freebsd-dev/sys/isa/syscons_isa.c

311 lines
7.1 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Kazutaka YOKOTA <yokota@zodiac.mech.utsunomiya-u.ac.jp>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
2003-06-11 00:34:37 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_syscons.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/cons.h>
#include <sys/kbio.h>
#include <sys/consio.h>
#include <sys/sysctl.h>
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#if defined(__i386__) || defined(__amd64__)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#include <machine/clock.h>
#include <machine/md_var.h>
#include <machine/ppireg.h>
#include <machine/timerreg.h>
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#include <machine/pc/bios.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <vm/vm_param.h>
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
#define BIOS_CLKED (1 << 6)
#define BIOS_NLKED (1 << 5)
#define BIOS_SLKED (1 << 4)
#define BIOS_ALKED 0
#endif
#include <dev/syscons/syscons.h>
#include <isa/isavar.h>
#include "opt_xbox.h"
#ifdef XBOX
#include <machine/xbox.h>
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static devclass_t sc_devclass;
static sc_softc_t main_softc;
#ifdef SC_NO_SUSPEND_VTYSWITCH
static int sc_no_suspend_vtswitch = 1;
#else
static int sc_no_suspend_vtswitch = 0;
#endif
static int sc_cur_scr;
TUNABLE_INT("hw.syscons.sc_no_suspend_vtswitch", (int *)&sc_no_suspend_vtswitch);
SYSCTL_DECL(_hw_syscons);
SYSCTL_INT(_hw_syscons, OID_AUTO, sc_no_suspend_vtswitch, CTLFLAG_RW,
&sc_no_suspend_vtswitch, 0, "Disable VT switch before suspend.");
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
static void
scidentify (driver_t *driver, device_t parent)
{
BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "sc", 0);
}
static int
scprobe(device_t dev)
{
1999-05-30 11:12:30 +00:00
/* No pnp support */
if (isa_get_vendorid(dev))
return (ENXIO);
device_set_desc(dev, "System console");
return sc_probe_unit(device_get_unit(dev), device_get_flags(dev));
}
static int
scattach(device_t dev)
{
return sc_attach_unit(device_get_unit(dev), device_get_flags(dev));
}
static int
scsuspend(device_t dev)
{
int retry = 10;
static int dummy;
sc_softc_t *sc;
sc = &main_softc;
if (sc->cur_scp == NULL)
return (0);
sc_cur_scr = sc->cur_scp->index;
if (sc_no_suspend_vtswitch)
return (0);
do {
sc_switch_scr(sc, 0);
if (!sc->switch_in_progress) {
break;
}
tsleep(&dummy, 0, "scsuspend", 100);
} while (retry--);
return (0);
}
static int
scresume(device_t dev)
{
sc_softc_t *sc;
if (sc_no_suspend_vtswitch)
return (0);
sc = &main_softc;
sc_switch_scr(sc, sc_cur_scr);
return (0);
}
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int
sc_max_unit(void)
{
return devclass_get_maxunit(sc_devclass);
}
sc_softc_t
*sc_get_softc(int unit, int flags)
{
sc_softc_t *sc;
if (unit < 0)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return NULL;
if (flags & SC_KERNEL_CONSOLE) {
/* FIXME: clear if it is wired to another unit! */
sc = &main_softc;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else {
sc = (sc_softc_t *)device_get_softc(devclass_get_device(sc_devclass, unit));
if (sc == NULL)
return NULL;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
sc->unit = unit;
if (!(sc->flags & SC_INIT_DONE)) {
sc->keyboard = -1;
sc->adapter = -1;
sc->cursor_char = SC_CURSOR_CHAR;
sc->mouse_char = SC_MOUSE_CHAR;
}
return sc;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
sc_softc_t
*sc_find_softc(struct video_adapter *adp, struct keyboard *kbd)
{
sc_softc_t *sc;
int units;
int i;
sc = &main_softc;
if (((adp == NULL) || (adp == sc->adp))
&& ((kbd == NULL) || (kbd == sc->kbd)))
return sc;
units = devclass_get_maxunit(sc_devclass);
for (i = 0; i < units; ++i) {
sc = (sc_softc_t *)device_get_softc(devclass_get_device(sc_devclass, i));
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (sc == NULL)
continue;
if (((adp == NULL) || (adp == sc->adp))
&& ((kbd == NULL) || (kbd == sc->kbd)))
return sc;
}
return NULL;
}
int
sc_get_cons_priority(int *unit, int *flags)
{
const char *at;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
int u, f;
#ifdef XBOX
/*
* The XBox Loader does not support hints, which makes our initial
* console probe fail. Therefore, if an XBox is found, we hardcode the
* existence of the console, as it is always there anyway.
