d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
dcc1299f0b
freebsd-dev/sys/kern/vfs_subr.c

5545 lines
141 KiB
C
Raw Normal View History

/* -> /*- for copyright notices, minor format tweaks as necessary
2005-01-06 23:35:40 +00:00
/*-
sys: further adoption of SPDX licensing ID tags. Mainly focus on files that use BSD 3-Clause license. The Software Package Data Exchange (SPDX) group provides a specification to make it easier for automated tools to detect and summarize well known opensource licenses. We are gradually adopting the specification, noting that the tags are considered only advisory and do not, in any way, superceed or replace the license texts. Special thanks to Wind River for providing access to "The Duke of Highlander" tool: an older (2014) run over FreeBSD tree was useful as a starting point.
2017-11-20 19:43:44 +00:00
* SPDX-License-Identifier: BSD-3-Clause
*
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Copyright (c) 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* All or some portions of this file are derived from material licensed
* to the University of California by American Telephone and Telegraph
* Co. or Unix System Laboratories, Inc. and are reproduced herein with
* the permission of UNIX System Laboratories, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
Renumber license clauses in sys/kern to avoid skipping #3
2016-09-15 13:16:20 +00:00
* 3. Neither the name of the University nor the names of its contributors
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* @(#)vfs_subr.c 8.31 (Berkeley) 5/26/95
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
/*
* External virtual filesystem routines
*/
Use __FBSDID().
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
Convert DDB to new-style option.
1996-01-04 21:13:23 +00:00
#include "opt_ddb.h"
Add the watchdogs patting during the (shutdown time) disk syncing and disk dumping. With the option SW_WATCHDOG on, these operations are doomed to let watchdog fire, fi they take too long. I implemented the stubs this way because I really want wdog_kern_* KPI to not be dependant by SW_WATCHDOG being on (and really, the option only enables watchdog activation in hardclock) and also avoid to call them when not necessary (avoiding not-volountary watchdog activations). Sponsored by: Sandvine Incorporated Discussed with: emaste, des MFC after: 2 weeks
2011-04-28 16:02:05 +00:00
#include "opt_watchdog.h"
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/systm.h>
Separate the struct bio related stuff out of <sys/buf.h> into <sys/bio.h>. <sys/bio.h> is now a prerequisite for <sys/buf.h> but it shall not be made a nested include according to bdes teachings on the subject of nested includes. Diskdrivers and similar stuff below specfs::strategy() should no longer need to include <sys/buf.> unless they need caching of data. Still a few bogus uses of struct buf to track down. Repocopy by: peter
2000-05-05 09:59:14 +00:00
#include <sys/bio.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/buf.h>
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
#include <sys/condvar.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/conf.h>
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
#include <sys/counter.h>
Introduce vfs_read_dirent() which can help VOP_READDIR() implementations by handling all the cookie stuff.
2005-09-12 08:46:07 +00:00
#include <sys/dirent.h>
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
#include <sys/event.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/eventhandler.h>
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
#include <sys/extattr.h>
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
#include <sys/file.h>
Restored rev.1.31 which was clobbered by rev.1.69 (the big Lite2 merge). This fixes at least hanging in revoke(2) when a somewhat active slave pty is revoked. The hang made the window for the null pointer bug in ufsspec_{read,write} much larger. There are many other bugs in this area (revoke of an active fifo at best leaks memory...).
1998-12-24 12:07:16 +00:00
#include <sys/fcntl.h>
Fix jails and jail-friendly file systems handling: - We need to allow for PRIV_VFS_MOUNT_OWNER inside a jail. - Move security checks to vfs_suser() and deny unmounting and updating for jailed root from different jails, etc. OK'ed by: rwatson
2007-04-13 23:54:22 +00:00
#include <sys/jail.h>
Update for the KDB framework: o Call kdb_enter() instead of Debugger().
2004-07-10 21:47:53 +00:00
#include <sys/kdb.h>
Fixed support for DIAGNOSTIC option. SYSCTL_INT() depends on kernel.h.
