freebsd-dev/usr.bin/netstat/main.c

883 lines
20 KiB
C
Raw Normal View History

/*-
1994-05-27 12:33:43 +00:00
* Copyright (c) 1983, 1988, 1993
* Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
char const copyright[] =
1994-05-27 12:33:43 +00:00
"@(#) Copyright (c) 1983, 1988, 1993\n\
Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#if 0
#ifndef lint
1994-05-27 12:33:43 +00:00
static char sccsid[] = "@(#)main.c 8.4 (Berkeley) 3/1/94";
#endif /* not lint */
#endif
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-27 12:33:43 +00:00
#include <sys/param.h>
#include <sys/file.h>
#include <sys/protosw.h>
#include <sys/socket.h>
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
#include <sys/socketvar.h>
1994-05-27 12:33:43 +00:00
#include <netinet/in.h>
#ifdef NETGRAPH
#include <netgraph/ng_socket.h>
#endif
1994-05-27 12:33:43 +00:00
#include <ctype.h>
#include <err.h>
#include <errno.h>
1994-05-27 12:33:43 +00:00
#include <kvm.h>
#include <limits.h>
#include <netdb.h>
#include <nlist.h>
#include <paths.h>
#include <stdint.h>
1994-05-27 12:33:43 +00:00
#include <stdio.h>
#include <stdlib.h>
#include <stdbool.h>
1994-05-27 12:33:43 +00:00
#include <string.h>
#include <unistd.h>
#include "netstat.h"
#include <libxo/xo.h>
1994-05-27 12:33:43 +00:00
1998-08-08 08:13:04 +00:00
static struct nlist nl[] = {
#define N_RTSTAT 0
{ .n_name = "_rtstat" },
#define N_RTREE 1
{ .n_name = "_rt_tables"},
#define N_MRTSTAT 2
{ .n_name = "_mrtstat" },
#define N_MFCHASHTBL 3
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
{ .n_name = "_mfchashtbl" },
#define N_VIFTABLE 4
{ .n_name = "_viftable" },
#define N_NGSOCKS 5
{ .n_name = "_ngsocklist"},
#define N_IP6STAT 6
{ .n_name = "_ip6stat" },
#define N_ICMP6STAT 7
{ .n_name = "_icmp6stat" },
#define N_IPSECSTAT 8
{ .n_name = "_ipsec4stat" },
#define N_IPSEC6STAT 9
{ .n_name = "_ipsec6stat" },
#define N_PIM6STAT 10
{ .n_name = "_pim6stat" },
#define N_MRT6STAT 11
{ .n_name = "_mrt6stat" },
#define N_MF6CTABLE 12
{ .n_name = "_mf6ctable" },
#define N_MIF6TABLE 13
{ .n_name = "_mif6table" },
#define N_PFKEYSTAT 14
{ .n_name = "_pfkeystat" },
#define N_RTTRASH 15
{ .n_name = "_rttrash" },
#define N_CARPSTAT 16
{ .n_name = "_carpstats" },
#define N_PFSYNCSTAT 17
{ .n_name = "_pfsyncstats" },
#define N_AHSTAT 18
{ .n_name = "_ahstat" },
#define N_ESPSTAT 19
{ .n_name = "_espstat" },
#define N_IPCOMPSTAT 20
{ .n_name = "_ipcompstat" },
#define N_TCPSTAT 21
{ .n_name = "_tcpstat" },
#define N_UDPSTAT 22
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_udpstat" },
#define N_IPSTAT 23
{ .n_name = "_ipstat" },
#define N_ICMPSTAT 24
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_icmpstat" },
#define N_IGMPSTAT 25
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_igmpstat" },
#define N_PIMSTAT 26
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_pimstat" },
#define N_TCBINFO 27
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_tcbinfo" },
#define N_UDBINFO 28
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_udbinfo" },
#define N_DIVCBINFO 29
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_divcbinfo" },
#define N_RIPCBINFO 30
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_ripcbinfo" },
