d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d714b2c1ac
freebsd-dev/sys/dev/cxgbe/t4_sge.c

3400 lines
86 KiB
C
Raw Normal View History

cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*-
* Copyright (c) 2011 Chelsio Communications, Inc.
* All rights reserved.
* Written by: Navdeep Parhar <np@FreeBSD.org>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_inet.h"
#include <sys/types.h>
#include <sys/mbuf.h>
#include <sys/socket.h>
#include <sys/kernel.h>
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#include <sys/kdb.h>
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <sys/sysctl.h>
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#include <sys/smp.h>
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#include <net/bpf.h>
#include <net/ethernet.h>
#include <net/if.h>
#include <net/if_vlan_var.h>
#include <netinet/in.h>
#include <netinet/ip.h>
#include <netinet/tcp.h>
#include "common/common.h"
#include "common/t4_regs.h"
#include "common/t4_regs_values.h"
#include "common/t4_msg.h"
struct fl_buf_info {
int size;
int type;
uma_zone_t zone;
};
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
/* Filled up by t4_sge_modload */
static struct fl_buf_info fl_buf_info[FL_BUF_SIZES];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#define FL_BUF_SIZE(x) (fl_buf_info[x].size)
#define FL_BUF_TYPE(x) (fl_buf_info[x].type)
#define FL_BUF_ZONE(x) (fl_buf_info[x].zone)
enum {
FL_PKTSHIFT = 2
};
#define FL_ALIGN min(CACHE_LINE_SIZE, 32)
#if CACHE_LINE_SIZE > 64
#define SPG_LEN 128
#else
#define SPG_LEN 64
#endif
/* Used to track coalesced tx work request */
struct txpkts {
uint64_t *flitp; /* ptr to flit where next pkt should start */
uint8_t npkt; /* # of packets in this work request */
uint8_t nflits; /* # of flits used by this work request */
uint16_t plen; /* total payload (sum of all packets) */
};
/* A packet's SGL. This + m_pkthdr has all info needed for tx */
struct sgl {
int nsegs; /* # of segments in the SGL, 0 means imm. tx */
int nflits; /* # of flits needed for the SGL */
bus_dma_segment_t seg[TX_SGL_SEGS];
};
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int service_iq(struct sge_iq *, int);
static struct mbuf *get_fl_payload(struct adapter *, struct sge_fl *, uint32_t,
int *);
static int t4_eth_rx(struct sge_iq *, const struct rss_header *, struct mbuf *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static inline void init_iq(struct sge_iq *, struct adapter *, int, int, int,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int, char *);
static inline void init_fl(struct sge_fl *, int, int, char *);
static inline void init_eq(struct sge_eq *, int, int, uint8_t, uint16_t,
char *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int alloc_ring(struct adapter *, size_t, bus_dma_tag_t *, bus_dmamap_t *,
bus_addr_t *, void **);
static int free_ring(struct adapter *, bus_dma_tag_t, bus_dmamap_t, bus_addr_t,
void *);
static int alloc_iq_fl(struct port_info *, struct sge_iq *, struct sge_fl *,
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
int, int);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int free_iq_fl(struct port_info *, struct sge_iq *, struct sge_fl *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int alloc_fwq(struct adapter *);
static int free_fwq(struct adapter *);
static int alloc_mgmtq(struct adapter *);
static int free_mgmtq(struct adapter *);
static int alloc_rxq(struct port_info *, struct sge_rxq *, int, int,
struct sysctl_oid *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int free_rxq(struct port_info *, struct sge_rxq *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int alloc_ofld_rxq(struct port_info *, struct sge_ofld_rxq *, int, int,
struct sysctl_oid *);
static int free_ofld_rxq(struct port_info *, struct sge_ofld_rxq *);
#endif
static int ctrl_eq_alloc(struct adapter *, struct sge_eq *);
static int eth_eq_alloc(struct adapter *, struct port_info *, struct sge_eq *);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int ofld_eq_alloc(struct adapter *, struct port_info *, struct sge_eq *);
#endif
static int alloc_eq(struct adapter *, struct port_info *, struct sge_eq *);
static int free_eq(struct adapter *, struct sge_eq *);
static int alloc_wrq(struct adapter *, struct port_info *, struct sge_wrq *,
struct sysctl_oid *);
static int free_wrq(struct adapter *, struct sge_wrq *);
static int alloc_txq(struct port_info *, struct sge_txq *, int,
struct sysctl_oid *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int free_txq(struct port_info *, struct sge_txq *);
static void oneseg_dma_callback(void *, bus_dma_segment_t *, int, int);
static inline bool is_new_response(const struct sge_iq *, struct rsp_ctrl **);
static inline void iq_next(struct sge_iq *);
static inline void ring_fl_db(struct adapter *, struct sge_fl *);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int refill_fl(struct adapter *, struct sge_fl *, int);
static void refill_sfl(void *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int alloc_fl_sdesc(struct sge_fl *);
static void free_fl_sdesc(struct sge_fl *);
static void set_fl_tag_idx(struct sge_fl *, int);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static void add_fl_to_sfl(struct adapter *, struct sge_fl *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int get_pkt_sgl(struct sge_txq *, struct mbuf **, struct sgl *, int);
static int free_pkt_sgl(struct sge_txq *, struct sgl *);
static int write_txpkt_wr(struct port_info *, struct sge_txq *, struct mbuf *,
struct sgl *);
static int add_to_txpkts(struct port_info *, struct sge_txq *, struct txpkts *,
struct mbuf *, struct sgl *);
static void write_txpkts_wr(struct sge_txq *, struct txpkts *);
static inline void write_ulp_cpl_sgl(struct port_info *, struct sge_txq *,
struct txpkts *, struct mbuf *, struct sgl *);
static int write_sgl_to_txd(struct sge_eq *, struct sgl *, caddr_t *);
static inline void copy_to_txd(struct sge_eq *, caddr_t, caddr_t *, int);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static inline void ring_eq_db(struct adapter *, struct sge_eq *);
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
static inline int reclaimable(struct sge_eq *);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static int reclaim_tx_descs(struct sge_txq *, int, int);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static void write_eqflush_wr(struct sge_eq *);
static __be64 get_flit(bus_dma_segment_t *, int, int);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int handle_sge_egr_update(struct sge_iq *, const struct rss_header *,
struct mbuf *);
static int handle_fw_rpl(struct sge_iq *, const struct rss_header *,
struct mbuf *);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
static int sysctl_uint16(SYSCTL_HANDLER_ARGS);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
/*
* Called on MOD_LOAD and fills up fl_buf_info[].
*/
void
t4_sge_modload(void)
{
int i;
int bufsize[FL_BUF_SIZES] = {
MCLBYTES,
#if MJUMPAGESIZE != MCLBYTES
MJUMPAGESIZE,
#endif
MJUM9BYTES,
MJUM16BYTES
};
for (i = 0; i < FL_BUF_SIZES; i++) {
FL_BUF_SIZE(i) = bufsize[i];
FL_BUF_TYPE(i) = m_gettype(bufsize[i]);
FL_BUF_ZONE(i) = m_getzone(bufsize[i]);
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/**
* t4_sge_init - initialize SGE
* @sc: the adapter
*
* Performs SGE initialization needed every time after a chip reset.
* We do not initialize any of the queues here, instead the driver
* top-level must request them individually.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_sge_init(struct adapter *sc)
{
struct sge *s = &sc->sge;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int i, rc = 0;
uint32_t ctrl_mask, ctrl_val, hpsize, v;
ctrl_mask = V_PKTSHIFT(M_PKTSHIFT) | F_RXPKTCPLMODE |
V_INGPADBOUNDARY(M_INGPADBOUNDARY) |
F_EGRSTATUSPAGESIZE;
ctrl_val = V_PKTSHIFT(FL_PKTSHIFT) | F_RXPKTCPLMODE |
V_INGPADBOUNDARY(ilog2(FL_ALIGN) - 5) |
V_EGRSTATUSPAGESIZE(SPG_LEN == 128);
hpsize = V_HOSTPAGESIZEPF0(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF1(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF2(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF3(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF4(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF5(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF6(PAGE_SHIFT - 10) |
V_HOSTPAGESIZEPF7(PAGE_SHIFT - 10);
if (sc->flags & MASTER_PF) {
int intr_timer[SGE_NTIMERS] = {1, 5, 10, 50, 100, 200};
int intr_pktcount[SGE_NCOUNTERS] = {1, 8, 16, 32}; /* 63 max */
t4_set_reg_field(sc, A_SGE_CONTROL, ctrl_mask, ctrl_val);
t4_write_reg(sc, A_SGE_HOST_PAGE_SIZE, hpsize);
for (i = 0; i < FL_BUF_SIZES; i++) {
t4_write_reg(sc, A_SGE_FL_BUFFER_SIZE0 + (4 * i),
FL_BUF_SIZE(i));
}
t4_write_reg(sc, A_SGE_INGRESS_RX_THRESHOLD,
V_THRESHOLD_0(intr_pktcount[0]) |
V_THRESHOLD_1(intr_pktcount[1]) |
V_THRESHOLD_2(intr_pktcount[2]) |
V_THRESHOLD_3(intr_pktcount[3]));
t4_write_reg(sc, A_SGE_TIMER_VALUE_0_AND_1,
V_TIMERVALUE0(us_to_core_ticks(sc, intr_timer[0])) |
V_TIMERVALUE1(us_to_core_ticks(sc, intr_timer[1])));
t4_write_reg(sc, A_SGE_TIMER_VALUE_2_AND_3,
V_TIMERVALUE2(us_to_core_ticks(sc, intr_timer[2])) |
V_TIMERVALUE3(us_to_core_ticks(sc, intr_timer[3])));
t4_write_reg(sc, A_SGE_TIMER_VALUE_4_AND_5,
V_TIMERVALUE4(us_to_core_ticks(sc, intr_timer[4])) |
V_TIMERVALUE5(us_to_core_ticks(sc, intr_timer[5])));
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
v = t4_read_reg(sc, A_SGE_CONTROL);
if ((v & ctrl_mask) != ctrl_val) {
device_printf(sc->dev, "invalid SGE_CONTROL(0x%x)\n", v);
rc = EINVAL;
}
v = t4_read_reg(sc, A_SGE_HOST_PAGE_SIZE);
if (v != hpsize) {
device_printf(sc->dev, "invalid SGE_HOST_PAGE_SIZE(0x%x)\n", v);
rc = EINVAL;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for (i = 0; i < FL_BUF_SIZES; i++) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
v = t4_read_reg(sc, A_SGE_FL_BUFFER_SIZE0 + (4 * i));
if (v != FL_BUF_SIZE(i)) {
device_printf(sc->dev,
"invalid SGE_FL_BUFFER_SIZE[%d](0x%x)\n", i, v);
rc = EINVAL;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
v = t4_read_reg(sc, A_SGE_CONM_CTRL);
s->fl_starve_threshold = G_EGRTHRESHOLD(v) * 2 + 1;
v = t4_read_reg(sc, A_SGE_INGRESS_RX_THRESHOLD);
sc->sge.counter_val[0] = G_THRESHOLD_0(v);
sc->sge.counter_val[1] = G_THRESHOLD_1(v);
sc->sge.counter_val[2] = G_THRESHOLD_2(v);
sc->sge.counter_val[3] = G_THRESHOLD_3(v);
v = t4_read_reg(sc, A_SGE_TIMER_VALUE_0_AND_1);
sc->sge.timer_val[0] = G_TIMERVALUE0(v) / core_ticks_per_usec(sc);
sc->sge.timer_val[1] = G_TIMERVALUE1(v) / core_ticks_per_usec(sc);
v = t4_read_reg(sc, A_SGE_TIMER_VALUE_2_AND_3);
sc->sge.timer_val[2] = G_TIMERVALUE2(v) / core_ticks_per_usec(sc);
sc->sge.timer_val[3] = G_TIMERVALUE3(v) / core_ticks_per_usec(sc);
v = t4_read_reg(sc, A_SGE_TIMER_VALUE_4_AND_5);
sc->sge.timer_val[4] = G_TIMERVALUE4(v) / core_ticks_per_usec(sc);
sc->sge.timer_val[5] = G_TIMERVALUE5(v) / core_ticks_per_usec(sc);
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_register_cpl_handler(sc, CPL_FW4_MSG, handle_fw_rpl);
t4_register_cpl_handler(sc, CPL_FW6_MSG, handle_fw_rpl);
t4_register_cpl_handler(sc, CPL_SGE_EGR_UPDATE, handle_sge_egr_update);
t4_register_cpl_handler(sc, CPL_RX_PKT, t4_eth_rx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
int
t4_create_dma_tag(struct adapter *sc)
{
int rc;
rc = bus_dma_tag_create(bus_get_dma_tag(sc->dev), 1, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL, BUS_SPACE_MAXSIZE,
BUS_SPACE_UNRESTRICTED, BUS_SPACE_MAXSIZE, BUS_DMA_ALLOCNOW, NULL,
NULL, &sc->dmat);
if (rc != 0) {
device_printf(sc->dev,
"failed to create main DMA tag: %d\n", rc);
}
return (rc);
}
int
t4_destroy_dma_tag(struct adapter *sc)
{
if (sc->dmat)
bus_dma_tag_destroy(sc->dmat);
return (0);
}
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Allocate and initialize the firmware event queue and the management queue.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*
* Returns errno on failure. Resources allocated up to that point may still be
* allocated. Caller is responsible for cleanup in case this function fails.
*/
int
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
t4_setup_adapter_queues(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sysctl_ctx_init(&sc->ctx);
sc->flags |= ADAP_SYSCTL_CTX;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
/*
* Firmware event queue
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = alloc_fwq(sc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to create firmware event queue: %d\n", rc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
}
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Management queue. This is just a control queue that uses the fwq as
* its associated iq.
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = alloc_mgmtq(sc);
if (rc != 0) {
device_printf(sc->dev,
"failed to create management queue: %d\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
return (rc);
}
/*
* Idempotent
*/
int
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
t4_teardown_adapter_queues(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
ADAPTER_LOCK_ASSERT_NOTOWNED(sc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Do this before freeing the queue */
if (sc->flags & ADAP_SYSCTL_CTX) {
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
sysctl_ctx_free(&sc->ctx);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
sc->flags &= ~ADAP_SYSCTL_CTX;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_mgmtq(sc);
free_fwq(sc);
return (0);
}
static inline int
first_vector(struct port_info *pi)
{
struct adapter *sc = pi->adapter;
int rc = T4_EXTRA_INTR, i;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->intr_count == 1)
return (0);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_port(sc, i) {
if (i == pi->port_id)
break;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->flags & INTR_DIRECT)
rc += pi->nrxq + pi->nofldrxq;
else
rc += max(pi->nrxq, pi->nofldrxq);
#else
/*
* Not compiled with offload support and intr_count > 1. Only
* NIC queues exist and they'd better be taking direct
* interrupts.