1995-11-16 09:45:23 +00:00
#include <sys/kernel.h>
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
#include <sys/kthread.h>
Move the head of byte-level advisory lock list from the filesystem-specific vnode data to the struct vnode. Provide the default implementation for the vop_advlock and vop_advlockasync. Purge the locks on the vnode reclaim by using the lf_purgelocks(). The default implementation is augmented for the nfs and smbfs. In the nfs_advlock, push the Giant inside the nfs_dolock. Before the change, the vop_advlock and vop_advlockasync have taken the unlocked vnode and dereferenced the fs-private inode data, racing with with the vnode reclamation due to forced unmount. Now, the vop_getattr under the shared vnode lock is used to obtain the inode size, and later, in the lf_advlockasync, after locking the vnode interlock, the VI_DOOMED flag is checked to prevent an operation on the doomed vnode. The implementation of the lf_purgelocks() is submitted by dfr. Reported by: kris Tested by: kris, pho Discussed with: jeff, dfr MFC after: 2 weeks
2008-04-16 11:33:32 +00:00
#include <sys/lockf.h>
Include file cleanup; mac.h and malloc.h at one point had ordering relationship requirements, and no longer do. Reminded by: bde
2002-08-01 17:47:56 +00:00
#include <sys/malloc.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/mount.h>
Change NDFREE() from a macro to a function for the time being; the macro version caused intolerable bloat (30k). I'm likely to revisit this with an attempt at a smarter macro. Bloat noticed by: bde
2000-01-08 16:20:06 +00:00
#include <sys/namei.h>
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
#include <sys/pctrie.h>
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
#include <sys/priv.h>
Don't attempt to trigger the syncer thread final sync code in the shutdown_pre_sync state if the RB_NOSYNC flag is set. This is the likely cause of hangs after a system panic that are keeping crash dumps from being done. This is a MFC candidate for RELENG_5. MFC after: 3 days
2004-08-20 19:21:47 +00:00
#include <sys/reboot.h>
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
#include <sys/refcount.h>
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
#include <sys/rwlock.h>
- Restore dropping the priority of syncer down to PPAUSE when it is idle. This was lost when it was converted to using a condition variable instead of lbolt. - Drop the priority of flowtable down to PPAUSE when it is idle as well since it is a similar background task. MFC after: 2 weeks
2011-01-06 22:17:07 +00:00
#include <sys/sched.h>
Switch the sleep/wakeup and condition variable implementations to use the sleep queue interface: - Sleep queues attempt to merge some of the benefits of both sleep queues and condition variables. Having sleep qeueus in a hash table avoids having to allocate a queue head for each wait channel. Thus, struct cv has shrunk down to just a single char * pointer now. However, the hash table does not hold threads directly, but queue heads. This means that once you have located a queue in the hash bucket, you no longer have to walk the rest of the hash chain looking for threads. Instead, you have a list of all the threads sleeping on that wait channel. - Outside of the sleepq code and the sleep/cv code the kernel no longer differentiates between cv's and sleep/wakeup. For example, calls to abortsleep() and cv_abort() are replaced with a call to sleepq_abort(). Thus, the TDF_CVWAITQ flag is removed. Also, calls to unsleep() and cv_waitq_remove() have been replaced with calls to sleepq_remove(). - The sched_sleep() function no longer accepts a priority argument as sleep's no longer inherently bump the priority. Instead, this is soley a propery of msleep() which explicitly calls sched_prio() before blocking. - The TDF_ONSLEEPQ flag has been dropped as it was never used. The associated TDF_SET_ONSLEEPQ and TDF_CLR_ON_SLEEPQ macros have also been dropped and replaced with a single explicit clearing of td_wchan. TD_SET_ONSLEEPQ() would really have only made sense if it had taken the wait channel and message as arguments anyway. Now that that only happens in one place, a macro would be overkill.
2004-02-27 18:52:44 +00:00
#include <sys/sleepqueue.h>
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
#include <sys/smp.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <sys/stat.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/sysctl.h>
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
#include <sys/syslog.h>
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
#include <sys/vmmeter.h>
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
#include <sys/vnode.h>
Add the watchdogs patting during the (shutdown time) disk syncing and disk dumping. With the option SW_WATCHDOG on, these operations are doomed to let watchdog fire, fi they take too long. I implemented the stubs this way because I really want wdog_kern_* KPI to not be dependant by SW_WATCHDOG being on (and really, the option only enables watchdog activation in hardclock) and also avoid to call them when not necessary (avoiding not-volountary watchdog activations). Sponsored by: Sandvine Incorporated Discussed with: emaste, des MFC after: 2 weeks
2011-04-28 16:02:05 +00:00
#include <sys/watchdog.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
#include <machine/stdarg.h>
Complete break-out of sys/sys/mac.h into sys/security/mac/mac_framework.h begun with a repo-copy of mac.h to mac_framework.h. sys/mac.h now contains the userspace and user<->kernel API and definitions, with all in-kernel interfaces moved to mac_framework.h, which is now included across most of the kernel instead. This change is the first step in a larger cleanup and sweep of MAC Framework interfaces in the kernel, and will not be MFC'd. Obtained from: TrustedBSD Project Sponsored by: SPARTA
2006-10-22 11:52:19 +00:00
#include <security/mac/mac_framework.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#include <vm/vm.h>
Untangled the vm.h include file spaghetti.
1995-12-07 12:48:31 +00:00
#include <vm/vm_object.h>
#include <vm/vm_extern.h>
Some performance improvements, and code cleanups (including changing our expensive OFF_TO_IDX to btoc whenever possible.)
1997-12-19 09:03:37 +00:00
#include <vm/pmap.h>
#include <vm/vm_map.h>
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
#include <vm/vm_page.h>
Make the maximum number of vnodes a function of both the physical memory size and the kernel's heap size, specifically, vm_kmem_size. This function allows a maximum of 40% of the vm_kmem_size to be used for vnodes and vm objects. This is a conservative bound based upon recent problem reports. (In other words, a slight increase in this percentage may be safe.) Finally, machines with less than ~3GB of RAM should be unaffected by this change, i.e., the maximum number of vnodes should remain the same. If necessary, machines with 3GB or more of RAM can increase the maximum number of vnodes by increasing vm_kmem_size. Desired by: scottl Tested by: jake Approved by: re (rwatson,scottl)
2003-05-23 19:54:02 +00:00
#include <vm/vm_kern.h>
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
#include <vm/uma.h>
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add 'show vnode <addr>' DDB command.
