freebsd-dev/sys/nfs/nfs_fha.c

535 lines
14 KiB
C
Raw Normal View History

Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*-
* Copyright (c) 2008 Isilon Inc http://www.isilon.com/
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sysproto.h>
#include <sys/kernel.h>
#include <sys/sysctl.h>
#include <sys/vnode.h>
#include <sys/malloc.h>
#include <sys/mount.h>
#include <sys/mbuf.h>
#include <sys/sbuf.h>
#include <rpc/rpc.h>
#include <nfs/nfs_fha.h>
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
static MALLOC_DEFINE(M_NFS_FHA, "NFS FHA", "NFS FHA");
/*
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
* XXX need to commonize definitions between old and new NFS code. Define
* this here so we don't include one nfsproto.h over the other.
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
#define NFS_PROG 100003
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
void
fha_init(struct fha_params *softc)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
char tmpstr[128];
int i;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
for (i = 0; i < FHA_HASH_SIZE; i++)
mtx_init(&softc->fha_hash[i].mtx, "fhalock", NULL, MTX_DEF);
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
/*
* Set the default tuning parameters.
*/
softc->ctls.enable = FHA_DEF_ENABLE;
softc->ctls.bin_shift = FHA_DEF_BIN_SHIFT;
softc->ctls.max_nfsds_per_fh = FHA_DEF_MAX_NFSDS_PER_FH;
softc->ctls.max_reqs_per_nfsd = FHA_DEF_MAX_REQS_PER_NFSD;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
* Allow the user to override the defaults at boot time with
* tunables.
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
snprintf(tmpstr, sizeof(tmpstr), "vfs.%s.fha.enable",
softc->server_name);
TUNABLE_INT_FETCH(tmpstr, &softc->ctls.enable);
snprintf(tmpstr, sizeof(tmpstr), "vfs.%s.fha.bin_shift",
softc->server_name);
TUNABLE_INT_FETCH(tmpstr, &softc->ctls.bin_shift);
snprintf(tmpstr, sizeof(tmpstr), "vfs.%s.fha.max_nfsds_per_fh",
softc->server_name);
TUNABLE_INT_FETCH(tmpstr, &softc->ctls.max_nfsds_per_fh);
snprintf(tmpstr, sizeof(tmpstr), "vfs.%s.fha.max_reqs_per_nfsd",
softc->server_name);
TUNABLE_INT_FETCH(tmpstr, &softc->ctls.max_reqs_per_nfsd);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
/*
* Add sysctls so the user can change the tuning parameters at
* runtime.
*/
SYSCTL_ADD_UINT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
OID_AUTO, "enable", CTLFLAG_RW,
&softc->ctls.enable, 0, "Enable NFS File Handle Affinity (FHA)");
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SYSCTL_ADD_UINT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
OID_AUTO, "bin_shift", CTLFLAG_RW,
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
&softc->ctls.bin_shift, 0, "For FHA reads, no two requests will "
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
"contend if they're 2^(bin_shift) bytes apart");
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SYSCTL_ADD_UINT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
OID_AUTO, "max_nfsds_per_fh", CTLFLAG_RW,
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
&softc->ctls.max_nfsds_per_fh, 0, "Maximum nfsd threads that "
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
"should be working on requests for the same file handle");
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SYSCTL_ADD_UINT(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
OID_AUTO, "max_reqs_per_nfsd", CTLFLAG_RW,
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
&softc->ctls.max_reqs_per_nfsd, 0, "Maximum requests that "
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
"single nfsd thread should be working on at any time");
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SYSCTL_ADD_OID(&softc->sysctl_ctx, SYSCTL_CHILDREN(softc->sysctl_tree),
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
OID_AUTO, "fhe_stats", CTLTYPE_STRING | CTLFLAG_RD, 0, 0,
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
softc->callbacks.fhe_stats_sysctl, "A", "");
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
void
fha_uninit(struct fha_params *softc)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
int i;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
sysctl_ctx_free(&softc->sysctl_ctx);
for (i = 0; i < FHA_HASH_SIZE; i++)
mtx_destroy(&softc->fha_hash[i].mtx);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
/*
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* This just specifies that offsets should obey affinity when within
* the same 1Mbyte (1<<20) chunk for the file (reads only for now).