*/
KASSERT(sc->flags & INTR_DIRECT,
("%s: intr_count %d, !INTR_DIRECT", __func__,
sc->intr_count));
rc += pi->nrxq;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (rc);
}
/*
* Given an arbitrary "index," come up with an iq that can be used by other
* queues (of this port) for interrupt forwarding, SGE egress updates, etc.
* The iq returned is guaranteed to be something that takes direct interrupts.
*/
static struct sge_iq *
port_intr_iq(struct port_info *pi, int idx)
{
struct adapter *sc = pi->adapter;
struct sge *s = &sc->sge;
struct sge_iq *iq = NULL;
if (sc->intr_count == 1)
return (&sc->sge.fwq);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (sc->flags & INTR_DIRECT) {
idx %= pi->nrxq + pi->nofldrxq;
if (idx >= pi->nrxq) {
idx -= pi->nrxq;
iq = &s->ofld_rxq[pi->first_ofld_rxq + idx].iq;
} else
iq = &s->rxq[pi->first_rxq + idx].iq;
} else {
idx %= max(pi->nrxq, pi->nofldrxq);
if (pi->nrxq >= pi->nofldrxq)
iq = &s->rxq[pi->first_rxq + idx].iq;
else
iq = &s->ofld_rxq[pi->first_ofld_rxq + idx].iq;
}
#else
/*
* Not compiled with offload support and intr_count > 1. Only NIC
* queues exist and they'd better be taking direct interrupts.
*/
KASSERT(sc->flags & INTR_DIRECT,
("%s: intr_count %d, !INTR_DIRECT", __func__, sc->intr_count));
idx %= pi->nrxq;
iq = &s->rxq[pi->first_rxq + idx].iq;
#endif
KASSERT(iq->flags & IQ_INTR, ("%s: EDOOFUS", __func__));
return (iq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_setup_port_queues(struct port_info *pi)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc = 0, i, j, intr_idx, iqid;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sge_rxq *rxq;
struct sge_txq *txq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_wrq *ctrlq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
struct sge_wrq *ofld_txq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct sysctl_oid *oid2 = NULL;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
char name[16];
struct adapter *sc = pi->adapter;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct sysctl_oid *oid = device_get_sysctl_tree(pi->dev);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "rxq", CTLFLAG_RD,
NULL, "rx queues");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (is_offload(sc)) {
oid2 = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "ofld_rxq",
CTLFLAG_RD, NULL,
"rx queues for offloaded TCP connections");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Interrupt vector to start from (when using multiple vectors) */
intr_idx = first_vector(pi);
/*
* First pass over all rx queues (NIC and TOE):
* a) initialize iq and fl
* b) allocate queue iff it will take direct interrupts.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_rxq(pi, i, rxq) {
snprintf(name, sizeof(name), "%s rxq%d-iq",
device_get_nameunit(pi->dev), i);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
init_iq(&rxq->iq, sc, pi->tmr_idx, pi->pktc_idx, pi->qsize_rxq,
RX_IQ_ESIZE, name);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%s rxq%d-fl",
device_get_nameunit(pi->dev), i);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
init_fl(&rxq->fl, pi->qsize_rxq / 8, pi->ifp->if_mtu, name);
if (sc->flags & INTR_DIRECT
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
|| (sc->intr_count > 1 && pi->nrxq >= pi->nofldrxq)
#endif
) {
rxq->iq.flags |= IQ_INTR;
rc = alloc_rxq(pi, rxq, intr_idx, i, oid);
if (rc != 0)
goto done;
intr_idx++;
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_rxq(pi, i, ofld_rxq) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s ofld_rxq%d-iq",
device_get_nameunit(pi->dev), i);
init_iq(&ofld_rxq->iq, sc, pi->tmr_idx, pi->pktc_idx,
pi->qsize_rxq, RX_IQ_ESIZE, name);
snprintf(name, sizeof(name), "%s ofld_rxq%d-fl",
device_get_nameunit(pi->dev), i);
init_fl(&ofld_rxq->fl, pi->qsize_rxq / 8, MJUM16BYTES, name);
if (sc->flags & INTR_DIRECT ||
(sc->intr_count > 1 && pi->nofldrxq > pi->nrxq)) {
ofld_rxq->iq.flags |= IQ_INTR;
rc = alloc_ofld_rxq(pi, ofld_rxq, intr_idx, i, oid2);
if (rc != 0)
goto done;
intr_idx++;
}
}
#endif
/*
* Second pass over all rx queues (NIC and TOE). The queues forwarding
* their interrupts are allocated now.
*/
j = 0;
for_each_rxq(pi, i, rxq) {
if (rxq->iq.flags & IQ_INTR)
continue;
intr_idx = port_intr_iq(pi, j)->abs_id;
rc = alloc_rxq(pi, rxq, intr_idx, i, oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
goto done;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
j++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_rxq(pi, i, ofld_rxq) {
if (ofld_rxq->iq.flags & IQ_INTR)
continue;
intr_idx = port_intr_iq(pi, j)->abs_id;
rc = alloc_ofld_rxq(pi, ofld_rxq, intr_idx, i, oid2);
if (rc != 0)
goto done;
j++;
}
#endif
/*
* Now the tx queues. Only one pass needed.
*/
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "txq", CTLFLAG_RD,
NULL, "tx queues");
j = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_txq(pi, i, txq) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
uint16_t iqid;
iqid = port_intr_iq(pi, j)->cntxt_id;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%s txq%d",
device_get_nameunit(pi->dev), i);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
init_eq(&txq->eq, EQ_ETH, pi->qsize_txq, pi->tx_chan, iqid,
name);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = alloc_txq(pi, txq, i, oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
goto done;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
j++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "ofld_txq",
CTLFLAG_RD, NULL, "tx queues for offloaded TCP connections");
for_each_ofld_txq(pi, i, ofld_txq) {
uint16_t iqid;
iqid = port_intr_iq(pi, j)->cntxt_id;
snprintf(name, sizeof(name), "%s ofld_txq%d",
device_get_nameunit(pi->dev), i);
init_eq(&ofld_txq->eq, EQ_OFLD, pi->qsize_txq, pi->tx_chan,
iqid, name);
snprintf(name, sizeof(name), "%d", i);
oid2 = SYSCTL_ADD_NODE(&pi->ctx, SYSCTL_CHILDREN(oid), OID_AUTO,
name, CTLFLAG_RD, NULL, "offload tx queue");
rc = alloc_wrq(sc, pi, ofld_txq, oid2);
if (rc != 0)
goto done;
j++;
}
#endif
/*
* Finally, the control queue.
*/
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "ctrlq", CTLFLAG_RD,
NULL, "ctrl queue");
ctrlq = &sc->sge.ctrlq[pi->port_id];
iqid = port_intr_iq(pi, 0)->cntxt_id;
snprintf(name, sizeof(name), "%s ctrlq", device_get_nameunit(pi->dev));
init_eq(&ctrlq->eq, EQ_CTRL, CTRL_EQ_QSIZE, pi->tx_chan, iqid, name);
rc = alloc_wrq(sc, pi, ctrlq, oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
done:
if (rc)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_teardown_port_queues(pi);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
/*
* Idempotent
*/
int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
t4_teardown_port_queues(struct port_info *pi)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int i;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct adapter *sc = pi->adapter;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct sge_rxq *rxq;
struct sge_txq *txq;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_ofld_rxq *ofld_rxq;
struct sge_wrq *ofld_txq;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Do this before freeing the queues */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (pi->flags & PORT_SYSCTL_CTX) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sysctl_ctx_free(&pi->ctx);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
pi->flags &= ~PORT_SYSCTL_CTX;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Take down all the tx queues first, as they reference the rx queues
* (for egress updates, etc.).
*/
free_wrq(sc, &sc->sge.ctrlq[pi->port_id]);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_txq(pi, i, txq) {
free_txq(pi, txq);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_txq(pi, i, ofld_txq) {
free_wrq(sc, ofld_txq);
}
#endif
/*
* Then take down the rx queues that forward their interrupts, as they
* reference other rx queues.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_rxq(pi, i, rxq) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if ((rxq->iq.flags & IQ_INTR) == 0)
free_rxq(pi, rxq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_rxq(pi, i, ofld_rxq) {
if ((ofld_rxq->iq.flags & IQ_INTR) == 0)
free_ofld_rxq(pi, ofld_rxq);
}
#endif
/*
* Then take down the rx queues that take direct interrupts.
*/
for_each_rxq(pi, i, rxq) {
if (rxq->iq.flags & IQ_INTR)
free_rxq(pi, rxq);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
for_each_ofld_rxq(pi, i, ofld_rxq) {
if (ofld_rxq->iq.flags & IQ_INTR)
free_ofld_rxq(pi, ofld_rxq);
}
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Deals with errors and the firmware event queue. All data rx queues forward
* their interrupt to the firmware event queue.
*/
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
void
t4_intr_all(void *arg)
{
struct adapter *sc = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_iq *fwq = &sc->sge.fwq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_intr_err(arg);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&fwq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(fwq, 0);
atomic_cmpset_int(&fwq->state, IQS_BUSY, IQS_IDLE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
}
/* Deals with error interrupts */
void
t4_intr_err(void *arg)
{
struct adapter *sc = arg;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
t4_write_reg(sc, MYPF_REG(A_PCIE_PF_CLI), 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_slow_intr_handler(sc);
}
void
t4_intr_evt(void *arg)
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
{
struct sge_iq *iq = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&iq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(iq, 0);
atomic_cmpset_int(&iq->state, IQS_BUSY, IQS_IDLE);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
Fix a couple of bad races that can occur when a cxgbe interface is taken down. The ingress queue lock was unused and has been removed as part of these changes. - An in-flight egress update from the SGE must be handled before the queue that requested it is destroyed. Wait for the update to arrive. - Interrupt handlers must stop processing rx events for a queue before the queue is destroyed. Events that have not yet been processed should be ignored once the queue disappears. MFC after: 1 week
2011-04-15 03:09:27 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
void
t4_intr(void *arg)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct sge_iq *iq = arg;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (atomic_cmpset_int(&iq->state, IQS_IDLE, IQS_BUSY)) {
service_iq(iq, 0);
atomic_cmpset_int(&iq->state, IQS_BUSY, IQS_IDLE);
}
}
/*
* Deals with anything and everything on the given ingress queue.
*/
static int
service_iq(struct sge_iq *iq, int budget)
{
struct sge_iq *q;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
struct sge_rxq *rxq = iq_to_rxq(iq); /* Use iff iq is part of rxq */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_fl *fl = &rxq->fl; /* Use iff IQ_HAS_FL */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = iq->adapter;
struct rsp_ctrl *ctrl;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
const struct rss_header *rss;
int ndescs = 0, limit, fl_bufs_used = 0;
int rsp_type;
uint32_t lq;
struct mbuf *m0;
STAILQ_HEAD(, sge_iq) iql = STAILQ_HEAD_INITIALIZER(iql);
limit = budget ? budget : iq->qsize / 8;
KASSERT(iq->state == IQS_BUSY, ("%s: iq %p not BUSY", __func__, iq));
/*
* We always come back and check the descriptor ring for new indirect
* interrupts and other responses after running a single handler.
*/
for (;;) {
while (is_new_response(iq, &ctrl)) {
rmb();
m0 = NULL;
rsp_type = G_RSPD_TYPE(ctrl->u.type_gen);
lq = be32toh(ctrl->pldbuflen_qid);
rss = (const void *)iq->cdesc;
switch (rsp_type) {
case X_RSPD_TYPE_FLBUF:
KASSERT(iq->flags & IQ_HAS_FL,
("%s: data for an iq (%p) with no freelist",
__func__, iq));
m0 = get_fl_payload(sc, fl, lq, &fl_bufs_used);
#ifdef T4_PKT_TIMESTAMP
/*
* 60 bit timestamp for the payload is
* *(uint64_t *)m0->m_pktdat. Note that it is
* in the leading free-space in the mbuf. The
* kernel can clobber it during a pullup,
* m_copymdata, etc. You need to make sure that
* the mbuf reaches you unmolested if you care
* about the timestamp.
*/
*(uint64_t *)m0->m_pktdat =
be64toh(ctrl->u.last_flit) &
0xfffffffffffffff;
#endif
/* fall through */
case X_RSPD_TYPE_CPL:
KASSERT(rss->opcode < NUM_CPL_CMDS,
("%s: bad opcode %02x.", __func__,
rss->opcode));
sc->cpl_handler[rss->opcode](iq, rss, m0);
break;
case X_RSPD_TYPE_INTR:
/*
* Interrupts should be forwarded only to queues
* that are not forwarding their interrupts.
* This means service_iq can recurse but only 1
* level deep.
*/
KASSERT(budget == 0,
("%s: budget %u, rsp_type %u", __func__,
budget, rsp_type));
q = sc->sge.iqmap[lq - sc->sge.iq_start];
if (atomic_cmpset_int(&q->state, IQS_IDLE,
IQS_BUSY)) {
if (service_iq(q, q->qsize / 8) == 0) {
atomic_cmpset_int(&q->state,
IQS_BUSY, IQS_IDLE);
} else {
STAILQ_INSERT_TAIL(&iql, q,
link);
}
}
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
default:
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
sc->an_handler(iq, ctrl);
break;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iq_next(iq);
if (++ndescs == limit) {
t4_write_reg(sc, MYPF_REG(A_SGE_PF_GTS),
V_CIDXINC(ndescs) |
V_INGRESSQID(iq->cntxt_id) |
V_SEINTARM(V_QINTR_TIMER_IDX(X_TIMERREG_UPDATE_CIDX)));
ndescs = 0;
if (fl_bufs_used > 0) {
FL_LOCK(fl);
fl->needed += fl_bufs_used;
refill_fl(sc, fl, fl->cap / 8);
FL_UNLOCK(fl);
fl_bufs_used = 0;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (budget)
return (EINPROGRESS);
}
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (STAILQ_EMPTY(&iql))
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Process the head only, and send it to the back of the list if
* it's still not done.
