freebsd-dev/stand/libsa/zfs/zfsimpl.c

3798 lines
86 KiB
C
Raw Normal View History

Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*-
* Copyright (c) 2007 Doug Rabson
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* Stand-alone ZFS file reader.
*/
#include <stdbool.h>
2019-05-30 02:23:57 +00:00
#include <sys/endian.h>
#include <sys/stat.h>
#include <sys/stdint.h>
#include <sys/list.h>
#include <sys/zfs_bootenv.h>
#include <machine/_inttypes.h>
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#include "zfsimpl.h"
#include "zfssubr.c"
#ifdef HAS_ZSTD_ZFS
extern int zstd_init(void);
#endif
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
struct zfsmount {
const spa_t *spa;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
objset_phys_t objset;
uint64_t rootobj;
};
static struct zfsmount zfsmount __unused;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
/*
* The indirect_child_t represents the vdev that we will read from, when we
* need to read all copies of the data (e.g. for scrub or reconstruction).
* For plain (non-mirror) top-level vdevs (i.e. is_vdev is not a mirror),
* ic_vdev is the same as is_vdev. However, for mirror top-level vdevs,
* ic_vdev is a child of the mirror.
*/
typedef struct indirect_child {
void *ic_data;
vdev_t *ic_vdev;
} indirect_child_t;
/*
* The indirect_split_t represents one mapped segment of an i/o to the
* indirect vdev. For non-split (contiguously-mapped) blocks, there will be
* only one indirect_split_t, with is_split_offset==0 and is_size==io_size.
* For split blocks, there will be several of these.
*/
typedef struct indirect_split {
list_node_t is_node; /* link on iv_splits */
/*
* is_split_offset is the offset into the i/o.
* This is the sum of the previous splits' is_size's.
*/
uint64_t is_split_offset;
vdev_t *is_vdev; /* top-level vdev */
uint64_t is_target_offset; /* offset on is_vdev */
uint64_t is_size;
int is_children; /* number of entries in is_child[] */
/*
* is_good_child is the child that we are currently using to
* attempt reconstruction.
*/
int is_good_child;
indirect_child_t is_child[1]; /* variable-length */
} indirect_split_t;
/*
* The indirect_vsd_t is associated with each i/o to the indirect vdev.
* It is the "Vdev-Specific Data" in the zio_t's io_vsd.
*/
typedef struct indirect_vsd {
boolean_t iv_split_block;
boolean_t iv_reconstruct;
list_t iv_splits; /* list of indirect_split_t's */
} indirect_vsd_t;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* List of all vdevs, chained through v_alllink.
*/
static vdev_list_t zfs_vdevs;
/*
* List of ZFS features supported for read
*/
static const char *features_for_read[] = {
"org.illumos:lz4_compress",
"com.delphix:hole_birth",
"com.delphix:extensible_dataset",
"com.delphix:embedded_data",
"org.open-zfs:large_blocks",
"org.illumos:sha512",
"org.illumos:skein",
"org.zfsonlinux:large_dnode",
"com.joyent:multi_vdev_crash_dump",
"com.delphix:spacemap_histogram",
"com.delphix:zpool_checkpoint",
"com.delphix:spacemap_v2",
"com.datto:encryption",
"com.datto:bookmark_v2",
"org.zfsonlinux:allocation_classes",
"com.datto:resilver_defer",
"com.delphix:device_removal",
"com.delphix:obsolete_counts",
MFV r354382,r354385: 10601 10757 Pool allocation classes illumos/illumos-gate@663207adb1669640c01c5ec6949ce78fd806efae https://github.com/illumos/illumos-gate/commit/663207adb1669640c01c5ec6949ce78fd806efae 10601 Pool allocation classes https://www.illumos.org/issues/10601 illumos port of ZoL Pool allocation classes. Includes at least these two commits: 441709695 Pool allocation classes misplacing small file blocks cc99f275a Pool allocation classes 10757 Add -gLp to zpool subcommands for alt vdev names https://www.illumos.org/issues/10757 Port from ZoL of d2f3e292d Add -gLp to zpool subcommands for alt vdev names Note that a subsequent ZoL commit changed -p to -P a77f29f93 Change full path subcommand flag from -p to -P Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com> Portions contributed by: Håkan Johansson <f96hajo@chalmers.se> Portions contributed by: Richard Yao <ryao@gentoo.org> Portions contributed by: Chunwei Chen <david.chen@nutanix.com> Portions contributed by: loli10K <ezomori.nozomu@gmail.com> Author: Don Brady <don.brady@delphix.com> 11541 allocation_classes feature must be enabled to add log device illumos/illumos-gate@c1064fd7ce62fe763a4475e9988ffea3b22137de https://github.com/illumos/illumos-gate/commit/c1064fd7ce62fe763a4475e9988ffea3b22137de https://www.illumos.org/issues/11541 After the allocation_classes feature was integrated, one can no longer add a log device to a pool unless that feature is enabled. There is an explicit check for this, but it is unnecessary in the case of log devices, so we should handle this better instead of forcing the feature to be enabled. Author: Jerry Jelinek <jerry.jelinek@joyent.com> FreeBSD notes. I faithfully added the new -g, -L, -P flags, but only -g does something: vdev GUIDs are displayed instead of device names. -L, resolve symlinks, and -P, display full disk paths, do nothing at the moment. The use of special vdevs is backward compatible for read-only access, so root pools should be bootable, but exercise caution. MFC after: 4 weeks
2019-11-21 08:20:05 +00:00
"com.intel:allocation_classes",
"org.freebsd:zstd_compress",
"com.delphix:bookmark_written",
NULL
};
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* List of all pools, chained through spa_link.
*/
static spa_list_t zfs_pools;
static const dnode_phys_t *dnode_cache_obj;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static uint64_t dnode_cache_bn;
static char *dnode_cache_buf;
static int zio_read(const spa_t *spa, const blkptr_t *bp, void *buf);
static int zfs_get_root(const spa_t *spa, uint64_t *objid);
static int zfs_rlookup(const spa_t *spa, uint64_t objnum, char *result);
static int zap_lookup(const spa_t *spa, const dnode_phys_t *dnode,
const char *name, uint64_t integer_size, uint64_t num_integers,
void *value);
static int objset_get_dnode(const spa_t *, const objset_phys_t *, uint64_t,
dnode_phys_t *);
static int dnode_read(const spa_t *, const dnode_phys_t *, off_t, void *,
size_t);
static int vdev_indirect_read(vdev_t *, const blkptr_t *, void *, off_t,
size_t);
static int vdev_mirror_read(vdev_t *, const blkptr_t *, void *, off_t, size_t);
vdev_indirect_mapping_t *vdev_indirect_mapping_open(spa_t *, objset_phys_t *,
uint64_t);
vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_duplicate_adjacent_entries(vdev_t *, uint64_t,
uint64_t, uint64_t *);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static void
zfs_init(void)
{
STAILQ_INIT(&zfs_vdevs);
STAILQ_INIT(&zfs_pools);
dnode_cache_buf = malloc(SPA_MAXBLOCKSIZE);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfs_init_crc();
#ifdef HAS_ZSTD_ZFS
zstd_init();
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
nvlist_check_features_for_read(nvlist_t *nvl)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
nvlist_t *features = NULL;
nvs_data_t *data;
nvp_header_t *nvp;
nv_string_t *nvp_name;
int rc;
rc = nvlist_find(nvl, ZPOOL_CONFIG_FEATURES_FOR_READ,
DATA_TYPE_NVLIST, NULL, &features, NULL);
switch (rc) {
case 0:
break; /* Continue with checks */
case ENOENT:
return (0); /* All features are disabled */
default:
return (rc); /* Error while reading nvlist */
}
data = (nvs_data_t *)features->nv_data;
nvp = &data->nvl_pair; /* first pair in nvlist */
while (nvp->encoded_size != 0 && nvp->decoded_size != 0) {
int i, found;
nvp_name = (nv_string_t *)((uintptr_t)nvp + sizeof(*nvp));
found = 0;
for (i = 0; features_for_read[i] != NULL; i++) {
if (memcmp(nvp_name->nv_data, features_for_read[i],
nvp_name->nv_size) == 0) {
found = 1;
break;
}
}
if (!found) {
printf("ZFS: unsupported feature: %.*s\n",
nvp_name->nv_size, nvp_name->nv_data);
rc = EIO;
}
nvp = (nvp_header_t *)((uint8_t *)nvp + nvp->encoded_size);
}
nvlist_destroy(features);
return (rc);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
vdev_read_phys(vdev_t *vdev, const blkptr_t *bp, void *buf,
off_t offset, size_t size)
{
size_t psize;
int rc;
if (vdev->v_phys_read == NULL)
return (ENOTSUP);
if (bp) {
psize = BP_GET_PSIZE(bp);
} else {
psize = size;
}
rc = vdev->v_phys_read(vdev, vdev->v_priv, offset, buf, psize);
if (rc == 0) {
if (bp != NULL)
rc = zio_checksum_verify(vdev->v_spa, bp, buf);
}
return (rc);
}
static int
vdev_write_phys(vdev_t *vdev, void *buf, off_t offset, size_t size)
{
if (vdev->v_phys_write == NULL)
return (ENOTSUP);
return (vdev->v_phys_write(vdev, offset, buf, size));
}
typedef struct remap_segment {
vdev_t *rs_vd;
uint64_t rs_offset;
uint64_t rs_asize;
uint64_t rs_split_offset;
list_node_t rs_node;
} remap_segment_t;
static remap_segment_t *
rs_alloc(vdev_t *vd, uint64_t offset, uint64_t asize, uint64_t split_offset)
{
remap_segment_t *rs = malloc(sizeof (remap_segment_t));
if (rs != NULL) {
rs->rs_vd = vd;
rs->rs_offset = offset;
rs->rs_asize = asize;
rs->rs_split_offset = split_offset;
}
return (rs);
}
vdev_indirect_mapping_t *
vdev_indirect_mapping_open(spa_t *spa, objset_phys_t *os,
uint64_t mapping_object)
{
vdev_indirect_mapping_t *vim;
vdev_indirect_mapping_phys_t *vim_phys;
int rc;
vim = calloc(1, sizeof (*vim));
if (vim == NULL)
return (NULL);
vim->vim_dn = calloc(1, sizeof (*vim->vim_dn));
if (vim->vim_dn == NULL) {
free(vim);
return (NULL);
}
rc = objset_get_dnode(spa, os, mapping_object, vim->vim_dn);
if (rc != 0) {
free(vim->vim_dn);
free(vim);
return (NULL);
}
vim->vim_spa = spa;
vim->vim_phys = malloc(sizeof (*vim->vim_phys));
if (vim->vim_phys == NULL) {
free(vim->vim_dn);
free(vim);
return (NULL);
}
vim_phys = (vdev_indirect_mapping_phys_t *)DN_BONUS(vim->vim_dn);
*vim->vim_phys = *vim_phys;
vim->vim_objset = os;
vim->vim_object = mapping_object;
vim->vim_entries = NULL;
vim->vim_havecounts =
(vim->vim_dn->dn_bonuslen > VDEV_INDIRECT_MAPPING_SIZE_V0);
return (vim);
}
/*
* Compare an offset with an indirect mapping entry; there are three
* possible scenarios:
*
* 1. The offset is "less than" the mapping entry; meaning the
* offset is less than the source offset of the mapping entry. In
* this case, there is no overlap between the offset and the
* mapping entry and -1 will be returned.
*
* 2. The offset is "greater than" the mapping entry; meaning the
* offset is greater than the mapping entry's source offset plus
* the entry's size. In this case, there is no overlap between
* the offset and the mapping entry and 1 will be returned.
*
* NOTE: If the offset is actually equal to the entry's offset
* plus size, this is considered to be "greater" than the entry,
* and this case applies (i.e. 1 will be returned). Thus, the
* entry's "range" can be considered to be inclusive at its
* start, but exclusive at its end: e.g. [src, src + size).
*
* 3. The last case to consider is if the offset actually falls
* within the mapping entry's range. If this is the case, the
* offset is considered to be "equal to" the mapping entry and
* 0 will be returned.
*
* NOTE: If the offset is equal to the entry's source offset,
* this case applies and 0 will be returned. If the offset is
* equal to the entry's source plus its size, this case does
* *not* apply (see "NOTE" above for scenario 2), and 1 will be
* returned.
*/
static int
dva_mapping_overlap_compare(const void *v_key, const void *v_array_elem)
{
const uint64_t *key = v_key;
const vdev_indirect_mapping_entry_phys_t *array_elem =
v_array_elem;
uint64_t src_offset = DVA_MAPPING_GET_SRC_OFFSET(array_elem);
if (*key < src_offset) {
return (-1);
} else if (*key < src_offset + DVA_GET_ASIZE(&array_elem->vimep_dst)) {
return (0);
} else {
return (1);
}
}
/*
* Return array entry.
*/
static vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_entry(vdev_indirect_mapping_t *vim, uint64_t index)
{
uint64_t size;
off_t offset = 0;
int rc;
if (vim->vim_phys->vimp_num_entries == 0)
return (NULL);
if (vim->vim_entries == NULL) {
uint64_t bsize;
bsize = vim->vim_dn->dn_datablkszsec << SPA_MINBLOCKSHIFT;
size = vim->vim_phys->vimp_num_entries *
sizeof (*vim->vim_entries);
if (size > bsize) {
size = bsize / sizeof (*vim->vim_entries);
size *= sizeof (*vim->vim_entries);
}
vim->vim_entries = malloc(size);
if (vim->vim_entries == NULL)
return (NULL);
vim->vim_num_entries = size / sizeof (*vim->vim_entries);
offset = index * sizeof (*vim->vim_entries);
}
/* We have data in vim_entries */
if (offset == 0) {
if (index >= vim->vim_entry_offset &&
index <= vim->vim_entry_offset + vim->vim_num_entries) {
index -= vim->vim_entry_offset;
return (&vim->vim_entries[index]);
}
offset = index * sizeof (*vim->vim_entries);
}
vim->vim_entry_offset = index;
size = vim->vim_num_entries * sizeof (*vim->vim_entries);
rc = dnode_read(vim->vim_spa, vim->vim_dn, offset, vim->vim_entries,
size);
if (rc != 0) {
/* Read error, invalidate vim_entries. */
free(vim->vim_entries);
vim->vim_entries = NULL;
return (NULL);
}
index -= vim->vim_entry_offset;
return (&vim->vim_entries[index]);
}
/*
* Returns the mapping entry for the given offset.