2006-09-04 22:15:44 +00:00
#ifdef DDB
#include <ddb/ddb.h>
#endif
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
static void delmntque(struct vnode *vp);
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
static int flushbuflist(struct bufv *bufv, int flags, struct bufobj *bo,
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
int slpflag, int slptimeo);
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
static void syncer_shutdown(void *arg, int howto);
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
static int vtryrecycle(struct vnode *vp);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
static void v_init_counters(struct vnode *);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
static void v_incr_usecount(struct vnode *);
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
static void v_incr_usecount_locked(struct vnode *);
vfs: move si_usecount manipulation to dedicated functions Reviewed by: kib
2015-07-11 16:28:12 +00:00
static void v_incr_devcount(struct vnode *);
static void v_decr_devcount(struct vnode *);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
static void vgonel(struct vnode *);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
static void vfs_knllock(void *arg);
static void vfs_knlunlock(void *arg);
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
static void vfs_knl_assert_locked(void *arg);
static void vfs_knl_assert_unlocked(void *arg);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
static void vnlru_return_batches(struct vfsops *mnt_op);
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
static void destroy_vpollinfo(struct vpollinfo *vi);
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Number of vnodes in existence. Increased whenever getnewvnode()
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
* allocates a new vnode, decreased in vdropl() for VI_DOOMED vnode.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Staticized.
1997-11-22 08:35:46 +00:00
static unsigned long numvnodes;
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. Commit the kernel changes.
2011-01-12 19:54:19 +00:00
SYSCTL_ULONG(_vfs, OID_AUTO, numvnodes, CTLFLAG_RD, &numvnodes, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Number of vnodes in existence");
Completed function declarations and/or added prototypes.
1995-12-02 18:58:56 +00:00
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
static counter_u64_t vnodes_created;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, vnodes_created, CTLFLAG_RD, &vnodes_created,
"Number of vnodes created by getnewvnode");
Add two new counters for vnode life cycle events: - vfs.recycles counts the number of vnodes forcefully recycled to avoid exceeding kern.maxvnodes. - vfs.vnodes_created counts the number of vnodes created by successful calls to getnewvnode(). Differential Revision: https://reviews.freebsd.org/D1671 Reviewed by: kib MFC after: 1 week
2015-02-14 17:02:51 +00:00
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
static u_long mnt_free_list_batch = 128;
SYSCTL_ULONG(_vfs, OID_AUTO, mnt_free_list_batch, CTLFLAG_RW,
&mnt_free_list_batch, 0, "Limit of vnodes held on mnt's free list");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
* Conversion tables for conversion from vnode types to inode formats
* and back.
*/
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
enum vtype iftovt_tab[16] = {
VNON, VFIFO, VCHR, VNON, VDIR, VNON, VBLK, VNON,
VREG, VNON, VLNK, VNON, VSOCK, VNON, VNON, VBAD,
};
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
int vttoif_tab[10] = {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
0, S_IFREG, S_IFDIR, S_IFBLK, S_IFCHR, S_IFLNK,
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
S_IFSOCK, S_IFIFO, S_IFMT, S_IFMT
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
};
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
/*
* List of vnodes that are ready for recycling.
*/
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
static TAILQ_HEAD(freelst, vnode) vnode_free_list;
Fix some vnode management problems, and better mgmt of vnode free list. Fix the UIO optimization code. Fix an assumption in vm_map_insert regarding allocation of swap pagers. Fix an spl problem in the collapse handling in vm_object_deallocate. When pages are freed from vnode objects, and the criteria for putting the associated vnode onto the free list is reached, either put the vnode onto the list, or put it onto an interrupt safe version of the list, for further transfer onto the actual free list. Some minor syntax changes changing pre-decs, pre-incs to post versions. Remove a bogus timeout (that I added for debugging) from vn_lock. PHK will likely still have problems with the vnode list management, and so do I, but it is better than it was.
1998-01-12 01:46:33 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* "Free" vnode target. Free vnodes are rarely completely free, but are
* just ones that are cheap to recycle. Usually they are for files which
* have been stat'd but not read; these usually have inode and namecache
* data attached to them. This target is the preferred minimum size of a
* sub-cache consisting mostly of such files. The system balances the size
* of this sub-cache with its complement to try to prevent either from
* thrashing while the other is relatively inactive. The targets express
* a preference for the best balance.
*
* "Above" this target there are 2 further targets (watermarks) related
* to recyling of free vnodes. In the best-operating case, the cache is
* exactly full, the free list has size between vlowat and vhiwat above the
* free target, and recycling from it and normal use maintains this state.
* Sometimes the free list is below vlowat or even empty, but this state
* is even better for immediate use provided the cache is not full.
* Otherwise, vnlru_proc() runs to reclaim enough vnodes (usually non-free
* ones) to reach one of these states. The watermarks are currently hard-
* coded as 4% and 9% of the available space higher. These and the default
* of 25% for wantfreevnodes are too large if the memory size is large.