*/
q = STAILQ_FIRST(&iql);
STAILQ_REMOVE_HEAD(&iql, link);
if (service_iq(q, q->qsize / 8) == 0)
atomic_cmpset_int(&q->state, IQS_BUSY, IQS_IDLE);
else
STAILQ_INSERT_TAIL(&iql, q, link);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef INET
if (iq->flags & IQ_LRO_ENABLED) {
struct lro_ctrl *lro = &rxq->lro;
struct lro_entry *l;
while (!SLIST_EMPTY(&lro->lro_active)) {
l = SLIST_FIRST(&lro->lro_active);
SLIST_REMOVE_HEAD(&lro->lro_active, next);
tcp_lro_flush(lro, l);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
#endif
t4_write_reg(sc, MYPF_REG(A_SGE_PF_GTS), V_CIDXINC(ndescs) |
V_INGRESSQID((u32)iq->cntxt_id) | V_SEINTARM(iq->intr_params));
if (iq->flags & IQ_HAS_FL) {
int starved;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
FL_LOCK(fl);
fl->needed += fl_bufs_used;
starved = refill_fl(sc, fl, fl->cap / 4);
FL_UNLOCK(fl);
if (__predict_false(starved != 0))
add_fl_to_sfl(sc, fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
T4 packet timestamps. Reference code that shows how to get a packet's timestamp out of cxgbe(4). Disabled by default because we don't have a standard way today to pass this information up the stack. The timestamp is 60 bits wide and each increment represents 1 tick of the T4's core clock. As an example, the timestamp granularity is ~4.4ns for this card: # sysctl dev.t4nex.0.core_clock dev.t4nex.0.core_clock: 228125 MFC after: 1 week
2011-05-05 02:38:08 +00:00
#ifdef T4_PKT_TIMESTAMP
#define RX_COPY_THRESHOLD (MINCLSIZE - 8)
#else
#define RX_COPY_THRESHOLD MINCLSIZE
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static struct mbuf *
get_fl_payload(struct adapter *sc, struct sge_fl *fl, uint32_t len_newbuf,
int *fl_bufs_used)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct mbuf *m0, *m;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct fl_sdesc *sd = &fl->sdesc[fl->cidx];
unsigned int nbuf, len;
/*
* No assertion for the fl lock because we don't need it. This routine
* is called only from the rx interrupt handler and it only updates
* fl->cidx. (Contrast that with fl->pidx/fl->needed which could be
* updated in the rx interrupt handler or the starvation helper routine.
* That's why code that manipulates fl->pidx/fl->needed needs the fl
* lock but this routine does not).
*/
if (__predict_false((len_newbuf & F_RSPD_NEWBUF) == 0))
panic("%s: cannot handle packed frames", __func__);
len = G_RSPD_LEN(len_newbuf);
m0 = sd->m;
sd->m = NULL; /* consumed */
bus_dmamap_sync(fl->tag[sd->tag_idx], sd->map, BUS_DMASYNC_POSTREAD);
m_init(m0, NULL, 0, M_NOWAIT, MT_DATA, M_PKTHDR);
#ifdef T4_PKT_TIMESTAMP
/* Leave room for a timestamp */
m0->m_data += 8;
#endif
if (len < RX_COPY_THRESHOLD) {
/* copy data to mbuf, buffer will be recycled */
bcopy(sd->cl, mtod(m0, caddr_t), len);
m0->m_len = len;
} else {
bus_dmamap_unload(fl->tag[sd->tag_idx], sd->map);
m_cljset(m0, sd->cl, FL_BUF_TYPE(sd->tag_idx));
sd->cl = NULL; /* consumed */
m0->m_len = min(len, FL_BUF_SIZE(sd->tag_idx));
}
m0->m_pkthdr.len = len;
sd++;
if (__predict_false(++fl->cidx == fl->cap)) {
sd = fl->sdesc;
fl->cidx = 0;
}
m = m0;
len -= m->m_len;
nbuf = 1; /* # of fl buffers used */
while (len > 0) {
m->m_next = sd->m;
sd->m = NULL; /* consumed */
m = m->m_next;
bus_dmamap_sync(fl->tag[sd->tag_idx], sd->map,
BUS_DMASYNC_POSTREAD);
m_init(m, NULL, 0, M_NOWAIT, MT_DATA, 0);
if (len <= MLEN) {
bcopy(sd->cl, mtod(m, caddr_t), len);
m->m_len = len;
} else {
bus_dmamap_unload(fl->tag[sd->tag_idx],
sd->map);
m_cljset(m, sd->cl, FL_BUF_TYPE(sd->tag_idx));
sd->cl = NULL; /* consumed */
m->m_len = min(len, FL_BUF_SIZE(sd->tag_idx));
}
sd++;
if (__predict_false(++fl->cidx == fl->cap)) {
sd = fl->sdesc;
fl->cidx = 0;
}
len -= m->m_len;
nbuf++;
}
(*fl_bufs_used) += nbuf;
return (m0);
}
static int
t4_eth_rx(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m0)
{
Do not allocate extra vectors when adapter is not TOE capable (or toecaps have been disallowed by the user). + one very minor unrelated cleanup in t4_sge.c
2012-06-22 22:59:42 +00:00
struct sge_rxq *rxq = iq_to_rxq(iq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct ifnet *ifp = rxq->ifp;
const struct cpl_rx_pkt *cpl = (const void *)(rss + 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#ifdef INET
struct lro_ctrl *lro = &rxq->lro;
#endif
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m0 != NULL, ("%s: no payload with opcode %02x", __func__,
rss->opcode));
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
m0->m_pkthdr.len -= FL_PKTSHIFT;
m0->m_len -= FL_PKTSHIFT;
m0->m_data += FL_PKTSHIFT;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
m0->m_pkthdr.rcvif = ifp;
m0->m_flags |= M_FLOWID;
m0->m_pkthdr.flowid = rss->hash_val;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cpl->csum_calc && !cpl->err_vec &&
ifp->if_capenable & IFCAP_RXCSUM) {
m0->m_pkthdr.csum_flags |= (CSUM_IP_CHECKED |
CSUM_IP_VALID | CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
if (cpl->ip_frag)
m0->m_pkthdr.csum_data = be16toh(cpl->csum);
else
m0->m_pkthdr.csum_data = 0xffff;
rxq->rxcsum++;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cpl->vlan_ex) {
m0->m_pkthdr.ether_vtag = be16toh(cpl->vlan);
m0->m_flags |= M_VLANTAG;
rxq->vlan_extraction++;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef INET
if (cpl->l2info & htobe32(F_RXF_LRO) &&
iq->flags & IQ_LRO_ENABLED &&
tcp_lro_rx(lro, m0, 0) == 0) {
/* queued for LRO */
} else
#endif
ifp->if_input(ifp, m0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* Doesn't fail. Holds on to work requests it can't send right away.
*/
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
void
t4_wrq_tx_locked(struct adapter *sc, struct sge_wrq *wrq, struct wrqe *wr)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
{
struct sge_eq *eq = &wrq->eq;
int can_reclaim;
caddr_t dst;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TXQ_LOCK_ASSERT_OWNED(wrq);
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT((eq->flags & EQ_TYPEMASK) == EQ_OFLD ||
(eq->flags & EQ_TYPEMASK) == EQ_CTRL,
("%s: eq type %d", __func__, eq->flags & EQ_TYPEMASK));
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#else
KASSERT((eq->flags & EQ_TYPEMASK) == EQ_CTRL,
("%s: eq type %d", __func__, eq->flags & EQ_TYPEMASK));
#endif
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (__predict_true(wr != NULL))
STAILQ_INSERT_TAIL(&wrq->wr_list, wr, link);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
can_reclaim = reclaimable(eq);
if (__predict_false(eq->flags & EQ_STALLED)) {
if (can_reclaim < tx_resume_threshold(eq))
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
return;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags &= ~EQ_STALLED;
eq->unstalled++;
}
eq->cidx += can_reclaim;
eq->avail += can_reclaim;
if (__predict_false(eq->cidx >= eq->cap))
eq->cidx -= eq->cap;
T4 packet timestamps. Reference code that shows how to get a packet's timestamp out of cxgbe(4). Disabled by default because we don't have a standard way today to pass this information up the stack. The timestamp is 60 bits wide and each increment represents 1 tick of the T4's core clock. As an example, the timestamp granularity is ~4.4ns for this card: # sysctl dev.t4nex.0.core_clock dev.t4nex.0.core_clock: 228125 MFC after: 1 week
2011-05-05 02:38:08 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
while ((wr = STAILQ_FIRST(&wrq->wr_list)) != NULL) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int ndesc;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (__predict_false(wr->wr_len < 0 ||
wr->wr_len > SGE_MAX_WR_LEN || (wr->wr_len & 0x7))) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#ifdef INVARIANTS
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
panic("%s: work request with length %d", __func__,
wr->wr_len);
T4 packet timestamps. Reference code that shows how to get a packet's timestamp out of cxgbe(4). Disabled by default because we don't have a standard way today to pass this information up the stack. The timestamp is 60 bits wide and each increment represents 1 tick of the T4's core clock. As an example, the timestamp granularity is ~4.4ns for this card: # sysctl dev.t4nex.0.core_clock dev.t4nex.0.core_clock: 228125 MFC after: 1 week
2011-05-05 02:38:08 +00:00
#endif
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef KDB
kdb_backtrace();
#endif
log(LOG_ERR, "%s: %s work request with length %d",
device_get_nameunit(sc->dev), __func__, wr->wr_len);
STAILQ_REMOVE_HEAD(&wrq->wr_list, link);
free_wrqe(wr);
continue;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
ndesc = howmany(wr->wr_len, EQ_ESIZE);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->avail < ndesc) {
wrq->no_desc++;
break;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
dst = (void *)&eq->desc[eq->pidx];
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
copy_to_txd(eq, wrtod(wr), &dst, wr->wr_len);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->pidx += ndesc;
eq->avail -= ndesc;
if (__predict_false(eq->pidx >= eq->cap))
eq->pidx -= eq->cap;
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->pending += ndesc;
if (eq->pending > 16)
ring_eq_db(sc, eq);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
wrq->tx_wrs++;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
STAILQ_REMOVE_HEAD(&wrq->wr_list, link);
free_wrqe(wr);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->avail < 8) {
can_reclaim = reclaimable(eq);
eq->cidx += can_reclaim;
eq->avail += can_reclaim;
if (__predict_false(eq->cidx >= eq->cap))
eq->cidx -= eq->cap;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->pending)
ring_eq_db(sc, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (wr != NULL) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags |= EQ_STALLED;
if (callout_pending(&eq->tx_callout) == 0)
callout_reset(&eq->tx_callout, 1, t4_tx_callout, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Per-packet header in a coalesced tx WR, before the SGL starts (in flits) */
#define TXPKTS_PKT_HDR ((\
sizeof(struct ulp_txpkt) + \
sizeof(struct ulptx_idata) + \
sizeof(struct cpl_tx_pkt_core) \
) / 8)
/* Header of a coalesced tx WR, before SGL of first packet (in flits) */
#define TXPKTS_WR_HDR (\
sizeof(struct fw_eth_tx_pkts_wr) / 8 + \
TXPKTS_PKT_HDR)
/* Header of a tx WR, before SGL of first packet (in flits) */
#define TXPKT_WR_HDR ((\
sizeof(struct fw_eth_tx_pkt_wr) + \
sizeof(struct cpl_tx_pkt_core) \
) / 8 )
/* Header of a tx LSO WR, before SGL of first packet (in flits) */
#define TXPKT_LSO_WR_HDR ((\
sizeof(struct fw_eth_tx_pkt_wr) + \
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.
2012-06-22 07:51:15 +00:00
sizeof(struct cpl_tx_pkt_lso_core) + \
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sizeof(struct cpl_tx_pkt_core) \
) / 8 )
int
t4_eth_tx(struct ifnet *ifp, struct sge_txq *txq, struct mbuf *m)
{
struct port_info *pi = (void *)ifp->if_softc;
struct adapter *sc = pi->adapter;
struct sge_eq *eq = &txq->eq;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
struct buf_ring *br = txq->br;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct mbuf *next;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
int rc, coalescing, can_reclaim;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct txpkts txpkts;
struct sgl sgl;
TXQ_LOCK_ASSERT_OWNED(txq);
KASSERT(m, ("%s: called with nothing to do.", __func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT((eq->flags & EQ_TYPEMASK) == EQ_ETH,
("%s: eq type %d", __func__, eq->flags & EQ_TYPEMASK));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
prefetch(&eq->desc[eq->pidx]);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
prefetch(&txq->sdesc[eq->pidx]);
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txpkts.npkt = 0;/* indicates there's nothing in txpkts */
coalescing = 0;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
can_reclaim = reclaimable(eq);
if (__predict_false(eq->flags & EQ_STALLED)) {
if (can_reclaim < tx_resume_threshold(eq)) {
txq->m = m;
return (0);
}
eq->flags &= ~EQ_STALLED;
eq->unstalled++;
}
if (__predict_false(eq->flags & EQ_DOOMED)) {
m_freem(m);
while ((m = buf_ring_dequeue_sc(txq->br)) != NULL)
m_freem(m);
return (ENETDOWN);
}
if (eq->avail < 8 && can_reclaim)
reclaim_tx_descs(txq, can_reclaim, 32);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for (; m; m = next ? next : drbr_dequeue(ifp, br)) {
if (eq->avail < 8)
break;
next = m->m_nextpkt;
m->m_nextpkt = NULL;
if (next || buf_ring_peek(br))
coalescing = 1;
rc = get_pkt_sgl(txq, &m, &sgl, coalescing);
if (rc != 0) {
if (rc == ENOMEM) {
/* Short of resources, suspend tx */
m->m_nextpkt = next;
break;
}
/*
* Unrecoverable error for this packet, throw it away
* and move on to the next. get_pkt_sgl may already
* have freed m (it will be NULL in that case and the
* m_freem here is still safe).
*/
m_freem(m);
continue;
}
if (coalescing &&
add_to_txpkts(pi, txq, &txpkts, m, &sgl) == 0) {
/* Successfully absorbed into txpkts */
write_ulp_cpl_sgl(pi, txq, &txpkts, m, &sgl);
goto doorbell;
}
/*
* We weren't coalescing to begin with, or current frame could
* not be coalesced (add_to_txpkts flushes txpkts if a frame
* given to it can't be coalesced). Either way there should be
* nothing in txpkts.
*/
KASSERT(txpkts.npkt == 0,
("%s: txpkts not empty: %d", __func__, txpkts.npkt));
/* We're sending out individual packets now */
coalescing = 0;
if (eq->avail < 8)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
reclaim_tx_descs(txq, 0, 8);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = write_txpkt_wr(pi, txq, m, &sgl);
if (rc != 0) {
/* Short of hardware descriptors, suspend tx */
/*
* This is an unlikely but expensive failure. We've
* done all the hard work (DMA mappings etc.) and now we
* can't send out the packet. What's worse, we have to
* spend even more time freeing up everything in sgl.
*/
txq->no_desc++;
free_pkt_sgl(txq, &sgl);
m->m_nextpkt = next;
break;
}
ETHER_BPF_MTAP(ifp, m);
if (sgl.nsegs == 0)
m_freem(m);
doorbell:
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->pending >= 64)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
ring_eq_db(sc, eq);
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
can_reclaim = reclaimable(eq);
if (can_reclaim >= 32)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
reclaim_tx_descs(txq, can_reclaim, 64);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
if (txpkts.npkt > 0)
write_txpkts_wr(txq, &txpkts);
/*
* m not NULL means there was an error but we haven't thrown it away.