*
* It's possible that the given offset will not be in the mapping table
* (i.e. no mapping entries contain this offset), in which case, the
* return value value depends on the "next_if_missing" parameter.
*
* If the offset is not found in the table and "next_if_missing" is
* B_FALSE, then NULL will always be returned. The behavior is intended
* to allow consumers to get the entry corresponding to the offset
* parameter, iff the offset overlaps with an entry in the table.
*
* If the offset is not found in the table and "next_if_missing" is
* B_TRUE, then the entry nearest to the given offset will be returned,
* such that the entry's source offset is greater than the offset
* passed in (i.e. the "next" mapping entry in the table is returned, if
* the offset is missing from the table). If there are no entries whose
* source offset is greater than the passed in offset, NULL is returned.
*/
static vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_entry_for_offset(vdev_indirect_mapping_t *vim,
uint64_t offset)
{
ASSERT(vim->vim_phys->vimp_num_entries > 0);
vdev_indirect_mapping_entry_phys_t *entry;
uint64_t last = vim->vim_phys->vimp_num_entries - 1;
uint64_t base = 0;
/*
* We don't define these inside of the while loop because we use
* their value in the case that offset isn't in the mapping.
*/
uint64_t mid;
int result;
while (last >= base) {
mid = base + ((last - base) >> 1);
entry = vdev_indirect_mapping_entry(vim, mid);
if (entry == NULL)
break;
result = dva_mapping_overlap_compare(&offset, entry);
if (result == 0) {
break;
} else if (result < 0) {
last = mid - 1;
} else {
base = mid + 1;
}
}
return (entry);
}
/*
* Given an indirect vdev and an extent on that vdev, it duplicates the
* physical entries of the indirect mapping that correspond to the extent
* to a new array and returns a pointer to it. In addition, copied_entries
* is populated with the number of mapping entries that were duplicated.
*
* Finally, since we are doing an allocation, it is up to the caller to
* free the array allocated in this function.
*/
vdev_indirect_mapping_entry_phys_t *
vdev_indirect_mapping_duplicate_adjacent_entries(vdev_t *vd, uint64_t offset,
uint64_t asize, uint64_t *copied_entries)
{
vdev_indirect_mapping_entry_phys_t *duplicate_mappings = NULL;
vdev_indirect_mapping_t *vim = vd->v_mapping;
uint64_t entries = 0;
vdev_indirect_mapping_entry_phys_t *first_mapping =
vdev_indirect_mapping_entry_for_offset(vim, offset);
ASSERT3P(first_mapping, !=, NULL);
vdev_indirect_mapping_entry_phys_t *m = first_mapping;
while (asize > 0) {
uint64_t size = DVA_GET_ASIZE(&m->vimep_dst);
uint64_t inner_offset = offset - DVA_MAPPING_GET_SRC_OFFSET(m);
uint64_t inner_size = MIN(asize, size - inner_offset);
offset += inner_size;
asize -= inner_size;
entries++;
m++;
}
size_t copy_length = entries * sizeof (*first_mapping);
duplicate_mappings = malloc(copy_length);
if (duplicate_mappings != NULL)
bcopy(first_mapping, duplicate_mappings, copy_length);
else
entries = 0;
*copied_entries = entries;
return (duplicate_mappings);
}
static vdev_t *
vdev_lookup_top(spa_t *spa, uint64_t vdev)
{
vdev_t *rvd;
vdev_list_t *vlist;
vlist = &spa->spa_root_vdev->v_children;
STAILQ_FOREACH(rvd, vlist, v_childlink)
if (rvd->v_id == vdev)
break;
return (rvd);
}
/*
* This is a callback for vdev_indirect_remap() which allocates an
* indirect_split_t for each split segment and adds it to iv_splits.
*/
static void
vdev_indirect_gather_splits(uint64_t split_offset, vdev_t *vd, uint64_t offset,
uint64_t size, void *arg)
{
int n = 1;
zio_t *zio = arg;
indirect_vsd_t *iv = zio->io_vsd;
if (vd->v_read == vdev_indirect_read)
return;
if (vd->v_read == vdev_mirror_read)
n = vd->v_nchildren;
indirect_split_t *is =
malloc(offsetof(indirect_split_t, is_child[n]));
if (is == NULL) {
zio->io_error = ENOMEM;
return;
}
bzero(is, offsetof(indirect_split_t, is_child[n]));
is->is_children = n;
is->is_size = size;
is->is_split_offset = split_offset;
is->is_target_offset = offset;
is->is_vdev = vd;
/*
* Note that we only consider multiple copies of the data for
* *mirror* vdevs. We don't for "replacing" or "spare" vdevs, even
* though they use the same ops as mirror, because there's only one
* "good" copy under the replacing/spare.
*/
if (vd->v_read == vdev_mirror_read) {
int i = 0;
vdev_t *kid;
STAILQ_FOREACH(kid, &vd->v_children, v_childlink) {
is->is_child[i++].ic_vdev = kid;
}
} else {
is->is_child[0].ic_vdev = vd;
}
list_insert_tail(&iv->iv_splits, is);
}
static void
vdev_indirect_remap(vdev_t *vd, uint64_t offset, uint64_t asize, void *arg)
{
list_t stack;
spa_t *spa = vd->v_spa;
zio_t *zio = arg;
remap_segment_t *rs;
list_create(&stack, sizeof (remap_segment_t),
offsetof(remap_segment_t, rs_node));
rs = rs_alloc(vd, offset, asize, 0);
if (rs == NULL) {
printf("vdev_indirect_remap: out of memory.\n");
zio->io_error = ENOMEM;
}
for (; rs != NULL; rs = list_remove_head(&stack)) {
vdev_t *v = rs->rs_vd;
uint64_t num_entries = 0;
/* vdev_indirect_mapping_t *vim = v->v_mapping; */
vdev_indirect_mapping_entry_phys_t *mapping =
vdev_indirect_mapping_duplicate_adjacent_entries(v,
rs->rs_offset, rs->rs_asize, &num_entries);
if (num_entries == 0)
zio->io_error = ENOMEM;
for (uint64_t i = 0; i < num_entries; i++) {
vdev_indirect_mapping_entry_phys_t *m = &mapping[i];
uint64_t size = DVA_GET_ASIZE(&m->vimep_dst);
uint64_t dst_offset = DVA_GET_OFFSET(&m->vimep_dst);
uint64_t dst_vdev = DVA_GET_VDEV(&m->vimep_dst);
uint64_t inner_offset = rs->rs_offset -
DVA_MAPPING_GET_SRC_OFFSET(m);
uint64_t inner_size =
MIN(rs->rs_asize, size - inner_offset);
vdev_t *dst_v = vdev_lookup_top(spa, dst_vdev);
if (dst_v->v_read == vdev_indirect_read) {
remap_segment_t *o;
o = rs_alloc(dst_v, dst_offset + inner_offset,
inner_size, rs->rs_split_offset);
if (o == NULL) {
printf("vdev_indirect_remap: "
"out of memory.\n");
zio->io_error = ENOMEM;
break;
}
list_insert_head(&stack, o);
}
vdev_indirect_gather_splits(rs->rs_split_offset, dst_v,
dst_offset + inner_offset,
inner_size, arg);
/*
* vdev_indirect_gather_splits can have memory
* allocation error, we can not recover from it.
*/
if (zio->io_error != 0)
break;
rs->rs_offset += inner_size;
rs->rs_asize -= inner_size;
rs->rs_split_offset += inner_size;
}
free(mapping);
free(rs);
if (zio->io_error != 0)
break;
}
list_destroy(&stack);
}
static void
vdev_indirect_map_free(zio_t *zio)
{
indirect_vsd_t *iv = zio->io_vsd;
indirect_split_t *is;
while ((is = list_head(&iv->iv_splits)) != NULL) {
for (int c = 0; c < is->is_children; c++) {
indirect_child_t *ic = &is->is_child[c];
free(ic->ic_data);
}
list_remove(&iv->iv_splits, is);
free(is);
}
free(iv);
}
static int
vdev_indirect_read(vdev_t *vdev, const blkptr_t *bp, void *buf,
off_t offset, size_t bytes)
{
zio_t zio;
spa_t *spa = vdev->v_spa;
indirect_vsd_t *iv;
indirect_split_t *first;
int rc = EIO;
iv = calloc(1, sizeof(*iv));
if (iv == NULL)
return (ENOMEM);
list_create(&iv->iv_splits,
sizeof (indirect_split_t), offsetof(indirect_split_t, is_node));
bzero(&zio, sizeof(zio));
zio.io_spa = spa;
zio.io_bp = (blkptr_t *)bp;
zio.io_data = buf;
zio.io_size = bytes;
zio.io_offset = offset;
zio.io_vd = vdev;
zio.io_vsd = iv;
if (vdev->v_mapping == NULL) {
vdev_indirect_config_t *vic;
vic = &vdev->vdev_indirect_config;
vdev->v_mapping = vdev_indirect_mapping_open(spa,
spa->spa_mos, vic->vic_mapping_object);
}
vdev_indirect_remap(vdev, offset, bytes, &zio);
if (zio.io_error != 0)
return (zio.io_error);
first = list_head(&iv->iv_splits);
if (first->is_size == zio.io_size) {
/*
* This is not a split block; we are pointing to the entire
* data, which will checksum the same as the original data.
* Pass the BP down so that the child i/o can verify the
* checksum, and try a different location if available
* (e.g. on a mirror).
*
* While this special case could be handled the same as the
* general (split block) case, doing it this way ensures
* that the vast majority of blocks on indirect vdevs
* (which are not split) are handled identically to blocks
* on non-indirect vdevs. This allows us to be less strict
* about performance in the general (but rare) case.
*/
rc = first->is_vdev->v_read(first->is_vdev, zio.io_bp,
zio.io_data, first->is_target_offset, bytes);
} else {
iv->iv_split_block = B_TRUE;
/*
* Read one copy of each split segment, from the
* top-level vdev. Since we don't know the
* checksum of each split individually, the child
* zio can't ensure that we get the right data.
* E.g. if it's a mirror, it will just read from a
* random (healthy) leaf vdev. We have to verify
* the checksum in vdev_indirect_io_done().
*/
for (indirect_split_t *is = list_head(&iv->iv_splits);
is != NULL; is = list_next(&iv->iv_splits, is)) {
char *ptr = zio.io_data;
rc = is->is_vdev->v_read(is->is_vdev, zio.io_bp,
ptr + is->is_split_offset, is->is_target_offset,
is->is_size);
}
if (zio_checksum_verify(spa, zio.io_bp, zio.io_data))
rc = ECKSUM;
else
rc = 0;
}
vdev_indirect_map_free(&zio);
if (rc == 0)
rc = zio.io_error;
return (rc);
}
static int
vdev_disk_read(vdev_t *vdev, const blkptr_t *bp, void *buf,
off_t offset, size_t bytes)
{
return (vdev_read_phys(vdev, bp, buf,
offset + VDEV_LABEL_START_SIZE, bytes));
}
static int
vdev_missing_read(vdev_t *vdev __unused, const blkptr_t *bp __unused,
void *buf __unused, off_t offset __unused, size_t bytes __unused)
{
return (ENOTSUP);
}
static int
vdev_mirror_read(vdev_t *vdev, const blkptr_t *bp, void *buf,
off_t offset, size_t bytes)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
vdev_t *kid;
int rc;
rc = EIO;
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
if (kid->v_state != VDEV_STATE_HEALTHY)
continue;
rc = kid->v_read(kid, bp, buf, offset, bytes);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (!rc)
return (0);
}
return (rc);
}
static int
vdev_replacing_read(vdev_t *vdev, const blkptr_t *bp, void *buf,
off_t offset, size_t bytes)
{
vdev_t *kid;
/*
* Here we should have two kids:
* First one which is the one we are replacing and we can trust
* only this one to have valid data, but it might not be present.
* Second one is that one we are replacing with. It is most likely
* healthy, but we can't trust it has needed data, so we won't use it.
*/
kid = STAILQ_FIRST(&vdev->v_children);
if (kid == NULL)
return (EIO);
if (kid->v_state != VDEV_STATE_HEALTHY)
return (EIO);
return (kid->v_read(kid, bp, buf, offset, bytes));
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static vdev_t *
vdev_find(uint64_t guid)
{
vdev_t *vdev;
STAILQ_FOREACH(vdev, &zfs_vdevs, v_alllink)
if (vdev->v_guid == guid)
return (vdev);
return (0);
}
static vdev_t *
vdev_create(uint64_t guid, vdev_read_t *_read)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
vdev_t *vdev;
vdev_indirect_config_t *vic;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
vdev = calloc(1, sizeof(vdev_t));
if (vdev != NULL) {
STAILQ_INIT(&vdev->v_children);
vdev->v_guid = guid;
vdev->v_read = _read;
/*
* root vdev has no read function, we use this fact to
* skip setting up data we do not need for root vdev.
* We only point root vdev from spa.