*/
static void
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fha_extract_info(struct svc_req *req, struct fha_info *i,
struct fha_callbacks *cb)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
struct mbuf *md;
caddr_t dpos;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
static u_int64_t random_fh = 0;
int error;
int v3 = (req->rq_vers == 3);
rpcproc_t procnum;
/*
* We start off with a random fh. If we get a reasonable
* procnum, we set the fh. If there's a concept of offset
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* that we're interested in, we set that.
*/
i->fh = ++random_fh;
i->offset = 0;
i->locktype = LK_EXCLUSIVE;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
* Extract the procnum and convert to v3 form if necessary,
* taking care to deal with out-of-range procnums. Caller will
* ensure that rq_vers is either 2 or 3.
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
*/
procnum = req->rq_proc;
if (!v3) {
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
rpcproc_t tmp_procnum;
tmp_procnum = cb->get_procnum(procnum);
if (tmp_procnum == -1)
goto out;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
procnum = tmp_procnum;
}
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
* We do affinity for most. However, we divide a realm of affinity
* by file offset so as to allow for concurrent random access. We
* only do this for reads today, but this may change when IFS supports
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* efficient concurrent writes.
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if (cb->no_offset(procnum))
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
goto out;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
error = cb->realign(&req->rq_args, M_NOWAIT);
if (error)
goto out;
md = req->rq_args;
dpos = mtod(md, caddr_t);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/* Grab the filehandle. */
error = cb->get_fh(&i->fh, v3, &md, &dpos);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
if (error)
goto out;
/* Content ourselves with zero offset for all but reads. */
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if (cb->is_read(procnum) || cb->is_write(procnum))
cb->get_offset(&md, &dpos, v3, i);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
out:
cb->set_locktype(procnum, i);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
static struct fha_hash_entry *
fha_hash_entry_new(u_int64_t fh)
{
struct fha_hash_entry *e;
e = malloc(sizeof(*e), M_NFS_FHA, M_WAITOK);
e->fh = fh;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
e->num_rw = 0;
e->num_exclusive = 0;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
e->num_threads = 0;
LIST_INIT(&e->threads);
return (e);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
static void
fha_hash_entry_destroy(struct fha_hash_entry *e)
{
mtx_assert(e->mtx, MA_OWNED);
KASSERT(e->num_rw == 0,
("%d reqs on destroyed fhe %p", e->num_rw, e));
KASSERT(e->num_exclusive == 0,
("%d exclusive reqs on destroyed fhe %p", e->num_exclusive, e));
KASSERT(e->num_threads == 0,
("%d threads on destroyed fhe %p", e->num_threads, e));
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
free(e, M_NFS_FHA);
}
static void
fha_hash_entry_remove(struct fha_hash_entry *e)
{
mtx_assert(e->mtx, MA_OWNED);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
LIST_REMOVE(e, link);
fha_hash_entry_destroy(e);
}
static struct fha_hash_entry *
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fha_hash_entry_lookup(struct fha_params *softc, u_int64_t fh)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SVCPOOL *pool;
struct fha_hash_slot *fhs;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
struct fha_hash_entry *fhe, *new_fhe;
pool = *softc->pool;
fhs = &softc->fha_hash[fh % FHA_HASH_SIZE];
new_fhe = fha_hash_entry_new(fh);
new_fhe->mtx = &fhs->mtx;
mtx_lock(&fhs->mtx);
LIST_FOREACH(fhe, &fhs->list, link)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
if (fhe->fh == fh)
break;
if (!fhe) {
fhe = new_fhe;
LIST_INSERT_HEAD(&fhs->list, fhe, link);
} else
fha_hash_entry_destroy(new_fhe);
return (fhe);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
static void
fha_hash_entry_add_thread(struct fha_hash_entry *fhe, SVCTHREAD *thread)
{
mtx_assert(fhe->mtx, MA_OWNED);
thread->st_p2 = 0;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
LIST_INSERT_HEAD(&fhe->threads, thread, st_alink);
fhe->num_threads++;
}
static void
fha_hash_entry_remove_thread(struct fha_hash_entry *fhe, SVCTHREAD *thread)
{
mtx_assert(fhe->mtx, MA_OWNED);
KASSERT(thread->st_p2 == 0,
("%d reqs on removed thread %p", thread->st_p2, thread));
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
LIST_REMOVE(thread, st_alink);
fhe->num_threads--;
}
/*
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* Account for an ongoing operation associated with this file.