*/
if (arch_i386_is_xbox) {
*unit = 0;
*flags = SC_KERNEL_CONSOLE;
return CN_INTERNAL;
}
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
*unit = -1;
for (u = 0; u < 16; u++) {
if (resource_disabled(SC_DRIVER_NAME, u))
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
continue;
if (resource_string_value(SC_DRIVER_NAME, u, "at", &at) != 0)
continue;
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (resource_int_value(SC_DRIVER_NAME, u, "flags", &f) != 0)
f = 0;
if (f & SC_KERNEL_CONSOLE) {
/* the user designates this unit to be the console */
*unit = u;
*flags = f;
break;
}
if (*unit < 0) {
/* ...otherwise remember the first found unit */
*unit = u;
*flags = f;
}
}
if (*unit < 0)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return CN_DEAD;
#if 0
return ((*flags & SC_KERNEL_CONSOLE) ? CN_INTERNAL : CN_NORMAL);
#endif
return CN_INTERNAL;
}
void
sc_get_bios_values(bios_values_t *values)
{
#if defined(__i386__) || defined(__amd64__)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
u_int8_t shift;
values->cursor_start = *(u_int8_t *)BIOS_PADDRTOVADDR(0x461);
values->cursor_end = *(u_int8_t *)BIOS_PADDRTOVADDR(0x460);
shift = *(u_int8_t *)BIOS_PADDRTOVADDR(0x417);
values->shift_state = ((shift & BIOS_CLKED) ? CLKED : 0)
| ((shift & BIOS_NLKED) ? NLKED : 0)
| ((shift & BIOS_SLKED) ? SLKED : 0)
| ((shift & BIOS_ALKED) ? ALKED : 0);
#else
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
values->cursor_start = 0;
values->cursor_end = 32;
values->shift_state = 0;
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
values->bell_pitch = BELL_PITCH;
}
int
sc_tone(int herz)
{
#if defined(__i386__) || defined(__amd64__)
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
if (herz) {
/* set command for counter 2, 2 byte write */
if (timer_spkr_acquire())
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return EBUSY;
/* set pitch */
spkr_set_pitch(timer_freq / herz);
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
/* enable counter 2 output to speaker */
ppi_spkr_on();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
} else {
/* disable counter 2 output to speaker */
ppi_spkr_off();
timer_spkr_release();
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
}
#endif
The second phase of syscons reorganization. - Split syscons source code into manageable chunks and reorganize some of complicated functions. - Many static variables are moved to the softc structure. - Added a new key function, PREV. When this key is pressed, the vty immediately before the current vty will become foreground. Analogue to PREV, which is usually assigned to the PrntScrn key. PR: kern/10113 Submitted by: Christian Weisgerber <naddy@mips.rhein-neckar.de> - Modified the kernel console input function sccngetc() so that it handles function keys properly. - Reorganized the screen update routine. - VT switching code is reorganized. It now should be slightly more robust than before. - Added the DEVICE_RESUME function so that syscons no longer hooks the APM resume event directly. - New kernel configuration options: SC_NO_CUTPASTE, SC_NO_FONT_LOADING, SC_NO_HISTORY and SC_NO_SYSMOUSE. Various parts of syscons can be omitted so that the kernel size is reduced. SC_PIXEL_MODE Made the VESA 800x600 mode an option, rather than a standard part of syscons. SC_DISABLE_DDBKEY Disables the `debug' key combination. SC_ALT_MOUSE_IMAGE Inverse the character cell at the mouse cursor position in the text console, rather than drawing an arrow on the screen. Submitted by: Nick Hibma (n_hibma@FreeBSD.ORG) SC_DFLT_FONT makeoptions "SC_DFLT_FONT=_font_name_" Include the named font as the default font of syscons. 16-line, 14-line and 8-line font data will be compiled in. This option replaces the existing STD8X16FONT option, which loads 16-line font data only. - The VGA driver is split into /sys/dev/fb/vga.c and /sys/isa/vga_isa.c. - The video driver provides a set of ioctl commands to manipulate the frame buffer. - New kernel configuration option: VGA_WIDTH90 Enables 90 column modes: 90x25, 90x30, 90x43, 90x50, 90x60. These modes are mot always supported by the video card. PR: i386/7510 Submitted by: kbyanc@freedomnet.com and alexv@sui.gda.itesm.mx. - The header file machine/console.h is reorganized; its contents is now split into sys/fbio.h, sys/kbio.h (a new file) and sys/consio.h (another new file). machine/console.h is still maintained for compatibility reasons. - Kernel console selection/installation routines are fixed and slightly rebumped so that it should now be possible to switch between the interanl kernel console (sc or vt) and a remote kernel console (sio) again, as it was in 2.x, 3.0 and 3.1. - Screen savers and splash screen decoders Because of the header file reorganization described above, screen savers and splash screen decoders are slightly modified. After this update, /sys/modules/syscons/saver.h is no longer necessary and is removed.
1999-06-22 14:14:06 +00:00
return 0;
}
static device_method_t sc_methods[] = {
DEVMETHOD(device_identify, scidentify),
DEVMETHOD(device_probe, scprobe),
DEVMETHOD(device_attach, scattach),
DEVMETHOD(device_suspend, scsuspend),
DEVMETHOD(device_resume, scresume),
{ 0, 0 }
};
static driver_t sc_driver = {
SC_DRIVER_NAME,
sc_methods,
sizeof(sc_softc_t),
};
DRIVER_MODULE(sc, isa, sc_driver, sc_devclass, 0, 0);