freebsd-dev/sys/arm/at91/at91_spi.c

425 lines
11 KiB
C
Raw Normal View History

/*-
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
* Copyright (c) 2006 M. Warner Losh.
* Copyright (c) 2011-2012 Ian Lepore.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
#include <sys/lock.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/rman.h>
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
#include <sys/sx.h>
#include <machine/bus.h>
#include <arm/at91/at91_spireg.h>
#include <arm/at91/at91_pdcreg.h>
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
#include <arm/at91/at91var.h>
#include <dev/spibus/spi.h>
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
#include "spibus_if.h"
struct at91_spi_softc
{
device_t dev; /* Myself */
void *intrhand; /* Interrupt handle */
struct resource *irq_res; /* IRQ resource */
struct resource *mem_res; /* Memory resource */
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
bus_dma_tag_t dmatag; /* bus dma tag for transfers */
bus_dmamap_t map[4]; /* Maps for the transaction */
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
struct sx xfer_mtx; /* Enforce one transfer at a time */
uint32_t xfer_mask; /* Bits to wait on for completion */
uint32_t xfer_done; /* interrupt<->mainthread signaling */
};
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
#define CS_TO_MR(cs) ((~(1 << (cs)) & 0x0f) << 16)
static inline uint32_t
RD4(struct at91_spi_softc *sc, bus_size_t off)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
return (bus_read_4(sc->mem_res, off));
}
static inline void
WR4(struct at91_spi_softc *sc, bus_size_t off, uint32_t val)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
bus_write_4(sc->mem_res, off, val);
}
/* bus entry points */
static int at91_spi_attach(device_t dev);
static int at91_spi_detach(device_t dev);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
static int at91_spi_probe(device_t dev);
static int at91_spi_transfer(device_t dev, device_t child,
struct spi_command *cmd);
/* helper routines */
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
static void at91_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs,
int error);
static int at91_spi_activate(device_t dev);
static void at91_spi_deactivate(device_t dev);
2006-10-20 07:10:13 +00:00
static void at91_spi_intr(void *arg);
static int
at91_spi_probe(device_t dev)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
device_set_desc(dev, "AT91 SPI");
return (0);
}
static int
at91_spi_attach(device_t dev)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
struct at91_spi_softc *sc;
int err;
uint32_t csr;
sc = device_get_softc(dev);
sc->dev = dev;
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sx_init(&sc->xfer_mtx, device_get_nameunit(dev));
/*
* Allocate resources.
*/
err = at91_spi_activate(dev);
if (err)
goto out;
/*
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
* Set up the hardware.
*/
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sc->xfer_mask = SPI_SR_RXBUFF | (at91_is_rm92() ? 0 : SPI_SR_TXEMPTY);
WR4(sc, SPI_CR, SPI_CR_SWRST);
/* "Software Reset must be Written Twice" erratum */
WR4(sc, SPI_CR, SPI_CR_SWRST);
2006-10-20 07:10:13 +00:00
WR4(sc, SPI_IDR, 0xffffffff);
WR4(sc, SPI_MR, (0xf << 24) | SPI_MR_MSTR | SPI_MR_MODFDIS |
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
CS_TO_MR(0));
/*
* For now, run the bus at the slowest speed possible as otherwise we
* may encounter data corruption on transmit as seen with ETHERNUT5
* and AT45DB321D even though both board and slave device can take
* more.
* This also serves as a work-around for the "NPCSx rises if no data
* data is to be transmitted" erratum. The ideal workaround for the
* latter is to take the chip select control away from the peripheral
* and manage it directly as a GPIO line. The easy solution is to
* slow down the bus so dramatically that it just never gets starved
* as may be seen when the OCHI controller is running and consuming
* memory and APB bandwidth.
* Also, currently we lack a way for lettting both the board and the
* slave devices take their maximum supported SPI clocks into account.