* This can happen when we're short of tx descriptors (no_desc) or maybe
* even DMA maps (no_dmamap). Either way, a credit flush and reclaim
* will get things going again.
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (m && !(eq->flags & EQ_CRFLUSHED)) {
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
struct tx_sdesc *txsd = &txq->sdesc[eq->pidx];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* If EQ_CRFLUSHED is not set then we know we have at least one
* available descriptor because any WR that reduces eq->avail to
* 0 also sets EQ_CRFLUSHED.
*/
KASSERT(eq->avail > 0, ("%s: no space for eqflush.", __func__));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd->desc_used = 1;
txsd->credits = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
write_eqflush_wr(eq);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->m = m;
if (eq->pending)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
ring_eq_db(sc, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
reclaim_tx_descs(txq, 0, 128);
if (eq->flags & EQ_STALLED && callout_pending(&eq->tx_callout) == 0)
callout_reset(&eq->tx_callout, 1, t4_tx_callout, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
void
t4_update_fl_bufsize(struct ifnet *ifp)
{
struct port_info *pi = ifp->if_softc;
struct sge_rxq *rxq;
struct sge_fl *fl;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int i, bufsize;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* large enough for a frame even when VLAN extraction is disabled */
bufsize = FL_PKTSHIFT + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN +
ifp->if_mtu;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for_each_rxq(pi, i, rxq) {
fl = &rxq->fl;
FL_LOCK(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
set_fl_tag_idx(fl, bufsize);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
FL_UNLOCK(fl);
}
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int
can_resume_tx(struct sge_eq *eq)
{
return (reclaimable(eq) >= tx_resume_threshold(eq));
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static inline void
init_iq(struct sge_iq *iq, struct adapter *sc, int tmr_idx, int pktc_idx,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int qsize, int esize, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
KASSERT(tmr_idx >= 0 && tmr_idx < SGE_NTIMERS,
("%s: bad tmr_idx %d", __func__, tmr_idx));
KASSERT(pktc_idx < SGE_NCOUNTERS, /* -ve is ok, means don't use */
("%s: bad pktc_idx %d", __func__, pktc_idx));
iq->flags = 0;
iq->adapter = sc;
Change the default to not use packet counters to generate rx interrupts. Rely solely on the timer based mechanism. Update man page to reflect this change. MFC after: 1 week
2012-04-30 09:46:05 +00:00
iq->intr_params = V_QINTR_TIMER_IDX(tmr_idx);
iq->intr_pktc_idx = SGE_NCOUNTERS - 1;
if (pktc_idx >= 0) {
iq->intr_params |= F_QINTR_CNT_EN;
iq->intr_pktc_idx = pktc_idx;
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
iq->qsize = roundup(qsize, 16); /* See FW_IQ_CMD/iqsize */
iq->esize = max(esize, 16); /* See FW_IQ_CMD/iqesize */
strlcpy(iq->lockname, name, sizeof(iq->lockname));
}
static inline void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
init_fl(struct sge_fl *fl, int qsize, int bufsize, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
fl->qsize = qsize;
strlcpy(fl->lockname, name, sizeof(fl->lockname));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
set_fl_tag_idx(fl, bufsize);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static inline void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
init_eq(struct sge_eq *eq, int eqtype, int qsize, uint8_t tx_chan,
uint16_t iqid, char *name)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(tx_chan < NCHAN, ("%s: bad tx channel %d", __func__, tx_chan));
KASSERT(eqtype <= EQ_TYPEMASK, ("%s: bad qtype %d", __func__, eqtype));
eq->flags = eqtype & EQ_TYPEMASK;
eq->tx_chan = tx_chan;
eq->iqid = iqid;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
eq->qsize = qsize;
strlcpy(eq->lockname, name, sizeof(eq->lockname));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TASK_INIT(&eq->tx_task, 0, t4_tx_task, eq);
callout_init(&eq->tx_callout, CALLOUT_MPSAFE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
alloc_ring(struct adapter *sc, size_t len, bus_dma_tag_t *tag,
bus_dmamap_t *map, bus_addr_t *pa, void **va)
{
int rc;
rc = bus_dma_tag_create(sc->dmat, 512, 0, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, len, 1, len, 0, NULL, NULL, tag);
if (rc != 0) {
device_printf(sc->dev, "cannot allocate DMA tag: %d\n", rc);
goto done;
}
rc = bus_dmamem_alloc(*tag, va,
BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO, map);
if (rc != 0) {
device_printf(sc->dev, "cannot allocate DMA memory: %d\n", rc);
goto done;
}
rc = bus_dmamap_load(*tag, *map, *va, len, oneseg_dma_callback, pa, 0);
if (rc != 0) {
device_printf(sc->dev, "cannot load DMA map: %d\n", rc);
goto done;
}
done:
if (rc)
free_ring(sc, *tag, *map, *pa, *va);
return (rc);
}
static int
free_ring(struct adapter *sc, bus_dma_tag_t tag, bus_dmamap_t map,
bus_addr_t pa, void *va)
{
if (pa)
bus_dmamap_unload(tag, map);
if (va)
bus_dmamem_free(tag, va, map);
if (tag)
bus_dma_tag_destroy(tag);
return (0);
}
/*
* Allocates the ring for an ingress queue and an optional freelist. If the
* freelist is specified it will be allocated and then associated with the
* ingress queue.
*
* Returns errno on failure. Resources allocated up to that point may still be
* allocated. Caller is responsible for cleanup in case this function fails.
*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* If the ingress queue will take interrupts directly (iq->flags & IQ_INTR) then
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
* the intr_idx specifies the vector, starting from 0. Otherwise it specifies
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* the abs_id of the ingress queue to which its interrupts should be forwarded.
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
*/
static int
alloc_iq_fl(struct port_info *pi, struct sge_iq *iq, struct sge_fl *fl,
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
int intr_idx, int cong)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc, i, cntxt_id;
size_t len;
struct fw_iq_cmd c;
struct adapter *sc = iq->adapter;
__be32 v = 0;
len = iq->qsize * iq->esize;
rc = alloc_ring(sc, len, &iq->desc_tag, &iq->desc_map, &iq->ba,
(void **)&iq->desc);
if (rc != 0)
return (rc);
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_IQ_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_IQ_CMD_PFN(sc->pf) |
V_FW_IQ_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_IQ_CMD_ALLOC | F_FW_IQ_CMD_IQSTART |
FW_LEN16(c));
/* Special handling for firmware event queue */
if (iq == &sc->sge.fwq)
v |= F_FW_IQ_CMD_IQASYNCH;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (iq->flags & IQ_INTR) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(intr_idx < sc->intr_count,
("%s: invalid direct intr_idx %d", __func__, intr_idx));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
} else
v |= F_FW_IQ_CMD_IQANDST;
v |= V_FW_IQ_CMD_IQANDSTINDEX(intr_idx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.type_to_iqandstindex = htobe32(v |
V_FW_IQ_CMD_TYPE(FW_IQ_TYPE_FL_INT_CAP) |
V_FW_IQ_CMD_VIID(pi->viid) |
V_FW_IQ_CMD_IQANUD(X_UPDATEDELIVERY_INTERRUPT));
c.iqdroprss_to_iqesize = htobe16(V_FW_IQ_CMD_IQPCIECH(pi->tx_chan) |
F_FW_IQ_CMD_IQGTSMODE |
V_FW_IQ_CMD_IQINTCNTTHRESH(iq->intr_pktc_idx) |
V_FW_IQ_CMD_IQESIZE(ilog2(iq->esize) - 4));
c.iqsize = htobe16(iq->qsize);
c.iqaddr = htobe64(iq->ba);
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
if (cong >= 0)
c.iqns_to_fl0congen = htobe32(F_FW_IQ_CMD_IQFLINTCONGEN);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (fl) {
mtx_init(&fl->fl_lock, fl->lockname, NULL, MTX_DEF);
for (i = 0; i < FL_BUF_SIZES; i++) {
/*
* A freelist buffer must be 16 byte aligned as the SGE
* uses the low 4 bits of the bus addr to figure out the
* buffer size.
*/
rc = bus_dma_tag_create(sc->dmat, 16, 0,
BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
FL_BUF_SIZE(i), 1, FL_BUF_SIZE(i), BUS_DMA_ALLOCNOW,
NULL, NULL, &fl->tag[i]);
if (rc != 0) {
device_printf(sc->dev,
"failed to create fl DMA tag[%d]: %d\n",
i, rc);
return (rc);
}
}
len = fl->qsize * RX_FL_ESIZE;
rc = alloc_ring(sc, len, &fl->desc_tag, &fl->desc_map,
&fl->ba, (void **)&fl->desc);
if (rc)
return (rc);
/* Allocate space for one software descriptor per buffer. */
fl->cap = (fl->qsize - SPG_LEN / RX_FL_ESIZE) * 8;
FL_LOCK(fl);
rc = alloc_fl_sdesc(fl);
FL_UNLOCK(fl);
if (rc != 0) {
device_printf(sc->dev,
"failed to setup fl software descriptors: %d\n",
rc);
return (rc);
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
fl->needed = fl->cap;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
fl->lowat = roundup(sc->sge.fl_starve_threshold, 8);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Do not clobber the ingress queue's congestion setting. MFC after: 1 month
2011-12-14 05:34:23 +00:00
c.iqns_to_fl0congen |=
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
htobe32(V_FW_IQ_CMD_FL0HOSTFCMODE(X_HOSTFCMODE_NONE) |
F_FW_IQ_CMD_FL0FETCHRO | F_FW_IQ_CMD_FL0DATARO |
F_FW_IQ_CMD_FL0PADEN);
if (cong >= 0) {
c.iqns_to_fl0congen |=
htobe32(V_FW_IQ_CMD_FL0CNGCHMAP(cong) |
F_FW_IQ_CMD_FL0CONGCIF |
F_FW_IQ_CMD_FL0CONGEN);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
c.fl0dcaen_to_fl0cidxfthresh =
htobe16(V_FW_IQ_CMD_FL0FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_IQ_CMD_FL0FBMAX(X_FETCHBURSTMAX_512B));
c.fl0size = htobe16(fl->qsize);
c.fl0addr = htobe64(fl->ba);
}
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(sc->dev,
"failed to create ingress queue: %d\n", rc);
return (rc);
}
iq->cdesc = iq->desc;
iq->cidx = 0;
iq->gen = 1;
iq->intr_next = iq->intr_params;
iq->cntxt_id = be16toh(c.iqid);
iq->abs_id = be16toh(c.physiqid);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iq->flags |= IQ_ALLOCATED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cntxt_id = iq->cntxt_id - sc->sge.iq_start;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cntxt_id >= sc->sge.niq) {
panic ("%s: iq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.niq - 1);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->sge.iqmap[cntxt_id] = iq;
if (fl) {
fl->cntxt_id = be16toh(c.fl0id);
fl->pidx = fl->cidx = 0;
Fix an error while constructing the table that maps context id -> egress queue. MFC after: 1 day
2011-03-22 21:05:56 +00:00
cntxt_id = fl->cntxt_id - sc->sge.eq_start;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cntxt_id >= sc->sge.neq) {
panic("%s: fl->cntxt_id (%d) more than the max (%d)",
__func__, cntxt_id, sc->sge.neq - 1);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
sc->sge.eqmap[cntxt_id] = (void *)fl;
FL_LOCK(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/* Enough to make sure the SGE doesn't think it's starved */
refill_fl(sc, fl, fl->lowat);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
FL_UNLOCK(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
iq->flags |= IQ_HAS_FL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
/* Enable IQ interrupts */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
atomic_store_rel_int(&iq->state, IQS_IDLE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
t4_write_reg(sc, MYPF_REG(A_SGE_PF_GTS), V_SEINTARM(iq->intr_params) |
V_INGRESSQID(iq->cntxt_id));
return (0);
}
static int
free_iq_fl(struct port_info *pi, struct sge_iq *iq, struct sge_fl *fl)
{
int i, rc;
struct adapter *sc = iq->adapter;
device_t dev;
if (sc == NULL)
return (0); /* nothing to do */
dev = pi ? pi->dev : sc->dev;
if (iq->flags & IQ_ALLOCATED) {
rc = -t4_iq_free(sc, sc->mbox, sc->pf, 0,
FW_IQ_TYPE_FL_INT_CAP, iq->cntxt_id,
fl ? fl->cntxt_id : 0xffff, 0xffff);
if (rc != 0) {
device_printf(dev,
"failed to free queue %p: %d\n", iq, rc);
return (rc);
}
iq->flags &= ~IQ_ALLOCATED;
}
free_ring(sc, iq->desc_tag, iq->desc_map, iq->ba, iq->desc);
bzero(iq, sizeof(*iq));
if (fl) {
free_ring(sc, fl->desc_tag, fl->desc_map, fl->ba,
fl->desc);
if (fl->sdesc) {
FL_LOCK(fl);
free_fl_sdesc(fl);
FL_UNLOCK(fl);
}
if (mtx_initialized(&fl->fl_lock))
mtx_destroy(&fl->fl_lock);
for (i = 0; i < FL_BUF_SIZES; i++) {
if (fl->tag[i])
bus_dma_tag_destroy(fl->tag[i]);
}
bzero(fl, sizeof(*fl));
}
return (0);
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_fwq(struct adapter *sc)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc, intr_idx;
struct sge_iq *fwq = &sc->sge.fwq;
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
char name[16];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid *oid = device_get_sysctl_tree(sc->dev);
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s fwq", device_get_nameunit(sc->dev));
init_iq(fwq, sc, 0, 0, FW_IQ_QSIZE, FW_IQ_ESIZE, name);
fwq->flags |= IQ_INTR; /* always */
intr_idx = sc->intr_count > 1 ? 1 : 0;
rc = alloc_iq_fl(sc->port[0], fwq, NULL, intr_idx, -1);
if (rc != 0) {
device_printf(sc->dev,
"failed to create firmware event queue: %d\n", rc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
}
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&sc->ctx, children, OID_AUTO, "fwq", CTLFLAG_RD,
NULL, "firmware event queue");
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
children = SYSCTL_CHILDREN(oid);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_PROC(&sc->ctx, children, OID_AUTO, "abs_id",
CTLTYPE_INT | CTLFLAG_RD, &fwq->abs_id, 0, sysctl_uint16, "I",
"absolute id of the queue");
SYSCTL_ADD_PROC(&sc->ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &fwq->cntxt_id, 0, sysctl_uint16, "I",
"SGE context id of the queue");
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
SYSCTL_ADD_PROC(&sc->ctx, children, OID_AUTO, "cidx",
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
CTLTYPE_INT | CTLFLAG_RD, &fwq->cidx, 0, sysctl_uint16, "I",
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
"consumer index");
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_fwq(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return free_iq_fl(NULL, &sc->sge.fwq, NULL);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_mgmtq(struct adapter *sc)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
int rc;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sge_wrq *mgmtq = &sc->sge.mgmtq;
char name[16];
struct sysctl_oid *oid = device_get_sysctl_tree(sc->dev);
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
oid = SYSCTL_ADD_NODE(&sc->ctx, children, OID_AUTO, "mgmtq", CTLFLAG_RD,
NULL, "management queue");
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
snprintf(name, sizeof(name), "%s mgmtq", device_get_nameunit(sc->dev));
init_eq(&mgmtq->eq, EQ_CTRL, CTRL_EQ_QSIZE, sc->port[0]->tx_chan,
sc->sge.fwq.cntxt_id, name);
rc = alloc_wrq(sc, NULL, mgmtq, oid);
if (rc != 0) {
device_printf(sc->dev,
"failed to create management queue: %d\n", rc);
return (rc);
}