#define N_UNP_COUNT 31
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_unp_count" },
#define N_UNP_GENCNT 32
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_unp_gencnt" },
#define N_UNP_DHEAD 33
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_unp_dhead" },
#define N_UNP_SHEAD 34
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_unp_shead" },
#define N_RIP6STAT 36
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_rip6stat" },
#define N_SCTPSTAT 36
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ .n_name = "_sctpstat" },
#define N_MFCTABLESIZE 37
Introduce a number of changes to the MROUTING code. This is purely a forwarding plane cleanup; no control plane code is involved. Summary: * Split IPv4 and IPv6 MROUTING support. The static compile-time kernel option remains the same, however, the modules may now be built for IPv4 and IPv6 separately as ip_mroute_mod and ip6_mroute_mod. * Clean up the IPv4 multicast forwarding code to use BSD queue and hash table constructs. Don't build our own timer abstractions when ratecheck() and timevalclear() etc will do. * Expose the multicast forwarding cache (MFC) and virtual interface table (VIF) as sysctls, to reduce netstat's dependence on libkvm for this information for running kernels. * bandwidth meters however still require libkvm. * Make the MFC hash table size a boot/load-time tunable ULONG, net.inet.ip.mfchashsize (defaults to 256). * Remove unused members from struct vif and struct mfc. * Kill RSVP support, as no current RSVP implementation uses it. These stubs could be moved to raw_ip.c. * Don't share locks or initialization between IPv4 and IPv6. * Don't use a static struct route_in6 in ip6_mroute.c. The v6 code is still using a cached struct route_in6, this is moved to mif6 for the time being. * More cleanup remains to be merged from ip_mroute.c to ip6_mroute.c. v4 path tested using ports/net/mcast-tools. v6 changes are mostly mechanical locking and *have not* been tested. As these changes partially break some kernel ABIs, they will not be MFCed. There is a lot more work to be done here. Reviewed by: Pavlin Radoslavov
2009-03-19 01:43:03 +00:00
{ .n_name = "_mfctablesize" },
#define N_ARPSTAT 38
{ .n_name = "_arpstat" },
#define N_UNP_SPHEAD 39
{ .n_name = "unp_sphead" },
#define N_SFSTAT 40
{ .n_name = "_sfstat"},
{ .n_name = NULL },
1994-05-27 12:33:43 +00:00
};
struct protox {
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
int pr_index; /* index into nlist of cb head */
int pr_sindex; /* index into nlist of stat block */
1994-05-27 12:33:43 +00:00
u_char pr_wanted; /* 1 if wanted, 0 otherwise */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void (*pr_cblocks)(u_long, const char *, int, int);
2001-06-15 23:35:13 +00:00
/* control blocks printing routine */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void (*pr_stats)(u_long, const char *, int, int);
2001-06-15 23:35:13 +00:00
/* statistics printing routine */
void (*pr_istats)(char *); /* per/if statistics printing routine */
2002-04-28 12:12:49 +00:00
const char *pr_name; /* well-known name */
int pr_usesysctl; /* non-zero if we use sysctl, not kvm */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
int pr_protocol;
