freebsd-dev/sys/kern/sys_pipe.c

1838 lines
45 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1996 John S. Dyson
* Copyright (c) 2012 Giovanni Trematerra
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice immediately at the beginning of the file, without modification,
* this list of conditions, and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Absolutely no warranty of function or purpose is made by the author
* John S. Dyson.
* 4. Modifications may be freely made to this file if the above conditions
* are met.
*/
/*
* This file contains a high-performance replacement for the socket-based
* pipes scheme originally used in FreeBSD/4.4Lite. It does not support
* all features of sockets, but does do everything that pipes normally
* do.
*/
/*
* This code has two modes of operation, a small write mode and a large
* write mode. The small write mode acts like conventional pipes with
* a kernel buffer. If the buffer is less than PIPE_MINDIRECT, then the
* "normal" pipe buffering is done. If the buffer is between PIPE_MINDIRECT
* and PIPE_SIZE in size, the sending process pins the underlying pages in
* memory, and the receiving process copies directly from these pinned pages
* in the sending process.
*
* If the sending process receives a signal, it is possible that it will
* go away, and certainly its address space can change, because control
* is returned back to the user-mode side. In that case, the pipe code
* arranges to copy the buffer supplied by the user process, to a pageable
* kernel buffer, and the receiving process will grab the data from the
* pageable kernel buffer. Since signals don't happen all that often,
* the copy operation is normally eliminated.
*
* The constant PIPE_MINDIRECT is chosen to make sure that buffering will
* happen for small transfers so that the system will not spend all of
* its time context switching.
*
* In order to limit the resource use of pipes, two sysctls exist:
*
* kern.ipc.maxpipekva - This is a hard limit on the amount of pageable
* address space available to us in pipe_map. This value is normally
* autotuned, but may also be loader tuned.
*
* kern.ipc.pipekva - This read-only sysctl tracks the current amount of
* memory in use by pipes.
*
* Based on how large pipekva is relative to maxpipekva, the following
* will happen:
*
* 0% - 50%:
* New pipes are given 16K of memory backing, pipes may dynamically
* grow to as large as 64K where needed.
* 50% - 75%:
* New pipes are given 4K (or PAGE_SIZE) of memory backing,
* existing pipes may NOT grow.
* 75% - 100%:
* New pipes are given 4K (or PAGE_SIZE) of memory backing,
* existing pipes will be shrunk down to 4K whenever possible.
*
* Resizing may be disabled by setting kern.ipc.piperesizeallowed=0. If
* that is set, the only resize that will occur is the 0 -> SMALL_PIPE_SIZE
* resize which MUST occur for reverse-direction pipes when they are
* first used.
*
* Additional information about the current state of pipes may be obtained
* from kern.ipc.pipes, kern.ipc.pipefragretry, kern.ipc.pipeallocfail,
* and kern.ipc.piperesizefail.
*
* Locking rules: There are two locks present here: A mutex, used via
* PIPE_LOCK, and a flag, used via pipelock(). All locking is done via
* the flag, as mutexes can not persist over uiomove. The mutex
* exists only to guard access to the flag, and is not in itself a
* locking mechanism. Also note that there is only a single mutex for
* both directions of a pipe.
*
* As pipelock() may have to sleep before it can acquire the flag, it
* is important to reread all data after a call to pipelock(); everything
* in the structure may have changed.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/conf.h>
#include <sys/fcntl.h>
#include <sys/file.h>
#include <sys/filedesc.h>
#include <sys/filio.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/ttycom.h>
#include <sys/stat.h>
#include <sys/malloc.h>
#include <sys/poll.h>
#include <sys/selinfo.h>
#include <sys/signalvar.h>
#include <sys/syscallsubr.h>
#include <sys/sysctl.h>
#include <sys/sysproto.h>
#include <sys/pipe.h>
#include <sys/proc.h>
#include <sys/vnode.h>
#include <sys/uio.h>
#include <sys/user.h>
#include <sys/event.h>
#include <security/mac/mac_framework.h>
#include <vm/vm.h>
#include <vm/vm_param.h>
#include <vm/vm_object.h>
#include <vm/vm_kern.h>
#include <vm/vm_extern.h>
#include <vm/pmap.h>
#include <vm/vm_map.h>
#include <vm/vm_page.h>
#include <vm/uma.h>
/*
* Use this define if you want to disable *fancy* VM things. Expect an
* approx 30% decrease in transfer rate. This could be useful for
* NetBSD or OpenBSD.
*/
/* #define PIPE_NODIRECT */
#define PIPE_PEER(pipe) \
(((pipe)->pipe_state & PIPE_NAMED) ? (pipe) : ((pipe)->pipe_peer))
/*
* interfaces to the outside world
*/
2002-12-24 09:44:51 +00:00
static fo_rdwr_t pipe_read;
static fo_rdwr_t pipe_write;
static fo_truncate_t pipe_truncate;
2002-12-24 09:44:51 +00:00
static fo_ioctl_t pipe_ioctl;
static fo_poll_t pipe_poll;
static fo_kqfilter_t pipe_kqfilter;
static fo_stat_t pipe_stat;
static fo_close_t pipe_close;
static fo_chmod_t pipe_chmod;
static fo_chown_t pipe_chown;
static fo_fill_kinfo_t pipe_fill_kinfo;
struct fileops pipeops = {
.fo_read = pipe_read,
.fo_write = pipe_write,
.fo_truncate = pipe_truncate,
.fo_ioctl = pipe_ioctl,
.fo_poll = pipe_poll,
.fo_kqfilter = pipe_kqfilter,
.fo_stat = pipe_stat,
.fo_close = pipe_close,
.fo_chmod = pipe_chmod,
.fo_chown = pipe_chown,
.fo_sendfile = invfo_sendfile,
.fo_fill_kinfo = pipe_fill_kinfo,
.fo_flags = DFLAG_PASSABLE
};
static void filt_pipedetach(struct knote *kn);
static void filt_pipedetach_notsup(struct knote *kn);
static int filt_pipenotsup(struct knote *kn, long hint);
static int filt_piperead(struct knote *kn, long hint);
static int filt_pipewrite(struct knote *kn, long hint);
static struct filterops pipe_nfiltops = {
.f_isfd = 1,
.f_detach = filt_pipedetach_notsup,
.f_event = filt_pipenotsup
};
static struct filterops pipe_rfiltops = {
.f_isfd = 1,
.f_detach = filt_pipedetach,
.f_event = filt_piperead
};
static struct filterops pipe_wfiltops = {
.f_isfd = 1,
.f_detach = filt_pipedetach,
.f_event = filt_pipewrite
};
/*
* Default pipe buffer size(s), this can be kind-of large now because pipe
* space is pageable. The pipe code will try to maintain locality of
* reference for performance reasons, so small amounts of outstanding I/O
* will not wipe the cache.