* E.g., 9% of 75% of MAXVNODES is more than 566000 vnodes to reclaim
* whenever vnlru_proc() becomes active.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
static u_long wantfreevnodes;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
SYSCTL_ULONG(_vfs, OID_AUTO, wantfreevnodes, CTLFLAG_RW,
&wantfreevnodes, 0, "Target for minimum number of \"free\" vnodes");
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static u_long freevnodes;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
SYSCTL_ULONG(_vfs, OID_AUTO, freevnodes, CTLFLAG_RD,
&freevnodes, 0, "Number of \"free\" vnodes");
Add a knob to allow reclaim of the directory vnodes that are source of the namecache records. The reclamation is not enabled by default because for typical workload it would make namecache unusable, but large nested directory tree easily puts any process that accesses filesystem into 1 second wait for vlru. Reported by: yar (long time ago) MFC after: 3 days
2009-12-28 15:35:39 +00:00
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
static counter_u64_t recycles_count;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, recycles, CTLFLAG_RD, &recycles_count,
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
"Number of vnodes recycled to meet vnode cache targets");
Add two new counters for vnode life cycle events: - vfs.recycles counts the number of vnodes forcefully recycled to avoid exceeding kern.maxvnodes. - vfs.vnodes_created counts the number of vnodes created by successful calls to getnewvnode(). Differential Revision: https://reviews.freebsd.org/D1671 Reviewed by: kib MFC after: 1 week
2015-02-14 17:02:51 +00:00
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Various variables used for debugging the new implementation of
* reassignbuf().
* XXX these are probably of (very) limited utility now.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
static int reassignbufcalls;
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
SYSCTL_INT(_vfs, OID_AUTO, reassignbufcalls, CTLFLAG_RW, &reassignbufcalls, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Number of calls to reassignbuf");
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
static counter_u64_t free_owe_inact;
SYSCTL_COUNTER_U64(_vfs, OID_AUTO, free_owe_inact, CTLFLAG_RD, &free_owe_inact,
vfs_msync(), called from syncer vnode fsync VOP, only iterates over the active vnode list for the given mount point, with the assumption that vnodes with dirty pages are active. This is enforced by vinactive() doing vm_object_page_clean() pass over the vnode pages. The issue is, if vinactive() cannot be called during vput() due to the vnode being only shared-locked, we might end up with the dirty pages for the vnode on the free list. Such vnode is invisible to syncer, and pages are only cleaned on the vnode reactivation. In other words, the race results in the broken guarantee that user data, written through the mmap(2), is written to the disk not later than in 30 seconds after the write. Fix this by keeping the vnode which is freed but still owing inactivation, on the active list. When syncer loops find such vnode, it is deactivated and cleaned by the final vput() call. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-06-17 04:46:58 +00:00
"Number of times free vnodes kept on active list due to VFS "
"owing inactivation");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* To keep more than one thread at a time from running vfs_getnewfsid */
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
static struct mtx mntid_mtx;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
- Extend the vnode_free_list_mtx to cover numvnodes and freevnodes. This was done only some of the time before, and now it is uniformly applied.
2002-08-13 05:29:48 +00:00
/*
* Lock for any access to the following:
* vnode_free_list
* numvnodes
* freevnodes
*/
Convert all simplelocks to mutexes and remove the simplelock implementations.
2001-01-24 12:35:55 +00:00
static struct mtx vnode_free_list_mtx;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Publicly exported FS */
struct nfs_public nfs_pub;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
static uma_zone_t buf_trie_zone;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
/* Zone for allocation of new vnodes - used exclusively by getnewvnode() */
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
static uma_zone_t vnode_zone;
static uma_zone_t vnodepoll_zone;
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* The workitem queue.
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
*
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
* It is useful to delay writes of file data and filesystem metadata
* for tens of seconds so that quickly created and deleted files need
* not waste disk bandwidth being created and removed. To realize this,
* we append vnodes to a "workitem" queue. When running with a soft
* updates implementation, most pending metadata dependencies should
* not wait for more than a few seconds. Thus, mounted on block devices
* are delayed only about a half the time that file data is delayed.
* Similarly, directory updates are more critical, so are only delayed
* about a third the time that file data is delayed. Thus, there are
* SYNCER_MAXDELAY queues that are processed round-robin at a rate of
* one each second (driven off the filesystem syncer process). The
* syncer_delayno variable indicates the next queue that is to be processed.
* Items that need to be processed soon are placed in this queue:
*
* syncer_workitem_pending[syncer_delayno]
*
* A delay of fifteen seconds is done by placing the request fifteen
* entries later in the queue:
*
* syncer_workitem_pending[(syncer_delayno + 15) & syncer_mask]
*
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static int syncer_delayno;
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
static long syncer_mask;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
LIST_HEAD(synclist, bufobj);
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
static struct synclist *syncer_workitem_pending;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
/*
* The sync_mtx protects:
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
* bo->bo_synclist
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
* sync_vnode_count
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
* syncer_delayno
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
* syncer_state
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
* syncer_workitem_pending
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
* syncer_worklist_len
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
* rushjob
*/
static struct mtx sync_mtx;
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
static struct cv sync_wakeup;
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
#define SYNCER_MAXDELAY 32
Staticize.
1998-12-21 23:38:33 +00:00
static int syncer_maxdelay = SYNCER_MAXDELAY; /* maximum delay time */
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int syncdelay = 30; /* max time to delay syncing data */
static int filedelay = 30; /* time to delay syncing files */
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, filedelay, CTLFLAG_RW, &filedelay, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Time to delay syncing files (in seconds)");
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int dirdelay = 29; /* time to delay syncing directories */
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, dirdelay, CTLFLAG_RW, &dirdelay, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Time to delay syncing directories (in seconds)");
syncdelay, filedelay, dirdelay, metadelay are ints, not time_t's, and can also be made static.