*/
static void
fha_hash_entry_add_op(struct fha_hash_entry *fhe, int locktype, int count)
{
mtx_assert(fhe->mtx, MA_OWNED);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
if (LK_EXCLUSIVE == locktype)
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fhe->num_exclusive += count;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
else
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fhe->num_rw += count;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
/*
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* Get the service thread currently associated with the fhe that is
* appropriate to handle this operation.
*/
static SVCTHREAD *
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fha_hash_entry_choose_thread(struct fha_params *softc,
struct fha_hash_entry *fhe, struct fha_info *i, SVCTHREAD *this_thread)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
SVCTHREAD *thread, *min_thread = NULL;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SVCPOOL *pool;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
int req_count, min_count = 0;
off_t offset1, offset2;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
pool = *softc->pool;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
LIST_FOREACH(thread, &fhe->threads, st_alink) {
req_count = thread->st_p2;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/* If there are any writes in progress, use the first thread. */
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if (fhe->num_exclusive) {
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
#if 0
ITRACE_CURPROC(ITRACE_NFS, ITRACE_INFO,
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
"fha: %p(%d)w", thread, req_count);
#endif
return (thread);
}
/*
* Check for read locality, making sure that we won't
* exceed our per-thread load limit in the process.
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
offset1 = i->offset;
offset2 = thread->st_p3;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if (((offset1 >= offset2)
&& ((offset1 - offset2) < (1 << softc->ctls.bin_shift)))
|| ((offset2 > offset1)
&& ((offset2 - offset1) < (1 << softc->ctls.bin_shift)))) {
if ((softc->ctls.max_reqs_per_nfsd == 0) ||
(req_count < softc->ctls.max_reqs_per_nfsd)) {
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
#if 0
ITRACE_CURPROC(ITRACE_NFS, ITRACE_INFO,
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
"fha: %p(%d)r", thread, req_count);
#endif
return (thread);
}
}
/*
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* We don't have a locality match, so skip this thread,
* but keep track of the most attractive thread in case
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* we need to come back to it later.
*/
#if 0
ITRACE_CURPROC(ITRACE_NFS, ITRACE_INFO,
"fha: %p(%d)s off1 %llu off2 %llu", thread,
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
req_count, offset1, offset2);
#endif
if ((min_thread == NULL) || (req_count < min_count)) {
min_count = req_count;
min_thread = thread;
}
}
/*
* We didn't find a good match yet. See if we can add
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* a new thread to this file handle entry's thread list.
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if ((softc->ctls.max_nfsds_per_fh == 0) ||
(fhe->num_threads < softc->ctls.max_nfsds_per_fh)) {
thread = this_thread;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
#if 0
ITRACE_CURPROC(ITRACE_NFS, ITRACE_INFO,
"fha: %p(%d)t", thread, thread->st_p2);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
#endif
fha_hash_entry_add_thread(fhe, thread);
} else {
/*
* We don't want to use any more threads for this file, so
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* go back to the most attractive nfsd we're already using.
*/
thread = min_thread;
}
return (thread);
}
/*
* After getting a request, try to assign it to some thread. Usually we
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* handle it ourselves.
*/
SVCTHREAD *
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fha_assign(SVCTHREAD *this_thread, struct svc_req *req,
struct fha_params *softc)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
SVCTHREAD *thread;
struct fha_info i;
struct fha_hash_entry *fhe;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
struct fha_callbacks *cb;
cb = &softc->callbacks;
/* Check to see whether we're enabled. */
if (softc->ctls.enable == 0)
goto thist;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
* Only do placement if this is an NFS request.
*/
if (req->rq_prog != NFS_PROG)
goto thist;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
if (req->rq_vers != 2 && req->rq_vers != 3)
goto thist;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fha_extract_info(req, &i, cb);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
* We save the offset associated with this request for later
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* nfsd matching.
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
fhe = fha_hash_entry_lookup(softc, i.fh);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
req->rq_p1 = fhe;
req->rq_p2 = i.locktype;
req->rq_p3 = i.offset;
/*
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* Choose a thread, taking into consideration locality, thread load,
* and the number of threads already working on this file.