1994-05-27 12:33:43 +00:00
} protox[] = {
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ N_TCBINFO, N_TCPSTAT, 1, protopr,
tcp_stats, NULL, "tcp", 1, IPPROTO_TCP },
{ N_UDBINFO, N_UDPSTAT, 1, protopr,
udp_stats, NULL, "udp", 1, IPPROTO_UDP },
2007-06-09 13:44:09 +00:00
#ifdef SCTP
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ -1, N_SCTPSTAT, 1, sctp_protopr,
sctp_stats, NULL, "sctp", 1, IPPROTO_SCTP },
#endif
#ifdef SDP
{ -1, -1, 1, protopr,
NULL, NULL, "sdp", 1, IPPROTO_TCP },
2007-06-09 13:44:09 +00:00
#endif
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ N_DIVCBINFO, -1, 1, protopr,
NULL, NULL, "divert", 1, IPPROTO_DIVERT },
{ N_RIPCBINFO, N_IPSTAT, 1, protopr,
ip_stats, NULL, "ip", 1, IPPROTO_RAW },
{ N_RIPCBINFO, N_ICMPSTAT, 1, protopr,
icmp_stats, NULL, "icmp", 1, IPPROTO_ICMP },
{ N_RIPCBINFO, N_IGMPSTAT, 1, protopr,
igmp_stats, NULL, "igmp", 1, IPPROTO_IGMP },
#ifdef IPSEC
{ -1, N_IPSECSTAT, 1, NULL, /* keep as compat */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
ipsec_stats, NULL, "ipsec", 0, 0},
{ -1, N_AHSTAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
ah_stats, NULL, "ah", 0, 0},
{ -1, N_ESPSTAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
esp_stats, NULL, "esp", 0, 0},
{ -1, N_IPCOMPSTAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
ipcomp_stats, NULL, "ipcomp", 0, 0},
#endif
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ N_RIPCBINFO, N_PIMSTAT, 1, protopr,
pim_stats, NULL, "pim", 1, IPPROTO_PIM },
{ -1, N_CARPSTAT, 1, NULL,
carp_stats, NULL, "carp", 1, 0 },
#ifdef PF
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ -1, N_PFSYNCSTAT, 1, NULL,
pfsync_stats, NULL, "pfsync", 1, 0 },
#endif
{ -1, N_ARPSTAT, 1, NULL,
arp_stats, NULL, "arp", 1, 0 },
{ -1, -1, 0, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, NULL, 0, 0 }
1994-05-27 12:33:43 +00:00
};
#ifdef INET6
struct protox ip6protox[] = {
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ N_TCBINFO, N_TCPSTAT, 1, protopr,
tcp_stats, NULL, "tcp", 1, IPPROTO_TCP },
{ N_UDBINFO, N_UDPSTAT, 1, protopr,
udp_stats, NULL, "udp", 1, IPPROTO_UDP },
{ N_RIPCBINFO, N_IP6STAT, 1, protopr,
ip6_stats, ip6_ifstats, "ip6", 1, IPPROTO_RAW },
{ N_RIPCBINFO, N_ICMP6STAT, 1, protopr,
icmp6_stats, icmp6_ifstats, "icmp6", 1, IPPROTO_ICMPV6 },
#ifdef SDP
{ -1, -1, 1, protopr,
NULL, NULL, "sdp", 1, IPPROTO_TCP },
#endif
#ifdef IPSEC
{ -1, N_IPSEC6STAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
ipsec_stats, NULL, "ipsec6", 0, 0 },
#endif
#ifdef notyet
{ -1, N_PIM6STAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
pim6_stats, NULL, "pim6", 1, 0 },
#endif
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
{ -1, N_RIP6STAT, 1, NULL,
rip6_stats, NULL, "rip6", 1, 0 },
{ -1, -1, 0, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, NULL, 0, 0 }
};
#endif /*INET6*/
2000-07-05 02:02:54 +00:00
#ifdef IPSEC
struct protox pfkeyprotox[] = {
{ -1, N_PFKEYSTAT, 1, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
pfkey_stats, NULL, "pfkey", 0, 0 },
{ -1, -1, 0, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, NULL, 0, 0 }
2000-07-05 02:02:54 +00:00
};
#endif
#ifdef NETGRAPH
struct protox netgraphprotox[] = {