*/
#define MINPIPESIZE (PIPE_SIZE/3)
#define MAXPIPESIZE (2*PIPE_SIZE/3)
static long amountpipekva;
static int pipefragretry;
static int pipeallocfail;
static int piperesizefail;
static int piperesizeallowed = 1;
SYSCTL_LONG(_kern_ipc, OID_AUTO, maxpipekva, CTLFLAG_RDTUN | CTLFLAG_NOFETCH,
&maxpipekva, 0, "Pipe KVA limit");
SYSCTL_LONG(_kern_ipc, OID_AUTO, pipekva, CTLFLAG_RD,
&amountpipekva, 0, "Pipe KVA usage");
SYSCTL_INT(_kern_ipc, OID_AUTO, pipefragretry, CTLFLAG_RD,
&pipefragretry, 0, "Pipe allocation retries due to fragmentation");
SYSCTL_INT(_kern_ipc, OID_AUTO, pipeallocfail, CTLFLAG_RD,
&pipeallocfail, 0, "Pipe allocation failures");
SYSCTL_INT(_kern_ipc, OID_AUTO, piperesizefail, CTLFLAG_RD,
&piperesizefail, 0, "Pipe resize failures");
SYSCTL_INT(_kern_ipc, OID_AUTO, piperesizeallowed, CTLFLAG_RW,
&piperesizeallowed, 0, "Pipe resizing allowed");
2002-02-27 18:51:53 +00:00
static void pipeinit(void *dummy __unused);
static void pipeclose(struct pipe *cpipe);
static void pipe_free_kmem(struct pipe *cpipe);
static void pipe_create(struct pipe *pipe, int backing);
static void pipe_paircreate(struct thread *td, struct pipepair **p_pp);
2002-02-27 18:51:53 +00:00
static __inline int pipelock(struct pipe *cpipe, int catch);
static __inline void pipeunlock(struct pipe *cpipe);
#ifndef PIPE_NODIRECT
2002-02-27 18:51:53 +00:00
static int pipe_build_write_buffer(struct pipe *wpipe, struct uio *uio);
static void pipe_destroy_write_buffer(struct pipe *wpipe);
static int pipe_direct_write(struct pipe *wpipe, struct uio *uio);
static void pipe_clone_write_buffer(struct pipe *wpipe);
#endif
2002-02-27 18:51:53 +00:00
static int pipespace(struct pipe *cpipe, int size);
static int pipespace_new(struct pipe *cpipe, int size);
static int pipe_zone_ctor(void *mem, int size, void *arg, int flags);
static int pipe_zone_init(void *mem, int size, int flags);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
static void pipe_zone_fini(void *mem, int size);
static uma_zone_t pipe_zone;
static struct unrhdr *pipeino_unr;
static dev_t pipedev_ino;
SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_ANY, pipeinit, NULL);
static void
pipeinit(void *dummy __unused)
{
pipe_zone = uma_zcreate("pipe", sizeof(struct pipepair),
pipe_zone_ctor, NULL, pipe_zone_init, pipe_zone_fini,
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
UMA_ALIGN_PTR, 0);
KASSERT(pipe_zone != NULL, ("pipe_zone not initialized"));
pipeino_unr = new_unrhdr(1, INT32_MAX, NULL);
KASSERT(pipeino_unr != NULL, ("pipe fake inodes not initialized"));
pipedev_ino = devfs_alloc_cdp_inode();
KASSERT(pipedev_ino > 0, ("pipe dev inode not initialized"));
}
static int
pipe_zone_ctor(void *mem, int size, void *arg, int flags)
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
{
struct pipepair *pp;
struct pipe *rpipe, *wpipe;
KASSERT(size == sizeof(*pp), ("pipe_zone_ctor: wrong size"));
pp = (struct pipepair *)mem;
/*
* We zero both pipe endpoints to make sure all the kmem pointers
* are NULL, flag fields are zero'd, etc. We timestamp both
* endpoints with the same time.
*/
rpipe = &pp->pp_rpipe;
bzero(rpipe, sizeof(*rpipe));
vfs_timestamp(&rpipe->pipe_ctime);
rpipe->pipe_atime = rpipe->pipe_mtime = rpipe->pipe_ctime;
wpipe = &pp->pp_wpipe;
bzero(wpipe, sizeof(*wpipe));
wpipe->pipe_ctime = rpipe->pipe_ctime;
wpipe->pipe_atime = wpipe->pipe_mtime = rpipe->pipe_ctime;
rpipe->pipe_peer = wpipe;
rpipe->pipe_pair = pp;
wpipe->pipe_peer = rpipe;
wpipe->pipe_pair = pp;
/*
* Mark both endpoints as present; they will later get free'd
* one at a time. When both are free'd, then the whole pair
* is released.
*/
rpipe->pipe_present = PIPE_ACTIVE;
wpipe->pipe_present = PIPE_ACTIVE;
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
/*
* Eventually, the MAC Framework may initialize the label
* in ctor or init, but for now we do it elswhere to avoid
* blocking in ctor or init.
*/
pp->pp_label = NULL;
return (0);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
}
static int
pipe_zone_init(void *mem, int size, int flags)
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
{
struct pipepair *pp;
KASSERT(size == sizeof(*pp), ("pipe_zone_init: wrong size"));
pp = (struct pipepair *)mem;
mtx_init(&pp->pp_mtx, "pipe mutex", NULL, MTX_DEF | MTX_NEW);
return (0);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
}
static void
pipe_zone_fini(void *mem, int size)
{
struct pipepair *pp;
KASSERT(size == sizeof(*pp), ("pipe_zone_fini: wrong size"));
pp = (struct pipepair *)mem;
mtx_destroy(&pp->pp_mtx);
}
static void
pipe_paircreate(struct thread *td, struct pipepair **p_pp)
{
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
struct pipepair *pp;
struct pipe *rpipe, *wpipe;
*p_pp = pp = uma_zalloc(pipe_zone, M_WAITOK);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
#ifdef MAC
/*
* The MAC label is shared between the connected endpoints. As a
* result mac_pipe_init() and mac_pipe_create() are called once
* for the pair, and not on the endpoints.
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
*/
mac_pipe_init(pp);
mac_pipe_create(td->td_ucred, pp);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
#endif
rpipe = &pp->pp_rpipe;
wpipe = &pp->pp_wpipe;
knlist_init_mtx(&rpipe->pipe_sel.si_note, PIPE_MTX(rpipe));
knlist_init_mtx(&wpipe->pipe_sel.si_note, PIPE_MTX(wpipe));
/* Only the forward direction pipe is backed by default */
pipe_create(rpipe, 1);
pipe_create(wpipe, 0);
2004-01-11 19:54:45 +00:00
rpipe->pipe_state |= PIPE_DIRECTOK;
wpipe->pipe_state |= PIPE_DIRECTOK;
}
void
pipe_named_ctor(struct pipe **ppipe, struct thread *td)
{
struct pipepair *pp;
pipe_paircreate(td, &pp);
pp->pp_rpipe.pipe_state |= PIPE_NAMED;
*ppipe = &pp->pp_rpipe;
}
void
pipe_dtor(struct pipe *dpipe)
{
struct pipe *peer;
ino_t ino;
ino = dpipe->pipe_ino;
peer = (dpipe->pipe_state & PIPE_NAMED) != 0 ? dpipe->pipe_peer : NULL;
funsetown(&dpipe->pipe_sigio);
pipeclose(dpipe);
if (peer != NULL) {
funsetown(&peer->pipe_sigio);
pipeclose(peer);
}
if (ino != 0 && ino != (ino_t)-1)
free_unr(pipeino_unr, ino);
}
/*
* The pipe system call for the DTYPE_PIPE type of pipes. If we fail, let
* the zone pick up the pieces via pipeclose().
*/
int
kern_pipe(struct thread *td, int fildes[2], int flags, struct filecaps *fcaps1,
struct filecaps *fcaps2)
{
struct file *rf, *wf;
struct pipe *rpipe, *wpipe;
struct pipepair *pp;
int fd, fflags, error;
pipe_paircreate(td, &pp);
rpipe = &pp->pp_rpipe;
wpipe = &pp->pp_wpipe;
error = falloc_caps(td, &rf, &fd, flags, fcaps1);
if (error) {
pipeclose(rpipe);
pipeclose(wpipe);
return (error);
}
/* An extra reference on `rf' has been held for us by falloc_caps(). */
fildes[0] = fd;
fflags = FREAD | FWRITE;
if ((flags & O_NONBLOCK) != 0)
fflags |= FNONBLOCK;
/*
* Warning: once we've gotten past allocation of the fd for the
* read-side, we can only drop the read side via fdrop() in order
* to avoid races against processes which manage to dup() the read
* side while we are blocked trying to allocate the write side.