*/
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
thread = fha_hash_entry_choose_thread(softc, fhe, &i, this_thread);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
KASSERT(thread, ("fha_assign: NULL thread!"));
fha_hash_entry_add_op(fhe, i.locktype, 1);
thread->st_p2++;
thread->st_p3 = i.offset;
/*
* Grab the pool lock here to not let chosen thread go away before
* the new request inserted to its queue while we drop fhe lock.
*/
mtx_lock(&thread->st_lock);
mtx_unlock(fhe->mtx);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
return (thread);
thist:
req->rq_p1 = NULL;
mtx_lock(&this_thread->st_lock);
return (this_thread);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
/*
* Called when we're done with an operation. The request has already
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
* been de-queued.
*/
void
fha_nd_complete(SVCTHREAD *thread, struct svc_req *req)
{
struct fha_hash_entry *fhe = req->rq_p1;
struct mtx *mtx;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
/*
* This may be called for reqs that didn't go through
* fha_assign (e.g. extra NULL ops used for RPCSEC_GSS.
*/
if (!fhe)
return;
mtx = fhe->mtx;
mtx_lock(mtx);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
fha_hash_entry_add_op(fhe, req->rq_p2, -1);
thread->st_p2--;
KASSERT(thread->st_p2 >= 0, ("Negative request count %d on %p",
thread->st_p2, thread));
if (thread->st_p2 == 0) {
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
fha_hash_entry_remove_thread(fhe, thread);
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
if (0 == fhe->num_rw + fhe->num_exclusive)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
fha_hash_entry_remove(fhe);
}
mtx_unlock(mtx);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
int
fhe_stats_sysctl(SYSCTL_HANDLER_ARGS, struct fha_params *softc)
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
{
int error, i;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
struct sbuf sb;
struct fha_hash_entry *fhe;
bool_t first, hfirst;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
SVCTHREAD *thread;
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
SVCPOOL *pool;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
sbuf_new(&sb, NULL, 65536, SBUF_FIXEDLEN);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
pool = NULL;
if (!*softc->pool) {
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
sbuf_printf(&sb, "NFSD not running\n");
goto out;
}
Revamp the old NFS server's File Handle Affinity (FHA) code so that it will work with either the old or new server. The FHA code keeps a cache of currently active file handles for NFSv2 and v3 requests, so that read and write requests for the same file are directed to the same group of threads (reads) or thread (writes). It does not currently work for NFSv4 requests. They are more complex, and will take more work to support. This improves read-ahead performance, especially with ZFS, if the FHA tuning parameters are configured appropriately. Without the FHA code, concurrent reads that are part of a sequential read from a file will be directed to separate NFS threads. This has the effect of confusing the ZFS zfetch (prefetch) code and makes sequential reads significantly slower with clients like Linux that do a lot of prefetching. The FHA code has also been updated to direct write requests to nearby file offsets to the same thread in the same way it batches reads, and the FHA code will now also send writes to multiple threads when needed. This improves sequential write performance in ZFS, because writes to a file are now more ordered. Since NFS writes (generally less than 64K) are smaller than the typical ZFS record size (usually 128K), out of order NFS writes to the same block can trigger a read in ZFS. Sending them down the same thread increases the odds of their being in order. In order for multiple write threads per file in the FHA code to be useful, writes in the NFS server have been changed to use a LK_SHARED vnode lock, and upgrade that to LK_EXCLUSIVE if the filesystem doesn't allow multiple writers to a file at once. ZFS is currently the only filesystem that allows multiple writers to a file, because it has internal file range locking. This change does not affect the NFSv4 code. This improves random write performance to a single file in ZFS, since we can now have multiple writers inside ZFS at one time. I have changed the default tuning parameters to a 22 bit (4MB) window size (from 256K) and unlimited commands per thread as a result of my benchmarking with ZFS. The