d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d630a05f40
freebsd-dev/usr.sbin/ppp/iface.h

66 lines
2.7 KiB
C
Raw Normal View History

Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
/*-
* Copyright (c) 1998 Brian Somers <brian@Awfulhak.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
$Id$ -> $FreeBSD$
1999-08-28 01:35:59 +00:00
* $FreeBSD$
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
*/
The interface list that comes back from the PF_ROUTE/NET_RT_IFLIST mib is aligned. Teach this to ``show route''. Clean up some of the sockaddr parsing routines.
2000-03-14 01:46:44 +00:00
struct ifa_msghdr;
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
struct iface_addr {
o Add ipv6 support, abstracting most NCP addresses into opaque structures (well, they're treated as opaque). It's now possible to manage IPv6 interface addresses and routing table entries and to filter IPV6 traffic whether encapsulated or not. IPV6CP support is crude for now, and hasn't been tested against any other implementations. RADIUS and IPv6 are independent of eachother for now. ppp.linkup/ppp.linkdown aren't currently used by IPV6CP o Understand all protocols(5) in filter rules rather than only a select few. o Allow a mask specification for the ``delete'' command. It's now possible to specifically delete one of two conflicting routes. o When creating and deleting proxy arp entries, do it for all IPv4 interface addresses rather than doing it just for the ``current'' peer address. o When iface-alias isn't in effect, don't blow away manually (via ``iface add'') added interface addresses. o When listening on a tcp server (diagnostic) socket, bind so that a tcp46 socket is created -- allowing both IPv4 and IPv6 connections. o When displaying ICMP traffic, don't display the icmp type twice. When display traffic, display at least some information about unrecognised traffic. o Bump version Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
unsigned system : 1; /* System alias ? */
struct ncprange ifa; /* local address/mask */
struct ncpaddr peer; /* peer address */
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
};
struct iface {
char *name; /* Interface name (malloc'd) */
int index; /* Interface index */
int flags; /* Interface flags (IFF_*) */
Make ppp WARNS=5 clean
2004-09-05 01:46:52 +00:00
unsigned long mtu; /* struct tuninfo MTU */
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
Make ppp WARNS=5 clean
2004-09-05 01:46:52 +00:00
unsigned addrs; /* How many in_addr's */
o Add ipv6 support, abstracting most NCP addresses into opaque structures (well, they're treated as opaque). It's now possible to manage IPv6 interface addresses and routing table entries and to filter IPV6 traffic whether encapsulated or not. IPV6CP support is crude for now, and hasn't been tested against any other implementations. RADIUS and IPv6 are independent of eachother for now. ppp.linkup/ppp.linkdown aren't currently used by IPV6CP o Understand all protocols(5) in filter rules rather than only a select few. o Allow a mask specification for the ``delete'' command. It's now possible to specifically delete one of two conflicting routes. o When creating and deleting proxy arp entries, do it for all IPv4 interface addresses rather than doing it just for the ``current'' peer address. o When iface-alias isn't in effect, don't blow away manually (via ``iface add'') added interface addresses. o When listening on a tcp server (diagnostic) socket, bind so that a tcp46 socket is created -- allowing both IPv4 and IPv6 connections. o When displaying ICMP traffic, don't display the icmp type twice. When display traffic, display at least some information about unrecognised traffic. o Bump version Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
struct iface_addr *addr; /* Array of addresses (malloc'd) */
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
};
#define IFACE_CLEAR_ALL 0 /* Nuke 'em all */
o Add ipv6 support, abstracting most NCP addresses into opaque structures (well, they're treated as opaque). It's now possible to manage IPv6 interface addresses and routing table entries and to filter IPV6 traffic whether encapsulated or not. IPV6CP support is crude for now, and hasn't been tested against any other implementations. RADIUS and IPv6 are independent of eachother for now. ppp.linkup/ppp.linkdown aren't currently used by IPV6CP o Understand all protocols(5) in filter rules rather than only a select few. o Allow a mask specification for the ``delete'' command. It's now possible to specifically delete one of two conflicting routes. o When creating and deleting proxy arp entries, do it for all IPv4 interface addresses rather than doing it just for the ``current'' peer address. o When iface-alias isn't in effect, don't blow away manually (via ``iface add'') added interface addresses. o When listening on a tcp server (diagnostic) socket, bind so that a tcp46 socket is created -- allowing both IPv4 and IPv6 connections. o When displaying ICMP traffic, don't display the icmp type twice. When display traffic, display at least some information about unrecognised traffic. o Bump version Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
#define IFACE_CLEAR_ALIASES 1 /* Leave the NCP address */