2001-10-27 19:58:56 +00:00
static int metadelay = 28; /* time to delay syncing metadata */
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
SYSCTL_INT(_kern, OID_AUTO, metadelay, CTLFLAG_RW, &metadelay, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Time to delay syncing metadata (in seconds)");
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
static int rushjob; /* number of slots to run ASAP */
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
static int stat_rush_requests; /* number of times I/O speeded up */
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
SYSCTL_INT(_debug, OID_AUTO, rush_requests, CTLFLAG_RW, &stat_rush_requests, 0,
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"Number of times I/O speeded up (rush requests)");
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
/*
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
* When shutting down the syncer, run it at four times normal speed.
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
*/
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
#define SYNCER_SHUTDOWN_SPEEDUP 4
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
static int sync_vnode_count;
static int syncer_worklist_len;
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
static enum { SYNCER_RUNNING, SYNCER_SHUTTING_DOWN, SYNCER_FINAL_DELAY }
syncer_state;
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/* Target for maximum number of vnodes. */
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
int desiredvnodes;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
static int gapvnodes; /* gap between wanted and desired */
static int vhiwat; /* enough extras after expansion */
static int vlowat; /* minimal extras before expansion */
static int vstir; /* nonzero to stir non-free vnodes */
static volatile int vsmalltrigger = 8; /* pref to keep if > this many pages */
Track changes to kern.maxvnodes and appropriately increase or decrease the size of the name cache hash table (mapping file names to vnodes) and the vnode hash table (mapping mount point and inode number to vnode). An appropriate locking strategy is the key to changing hash table sizes while they are in active use. Reviewed by: kib Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D2265 MFC after: 2 weeks
2015-09-06 05:50:51 +00:00
static int
sysctl_update_desiredvnodes(SYSCTL_HANDLER_ARGS)
{
int error, old_desiredvnodes;
old_desiredvnodes = desiredvnodes;
if ((error = sysctl_handle_int(oidp, arg1, arg2, req)) != 0)
return (error);
if (old_desiredvnodes != desiredvnodes) {
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
wantfreevnodes = desiredvnodes / 4;
/* XXX locking seems to be incomplete. */
Track changes to kern.maxvnodes and appropriately increase or decrease the size of the name cache hash table (mapping file names to vnodes) and the vnode hash table (mapping mount point and inode number to vnode). An appropriate locking strategy is the key to changing hash table sizes while they are in active use. Reviewed by: kib Tested by: Peter Holm Differential Revision: https://reviews.freebsd.org/D2265 MFC after: 2 weeks
2015-09-06 05:50:51 +00:00
vfs_hash_changesize(desiredvnodes);
cache_changesize(desiredvnodes);
}
return (0);
}
SYSCTL_PROC(_kern, KERN_MAXVNODES, maxvnodes,
CTLTYPE_INT | CTLFLAG_MPSAFE | CTLFLAG_RW, &desiredvnodes, 0,
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
sysctl_update_desiredvnodes, "I", "Target for maximum number of vnodes");
sysctl(9) cleanup checkpoint: amd64 GENERIC builds cleanly. Commit the kernel changes.
2011-01-12 19:54:19 +00:00
SYSCTL_ULONG(_kern, OID_AUTO, minvnodes, CTLFLAG_RW,
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
&wantfreevnodes, 0, "Old name for vfs.wantfreevnodes (legacy)");
Do not initialize static/global variables to 0. Use bss instead of taking up space in the data section.
2001-12-19 01:35:18 +00:00
static int vnlru_nowhere;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW,
&vnlru_nowhere, 0, "Number of times the vnlru process ran without success");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add a trivial comment to record the proper commit log for r245407: Set the v_hash for a new vnode in the getnewvnode() to the value calculated based on the vnode structure address. Filesystems using vfs_hash_insert() override the v_hash using the standard formula of (inode_number + mnt_hashseed). For other filesystems, the initialization allows the vfs_hash_index() to provide useful hash too. Suggested, reviewed and tested by: peter Sponsored by: The FreeBSD Foundation MFC after: 5 days
2013-01-14 05:52:23 +00:00
/* Shift count for (uintptr_t)vp to initialize vp->v_hash. */
diff --git a/sys/kern/vfs_subr.c b/sys/kern/vfs_subr.c index 7c243b6..0bdaf36 100644 --- a/sys/kern/vfs_subr.c +++ b/sys/kern/vfs_subr.c @@ -279,6 +279,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, #define VSHOULDFREE(vp) (!((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDBUSY(vp) (((vp)->v_iflag & VI_FREE) && (vp)->v_holdcnt) +static int vnsz2log; /* * Initialize the vnode management data structures. @@ -293,6 +294,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, static void vntblinit(void *dummy __unused) { + u_int i; int physvnodes, virtvnodes; /* @@ -332,6 +334,9 @@ vntblinit(void *dummy __unused) syncer_maxdelay = syncer_mask + 1; mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF); cv_init(&sync_wakeup, "syncer"); + for (i = 1; i <= sizeof(struct vnode); i <<= 1) + vnsz2log++; + vnsz2log--; } SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL); @@ -1067,6 +1072,14 @@ alloc: } rangelock_init(&vp->v_rl); + /* + * For the filesystems which do not use vfs_hash_insert(), + * still initialize v_hash to have vfs_hash_index() useful. + * E.g., nullfs uses vfs_hash_index() on the lower vnode for + * its own hashing. + */ + vp->v_hash = (uintptr_t)vp >> vnsz2log; + *vpp = vp; return (0); }
2013-01-14 05:42:54 +00:00
static int vnsz2log;
- Now that there are no external users of vfree() make it static. - Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so no one else attempts to grow a dependency on them. - Now that objects with pages hold the vnode we don't have to do unlocked checks for the page count in the vm object in VSHOULDFREE. These three macros could simply check for holdcnt state transitions to determine whether the vnode is on the free list already, but the extra safety the flag affords us is probably worth the minimal cost. - The leafonly sysctl and code have been dead for several years now, remove the sysctl and the code that employed it from vtryrecycle(). - vtryrecycle() also no longer has to check the object's page count as the object holds the vnode until it reaches 0. Sponsored by: Isilon Systems, Inc.