{ N_NGSOCKS, -1, 1, netgraphprotopr,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, "ctrl", 0, 0 },
{ N_NGSOCKS, -1, 1, netgraphprotopr,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, "data", 0, 0 },
{ -1, -1, 0, NULL,
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
NULL, NULL, NULL, 0, 0 }
};
#endif
struct protox *protoprotox[] = {
protox,
#ifdef INET6
ip6protox,
2000-07-05 02:02:54 +00:00
#endif
#ifdef IPSEC
pfkeyprotox,
2005-08-05 18:45:49 +00:00
#endif
NULL };
1994-05-27 12:33:43 +00:00
static void printproto(struct protox *, const char *, bool *);
static void usage(void);
static struct protox *name2protox(const char *);
static struct protox *knownname(const char *);
1994-05-27 12:33:43 +00:00
1998-08-08 08:13:04 +00:00
static kvm_t *kvmd;
static char *nlistf = NULL, *memf = NULL;
int Aflag; /* show addresses of protocol control block */
int aflag; /* show all sockets (including servers) */
int Bflag; /* show information about bpf consumers */
int bflag; /* show i/f total bytes in/out */
int dflag; /* show i/f dropped packets */
int gflag; /* show group (multicast) routing or stats */
int hflag; /* show counters in human readable format */
int iflag; /* show interfaces */
int Lflag; /* show size of listen queues */
int mflag; /* show memory stats */
int noutputs = 0; /* how much outputs before we exit */
int numeric_addr; /* show addresses numerically */
int numeric_port; /* show ports numerically */
static int pflag; /* show given protocol */
int Qflag; /* show netisr information */
int rflag; /* show routing tables (or routing stats) */
int Rflag; /* show flow / RSS statistics */
int sflag; /* show protocol statistics */
int Wflag; /* wide display */
int Tflag; /* TCP Information */
2008-09-01 15:04:38 +00:00
int xflag; /* extra information, includes all socket buffer info */
int zflag; /* zero stats */
int interval; /* repeat interval for i/f stats */
char *interface; /* desired i/f for stats, or NULL for all i/fs */
int unit; /* unit number for above */
int af; /* address family */
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
int live; /* true if we are examining a live system */
1994-05-27 12:33:43 +00:00
int
main(int argc, char *argv[])
1994-05-27 12:33:43 +00:00
{
struct protox *tp = NULL; /* for printing cblocks & stats */
1994-05-27 12:33:43 +00:00
int ch;
int fib = -1;
char *endptr;
bool first = true;
1994-05-27 12:33:43 +00:00
af = AF_UNSPEC;
argc = xo_parse_args(argc, argv);
while ((ch = getopt(argc, argv, "46AaBbdF:f:ghI:iLlM:mN:np:Qq:RrSTsuWw:xz"))
!= -1)
1994-05-27 12:33:43 +00:00
switch(ch) {
case '4':
#ifdef INET
af = AF_INET;
#else
errx(1, "IPv4 support is not compiled in");
#endif
break;
case '6':
#ifdef INET6
af = AF_INET6;
#else
errx(1, "IPv6 support is not compiled in");
#endif
break;
1994-05-27 12:33:43 +00:00
case 'A':
Aflag = 1;
break;
case 'a':
aflag = 1;
break;
case 'B':
Bflag = 1;
break;
case 'b':
bflag = 1;
break;
1994-05-27 12:33:43 +00:00
case 'd':
dflag = 1;
break;
case 'F':
fib = strtol(optarg, &endptr, 0);
if (*endptr != '\0' ||
(fib == 0 && (errno == EINVAL || errno == ERANGE)))
xo_errx(1, "%s: invalid fib", optarg);
break;
1994-05-27 12:33:43 +00:00
case 'f':
if (strcmp(optarg, "inet") == 0)
1994-05-27 12:33:43 +00:00
