d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
d8c6808ade
freebsd-dev/sys/arm/at91/at91var.h

90 lines
2.4 KiB
C
Raw Normal View History

Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
/*-
* Copyright (c) 2005 Olivier Houchard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
Tweak the disclaimer section of the license to match COPYRIGHT, for better or worse. Ok'd by folks that have additional copyrights to the files in cases where there's joint authorship.
2008-11-25 00:13:26 +00:00
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
*/
/* $FreeBSD$ */
#ifndef _AT91VAR_H_
#define _AT91VAR_H_
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it.
2010-10-06 22:25:21 +00:00
#include <sys/bus.h>
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
#include <sys/rman.h>
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it.
2010-10-06 22:25:21 +00:00
#include <arm/at91/at91reg.h>
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
struct at91_softc {
device_t dev;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it.
2010-10-06 22:25:21 +00:00
bus_space_handle_t sc_aic_sh;
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
struct rman sc_irq_rman;
struct rman sc_mem_rman;
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it.
2010-10-06 22:25:21 +00:00
uint32_t sc_irq_system;
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
};
struct at91_ivar {
struct resource_list resources;
};
if_ate.c: * Support for sam9 "EMAC" controller. * Support for rmii interface to phy. at91.c & at91sam9.c: * Eliminate separate at91sam9.c file. * Add new devices to at91sam9_devs table. at91_machdep.c & at at91sam9_machdep.c: * Automatic chip type determination. * Remove compile time chip dependencies. * Eliminate separate at91sam9_machdep.c file. at91_pmc.c: * Corrected support for all of the sam926? and sam9g20 chips. * Remove compile time chip dependencies. My apologies to Greg for taking so long to take care of it.
2010-10-06 22:25:21 +00:00
struct cpu_devs
{
const char *name;
int unit;
bus_addr_t mem_base;
bus_size_t mem_len;
int irq0;
int irq1;
int irq2;
const char *parent_clk;
};
extern uint32_t at91_chip_id;
static inline int at91_is_rm92(void);
static inline int at91_is_sam9(void) ;
static inline int at91_cpu_is(u_int cpu);
static inline int
at91_is_rm92(void)
{
return (AT91_ARCH(at91_chip_id) == AT91_ARCH_RM92);
}
static inline int
at91_is_sam9(void)
{
return (AT91_ARCH(at91_chip_id) == AT91_ARCH_SAM9);
}
static inline int
at91_cpu_is(u_int cpu)
{
return (AT91_CPU(at91_chip_id) == cpu);
}
extern uint32_t at91_irq_system;
Store at91_master_clock in a global variable as opposed to a compile time constant. This allows us to potentially change it at runtime or autodetect it early in the boot (the latter being much more likely to have a good outcome).
2009-01-22 21:54:26 +00:00
extern uint32_t at91_master_clock;
Import support for the Atmel AT91RM9200 CPU/Microcontroller. This SoC is a ARM920T based CPU with a bunch of built-in peripherals. The inital import supports the SPI bus, the TWI bus (although iicbus integration is not complete), the uarts, the system timer and the onboard ethernet. Support for the Kwikbyte KB9202 (http://www.kwikbyte.com) board is also included, although there's no reason why the 9200 and the 9201 wouldn't also work. Primitive support for running under the skyeye emulator is also provided (although skyeye's support for the AT91RM9200 is a little weak). The code has been structured so that other members of Atmel's arm family can be supported in the future. The AT91SAM9260 is not presently supported due to lack of hardware. The arm7tdmi families are also not supported becasue they lack an MMU. Many thanks to cognet@ for his help and assistance in bringing up this board. He did much of the vm work and wrote parts of the uart and system timer code as well as the bus space implementation. The system boots to single user w/o problem, although the serial console is a little slow and the ethernet driver is still in flux. This work was sponsored by Timing Solutions, Corporation. I am grateful to their support of the FreeBSD project in this manner.
2006-02-04 23:32:13 +00:00
#endif /* _AT91VAR_H_ */
Reference in New Issue Copy Permalink