
#define UART_DM_RXHUNT (1 << 1)
#define UART_DM_RXBRK_CHNG (1 << 2)
#define UART_DM_RXSTALE (1 << 3)
#define UART_DM_RXLEV (1 << 4)
#define UART_DM_DELTA_CTS (1 << 5)
#define UART_DM_CURRENT_CTS (1 << 6)
#define UART_DM_TX_READY (1 << 7)
#define UART_DM_TX_ERROR (1 << 8)
#define UART_DM_TX_DONE (1 << 9)
#define UART_DM_RXBREAK_START (1 << 10)
#define UART_DM_RXBREAK_END (1 << 11)
#define UART_DM_PAR_FRAME_ERR_IRQ (1 << 12)
#define UART_DM_IMR_ENABLED (UART_DM_TX_READY | \
UART_DM_TXLEV | \
UART_DM_RXLEV | \
UART_DM_RXSTALE)
/* UART Interrupt Programming Register */
#define UART_DM_IPR 0x18
#define UART_DM_STALE_TIMEOUT_LSB 0x0f
#define UART_DM_STALE_TIMEOUT_MSB 0x00
#define UART_DM_IPR_STALE_TIMEOUT_MSB_BMSK 0xffffff80
#define UART_DM_IPR_STALE_LSB_BMSK 0x1f
/* UART Transmit/Receive FIFO Watermark Register */
#define UART_DM_TFWR 0x1c
/* Interrupt is generated when FIFO level is less than or equal to this value */
#define UART_DM_TFW_VALUE 0
#define UART_DM_RFWR 0x20
/* Interrupt generated when no of words in RX FIFO is greater than this value */
#define UART_DM_RFW_VALUE 0
/* UART Hunt Character Register */
#define UART_DM_HCR 0x24
/* Used for RX transfer initialization */
#define UART_DM_DMRX 0x34
/* Default DMRX value - any value bigger than FIFO size would be fine */
#define UART_DM_DMRX_DEF_VALUE 0x220
/* Register to enable IRDA function */
#define UART_DM_IRDA 0x38
/* UART Data Mover Enable Register */
#define UART_DM_DMEN 0x3c
/*
* Single-Character mode for RX channel (every character received
* is zero-padded into a word).
*/
#define UART_DM_DMEN_RX_SC_ENABLE (1 << 5)
/* Number of characters for Transmission */
#define UART_DM_NO_CHARS_FOR_TX 0x40
/* UART RX FIFO Base Address */
#define UART_DM_BADR 0x44
#define UART_DM_SIM_CFG_ADDR 0x80
/* Read only registers */
/* UART Status Register */
#define UART_DM_SR 0x08
/* register field mask mapping */
#define UART_DM_SR_RXRDY (1 << 0)
#define UART_DM_SR_RXFULL (1 << 1)
#define UART_DM_SR_TXRDY (1 << 2)
#define UART_DM_SR_TXEMT (1 << 3)
#define UART_DM_SR_UART_OVERRUN (1 << 4)
#define UART_DM_SR_PAR_FRAME_ERR (1 << 5)
#define UART_DM_RX_BREAK (1 << 6)
#define UART_DM_HUNT_CHAR (1 << 7)
#define UART_DM_RX_BRK_START_LAST (1 << 8)
/* UART Receive FIFO Registers - 4 in numbers */
#define UART_DM_RF(x) (0x70 + (4 * (x)))
/* UART Masked Interrupt Status Register */
#define UART_DM_MISR 0x10
/* UART Interrupt Status Register */
#define UART_DM_ISR 0x14
/* Number of characters received since the end of last RX transfer */
#define UART_DM_RX_TOTAL_SNAP 0x38
/* UART TX FIFO Status Register */
#define UART_DM_TXFS 0x4c
#define UART_DM_TXFS_STATE_LSB(x) UART_DM_EXTR_BITS(x,0,6)
#define UART_DM_TXFS_STATE_MSB(x) UART_DM_EXTR_BITS(x,14,31)
#define UART_DM_TXFS_BUF_STATE(x) UART_DM_EXTR_BITS(x,7,9)
#define UART_DM_TXFS_ASYNC_STATE(x) UART_DM_EXTR_BITS(x,10,13)
/* UART RX FIFO Status Register */
#define UART_DM_RXFS 0x50
#define UART_DM_RXFS_STATE_LSB(x) UART_DM_EXTR_BITS(x,0,6)
#define UART_DM_RXFS_STATE_MSB(x) UART_DM_EXTR_BITS(x,14,31)
#define UART_DM_RXFS_BUF_STATE(x) UART_DM_EXTR_BITS(x,7,9)
#define UART_DM_RXFS_ASYNC_STATE(x) UART_DM_EXTR_BITS(x,10,13)
#endif /* _UART_DM_H_ */