af = AF_INET;
#ifdef INET6
else if (strcmp(optarg, "inet6") == 0)
af = AF_INET6;
#endif
#ifdef IPSEC
2000-07-05 02:02:54 +00:00
else if (strcmp(optarg, "pfkey") == 0)
af = PF_KEY;
#endif
1994-05-27 12:33:43 +00:00
else if (strcmp(optarg, "unix") == 0)
af = AF_UNIX;
#ifdef NETGRAPH
else if (strcmp(optarg, "ng") == 0
|| strcmp(optarg, "netgraph") == 0)
af = AF_NETGRAPH;
#endif
else if (strcmp(optarg, "link") == 0)
af = AF_LINK;
1994-05-27 12:33:43 +00:00
else {
xo_errx(1, "%s: unknown address family",
optarg);
1994-05-27 12:33:43 +00:00
}
break;
case 'g':
gflag = 1;
break;
case 'h':
hflag = 1;
break;
1994-05-27 12:33:43 +00:00
case 'I': {
char *cp;
iflag = 1;
for (cp = interface = optarg; isalpha(*cp); cp++)
continue;
unit = atoi(cp);
break;
}
case 'i':
iflag = 1;
break;
case 'L':
Lflag = 1;
break;
1994-05-27 12:33:43 +00:00
case 'M':
memf = optarg;
break;
case 'm':
mflag = 1;
break;
case 'N':
nlistf = optarg;
break;
case 'n':
numeric_addr = numeric_port = 1;
1994-05-27 12:33:43 +00:00
break;
case 'p':
if ((tp = name2protox(optarg)) == NULL) {
xo_errx(1, "%s: unknown or uninstrumented "
"protocol", optarg);
1994-05-27 12:33:43 +00:00
}
pflag = 1;
break;
case 'Q':
Qflag = 1;
break;
case 'q':
noutputs = atoi(optarg);
if (noutputs != 0)
noutputs++;
break;
1994-05-27 12:33:43 +00:00
case 'r':
rflag = 1;
break;
case 'R':
Rflag = 1;
break;
1994-05-27 12:33:43 +00:00
case 's':
++sflag;
break;
case 'S':
numeric_addr = 1;
break;
1994-05-27 12:33:43 +00:00
case 'u':
af = AF_UNIX;
break;
case 'W':
case 'l':
Wflag = 1;
break;
1994-05-27 12:33:43 +00:00
case 'w':
interval = atoi(optarg);
iflag = 1;
break;
case 'T':
Tflag = 1;
break;
case 'x':
xflag = 1;
break;
case 'z':
zflag = 1;
break;
1994-05-27 12:33:43 +00:00
case '?':
default:
usage();
}
argv += optind;
argc -= optind;
#define BACKWARD_COMPATIBILITY
#ifdef BACKWARD_COMPATIBILITY
if (*argv) {
if (isdigit(**argv)) {
interval = atoi(*argv);
if (interval <= 0)
usage();
++argv;
iflag = 1;
}
if (*argv) {
nlistf = *argv;
if (*++argv)
memf = *argv;
}
}
#endif
/*
* Discard setgid privileges if not the running kernel so that bad
* guys can't print interesting stuff from kernel memory.
*/
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
live = (nlistf == NULL && memf == NULL);
if (!live)
1994-05-27 12:33:43 +00:00
setgid(getgid());
if (xflag && Tflag)
xo_errx(1, "-x and -T are incompatible, pick one.");
if (Bflag) {
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (!live)
usage();
bpf_stats(interface);
xo_finish();
exit(0);
}
1994-05-27 12:33:43 +00:00
if (mflag) {
if (!live) {
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (kread(0, NULL, 0) == 0)
mbpr(kvmd, nl[N_SFSTAT].n_value);
} else
mbpr(NULL, 0);
xo_finish();
1994-05-27 12:33:43 +00:00
exit(0);
}
if (Qflag) {
if (!live) {
if (kread(0, NULL, 0) == 0)
netisr_stats(kvmd);
} else
netisr_stats(NULL);
xo_finish();
exit(0);
}
#if 0
1994-05-27 12:33:43 +00:00
/*
* Keep file descriptors open to avoid overhead
* of open/close on each call to get* routines.
*/
sethostent(1);
setnetent(1);
#else
/*
* This does not make sense any more with DNS being default over
* the files. Doing a setXXXXent(1) causes a tcp connection to be
* used for the queries, which is slower.