*/
csr = SPI_CSR_CPOL | (4 << 16) | (0xff << 8);
WR4(sc, SPI_CSR0, csr);
WR4(sc, SPI_CSR1, csr);
WR4(sc, SPI_CSR2, csr);
WR4(sc, SPI_CSR3, csr);
WR4(sc, SPI_CR, SPI_CR_SPIEN);
WR4(sc, PDC_PTCR, PDC_PTCR_TXTDIS);
WR4(sc, PDC_PTCR, PDC_PTCR_RXTDIS);
WR4(sc, PDC_RNPR, 0);
WR4(sc, PDC_RNCR, 0);
WR4(sc, PDC_TNPR, 0);
WR4(sc, PDC_TNCR, 0);
WR4(sc, PDC_RPR, 0);
WR4(sc, PDC_RCR, 0);
WR4(sc, PDC_TPR, 0);
WR4(sc, PDC_TCR, 0);
RD4(sc, SPI_RDR);
RD4(sc, SPI_SR);
device_add_child(dev, "spibus", -1);
bus_generic_attach(dev);
out:
if (err)
at91_spi_deactivate(dev);
return (err);
}
static int
at91_spi_detach(device_t dev)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
return (EBUSY); /* XXX */
}
static int
at91_spi_activate(device_t dev)
{
struct at91_spi_softc *sc;
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
int err, i, rid;
sc = device_get_softc(dev);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
err = ENOMEM;
rid = 0;
sc->mem_res = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->mem_res == NULL)
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
goto out;
rid = 0;
sc->irq_res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
RF_ACTIVE);
2006-10-20 07:10:13 +00:00
if (sc->irq_res == NULL)
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
goto out;
2006-10-20 07:10:13 +00:00
err = bus_setup_intr(dev, sc->irq_res, INTR_TYPE_MISC | INTR_MPSAFE,
NULL, at91_spi_intr, sc, &sc->intrhand);
2006-10-20 07:10:13 +00:00
if (err != 0)
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
goto out;
err = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL, NULL, 2048, 1,
2048, BUS_DMA_ALLOCNOW, NULL, NULL, &sc->dmatag);
if (err != 0)
goto out;
for (i = 0; i < 4; i++) {
err = bus_dmamap_create(sc->dmatag, 0, &sc->map[i]);
if (err != 0)
goto out;
}
out:
if (err != 0)
at91_spi_deactivate(dev);
2006-10-20 07:10:13 +00:00
return (err);
}
static void
at91_spi_deactivate(device_t dev)
{
struct at91_spi_softc *sc;
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
int i;
sc = device_get_softc(dev);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
bus_generic_detach(dev);
for (i = 0; i < 4; i++)
if (sc->map[i])
bus_dmamap_destroy(sc->dmatag, sc->map[i]);
if (sc->dmatag)
bus_dma_tag_destroy(sc->dmatag);
if (sc->intrhand)
bus_teardown_intr(dev, sc->irq_res, sc->intrhand);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sc->intrhand = NULL;
if (sc->irq_res)
bus_release_resource(dev, SYS_RES_IRQ,
rman_get_rid(sc->irq_res), sc->irq_res);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sc->irq_res = NULL;
if (sc->mem_res)
bus_release_resource(dev, SYS_RES_MEMORY,
rman_get_rid(sc->mem_res), sc->mem_res);
sc->mem_res = NULL;
}
static void
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
at91_getaddr(void *arg, bus_dma_segment_t *segs, int nsegs __unused,
int error)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if (error != 0)
return;
*(bus_addr_t *)arg = segs[0].ds_addr;
}
static int
at91_spi_transfer(device_t dev, device_t child, struct spi_command *cmd)
{
struct at91_spi_softc *sc;
bus_addr_t addr;
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
int err, i, j, mode[4];
uint32_t mask;
KASSERT(cmd->tx_cmd_sz == cmd->rx_cmd_sz,
("%s: TX/RX command sizes should be equal", __func__));
KASSERT(cmd->tx_data_sz == cmd->rx_data_sz,
("%s: TX/RX data sizes should be equal", __func__));
sc = device_get_softc(dev);
i = 0;
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sx_xlock(&sc->xfer_mtx);
/*
* Disable transfers while we set things up.