*/
finit(rf, fflags, DTYPE_PIPE, rpipe, &pipeops);
error = falloc_caps(td, &wf, &fd, flags, fcaps2);
if (error) {
fdclose(td, rf, fildes[0]);
fdrop(rf, td);
/* rpipe has been closed by fdrop(). */
pipeclose(wpipe);
return (error);
}
/* An extra reference on `wf' has been held for us by falloc_caps(). */
finit(wf, fflags, DTYPE_PIPE, wpipe, &pipeops);
fdrop(wf, td);
fildes[1] = fd;
fdrop(rf, td);
return (0);
}
/* ARGSUSED */
int
sys_pipe(struct thread *td, struct pipe_args *uap)
{
int error;
int fildes[2];
error = kern_pipe(td, fildes, 0, NULL, NULL);
if (error)
return (error);
2013-02-17 11:48:16 +00:00
td->td_retval[0] = fildes[0];
td->td_retval[1] = fildes[1];
return (0);
}
int
sys_pipe2(struct thread *td, struct pipe2_args *uap)
{
int error, fildes[2];
if (uap->flags & ~(O_CLOEXEC | O_NONBLOCK))
return (EINVAL);
error = kern_pipe(td, fildes, uap->flags, NULL, NULL);
if (error)
return (error);
error = copyout(fildes, uap->fildes, 2 * sizeof(int));
if (error) {
(void)kern_close(td, fildes[0]);
(void)kern_close(td, fildes[1]);
}
return (error);
}
/*
* Allocate kva for pipe circular buffer, the space is pageable
* This routine will 'realloc' the size of a pipe safely, if it fails
* it will retain the old buffer.
* If it fails it will return ENOMEM.
*/
static int
pipespace_new(cpipe, size)
struct pipe *cpipe;
int size;
{
caddr_t buffer;
int error, cnt, firstseg;
static int curfail = 0;
static struct timeval lastfail;
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
KASSERT(!mtx_owned(PIPE_MTX(cpipe)), ("pipespace: pipe mutex locked"));
KASSERT(!(cpipe->pipe_state & PIPE_DIRECTW),
("pipespace: resize of direct writes not allowed"));
retry:
cnt = cpipe->pipe_buffer.cnt;
if (cnt > size)
size = cnt;
size = round_page(size);
buffer = (caddr_t) vm_map_min(pipe_map);
error = vm_map_find(pipe_map, NULL, 0,
(vm_offset_t *) &buffer, size, 0, VMFS_ANY_SPACE,
VM_PROT_ALL, VM_PROT_ALL, 0);
if (error != KERN_SUCCESS) {
if ((cpipe->pipe_buffer.buffer == NULL) &&
(size > SMALL_PIPE_SIZE)) {
size = SMALL_PIPE_SIZE;
pipefragretry++;
goto retry;
}
if (cpipe->pipe_buffer.buffer == NULL) {
pipeallocfail++;
if (ppsratecheck(&lastfail, &curfail, 1))
printf("kern.ipc.maxpipekva exceeded; see tuning(7)\n");
} else {
piperesizefail++;
}
return (ENOMEM);
}
/* copy data, then free old resources if we're resizing */
if (cnt > 0) {
if (cpipe->pipe_buffer.in <= cpipe->pipe_buffer.out) {
firstseg = cpipe->pipe_buffer.size - cpipe->pipe_buffer.out;
bcopy(&cpipe->pipe_buffer.buffer[cpipe->pipe_buffer.out],
buffer, firstseg);
if ((cnt - firstseg) > 0)
bcopy(cpipe->pipe_buffer.buffer, &buffer[firstseg],
cpipe->pipe_buffer.in);
} else {
bcopy(&cpipe->pipe_buffer.buffer[cpipe->pipe_buffer.out],
buffer, cnt);
}
}
pipe_free_kmem(cpipe);
cpipe->pipe_buffer.buffer = buffer;
cpipe->pipe_buffer.size = size;
cpipe->pipe_buffer.in = cnt;
cpipe->pipe_buffer.out = 0;
cpipe->pipe_buffer.cnt = cnt;
atomic_add_long(&amountpipekva, cpipe->pipe_buffer.size);
return (0);
}
/*
* Wrapper for pipespace_new() that performs locking assertions.
*/
static int
pipespace(cpipe, size)
struct pipe *cpipe;
int size;
{
KASSERT(cpipe->pipe_state & PIPE_LOCKFL,
("Unlocked pipe passed to pipespace"));
return (pipespace_new(cpipe, size));
}
/*
* lock a pipe for I/O, blocking other access
*/
static __inline int
pipelock(cpipe, catch)
struct pipe *cpipe;
int catch;
{
int error;
PIPE_LOCK_ASSERT(cpipe, MA_OWNED);
while (cpipe->pipe_state & PIPE_LOCKFL) {
cpipe->pipe_state |= PIPE_LWANT;
error = msleep(cpipe, PIPE_MTX(cpipe),
catch ? (PRIBIO | PCATCH) : PRIBIO,
"pipelk", 0);
2004-01-11 19:54:45 +00:00
if (error != 0)
return (error);
}
cpipe->pipe_state |= PIPE_LOCKFL;
return (0);
}
/*
* unlock a pipe I/O lock
*/
static __inline void
pipeunlock(cpipe)
struct pipe *cpipe;
{
PIPE_LOCK_ASSERT(cpipe, MA_OWNED);
KASSERT(cpipe->pipe_state & PIPE_LOCKFL,
("Unlocked pipe passed to pipeunlock"));
cpipe->pipe_state &= ~PIPE_LOCKFL;
if (cpipe->pipe_state & PIPE_LWANT) {
cpipe->pipe_state &= ~PIPE_LWANT;
wakeup(cpipe);
}
}
void
pipeselwakeup(cpipe)
struct pipe *cpipe;
{
PIPE_LOCK_ASSERT(cpipe, MA_OWNED);
if (cpipe->pipe_state & PIPE_SEL) {
selwakeuppri(&cpipe->pipe_sel, PSOCK);
if (!SEL_WAITING(&cpipe->pipe_sel))
cpipe->pipe_state &= ~PIPE_SEL;
}
if ((cpipe->pipe_state & PIPE_ASYNC) && cpipe->pipe_sigio)
pgsigio(&cpipe->pipe_sigio, SIGIO, 0);
KNOTE_LOCKED(&cpipe->pipe_sel.si_note, 0);
}
/*
* Initialize and allocate VM and memory for pipe. The structure
* will start out zero'd from the ctor, so we just manage the kmem.
*/
static void
pipe_create(pipe, backing)
struct pipe *pipe;
int backing;
{
if (backing) {
/*
* Note that these functions can fail if pipe map is exhausted
* (as a result of too many pipes created), but we ignore the
* error as it is not fatal and could be provoked by
* unprivileged users. The only consequence is worse performance
* with given pipe.
*/
if (amountpipekva > maxpipekva / 2)
(void)pipespace_new(pipe, SMALL_PIPE_SIZE);
else
(void)pipespace_new(pipe, PIPE_SIZE);
}
pipe->pipe_ino = -1;
}
/* ARGSUSED */
static int
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
pipe_read(fp, uio, active_cred, flags, td)
struct file *fp;
struct uio *uio;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *active_cred;
struct thread *td;
int flags;
{
struct pipe *rpipe;
int error;
int nread = 0;
int size;
rpipe = fp->f_data;
PIPE_LOCK(rpipe);
++rpipe->pipe_busy;
error = pipelock(rpipe, 1);
if (error)
goto unlocked_error;
#ifdef MAC
error = mac_pipe_check_read(active_cred, rpipe->pipe_pair);
if (error)
goto locked_error;
#endif
if (amountpipekva > (3 * maxpipekva) / 4) {
if (!(rpipe->pipe_state & PIPE_DIRECTW) &&
(rpipe->pipe_buffer.size > SMALL_PIPE_SIZE) &&
(rpipe->pipe_buffer.cnt <= SMALL_PIPE_SIZE) &&
(piperesizeallowed == 1)) {
PIPE_UNLOCK(rpipe);
pipespace(rpipe, SMALL_PIPE_SIZE);
PIPE_LOCK(rpipe);
}
}
while (uio->uio_resid) {
/*
* normal pipe buffer receive
*/
if (rpipe->pipe_buffer.cnt > 0) {
size = rpipe->pipe_buffer.size - rpipe->pipe_buffer.out;
if (size > rpipe->pipe_buffer.cnt)
size = rpipe->pipe_buffer.cnt;
if (size > uio->uio_resid)
size = uio->uio_resid;
PIPE_UNLOCK(rpipe);
2003-06-09 21:57:48 +00:00
error = uiomove(
&rpipe->pipe_buffer.buffer[rpipe->pipe_buffer.out],
size, uio);
PIPE_LOCK(rpipe);
if (error)
break;
rpipe->pipe_buffer.out += size;
if (rpipe->pipe_buffer.out >= rpipe->pipe_buffer.size)
rpipe->pipe_buffer.out = 0;
rpipe->pipe_buffer.cnt -= size;
/*
* If there is no more to read in the pipe, reset
* its pointers to the beginning. This improves
* cache hit stats.