FHA code has been updated to allow configuring the tuning parameters from loader tunable variables in addition to sysctl variables. The read offset window calculation has been slightly modified as well. Instead of having separate bins, each file handle has a rolling window of bin_shift size. This minimizes glitches in throughput when shifting from one bin to another. sys/conf/files: Add nfs_fha_new.c and nfs_fha_old.c. Compile nfs_fha.c when either the old or the new NFS server is built. sys/fs/nfs/nfsport.h, sys/fs/nfs/nfs_commonport.c: Bring in changes from Rick Macklem to newnfs_realign that allow it to operate in blocking (M_WAITOK) or non-blocking (M_NOWAIT) mode. sys/fs/nfs/nfs_commonsubs.c, sys/fs/nfs/nfs_var.h: Bring in a change from Rick Macklem to allow telling nfsm_dissect() whether or not to wait for mallocs. sys/fs/nfs/nfsm_subs.h: Bring in changes from Rick Macklem to create a new nfsm_dissect_nonblock() inline function and NFSM_DISSECT_NONBLOCK() macro. sys/fs/nfs/nfs_commonkrpc.c, sys/fs/nfsclient/nfs_clkrpc.c: Add the malloc wait flag to a newnfs_realign() call. sys/fs/nfsserver/nfs_nfsdkrpc.c: Setup the new NFS server's RPC thread pool so that it will call the FHA code. Add the malloc flag argument to newnfs_realign(). Unstaticize newnfs_nfsv3_procid[] so that we can use it in the FHA code. sys/fs/nfsserver/nfs_nfsdsocket.c: In nfsrvd_dorpc(), add NFSPROC_WRITE to the list of RPC types that use the LK_SHARED lock type. sys/fs/nfsserver/nfs_nfsdport.c: In nfsd_fhtovp(), if we're starting a write, check to see whether the underlying filesystem supports shared writes. If not, upgrade the lock type from LK_SHARED to LK_EXCLUSIVE. sys/nfsserver/nfs_fha.c: Remove all code that is specific to the NFS server implementation. Anything that is server-specific is now accessed through a callback supplied by that server's FHA shim in the new softc. There are now separate sysctls and tunables for the FHA implementations for the old and new NFS servers. The new NFS server has its tunables under vfs.nfsd.fha, the old NFS server's tunables are under vfs.nfsrv.fha as before. In fha_extract_info(), use callouts for all server-specific code. Getting file handles and offsets is now done in the individual server's shim module. In fha_hash_entry_choose_thread(), change the way we decide whether two reads are in proximity to each other. Previously, the calculation was a simple shift operation to see whether the offsets were in the same power of 2 bucket. The issue was that there would be a bucket (and therefore thread) transition, even if the reads were in close proximity. When there is a thread transition, reads wind up going somewhat out of order, and ZFS gets confused. The new calculation simply tries to see whether the offsets are within 1 << bin_shift of each other. If they are, the reads will be sent to the same thread. The effect of this change is that for sequential reads, if the client doesn't exceed the max_reqs_per_nfsd parameter and the bin_shift is set to a reasonable value (22, or 4MB works well in my tests), the reads in any sequential stream will largely be confined to a single thread. Change fha_assign() so that it takes a softc argument. It is now called from the individual server's shim code, which will pass in the softc. Change fhe_stats_sysctl() so that it takes a softc parameter. It is now called from the individual server's shim code. Add the current offset to the list of things printed out about each active thread. Change the num_reads and num_writes counters in the fha_hash_entry structure to 32-bit values, and rename them num_rw and num_exclusive, respectively, to reflect their changed usage. Add an enable sysctl and tunable that allows the user to disable the FHA code (when vfs.XXX.fha.enable = 0). This is useful for before/after performance comparisons. nfs_fha.h: Move most structure definitions out of nfs_fha.c and into the header file, so that the individual server shims can see them. Change the default bin_shift to 22 (4MB) instead of 18 (256K). Allow unlimited commands per thread. sys/nfsserver/nfs_fha_old.c, sys/nfsserver/nfs_fha_old.h, sys/fs/nfsserver/nfs_fha_new.c, sys/fs/nfsserver/nfs_fha_new.h: Add shims for the old and new NFS servers to interface with the FHA code, and callbacks for the The shims contain all of the code and definitions that are specific to the NFS servers. They setup the server-specific callbacks and set the server name for the sysctl and loader tunable variables. sys/nfsserver/nfs_srvkrpc.c: Configure the RPC code to call fhaold_assign() instead of fha_assign(). sys/modules/nfsd/Makefile: Add nfs_fha.c and nfs_fha_new.c. sys/modules/nfsserver/Makefile: Add nfs_fha_old.c. Reviewed by: rmacklem Sponsored by: Spectra Logic MFC after: 2 weeks
