freebsd-dev/usr.sbin/stallion/stlload/stlload.8

125 lines
4.5 KiB
Groff
Raw Normal View History

.\" Copyright (c) 1996 Greg Ungerer (gerg@stallion.oz.au).
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\" 3. All advertising materials mentioning features or use of this software
.\" must display the following acknowledgement:
.\" This product includes software developed by Greg Ungerer.
.\" 4. Neither the name of the author nor the names of any co-contributors
.\" may be used to endorse or promote products derived from this software
.\" without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.Dd December 2, 1996
.Os FreeBSD
.Dt STLLOAD 8 i386
.Sh NAME
.Nm stlload
.Nd "Stallion Technologies multiport serial board down loader"
.Sh SYNOPSIS
.Nm stlload
.Op Fl vhVR
.Op Fl i Ar image-file
.Op Fl c Ar control-device
.Op Fl r Ar rx-buf-size
.Op Fl t Ar tx-buf-size
.Op Fl B Ar boot-banner
.Op Fl b Ar unit-number
.Sh DESCRIPTION
1997-10-20 12:51:34 +00:00
.Nm Stlload
is used to download the firmware code to Stallion Technologies intelligent
multiport serial boards.
A firmware download is only required for those boards that use the Stallion
.Nm stli
driver.
This includes the EasyConnection 8/64, ONboard and Brumby families of boards.
.Pp
Different board types require different firmware images.
If the wrong firmware is loaded into a board it will fail to operate.
.Pp
The download process is achieved through the Stallion
.Nm stli
driver control device,
.Pa /dev/staliomem? .
This device implements a file type device that can read and write into the
boards shared memory region.
It also implements a number of special
1997-10-20 12:51:34 +00:00
.Em ioctls
that reset and restart the board.
.Pp
The options are:
1997-10-20 12:51:34 +00:00
.Bl -tag -width indent
.It Fl v
Verbose output generation.
Trace is generated at each phase of the download and startup process.
.It Fl h
Output usage information.
.It Fl V
Output version information.
.It Fl R
Reset the board only.
Does not proceed to download firmware to the board.
.It Fl i Ar image-file
Specify the firmware image file to download.
1997-10-20 12:51:34 +00:00
The default firmware image is
.Pa /usr/libdata/stallion/cdk.sys .
.It Fl c Ar control-device
Specify the board control device through which to download the firmware
and start up the board.
1997-10-20 12:51:34 +00:00
The default is
.Pa /dev/staliomem0 .
.It Fl r Ar rx-buf-size
Specify the size of the boards shared memory Receive Data buffer.
By default the buffer is dynamically sized to use the maximum
available shared memory.
.It Fl t Ar tx-buf-size
Specify the size of the boards shared memory Transmit Data buffer.
By default the buffer is dynamically sized to use the maximum
available shared memory.
.It Fl B Ar boot-banner
Enable the slave debug trace flag during download.
This enables debug trace output from the firmware code.
This trace is output on port 0 of the board,
and the port is set to 9600 baud, 8 data bits, no parity and 1 stop bit.
.It Fl b Ar unit-number
Specify the unit (board) number to be downloaded. The default is to
download board 0.
.El
.Pp
1997-10-20 12:51:34 +00:00
.Nm Stlload
would typically be run from
.Pa /etc/rc.serial .
.Sh FILES
.Bl -tag -width /usr/libdata/stallion/2681.sys
.It Pa /usr/libdata/stallion/cdk.sys
firmware code to EasyConnection 8/64 class boards
.It Pa /usr/libdata/stallion/2681.sys
firmware code to ONboard and Brumby class boards
.It Pa /dev/staliomem?
driver board control device
.Sh SEE ALSO
.Xr stl 4 ,
.Xr stli 4 ,
.Xr stlstats 8
.Sh HISTORY
1997-10-20 12:51:34 +00:00
This program was originally developed by
.An Greg Ungerer Aq gerg@stallion.com .