*/
if (rpipe->pipe_buffer.cnt == 0) {
rpipe->pipe_buffer.in = 0;
rpipe->pipe_buffer.out = 0;
}
nread += size;
#ifndef PIPE_NODIRECT
/*
* Direct copy, bypassing a kernel buffer.
*/
} else if ((size = rpipe->pipe_map.cnt) &&
(rpipe->pipe_state & PIPE_DIRECTW)) {
if (size > uio->uio_resid)
size = (u_int) uio->uio_resid;
PIPE_UNLOCK(rpipe);
error = uiomove_fromphys(rpipe->pipe_map.ms,
rpipe->pipe_map.pos, size, uio);
PIPE_LOCK(rpipe);
if (error)
break;
nread += size;
rpipe->pipe_map.pos += size;
rpipe->pipe_map.cnt -= size;
if (rpipe->pipe_map.cnt == 0) {
rpipe->pipe_state &= ~(PIPE_DIRECTW|PIPE_WANTW);
wakeup(rpipe);
}
#endif
} else {
/*
* detect EOF condition
* read returns 0 on EOF, no need to set error
*/
if (rpipe->pipe_state & PIPE_EOF)
break;
/*
* If the "write-side" has been blocked, wake it up now.
*/
if (rpipe->pipe_state & PIPE_WANTW) {
rpipe->pipe_state &= ~PIPE_WANTW;
wakeup(rpipe);
}
/*
* Break if some data was read.
*/
if (nread > 0)
break;
/*
2004-01-11 19:54:45 +00:00
* Unlock the pipe buffer for our remaining processing.
2003-06-09 21:57:48 +00:00
* We will either break out with an error or we will
* sleep and relock to loop.
*/
pipeunlock(rpipe);
/*
* Handle non-blocking mode operation or
* wait for more data.
*/
if (fp->f_flag & FNONBLOCK) {
error = EAGAIN;
} else {
rpipe->pipe_state |= PIPE_WANTR;
if ((error = msleep(rpipe, PIPE_MTX(rpipe),
PRIBIO | PCATCH,
2001-05-24 18:06:22 +00:00
"piperd", 0)) == 0)
error = pipelock(rpipe, 1);
}
if (error)
goto unlocked_error;
}
}
#ifdef MAC
locked_error:
#endif
pipeunlock(rpipe);
/* XXX: should probably do this before getting any locks. */
if (error == 0)
vfs_timestamp(&rpipe->pipe_atime);
unlocked_error:
--rpipe->pipe_busy;
/*
* PIPE_WANT processing only makes sense if pipe_busy is 0.
*/
if ((rpipe->pipe_busy == 0) && (rpipe->pipe_state & PIPE_WANT)) {
rpipe->pipe_state &= ~(PIPE_WANT|PIPE_WANTW);
wakeup(rpipe);
} else if (rpipe->pipe_buffer.cnt < MINPIPESIZE) {
/*
* Handle write blocking hysteresis.
*/
if (rpipe->pipe_state & PIPE_WANTW) {
rpipe->pipe_state &= ~PIPE_WANTW;
wakeup(rpipe);
}
}
if ((rpipe->pipe_buffer.size - rpipe->pipe_buffer.cnt) >= PIPE_BUF)
pipeselwakeup(rpipe);
PIPE_UNLOCK(rpipe);
return (error);
}
#ifndef PIPE_NODIRECT
/*
* Map the sending processes' buffer into kernel space and wire it.
* This is similar to a physical write operation.
*/
static int
pipe_build_write_buffer(wpipe, uio)
struct pipe *wpipe;
struct uio *uio;
{
u_int size;
int i;
PIPE_LOCK_ASSERT(wpipe, MA_NOTOWNED);
KASSERT(wpipe->pipe_state & PIPE_DIRECTW,
("Clone attempt on non-direct write pipe!"));
if (uio->uio_iov->iov_len > wpipe->pipe_buffer.size)
size = wpipe->pipe_buffer.size;
else
size = uio->uio_iov->iov_len;
if ((i = vm_fault_quick_hold_pages(&curproc->p_vmspace->vm_map,
(vm_offset_t)uio->uio_iov->iov_base, size, VM_PROT_READ,
wpipe->pipe_map.ms, PIPENPAGES)) < 0)
return (EFAULT);
/*
* set up the control block
*/
wpipe->pipe_map.npages = i;
wpipe->pipe_map.pos =
((vm_offset_t) uio->uio_iov->iov_base) & PAGE_MASK;
wpipe->pipe_map.cnt = size;
/*
* and update the uio data
*/
uio->uio_iov->iov_len -= size;
uio->uio_iov->iov_base = (char *)uio->uio_iov->iov_base + size;
if (uio->uio_iov->iov_len == 0)
uio->uio_iov++;
uio->uio_resid -= size;
uio->uio_offset += size;
return (0);
}
/*
* unmap and unwire the process buffer
*/
static void
pipe_destroy_write_buffer(wpipe)
struct pipe *wpipe;
{
PIPE_LOCK_ASSERT(wpipe, MA_OWNED);
vm_page_unhold_pages(wpipe->pipe_map.ms, wpipe->pipe_map.npages);
wpipe->pipe_map.npages = 0;
}
/*
* In the case of a signal, the writing process might go away. This
* code copies the data into the circular buffer so that the source
* pages can be freed without loss of data.
*/
static void
pipe_clone_write_buffer(wpipe)
struct pipe *wpipe;
{
struct uio uio;
struct iovec iov;
int size;
int pos;
PIPE_LOCK_ASSERT(wpipe, MA_OWNED);
size = wpipe->pipe_map.cnt;
pos = wpipe->pipe_map.pos;
wpipe->pipe_buffer.in = size;
wpipe->pipe_buffer.out = 0;
wpipe->pipe_buffer.cnt = size;
wpipe->pipe_state &= ~PIPE_DIRECTW;
PIPE_UNLOCK(wpipe);
iov.iov_base = wpipe->pipe_buffer.buffer;
iov.iov_len = size;
uio.uio_iov = &iov;
uio.uio_iovcnt = 1;
uio.uio_offset = 0;
uio.uio_resid = size;
uio.uio_segflg = UIO_SYSSPACE;
uio.uio_rw = UIO_READ;
uio.uio_td = curthread;
uiomove_fromphys(wpipe->pipe_map.ms, pos, size, &uio);
PIPE_LOCK(wpipe);
pipe_destroy_write_buffer(wpipe);
}
/*
* This implements the pipe buffer write mechanism. Note that only
* a direct write OR a normal pipe write can be pending at any given time.
* If there are any characters in the pipe buffer, the direct write will
* be deferred until the receiving process grabs all of the bytes from
* the pipe buffer. Then the direct mapping write is set-up.