*/
if (_read != NULL) {
vic = &vdev->vdev_indirect_config;
vic->vic_prev_indirect_vdev = UINT64_MAX;
STAILQ_INSERT_TAIL(&zfs_vdevs, vdev, v_alllink);
}
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (vdev);
}
static void
vdev_set_initial_state(vdev_t *vdev, const nvlist_t *nvlist)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
uint64_t is_offline, is_faulted, is_degraded, is_removed, isnt_present;
uint64_t is_log;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
is_offline = is_removed = is_faulted = is_degraded = isnt_present = 0;
is_log = 0;
(void) nvlist_find(nvlist, ZPOOL_CONFIG_OFFLINE, DATA_TYPE_UINT64, NULL,
&is_offline, NULL);
(void) nvlist_find(nvlist, ZPOOL_CONFIG_REMOVED, DATA_TYPE_UINT64, NULL,
&is_removed, NULL);
(void) nvlist_find(nvlist, ZPOOL_CONFIG_FAULTED, DATA_TYPE_UINT64, NULL,
&is_faulted, NULL);
(void) nvlist_find(nvlist, ZPOOL_CONFIG_DEGRADED, DATA_TYPE_UINT64,
NULL, &is_degraded, NULL);
(void) nvlist_find(nvlist, ZPOOL_CONFIG_NOT_PRESENT, DATA_TYPE_UINT64,
NULL, &isnt_present, NULL);
(void) nvlist_find(nvlist, ZPOOL_CONFIG_IS_LOG, DATA_TYPE_UINT64, NULL,
&is_log, NULL);
if (is_offline != 0)
vdev->v_state = VDEV_STATE_OFFLINE;
else if (is_removed != 0)
vdev->v_state = VDEV_STATE_REMOVED;
else if (is_faulted != 0)
vdev->v_state = VDEV_STATE_FAULTED;
else if (is_degraded != 0)
vdev->v_state = VDEV_STATE_DEGRADED;
else if (isnt_present != 0)
vdev->v_state = VDEV_STATE_CANT_OPEN;
vdev->v_islog = is_log != 0;
}
static int
vdev_init(uint64_t guid, const nvlist_t *nvlist, vdev_t **vdevp)
{
uint64_t id, ashift, asize, nparity;
const char *path;
const char *type;
int len, pathlen;
char *name;
vdev_t *vdev;
if (nvlist_find(nvlist, ZPOOL_CONFIG_ID, DATA_TYPE_UINT64, NULL, &id,
NULL) ||
nvlist_find(nvlist, ZPOOL_CONFIG_TYPE, DATA_TYPE_STRING, NULL,
&type, &len)) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (ENOENT);
}
if (memcmp(type, VDEV_TYPE_MIRROR, len) != 0 &&
memcmp(type, VDEV_TYPE_DISK, len) != 0 &&
#ifdef ZFS_TEST
memcmp(type, VDEV_TYPE_FILE, len) != 0 &&
#endif
memcmp(type, VDEV_TYPE_RAIDZ, len) != 0 &&
memcmp(type, VDEV_TYPE_INDIRECT, len) != 0 &&
memcmp(type, VDEV_TYPE_REPLACING, len) != 0 &&
memcmp(type, VDEV_TYPE_HOLE, len) != 0) {
printf("ZFS: can only boot from disk, mirror, raidz1, "
"raidz2 and raidz3 vdevs, got: %.*s\n", len, type);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
if (memcmp(type, VDEV_TYPE_MIRROR, len) == 0)
vdev = vdev_create(guid, vdev_mirror_read);
else if (memcmp(type, VDEV_TYPE_RAIDZ, len) == 0)
vdev = vdev_create(guid, vdev_raidz_read);
else if (memcmp(type, VDEV_TYPE_REPLACING, len) == 0)
vdev = vdev_create(guid, vdev_replacing_read);
else if (memcmp(type, VDEV_TYPE_INDIRECT, len) == 0) {
vdev_indirect_config_t *vic;
vdev = vdev_create(guid, vdev_indirect_read);
if (vdev != NULL) {
vdev->v_state = VDEV_STATE_HEALTHY;
vic = &vdev->vdev_indirect_config;
nvlist_find(nvlist,
ZPOOL_CONFIG_INDIRECT_OBJECT,
DATA_TYPE_UINT64,
NULL, &vic->vic_mapping_object, NULL);
nvlist_find(nvlist,
ZPOOL_CONFIG_INDIRECT_BIRTHS,
DATA_TYPE_UINT64,
NULL, &vic->vic_births_object, NULL);
nvlist_find(nvlist,
ZPOOL_CONFIG_PREV_INDIRECT_VDEV,
DATA_TYPE_UINT64,
NULL, &vic->vic_prev_indirect_vdev, NULL);
}
} else if (memcmp(type, VDEV_TYPE_HOLE, len) == 0) {
vdev = vdev_create(guid, vdev_missing_read);
} else {
vdev = vdev_create(guid, vdev_disk_read);
}
if (vdev == NULL)
return (ENOMEM);
vdev_set_initial_state(vdev, nvlist);
vdev->v_id = id;
if (nvlist_find(nvlist, ZPOOL_CONFIG_ASHIFT,
DATA_TYPE_UINT64, NULL, &ashift, NULL) == 0)
vdev->v_ashift = ashift;
if (nvlist_find(nvlist, ZPOOL_CONFIG_ASIZE,
DATA_TYPE_UINT64, NULL, &asize, NULL) == 0) {
vdev->v_psize = asize +
VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
}
if (nvlist_find(nvlist, ZPOOL_CONFIG_NPARITY,
DATA_TYPE_UINT64, NULL, &nparity, NULL) == 0)
vdev->v_nparity = nparity;
if (nvlist_find(nvlist, ZPOOL_CONFIG_PATH,
DATA_TYPE_STRING, NULL, &path, &pathlen) == 0) {
char prefix[] = "/dev/";
len = strlen(prefix);
if (len < pathlen && memcmp(path, prefix, len) == 0) {
path += len;
pathlen -= len;
}
name = malloc(pathlen + 1);
bcopy(path, name, pathlen);
name[pathlen] = '\0';
vdev->v_name = name;
} else {
name = NULL;
if (memcmp(type, VDEV_TYPE_RAIDZ, len) == 0) {
if (vdev->v_nparity < 1 ||
vdev->v_nparity > 3) {
printf("ZFS: invalid raidz parity: %d\n",
vdev->v_nparity);
return (EIO);
}
(void) asprintf(&name, "%.*s%d-%" PRIu64, len, type,
vdev->v_nparity, id);
} else {
(void) asprintf(&name, "%.*s-%" PRIu64, len, type, id);
}
vdev->v_name = name;
}
*vdevp = vdev;
return (0);
}
/*
* Find slot for vdev. We return either NULL to signal to use
* STAILQ_INSERT_HEAD, or we return link element to be used with
* STAILQ_INSERT_AFTER.
*/
static vdev_t *
vdev_find_previous(vdev_t *top_vdev, vdev_t *vdev)
{
vdev_t *v, *previous;
if (STAILQ_EMPTY(&top_vdev->v_children))
return (NULL);
previous = NULL;
STAILQ_FOREACH(v, &top_vdev->v_children, v_childlink) {
if (v->v_id > vdev->v_id)
return (previous);
if (v->v_id == vdev->v_id)
return (v);
if (v->v_id < vdev->v_id)
previous = v;
}
return (previous);
}
static size_t
vdev_child_count(vdev_t *vdev)
{
vdev_t *v;
size_t count;
count = 0;
STAILQ_FOREACH(v, &vdev->v_children, v_childlink) {
count++;
}
return (count);
}
/*
* Insert vdev into top_vdev children list. List is ordered by v_id.
*/
static void
vdev_insert(vdev_t *top_vdev, vdev_t *vdev)
{
vdev_t *previous;
size_t count;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* The top level vdev can appear in random order, depending how
* the firmware is presenting the disk devices.
* However, we will insert vdev to create list ordered by v_id,
* so we can use either STAILQ_INSERT_HEAD or STAILQ_INSERT_AFTER
* as STAILQ does not have insert before.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
previous = vdev_find_previous(top_vdev, vdev);
if (previous == NULL) {
STAILQ_INSERT_HEAD(&top_vdev->v_children, vdev, v_childlink);
} else if (previous->v_id == vdev->v_id) {
/*
* This vdev was configured from label config,
* do not insert duplicate.
*/
return;
} else {
STAILQ_INSERT_AFTER(&top_vdev->v_children, previous, vdev,
v_childlink);
}
count = vdev_child_count(top_vdev);
if (top_vdev->v_nchildren < count)
top_vdev->v_nchildren = count;
}
static int
vdev_from_nvlist(spa_t *spa, uint64_t top_guid, const nvlist_t *nvlist)
{
vdev_t *top_vdev, *vdev;
nvlist_t **kids = NULL;
int rc, nkids;
/* Get top vdev. */
top_vdev = vdev_find(top_guid);
if (top_vdev == NULL) {
rc = vdev_init(top_guid, nvlist, &top_vdev);
if (rc != 0)
return (rc);
top_vdev->v_spa = spa;
top_vdev->v_top = top_vdev;
vdev_insert(spa->spa_root_vdev, top_vdev);
}
/* Add children if there are any. */
rc = nvlist_find(nvlist, ZPOOL_CONFIG_CHILDREN, DATA_TYPE_NVLIST_ARRAY,
&nkids, &kids, NULL);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (rc == 0) {
for (int i = 0; i < nkids; i++) {
uint64_t guid;
rc = nvlist_find(kids[i], ZPOOL_CONFIG_GUID,
DATA_TYPE_UINT64, NULL, &guid, NULL);
if (rc != 0)
goto done;
rc = vdev_init(guid, kids[i], &vdev);
if (rc != 0)
goto done;
vdev->v_spa = spa;
vdev->v_top = top_vdev;
vdev_insert(top_vdev, vdev);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
} else {
/*
* When there are no children, nvlist_find() does return
* error, reset it because leaf devices have no children.
*/
rc = 0;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
done:
if (kids != NULL) {
for (int i = 0; i < nkids; i++)
nvlist_destroy(kids[i]);
free(kids);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (rc);
}
static int
vdev_init_from_label(spa_t *spa, const nvlist_t *nvlist)
{
uint64_t pool_guid, top_guid;
nvlist_t *vdevs;
int rc;
if (nvlist_find(nvlist, ZPOOL_CONFIG_POOL_GUID, DATA_TYPE_UINT64,
NULL, &pool_guid, NULL) ||
nvlist_find(nvlist, ZPOOL_CONFIG_TOP_GUID, DATA_TYPE_UINT64,
NULL, &top_guid, NULL) ||
nvlist_find(nvlist, ZPOOL_CONFIG_VDEV_TREE, DATA_TYPE_NVLIST,
NULL, &vdevs, NULL)) {
printf("ZFS: can't find vdev details\n");
return (ENOENT);
}
rc = vdev_from_nvlist(spa, top_guid, vdevs);
nvlist_destroy(vdevs);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static void
vdev_set_state(vdev_t *vdev)
{
vdev_t *kid;
int good_kids;
int bad_kids;
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
vdev_set_state(kid);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* A mirror or raidz is healthy if all its kids are healthy. A
* mirror is degraded if any of its kids is healthy; a raidz
* is degraded if at most nparity kids are offline.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
if (STAILQ_FIRST(&vdev->v_children)) {
good_kids = 0;
bad_kids = 0;
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
if (kid->v_state == VDEV_STATE_HEALTHY)
good_kids++;
else
bad_kids++;
}
if (bad_kids == 0) {
vdev->v_state = VDEV_STATE_HEALTHY;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
} else {
if (vdev->v_read == vdev_mirror_read) {
if (good_kids) {
vdev->v_state = VDEV_STATE_DEGRADED;
} else {
vdev->v_state = VDEV_STATE_OFFLINE;
}
} else if (vdev->v_read == vdev_raidz_read) {
if (bad_kids > vdev->v_nparity) {
vdev->v_state = VDEV_STATE_OFFLINE;
} else {
vdev->v_state = VDEV_STATE_DEGRADED;
}
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
}
}
static int
vdev_update_from_nvlist(uint64_t top_guid, const nvlist_t *nvlist)
{
vdev_t *vdev;
nvlist_t **kids = NULL;
int rc, nkids;
/* Update top vdev. */
vdev = vdev_find(top_guid);
if (vdev != NULL)
vdev_set_initial_state(vdev, nvlist);
/* Update children if there are any. */
rc = nvlist_find(nvlist, ZPOOL_CONFIG_CHILDREN, DATA_TYPE_NVLIST_ARRAY,
&nkids, &kids, NULL);
if (rc == 0) {
for (int i = 0; i < nkids; i++) {
uint64_t guid;
rc = nvlist_find(kids[i], ZPOOL_CONFIG_GUID,
DATA_TYPE_UINT64, NULL, &guid, NULL);
if (rc != 0)
break;
vdev = vdev_find(guid);
if (vdev != NULL)
vdev_set_initial_state(vdev, kids[i]);
}
} else {
rc = 0;
}
if (kids != NULL) {
for (int i = 0; i < nkids; i++)
nvlist_destroy(kids[i]);
free(kids);
}
return (rc);
}
static int
vdev_init_from_nvlist(spa_t *spa, const nvlist_t *nvlist)
{
uint64_t pool_guid, vdev_children;
nvlist_t *vdevs = NULL, **kids = NULL;
int rc, nkids;
if (nvlist_find(nvlist, ZPOOL_CONFIG_POOL_GUID, DATA_TYPE_UINT64,
NULL, &pool_guid, NULL) ||
nvlist_find(nvlist, ZPOOL_CONFIG_VDEV_CHILDREN, DATA_TYPE_UINT64,
NULL, &vdev_children, NULL) ||
nvlist_find(nvlist, ZPOOL_CONFIG_VDEV_TREE, DATA_TYPE_NVLIST,
NULL, &vdevs, NULL)) {
printf("ZFS: can't find vdev details\n");
return (ENOENT);
}
/* Wrong guid?! */
if (spa->spa_guid != pool_guid) {
nvlist_destroy(vdevs);
return (EINVAL);
}
spa->spa_root_vdev->v_nchildren = vdev_children;
rc = nvlist_find(vdevs, ZPOOL_CONFIG_CHILDREN, DATA_TYPE_NVLIST_ARRAY,
&nkids, &kids, NULL);
nvlist_destroy(vdevs);
/*
* MOS config has at least one child for root vdev.
*/
if (rc != 0)
return (rc);
for (int i = 0; i < nkids; i++) {
uint64_t guid;
vdev_t *vdev;
rc = nvlist_find(kids[i], ZPOOL_CONFIG_GUID, DATA_TYPE_UINT64,
NULL, &guid, NULL);
if (rc != 0)
break;
vdev = vdev_find(guid);
/*
* Top level vdev is missing, create it.