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_mgmtq(struct adapter *sc)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return free_wrq(sc, &sc->sge.mgmtq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_rxq(struct port_info *pi, struct sge_rxq *rxq, int intr_idx, int idx,
struct sysctl_oid *oid)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int rc;
struct sysctl_oid_list *children;
char name[16];
- Enable per-channel congestion notification. - Enable PCIe relaxed ordering for all egress queues and rx data buffers. MFC after: 3 days
2011-05-18 22:09:04 +00:00
rc = alloc_iq_fl(pi, &rxq->iq, &rxq->fl, intr_idx, 1 << pi->tx_chan);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
return (rc);
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
FL_LOCK(&rxq->fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
refill_fl(pi->adapter, &rxq->fl, rxq->fl.needed / 8);
Allow lazy fill up of freelists. MFC after: 3 days
2011-06-04 23:31:33 +00:00
FL_UNLOCK(&rxq->fl);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#ifdef INET
rc = tcp_lro_init(&rxq->lro);
if (rc != 0)
return (rc);
rxq->lro.ifp = pi->ifp; /* also indicates LRO init'ed */
if (pi->ifp->if_capenable & IFCAP_LRO)
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rxq->iq.flags |= IQ_LRO_ENABLED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
#endif
Store the ifnet rather than the port_info in each txq and rxq struct. MFC after: 1 week
2011-03-05 03:27:14 +00:00
rxq->ifp = pi->ifp;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
children = SYSCTL_CHILDREN(oid);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
snprintf(name, sizeof(name), "%d", idx);
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
NULL, "rx queue");
children = SYSCTL_CHILDREN(oid);
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "abs_id",
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
CTLTYPE_INT | CTLFLAG_RD, &rxq->iq.abs_id, 0, sysctl_uint16, "I",
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
"absolute id of the queue");
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &rxq->iq.cntxt_id, 0, sysctl_uint16, "I",
"SGE context id of the queue");
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &rxq->iq.cidx, 0, sysctl_uint16, "I",
"consumer index");
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
#ifdef INET
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_INT(&pi->ctx, children, OID_AUTO, "lro_queued", CTLFLAG_RD,
&rxq->lro.lro_queued, 0, NULL);
SYSCTL_ADD_INT(&pi->ctx, children, OID_AUTO, "lro_flushed", CTLFLAG_RD,
&rxq->lro.lro_flushed, 0, NULL);
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "rxcsum", CTLFLAG_RD,
&rxq->rxcsum, "# of times hardware assisted with checksum");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "vlan_extraction",
CTLFLAG_RD, &rxq->vlan_extraction,
"# of times hardware extracted 802.1Q tag");
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
children = SYSCTL_CHILDREN(oid);
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "fl", CTLFLAG_RD,
NULL, "freelist");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &rxq->fl.cntxt_id, 0, sysctl_uint16, "I",
"SGE context id of the queue");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "cidx", CTLFLAG_RD,
&rxq->fl.cidx, 0, "consumer index");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "pidx", CTLFLAG_RD,
&rxq->fl.pidx, 0, "producer index");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
free_rxq(struct port_info *pi, struct sge_rxq *rxq)
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
#ifdef INET
if (rxq->lro.ifp) {
tcp_lro_free(&rxq->lro);
rxq->lro.ifp = NULL;
}
#endif
rc = free_iq_fl(pi, &rxq->iq, &rxq->fl);
if (rc == 0)
bzero(rxq, sizeof(*rxq));
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
alloc_ofld_rxq(struct port_info *pi, struct sge_ofld_rxq *ofld_rxq,
int intr_idx, int idx, struct sysctl_oid *oid)
{
int rc;
struct sysctl_oid_list *children;
char name[16];
rc = alloc_iq_fl(pi, &ofld_rxq->iq, &ofld_rxq->fl, intr_idx,
1 << pi->tx_chan);
if (rc != 0)
return (rc);
children = SYSCTL_CHILDREN(oid);
snprintf(name, sizeof(name), "%d", idx);
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
NULL, "rx queue");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "abs_id",
CTLTYPE_INT | CTLFLAG_RD, &ofld_rxq->iq.abs_id, 0, sysctl_uint16,
"I", "absolute id of the queue");
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &ofld_rxq->iq.cntxt_id, 0, sysctl_uint16,
"I", "SGE context id of the queue");
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &ofld_rxq->iq.cidx, 0, sysctl_uint16, "I",
"consumer index");
children = SYSCTL_CHILDREN(oid);
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, "fl", CTLFLAG_RD,
NULL, "freelist");
children = SYSCTL_CHILDREN(oid);
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cntxt_id",
CTLTYPE_INT | CTLFLAG_RD, &ofld_rxq->fl.cntxt_id, 0, sysctl_uint16,
"I", "SGE context id of the queue");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "cidx", CTLFLAG_RD,
&ofld_rxq->fl.cidx, 0, "consumer index");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "pidx", CTLFLAG_RD,
&ofld_rxq->fl.pidx, 0, "producer index");
return (rc);
}
static int
free_ofld_rxq(struct port_info *pi, struct sge_ofld_rxq *ofld_rxq)
{
int rc;
rc = free_iq_fl(pi, &ofld_rxq->iq, &ofld_rxq->fl);
if (rc == 0)
bzero(ofld_rxq, sizeof(*ofld_rxq));
return (rc);
}
#endif
static int
ctrl_eq_alloc(struct adapter *sc, struct sge_eq *eq)
{
int rc, cntxt_id;
struct fw_eq_ctrl_cmd c;
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_EQ_CTRL_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_CTRL_CMD_PFN(sc->pf) |
V_FW_EQ_CTRL_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_EQ_CTRL_CMD_ALLOC |
F_FW_EQ_CTRL_CMD_EQSTART | FW_LEN16(c));
c.cmpliqid_eqid = htonl(V_FW_EQ_CTRL_CMD_CMPLIQID(eq->iqid)); /* XXX */
c.physeqid_pkd = htobe32(0);
c.fetchszm_to_iqid =
htobe32(V_FW_EQ_CTRL_CMD_HOSTFCMODE(X_HOSTFCMODE_STATUS_PAGE) |
V_FW_EQ_CTRL_CMD_PCIECHN(eq->tx_chan) |
F_FW_EQ_CTRL_CMD_FETCHRO | V_FW_EQ_CTRL_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize =
htobe32(V_FW_EQ_CTRL_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_EQ_CTRL_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
V_FW_EQ_CTRL_CMD_CIDXFTHRESH(X_CIDXFLUSHTHRESH_32) |
V_FW_EQ_CTRL_CMD_EQSIZE(eq->qsize));
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(sc->dev,
"failed to create control queue %d: %d\n", eq->tx_chan, rc);
return (rc);
}
eq->flags |= EQ_ALLOCATED;
eq->cntxt_id = G_FW_EQ_CTRL_CMD_EQID(be32toh(c.cmpliqid_eqid));
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
return (rc);
}
static int
eth_eq_alloc(struct adapter *sc, struct port_info *pi, struct sge_eq *eq)
{
int rc, cntxt_id;
struct fw_eq_eth_cmd c;
bzero(&c, sizeof(c));
c.op_to_vfn = htobe32(V_FW_CMD_OP(FW_EQ_ETH_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_ETH_CMD_PFN(sc->pf) |
V_FW_EQ_ETH_CMD_VFN(0));
c.alloc_to_len16 = htobe32(F_FW_EQ_ETH_CMD_ALLOC |
F_FW_EQ_ETH_CMD_EQSTART | FW_LEN16(c));
c.viid_pkd = htobe32(V_FW_EQ_ETH_CMD_VIID(pi->viid));
c.fetchszm_to_iqid =
htobe32(V_FW_EQ_ETH_CMD_HOSTFCMODE(X_HOSTFCMODE_STATUS_PAGE) |
V_FW_EQ_ETH_CMD_PCIECHN(eq->tx_chan) | F_FW_EQ_ETH_CMD_FETCHRO |
V_FW_EQ_ETH_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize = htobe32(V_FW_EQ_ETH_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_EQ_ETH_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
V_FW_EQ_ETH_CMD_CIDXFTHRESH(X_CIDXFLUSHTHRESH_32) |
V_FW_EQ_ETH_CMD_EQSIZE(eq->qsize));
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(pi->dev,
"failed to create Ethernet egress queue: %d\n", rc);
return (rc);
}
eq->flags |= EQ_ALLOCATED;
eq->cntxt_id = G_FW_EQ_ETH_CMD_EQID(be32toh(c.eqid_pkd));
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
return (rc);
}
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
ofld_eq_alloc(struct adapter *sc, struct port_info *pi, struct sge_eq *eq)
{
int rc, cntxt_id;
struct fw_eq_ofld_cmd c;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(&c, sizeof(c));
c.op_to_vfn = htonl(V_FW_CMD_OP(FW_EQ_OFLD_CMD) | F_FW_CMD_REQUEST |
F_FW_CMD_WRITE | F_FW_CMD_EXEC | V_FW_EQ_OFLD_CMD_PFN(sc->pf) |
V_FW_EQ_OFLD_CMD_VFN(0));
c.alloc_to_len16 = htonl(F_FW_EQ_OFLD_CMD_ALLOC |
F_FW_EQ_OFLD_CMD_EQSTART | FW_LEN16(c));
c.fetchszm_to_iqid =
htonl(V_FW_EQ_OFLD_CMD_HOSTFCMODE(X_HOSTFCMODE_STATUS_PAGE) |
V_FW_EQ_OFLD_CMD_PCIECHN(eq->tx_chan) |
F_FW_EQ_OFLD_CMD_FETCHRO | V_FW_EQ_OFLD_CMD_IQID(eq->iqid));
c.dcaen_to_eqsize =
htobe32(V_FW_EQ_OFLD_CMD_FBMIN(X_FETCHBURSTMIN_64B) |
V_FW_EQ_OFLD_CMD_FBMAX(X_FETCHBURSTMAX_512B) |
V_FW_EQ_OFLD_CMD_CIDXFTHRESH(X_CIDXFLUSHTHRESH_32) |
V_FW_EQ_OFLD_CMD_EQSIZE(eq->qsize));
c.eqaddr = htobe64(eq->ba);
rc = -t4_wr_mbox(sc, sc->mbox, &c, sizeof(c), &c);
if (rc != 0) {
device_printf(pi->dev,
"failed to create egress queue for TCP offload: %d\n", rc);
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags |= EQ_ALLOCATED;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->cntxt_id = G_FW_EQ_OFLD_CMD_EQID(be32toh(c.eqid_pkd));
cntxt_id = eq->cntxt_id - sc->sge.eq_start;
if (cntxt_id >= sc->sge.neq)
panic("%s: eq->cntxt_id (%d) more than the max (%d)", __func__,
cntxt_id, sc->sge.neq - 1);
sc->sge.eqmap[cntxt_id] = eq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_eq(struct adapter *sc, struct port_info *pi, struct sge_eq *eq)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
size_t len;
mtx_init(&eq->eq_lock, eq->lockname, NULL, MTX_DEF);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
len = eq->qsize * EQ_ESIZE;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
rc = alloc_ring(sc, len, &eq->desc_tag, &eq->desc_map,
&eq->ba, (void **)&eq->desc);
if (rc)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->cap = eq->qsize - SPG_LEN / EQ_ESIZE;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
eq->spg = (void *)&eq->desc[eq->cap];
eq->avail = eq->cap - 1; /* one less to avoid cidx = pidx */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->pidx = eq->cidx = 0;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
switch (eq->flags & EQ_TYPEMASK) {
case EQ_CTRL:
rc = ctrl_eq_alloc(sc, eq);
break;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_ETH:
rc = eth_eq_alloc(sc, pi, eq);
break;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_OFLD:
rc = ofld_eq_alloc(sc, pi, eq);
break;
#endif
default:
panic("%s: invalid eq type %d.", __func__,
eq->flags & EQ_TYPEMASK);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
if (rc != 0) {
device_printf(sc->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to allocate egress queue(%d): %d",
eq->flags & EQ_TYPEMASK, rc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->tx_callout.c_cpu = eq->cntxt_id % mp_ncpus;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
}
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free_eq(struct adapter *sc, struct sge_eq *eq)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
int rc;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->flags & EQ_ALLOCATED) {
switch (eq->flags & EQ_TYPEMASK) {
case EQ_CTRL:
rc = -t4_ctrl_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
case EQ_ETH:
rc = -t4_eth_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
#ifdef TCP_OFFLOAD
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
case EQ_OFLD:
rc = -t4_ofld_eq_free(sc, sc->mbox, sc->pf, 0,
eq->cntxt_id);
break;
#endif
default:
panic("%s: invalid eq type %d.", __func__,
eq->flags & EQ_TYPEMASK);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
if (rc != 0) {
device_printf(sc->dev,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
"failed to free egress queue (%d): %d\n",
eq->flags & EQ_TYPEMASK, rc);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags &= ~EQ_ALLOCATED;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
free_ring(sc, eq->desc_tag, eq->desc_map, eq->ba, eq->desc);
if (mtx_initialized(&eq->eq_lock))
mtx_destroy(&eq->eq_lock);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bzero(eq, sizeof(*eq));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
return (0);
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
alloc_wrq(struct adapter *sc, struct port_info *pi, struct sge_wrq *wrq,
struct sysctl_oid *oid)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int rc;
struct sysctl_ctx_list *ctx = pi ? &pi->ctx : &sc->ctx;
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
rc = alloc_eq(sc, pi, &wrq->eq);
if (rc)
return (rc);
wrq->adapter = sc;
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
STAILQ_INIT(&wrq->wr_list);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "cntxt_id", CTLFLAG_RD,
&wrq->eq.cntxt_id, 0, "SGE context id of the queue");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &wrq->eq.cidx, 0, sysctl_uint16, "I",
"consumer index");
SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "pidx",
CTLTYPE_INT | CTLFLAG_RD, &wrq->eq.pidx, 0, sysctl_uint16, "I",
"producer index");
SYSCTL_ADD_UQUAD(ctx, children, OID_AUTO, "tx_wrs", CTLFLAG_RD,
&wrq->tx_wrs, "# of work requests");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "no_desc", CTLFLAG_RD,
&wrq->no_desc, 0,
"# of times queue ran out of hardware descriptors");
SYSCTL_ADD_UINT(ctx, children, OID_AUTO, "unstalled", CTLFLAG_RD,
&wrq->eq.unstalled, 0, "# of times queue recovered after stall");
return (rc);
}
static int
free_wrq(struct adapter *sc, struct sge_wrq *wrq)
{
int rc;
rc = free_eq(sc, &wrq->eq);
if (rc)
return (rc);
bzero(wrq, sizeof(*wrq));
return (0);
}
static int
alloc_txq(struct port_info *pi, struct sge_txq *txq, int idx,
struct sysctl_oid *oid)
{
int rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct adapter *sc = pi->adapter;
struct sge_eq *eq = &txq->eq;
char name[16];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct sysctl_oid_list *children = SYSCTL_CHILDREN(oid);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = alloc_eq(sc, pi, eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc)
return (rc);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txq->ifp = pi->ifp;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txq->sdesc = malloc(eq->cap * sizeof(struct tx_sdesc), M_CXGBE,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
M_ZERO | M_WAITOK);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txq->br = buf_ring_alloc(eq->qsize, M_CXGBE, M_WAITOK, &eq->eq_lock);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
rc = bus_dma_tag_create(sc->dmat, 1, 0, BUS_SPACE_MAXADDR,
BUS_SPACE_MAXADDR, NULL, NULL, 64 * 1024, TX_SGL_SEGS,
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
BUS_SPACE_MAXSIZE, BUS_DMA_ALLOCNOW, NULL, NULL, &txq->tx_tag);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev,
"failed to create tx DMA tag: %d\n", rc);
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
/*
* We can stuff ~10 frames in an 8-descriptor txpkts WR (8 is the SGE
* limit for any WR). txq->no_dmamap events shouldn't occur if maps is
* sized for the worst case.