2005-03-15 14:38:16 +00:00
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
/*
* Support for the bufobj clean & dirty pctrie.
*/
static void *
buf_trie_alloc(struct pctrie *ptree)
{
return uma_zalloc(buf_trie_zone, M_NOWAIT);
}
static void
buf_trie_free(struct pctrie *ptree, void *node)
{
uma_zfree(buf_trie_zone, node);
}
PCTRIE_DEFINE(BUF, buf, b_lblkno, buf_trie_alloc, buf_trie_free);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Initialize the vnode management data structures.
Update the "desiredvnodes" calculation. In particular, make the part of the calculation that is based on the kernel's heap size more conservative. Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the time being set MAXVNODES_MAX to a large value. Reviewed by: jhb@ MFC after: 6 weeks
2010-08-02 21:33:36 +00:00
*
* Reevaluate the following cap on the number of vnodes after the physical
* memory size exceeds 512GB. In the limit, as the physical memory size
kernel: Fix several typos and minor errors - duplicate words - typos - references to old versions of FreeBSD Reviewed by: imp, benno
2017-12-27 03:23:21 +00:00
* grows, the ratio of the memory size in KB to vnodes approaches 64:1.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
s/MAX_SAFE_MAXVNODES/MAXVNODES_MAX/g
2004-08-16 08:33:37 +00:00
#ifndef MAXVNODES_MAX
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
#define MAXVNODES_MAX (512 * 1024 * 1024 / 64) /* 8M */
s/MAX_SAFE_MAXVNODES/MAXVNODES_MAX/g
2004-08-16 08:33:37 +00:00
#endif
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
/*
* Initialize a vnode as it first enters the zone.
*/
static int
vnode_init(void *mem, int size, int flags)
{
struct vnode *vp;
vp = mem;
bzero(vp, size);
/*
* Setup locks.
*/
vp->v_vnlock = &vp->v_lock;
mtx_init(&vp->v_interlock, "vnode interlock", NULL, MTX_DEF);
/*
* By default, don't allow shared locks unless filesystems opt-in.
*/
lockinit(vp->v_vnlock, PVFS, "vnode", VLKTIMEOUT,
LK_NOSHARE | LK_IS_VNODE);
/*
* Initialize bufobj.
*/
Further parallelize the buffer cache. Provide multiple clean queues partitioned into 'domains'. Each domain manages its own bufspace and has its own bufspace daemon. Each domain has a set of subqueues indexed by the current cpuid to reduce lock contention on the cleanq. Refine the sleep/wakeup around the bufspace daemon to use atomics as much as possible. Add a B_REUSE flag that is used to requeue bufs during the scan to approximate LRU rather than locking the queue on every use of a frequently accessed buf. Implement bufspace_reserve with only atomic_fetchadd to avoid loop restarts. Reviewed by: markj Tested by: pho Sponsored by: Netflix, Dell/EMC Isilon Differential Revision: https://reviews.freebsd.org/D14274
2018-02-20 00:06:07 +00:00
bufobj_init(&vp->v_bufobj, vp);
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
/*
* Initialize namecache.
*/
LIST_INIT(&vp->v_cache_src);
TAILQ_INIT(&vp->v_cache_dst);
/*
* Initialize rangelocks.
*/
rangelock_init(&vp->v_rl);
return (0);
}
/*
* Free a vnode when it is cleared from the zone.
*/
static void
vnode_fini(void *mem, int size)
{
struct vnode *vp;
struct bufobj *bo;
vp = mem;
rangelock_destroy(&vp->v_rl);
lockdestroy(vp->v_vnlock);
mtx_destroy(&vp->v_interlock);
bo = &vp->v_bufobj;
rw_destroy(BO_LOCKPTR(bo));
}
Provide more correct sizing of the KVA consumed by a vnode, used by the virtvnodes calculation. Include the size of fs-specific v_data as the nfs nclnode inline, the NFS nclnode is bigger than either ZFS znode or UFS inode. Include the size of namecache_ts and short cache path element, multiplied by the name cache population factor, again inline. Inline defines are used to avoid pollution of the vnode.h with the subsystem-private objects. Non-significant unsynchronized changes of the definitions are fine, we do not care about that precision, and e.g. ZFS consumes much malloced memory per vnode for reasons unaccounted in the formula. Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10. The measures reduce vnode cache pressure on kmem and bring the vnode cache memory use below some apparent thresholds that were exceeded by r291244 due to more robust vnode reuse. Reported and tested by: marius (i386, previous version) Reviewed by: bde Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2016-02-24 15:15:46 +00:00
/*
* Provide the size of NFS nclnode and NFS fh for calculation of the
* vnode memory consumption. The size is specified directly to
* eliminate dependency on NFS-private header.