*/
#endif
if (iflag && !sflag) {
xo_open_container("statistics");
intpr(interval, NULL, af);
xo_close_container("statistics");
xo_finish();
1994-05-27 12:33:43 +00:00
exit(0);
}
if (rflag) {
xo_open_container("statistics");
if (sflag) {
rt_stats();
flowtable_stats();
} else
routepr(fib, af);
xo_close_container("statistics");
xo_finish();
1994-05-27 12:33:43 +00:00
exit(0);
}
1994-05-27 12:33:43 +00:00
if (gflag) {
xo_open_container("statistics");
if (sflag) {
if (af == AF_INET || af == AF_UNSPEC)
mrt_stats();
#ifdef INET6
if (af == AF_INET6 || af == AF_UNSPEC)
mrt6_stats();
#endif
} else {
if (af == AF_INET || af == AF_UNSPEC)
mroutepr();
#ifdef INET6
if (af == AF_INET6 || af == AF_UNSPEC)
mroute6pr();
#endif
1994-05-27 12:33:43 +00:00
}
xo_close_container("statistics");
xo_finish();
exit(0);
1994-05-27 12:33:43 +00:00
}
/* Load all necessary kvm symbols */
kresolve_list(nl);
if (tp) {
xo_open_container("statistics");
printproto(tp, tp->pr_name, &first);
if (!first)
xo_close_list("socket");
xo_close_container("statistics");
xo_finish();
exit(0);
}
xo_open_container("statistics");
if (af == AF_INET || af == AF_UNSPEC)
for (tp = protox; tp->pr_name; tp++)
printproto(tp, tp->pr_name, &first);
#ifdef INET6
if (af == AF_INET6 || af == AF_UNSPEC)
for (tp = ip6protox; tp->pr_name; tp++)
printproto(tp, tp->pr_name, &first);
#endif /*INET6*/
2000-07-05 02:02:54 +00:00
#ifdef IPSEC
if (af == PF_KEY || af == AF_UNSPEC)
for (tp = pfkeyprotox; tp->pr_name; tp++)
printproto(tp, tp->pr_name, &first);
2000-07-05 02:02:54 +00:00
#endif /*IPSEC*/
#ifdef NETGRAPH
if (af == AF_NETGRAPH || af == AF_UNSPEC)
for (tp = netgraphprotox; tp->pr_name; tp++)
printproto(tp, tp->pr_name, &first);
#endif /* NETGRAPH */
if ((af == AF_UNIX || af == AF_UNSPEC) && !sflag)
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
unixpr(nl[N_UNP_COUNT].n_value, nl[N_UNP_GENCNT].n_value,
nl[N_UNP_DHEAD].n_value, nl[N_UNP_SHEAD].n_value,
nl[N_UNP_SPHEAD].n_value, &first);
if (!first)
xo_close_list("socket");
xo_close_container("statistics");
xo_finish();
1994-05-27 12:33:43 +00:00
exit(0);
}
/*
* Print out protocol statistics or control blocks (per sflag).
* If the interface was not specifically requested, and the symbol
* is not in the namelist, ignore this one.