2013-04-17 21:00:22 +00:00
pool = *softc->pool;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
for (i = 0; i < FHA_HASH_SIZE; i++)
if (!LIST_EMPTY(&softc->fha_hash[i].list))
break;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
if (i == FHA_HASH_SIZE) {
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
sbuf_printf(&sb, "No file handle entries.\n");
goto out;
}
hfirst = TRUE;
for (; i < FHA_HASH_SIZE; i++) {
mtx_lock(&softc->fha_hash[i].mtx);
if (LIST_EMPTY(&softc->fha_hash[i].list)) {
mtx_unlock(&softc->fha_hash[i].mtx);
continue;
}
sbuf_printf(&sb, "%shash %d: {\n", hfirst ? "" : ", ", i);
first = TRUE;
LIST_FOREACH(fhe, &softc->fha_hash[i].list, link) {
sbuf_printf(&sb, "%sfhe %p: {\n", first ? " " : ", ", fhe);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
sbuf_printf(&sb, " fh: %ju\n", (uintmax_t) fhe->fh);
sbuf_printf(&sb, " num_rw/exclusive: %d/%d\n",
fhe->num_rw, fhe->num_exclusive);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
sbuf_printf(&sb, " num_threads: %d\n", fhe->num_threads);
LIST_FOREACH(thread, &fhe->threads, st_alink) {
sbuf_printf(&sb, " thread %p offset %ju "
"reqs %d\n", thread,
thread->st_p3, thread->st_p2);
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
sbuf_printf(&sb, " }");
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
first = FALSE;
}
sbuf_printf(&sb, "\n}");
mtx_unlock(&softc->fha_hash[i].mtx);
hfirst = FALSE;
Implement support for RPCSEC_GSS authentication to both the NFS client and server. This replaces the RPC implementation of the NFS client and server with the newer RPC implementation originally developed (actually ported from the userland sunrpc code) to support the NFS Lock Manager. I have tested this code extensively and I believe it is stable and that performance is at least equal to the legacy RPC implementation. The NFS code currently contains support for both the new RPC implementation and the older legacy implementation inherited from the original NFS codebase. The default is to use the new implementation - add the NFS_LEGACYRPC option to fall back to the old code. When I merge this support back to RELENG_7, I will probably change this so that users have to 'opt in' to get the new code. To use RPCSEC_GSS on either client or server, you must build a kernel which includes the KGSSAPI option and the crypto device. On the userland side, you must build at least a new libc, mountd, mount_nfs and gssd. You must install new versions of /etc/rc.d/gssd and /etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf. As long as gssd is running, you should be able to mount an NFS filesystem from a server that requires RPCSEC_GSS authentication. The mount itself can happen without any kerberos credentials but all access to the filesystem will be denied unless the accessing user has a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There is currently no support for situations where the ticket file is in a different place, such as when the user logged in via SSH and has delegated credentials from that login. This restriction is also present in Solaris and Linux. In theory, we could improve this in future, possibly using Brooks Davis' implementation of variant symlinks. Supporting RPCSEC_GSS on a server is nearly as simple. You must create service creds for the server in the form 'nfs/<fqdn>@<REALM>' and install them in /etc/krb5.keytab. The standard heimdal utility ktutil makes this fairly easy. After the service creds have been created, you can add a '-sec=krb5' option to /etc/exports and restart both mountd and nfsd. The only other difference an administrator should notice is that nfsd doesn't fork to create service threads any more. In normal operation, there will be two nfsd processes, one in userland waiting for TCP connections and one in the kernel handling requests. The latter process will create as many kthreads as required - these should be visible via 'top -H'. The code has some support for varying the number of service threads according to load but initially at least, nfsd uses a fixed number of threads according to the value supplied to its '-n' option. Sponsored by: Isilon Systems MFC after: 1 month
2008-11-03 10:38:00 +00:00
}
out:
sbuf_trim(&sb);
sbuf_finish(&sb);
error = sysctl_handle_string(oidp, sbuf_data(&sb), sbuf_len(&sb), req);
sbuf_delete(&sb);
return (error);
}