*/
static int
pipe_direct_write(wpipe, uio)
struct pipe *wpipe;
struct uio *uio;
{
int error;
1996-02-07 06:41:56 +00:00
retry:
PIPE_LOCK_ASSERT(wpipe, MA_OWNED);
error = pipelock(wpipe, 1);
if (error != 0)
goto error1;
if ((wpipe->pipe_state & PIPE_EOF) != 0) {
error = EPIPE;
pipeunlock(wpipe);
goto error1;
}
while (wpipe->pipe_state & PIPE_DIRECTW) {
if (wpipe->pipe_state & PIPE_WANTR) {
1996-02-07 06:41:56 +00:00
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
pipeselwakeup(wpipe);
wpipe->pipe_state |= PIPE_WANTW;
pipeunlock(wpipe);
error = msleep(wpipe, PIPE_MTX(wpipe),
PRIBIO | PCATCH, "pipdww", 0);
if (error)
goto error1;
else
goto retry;
}
wpipe->pipe_map.cnt = 0; /* transfer not ready yet */
1996-02-07 06:41:56 +00:00
if (wpipe->pipe_buffer.cnt > 0) {
if (wpipe->pipe_state & PIPE_WANTR) {
1996-02-07 06:41:56 +00:00
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
pipeselwakeup(wpipe);
wpipe->pipe_state |= PIPE_WANTW;
pipeunlock(wpipe);
error = msleep(wpipe, PIPE_MTX(wpipe),
PRIBIO | PCATCH, "pipdwc", 0);
if (error)
goto error1;
else
goto retry;
}
1996-02-07 06:41:56 +00:00
wpipe->pipe_state |= PIPE_DIRECTW;
PIPE_UNLOCK(wpipe);
error = pipe_build_write_buffer(wpipe, uio);
PIPE_LOCK(wpipe);
if (error) {
wpipe->pipe_state &= ~PIPE_DIRECTW;
pipeunlock(wpipe);
goto error1;
}
error = 0;
while (!error && (wpipe->pipe_state & PIPE_DIRECTW)) {
if (wpipe->pipe_state & PIPE_EOF) {
pipe_destroy_write_buffer(wpipe);
pipeselwakeup(wpipe);
pipeunlock(wpipe);
error = EPIPE;
goto error1;
}
if (wpipe->pipe_state & PIPE_WANTR) {
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
pipeselwakeup(wpipe);
wpipe->pipe_state |= PIPE_WANTW;
pipeunlock(wpipe);
error = msleep(wpipe, PIPE_MTX(wpipe), PRIBIO | PCATCH,
"pipdwt", 0);
pipelock(wpipe, 0);
}
if (wpipe->pipe_state & PIPE_EOF)
error = EPIPE;
if (wpipe->pipe_state & PIPE_DIRECTW) {
/*
* this bit of trickery substitutes a kernel buffer for
* the process that might be going away.
*/
pipe_clone_write_buffer(wpipe);
} else {
pipe_destroy_write_buffer(wpipe);
}
pipeunlock(wpipe);
return (error);
error1:
wakeup(wpipe);
return (error);
}
#endif
2004-01-11 19:54:45 +00:00
static int
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
pipe_write(fp, uio, active_cred, flags, td)
struct file *fp;
struct uio *uio;
In order to better support flexible and extensible access control, make a series of modifications to the credential arguments relating to file read and write operations to cliarfy which credential is used for what: - Change fo_read() and fo_write() to accept "active_cred" instead of "cred", and change the semantics of consumers of fo_read() and fo_write() to pass the active credential of the thread requesting an operation rather than the cached file cred. The cached file cred is still available in fo_read() and fo_write() consumers via fp->f_cred. These changes largely in sys_generic.c. For each implementation of fo_read() and fo_write(), update cred usage to reflect this change and maintain current semantics: - badfo_readwrite() unchanged - kqueue_read/write() unchanged pipe_read/write() now authorize MAC using active_cred rather than td->td_ucred - soo_read/write() unchanged - vn_read/write() now authorize MAC using active_cred but VOP_READ/WRITE() with fp->f_cred Modify vn_rdwr() to accept two credential arguments instead of a single credential: active_cred and file_cred. Use active_cred for MAC authorization, and select a credential for use in VOP_READ/WRITE() based on whether file_cred is NULL or not. If file_cred is provided, authorize the VOP using that cred, otherwise the active credential, matching current semantics. Modify current vn_rdwr() consumers to pass a file_cred if used in the context of a struct file, and to always pass active_cred. When vn_rdwr() is used without a file_cred, pass NOCRED. These changes should maintain current semantics for read/write, but avoid a redundant passing of fp->f_cred, as well as making it more clear what the origin of each credential is in file descriptor read/write operations. Follow-up commits will make similar changes to other file descriptor operations, and modify the MAC framework to pass both credentials to MAC policy modules so they can implement either semantic for revocation. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-15 20:55:08 +00:00
struct ucred *active_cred;
struct thread *td;
int flags;
{
int error = 0;
int desiredsize;
ssize_t orig_resid;
struct pipe *wpipe, *rpipe;
rpipe = fp->f_data;
wpipe = PIPE_PEER(rpipe);
PIPE_LOCK(rpipe);
error = pipelock(wpipe, 1);
if (error) {
PIPE_UNLOCK(rpipe);
return (error);
}
/*
* detect loss of pipe read side, issue SIGPIPE if lost.
*/
if (wpipe->pipe_present != PIPE_ACTIVE ||
(wpipe->pipe_state & PIPE_EOF)) {
pipeunlock(wpipe);
PIPE_UNLOCK(rpipe);
return (EPIPE);
}
#ifdef MAC
error = mac_pipe_check_write(active_cred, wpipe->pipe_pair);
if (error) {
pipeunlock(wpipe);
PIPE_UNLOCK(rpipe);
return (error);
}
#endif
++wpipe->pipe_busy;
/* Choose a larger size if it's advantageous */
desiredsize = max(SMALL_PIPE_SIZE, wpipe->pipe_buffer.size);
while (desiredsize < wpipe->pipe_buffer.cnt + uio->uio_resid) {
if (piperesizeallowed != 1)
break;
if (amountpipekva > maxpipekva / 2)
break;
if (desiredsize == BIG_PIPE_SIZE)
break;
desiredsize = desiredsize * 2;
}
/* Choose a smaller size if we're in a OOM situation */
if ((amountpipekva > (3 * maxpipekva) / 4) &&
(wpipe->pipe_buffer.size > SMALL_PIPE_SIZE) &&
(wpipe->pipe_buffer.cnt <= SMALL_PIPE_SIZE) &&
(piperesizeallowed == 1))
desiredsize = SMALL_PIPE_SIZE;
/* Resize if the above determined that a new size was necessary */
if ((desiredsize != wpipe->pipe_buffer.size) &&
((wpipe->pipe_state & PIPE_DIRECTW) == 0)) {
PIPE_UNLOCK(wpipe);
pipespace(wpipe, desiredsize);
PIPE_LOCK(wpipe);
}
if (wpipe->pipe_buffer.size == 0) {
/*
* This can only happen for reverse direction use of pipes
* in a complete OOM situation.
*/
error = ENOMEM;
--wpipe->pipe_busy;
pipeunlock(wpipe);
PIPE_UNLOCK(wpipe);
return (error);
}
pipeunlock(wpipe);
2004-01-11 19:54:45 +00:00
orig_resid = uio->uio_resid;
while (uio->uio_resid) {
int space;
pipelock(wpipe, 0);
if (wpipe->pipe_state & PIPE_EOF) {
pipeunlock(wpipe);
error = EPIPE;
break;
}
#ifndef PIPE_NODIRECT
/*
* If the transfer is large, we can gain performance if
* we do process-to-process copies directly.
* If the write is non-blocking, we don't use the
* direct write mechanism.
*
* The direct write mechanism will detect the reader going
* away on us.
*/
if (uio->uio_segflg == UIO_USERSPACE &&
uio->uio_iov->iov_len >= PIPE_MINDIRECT &&
wpipe->pipe_buffer.size >= PIPE_MINDIRECT &&
(fp->f_flag & FNONBLOCK) == 0) {
pipeunlock(wpipe);
2002-10-12 22:26:41 +00:00
error = pipe_direct_write(wpipe, uio);
if (error)
break;
continue;
}
#endif
/*
* Pipe buffered writes cannot be coincidental with
* direct writes. We wait until the currently executing
* direct write is completed before we start filling the
* pipe buffer. We break out if a signal occurs or the
* reader goes away.