*/
rc = t4_alloc_tx_maps(&txq->txmaps, txq->tx_tag, eq->qsize * 10 / 8,
M_WAITOK);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0) {
device_printf(sc->dev, "failed to setup tx DMA maps: %d\n", rc);
return (rc);
}
snprintf(name, sizeof(name), "%d", idx);
oid = SYSCTL_ADD_NODE(&pi->ctx, children, OID_AUTO, name, CTLFLAG_RD,
NULL, "tx queue");
children = SYSCTL_CHILDREN(oid);
- driver ioctl to get SGE context for any given queue. - sysctls to display the context id, cidx, and pidx of all kinds of queues. MFC after: 3 days
2011-06-11 04:50:54 +00:00
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "cntxt_id", CTLFLAG_RD,
&eq->cntxt_id, 0, "SGE context id of the queue");
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "cidx",
CTLTYPE_INT | CTLFLAG_RD, &eq->cidx, 0, sysctl_uint16, "I",
"consumer index");
SYSCTL_ADD_PROC(&pi->ctx, children, OID_AUTO, "pidx",
CTLTYPE_INT | CTLFLAG_RD, &eq->pidx, 0, sysctl_uint16, "I",
"producer index");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "txcsum", CTLFLAG_RD,
&txq->txcsum, "# of times hardware assisted with checksum");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "vlan_insertion",
CTLFLAG_RD, &txq->vlan_insertion,
"# of times hardware inserted 802.1Q tag");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "tso_wrs", CTLFLAG_RD,
&txq->tso_wrs, "# of IPv4 TSO work requests");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "imm_wrs", CTLFLAG_RD,
&txq->imm_wrs, "# of work requests with immediate data");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "sgl_wrs", CTLFLAG_RD,
&txq->sgl_wrs, "# of work requests with direct SGL");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "txpkt_wrs", CTLFLAG_RD,
&txq->txpkt_wrs, "# of txpkt work requests (one pkt/WR)");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "txpkts_wrs", CTLFLAG_RD,
&txq->txpkts_wrs, "# of txpkts work requests (multiple pkts/WR)");
SYSCTL_ADD_UQUAD(&pi->ctx, children, OID_AUTO, "txpkts_pkts", CTLFLAG_RD,
&txq->txpkts_pkts, "# of frames tx'd using txpkts work requests");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "no_dmamap", CTLFLAG_RD,
&txq->no_dmamap, 0, "# of times txq ran out of DMA maps");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "no_desc", CTLFLAG_RD,
&txq->no_desc, 0, "# of times txq ran out of hardware descriptors");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "egr_update", CTLFLAG_RD,
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
&eq->egr_update, 0, "egress update notifications from the SGE");
SYSCTL_ADD_UINT(&pi->ctx, children, OID_AUTO, "unstalled", CTLFLAG_RD,
&eq->unstalled, 0, "# of times txq recovered after stall");
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
static int
free_txq(struct port_info *pi, struct sge_txq *txq)
{
int rc;
struct adapter *sc = pi->adapter;
struct sge_eq *eq = &txq->eq;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = free_eq(sc, eq);
if (rc)
return (rc);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
free(txq->sdesc, M_CXGBE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (txq->txmaps.maps)
t4_free_tx_maps(&txq->txmaps, txq->tx_tag);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
buf_ring_free(txq->br, M_CXGBE);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
if (txq->tx_tag)
bus_dma_tag_destroy(txq->tx_tag);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bzero(txq, sizeof(*txq));
return (0);
}
static void
oneseg_dma_callback(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
bus_addr_t *ba = arg;
KASSERT(nseg == 1,
("%s meant for single segment mappings only.", __func__));
*ba = error ? 0 : segs->ds_addr;
}
static inline bool
is_new_response(const struct sge_iq *iq, struct rsp_ctrl **ctrl)
{
*ctrl = (void *)((uintptr_t)iq->cdesc +
(iq->esize - sizeof(struct rsp_ctrl)));
return (((*ctrl)->u.type_gen >> S_RSPD_GEN) == iq->gen);
}
static inline void
iq_next(struct sge_iq *iq)
{
iq->cdesc = (void *) ((uintptr_t)iq->cdesc + iq->esize);
if (__predict_false(++iq->cidx == iq->qsize - 1)) {
iq->cidx = 0;
iq->gen ^= 1;
iq->cdesc = iq->desc;
}
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
#define FL_HW_IDX(x) ((x) >> 3)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
static inline void
ring_fl_db(struct adapter *sc, struct sge_fl *fl)
{
int ndesc = fl->pending / 8;
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
if (FL_HW_IDX(fl->pidx) == FL_HW_IDX(fl->cidx))
ndesc--; /* hold back one credit */
if (ndesc <= 0)
return; /* nothing to do */
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wmb();
t4_write_reg(sc, MYPF_REG(A_SGE_PF_KDOORBELL), F_DBPRIO |
V_QID(fl->cntxt_id) | V_PIDX(ndesc));
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
fl->pending -= ndesc * 8;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
/*
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
* Fill up the freelist by upto nbufs and maybe ring its doorbell.
*
* Returns non-zero to indicate that it should be added to the list of starving
* freelists.
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
*/
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
refill_fl(struct adapter *sc, struct sge_fl *fl, int nbufs)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
__be64 *d = &fl->desc[fl->pidx];
struct fl_sdesc *sd = &fl->sdesc[fl->pidx];
bus_dma_tag_t tag;
bus_addr_t pa;
caddr_t cl;
int rc;
FL_LOCK_ASSERT_OWNED(fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (nbufs > fl->needed)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
nbufs = fl->needed;
while (nbufs--) {
if (sd->cl != NULL) {
/*
* This happens when a frame small enough to fit
* entirely in an mbuf was received in cl last time.
* We'd held on to cl and can reuse it now. Note that
* we reuse a cluster of the old size if fl->tag_idx is
* no longer the same as sd->tag_idx.
*/
KASSERT(*d == sd->ba_tag,
("%s: recyling problem at pidx %d",
__func__, fl->pidx));
d++;
goto recycled;
}
if (fl->tag_idx != sd->tag_idx) {
bus_dmamap_t map;
bus_dma_tag_t newtag = fl->tag[fl->tag_idx];
bus_dma_tag_t oldtag = fl->tag[sd->tag_idx];
/*
* An MTU change can get us here. Discard the old map
* which was created with the old tag, but only if
* we're able to get a new one.
*/
rc = bus_dmamap_create(newtag, 0, &map);
if (rc == 0) {
bus_dmamap_destroy(oldtag, sd->map);
sd->map = map;
sd->tag_idx = fl->tag_idx;
}
}
tag = fl->tag[sd->tag_idx];
cl = m_cljget(NULL, M_NOWAIT, FL_BUF_SIZE(sd->tag_idx));
if (cl == NULL)
break;
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
rc = bus_dmamap_load(tag, sd->map, cl, FL_BUF_SIZE(sd->tag_idx),
oneseg_dma_callback, &pa, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0 || pa == 0) {
fl->dmamap_failed++;
uma_zfree(FL_BUF_ZONE(sd->tag_idx), cl);
break;
}
sd->cl = cl;
*d++ = htobe64(pa | sd->tag_idx);
#ifdef INVARIANTS
sd->ba_tag = htobe64(pa | sd->tag_idx);
#endif
Tweaks for rx: - everything related to LRO should be in #ifdef INET blocks - reorder sge_iq's fields so that the most frequently used are all together - pull all rx code into t4_intr_data directly - let go of the ingress queue lock when passing up data - refill the freelist only if it is short of at least 32 buffers
2011-03-05 03:42:03 +00:00
recycled:
/* sd->m is never recycled, should always be NULL */
KASSERT(sd->m == NULL, ("%s: stray mbuf", __func__));
sd->m = m_gethdr(M_NOWAIT, MT_NOINIT);
if (sd->m == NULL)
break;
fl->pending++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
fl->needed--;
sd++;
if (++fl->pidx == fl->cap) {
fl->pidx = 0;
sd = fl->sdesc;
d = fl->desc;
}
}
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (fl->pending >= 8)
Ring the freelist doorbell from within refill_fl. While here, fix a bug that could have allowed the hardware pidx to reach the cidx even though the freelist isn't empty. (Haven't actually seen this but it was there waiting to happen..) MFC after: 1 week
2011-04-20 23:20:00 +00:00
ring_fl_db(sc, fl);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (FL_RUNNING_LOW(fl) && !(fl->flags & FL_STARVING));
}
/*
* Attempt to refill all starving freelists.
*/
static void
refill_sfl(void *arg)
{
struct adapter *sc = arg;
struct sge_fl *fl, *fl_temp;
mtx_lock(&sc->sfl_lock);
TAILQ_FOREACH_SAFE(fl, &sc->sfl, link, fl_temp) {
FL_LOCK(fl);
refill_fl(sc, fl, 64);
if (FL_NOT_RUNNING_LOW(fl) || fl->flags & FL_DOOMED) {
TAILQ_REMOVE(&sc->sfl, fl, link);
fl->flags &= ~FL_STARVING;
}
FL_UNLOCK(fl);
}
if (!TAILQ_EMPTY(&sc->sfl))
callout_schedule(&sc->sfl_callout, hz / 5);
mtx_unlock(&sc->sfl_lock);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
static int
alloc_fl_sdesc(struct sge_fl *fl)
{
struct fl_sdesc *sd;
bus_dma_tag_t tag;
int i, rc;
FL_LOCK_ASSERT_OWNED(fl);
fl->sdesc = malloc(fl->cap * sizeof(struct fl_sdesc), M_CXGBE,
M_ZERO | M_WAITOK);
tag = fl->tag[fl->tag_idx];
sd = fl->sdesc;
for (i = 0; i < fl->cap; i++, sd++) {
sd->tag_idx = fl->tag_idx;
rc = bus_dmamap_create(tag, 0, &sd->map);
if (rc != 0)
goto failed;
}
return (0);
failed:
while (--i >= 0) {
sd--;
bus_dmamap_destroy(tag, sd->map);
if (sd->m) {
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
m_init(sd->m, NULL, 0, M_NOWAIT, MT_DATA, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
m_free(sd->m);
sd->m = NULL;
}
}
KASSERT(sd == fl->sdesc, ("%s: EDOOFUS", __func__));
free(fl->sdesc, M_CXGBE);
fl->sdesc = NULL;
return (rc);
}
static void
free_fl_sdesc(struct sge_fl *fl)
{
struct fl_sdesc *sd;
int i;
FL_LOCK_ASSERT_OWNED(fl);
sd = fl->sdesc;
for (i = 0; i < fl->cap; i++, sd++) {
if (sd->m) {
cxgbe shouldn't directly know of the UMA zones where network buffers come from. MFC after: 1 week
2011-03-08 03:04:07 +00:00
m_init(sd->m, NULL, 0, M_NOWAIT, MT_DATA, 0);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
m_free(sd->m);
sd->m = NULL;
}
if (sd->cl) {
bus_dmamap_unload(fl->tag[sd->tag_idx], sd->map);
uma_zfree(FL_BUF_ZONE(sd->tag_idx), sd->cl);
sd->cl = NULL;
}
bus_dmamap_destroy(fl->tag[sd->tag_idx], sd->map);
}
free(fl->sdesc, M_CXGBE);
fl->sdesc = NULL;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int
t4_alloc_tx_maps(struct tx_maps *txmaps, bus_dma_tag_t tx_tag, int count,
int flags)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct tx_map *txm;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
int i, rc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->map_total = txmaps->map_avail = count;
txmaps->map_cidx = txmaps->map_pidx = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->maps = malloc(count * sizeof(struct tx_map), M_CXGBE,
M_ZERO | flags);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txm = txmaps->maps;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
for (i = 0; i < count; i++, txm++) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
rc = bus_dmamap_create(tx_tag, 0, &txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (rc != 0)
goto failed;
}
return (0);
failed:
while (--i >= 0) {
txm--;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bus_dmamap_destroy(tx_tag, txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(txm == txmaps->maps, ("%s: EDOOFUS", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free(txmaps->maps, M_CXGBE);
txmaps->maps = NULL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (rc);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
void
t4_free_tx_maps(struct tx_maps *txmaps, bus_dma_tag_t tx_tag)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
struct tx_map *txm;
int i;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txm = txmaps->maps;
for (i = 0; i < txmaps->map_total; i++, txm++) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (txm->m) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bus_dmamap_unload(tx_tag, txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
m_freem(txm->m);
txm->m = NULL;
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
bus_dmamap_destroy(tx_tag, txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
free(txmaps->maps, M_CXGBE);
txmaps->maps = NULL;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
/*
* We'll do immediate data tx for non-TSO, but only when not coalescing. We're
* willing to use upto 2 hardware descriptors which means a maximum of 96 bytes
* of immediate data.