*
* Other filesystems may use bigger or smaller (like UFS and ZFS)
* private inode data, but the NFS-based estimation is ample enough.
* Still, we care about differences in the size between 64- and 32-bit
* platforms.
*
* Namecache structure size is heuristically
* sizeof(struct namecache_ts) + CACHE_PATH_CUTOFF + 1.
*/
#ifdef _LP64
#define NFS_NCLNODE_SZ (528 + 64)
#define NC_SZ 148
#else
#define NFS_NCLNODE_SZ (360 + 32)
#define NC_SZ 92
#endif
Untangle vfsinit() a bit. Use seperate sysinit functions rather than having a super-function calling bits all over the place.
2000-12-06 07:09:08 +00:00
static void
vntblinit(void *dummy __unused)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
diff --git a/sys/kern/vfs_subr.c b/sys/kern/vfs_subr.c index 7c243b6..0bdaf36 100644 --- a/sys/kern/vfs_subr.c +++ b/sys/kern/vfs_subr.c @@ -279,6 +279,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, #define VSHOULDFREE(vp) (!((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDBUSY(vp) (((vp)->v_iflag & VI_FREE) && (vp)->v_holdcnt) +static int vnsz2log; /* * Initialize the vnode management data structures. @@ -293,6 +294,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, static void vntblinit(void *dummy __unused) { + u_int i; int physvnodes, virtvnodes; /* @@ -332,6 +334,9 @@ vntblinit(void *dummy __unused) syncer_maxdelay = syncer_mask + 1; mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF); cv_init(&sync_wakeup, "syncer"); + for (i = 1; i <= sizeof(struct vnode); i <<= 1) + vnsz2log++; + vnsz2log--; } SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL); @@ -1067,6 +1072,14 @@ alloc: } rangelock_init(&vp->v_rl); + /* + * For the filesystems which do not use vfs_hash_insert(), + * still initialize v_hash to have vfs_hash_index() useful. + * E.g., nullfs uses vfs_hash_index() on the lower vnode for + * its own hashing. + */ + vp->v_hash = (uintptr_t)vp >> vnsz2log; + *vpp = vp; return (0); }
2013-01-14 05:42:54 +00:00
u_int i;
Update the "desiredvnodes" calculation. In particular, make the part of the calculation that is based on the kernel's heap size more conservative. Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the time being set MAXVNODES_MAX to a large value. Reviewed by: jhb@ MFC after: 6 weeks
2010-08-02 21:33:36 +00:00
int physvnodes, virtvnodes;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Make the maximum number of vnodes a function of both the physical memory size and the kernel's heap size, specifically, vm_kmem_size. This function allows a maximum of 40% of the vm_kmem_size to be used for vnodes and vm objects. This is a conservative bound based upon recent problem reports. (In other words, a slight increase in this percentage may be safe.) Finally, machines with less than ~3GB of RAM should be unaffected by this change, i.e., the maximum number of vnodes should remain the same. If necessary, machines with 3GB or more of RAM can increase the maximum number of vnodes by increasing vm_kmem_size. Desired by: scottl Tested by: jake Approved by: re (rwatson,scottl)
2003-05-23 19:54:02 +00:00
/*
Update the "desiredvnodes" calculation. In particular, make the part of the calculation that is based on the kernel's heap size more conservative. Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the time being set MAXVNODES_MAX to a large value. Reviewed by: jhb@ MFC after: 6 weeks
2010-08-02 21:33:36 +00:00
* Desiredvnodes is a function of the physical memory size and the
* kernel's heap size. Generally speaking, it scales with the
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* physical memory size. The ratio of desiredvnodes to the physical
* memory size is 1:16 until desiredvnodes exceeds 98,304.
* Thereafter, the
* marginal ratio of desiredvnodes to the physical memory size is
* 1:64. However, desiredvnodes is limited by the kernel's heap
Update the "desiredvnodes" calculation. In particular, make the part of the calculation that is based on the kernel's heap size more conservative. Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the time being set MAXVNODES_MAX to a large value. Reviewed by: jhb@ MFC after: 6 weeks
2010-08-02 21:33:36 +00:00
* size. The memory required by desiredvnodes vnodes and vm objects
Provide more correct sizing of the KVA consumed by a vnode, used by the virtvnodes calculation. Include the size of fs-specific v_data as the nfs nclnode inline, the NFS nclnode is bigger than either ZFS znode or UFS inode. Include the size of namecache_ts and short cache path element, multiplied by the name cache population factor, again inline. Inline defines are used to avoid pollution of the vnode.h with the subsystem-private objects. Non-significant unsynchronized changes of the definitions are fine, we do not care about that precision, and e.g. ZFS consumes much malloced memory per vnode for reasons unaccounted in the formula. Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10. The measures reduce vnode cache pressure on kmem and bring the vnode cache memory use below some apparent thresholds that were exceeded by r291244 due to more robust vnode reuse. Reported and tested by: marius (i386, previous version) Reviewed by: bde Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2016-02-24 15:15:46 +00:00
* must not exceed 1/10th of the kernel's heap size.