*/
if (vdev == NULL)
rc = vdev_from_nvlist(spa, guid, kids[i]);
else
rc = vdev_update_from_nvlist(guid, kids[i]);
if (rc != 0)
break;
}
if (kids != NULL) {
for (int i = 0; i < nkids; i++)
nvlist_destroy(kids[i]);
free(kids);
}
/*
* Re-evaluate top-level vdev state.
*/
vdev_set_state(spa->spa_root_vdev);
return (rc);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static spa_t *
spa_find_by_guid(uint64_t guid)
{
spa_t *spa;
STAILQ_FOREACH(spa, &zfs_pools, spa_link)
if (spa->spa_guid == guid)
return (spa);
return (NULL);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static spa_t *
spa_find_by_name(const char *name)
{
spa_t *spa;
STAILQ_FOREACH(spa, &zfs_pools, spa_link)
if (strcmp(spa->spa_name, name) == 0)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (spa);
return (NULL);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static spa_t *
spa_find_by_dev(struct zfs_devdesc *dev)
{
if (dev->dd.d_dev->dv_type != DEVT_ZFS)
return (NULL);
if (dev->pool_guid == 0)
return (STAILQ_FIRST(&zfs_pools));
return (spa_find_by_guid(dev->pool_guid));
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static spa_t *
spa_create(uint64_t guid, const char *name)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
spa_t *spa;
if ((spa = calloc(1, sizeof(spa_t))) == NULL)
return (NULL);
if ((spa->spa_name = strdup(name)) == NULL) {
free(spa);
return (NULL);
}
spa->spa_uberblock = &spa->spa_uberblock_master;
spa->spa_mos = &spa->spa_mos_master;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
spa->spa_guid = guid;
spa->spa_root_vdev = vdev_create(guid, NULL);
if (spa->spa_root_vdev == NULL) {
free(spa->spa_name);
free(spa);
return (NULL);
}
spa->spa_root_vdev->v_name = strdup("root");
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
STAILQ_INSERT_TAIL(&zfs_pools, spa, spa_link);
return (spa);
}
static const char *
state_name(vdev_state_t state)
{
static const char *names[] = {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
"UNKNOWN",
"CLOSED",
"OFFLINE",
"REMOVED",
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
"CANT_OPEN",
"FAULTED",
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
"DEGRADED",
"ONLINE"
};
return (names[state]);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
#ifdef BOOT2
#define pager_printf printf
#else
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
pager_printf(const char *fmt, ...)
{
char line[80];
va_list args;
va_start(args, fmt);
vsnprintf(line, sizeof(line), fmt, args);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
va_end(args);
return (pager_output(line));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
#endif
#define STATUS_FORMAT " %s %s\n"
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
print_state(int indent, const char *name, vdev_state_t state)
{
int i;
char buf[512];
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
buf[0] = 0;
for (i = 0; i < indent; i++)
strcat(buf, " ");
strcat(buf, name);
return (pager_printf(STATUS_FORMAT, buf, state_name(state)));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
vdev_status(vdev_t *vdev, int indent)
{
vdev_t *kid;
int ret;
if (vdev->v_islog) {
(void) pager_output(" logs\n");
indent++;
}
ret = print_state(indent, vdev->v_name, vdev->v_state);
if (ret != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
ret = vdev_status(kid, indent + 1);
if (ret != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
spa_status(spa_t *spa)
{
static char bootfs[ZFS_MAXNAMELEN];
uint64_t rootid;
vdev_list_t *vlist;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
vdev_t *vdev;
int good_kids, bad_kids, degraded_kids, ret;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
vdev_state_t state;
ret = pager_printf(" pool: %s\n", spa->spa_name);
if (ret != 0)
return (ret);
if (zfs_get_root(spa, &rootid) == 0 &&
zfs_rlookup(spa, rootid, bootfs) == 0) {
if (bootfs[0] == '\0')
ret = pager_printf("bootfs: %s\n", spa->spa_name);
else
ret = pager_printf("bootfs: %s/%s\n", spa->spa_name,
bootfs);
if (ret != 0)
return (ret);
}
ret = pager_printf("config:\n\n");
if (ret != 0)
return (ret);
ret = pager_printf(STATUS_FORMAT, "NAME", "STATE");
if (ret != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
good_kids = 0;
degraded_kids = 0;
bad_kids = 0;
vlist = &spa->spa_root_vdev->v_children;
STAILQ_FOREACH(vdev, vlist, v_childlink) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (vdev->v_state == VDEV_STATE_HEALTHY)
good_kids++;
else if (vdev->v_state == VDEV_STATE_DEGRADED)
degraded_kids++;
else
bad_kids++;
}
state = VDEV_STATE_CLOSED;
if (good_kids > 0 && (degraded_kids + bad_kids) == 0)
state = VDEV_STATE_HEALTHY;
else if ((good_kids + degraded_kids) > 0)
state = VDEV_STATE_DEGRADED;
ret = print_state(0, spa->spa_name, state);
if (ret != 0)
return (ret);
STAILQ_FOREACH(vdev, vlist, v_childlink) {
ret = vdev_status(vdev, 1);
if (ret != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
spa_all_status(void)
{
spa_t *spa;
int first = 1, ret = 0;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
STAILQ_FOREACH(spa, &zfs_pools, spa_link) {
if (!first) {
ret = pager_printf("\n");
if (ret != 0)
return (ret);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
first = 0;
ret = spa_status(spa);
if (ret != 0)
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (ret);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static uint64_t
vdev_label_offset(uint64_t psize, int l, uint64_t offset)
{
uint64_t label_offset;
if (l < VDEV_LABELS / 2)
label_offset = 0;
else
label_offset = psize - VDEV_LABELS * sizeof (vdev_label_t);
return (offset + l * sizeof (vdev_label_t) + label_offset);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
vdev_uberblock_compare(const uberblock_t *ub1, const uberblock_t *ub2)
{
unsigned int seq1 = 0;
unsigned int seq2 = 0;
int cmp = AVL_CMP(ub1->ub_txg, ub2->ub_txg);
if (cmp != 0)
return (cmp);
cmp = AVL_CMP(ub1->ub_timestamp, ub2->ub_timestamp);
if (cmp != 0)
return (cmp);
if (MMP_VALID(ub1) && MMP_SEQ_VALID(ub1))
seq1 = MMP_SEQ(ub1);
if (MMP_VALID(ub2) && MMP_SEQ_VALID(ub2))
seq2 = MMP_SEQ(ub2);
return (AVL_CMP(seq1, seq2));
}
static int
uberblock_verify(uberblock_t *ub)
{
if (ub->ub_magic == BSWAP_64((uint64_t)UBERBLOCK_MAGIC)) {
byteswap_uint64_array(ub, sizeof (uberblock_t));
}
if (ub->ub_magic != UBERBLOCK_MAGIC ||
!SPA_VERSION_IS_SUPPORTED(ub->ub_version))
return (EINVAL);
return (0);
}
static int
vdev_label_read(vdev_t *vd, int l, void *buf, uint64_t offset,
size_t size)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
blkptr_t bp;
off_t off;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
off = vdev_label_offset(vd->v_psize, l, offset);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
BP_ZERO(&bp);
BP_SET_LSIZE(&bp, size);
BP_SET_PSIZE(&bp, size);
BP_SET_CHECKSUM(&bp, ZIO_CHECKSUM_LABEL);
BP_SET_COMPRESS(&bp, ZIO_COMPRESS_OFF);
DVA_SET_OFFSET(BP_IDENTITY(&bp), off);
ZIO_SET_CHECKSUM(&bp.blk_cksum, off, 0, 0, 0);
return (vdev_read_phys(vd, &bp, buf, off, size));
}
/*
* We do need to be sure we write to correct location.
* Our vdev label does consist of 4 fields:
* pad1 (8k), reserved.
* bootenv (8k), checksummed, previously reserved, may contian garbage.
* vdev_phys (112k), checksummed
* uberblock ring (128k), checksummed.
*
* Since bootenv area may contain garbage, we can not reliably read it, as
* we can get checksum errors.
* Next best thing is vdev_phys - it is just after bootenv. It still may
* be corrupted, but in such case we will miss this one write.
*/
static int
vdev_label_write_validate(vdev_t *vd, int l, uint64_t offset)
{
uint64_t off, o_phys;
void *buf;
size_t size = VDEV_PHYS_SIZE;
int rc;
o_phys = offsetof(vdev_label_t, vl_vdev_phys);
off = vdev_label_offset(vd->v_psize, l, o_phys);
/* off should be 8K from bootenv */
if (vdev_label_offset(vd->v_psize, l, offset) + VDEV_PAD_SIZE != off)
return (EINVAL);
buf = malloc(size);
if (buf == NULL)
return (ENOMEM);
/* Read vdev_phys */
rc = vdev_label_read(vd, l, buf, o_phys, size);
free(buf);
return (rc);
}
static int
vdev_label_write(vdev_t *vd, int l, vdev_boot_envblock_t *be, uint64_t offset)
{
zio_checksum_info_t *ci;
zio_cksum_t cksum;
off_t off;
size_t size = VDEV_PAD_SIZE;
int rc;
if (vd->v_phys_write == NULL)
return (ENOTSUP);
off = vdev_label_offset(vd->v_psize, l, offset);
rc = vdev_label_write_validate(vd, l, offset);
if (rc != 0) {
return (rc);
}
ci = &zio_checksum_table[ZIO_CHECKSUM_LABEL];
be->vbe_zbt.zec_magic = ZEC_MAGIC;
zio_checksum_label_verifier(&be->vbe_zbt.zec_cksum, off);
ci->ci_func[0](be, size, NULL, &cksum);
be->vbe_zbt.zec_cksum = cksum;
return (vdev_write_phys(vd, be, off, size));
}
static int
vdev_write_bootenv_impl(vdev_t *vdev, vdev_boot_envblock_t *be)
{
vdev_t *kid;
int rv = 0, rc;
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
if (kid->v_state != VDEV_STATE_HEALTHY)
continue;
rc = vdev_write_bootenv_impl(kid, be);
if (rv == 0)
rv = rc;
}
/*
* Non-leaf vdevs do not have v_phys_write.
*/
if (vdev->v_phys_write == NULL)
return (rv);
for (int l = 0; l < VDEV_LABELS; l++) {
rc = vdev_label_write(vdev, l, be,
offsetof(vdev_label_t, vl_be));
if (rc != 0) {
printf("failed to write bootenv to %s label %d: %d\n",
vdev->v_name ? vdev->v_name : "unknown", l, rc);
rv = rc;
}
}
return (rv);
}
int
vdev_write_bootenv(vdev_t *vdev, nvlist_t *nvl)
{
vdev_boot_envblock_t *be;
nvlist_t nv, *nvp;
uint64_t version;
int rv;
if (nvl->nv_size > sizeof(be->vbe_bootenv))
return (E2BIG);
version = VB_RAW;
nvp = vdev_read_bootenv(vdev);
if (nvp != NULL) {
nvlist_find(nvp, BOOTENV_VERSION, DATA_TYPE_UINT64, NULL,
&version, NULL);
nvlist_destroy(nvp);
}
be = calloc(1, sizeof(*be));
if (be == NULL)
return (ENOMEM);
be->vbe_version = version;
switch (version) {
case VB_RAW:
/*
* If there is no envmap, we will just wipe bootenv.
*/
nvlist_find(nvl, GRUB_ENVMAP, DATA_TYPE_STRING, NULL,
be->vbe_bootenv, NULL);
rv = 0;
break;
case VB_NVLIST:
nv.nv_header = nvl->nv_header;
nv.nv_asize = nvl->nv_asize;
nv.nv_size = nvl->nv_size;
bcopy(&nv.nv_header, be->vbe_bootenv, sizeof(nv.nv_header));
nv.nv_data = be->vbe_bootenv + sizeof(nvs_header_t);
bcopy(nvl->nv_data, nv.nv_data, nv.nv_size);
rv = nvlist_export(&nv);
break;
default:
rv = EINVAL;
break;
}
if (rv == 0) {
be->vbe_version = htobe64(be->vbe_version);
rv = vdev_write_bootenv_impl(vdev, be);
}
free(be);
return (rv);
}
/*
* Read the bootenv area from pool label, return the nvlist from it.
* We return from first successful read.
*/
nvlist_t *
vdev_read_bootenv(vdev_t *vdev)
{
vdev_t *kid;
nvlist_t *benv;
vdev_boot_envblock_t *be;
char *command;
bool ok;
int rv;
STAILQ_FOREACH(kid, &vdev->v_children, v_childlink) {
if (kid->v_state != VDEV_STATE_HEALTHY)
continue;
benv = vdev_read_bootenv(kid);
if (benv != NULL)
return (benv);
}
be = malloc(sizeof (*be));
if (be == NULL)
return (NULL);
rv = 0;
for (int l = 0; l < VDEV_LABELS; l++) {
rv = vdev_label_read(vdev, l, be,
offsetof(vdev_label_t, vl_be),
sizeof (*be));
if (rv == 0)
break;
}
if (rv != 0) {
free(be);
return (NULL);
}
be->vbe_version = be64toh(be->vbe_version);
switch (be->vbe_version) {
case VB_RAW:
/*
* we have textual data in vbe_bootenv, create nvlist
* with key "envmap".
