freebsd-dev/sys/pci/pci_compat.c

260 lines
6.1 KiB
C
Raw Normal View History

Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* Copyright (c) 1997, Stefan Esser <se@freebsd.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $Id: pci_compat.c,v 1.23 1999/04/17 08:36:07 peter Exp $
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
*
*/
#include "opt_bus.h"
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include "pci.h"
#if NPCI > 0
/* for compatibility to FreeBSD-2.2 version of PCI code */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/interrupt.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#ifdef RESOURCE_CHECK
#include <sys/drvresource.h>
#endif
#ifdef APIC_IO
#include <machine/smp.h>
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
#ifdef PCI_COMPAT
/* ------------------------------------------------------------------------- */
u_long
pci_conf_read(pcici_t cfg, u_long reg)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
return (pci_read_config(cfg->dev, reg, 4));
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
void
pci_conf_write(pcici_t cfg, u_long reg, u_long data)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
pci_write_config(cfg->dev, reg, data, 4);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
int pci_map_port(pcici_t cfg, u_long reg, pci_port_t* pa)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_IOPORT, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
return (1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (0);
}
int pci_map_mem(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
int rid;
struct resource *res;
rid = reg;
res = bus_alloc_resource(cfg->dev, SYS_RES_MEMORY, &rid,
0, ~0, 1, RF_ACTIVE);
if (res) {
*pa = rman_get_start(res);
*va = (vm_offset_t) rman_get_virtual(res);
return (1);
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (0);
}
int
pci_map_dense(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
if (pci_map_mem(cfg, reg, va, pa)){
#ifdef __alpha__
vm_offset_t dense;
if(dense = pci_cvt_to_dense(*pa)){
*pa = dense;
*va = ALPHA_PHYS_TO_K0SEG(*pa);
return (1);
}
#endif
#ifdef __i386__
return(1);
#endif
}
return (0);
}
int
pci_map_bwx(pcici_t cfg, u_long reg, vm_offset_t* va, vm_offset_t* pa)
{
if (pci_map_mem(cfg, reg, va, pa)){
#ifdef __alpha__
vm_offset_t bwx;
if(bwx = pci_cvt_to_bwx(*pa)){
*pa = bwx;
*va = ALPHA_PHYS_TO_K0SEG(*pa);
return (1);
}
#endif
#ifdef __i386__
return(1);
#endif
}
return (0);
}
int
pci_map_int(pcici_t cfg, pci_inthand_t *handler, void *arg, intrmask_t *maskptr)
{
return (pci_map_int_right(cfg, handler, arg, maskptr, 0));
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
int
pci_map_int_right(pcici_t cfg, pci_inthand_t *handler, void *arg,
intrmask_t *maskptr, u_int flags)
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
{
int error;
#ifdef APIC_IO
int nextpin, muxcnt;
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
if (cfg->intpin != 0) {
int irq = cfg->intline;
driver_t *driver = device_get_driver(cfg->dev);
int rid = 0;
struct resource *res;
void *ih;
res = bus_alloc_resource(cfg->dev, SYS_RES_IRQ, &rid,
irq, irq, 1, RF_SHAREABLE|RF_ACTIVE);
if (!res) {
printf("pci_map_int: can't allocate interrupt\n");
return 0;
}
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
/*
* This is ugly. Translate the mask into a driver type.
*/
if (maskptr == &tty_imask)
driver->type |= DRIVER_TYPE_TTY;
else if (maskptr == &bio_imask)
driver->type |= DRIVER_TYPE_BIO;
else if (maskptr == &net_imask)
driver->type |= DRIVER_TYPE_NET;
else if (maskptr == &cam_imask)
driver->type |= DRIVER_TYPE_CAM;
error = BUS_SETUP_INTR(device_get_parent(cfg->dev), cfg->dev,
res, handler, arg, &ih);
if (error != 0)
return 0;
#ifdef NEW_BUS_PCI
/*
* XXX this apic stuff looks totally busted. It should
* move to the nexus code which actually registers the
* interrupt.
*/
#endif
#ifdef APIC_IO
nextpin = next_apic_irq(irq);
if (nextpin < 0)
return 1;
/*
* Attempt handling of some broken mp tables.
*
* It's OK to yell (since the mp tables are broken).
*
* Hanging in the boot is not OK
*/
muxcnt = 2;
nextpin = next_apic_irq(nextpin);
while (muxcnt < 5 && nextpin >= 0) {
muxcnt++;
nextpin = next_apic_irq(nextpin);
}
if (muxcnt >= 5) {
printf("bogus MP table, more than 4 IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n");
return 0;
}
printf("bogus MP table, %d IO APIC pins connected to the same PCI device or ISA/EISA interrupt\n", muxcnt);
nextpin = next_apic_irq(irq);
while (nextpin >= 0) {
rid = 0;
res = bus_alloc_resource(cfg->dev, SYS_RES_IRQ, &rid,
nextpin, nextpin, 1,
RF_SHAREABLE|RF_ACTIVE);
if (!res) {
printf("pci_map_int: can't allocate extra interrupt\n");
return 0;
}
error = BUS_SETUP_INTR(device_get_parent(cfg->dev),
cfg->dev, res, handler, arg,
&ih);
if (error != 0) {
printf("pci_map_int: BUS_SETUP_INTR failed\n");
return 0;
}
printf("Registered extra interrupt handler for int %d (in addition to int %d)\n", nextpin, irq);
nextpin = next_apic_irq(nextpin);
}
#endif
Completely replace the PCI bus driver code to make it better reflect reality. There will be a new call interface, but for now the file pci_compat.c (which is to be deleted, after all drivers are converted) provides an emulation of the old PCI bus driver functions. The only change that might be visible to drivers is, that the type pcici_t (which had been meant to be just a handle, whose exact definition should not be relied on), has been converted into a pcicfgregs* . The Tekram AMD SCSI driver bogusly relied on the definition of pcici_t and has been converted to just call the PCI drivers functions to access configuration space register, instead of inventing its own ... This code is by no means complete, but assumed to be fully operational, and brings the official code base more in line with my development code. A new generic device descriptor data type has to be agreed on. The PCI code will then use that data type to provide new functionality: 1) userconfig support 2) "wired" PCI devices 3) conflicts checking against ISA/EISA 4) maps will depend on the command register enable bits 5) PCI to Anything bridges can be defined as devices, and are probed like any "standard" PCI device. The following features are currently missing, but will be added back, soon: 1) unknown device probe message 2) suppression of "mirrored" devices caused by ancient, broken chip-sets This code relies on generic shared interrupt support just commited to kern_intr.c (plus the modifications of isa.c and isa_device.h).
1997-05-26 15:08:43 +00:00
}
return (1);
}
int
pci_unmap_int(pcici_t cfg)
{
return (0); /* not supported, yet, since cfg doesn't know about idesc */
}
#endif /* PCI_COMPAT */
#endif /* NPCI > 0 */