*/
WR4(sc, PDC_PTCR, PDC_PTCR_TXTDIS | PDC_PTCR_RXTDIS);
#ifdef SPI_CHIPSEL_SUPPORT
if (cmd->cs < 0 || cmd->cs > 3) {
device_printf(dev,
"Invalid chip select %d requested by %s\n", cmd->cs,
device_get_nameunit(child));
err = EINVAL;
goto out;
}
#ifdef SPI_CHIP_SELECT_HIGH_SUPPORT
if (at91_is_rm92() && cmd->cs == 0 &&
(cmd->flags & SPI_CHIP_SELECT_HIGH) != 0) {
device_printf(dev,
"Invalid chip select high requested by %s\n",
device_get_nameunit(child));
err = EINVAL;
goto out;
}
#endif
WR4(sc, SPI_MR, (RD4(sc, SPI_MR) & ~0x000f0000) | CS_TO_MR(cmd->cs));
#endif
/*
* Set up the TX side of the transfer.
*/
if ((err = bus_dmamap_load(sc->dmatag, sc->map[i], cmd->tx_cmd,
cmd->tx_cmd_sz, at91_getaddr, &addr, 0)) != 0)
goto out;
WR4(sc, PDC_TPR, addr);
WR4(sc, PDC_TCR, cmd->tx_cmd_sz);
bus_dmamap_sync(sc->dmatag, sc->map[i], BUS_DMASYNC_PREWRITE);
2006-10-20 07:10:13 +00:00
mode[i++] = BUS_DMASYNC_POSTWRITE;
if (cmd->tx_data_sz > 0) {
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if ((err = bus_dmamap_load(sc->dmatag, sc->map[i],
cmd->tx_data, cmd->tx_data_sz, at91_getaddr, &addr, 0)) !=
0)
2006-10-20 07:10:13 +00:00
goto out;
WR4(sc, PDC_TNPR, addr);
WR4(sc, PDC_TNCR, cmd->tx_data_sz);
2006-10-20 07:10:13 +00:00
bus_dmamap_sync(sc->dmatag, sc->map[i], BUS_DMASYNC_PREWRITE);
mode[i++] = BUS_DMASYNC_POSTWRITE;
}
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
/*
* Set up the RX side of the transfer.
*/
if ((err = bus_dmamap_load(sc->dmatag, sc->map[i], cmd->rx_cmd,
cmd->rx_cmd_sz, at91_getaddr, &addr, 0)) != 0)
goto out;
WR4(sc, PDC_RPR, addr);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
WR4(sc, PDC_RCR, cmd->rx_cmd_sz);
bus_dmamap_sync(sc->dmatag, sc->map[i], BUS_DMASYNC_PREREAD);
2006-10-20 07:10:13 +00:00
mode[i++] = BUS_DMASYNC_POSTREAD;
if (cmd->rx_data_sz > 0) {
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if ((err = bus_dmamap_load(sc->dmatag, sc->map[i],
cmd->rx_data, cmd->rx_data_sz, at91_getaddr, &addr, 0)) !=
0)
2006-10-20 07:10:13 +00:00
goto out;
WR4(sc, PDC_RNPR, addr);
WR4(sc, PDC_RNCR, cmd->rx_data_sz);
2006-10-20 07:10:13 +00:00
bus_dmamap_sync(sc->dmatag, sc->map[i], BUS_DMASYNC_PREREAD);
mode[i++] = BUS_DMASYNC_POSTREAD;
}
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
/*
* Start the transfer, wait for it to complete.
*/
sc->xfer_done = 0;
mask = sc->xfer_mask;
WR4(sc, SPI_IER, mask);
WR4(sc, PDC_PTCR, PDC_PTCR_TXTEN | PDC_PTCR_RXTEN);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
do
err = tsleep(&sc->xfer_done, PCATCH | PZERO, "at91_spi", hz);
while (sc->xfer_done != mask && err != EINTR);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
/*
* Stop the transfer and clean things up.