*/
benv = nvlist_create(NV_UNIQUE_NAME);
if (benv != NULL) {
if (*be->vbe_bootenv == '\0') {
nvlist_add_uint64(benv, BOOTENV_VERSION,
VB_NVLIST);
break;
}
nvlist_add_uint64(benv, BOOTENV_VERSION, VB_RAW);
be->vbe_bootenv[sizeof (be->vbe_bootenv) - 1] = '\0';
nvlist_add_string(benv, GRUB_ENVMAP, be->vbe_bootenv);
}
break;
case VB_NVLIST:
benv = nvlist_import(be->vbe_bootenv, sizeof(be->vbe_bootenv));
break;
default:
command = (char *)be;
ok = false;
/* Check for legacy zfsbootcfg command string */
for (int i = 0; command[i] != '\0'; i++) {
if (iscntrl(command[i])) {
ok = false;
break;
} else {
ok = true;
}
}
benv = nvlist_create(NV_UNIQUE_NAME);
if (benv != NULL) {
if (ok)
nvlist_add_string(benv, FREEBSD_BOOTONCE,
command);
else
nvlist_add_uint64(benv, BOOTENV_VERSION,
VB_NVLIST);
}
break;
}
free(be);
return (benv);
}
static uint64_t
vdev_get_label_asize(nvlist_t *nvl)
{
nvlist_t *vdevs;
uint64_t asize;
const char *type;
int len;
asize = 0;
/* Get vdev tree */
if (nvlist_find(nvl, ZPOOL_CONFIG_VDEV_TREE, DATA_TYPE_NVLIST,
NULL, &vdevs, NULL) != 0)
return (asize);
/*
* Get vdev type. We will calculate asize for raidz, mirror and disk.
* For raidz, the asize is raw size of all children.
*/
if (nvlist_find(vdevs, ZPOOL_CONFIG_TYPE, DATA_TYPE_STRING,
NULL, &type, &len) != 0)
goto done;
if (memcmp(type, VDEV_TYPE_MIRROR, len) != 0 &&
memcmp(type, VDEV_TYPE_DISK, len) != 0 &&
memcmp(type, VDEV_TYPE_RAIDZ, len) != 0)
goto done;
if (nvlist_find(vdevs, ZPOOL_CONFIG_ASIZE, DATA_TYPE_UINT64,
NULL, &asize, NULL) != 0)
goto done;
if (memcmp(type, VDEV_TYPE_RAIDZ, len) == 0) {
nvlist_t **kids;
int nkids;
if (nvlist_find(vdevs, ZPOOL_CONFIG_CHILDREN,
DATA_TYPE_NVLIST_ARRAY, &nkids, &kids, NULL) != 0) {
asize = 0;
goto done;
}
asize /= nkids;
for (int i = 0; i < nkids; i++)
nvlist_destroy(kids[i]);
free(kids);
}
asize += VDEV_LABEL_START_SIZE + VDEV_LABEL_END_SIZE;
done:
nvlist_destroy(vdevs);
return (asize);
}
static nvlist_t *
vdev_label_read_config(vdev_t *vd, uint64_t txg)
{
vdev_phys_t *label;
uint64_t best_txg = 0;
uint64_t label_txg = 0;
uint64_t asize;
nvlist_t *nvl = NULL, *tmp;
int error;
label = malloc(sizeof (vdev_phys_t));
if (label == NULL)
return (NULL);
for (int l = 0; l < VDEV_LABELS; l++) {
if (vdev_label_read(vd, l, label,
offsetof(vdev_label_t, vl_vdev_phys),
sizeof (vdev_phys_t)))
continue;
tmp = nvlist_import(label->vp_nvlist,
sizeof(label->vp_nvlist));
if (tmp == NULL)
continue;
error = nvlist_find(tmp, ZPOOL_CONFIG_POOL_TXG,
DATA_TYPE_UINT64, NULL, &label_txg, NULL);
if (error != 0 || label_txg == 0) {
nvlist_destroy(nvl);
nvl = tmp;
goto done;
}
if (label_txg <= txg && label_txg > best_txg) {
best_txg = label_txg;
nvlist_destroy(nvl);
nvl = tmp;
tmp = NULL;
/*
* Use asize from pool config. We need this
* because we can get bad value from BIOS.
*/
asize = vdev_get_label_asize(nvl);
if (asize != 0) {
vd->v_psize = asize;
}
}
nvlist_destroy(tmp);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
if (best_txg == 0) {
nvlist_destroy(nvl);
nvl = NULL;
}
done:
free(label);
return (nvl);
}
static void
vdev_uberblock_load(vdev_t *vd, uberblock_t *ub)
{
uberblock_t *buf;
buf = malloc(VDEV_UBERBLOCK_SIZE(vd));
if (buf == NULL)
return;
for (int l = 0; l < VDEV_LABELS; l++) {
for (int n = 0; n < VDEV_UBERBLOCK_COUNT(vd); n++) {
if (vdev_label_read(vd, l, buf,
VDEV_UBERBLOCK_OFFSET(vd, n),
VDEV_UBERBLOCK_SIZE(vd)))
continue;
if (uberblock_verify(buf) != 0)
continue;
if (vdev_uberblock_compare(buf, ub) > 0)
*ub = *buf;
}
}
free(buf);
}
static int
vdev_probe(vdev_phys_read_t *_read, vdev_phys_write_t *_write, void *priv,
spa_t **spap)
{
vdev_t vtmp;
spa_t *spa;
vdev_t *vdev;
nvlist_t *nvl;
uint64_t val;
uint64_t guid, vdev_children;
uint64_t pool_txg, pool_guid;
const char *pool_name;
int rc, namelen;
/*
* Load the vdev label and figure out which
* uberblock is most current.
*/
memset(&vtmp, 0, sizeof(vtmp));
vtmp.v_phys_read = _read;
vtmp.v_phys_write = _write;
vtmp.v_priv = priv;
vtmp.v_psize = P2ALIGN(ldi_get_size(priv),
(uint64_t)sizeof (vdev_label_t));
/* Test for minimum device size. */
if (vtmp.v_psize < SPA_MINDEVSIZE)
return (EIO);
nvl = vdev_label_read_config(&vtmp, UINT64_MAX);
if (nvl == NULL)
return (EIO);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (nvlist_find(nvl, ZPOOL_CONFIG_VERSION, DATA_TYPE_UINT64,
NULL, &val, NULL) != 0) {
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
if (!SPA_VERSION_IS_SUPPORTED(val)) {
printf("ZFS: unsupported ZFS version %u (should be %u)\n",
(unsigned)val, (unsigned)SPA_VERSION);
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
/* Check ZFS features for read */
rc = nvlist_check_features_for_read(nvl);
if (rc != 0) {
nvlist_destroy(nvl);
return (EIO);
}
if (nvlist_find(nvl, ZPOOL_CONFIG_POOL_STATE, DATA_TYPE_UINT64,
NULL, &val, NULL) != 0) {
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
if (val == POOL_STATE_DESTROYED) {
/* We don't boot only from destroyed pools. */
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
if (nvlist_find(nvl, ZPOOL_CONFIG_POOL_TXG, DATA_TYPE_UINT64,
NULL, &pool_txg, NULL) != 0 ||
nvlist_find(nvl, ZPOOL_CONFIG_POOL_GUID, DATA_TYPE_UINT64,
NULL, &pool_guid, NULL) != 0 ||
nvlist_find(nvl, ZPOOL_CONFIG_POOL_NAME, DATA_TYPE_STRING,
NULL, &pool_name, &namelen) != 0) {
/*
* Cache and spare devices end up here - just ignore
* them.
*/
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
/*
* Create the pool if this is the first time we've seen it.
*/
spa = spa_find_by_guid(pool_guid);
if (spa == NULL) {
char *name;
nvlist_find(nvl, ZPOOL_CONFIG_VDEV_CHILDREN,
DATA_TYPE_UINT64, NULL, &vdev_children, NULL);
name = malloc(namelen + 1);
if (name == NULL) {
nvlist_destroy(nvl);
return (ENOMEM);
}
bcopy(pool_name, name, namelen);
name[namelen] = '\0';
spa = spa_create(pool_guid, name);
free(name);
if (spa == NULL) {
nvlist_destroy(nvl);
return (ENOMEM);
}
spa->spa_root_vdev->v_nchildren = vdev_children;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
if (pool_txg > spa->spa_txg)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
spa->spa_txg = pool_txg;
/*
* Get the vdev tree and create our in-core copy of it.
* If we already have a vdev with this guid, this must
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
* be some kind of alias (overlapping slices, dangerously dedicated
* disks etc).
*/
if (nvlist_find(nvl, ZPOOL_CONFIG_GUID, DATA_TYPE_UINT64,
NULL, &guid, NULL) != 0) {
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
vdev = vdev_find(guid);
/* Has this vdev already been inited? */
if (vdev && vdev->v_phys_read) {
nvlist_destroy(nvl);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = vdev_init_from_label(spa, nvl);
nvlist_destroy(nvl);
if (rc != 0)
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* We should already have created an incomplete vdev for this
* vdev. Find it and initialise it with our read proc.
*/
vdev = vdev_find(guid);
if (vdev != NULL) {
vdev->v_phys_read = _read;
vdev->v_phys_write = _write;
vdev->v_priv = priv;
vdev->v_psize = vtmp.v_psize;
/*
* If no other state is set, mark vdev healthy.
*/
if (vdev->v_state == VDEV_STATE_UNKNOWN)
vdev->v_state = VDEV_STATE_HEALTHY;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
} else {
printf("ZFS: inconsistent nvlist contents\n");
return (EIO);
}
if (vdev->v_islog)
spa->spa_with_log = vdev->v_islog;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Re-evaluate top-level vdev state.
*/
vdev_set_state(vdev->v_top);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Ok, we are happy with the pool so far. Lets find
* the best uberblock and then we can actually access
* the contents of the pool.
*/
vdev_uberblock_load(vdev, spa->spa_uberblock);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (spap != NULL)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*spap = spa;
return (0);
}
static int
ilog2(int n)
{
int v;
for (v = 0; v < 32; v++)
if (n == (1 << v))
return (v);
return (-1);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
zio_read_gang(const spa_t *spa, const blkptr_t *bp, void *buf)
{
blkptr_t gbh_bp;
zio_gbh_phys_t zio_gb;
char *pbuf;
int i;
/* Artificial BP for gang block header. */
gbh_bp = *bp;
BP_SET_PSIZE(&gbh_bp, SPA_GANGBLOCKSIZE);
BP_SET_LSIZE(&gbh_bp, SPA_GANGBLOCKSIZE);
BP_SET_CHECKSUM(&gbh_bp, ZIO_CHECKSUM_GANG_HEADER);
BP_SET_COMPRESS(&gbh_bp, ZIO_COMPRESS_OFF);
for (i = 0; i < SPA_DVAS_PER_BP; i++)
DVA_SET_GANG(&gbh_bp.blk_dva[i], 0);
/* Read gang header block using the artificial BP. */
if (zio_read(spa, &gbh_bp, &zio_gb))
return (EIO);
pbuf = buf;
for (i = 0; i < SPA_GBH_NBLKPTRS; i++) {
blkptr_t *gbp = &zio_gb.zg_blkptr[i];
if (BP_IS_HOLE(gbp))
continue;
if (zio_read(spa, gbp, pbuf))
return (EIO);
pbuf += BP_GET_PSIZE(gbp);
}
if (zio_checksum_verify(spa, bp, buf))
return (EIO);
return (0);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
zio_read(const spa_t *spa, const blkptr_t *bp, void *buf)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int cpfunc = BP_GET_COMPRESS(bp);
uint64_t align, size;
void *pbuf;
int i, error;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Process data embedded in block pointer
*/
if (BP_IS_EMBEDDED(bp)) {
ASSERT(BPE_GET_ETYPE(bp) == BP_EMBEDDED_TYPE_DATA);
size = BPE_GET_PSIZE(bp);
ASSERT(size <= BPE_PAYLOAD_SIZE);
if (cpfunc != ZIO_COMPRESS_OFF)
pbuf = malloc(size);
else
pbuf = buf;
if (pbuf == NULL)
return (ENOMEM);
decode_embedded_bp_compressed(bp, pbuf);
error = 0;
if (cpfunc != ZIO_COMPRESS_OFF) {
error = zio_decompress_data(cpfunc, pbuf,
size, buf, BP_GET_LSIZE(bp));
free(pbuf);
}
if (error != 0)
printf("ZFS: i/o error - unable to decompress "
"block pointer data, error %d\n", error);
return (error);
}
error = EIO;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (i = 0; i < SPA_DVAS_PER_BP; i++) {
const dva_t *dva = &bp->blk_dva[i];
vdev_t *vdev;
vdev_list_t *vlist;
uint64_t vdevid;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
off_t offset;
if (!dva->dva_word[0] && !dva->dva_word[1])
continue;
vdevid = DVA_GET_VDEV(dva);
offset = DVA_GET_OFFSET(dva);
vlist = &spa->spa_root_vdev->v_children;
STAILQ_FOREACH(vdev, vlist, v_childlink) {
if (vdev->v_id == vdevid)
break;
}
if (!vdev || !vdev->v_read)
continue;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
size = BP_GET_PSIZE(bp);
if (vdev->v_read == vdev_raidz_read) {
align = 1ULL << vdev->v_ashift;
if (P2PHASE(size, align) != 0)
size = P2ROUNDUP(size, align);
}
if (size != BP_GET_PSIZE(bp) || cpfunc != ZIO_COMPRESS_OFF)
pbuf = malloc(size);
else
pbuf = buf;
if (pbuf == NULL) {
error = ENOMEM;
break;
}
if (DVA_GET_GANG(dva))
error = zio_read_gang(spa, bp, pbuf);
else
error = vdev->v_read(vdev, bp, pbuf, offset, size);
if (error == 0) {
if (cpfunc != ZIO_COMPRESS_OFF)
error = zio_decompress_data(cpfunc, pbuf,
BP_GET_PSIZE(bp), buf, BP_GET_LSIZE(bp));
else if (size != BP_GET_PSIZE(bp))
bcopy(pbuf, buf, BP_GET_PSIZE(bp));
} else {
printf("zio_read error: %d\n", error);
}
if (buf != pbuf)
free(pbuf);
if (error == 0)
break;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
if (error != 0)
printf("ZFS: i/o error - all block copies unavailable\n");
return (error);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
dnode_read(const spa_t *spa, const dnode_phys_t *dnode, off_t offset,
void *buf, size_t buflen)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int ibshift = dnode->dn_indblkshift - SPA_BLKPTRSHIFT;
int bsize = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
int nlevels = dnode->dn_nlevels;
int i, rc;
if (bsize > SPA_MAXBLOCKSIZE) {
printf("ZFS: I/O error - blocks larger than %llu are not "
"supported\n", SPA_MAXBLOCKSIZE);
return (EIO);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Note: bsize may not be a power of two here so we need to do an
* actual divide rather than a bitshift.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
while (buflen > 0) {
uint64_t bn = offset / bsize;
int boff = offset % bsize;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
int ibn;
const blkptr_t *indbp;
blkptr_t bp;
if (bn > dnode->dn_maxblkid)
return (EIO);
if (dnode == dnode_cache_obj && bn == dnode_cache_bn)
goto cached;
indbp = dnode->dn_blkptr;
for (i = 0; i < nlevels; i++) {
/*
* Copy the bp from the indirect array so that
* we can re-use the scratch buffer for multi-level
* objects.
