freebsd-dev/sys/dev/mca/mca_busreg.h

85 lines
3.2 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1999 Matthew N. Dodd <winter@jurai.net>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Standardized MCA configuration information
*/
#define MCA_MAX_SLOTS 8 /* max number of slots per bus */
#define MCA_MB_SCSI_SLOT 8
#define MCA_MB_VIDEO_SLOT 9
#define MCA_MAX_ADAPTERS 9
/*
* When an ADF file talks about a POS register
* its not talking about the same index we are
* so provide this to convert ADF pos register
* offsets to our register offsets. (Since
* to us, POS0 and POS1 are just 2 more registers
*/
#define MCA_ADP_POS(pos) (pos + 2)
#define MCA_POS0 0 /* low byte of board ID */
#define MCA_POS1 1 /* high byte of board ID */
#define MCA_POS2 2
# define MCA_POS2_ENABLE 0x01 /* POS2, hi => adapter enabled */
#define MCA_POS3 3
#define MCA_POS4 4
#define MCA_POS5 5
# define MCA_POS5_CHCK_STAT 0x40 /* lo => CHCK status available */
# define MCA_POS5_CHCK 0x80 /* lo => adapter CHCK signal */
#define MCA_POS6 6 /* low byte of CHCK status */
#define MCA_POS7 7 /* high byte of CHCK status */
/*
* MCA register addresses for IBM PS/2
*/
#define MCA_SYS_CTL_A_REG 0x92 /* PS/2 System Control Port A */
#define MCA_SYS_CTL_B_REG 0x60 /* PS/2 System Control Port B */
#define MCA_ARB_REG 0x90 /* MCA Arbitration port */
#define MCA_CSF_REG 0x91 /* MCA Card Select Feedback */
/*
* 0x96, 0x97 POS Registers
* 0x100 - 0x107 POS Registers
*/
#define MCA_MB_SETUP_REG 0x94 /* Motherboard setup register */
# define MCA_MB_SETUP_DIS 0xff /* Disable motherboard setup */
# define MCA_MB_SETUP_VIDEO 0xdf
# define MCA_MB_SETUP_SCSI 0xf7 /* Pri. SCSI setup reg */
# define MCA_MB_SETUP_SCSI_ALT 0xfd /* Alt. SCSI setup reg */
#define MCA_ADAP_SETUP_REG 0x96 /* Adapter setup register */
# define MCA_ADAP_SETUP_DIS 0x0 /* Disable adapter setup */
# define MCA_ADAP_SET 0x08 /* Adapter setup mode */
# define MCA_ADAP_CHR 0x80 /* Adapter channel reset */
#define MCA_POS_REG(n) (0x100+(n)) /* POS registers 0-7 */