*/
static void
printproto(struct protox *tp, const char *name, bool *first)
1994-05-27 12:33:43 +00:00
{
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
void (*pr)(u_long, const char *, int, int);
1994-05-27 12:33:43 +00:00
u_long off;
bool doingdblocks = false;
1994-05-27 12:33:43 +00:00
if (sflag) {
if (iflag) {
if (tp->pr_istats)
intpr(interval, tp->pr_istats, af);
else if (pflag)
xo_message("%s: no per-interface stats routine",
tp->pr_name);
return;
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
} else {
pr = tp->pr_stats;
if (!pr) {
if (pflag)
xo_message("%s: no stats routine",
tp->pr_name);
return;
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (tp->pr_usesysctl && live)
off = 0;
else if (tp->pr_sindex < 0) {
if (pflag)
xo_message("%s: stats routine doesn't "
"work on cores", tp->pr_name);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return;
} else
off = nl[tp->pr_sindex].n_value;
}
1994-05-27 12:33:43 +00:00
} else {
doingdblocks = true;
1994-05-27 12:33:43 +00:00
pr = tp->pr_cblocks;
if (!pr) {
if (pflag)
xo_message("%s: no PCB routine", tp->pr_name);
return;
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (tp->pr_usesysctl && live)
off = 0;
else if (tp->pr_index < 0) {
if (pflag)
xo_message("%s: PCB routine doesn't work on "
"cores", tp->pr_name);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
return;
} else
off = nl[tp->pr_index].n_value;
1994-05-27 12:33:43 +00:00
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (pr != NULL && (off || (live && tp->pr_usesysctl) ||
af != AF_UNSPEC)) {
if (doingdblocks && *first) {
xo_open_list("socket");
*first = false;
}
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
(*pr)(off, name, af, tp->pr_protocol);
}
1994-05-27 12:33:43 +00:00
}
static int
kvmd_init(void)
{
char errbuf[_POSIX2_LINE_MAX];
if (kvmd != NULL)
return (0);
kvmd = kvm_openfiles(nlistf, memf, NULL, O_RDONLY, errbuf);
setgid(getgid());
if (kvmd == NULL) {
xo_warnx("kvm not available: %s", errbuf);
return (-1);
}
return (0);
}
/*
* Resolve symbol list, return 0 on success.
*/
int
kresolve_list(struct nlist *_nl)
{
if ((kvmd == NULL) && (kvmd_init() != 0))
return (-1);
if (_nl[0].n_type != 0)
return (0);
if (kvm_nlist(kvmd, _nl) < 0) {
if (nlistf)
xo_errx(1, "%s: kvm_nlist: %s", nlistf,
kvm_geterr(kvmd));
else
xo_errx(1, "kvm_nlist: %s", kvm_geterr(kvmd));
}
return (0);
}
1994-05-27 12:33:43 +00:00
/*
* Read kernel memory, return 0 on success.
*/
int
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
kread(u_long addr, void *buf, size_t size)
1994-05-27 12:33:43 +00:00
{
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (kvmd_init() < 0)
return (-1);
1998-08-08 08:13:04 +00:00
if (!buf)
return (0);
Restore netstat -M functionality for most statistics on core dumps. In general, when support was added to netstat for fetching data using sysctl, no provision was left for fetching equivalent data from a core dump, and in fact, netstat would _always_ fetch data from the live kernel using sysctl even when -M was specified resulting in the user believing they were getting data from coredumps when they actually weren't. Some specific changes: - Add a global 'live' variable that is true if netstat is running against the live kernel and false if -M has been specified. - Stop abusing the sysctl flag in the protocol tables to hold the protocol number. Instead, the protocol is now its own field in the tables, and it is passed as a separate parameter to the PCB and stat routines rather than overloading the KVM offset parameter. - Don't run PCB or stats functions who don't have a namelist offset if we are being run against a crash dump (!live). - For the inet and unix PCB routines, we generate the same buffer from KVM that the sysctl usually generates complete with the header and trailer. - Don't run bpf stats for !live (before it would just silently always run live). - kread() no longer trashes memory when opening the buffer if there is an error on open and the passed in buffer is smaller than _POSIX2_LINE_MAX. - The multicast routing code doesn't fallback to kvm on live kernels if the sysctl fails. Keeping this made the code rather hairy, and netstat is already tied to the kernel ABI anyway (even when using sysctl's since things like xinpcb contain an inpcb) so any kernels this is run against that have the multicast routing stuff should have the sysctls. - Don't try to dig around in the kernel linker in the netgraph PCB routine for core dumps. Other notes: - sctp's PCB routine only works on live kernels, it looked rather complicated to generate all the same stuff via KVM. Someone can always add it later if desired though. - Fix the ipsec removal bug where N_xxx for IPSEC stats weren't renumbered. - Use sysctlbyname() everywhere rather than hardcoded mib values. MFC after: 1 week Approved by: re (rwatson)
2007-07-16 17:15:55 +00:00
if (kvm_read(kvmd, addr, buf, size) != (ssize_t)size) {
xo_warnx("%s", kvm_geterr(kvmd));
1994-05-27 12:33:43 +00:00
return (-1);
}
return (0);
}
/*
* Read single counter(9).