*/
if (wpipe->pipe_state & PIPE_DIRECTW) {
if (wpipe->pipe_state & PIPE_WANTR) {
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
pipeselwakeup(wpipe);
wpipe->pipe_state |= PIPE_WANTW;
pipeunlock(wpipe);
error = msleep(wpipe, PIPE_MTX(rpipe), PRIBIO | PCATCH,
"pipbww", 0);
if (error)
break;
else
continue;
}
space = wpipe->pipe_buffer.size - wpipe->pipe_buffer.cnt;
/* Writes of size <= PIPE_BUF must be atomic. */
if ((space < uio->uio_resid) && (orig_resid <= PIPE_BUF))
space = 0;
if (space > 0) {
int size; /* Transfer size */
int segsize; /* first segment to transfer */
/*
* Transfer size is minimum of uio transfer
* and free space in pipe buffer.
*/
if (space > uio->uio_resid)
size = uio->uio_resid;
else
size = space;
/*
* First segment to transfer is minimum of
* transfer size and contiguous space in
* pipe buffer. If first segment to transfer
* is less than the transfer size, we've got
* a wraparound in the buffer.
*/
segsize = wpipe->pipe_buffer.size -
wpipe->pipe_buffer.in;
if (segsize > size)
segsize = size;
/* Transfer first segment */
PIPE_UNLOCK(rpipe);
error = uiomove(&wpipe->pipe_buffer.buffer[wpipe->pipe_buffer.in],
segsize, uio);
PIPE_LOCK(rpipe);
if (error == 0 && segsize < size) {
KASSERT(wpipe->pipe_buffer.in + segsize ==
wpipe->pipe_buffer.size,
("Pipe buffer wraparound disappeared"));
/*
* Transfer remaining part now, to
* support atomic writes. Wraparound
* happened.
*/
PIPE_UNLOCK(rpipe);
error = uiomove(
&wpipe->pipe_buffer.buffer[0],
size - segsize, uio);
PIPE_LOCK(rpipe);
}
if (error == 0) {
wpipe->pipe_buffer.in += size;
if (wpipe->pipe_buffer.in >=
wpipe->pipe_buffer.size) {
KASSERT(wpipe->pipe_buffer.in ==
size - segsize +
wpipe->pipe_buffer.size,
("Expected wraparound bad"));
wpipe->pipe_buffer.in = size - segsize;
}
2004-01-11 19:54:45 +00:00
wpipe->pipe_buffer.cnt += size;
KASSERT(wpipe->pipe_buffer.cnt <=
wpipe->pipe_buffer.size,
("Pipe buffer overflow"));
}
pipeunlock(wpipe);
if (error != 0)
break;
} else {
/*
* If the "read-side" has been blocked, wake it up now.
*/
if (wpipe->pipe_state & PIPE_WANTR) {
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
/*
* don't block on non-blocking I/O
*/
if (fp->f_flag & FNONBLOCK) {
error = EAGAIN;
pipeunlock(wpipe);
break;
}
/*
* We have no more space and have something to offer,
* wake up select/poll.
*/
pipeselwakeup(wpipe);
wpipe->pipe_state |= PIPE_WANTW;
pipeunlock(wpipe);
error = msleep(wpipe, PIPE_MTX(rpipe),
PRIBIO | PCATCH, "pipewr", 0);
if (error != 0)
break;
}
}
pipelock(wpipe, 0);
--wpipe->pipe_busy;
if ((wpipe->pipe_busy == 0) && (wpipe->pipe_state & PIPE_WANT)) {
wpipe->pipe_state &= ~(PIPE_WANT | PIPE_WANTR);
wakeup(wpipe);
} else if (wpipe->pipe_buffer.cnt > 0) {
/*
* If we have put any characters in the buffer, we wake up
* the reader.
*/
if (wpipe->pipe_state & PIPE_WANTR) {
wpipe->pipe_state &= ~PIPE_WANTR;
wakeup(wpipe);
}
}
/*
* Don't return EPIPE if any byte was written.
* EINTR and other interrupts are handled by generic I/O layer.
* Do not pretend that I/O succeeded for obvious user error
* like EFAULT.
*/
if (uio->uio_resid != orig_resid && error == EPIPE)
error = 0;
if (error == 0)
vfs_timestamp(&wpipe->pipe_mtime);
/*
* We have something to offer,
* wake up select/poll.
*/
if (wpipe->pipe_buffer.cnt)
pipeselwakeup(wpipe);
pipeunlock(wpipe);
PIPE_UNLOCK(rpipe);
return (error);
}
/* ARGSUSED */
static int
pipe_truncate(fp, length, active_cred, td)
struct file *fp;
off_t length;
struct ucred *active_cred;
struct thread *td;
{
struct pipe *cpipe;
int error;
cpipe = fp->f_data;
if (cpipe->pipe_state & PIPE_NAMED)
error = vnops.fo_truncate(fp, length, active_cred, td);
else
error = invfo_truncate(fp, length, active_cred, td);
return (error);
}
/*
* we implement a very minimal set of ioctls for compatibility with sockets.
*/
static int
pipe_ioctl(fp, cmd, data, active_cred, td)
struct file *fp;
u_long cmd;
void *data;
struct ucred *active_cred;
struct thread *td;
{
struct pipe *mpipe = fp->f_data;
int error;
PIPE_LOCK(mpipe);
#ifdef MAC
error = mac_pipe_check_ioctl(active_cred, mpipe->pipe_pair, cmd, data);
if (error) {
PIPE_UNLOCK(mpipe);
return (error);
}
#endif
error = 0;
switch (cmd) {
case FIONBIO:
break;
case FIOASYNC:
if (*(int *)data) {
mpipe->pipe_state |= PIPE_ASYNC;
} else {
mpipe->pipe_state &= ~PIPE_ASYNC;
}
break;
case FIONREAD:
if (!(fp->f_flag & FREAD)) {
*(int *)data = 0;
PIPE_UNLOCK(mpipe);
return (0);
}
if (mpipe->pipe_state & PIPE_DIRECTW)
*(int *)data = mpipe->pipe_map.cnt;
else
*(int *)data = mpipe->pipe_buffer.cnt;
break;
case FIOSETOWN:
PIPE_UNLOCK(mpipe);
error = fsetown(*(int *)data, &mpipe->pipe_sigio);
goto out_unlocked;
case FIOGETOWN:
*(int *)data = fgetown(&mpipe->pipe_sigio);
break;
/* This is deprecated, FIOSETOWN should be used instead. */
case TIOCSPGRP:
PIPE_UNLOCK(mpipe);
error = fsetown(-(*(int *)data), &mpipe->pipe_sigio);
goto out_unlocked;
/* This is deprecated, FIOGETOWN should be used instead. */
case TIOCGPGRP:
*(int *)data = -fgetown(&mpipe->pipe_sigio);
break;
default:
error = ENOTTY;
2004-11-16 06:57:52 +00:00
break;
}
PIPE_UNLOCK(mpipe);
out_unlocked:
return (error);
}
static int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
pipe_poll(fp, events, active_cred, td)
struct file *fp;
int events;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *active_cred;
struct thread *td;
{
struct pipe *rpipe;
struct pipe *wpipe;
int levents, revents;
#ifdef MAC
int error;
#endif
revents = 0;
rpipe = fp->f_data;
wpipe = PIPE_PEER(rpipe);
PIPE_LOCK(rpipe);
#ifdef MAC
error = mac_pipe_check_poll(active_cred, rpipe->pipe_pair);
if (error)
goto locked_error;
#endif
if (fp->f_flag & FREAD && events & (POLLIN | POLLRDNORM))
if ((rpipe->pipe_state & PIPE_DIRECTW) ||
(rpipe->pipe_buffer.cnt > 0))
revents |= events & (POLLIN | POLLRDNORM);
if (fp->f_flag & FWRITE && events & (POLLOUT | POLLWRNORM))
if (wpipe->pipe_present != PIPE_ACTIVE ||
(wpipe->pipe_state & PIPE_EOF) ||
(((wpipe->pipe_state & PIPE_DIRECTW) == 0) &&
((wpipe->pipe_buffer.size - wpipe->pipe_buffer.cnt) >= PIPE_BUF ||
wpipe->pipe_buffer.size == 0)))
revents |= events & (POLLOUT | POLLWRNORM);
levents = events &
(POLLIN | POLLINIGNEOF | POLLPRI | POLLRDNORM | POLLRDBAND);
if (rpipe->pipe_state & PIPE_NAMED && fp->f_flag & FREAD && levents &&
fp->f_seqcount == rpipe->pipe_wgen)
events |= POLLINIGNEOF;
if ((events & POLLINIGNEOF) == 0) {
if (rpipe->pipe_state & PIPE_EOF) {
revents |= (events & (POLLIN | POLLRDNORM));
if (wpipe->pipe_present != PIPE_ACTIVE ||
(wpipe->pipe_state & PIPE_EOF))
revents |= POLLHUP;
}
}
if (revents == 0) {
if (fp->f_flag & FREAD && events & (POLLIN | POLLRDNORM)) {
selrecord(td, &rpipe->pipe_sel);
if (SEL_WAITING(&rpipe->pipe_sel))
rpipe->pipe_state |= PIPE_SEL;
}
if (fp->f_flag & FWRITE && events & (POLLOUT | POLLWRNORM)) {
selrecord(td, &wpipe->pipe_sel);
if (SEL_WAITING(&wpipe->pipe_sel))
wpipe->pipe_state |= PIPE_SEL;
}
}
#ifdef MAC
locked_error:
#endif
PIPE_UNLOCK(rpipe);
return (revents);
}
/*
* We shouldn't need locks here as we're doing a read and this should
* be a natural race.