*/
ibn = bn >> ((nlevels - i - 1) * ibshift);
ibn &= ((1 << ibshift) - 1);
bp = indbp[ibn];
if (BP_IS_HOLE(&bp)) {
memset(dnode_cache_buf, 0, bsize);
break;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = zio_read(spa, &bp, dnode_cache_buf);
if (rc)
return (rc);
indbp = (const blkptr_t *) dnode_cache_buf;
}
dnode_cache_obj = dnode;
dnode_cache_bn = bn;
cached:
/*
* The buffer contains our data block. Copy what we
* need from it and loop.
*/
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
i = bsize - boff;
if (i > buflen) i = buflen;
memcpy(buf, &dnode_cache_buf[boff], i);
buf = ((char *)buf) + i;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
offset += i;
buflen -= i;
}
return (0);
}
/*
* Lookup a value in a microzap directory.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
static int
mzap_lookup(const mzap_phys_t *mz, size_t size, const char *name,
uint64_t *value)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
const mzap_ent_phys_t *mze;
int chunks, i;
/*
* Microzap objects use exactly one block. Read the whole
* thing.
*/
chunks = size / MZAP_ENT_LEN - 1;
for (i = 0; i < chunks; i++) {
mze = &mz->mz_chunk[i];
if (strcmp(mze->mze_name, name) == 0) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*value = mze->mze_value;
return (0);
}
}
return (ENOENT);
}
/*
* Compare a name with a zap leaf entry. Return non-zero if the name
* matches.
*/
static int
fzap_name_equal(const zap_leaf_t *zl, const zap_leaf_chunk_t *zc,
const char *name)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
size_t namelen;
const zap_leaf_chunk_t *nc;
const char *p;
namelen = zc->l_entry.le_name_numints;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
nc = &ZAP_LEAF_CHUNK(zl, zc->l_entry.le_name_chunk);
p = name;
while (namelen > 0) {
size_t len;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
len = namelen;
if (len > ZAP_LEAF_ARRAY_BYTES)
len = ZAP_LEAF_ARRAY_BYTES;
if (memcmp(p, nc->l_array.la_array, len))
return (0);
p += len;
namelen -= len;
nc = &ZAP_LEAF_CHUNK(zl, nc->l_array.la_next);
}
return (1);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* Extract a uint64_t value from a zap leaf entry.
*/
static uint64_t
fzap_leaf_value(const zap_leaf_t *zl, const zap_leaf_chunk_t *zc)
{
const zap_leaf_chunk_t *vc;
int i;
uint64_t value;
const uint8_t *p;
vc = &ZAP_LEAF_CHUNK(zl, zc->l_entry.le_value_chunk);
for (i = 0, value = 0, p = vc->l_array.la_array; i < 8; i++) {
value = (value << 8) | p[i];
}
return (value);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static void
stv(int len, void *addr, uint64_t value)
{
switch (len) {
case 1:
*(uint8_t *)addr = value;
return;
case 2:
*(uint16_t *)addr = value;
return;
case 4:
*(uint32_t *)addr = value;
return;
case 8:
*(uint64_t *)addr = value;
return;
}
}
/*
* Extract a array from a zap leaf entry.
*/
static void
fzap_leaf_array(const zap_leaf_t *zl, const zap_leaf_chunk_t *zc,
uint64_t integer_size, uint64_t num_integers, void *buf)
{
uint64_t array_int_len = zc->l_entry.le_value_intlen;
uint64_t value = 0;
uint64_t *u64 = buf;
char *p = buf;
int len = MIN(zc->l_entry.le_value_numints, num_integers);
int chunk = zc->l_entry.le_value_chunk;
int byten = 0;
if (integer_size == 8 && len == 1) {
*u64 = fzap_leaf_value(zl, zc);
return;
}
while (len > 0) {
struct zap_leaf_array *la = &ZAP_LEAF_CHUNK(zl, chunk).l_array;
int i;
ASSERT3U(chunk, <, ZAP_LEAF_NUMCHUNKS(zl));
for (i = 0; i < ZAP_LEAF_ARRAY_BYTES && len > 0; i++) {
value = (value << 8) | la->la_array[i];
byten++;
if (byten == array_int_len) {
stv(integer_size, p, value);
byten = 0;
len--;
if (len == 0)
return;
p += integer_size;
}
}
chunk = la->la_next;
}
}
static int
fzap_check_size(uint64_t integer_size, uint64_t num_integers)
{
switch (integer_size) {
case 1:
case 2:
case 4:
case 8:
break;
default:
return (EINVAL);
}
if (integer_size * num_integers > ZAP_MAXVALUELEN)
return (E2BIG);
return (0);
}
static void
zap_leaf_free(zap_leaf_t *leaf)
{
free(leaf->l_phys);
free(leaf);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
zap_get_leaf_byblk(fat_zap_t *zap, uint64_t blk, zap_leaf_t **lp)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int bs = FZAP_BLOCK_SHIFT(zap);
int err;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*lp = malloc(sizeof(**lp));
if (*lp == NULL)
return (ENOMEM);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
(*lp)->l_bs = bs;
(*lp)->l_phys = malloc(1 << bs);
if ((*lp)->l_phys == NULL) {
free(*lp);
return (ENOMEM);
}
err = dnode_read(zap->zap_spa, zap->zap_dnode, blk << bs, (*lp)->l_phys,
1 << bs);
if (err != 0) {
zap_leaf_free(*lp);
}
return (err);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
zap_table_load(fat_zap_t *zap, zap_table_phys_t *tbl, uint64_t idx,
uint64_t *valp)
{
int bs = FZAP_BLOCK_SHIFT(zap);
uint64_t blk = idx >> (bs - 3);
uint64_t off = idx & ((1 << (bs - 3)) - 1);
uint64_t *buf;
int rc;
buf = malloc(1 << zap->zap_block_shift);
if (buf == NULL)
return (ENOMEM);
rc = dnode_read(zap->zap_spa, zap->zap_dnode, (tbl->zt_blk + blk) << bs,
buf, 1 << zap->zap_block_shift);
if (rc == 0)
*valp = buf[off];
free(buf);
return (rc);
}
static int
zap_idx_to_blk(fat_zap_t *zap, uint64_t idx, uint64_t *valp)
{
if (zap->zap_phys->zap_ptrtbl.zt_numblks == 0) {
*valp = ZAP_EMBEDDED_PTRTBL_ENT(zap, idx);
return (0);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
} else {
return (zap_table_load(zap, &zap->zap_phys->zap_ptrtbl,
idx, valp));
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#define ZAP_HASH_IDX(hash, n) (((n) == 0) ? 0 : ((hash) >> (64 - (n))))
static int
zap_deref_leaf(fat_zap_t *zap, uint64_t h, zap_leaf_t **lp)
{
uint64_t idx, blk;
int err;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
idx = ZAP_HASH_IDX(h, zap->zap_phys->zap_ptrtbl.zt_shift);
err = zap_idx_to_blk(zap, idx, &blk);
if (err != 0)
return (err);
return (zap_get_leaf_byblk(zap, blk, lp));
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
#define CHAIN_END 0xffff /* end of the chunk chain */
#define LEAF_HASH(l, h) \
((ZAP_LEAF_HASH_NUMENTRIES(l)-1) & \
((h) >> \
(64 - ZAP_LEAF_HASH_SHIFT(l) - (l)->l_phys->l_hdr.lh_prefix_len)))
#define LEAF_HASH_ENTPTR(l, h) (&(l)->l_phys->l_hash[LEAF_HASH(l, h)])
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
static int
zap_leaf_lookup(zap_leaf_t *zl, uint64_t hash, const char *name,
uint64_t integer_size, uint64_t num_integers, void *value)
{
int rc;
uint16_t *chunkp;
struct zap_leaf_entry *le;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Make sure this chunk matches our hash.
*/
if (zl->l_phys->l_hdr.lh_prefix_len > 0 &&
zl->l_phys->l_hdr.lh_prefix !=
hash >> (64 - zl->l_phys->l_hdr.lh_prefix_len))
return (EIO);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = ENOENT;
for (chunkp = LEAF_HASH_ENTPTR(zl, hash);
*chunkp != CHAIN_END; chunkp = &le->le_next) {
zap_leaf_chunk_t *zc;
uint16_t chunk = *chunkp;
le = ZAP_LEAF_ENTRY(zl, chunk);
if (le->le_hash != hash)
continue;
zc = &ZAP_LEAF_CHUNK(zl, chunk);
if (fzap_name_equal(zl, zc, name)) {
if (zc->l_entry.le_value_intlen > integer_size) {
rc = EINVAL;
} else {
fzap_leaf_array(zl, zc, integer_size,
num_integers, value);
rc = 0;
}
break;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (rc);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Lookup a value in a fatzap directory.
*/
static int
fzap_lookup(const spa_t *spa, const dnode_phys_t *dnode, zap_phys_t *zh,
const char *name, uint64_t integer_size, uint64_t num_integers,
void *value)
{
int bsize = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
fat_zap_t z;
zap_leaf_t *zl;
uint64_t hash;
int rc;
if (zh->zap_magic != ZAP_MAGIC)
return (EIO);
if ((rc = fzap_check_size(integer_size, num_integers)) != 0) {
return (rc);
}
z.zap_block_shift = ilog2(bsize);
z.zap_phys = zh;
z.zap_spa = spa;
z.zap_dnode = dnode;
hash = zap_hash(zh->zap_salt, name);
rc = zap_deref_leaf(&z, hash, &zl);
if (rc != 0)
return (rc);
rc = zap_leaf_lookup(zl, hash, name, integer_size, num_integers, value);
zap_leaf_free(zl);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* Lookup a name in a zap object and return its value as a uint64_t.
*/
static int
zap_lookup(const spa_t *spa, const dnode_phys_t *dnode, const char *name,
uint64_t integer_size, uint64_t num_integers, void *value)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int rc;
zap_phys_t *zap;
size_t size = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zap = malloc(size);
if (zap == NULL)
return (ENOMEM);
rc = dnode_read(spa, dnode, 0, zap, size);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (rc)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
switch (zap->zap_block_type) {
case ZBT_MICRO:
rc = mzap_lookup((const mzap_phys_t *)zap, size, name, value);
break;
case ZBT_HEADER:
rc = fzap_lookup(spa, dnode, zap, name, integer_size,
num_integers, value);
break;
default:
printf("ZFS: invalid zap_type=%" PRIx64 "\n",
zap->zap_block_type);
rc = EIO;
}
done:
free(zap);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* List a microzap directory.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
static int
mzap_list(const mzap_phys_t *mz, size_t size,
int (*callback)(const char *, uint64_t))
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
const mzap_ent_phys_t *mze;
int chunks, i, rc;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Microzap objects use exactly one block. Read the whole
* thing.
*/
rc = 0;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
chunks = size / MZAP_ENT_LEN - 1;
for (i = 0; i < chunks; i++) {
mze = &mz->mz_chunk[i];
if (mze->mze_name[0]) {
rc = callback(mze->mze_name, mze->mze_value);
if (rc != 0)
break;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
/*
* List a fatzap directory.
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
static int
fzap_list(const spa_t *spa, const dnode_phys_t *dnode, zap_phys_t *zh,
int (*callback)(const char *, uint64_t))
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int bsize = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
fat_zap_t z;
uint64_t i;
int j, rc;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (zh->zap_magic != ZAP_MAGIC)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
z.zap_block_shift = ilog2(bsize);
z.zap_phys = zh;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* This assumes that the leaf blocks start at block 1. The
* documentation isn't exactly clear on this.
*/
zap_leaf_t zl;
zl.l_bs = z.zap_block_shift;
zl.l_phys = malloc(bsize);
if (zl.l_phys == NULL)
return (ENOMEM);
for (i = 0; i < zh->zap_num_leafs; i++) {
off_t off = ((off_t)(i + 1)) << zl.l_bs;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
char name[256], *p;
uint64_t value;
if (dnode_read(spa, dnode, off, zl.l_phys, bsize)) {
free(zl.l_phys);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
for (j = 0; j < ZAP_LEAF_NUMCHUNKS(&zl); j++) {
zap_leaf_chunk_t *zc, *nc;
int namelen;
zc = &ZAP_LEAF_CHUNK(&zl, j);
if (zc->l_entry.le_type != ZAP_CHUNK_ENTRY)
continue;
namelen = zc->l_entry.le_name_numints;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (namelen > sizeof(name))
namelen = sizeof(name);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Paste the name back together.
*/
nc = &ZAP_LEAF_CHUNK(&zl, zc->l_entry.le_name_chunk);
p = name;
while (namelen > 0) {
int len;
len = namelen;
if (len > ZAP_LEAF_ARRAY_BYTES)
len = ZAP_LEAF_ARRAY_BYTES;
memcpy(p, nc->l_array.la_array, len);
p += len;
namelen -= len;
nc = &ZAP_LEAF_CHUNK(&zl, nc->l_array.la_next);
}
/*
* Assume the first eight bytes of the value are
* a uint64_t.
*/
value = fzap_leaf_value(&zl, zc);
/* printf("%s 0x%jx\n", name, (uintmax_t)value); */
rc = callback((const char *)name, value);
if (rc != 0) {
free(zl.l_phys);
return (rc);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
}
free(zl.l_phys);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (0);
}
static int zfs_printf(const char *name, uint64_t value __unused)
{
printf("%s\n", name);
return (0);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* List a zap directory.