*/
uint64_t
kread_counter(u_long addr)
{
if (kvmd_init() < 0)
return (-1);
return (kvm_counter_u64_fetch(kvmd, addr));
}
/*
* Read an array of N counters in kernel memory into array of N uint64_t's.
*/
int
kread_counters(u_long addr, void *buf, size_t size)
{
uint64_t *c = buf;
if (kvmd_init() < 0)
return (-1);
if (kread(addr, buf, size) < 0)
return (-1);
while (size != 0) {
*c = kvm_counter_u64_fetch(kvmd, *c);
size -= sizeof(*c);
c++;
}
return (0);
}
const char *
plural(uintmax_t n)
1994-05-27 12:33:43 +00:00
{
return (n != 1 ? "s" : "");
}
const char *
plurales(uintmax_t n)
1994-05-27 12:33:43 +00:00
{
return (n != 1 ? "es" : "");
}
const char *
pluralies(uintmax_t n)
{
return (n != 1 ? "ies" : "y");
}
1994-05-27 12:33:43 +00:00
/*
* Find the protox for the given "well-known" name.
*/
static struct protox *
knownname(const char *name)
1994-05-27 12:33:43 +00:00
{
struct protox **tpp, *tp;
for (tpp = protoprotox; *tpp; tpp++)
for (tp = *tpp; tp->pr_name; tp++)
if (strcmp(tp->pr_name, name) == 0)
return (tp);
return (NULL);
}
/*
* Find the protox corresponding to name.
*/
static struct protox *
name2protox(const char *name)
1994-05-27 12:33:43 +00:00
{
struct protox *tp;
char **alias; /* alias from p->aliases */
struct protoent *p;
/*
* Try to find the name in the list of "well-known" names. If that
* fails, check if name is an alias for an Internet protocol.
*/
if ((tp = knownname(name)) != NULL)
1994-05-27 12:33:43 +00:00
return (tp);
setprotoent(1); /* make protocol lookup cheaper */
while ((p = getprotoent()) != NULL) {
1994-05-27 12:33:43 +00:00
/* assert: name not same as p->name */
for (alias = p->p_aliases; *alias; alias++)
if (strcmp(name, *alias) == 0) {
endprotoent();
return (knownname(p->p_name));
}
}
endprotoent();
return (NULL);
}
static void
2001-06-15 23:35:13 +00:00
usage(void)
1994-05-27 12:33:43 +00:00
{
(void)xo_error("%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n",
"usage: netstat [-46AaLnRSTWx] [-f protocol_family | -p protocol]\n"
2001-09-11 15:21:36 +00:00
" [-M core] [-N system]",
" netstat -i | -I interface [-46abdhnW] [-f address_family]\n"
" [-M core] [-N system]",
" netstat -w wait [-I interface] [-46d] [-M core] [-N system]\n"
" [-q howmany]",
" netstat -s [-46sz] [-f protocol_family | -p protocol]\n"
2001-09-11 15:21:36 +00:00
" [-M core] [-N system]",
" netstat -i | -I interface -s [-46s]\n"
" [-f protocol_family | -p protocol] [-M core] [-N system]",
" netstat -m [-M core] [-N system]",
" netstat -B [-z] [-I interface]",
" netstat -r [-46AnW] [-F fibnum] [-f address_family]\n"
" [-M core] [-N system]",
2001-09-11 15:21:36 +00:00
" netstat -rs [-s] [-M core] [-N system]",
" netstat -g [-46W] [-f address_family] [-M core] [-N system]",
" netstat -gs [-46s] [-f address_family] [-M core] [-N system]",
" netstat -Q");
xo_finish();
1994-05-27 12:33:43 +00:00
exit(1);
}