*/
#define IMM_LEN ( \
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
2 * EQ_ESIZE \
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- sizeof(struct fw_eth_tx_pkt_wr) \
- sizeof(struct cpl_tx_pkt_core))
/*
* Returns non-zero on failure, no need to cleanup anything in that case.
*
* Note 1: We always try to defrag the mbuf if required and return EFBIG only
* if the resulting chain still won't fit in a tx descriptor.
*
* Note 2: We'll pullup the mbuf chain if TSO is requested and the first mbuf
* does not have the TCP header in it.
*/
static int
get_pkt_sgl(struct sge_txq *txq, struct mbuf **fp, struct sgl *sgl,
int sgl_only)
{
struct mbuf *m = *fp;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct tx_maps *txmaps;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct tx_map *txm;
int rc, defragged = 0, n;
TXQ_LOCK_ASSERT_OWNED(txq);
if (m->m_pkthdr.tso_segsz)
sgl_only = 1; /* Do not allow immediate data with LSO */
start: sgl->nsegs = 0;
if (m->m_pkthdr.len <= IMM_LEN && !sgl_only)
return (0); /* nsegs = 0 tells caller to use imm. tx */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps = &txq->txmaps;
if (txmaps->map_avail == 0) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->no_dmamap++;
return (ENOMEM);
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txm = &txmaps->maps[txmaps->map_pidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (m->m_pkthdr.tso_segsz && m->m_len < 50) {
*fp = m_pullup(m, 50);
m = *fp;
if (m == NULL)
return (ENOBUFS);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
rc = bus_dmamap_load_mbuf_sg(txq->tx_tag, txm->map, m, sgl->seg,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
&sgl->nsegs, BUS_DMA_NOWAIT);
if (rc == EFBIG && defragged == 0) {
m = m_defrag(m, M_DONTWAIT);
if (m == NULL)
return (EFBIG);
defragged = 1;
*fp = m;
goto start;
}
if (rc != 0)
return (rc);
txm->m = m;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->map_avail--;
if (++txmaps->map_pidx == txmaps->map_total)
txmaps->map_pidx = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
KASSERT(sgl->nsegs > 0 && sgl->nsegs <= TX_SGL_SEGS,
("%s: bad DMA mapping (%d segments)", __func__, sgl->nsegs));
/*
* Store the # of flits required to hold this frame's SGL in nflits. An
* SGL has a (ULPTX header + len0, addr0) tuple optionally followed by
* multiple (len0 + len1, addr0, addr1) tuples. If addr1 is not used
* then len1 must be set to 0.
*/
n = sgl->nsegs - 1;
sgl->nflits = (3 * n) / 2 + (n & 1) + 2;
return (0);
}
/*
* Releases all the txq resources used up in the specified sgl.
*/
static int
free_pkt_sgl(struct sge_txq *txq, struct sgl *sgl)
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct tx_maps *txmaps;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct tx_map *txm;
TXQ_LOCK_ASSERT_OWNED(txq);
if (sgl->nsegs == 0)
return (0); /* didn't use any map */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps = &txq->txmaps;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* 1 pkt uses exactly 1 map, back it out */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->map_avail++;
if (txmaps->map_pidx > 0)
txmaps->map_pidx--;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
else
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->map_pidx = txmaps->map_total - 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txm = &txmaps->maps[txmaps->map_pidx];
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
bus_dmamap_unload(txq->tx_tag, txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txm->m = NULL;
return (0);
}
static int
write_txpkt_wr(struct port_info *pi, struct sge_txq *txq, struct mbuf *m,
struct sgl *sgl)
{
struct sge_eq *eq = &txq->eq;
struct fw_eth_tx_pkt_wr *wr;
struct cpl_tx_pkt_core *cpl;
uint32_t ctrl; /* used in many unrelated places */
uint64_t ctrl1;
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
int nflits, ndesc, pktlen;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct tx_sdesc *txsd;
caddr_t dst;
TXQ_LOCK_ASSERT_OWNED(txq);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
pktlen = m->m_pkthdr.len;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/*
* Do we have enough flits to send this frame out?
*/
ctrl = sizeof(struct cpl_tx_pkt_core);
if (m->m_pkthdr.tso_segsz) {
nflits = TXPKT_LSO_WR_HDR;
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.
2012-06-22 07:51:15 +00:00
ctrl += sizeof(struct cpl_tx_pkt_lso_core);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
} else
nflits = TXPKT_WR_HDR;
if (sgl->nsegs > 0)
nflits += sgl->nflits;
else {
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
nflits += howmany(pktlen, 8);
ctrl += pktlen;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
ndesc = howmany(nflits, 8);
if (ndesc > eq->avail)
return (ENOMEM);
/* Firmware work request header */
wr = (void *)&eq->desc[eq->pidx];
wr->op_immdlen = htobe32(V_FW_WR_OP(FW_ETH_TX_PKT_WR) |
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
V_FW_ETH_TX_PKT_WR_IMMDLEN(ctrl));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl = V_FW_WR_LEN16(howmany(nflits, 2));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->avail == ndesc) {
if (!(eq->flags & EQ_CRFLUSHED)) {
ctrl |= F_FW_WR_EQUEQ | F_FW_WR_EQUIQ;
eq->flags |= EQ_CRFLUSHED;
}
eq->flags |= EQ_STALLED;
There is no need to request a tx credit flush if such a request is already pending. MFC after: 3 days
2011-04-14 20:06:23 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr->equiq_to_len16 = htobe32(ctrl);
wr->r3 = 0;
if (m->m_pkthdr.tso_segsz) {
cxgbe(4): update to firmware interface 1.5.2.0; updates to shared code.
2012-06-22 07:51:15 +00:00
struct cpl_tx_pkt_lso_core *lso = (void *)(wr + 1);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
struct ether_header *eh;
struct ip *ip;
struct tcphdr *tcp;
ctrl = V_LSO_OPCODE(CPL_TX_PKT_LSO) | F_LSO_FIRST_SLICE |
F_LSO_LAST_SLICE;
eh = mtod(m, struct ether_header *);
if (eh->ether_type == htons(ETHERTYPE_VLAN)) {
ctrl |= V_LSO_ETHHDR_LEN(1);
ip = (void *)((struct ether_vlan_header *)eh + 1);
} else
ip = (void *)(eh + 1);
tcp = (void *)((uintptr_t)ip + ip->ip_hl * 4);
ctrl |= V_LSO_IPHDR_LEN(ip->ip_hl) |
V_LSO_TCPHDR_LEN(tcp->th_off);
lso->lso_ctrl = htobe32(ctrl);
lso->ipid_ofst = htobe16(0);
lso->mss = htobe16(m->m_pkthdr.tso_segsz);
lso->seqno_offset = htobe32(0);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
lso->len = htobe32(pktlen);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cpl = (void *)(lso + 1);
txq->tso_wrs++;
} else
cpl = (void *)(wr + 1);
/* Checksum offload */
ctrl1 = 0;
if (!(m->m_pkthdr.csum_flags & CSUM_IP))
ctrl1 |= F_TXPKT_IPCSUM_DIS;
if (!(m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)))
ctrl1 |= F_TXPKT_L4CSUM_DIS;
if (m->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TCP | CSUM_UDP))
txq->txcsum++; /* some hardware assistance provided */
/* VLAN tag insertion */
if (m->m_flags & M_VLANTAG) {
ctrl1 |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(m->m_pkthdr.ether_vtag);
txq->vlan_insertion++;
}
/* CPL header */
cpl->ctrl0 = htobe32(V_TXPKT_OPCODE(CPL_TX_PKT) |
V_TXPKT_INTF(pi->tx_chan) | V_TXPKT_PF(pi->adapter->pf));
cpl->pack = 0;
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
cpl->len = htobe16(pktlen);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cpl->ctrl1 = htobe64(ctrl1);
/* Software descriptor */
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->pidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txsd->desc_used = ndesc;
eq->pending += ndesc;
eq->avail -= ndesc;
eq->pidx += ndesc;
if (eq->pidx >= eq->cap)
eq->pidx -= eq->cap;
/* SGL */
dst = (void *)(cpl + 1);
if (sgl->nsegs > 0) {
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd->credits = 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->sgl_wrs++;
write_sgl_to_txd(eq, sgl, &dst);
} else {
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd->credits = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txq->imm_wrs++;
for (; m; m = m->m_next) {
copy_to_txd(eq, mtod(m, caddr_t), &dst, m->m_len);
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#ifdef INVARIANTS
pktlen -= m->m_len;
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
#ifdef INVARIANTS
KASSERT(pktlen == 0, ("%s: %d bytes left.", __func__, pktlen));
#endif
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
txq->txpkt_wrs++;
return (0);
}
/*
* Returns 0 to indicate that m has been accepted into a coalesced tx work
* request. It has either been folded into txpkts or txpkts was flushed and m
* has started a new coalesced work request (as the first frame in a fresh
* txpkts).
*
* Returns non-zero to indicate a failure - caller is responsible for
* transmitting m, if there was anything in txpkts it has been flushed.
*/
static int
add_to_txpkts(struct port_info *pi, struct sge_txq *txq, struct txpkts *txpkts,
struct mbuf *m, struct sgl *sgl)
{
struct sge_eq *eq = &txq->eq;
int can_coalesce;
struct tx_sdesc *txsd;
int flits;
TXQ_LOCK_ASSERT_OWNED(txq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(sgl->nsegs, ("%s: can't coalesce imm data", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (txpkts->npkt > 0) {
flits = TXPKTS_PKT_HDR + sgl->nflits;
can_coalesce = m->m_pkthdr.tso_segsz == 0 &&
txpkts->nflits + flits <= TX_WR_FLITS &&
txpkts->nflits + flits <= eq->avail * 8 &&
txpkts->plen + m->m_pkthdr.len < 65536;
if (can_coalesce) {
txpkts->npkt++;
txpkts->nflits += flits;
txpkts->plen += m->m_pkthdr.len;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->pidx];
txsd->credits++;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
/*
* Couldn't coalesce m into txpkts. The first order of business
* is to send txpkts on its way. Then we'll revisit m.
*/
write_txpkts_wr(txq, txpkts);
}
/*
* Check if we can start a new coalesced tx work request with m as
* the first packet in it.
*/
KASSERT(txpkts->npkt == 0, ("%s: txpkts not empty", __func__));
flits = TXPKTS_WR_HDR + sgl->nflits;
can_coalesce = m->m_pkthdr.tso_segsz == 0 &&
flits <= eq->avail * 8 && flits <= TX_WR_FLITS;
if (can_coalesce == 0)
return (EINVAL);
/*
* Start a fresh coalesced tx WR with m as the first frame in it.
*/
txpkts->npkt = 1;
txpkts->nflits = flits;
txpkts->flitp = &eq->desc[eq->pidx].flit[2];
txpkts->plen = m->m_pkthdr.len;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->pidx];
txsd->credits = 1;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
return (0);
}
/*
* Note that write_txpkts_wr can never run out of hardware descriptors (but
* write_txpkt_wr can). add_to_txpkts ensures that a frame is accepted for
* coalescing only if sufficient hardware descriptors are available.
*/
static void
write_txpkts_wr(struct sge_txq *txq, struct txpkts *txpkts)
{
struct sge_eq *eq = &txq->eq;
struct fw_eth_tx_pkts_wr *wr;
struct tx_sdesc *txsd;
uint32_t ctrl;
int ndesc;
TXQ_LOCK_ASSERT_OWNED(txq);
ndesc = howmany(txpkts->nflits, 8);
wr = (void *)&eq->desc[eq->pidx];
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
wr->op_pkd = htobe32(V_FW_WR_OP(FW_ETH_TX_PKTS_WR));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ctrl = V_FW_WR_LEN16(howmany(txpkts->nflits, 2));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (eq->avail == ndesc) {
if (!(eq->flags & EQ_CRFLUSHED)) {
ctrl |= F_FW_WR_EQUEQ | F_FW_WR_EQUIQ;
eq->flags |= EQ_CRFLUSHED;
}
eq->flags |= EQ_STALLED;
There is no need to request a tx credit flush if such a request is already pending. MFC after: 3 days
2011-04-14 20:06:23 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr->equiq_to_len16 = htobe32(ctrl);
wr->plen = htobe16(txpkts->plen);
wr->npkt = txpkts->npkt;
Update to firmware interface 1.3.10 MFC after: 1 week
2011-05-30 21:56:37 +00:00
wr->r3 = wr->type = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
/* Everything else already written */
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->pidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
txsd->desc_used = ndesc;
There is no need to request a tx credit flush if such a request is already pending. MFC after: 3 days
2011-04-14 20:06:23 +00:00
KASSERT(eq->avail >= ndesc, ("%s: out of descriptors", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
eq->pending += ndesc;
eq->avail -= ndesc;
eq->pidx += ndesc;
if (eq->pidx >= eq->cap)
eq->pidx -= eq->cap;
txq->txpkts_pkts += txpkts->npkt;
txq->txpkts_wrs++;
txpkts->npkt = 0; /* emptied */
}
static inline void
write_ulp_cpl_sgl(struct port_info *pi, struct sge_txq *txq,
struct txpkts *txpkts, struct mbuf *m, struct sgl *sgl)
{
struct ulp_txpkt *ulpmc;
struct ulptx_idata *ulpsc;
struct cpl_tx_pkt_core *cpl;
struct sge_eq *eq = &txq->eq;
uintptr_t flitp, start, end;
uint64_t ctrl;
caddr_t dst;
KASSERT(txpkts->npkt > 0, ("%s: txpkts is empty", __func__));
start = (uintptr_t)eq->desc;
end = (uintptr_t)eq->spg;
/* Checksum offload */
ctrl = 0;
if (!(m->m_pkthdr.csum_flags & CSUM_IP))
ctrl |= F_TXPKT_IPCSUM_DIS;
if (!(m->m_pkthdr.csum_flags & (CSUM_TCP | CSUM_UDP)))
ctrl |= F_TXPKT_L4CSUM_DIS;
if (m->m_pkthdr.csum_flags & (CSUM_IP | CSUM_TCP | CSUM_UDP))
txq->txcsum++; /* some hardware assistance provided */
/* VLAN tag insertion */
if (m->m_flags & M_VLANTAG) {
ctrl |= F_TXPKT_VLAN_VLD | V_TXPKT_VLAN(m->m_pkthdr.ether_vtag);
txq->vlan_insertion++;
}
/*
* The previous packet's SGL must have ended at a 16 byte boundary (this
* is required by the firmware/hardware). It follows that flitp cannot
* wrap around between the ULPTX master command and ULPTX subcommand (8
* bytes each), and that it can not wrap around in the middle of the
* cpl_tx_pkt_core either.