*/
2006-10-20 07:10:13 +00:00
WR4(sc, PDC_PTCR, PDC_PTCR_TXTDIS | PDC_PTCR_RXTDIS);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if (err == 0)
for (j = 0; j < i; j++)
2006-10-20 07:10:13 +00:00
bus_dmamap_sync(sc->dmatag, sc->map[j], mode[j]);
out:
2006-10-20 07:10:13 +00:00
for (j = 0; j < i; j++)
bus_dmamap_unload(sc->dmatag, sc->map[j]);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sx_xunlock(&sc->xfer_mtx);
return (err);
}
2006-10-20 07:10:13 +00:00
static void
at91_spi_intr(void *arg)
{
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
struct at91_spi_softc *sc;
uint32_t mask, sr;
2006-10-20 07:10:13 +00:00
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
sc = (struct at91_spi_softc*)arg;
mask = sc->xfer_mask;
2006-10-20 07:10:13 +00:00
sr = RD4(sc, SPI_SR) & RD4(sc, SPI_IMR);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if ((sr & mask) != 0) {
sc->xfer_done |= sr & mask;
WR4(sc, SPI_IDR, mask);
wakeup(&sc->xfer_done);
2006-10-20 07:10:13 +00:00
}
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
if ((sr & ~mask) != 0) {
2006-10-20 07:10:13 +00:00
device_printf(sc->dev, "Unexpected ISR %#x\n", sr);
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
WR4(sc, SPI_IDR, sr & ~mask);
2006-10-20 07:10:13 +00:00
}
}
static devclass_t at91_spi_devclass;
static device_method_t at91_spi_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, at91_spi_probe),
DEVMETHOD(device_attach, at91_spi_attach),
DEVMETHOD(device_detach, at91_spi_detach),
/* spibus interface */
DEVMETHOD(spibus_transfer, at91_spi_transfer),
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
DEVMETHOD_END
};
static driver_t at91_spi_driver = {
"spi",
at91_spi_methods,
sizeof(struct at91_spi_softc),
};
- Prepend the device description with "AT91" to reflect its nature. [1] - Move DMA tag and map creature to at91_spi_activate() where the other resource allocation also lives. [1] - Flesh out at91_spi_deactivate(). [1] - Work around the "Software Reset must be Written Twice" erratum. - For now, run the bus at the slowest speed possible in order to work around data corruption on transit even seen with 9 MHz on ETHERNUT5 (15 MHz maximum) and AT45DB321D (20 MHz maximum). This also serves as a poor man's work-around for the "NPCSx rises if no data data is to be transmitted" erratum of RM9200. Being able to use the appropriate bus speed would require: 1) Adding a proper work-around for the RM9200 bug consisting of taking the chip select control away from the SPI peripheral and managing it directly as a GPIO line. 2) Taking the maximum frequencies supported by the actual board and the slave devices into account and basing the whole thing on the master clock instead of hardcoding a divisor as previously done. 3) Fixing the above mentioned data corruption. - KASSERT that TX/RX command and data sizes match on transfers. - Introduce a mutex ensuring that only one child device is running a SPI transfer at a time. [1] - Add preliminary, #ifdef'ed out support for setting the chip select. [1] - Use the RX instead of the TX commando size when setting up the RX side of a transfer. - For controllers having SPI_SR_TXEMPTY, i.e. !RM9200, also wait for the completion of the TX part of transfers before stopping the whole thing again. - Use DEVMETHOD_END. [1] - Use NULL instead of 0 for pointers. [1, partially] Additional testing by: Ian Lepore Submitted by: Ian Lepore [1] MFC after: 1 week
2012-06-03 00:54:10 +00:00
DRIVER_MODULE(at91_spi, atmelarm, at91_spi_driver, at91_spi_devclass, NULL,
NULL);