<!DOCTYPE linuxdoc PUBLIC "-//FreeBSD//DTD linuxdoc//EN">
<linuxdoc>
<article>
<title> Serial Basics
<author> FAQ
<date> 24 Nov 1996, (c) 1996
<abstract> This section outlines some of the basics to get your serial ports working. This is really just a stepping stone into the section on PPP or Dialout if you are interested in modems.
This section should give you some general information about serial ports. If you do not find what you want here, check into the Terminal and Dialup sections of the handbook.
<p>
The <tt/ttydX/ (or <tt/cuaaX/) device is the regular device
you will want to open for your applications. When a process opens
the device, it will have a default set of terminal I/O settings.
You can see these settings with the command
<verb>
stty -a -f /dev/ttyd1
</verb>
When you change the settings to this device, the settings are in
effect until the device is closed. When it is reopened, it goes
back to the default set. To make changes to the default set, you
can open and adjust the settings of the ``initial state'' device.
For example, to turn on <tt/CLOCAL/ mode, 8 bits, and
<tt>XON/XOFF</tt> flow control by default for ttyd5, do:
<verb>
stty -f /dev/ttyid5 clocal cs8 ixon ixoff
</verb>
A good place to do this is in <tt>/etc/rc.serial</tt>. Now, an
application will have these settings by default when it opens
<tt/ttyd5/. It can still change these settings to its liking,
though.
You can also prevent certain settings from being changed by an
application by making adjustments to the ``lock state'' device.
For example, to lock the speed of <tt/ttyd5/ to 57600 bps, do
<verb>
stty -f /dev/ttyld5 57600
</verb>
Now, an application that opens <tt/ttyd5/ and tries to change the
speed of the port will be stuck with 57600 bps.
Naturally, you should make the initial state and lock state
devices writable only by <tt/root/. The <tt/MAKEDEV/ script does
<bf/NOT/ do this when it creates the device entries.