*/
flitp = (uintptr_t)txpkts->flitp;
KASSERT((flitp & 0xf) == 0,
("%s: last SGL did not end at 16 byte boundary: %p",
__func__, txpkts->flitp));
/* ULP master command */
ulpmc = (void *)flitp;
A txpkts work request should have a valid FID. MFC after: 1 week
2011-03-05 03:18:56 +00:00
ulpmc->cmd_dest = htonl(V_ULPTX_CMD(ULP_TX_PKT) | V_ULP_TXPKT_DEST(0) |
V_ULP_TXPKT_FID(eq->iqid));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ulpmc->len = htonl(howmany(sizeof(*ulpmc) + sizeof(*ulpsc) +
sizeof(*cpl) + 8 * sgl->nflits, 16));
/* ULP subcommand */
ulpsc = (void *)(ulpmc + 1);
ulpsc->cmd_more = htobe32(V_ULPTX_CMD((u32)ULP_TX_SC_IMM) |
F_ULP_TX_SC_MORE);
ulpsc->len = htobe32(sizeof(struct cpl_tx_pkt_core));
flitp += sizeof(*ulpmc) + sizeof(*ulpsc);
if (flitp == end)
flitp = start;
/* CPL_TX_PKT */
cpl = (void *)flitp;
cpl->ctrl0 = htobe32(V_TXPKT_OPCODE(CPL_TX_PKT) |
V_TXPKT_INTF(pi->tx_chan) | V_TXPKT_PF(pi->adapter->pf));
cpl->pack = 0;
cpl->len = htobe16(m->m_pkthdr.len);
cpl->ctrl1 = htobe64(ctrl);
flitp += sizeof(*cpl);
if (flitp == end)
flitp = start;
/* SGL for this frame */
dst = (caddr_t)flitp;
txpkts->nflits += write_sgl_to_txd(eq, sgl, &dst);
txpkts->flitp = (void *)dst;
KASSERT(((uintptr_t)dst & 0xf) == 0,
("%s: SGL ends at %p (not a 16 byte boundary)", __func__, dst));
}
/*
* If the SGL ends on an address that is not 16 byte aligned, this function will
* add a 0 filled flit at the end. It returns 1 in that case.
*/
static int
write_sgl_to_txd(struct sge_eq *eq, struct sgl *sgl, caddr_t *to)
{
__be64 *flitp, *end;
struct ulptx_sgl *usgl;
bus_dma_segment_t *seg;
int i, padded;
KASSERT(sgl->nsegs > 0 && sgl->nflits > 0,
("%s: bad SGL - nsegs=%d, nflits=%d",
__func__, sgl->nsegs, sgl->nflits));
KASSERT(((uintptr_t)(*to) & 0xf) == 0,
("%s: SGL must start at a 16 byte boundary: %p", __func__, *to));
flitp = (__be64 *)(*to);
end = flitp + sgl->nflits;
seg = &sgl->seg[0];
usgl = (void *)flitp;
/*
* We start at a 16 byte boundary somewhere inside the tx descriptor
* ring, so we're at least 16 bytes away from the status page. There is
* no chance of a wrap around in the middle of usgl (which is 16 bytes).
*/
usgl->cmd_nsge = htobe32(V_ULPTX_CMD(ULP_TX_SC_DSGL) |
V_ULPTX_NSGE(sgl->nsegs));
usgl->len0 = htobe32(seg->ds_len);
usgl->addr0 = htobe64(seg->ds_addr);
seg++;
if ((uintptr_t)end <= (uintptr_t)eq->spg) {
/* Won't wrap around at all */
for (i = 0; i < sgl->nsegs - 1; i++, seg++) {
usgl->sge[i / 2].len[i & 1] = htobe32(seg->ds_len);
usgl->sge[i / 2].addr[i & 1] = htobe64(seg->ds_addr);
}
if (i & 1)
usgl->sge[i / 2].len[1] = htobe32(0);
} else {
/* Will wrap somewhere in the rest of the SGL */
/* 2 flits already written, write the rest flit by flit */
flitp = (void *)(usgl + 1);
for (i = 0; i < sgl->nflits - 2; i++) {
if ((uintptr_t)flitp == (uintptr_t)eq->spg)
flitp = (void *)eq->desc;
*flitp++ = get_flit(seg, sgl->nsegs - 1, i);
}
end = flitp;
}
if ((uintptr_t)end & 0xf) {
*(uint64_t *)end = 0;
end++;
padded = 1;
} else
padded = 0;
if ((uintptr_t)end == (uintptr_t)eq->spg)
*to = (void *)eq->desc;
else
*to = (void *)end;
return (padded);
}
static inline void
copy_to_txd(struct sge_eq *eq, caddr_t from, caddr_t *to, int len)
{
- Updated TOE support in the kernel. - Stateful TCP offload drivers for Terminator 3 and 4 (T3 and T4) ASICs. These are available as t3_tom and t4_tom modules that augment cxgb(4) and cxgbe(4) respectively. The cxgb/cxgbe drivers continue to work as usual with or without these extra features. - iWARP driver for Terminator 3 ASIC (kernel verbs). T4 iWARP in the works and will follow soon. Build-tested with make universe. 30s overview ============ What interfaces support TCP offload? Look for TOE4 and/or TOE6 in the capabilities of an interface: # ifconfig -m | grep TOE Enable/disable TCP offload on an interface (just like any other ifnet capability): # ifconfig cxgbe0 toe # ifconfig cxgbe0 -toe Which connections are offloaded? Look for toe4 and/or toe6 in the output of netstat and sockstat: # netstat -np tcp | grep toe # sockstat -46c | grep toe Reviewed by: bz, gnn Sponsored by: Chelsio communications. MFC after: ~3 months (after 9.1, and after ensuring MFC is feasible)
2012-06-19 07:34:13 +00:00
if (__predict_true((uintptr_t)(*to) + len <= (uintptr_t)eq->spg)) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
bcopy(from, *to, len);
(*to) += len;
} else {
int portion = (uintptr_t)eq->spg - (uintptr_t)(*to);
bcopy(from, *to, portion);
from += portion;
portion = len - portion; /* remaining */
bcopy(from, (void *)eq->desc, portion);
(*to) = (caddr_t)eq->desc + portion;
}
}
static inline void
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
ring_eq_db(struct adapter *sc, struct sge_eq *eq)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
wmb();
t4_write_reg(sc, MYPF_REG(A_SGE_PF_KDOORBELL),
V_QID(eq->cntxt_id) | V_PIDX(eq->pending));
eq->pending = 0;
}
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
static inline int
reclaimable(struct sge_eq *eq)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
unsigned int cidx;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
cidx = eq->spg->cidx; /* stable snapshot */
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
cidx = be16toh(cidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
if (cidx >= eq->cidx)
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
return (cidx - eq->cidx);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
else
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
return (cidx + eq->cap - eq->cidx);
}
/*
* There are "can_reclaim" tx descriptors ready to be reclaimed. Reclaim as
* many as possible but stop when there are around "n" mbufs to free.
*
* The actual number reclaimed is provided as the return value.
*/
static int
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
reclaim_tx_descs(struct sge_txq *txq, int can_reclaim, int n)
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
{
struct tx_sdesc *txsd;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
struct tx_maps *txmaps;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
struct tx_map *txm;
unsigned int reclaimed, maps;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
struct sge_eq *eq = &txq->eq;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
TXQ_LOCK_ASSERT_OWNED(txq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
if (can_reclaim == 0)
can_reclaim = reclaimable(eq);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
maps = reclaimed = 0;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
while (can_reclaim && maps < n) {
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
int ndesc;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
txsd = &txq->sdesc[eq->cidx];
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
ndesc = txsd->desc_used;
/* Firmware doesn't return "partial" credits. */
KASSERT(can_reclaim >= ndesc,
("%s: unexpected number of credits: %d, %d",
__func__, can_reclaim, ndesc));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
maps += txsd->credits;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
reclaimed += ndesc;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
can_reclaim -= ndesc;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
eq->cidx += ndesc;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
if (__predict_false(eq->cidx >= eq->cap))
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
eq->cidx -= eq->cap;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
}
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps = &txq->txmaps;
txm = &txmaps->maps[txmaps->map_cidx];
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
if (maps)
prefetch(txm->m);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
eq->avail += reclaimed;
KASSERT(eq->avail < eq->cap, /* avail tops out at (cap - 1) */
("%s: too many descriptors available", __func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
txmaps->map_avail += maps;
KASSERT(txmaps->map_avail <= txmaps->map_total,
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
("%s: too many maps available", __func__));
while (maps--) {
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
struct tx_map *next;
next = txm + 1;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (__predict_false(txmaps->map_cidx + 1 == txmaps->map_total))
next = txmaps->maps;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
prefetch(next->m);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
bus_dmamap_unload(txq->tx_tag, txm->map);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
m_freem(txm->m);
txm->m = NULL;
Calculate how many descriptors can be reclaimed before calling reclaim_tx_descs
2011-03-05 03:54:37 +00:00
txm = next;
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (__predict_false(++txmaps->map_cidx == txmaps->map_total))
txmaps->map_cidx = 0;
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
}
return (reclaimed);
}
static void
write_eqflush_wr(struct sge_eq *eq)
{
struct fw_eq_flush_wr *wr;
EQ_LOCK_ASSERT_OWNED(eq);
KASSERT(eq->avail > 0, ("%s: no descriptors left.", __func__));
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(!(eq->flags & EQ_CRFLUSHED), ("%s: flushed already", __func__));
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
wr = (void *)&eq->desc[eq->pidx];
bzero(wr, sizeof(*wr));
wr->opcode = FW_EQ_FLUSH_WR;
wr->equiq_to_len16 = htobe32(V_FW_WR_LEN16(sizeof(*wr) / 16) |
F_FW_WR_EQUEQ | F_FW_WR_EQUIQ);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq->flags |= (EQ_CRFLUSHED | EQ_STALLED);
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
eq->pending++;
eq->avail--;
if (++eq->pidx == eq->cap)
eq->pidx = 0;
}
static __be64
get_flit(bus_dma_segment_t *sgl, int nsegs, int idx)
{
int i = (idx / 3) * 2;
switch (idx % 3) {
case 0: {
__be64 rc;
rc = htobe32(sgl[i].ds_len);
if (i + 1 < nsegs)
rc |= (uint64_t)htobe32(sgl[i + 1].ds_len) << 32;
return (rc);
}
case 1:
return htobe64(sgl[i].ds_addr);
case 2:
return htobe64(sgl[i + 1].ds_addr);
}
return (0);
}
static void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
set_fl_tag_idx(struct sge_fl *fl, int bufsize)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
{
int i;
for (i = 0; i < FL_BUF_SIZES - 1; i++) {
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (FL_BUF_SIZE(i) >= bufsize)
cxgbe(4) - NIC driver for Chelsio T4 (Terminator 4) based 10Gb/1Gb adapters. MFC after: 3 weeks
2011-02-18 08:00:26 +00:00
break;
}
fl->tag_idx = i;
}
Resume tx immediately in response to an SGE egress update from the hardware. MFC after: 1 week
2011-03-05 03:06:38 +00:00
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
static void
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
add_fl_to_sfl(struct adapter *sc, struct sge_fl *fl)
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
mtx_lock(&sc->sfl_lock);
FL_LOCK(fl);
if ((fl->flags & FL_DOOMED) == 0) {
fl->flags |= FL_STARVING;
TAILQ_INSERT_TAIL(&sc->sfl, fl, link);
callout_reset(&sc->sfl_callout, hz / 5, refill_sfl, sc);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
FL_UNLOCK(fl);
mtx_unlock(&sc->sfl_lock);
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
static int
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
handle_sge_egr_update(struct sge_iq *iq, const struct rss_header *rss,
struct mbuf *m)
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
{
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
const struct cpl_sge_egr_update *cpl = (const void *)(rss + 1);
unsigned int qid = G_EGR_QID(ntohl(cpl->opcode_qid));
struct adapter *sc = iq->adapter;
struct sge *s = &sc->sge;
struct sge_eq *eq;
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m == NULL, ("%s: payload with opcode %02x", __func__,
rss->opcode));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
eq = s->eqmap[qid - s->eq_start];
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
EQ_LOCK(eq);
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(eq->flags & EQ_CRFLUSHED,
("%s: unsolicited egress update", __func__));
eq->flags &= ~EQ_CRFLUSHED;
eq->egr_update++;
if (__predict_false(eq->flags & EQ_DOOMED))
wakeup_one(eq);
else if (eq->flags & EQ_STALLED && can_resume_tx(eq))
taskqueue_enqueue(sc->tq[eq->tx_chan], &eq->tx_task);
EQ_UNLOCK(eq);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
}
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
static int
handle_fw_rpl(struct sge_iq *iq, const struct rss_header *rss, struct mbuf *m)
{
const struct cpl_fw6_msg *cpl = (const void *)(rss + 1);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
KASSERT(m == NULL, ("%s: payload with opcode %02x", __func__,
rss->opcode));
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
if (cpl->type == FW6_TYPE_CMD_RPL)
t4_handle_fw_rpl(iq->adapter, cpl->data);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
Many updates to cxgbe(4) - Device configuration via plain text config file. Also able to operate when not attached to the chip as the master driver. - Generic "work request" queue that serves as the base for both ctrl and ofld tx queues. - Generic interrupt handler routine that can process any event on any kind of ingress queue (via a dispatch table). - A couple of new driver ioctls. cxgbetool can now install a firmware to the card ("loadfw" command) and can read the card's memory ("memdump" and "tcb" commands). - Lots of assorted information within dev.t4nex.X.misc.* This is primarily for debugging and won't show up in sysctl -a. - Code to manage the L2 tables on the chip. - Updates to cxgbe(4) man page to go with the tunables that have changed. - Updates to the shared code in common/ - Updates to the driver-firmware interface (now at fw 1.4.16.0) MFC after: 1 month
2011-12-16 02:09:51 +00:00
return (0);
- Move all Ethernet specific items from sge_eq to sge_txq. sge_eq is now a suitable base for all kinds of egress queues. - Add control queues (sge_ctrlq) and allocate one of these per hardware channel. They can be used to program filters and steer traffic (and more). MFC after: 1 week
2011-04-19 22:08:28 +00:00
}
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
static int
- Specialized ingress queues that take interrupts for other ingress queues. Try to have a set of these per port when possible, fall back to sharing a common pool between all ports otherwise. - One control queue per port (used to be one per hardware channel). - t4_eth_rx now handles Ethernet rx only. - sysctls to display pidx/cidx for some queues. MFC after: 1 week
2011-05-30 21:34:44 +00:00
sysctl_uint16(SYSCTL_HANDLER_ARGS)
sysctl that displays the absolute queue id of an rxq.
2011-05-14 19:27:15 +00:00
{
uint16_t *id = arg1;
int i = *id;
return sysctl_handle_int(oidp, &i, 0, req);
}
Reference in New Issue Copy Permalink