*/
static int
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
pipe_stat(fp, ub, active_cred, td)
struct file *fp;
struct stat *ub;
Make similar changes to fo_stat() and fo_poll() as made earlier to fo_read() and fo_write(): explicitly use the cred argument to fo_poll() as "active_cred" using the passed file descriptor's f_cred reference to provide access to the file credential. Add an active_cred argument to fo_stat() so that implementers have access to the active credential as well as the file credential. Generally modify callers of fo_stat() to pass in td->td_ucred rather than fp->f_cred, which was redundantly provided via the fp argument. This set of modifications also permits threads to perform these operations on behalf of another thread without modifying their credential. Trickle this change down into fo_stat/poll() implementations: - badfo_poll(), badfo_stat(): modify/add arguments. - kqueue_poll(), kqueue_stat(): modify arguments. - pipe_poll(), pipe_stat(): modify/add arguments, pass active_cred to MAC checks rather than td->td_ucred. - soo_poll(), soo_stat(): modify/add arguments, pass fp->f_cred rather than cred to pru_sopoll() to maintain current semantics. - sopoll(): moidfy arguments. - vn_poll(), vn_statfile(): modify/add arguments, pass new arguments to vn_stat(). Pass active_cred to MAC and fp->f_cred to VOP_POLL() to maintian current semantics. - vn_close(): rename cred to file_cred to reflect reality while I'm here. - vn_stat(): Add active_cred and file_cred arguments to vn_stat() and consumers so that this distinction is maintained at the VFS as well as 'struct file' layer. Pass active_cred instead of td->td_ucred to MAC and to VOP_GETATTR() to maintain current semantics. - fifofs: modify the creation of a "filetemp" so that the file credential is properly initialized and can be used in the socket code if desired. Pass ap->a_td->td_ucred as the active credential to soo_poll(). If we teach the vnop interface about the distinction between file and active credentials, we would use the active credential here. Note that current inconsistent passing of active_cred vs. file_cred to VOP's is maintained. It's not clear why GETATTR would be authorized using active_cred while POLL would be authorized using file_cred at the file system level. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-08-16 12:52:03 +00:00
struct ucred *active_cred;
struct thread *td;
{
struct pipe *pipe;
int new_unr;
#ifdef MAC
int error;
#endif
pipe = fp->f_data;
PIPE_LOCK(pipe);
#ifdef MAC
error = mac_pipe_check_stat(active_cred, pipe->pipe_pair);
if (error) {
PIPE_UNLOCK(pipe);
return (error);
}
#endif
/* For named pipes ask the underlying filesystem. */
if (pipe->pipe_state & PIPE_NAMED) {
PIPE_UNLOCK(pipe);
return (vnops.fo_stat(fp, ub, active_cred, td));
}
/*
* Lazily allocate an inode number for the pipe. Most pipe
* users do not call fstat(2) on the pipe, which means that
* postponing the inode allocation until it is must be
* returned to userland is useful. If alloc_unr failed,
* assign st_ino zero instead of returning an error.
* Special pipe_ino values:
* -1 - not yet initialized;
* 0 - alloc_unr failed, return 0 as st_ino forever.
*/
if (pipe->pipe_ino == (ino_t)-1) {
new_unr = alloc_unr(pipeino_unr);
if (new_unr != -1)
pipe->pipe_ino = new_unr;
else
pipe->pipe_ino = 0;
}
PIPE_UNLOCK(pipe);
2002-07-22 19:05:44 +00:00
bzero(ub, sizeof(*ub));
ub->st_mode = S_IFIFO;
ub->st_blksize = PAGE_SIZE;
if (pipe->pipe_state & PIPE_DIRECTW)
ub->st_size = pipe->pipe_map.cnt;
else
ub->st_size = pipe->pipe_buffer.cnt;
ub->st_blocks = (ub->st_size + ub->st_blksize - 1) / ub->st_blksize;
ub->st_atim = pipe->pipe_atime;
ub->st_mtim = pipe->pipe_mtime;
ub->st_ctim = pipe->pipe_ctime;
ub->st_uid = fp->f_cred->cr_uid;
ub->st_gid = fp->f_cred->cr_gid;
ub->st_dev = pipedev_ino;
ub->st_ino = pipe->pipe_ino;
/*
* Left as 0: st_nlink, st_rdev, st_flags, st_gen.
*/
return (0);
}
/* ARGSUSED */
static int
pipe_close(fp, td)
struct file *fp;
struct thread *td;
{
if (fp->f_vnode != NULL)
return vnops.fo_close(fp, td);
fp->f_ops = &badfileops;
pipe_dtor(fp->f_data);
fp->f_data = NULL;
return (0);
}
static int
pipe_chmod(struct file *fp, mode_t mode, struct ucred *active_cred, struct thread *td)
{
struct pipe *cpipe;
int error;
cpipe = fp->f_data;
if (cpipe->pipe_state & PIPE_NAMED)
error = vn_chmod(fp, mode, active_cred, td);
else
error = invfo_chmod(fp, mode, active_cred, td);
return (error);
}
static int
pipe_chown(fp, uid, gid, active_cred, td)
struct file *fp;
uid_t uid;
gid_t gid;
struct ucred *active_cred;
struct thread *td;
{
struct pipe *cpipe;
int error;
cpipe = fp->f_data;
if (cpipe->pipe_state & PIPE_NAMED)
error = vn_chown(fp, uid, gid, active_cred, td);
else
error = invfo_chown(fp, uid, gid, active_cred, td);
return (error);
}
static int
pipe_fill_kinfo(struct file *fp, struct kinfo_file *kif, struct filedesc *fdp)
{
struct pipe *pi;
if (fp->f_type == DTYPE_FIFO)
return (vn_fill_kinfo(fp, kif, fdp));
kif->kf_type = KF_TYPE_PIPE;
pi = fp->f_data;
kif->kf_un.kf_pipe.kf_pipe_addr = (uintptr_t)pi;
kif->kf_un.kf_pipe.kf_pipe_peer = (uintptr_t)pi->pipe_peer;
kif->kf_un.kf_pipe.kf_pipe_buffer_cnt = pi->pipe_buffer.cnt;
return (0);
}
static void
pipe_free_kmem(cpipe)
struct pipe *cpipe;
{
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
KASSERT(!mtx_owned(PIPE_MTX(cpipe)),
("pipe_free_kmem: pipe mutex locked"));
if (cpipe->pipe_buffer.buffer != NULL) {
atomic_subtract_long(&amountpipekva, cpipe->pipe_buffer.size);
vm_map_remove(pipe_map,
(vm_offset_t)cpipe->pipe_buffer.buffer,
(vm_offset_t)cpipe->pipe_buffer.buffer + cpipe->pipe_buffer.size);
cpipe->pipe_buffer.buffer = NULL;
}
#ifndef PIPE_NODIRECT
{
cpipe->pipe_map.cnt = 0;
cpipe->pipe_map.pos = 0;
cpipe->pipe_map.npages = 0;
}
#endif
}
/*
* shutdown the pipe
*/
static void
pipeclose(cpipe)
struct pipe *cpipe;
{
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
struct pipepair *pp;
struct pipe *ppipe;
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
KASSERT(cpipe != NULL, ("pipeclose: cpipe == NULL"));
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
PIPE_LOCK(cpipe);
pipelock(cpipe, 0);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
pp = cpipe->pipe_pair;
2004-01-11 19:54:45 +00:00
pipeselwakeup(cpipe);
/*
* If the other side is blocked, wake it up saying that
* we want to close it down.