*/
static int
zap_list(const spa_t *spa, const dnode_phys_t *dnode)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
zap_phys_t *zap;
size_t size = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
int rc;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zap = malloc(size);
if (zap == NULL)
return (ENOMEM);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = dnode_read(spa, dnode, 0, zap, size);
if (rc == 0) {
if (zap->zap_block_type == ZBT_MICRO)
rc = mzap_list((const mzap_phys_t *)zap, size,
zfs_printf);
else
rc = fzap_list(spa, dnode, zap, zfs_printf);
}
free(zap);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
objset_get_dnode(const spa_t *spa, const objset_phys_t *os, uint64_t objnum,
dnode_phys_t *dnode)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
off_t offset;
offset = objnum * sizeof(dnode_phys_t);
return dnode_read(spa, &os->os_meta_dnode, offset,
dnode, sizeof(dnode_phys_t));
}
/*
* Lookup a name in a microzap directory.
*/
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
static int
mzap_rlookup(const mzap_phys_t *mz, size_t size, char *name, uint64_t value)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
const mzap_ent_phys_t *mze;
int chunks, i;
/*
* Microzap objects use exactly one block. Read the whole
* thing.
*/
chunks = size / MZAP_ENT_LEN - 1;
for (i = 0; i < chunks; i++) {
mze = &mz->mz_chunk[i];
if (value == mze->mze_value) {
strcpy(name, mze->mze_name);
return (0);
}
}
return (ENOENT);
}
static void
fzap_name_copy(const zap_leaf_t *zl, const zap_leaf_chunk_t *zc, char *name)
{
size_t namelen;
const zap_leaf_chunk_t *nc;
char *p;
namelen = zc->l_entry.le_name_numints;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
nc = &ZAP_LEAF_CHUNK(zl, zc->l_entry.le_name_chunk);
p = name;
while (namelen > 0) {
size_t len;
len = namelen;
if (len > ZAP_LEAF_ARRAY_BYTES)
len = ZAP_LEAF_ARRAY_BYTES;
memcpy(p, nc->l_array.la_array, len);
p += len;
namelen -= len;
nc = &ZAP_LEAF_CHUNK(zl, nc->l_array.la_next);
}
*p = '\0';
}
static int
fzap_rlookup(const spa_t *spa, const dnode_phys_t *dnode, zap_phys_t *zh,
char *name, uint64_t value)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
int bsize = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
fat_zap_t z;
uint64_t i;
int j, rc;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (zh->zap_magic != ZAP_MAGIC)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
z.zap_block_shift = ilog2(bsize);
z.zap_phys = zh;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
/*
* This assumes that the leaf blocks start at block 1. The
* documentation isn't exactly clear on this.
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
*/
zap_leaf_t zl;
zl.l_bs = z.zap_block_shift;
zl.l_phys = malloc(bsize);
if (zl.l_phys == NULL)
return (ENOMEM);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
for (i = 0; i < zh->zap_num_leafs; i++) {
off_t off = ((off_t)(i + 1)) << zl.l_bs;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
rc = dnode_read(spa, dnode, off, zl.l_phys, bsize);
if (rc != 0)
goto done;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
for (j = 0; j < ZAP_LEAF_NUMCHUNKS(&zl); j++) {
zap_leaf_chunk_t *zc;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
zc = &ZAP_LEAF_CHUNK(&zl, j);
if (zc->l_entry.le_type != ZAP_CHUNK_ENTRY)
continue;
if (zc->l_entry.le_value_intlen != 8 ||
zc->l_entry.le_value_numints != 1)
continue;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (fzap_leaf_value(&zl, zc) == value) {
fzap_name_copy(&zl, zc, name);
goto done;
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
}
}
rc = ENOENT;
done:
free(zl.l_phys);
return (rc);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
}
static int
zap_rlookup(const spa_t *spa, const dnode_phys_t *dnode, char *name,
uint64_t value)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
zap_phys_t *zap;
size_t size = dnode->dn_datablkszsec << SPA_MINBLOCKSHIFT;
int rc;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
zap = malloc(size);
if (zap == NULL)
return (ENOMEM);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
rc = dnode_read(spa, dnode, 0, zap, size);
if (rc == 0) {
if (zap->zap_block_type == ZBT_MICRO)
rc = mzap_rlookup((const mzap_phys_t *)zap, size,
name, value);
else
rc = fzap_rlookup(spa, dnode, zap, name, value);
}
free(zap);
return (rc);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
}
static int
zfs_rlookup(const spa_t *spa, uint64_t objnum, char *result)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
char name[256];
char component[256];
uint64_t dir_obj, parent_obj, child_dir_zapobj;
dnode_phys_t child_dir_zap, dataset, dir, parent;
dsl_dir_phys_t *dd;
dsl_dataset_phys_t *ds;
char *p;
int len;
p = &name[sizeof(name) - 1];
*p = '\0';
if (objset_get_dnode(spa, spa->spa_mos, objnum, &dataset)) {
printf("ZFS: can't find dataset %ju\n", (uintmax_t)objnum);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
}
ds = (dsl_dataset_phys_t *)&dataset.dn_bonus;
dir_obj = ds->ds_dir_obj;
for (;;) {
if (objset_get_dnode(spa, spa->spa_mos, dir_obj, &dir) != 0)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
dd = (dsl_dir_phys_t *)&dir.dn_bonus;
/* Actual loop condition. */
parent_obj = dd->dd_parent_obj;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (parent_obj == 0)
break;
if (objset_get_dnode(spa, spa->spa_mos, parent_obj,
&parent) != 0)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
dd = (dsl_dir_phys_t *)&parent.dn_bonus;
child_dir_zapobj = dd->dd_child_dir_zapobj;
if (objset_get_dnode(spa, spa->spa_mos, child_dir_zapobj,
&child_dir_zap) != 0)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
if (zap_rlookup(spa, &child_dir_zap, component, dir_obj) != 0)
return (EIO);
len = strlen(component);
p -= len;
memcpy(p, component, len);
--p;
*p = '/';
/* Actual loop iteration. */
dir_obj = parent_obj;
}
if (*p != '\0')
++p;
strcpy(result, p);
return (0);
}
static int
zfs_lookup_dataset(const spa_t *spa, const char *name, uint64_t *objnum)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
char element[256];
uint64_t dir_obj, child_dir_zapobj;
dnode_phys_t child_dir_zap, dir;
dsl_dir_phys_t *dd;
const char *p, *q;
if (objset_get_dnode(spa, spa->spa_mos,
DMU_POOL_DIRECTORY_OBJECT, &dir))
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
if (zap_lookup(spa, &dir, DMU_POOL_ROOT_DATASET, sizeof (dir_obj),
1, &dir_obj))
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
p = name;
for (;;) {
if (objset_get_dnode(spa, spa->spa_mos, dir_obj, &dir))
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
dd = (dsl_dir_phys_t *)&dir.dn_bonus;
while (*p == '/')
p++;
/* Actual loop condition #1. */
if (*p == '\0')
break;
q = strchr(p, '/');
if (q) {
memcpy(element, p, q - p);
element[q - p] = '\0';
p = q + 1;
} else {
strcpy(element, p);
p += strlen(p);
}
child_dir_zapobj = dd->dd_child_dir_zapobj;
if (objset_get_dnode(spa, spa->spa_mos, child_dir_zapobj,
&child_dir_zap) != 0)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (EIO);
/* Actual loop condition #2. */
if (zap_lookup(spa, &child_dir_zap, element, sizeof (dir_obj),
1, &dir_obj) != 0)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
return (ENOENT);
}
*objnum = dd->dd_head_dataset_obj;
return (0);
}
#ifndef BOOT2
static int
zfs_list_dataset(const spa_t *spa, uint64_t objnum/*, int pos, char *entry*/)
{
uint64_t dir_obj, child_dir_zapobj;
dnode_phys_t child_dir_zap, dir, dataset;
dsl_dataset_phys_t *ds;
dsl_dir_phys_t *dd;
if (objset_get_dnode(spa, spa->spa_mos, objnum, &dataset)) {
printf("ZFS: can't find dataset %ju\n", (uintmax_t)objnum);
return (EIO);
}
ds = (dsl_dataset_phys_t *)&dataset.dn_bonus;
dir_obj = ds->ds_dir_obj;
if (objset_get_dnode(spa, spa->spa_mos, dir_obj, &dir)) {
printf("ZFS: can't find dirobj %ju\n", (uintmax_t)dir_obj);
return (EIO);
}
dd = (dsl_dir_phys_t *)&dir.dn_bonus;
child_dir_zapobj = dd->dd_child_dir_zapobj;
if (objset_get_dnode(spa, spa->spa_mos, child_dir_zapobj,
&child_dir_zap) != 0) {
printf("ZFS: can't find child zap %ju\n", (uintmax_t)dir_obj);
return (EIO);
}
return (zap_list(spa, &child_dir_zap) != 0);
}
int
zfs_callback_dataset(const spa_t *spa, uint64_t objnum,
int (*callback)(const char *, uint64_t))
{
uint64_t dir_obj, child_dir_zapobj;
dnode_phys_t child_dir_zap, dir, dataset;
dsl_dataset_phys_t *ds;
dsl_dir_phys_t *dd;
zap_phys_t *zap;
size_t size;
int err;
err = objset_get_dnode(spa, spa->spa_mos, objnum, &dataset);
if (err != 0) {
printf("ZFS: can't find dataset %ju\n", (uintmax_t)objnum);
return (err);
}
ds = (dsl_dataset_phys_t *)&dataset.dn_bonus;
dir_obj = ds->ds_dir_obj;
err = objset_get_dnode(spa, spa->spa_mos, dir_obj, &dir);
if (err != 0) {
printf("ZFS: can't find dirobj %ju\n", (uintmax_t)dir_obj);
return (err);
}
dd = (dsl_dir_phys_t *)&dir.dn_bonus;
child_dir_zapobj = dd->dd_child_dir_zapobj;
err = objset_get_dnode(spa, spa->spa_mos, child_dir_zapobj,
&child_dir_zap);
if (err != 0) {
printf("ZFS: can't find child zap %ju\n", (uintmax_t)dir_obj);
return (err);
}
size = child_dir_zap.dn_datablkszsec << SPA_MINBLOCKSHIFT;
zap = malloc(size);
if (zap != NULL) {
err = dnode_read(spa, &child_dir_zap, 0, zap, size);
if (err != 0)
goto done;
if (zap->zap_block_type == ZBT_MICRO)
err = mzap_list((const mzap_phys_t *)zap, size,
callback);
else
err = fzap_list(spa, &child_dir_zap, zap, callback);
} else {
err = ENOMEM;
}
done:
free(zap);
return (err);
}
#endif
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Find the object set given the object number of its dataset object
* and return its details in *objset
*/
static int
zfs_mount_dataset(const spa_t *spa, uint64_t objnum, objset_phys_t *objset)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
dnode_phys_t dataset;
dsl_dataset_phys_t *ds;
if (objset_get_dnode(spa, spa->spa_mos, objnum, &dataset)) {
printf("ZFS: can't find dataset %ju\n", (uintmax_t)objnum);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
ds = (dsl_dataset_phys_t *)&dataset.dn_bonus;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (zio_read(spa, &ds->ds_bp, objset)) {
printf("ZFS: can't read object set for dataset %ju\n",
(uintmax_t)objnum);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
return (0);
}
/*
* Find the object set pointed to by the BOOTFS property or the root
* dataset if there is none and return its details in *objset
*/
static int
zfs_get_root(const spa_t *spa, uint64_t *objid)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
dnode_phys_t dir, propdir;
uint64_t props, bootfs, root;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
*objid = 0;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Start with the MOS directory object.
*/
if (objset_get_dnode(spa, spa->spa_mos,
DMU_POOL_DIRECTORY_OBJECT, &dir)) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
printf("ZFS: can't read MOS object directory\n");
return (EIO);
}
/*
* Lookup the pool_props and see if we can find a bootfs.
*/
if (zap_lookup(spa, &dir, DMU_POOL_PROPS,
sizeof(props), 1, &props) == 0 &&
objset_get_dnode(spa, spa->spa_mos, props, &propdir) == 0 &&
zap_lookup(spa, &propdir, "bootfs",
sizeof(bootfs), 1, &bootfs) == 0 && bootfs != 0) {
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
*objid = bootfs;
return (0);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Lookup the root dataset directory
*/
if (zap_lookup(spa, &dir, DMU_POOL_ROOT_DATASET,
sizeof(root), 1, &root) ||
objset_get_dnode(spa, spa->spa_mos, root, &dir)) {
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
printf("ZFS: can't find root dsl_dir\n");
return (EIO);
}
/*
* Use the information from the dataset directory's bonus buffer
* to find the dataset object and from that the object set itself.
*/
dsl_dir_phys_t *dd = (dsl_dir_phys_t *)&dir.dn_bonus;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
*objid = dd->dd_head_dataset_obj;
return (0);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
zfs_mount(const spa_t *spa, uint64_t rootobj, struct zfsmount *mount)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
mount->spa = spa;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
* Find the root object set if not explicitly provided
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
*/
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (rootobj == 0 && zfs_get_root(spa, &rootobj)) {
printf("ZFS: can't find root filesystem\n");
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (zfs_mount_dataset(spa, rootobj, &mount->objset)) {
printf("ZFS: can't open root filesystem\n");
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
mount->rootobj = rootobj;
return (0);
}
/*
* callback function for feature name checks.
*/
static int
check_feature(const char *name, uint64_t value)
{
int i;
if (value == 0)
return (0);
if (name[0] == '\0')
return (0);
for (i = 0; features_for_read[i] != NULL; i++) {
if (strcmp(name, features_for_read[i]) == 0)
return (0);
}
printf("ZFS: unsupported feature: %s\n", name);
return (EIO);
}
/*
* Checks whether the MOS features that are active are supported.