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
#define IFACE_ADD_LAST 0 /* Just another alias */
#define IFACE_ADD_FIRST 1 /* The IPCP address */
#define IFACE_FORCE_ADD 2 /* OR'd with IFACE_ADD_{FIRST,LAST} */
o Add ipv6 support, abstracting most NCP addresses into opaque structures (well, they're treated as opaque). It's now possible to manage IPv6 interface addresses and routing table entries and to filter IPV6 traffic whether encapsulated or not. IPV6CP support is crude for now, and hasn't been tested against any other implementations. RADIUS and IPv6 are independent of eachother for now. ppp.linkup/ppp.linkdown aren't currently used by IPV6CP o Understand all protocols(5) in filter rules rather than only a select few. o Allow a mask specification for the ``delete'' command. It's now possible to specifically delete one of two conflicting routes. o When creating and deleting proxy arp entries, do it for all IPv4 interface addresses rather than doing it just for the ``current'' peer address. o When iface-alias isn't in effect, don't blow away manually (via ``iface add'') added interface addresses. o When listening on a tcp server (diagnostic) socket, bind so that a tcp46 socket is created -- allowing both IPv4 and IPv6 connections. o When displaying ICMP traffic, don't display the icmp type twice. When display traffic, display at least some information about unrecognised traffic. o Bump version Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
#define IFACE_SYSTEM 4 /* Set/clear SYSTEM entries */
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
extern struct iface *iface_Create(const char *name);
o Add ipv6 support, abstracting most NCP addresses into opaque structures (well, they're treated as opaque). It's now possible to manage IPv6 interface addresses and routing table entries and to filter IPV6 traffic whether encapsulated or not. IPV6CP support is crude for now, and hasn't been tested against any other implementations. RADIUS and IPv6 are independent of eachother for now. ppp.linkup/ppp.linkdown aren't currently used by IPV6CP o Understand all protocols(5) in filter rules rather than only a select few. o Allow a mask specification for the ``delete'' command. It's now possible to specifically delete one of two conflicting routes. o When creating and deleting proxy arp entries, do it for all IPv4 interface addresses rather than doing it just for the ``current'' peer address. o When iface-alias isn't in effect, don't blow away manually (via ``iface add'') added interface addresses. o When listening on a tcp server (diagnostic) socket, bind so that a tcp46 socket is created -- allowing both IPv4 and IPv6 connections. o When displaying ICMP traffic, don't display the icmp type twice. When display traffic, display at least some information about unrecognised traffic. o Bump version Inspired after filtering work by: Makoto MATSUSHITA <matusita@jp.FreeBSD.org>
2001-08-14 16:05:52 +00:00
extern void iface_Clear(struct iface *, struct ncp *, int, int);
extern int iface_Add(struct iface *, struct ncp *, const struct ncprange *,
const struct ncpaddr *, int);
extern int iface_Delete(struct iface *, struct ncp *, const struct ncpaddr *);
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
extern int iface_Show(struct cmdargs const *);
Bring the PPPoE interface UP if required Suggested by: archie
2001-03-28 09:45:27 +00:00
extern int iface_SetFlags(const char *, int);
extern int iface_ClearFlags(const char *, int);
Solve the ``first connection'' problem that occurs on demand-dial links with dynamic IP numbers where the program that causes the dial bind()s to an interface address that is subsequently changed after ppp negotiation. The problem is defeated by adding negotiated addresses to the tun interface as additional alias addresses and providing a set of ``iface'' commands for managing the interface. Libalias is also required (and what a name clash!) - it happily IP-aliases the address so that the source is that of the primary (negotiated) interface and un-IP-aliases it on the way back. An ``enable iface-alias'' is done implicitly by the -alias command line switch. If -alias isn't given, iface-aliasing is disabled by default and can't be enabled 'till an ``alias enable yes'' is done. ``alias enable no'' silently disables iface-alias. So, for dynamic-IP-type-connections, running ``ppp -alias -auto blah'' will work for the first connection, although existing bindings will not survive a disconnect/connect as the TCP peer will be trying to send to the old IP address - the packets won't route. It's now a lot easier to add IPXCP to ppp with minor updates to the new iface.[ch] (if anyone ever gets 'round to it). It's also now possible to manually add interface aliases with something like ``iface add 1.2.3.4/24 5.6.7.8''. This allows multi-homed ppp links :-)
1998-10-22 02:32:50 +00:00
extern void iface_Destroy(struct iface *);
The interface list that comes back from the PF_ROUTE/NET_RT_IFLIST mib is aligned. Teach this to ``show route''. Clean up some of the sockaddr parsing routines.
2000-03-14 01:46:44 +00:00
extern void iface_ParseHdr(struct ifa_msghdr *, struct sockaddr *[RTAX_MAX]);
Reference in New Issue Copy Permalink