*/
cpipe->pipe_state |= PIPE_EOF;
while (cpipe->pipe_busy) {
wakeup(cpipe);
cpipe->pipe_state |= PIPE_WANT;
pipeunlock(cpipe);
msleep(cpipe, PIPE_MTX(cpipe), PRIBIO, "pipecl", 0);
pipelock(cpipe, 0);
}
/*
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
* Disconnect from peer, if any.
*/
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
ppipe = cpipe->pipe_peer;
if (ppipe->pipe_present == PIPE_ACTIVE) {
pipeselwakeup(ppipe);
ppipe->pipe_state |= PIPE_EOF;
wakeup(ppipe);
KNOTE_LOCKED(&ppipe->pipe_sel.si_note, 0);
}
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
/*
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
* Mark this endpoint as free. Release kmem resources. We
* don't mark this endpoint as unused until we've finished
* doing that, or the pipe might disappear out from under
* us.
*/
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
PIPE_UNLOCK(cpipe);
pipe_free_kmem(cpipe);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
PIPE_LOCK(cpipe);
cpipe->pipe_present = PIPE_CLOSING;
pipeunlock(cpipe);
/*
* knlist_clear() may sleep dropping the PIPE_MTX. Set the
* PIPE_FINALIZED, that allows other end to free the
* pipe_pair, only after the knotes are completely dismantled.
*/
knlist_clear(&cpipe->pipe_sel.si_note, 1);
cpipe->pipe_present = PIPE_FINALIZED;
seldrain(&cpipe->pipe_sel);
knlist_destroy(&cpipe->pipe_sel.si_note);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
/*
* If both endpoints are now closed, release the memory for the
* pipe pair. If not, unlock.
*/
if (ppipe->pipe_present == PIPE_FINALIZED) {
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
PIPE_UNLOCK(cpipe);
#ifdef MAC
mac_pipe_destroy(pp);
Coalesce pipe allocations and frees. Previously, the pipe code would allocate two 'struct pipe's from the pipe zone, and malloc a mutex. - Create a new "struct pipepair" object holding the two 'struct pipe' instances, struct mutex, and struct label reference. Pipe structures now have a back-pointer to the pipe pair, and a 'pipe_present' flag to indicate whether the half has been closed. - Perform mutex init/destroy in zone init/destroy, avoiding reallocating the mutex for each pipe. Perform most pipe structure setup in zone constructor. - VM memory mappings for pageable buffers are still done outside of the UMA zone. - Change MAC API to speak 'struct pipepair' instead of 'struct pipe', update many policies. MAC labels are also handled outside of the UMA zone for now. Label-only policy modules don't have to be recompiled, but if a module is recompiled, its pipe entry points will need to be updated. If a module actually reached into the pipe structures (unlikely), that would also need to be modified. These changes substantially simplify failure handling in the pipe code as there are many fewer possible failure modes. On half-close, pipes no longer free the 'struct pipe' for the closed half until a full-close takes place. However, VM mapped buffers are still released on half-close. Some code refactoring is now possible to clean up some of the back references, etc; this patch attempts not to change the structure of most of the pipe implementation, only allocation/free code paths, so as to avoid introducing bugs (hopefully). This cuts about 8%-9% off the cost of sequential pipe allocation and free in system call tests on UP and SMP in my micro-benchmarks. May or may not make a difference in macro-benchmarks, but doing less work is good. Reviewed by: juli, tjr Testing help: dwhite, fenestro, scottl, et al
2004-02-01 05:56:51 +00:00
#endif
uma_zfree(pipe_zone, cpipe->pipe_pair);
} else
PIPE_UNLOCK(cpipe);
}
/*ARGSUSED*/
static int
pipe_kqfilter(struct file *fp, struct knote *kn)
{
struct pipe *cpipe;
/*
* If a filter is requested that is not supported by this file
* descriptor, don't return an error, but also don't ever generate an
* event.
*/
if ((kn->kn_filter == EVFILT_READ) && !(fp->f_flag & FREAD)) {
kn->kn_fop = &pipe_nfiltops;
return (0);
}
if ((kn->kn_filter == EVFILT_WRITE) && !(fp->f_flag & FWRITE)) {
kn->kn_fop = &pipe_nfiltops;
return (0);
}
cpipe = fp->f_data;
PIPE_LOCK(cpipe);
switch (kn->kn_filter) {
case EVFILT_READ:
kn->kn_fop = &pipe_rfiltops;
break;
case EVFILT_WRITE:
kn->kn_fop = &pipe_wfiltops;
if (cpipe->pipe_peer->pipe_present != PIPE_ACTIVE) {
/* other end of pipe has been closed */
PIPE_UNLOCK(cpipe);
return (EPIPE);
}
cpipe = PIPE_PEER(cpipe);
break;
default:
PIPE_UNLOCK(cpipe);
return (EINVAL);
}
kn->kn_hook = cpipe;
knlist_add(&cpipe->pipe_sel.si_note, kn, 1);
PIPE_UNLOCK(cpipe);
return (0);
}
static void
filt_pipedetach(struct knote *kn)
{
struct pipe *cpipe = kn->kn_hook;
PIPE_LOCK(cpipe);
knlist_remove(&cpipe->pipe_sel.si_note, kn, 1);
PIPE_UNLOCK(cpipe);
}
/*ARGSUSED*/
static int
filt_piperead(struct knote *kn, long hint)
{
struct pipe *rpipe = kn->kn_hook;
struct pipe *wpipe = rpipe->pipe_peer;
int ret;
PIPE_LOCK_ASSERT(rpipe, MA_OWNED);
kn->kn_data = rpipe->pipe_buffer.cnt;
if ((kn->kn_data == 0) && (rpipe->pipe_state & PIPE_DIRECTW))
kn->kn_data = rpipe->pipe_map.cnt;
if ((rpipe->pipe_state & PIPE_EOF) ||
wpipe->pipe_present != PIPE_ACTIVE ||
(wpipe->pipe_state & PIPE_EOF)) {
kn->kn_flags |= EV_EOF;
return (1);
}
ret = kn->kn_data > 0;
return ret;
}
/*ARGSUSED*/
static int
filt_pipewrite(struct knote *kn, long hint)
{
struct pipe *wpipe;
wpipe = kn->kn_hook;
PIPE_LOCK_ASSERT(wpipe, MA_OWNED);
if (wpipe->pipe_present != PIPE_ACTIVE ||
(wpipe->pipe_state & PIPE_EOF)) {
kn->kn_data = 0;
2004-01-11 19:54:45 +00:00
kn->kn_flags |= EV_EOF;
return (1);
}
kn->kn_data = (wpipe->pipe_buffer.size > 0) ?
(wpipe->pipe_buffer.size - wpipe->pipe_buffer.cnt) : PIPE_BUF;
if (wpipe->pipe_state & PIPE_DIRECTW)
kn->kn_data = 0;
return (kn->kn_data >= PIPE_BUF);
}
static void
filt_pipedetach_notsup(struct knote *kn)
{
}
static int
filt_pipenotsup(struct knote *kn, long hint)
{
return (0);
}