*/
static int
check_mos_features(const spa_t *spa)
{
dnode_phys_t dir;
zap_phys_t *zap;
uint64_t objnum;
size_t size;
int rc;
if ((rc = objset_get_dnode(spa, spa->spa_mos, DMU_OT_OBJECT_DIRECTORY,
&dir)) != 0)
return (rc);
if ((rc = zap_lookup(spa, &dir, DMU_POOL_FEATURES_FOR_READ,
sizeof (objnum), 1, &objnum)) != 0) {
/*
* It is older pool without features. As we have already
* tested the label, just return without raising the error.
*/
return (0);
}
if ((rc = objset_get_dnode(spa, spa->spa_mos, objnum, &dir)) != 0)
return (rc);
if (dir.dn_type != DMU_OTN_ZAP_METADATA)
return (EIO);
size = dir.dn_datablkszsec << SPA_MINBLOCKSHIFT;
zap = malloc(size);
if (zap == NULL)
return (ENOMEM);
if (dnode_read(spa, &dir, 0, zap, size)) {
free(zap);
return (EIO);
}
if (zap->zap_block_type == ZBT_MICRO)
rc = mzap_list((const mzap_phys_t *)zap, size, check_feature);
else
rc = fzap_list(spa, &dir, zap, check_feature);
free(zap);
return (rc);
}
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
static int
load_nvlist(spa_t *spa, uint64_t obj, nvlist_t **value)
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
{
dnode_phys_t dir;
size_t size;
int rc;
char *nv;
*value = NULL;
if ((rc = objset_get_dnode(spa, spa->spa_mos, obj, &dir)) != 0)
return (rc);
if (dir.dn_type != DMU_OT_PACKED_NVLIST &&
dir.dn_bonustype != DMU_OT_PACKED_NVLIST_SIZE) {
return (EIO);
}
if (dir.dn_bonuslen != sizeof (uint64_t))
return (EIO);
size = *(uint64_t *)DN_BONUS(&dir);
nv = malloc(size);
if (nv == NULL)
return (ENOMEM);
rc = dnode_read(spa, &dir, 0, nv, size);
if (rc != 0) {
free(nv);
nv = NULL;
return (rc);
}
*value = nvlist_import(nv, size);
free(nv);
return (rc);
}
static int
zfs_spa_init(spa_t *spa)
{
struct uberblock checkpoint;
dnode_phys_t dir;
uint64_t config_object;
nvlist_t *nvlist;
int rc;
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
if (zio_read(spa, &spa->spa_uberblock->ub_rootbp, spa->spa_mos)) {
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
printf("ZFS: can't read MOS of pool %s\n", spa->spa_name);
return (EIO);
}
if (spa->spa_mos->os_type != DMU_OST_META) {
printf("ZFS: corrupted MOS of pool %s\n", spa->spa_name);
return (EIO);
}
if (objset_get_dnode(spa, &spa->spa_mos_master,
DMU_POOL_DIRECTORY_OBJECT, &dir)) {
printf("ZFS: failed to read pool %s directory object\n",
spa->spa_name);
return (EIO);
}
/* this is allowed to fail, older pools do not have salt */
rc = zap_lookup(spa, &dir, DMU_POOL_CHECKSUM_SALT, 1,
sizeof (spa->spa_cksum_salt.zcs_bytes),
spa->spa_cksum_salt.zcs_bytes);
rc = check_mos_features(spa);
if (rc != 0) {
printf("ZFS: pool %s is not supported\n", spa->spa_name);
return (rc);
}
rc = zap_lookup(spa, &dir, DMU_POOL_CONFIG,
sizeof (config_object), 1, &config_object);
if (rc != 0) {
printf("ZFS: can not read MOS %s\n", DMU_POOL_CONFIG);
return (EIO);
}
rc = load_nvlist(spa, config_object, &nvlist);
if (rc != 0)
return (rc);
rc = zap_lookup(spa, &dir, DMU_POOL_ZPOOL_CHECKPOINT,
sizeof(uint64_t), sizeof(checkpoint) / sizeof(uint64_t),
&checkpoint);
if (rc == 0 && checkpoint.ub_checkpoint_txg != 0) {
memcpy(&spa->spa_uberblock_checkpoint, &checkpoint,
sizeof(checkpoint));
if (zio_read(spa, &spa->spa_uberblock_checkpoint.ub_rootbp,
&spa->spa_mos_checkpoint)) {
printf("ZFS: can not read checkpoint data.\n");
return (EIO);
}
}
/*
* Update vdevs from MOS config. Note, we do skip encoding bytes
* here. See also vdev_label_read_config().
*/
rc = vdev_init_from_nvlist(spa, nvlist);
nvlist_destroy(nvlist);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
static int
zfs_dnode_stat(const spa_t *spa, dnode_phys_t *dn, struct stat *sb)
{
if (dn->dn_bonustype != DMU_OT_SA) {
znode_phys_t *zp = (znode_phys_t *)dn->dn_bonus;
sb->st_mode = zp->zp_mode;
sb->st_uid = zp->zp_uid;
sb->st_gid = zp->zp_gid;
sb->st_size = zp->zp_size;
} else {
sa_hdr_phys_t *sahdrp;
int hdrsize;
size_t size = 0;
void *buf = NULL;
if (dn->dn_bonuslen != 0)
sahdrp = (sa_hdr_phys_t *)DN_BONUS(dn);
else {
if ((dn->dn_flags & DNODE_FLAG_SPILL_BLKPTR) != 0) {
blkptr_t *bp = DN_SPILL_BLKPTR(dn);
int error;
size = BP_GET_LSIZE(bp);
buf = malloc(size);
if (buf == NULL)
error = ENOMEM;
else
error = zio_read(spa, bp, buf);
if (error != 0) {
free(buf);
return (error);
}
sahdrp = buf;
} else {
return (EIO);
}
}
hdrsize = SA_HDR_SIZE(sahdrp);
sb->st_mode = *(uint64_t *)((char *)sahdrp + hdrsize +
SA_MODE_OFFSET);
sb->st_uid = *(uint64_t *)((char *)sahdrp + hdrsize +
SA_UID_OFFSET);
sb->st_gid = *(uint64_t *)((char *)sahdrp + hdrsize +
SA_GID_OFFSET);
sb->st_size = *(uint64_t *)((char *)sahdrp + hdrsize +
SA_SIZE_OFFSET);
free(buf);
}
return (0);
}
static int
zfs_dnode_readlink(const spa_t *spa, dnode_phys_t *dn, char *path, size_t psize)
{
int rc = 0;
if (dn->dn_bonustype == DMU_OT_SA) {
sa_hdr_phys_t *sahdrp = NULL;
size_t size = 0;
void *buf = NULL;
int hdrsize;
char *p;
if (dn->dn_bonuslen != 0) {
sahdrp = (sa_hdr_phys_t *)DN_BONUS(dn);
} else {
blkptr_t *bp;
if ((dn->dn_flags & DNODE_FLAG_SPILL_BLKPTR) == 0)
return (EIO);
bp = DN_SPILL_BLKPTR(dn);
size = BP_GET_LSIZE(bp);
buf = malloc(size);
if (buf == NULL)
rc = ENOMEM;
else
rc = zio_read(spa, bp, buf);
if (rc != 0) {
free(buf);
return (rc);
}
sahdrp = buf;
}
hdrsize = SA_HDR_SIZE(sahdrp);
p = (char *)((uintptr_t)sahdrp + hdrsize + SA_SYMLINK_OFFSET);
memcpy(path, p, psize);
free(buf);
return (0);
}
/*
* Second test is purely to silence bogus compiler
* warning about accessing past the end of dn_bonus.
*/
if (psize + sizeof(znode_phys_t) <= dn->dn_bonuslen &&
sizeof(znode_phys_t) <= sizeof(dn->dn_bonus)) {
memcpy(path, &dn->dn_bonus[sizeof(znode_phys_t)], psize);
} else {
rc = dnode_read(spa, dn, 0, path, psize);
}
return (rc);
}
struct obj_list {
uint64_t objnum;
STAILQ_ENTRY(obj_list) entry;
};
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Lookup a file and return its dnode.
*/
static int
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
zfs_lookup(const struct zfsmount *mount, const char *upath, dnode_phys_t *dnode)
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
{
int rc;
uint64_t objnum;
const spa_t *spa;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
dnode_phys_t dn;
const char *p, *q;
char element[256];
char path[1024];
int symlinks_followed = 0;
struct stat sb;
struct obj_list *entry, *tentry;
STAILQ_HEAD(, obj_list) on_cache = STAILQ_HEAD_INITIALIZER(on_cache);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
spa = mount->spa;
if (mount->objset.os_type != DMU_OST_ZFS) {
printf("ZFS: unexpected object set type %ju\n",
(uintmax_t)mount->objset.os_type);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (EIO);
}
if ((entry = malloc(sizeof(struct obj_list))) == NULL)
return (ENOMEM);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Get the root directory dnode.
*/
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
rc = objset_get_dnode(spa, &mount->objset, MASTER_NODE_OBJ, &dn);
if (rc) {
free(entry);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (rc);
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = zap_lookup(spa, &dn, ZFS_ROOT_OBJ, sizeof(objnum), 1, &objnum);
if (rc) {
free(entry);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
return (rc);
}
entry->objnum = objnum;
STAILQ_INSERT_HEAD(&on_cache, entry, entry);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = objset_get_dnode(spa, &mount->objset, objnum, &dn);
if (rc != 0)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
p = upath;
while (p && *p) {
rc = objset_get_dnode(spa, &mount->objset, objnum, &dn);
if (rc != 0)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
while (*p == '/')
p++;
if (*p == '\0')
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
break;
q = p;
while (*q != '\0' && *q != '/')
q++;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/* skip dot */
if (p + 1 == q && p[0] == '.') {
p++;
continue;
}
/* double dot */
if (p + 2 == q && p[0] == '.' && p[1] == '.') {
p += 2;
if (STAILQ_FIRST(&on_cache) ==
STAILQ_LAST(&on_cache, obj_list, entry)) {
rc = ENOENT;
goto done;
}
entry = STAILQ_FIRST(&on_cache);
STAILQ_REMOVE_HEAD(&on_cache, entry);
free(entry);
objnum = (STAILQ_FIRST(&on_cache))->objnum;
continue;
}
if (q - p + 1 > sizeof(element)) {
rc = ENAMETOOLONG;
goto done;
}
memcpy(element, p, q - p);
element[q - p] = 0;
p = q;
if ((rc = zfs_dnode_stat(spa, &dn, &sb)) != 0)
goto done;
if (!S_ISDIR(sb.st_mode)) {
rc = ENOTDIR;
goto done;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
rc = zap_lookup(spa, &dn, element, sizeof (objnum), 1, &objnum);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (rc)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
objnum = ZFS_DIRENT_OBJ(objnum);
if ((entry = malloc(sizeof(struct obj_list))) == NULL) {
rc = ENOMEM;
goto done;
}
entry->objnum = objnum;
STAILQ_INSERT_HEAD(&on_cache, entry, entry);
zfsboot/zfsloader: support accessing filesystems within a pool In zfs loader zfs device name format now is "zfs:pool/fs", fully qualified file path is "zfs:pool/fs:/path/to/file" loader allows accessing files from various pools and filesystems as well as changing currdev to a different pool/filesystem. zfsboot accepts kernel/loader name in a format pool:fs:path/to/file or, as before, pool:path/to/file; in the latter case a default filesystem is used (pool root or bootfs). zfsboot passes guids of the selected pool and dataset to zfsloader to be used as its defaults. zfs support should be architecture independent and is provided in a separate library, but architectures wishing to use this zfs support still have to provide some glue code and their devdesc should be compatible with zfs_devdesc. arch_zfs_probe method is used to discover all disk devices that may be part of ZFS pool(s). libi386 unconditionally includes zfs support, but some zfs-specific functions are stubbed out as weak symbols. The strong definitions are provided in libzfsboot. This change mean that the size of i386_devspec becomes larger to match zfs_devspec. Backward-compatibility shims are provided for recently added sparc64 zfs boot support. Currently that architecture still works the old way and does not support the new features. TODO: - clear up pool root filesystem vs pool bootfs filesystem distinction - update sparc64 support - set vfs.root.mountfrom based on currdev (for zfs) Mid-future TODO: - loader sub-menu for selecting alternative boot environment Distant future TODO: - support accessing snapshots, using a snapshot as readonly root Reviewed by: marius (sparc64), Gavin Mu <gavin.mu@gmail.com> (sparc64) Tested by: Florian Wagner <florian@wagner-flo.net> (x86), marius (sparc64) No objections: fs@, hackers@ MFC after: 1 month
2012-05-12 09:03:30 +00:00
rc = objset_get_dnode(spa, &mount->objset, objnum, &dn);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
if (rc)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Check for symlink.
*/
rc = zfs_dnode_stat(spa, &dn, &sb);
if (rc)
goto done;
if (S_ISLNK(sb.st_mode)) {
if (symlinks_followed > 10) {
rc = EMLINK;
goto done;
}
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
symlinks_followed++;
/*
* Read the link value and copy the tail of our
* current path onto the end.
*/
if (sb.st_size + strlen(p) + 1 > sizeof(path)) {
rc = ENAMETOOLONG;
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
strcpy(&path[sb.st_size], p);
rc = zfs_dnode_readlink(spa, &dn, path, sb.st_size);
if (rc != 0)
goto done;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* Restart with the new path, starting either at
* the root or at the parent depending whether or
* not the link is relative.
*/
p = path;
if (*p == '/') {
while (STAILQ_FIRST(&on_cache) !=
STAILQ_LAST(&on_cache, obj_list, entry)) {
entry = STAILQ_FIRST(&on_cache);
STAILQ_REMOVE_HEAD(&on_cache, entry);
free(entry);
}
} else {
entry = STAILQ_FIRST(&on_cache);
STAILQ_REMOVE_HEAD(&on_cache, entry);
free(entry);
}
objnum = (STAILQ_FIRST(&on_cache))->objnum;
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}
}
*dnode = dn;
done:
STAILQ_FOREACH_SAFE(entry, &on_cache, entry, tentry)
free(entry);
return (rc);
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
}