Make the maximum number of vnodes a function of both the physical memory size and the kernel's heap size, specifically, vm_kmem_size. This function allows a maximum of 40% of the vm_kmem_size to be used for vnodes and vm objects. This is a conservative bound based upon recent problem reports. (In other words, a slight increase in this percentage may be safe.) Finally, machines with less than ~3GB of RAM should be unaffected by this change, i.e., the maximum number of vnodes should remain the same. If necessary, machines with 3GB or more of RAM can increase the maximum number of vnodes by increasing vm_kmem_size. Desired by: scottl Tested by: jake Approved by: re (rwatson,scottl)
2003-05-23 19:54:02 +00:00
*/
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
physvnodes = maxproc + pgtok(vm_cnt.v_page_count) / 64 +
3 * min(98304 * 16, pgtok(vm_cnt.v_page_count)) / 64;
Provide more correct sizing of the KVA consumed by a vnode, used by the virtvnodes calculation. Include the size of fs-specific v_data as the nfs nclnode inline, the NFS nclnode is bigger than either ZFS znode or UFS inode. Include the size of namecache_ts and short cache path element, multiplied by the name cache population factor, again inline. Inline defines are used to avoid pollution of the vnode.h with the subsystem-private objects. Non-significant unsynchronized changes of the definitions are fine, we do not care about that precision, and e.g. ZFS consumes much malloced memory per vnode for reasons unaccounted in the formula. Lower the partition of kmem dedicated to vnodes, from 1/7 to 1/10. The measures reduce vnode cache pressure on kmem and bring the vnode cache memory use below some apparent thresholds that were exceeded by r291244 due to more robust vnode reuse. Reported and tested by: marius (i386, previous version) Reviewed by: bde Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2016-02-24 15:15:46 +00:00
virtvnodes = vm_kmem_size / (10 * (sizeof(struct vm_object) +
sizeof(struct vnode) + NC_SZ * ncsizefactor + NFS_NCLNODE_SZ));
Update the "desiredvnodes" calculation. In particular, make the part of the calculation that is based on the kernel's heap size more conservative. Hopefully, this will eliminate the need for MAXVNODES_MAX, but for the time being set MAXVNODES_MAX to a large value. Reviewed by: jhb@ MFC after: 6 weeks
2010-08-02 21:33:36 +00:00
desiredvnodes = min(physvnodes, virtvnodes);
s/MAX_SAFE_MAXVNODES/MAXVNODES_MAX/g
2004-08-16 08:33:37 +00:00
if (desiredvnodes > MAXVNODES_MAX) {
Put a cap on the auto-tuning of kern.maxvnodes. Cap value chosen by: scottl
2004-08-02 21:52:43 +00:00
if (bootverbose)
printf("Reducing kern.maxvnodes %d -> %d\n",
s/MAX_SAFE_MAXVNODES/MAXVNODES_MAX/g
2004-08-16 08:33:37 +00:00
desiredvnodes, MAXVNODES_MAX);
desiredvnodes = MAXVNODES_MAX;
Put a cap on the auto-tuning of kern.maxvnodes. Cap value chosen by: scottl
2004-08-02 21:52:43 +00:00
}
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
wantfreevnodes = desiredvnodes / 4;
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&mntid_mtx, "mntid", NULL, MTX_DEF);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
TAILQ_INIT(&vnode_free_list);
Change callers of mtx_init() to pass in an appropriate lock type name. In most cases NULL is passed, but in some cases such as network driver locks (which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used. Tested on: i386, alpha, sparc64
2002-04-04 21:03:38 +00:00
mtx_init(&vnode_free_list_mtx, "vnode_free_list", NULL, MTX_DEF);
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
vnode_zone = uma_zcreate("VNODE", sizeof (struct vnode), NULL, NULL,
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vnode_init, vnode_fini, UMA_ALIGN_PTR, 0);
Remove references to vm_zone.h and switch over to the new uma API. Also, remove maxsockets. If you look carefully you'll notice that the old zone allocator never honored this anyway.
2002-03-20 04:09:59 +00:00
vnodepoll_zone = uma_zcreate("VNODEPOLL", sizeof (struct vpollinfo),
Allow the vnode zone to return the unused memory. The vnode reference count is/shall be properly maintained for the long time, and VFS shall be safe against the vnode memory reclamation. Proposed by: jeff Tested by: pho
2008-04-24 09:58:33 +00:00
NULL, NULL, NULL, NULL, UMA_ALIGN_PTR, 0);
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
/*
* Preallocate enough nodes to support one-per buf so that
* we can not fail an insert. reassignbuf() callers can not
* tolerate the insertion failure.
*/
buf_trie_zone = uma_zcreate("BUF TRIE", pctrie_node_size(),
NULL, NULL, pctrie_zone_init, NULL, UMA_ALIGN_PTR,
UMA_ZONE_NOFREE | UMA_ZONE_VM);
uma_prealloc(buf_trie_zone, nbuf);
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
vnodes_created = counter_u64_alloc(M_WAITOK);
recycles_count = counter_u64_alloc(M_WAITOK);
free_owe_inact = counter_u64_alloc(M_WAITOK);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Initialize the filesystem syncer.
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
*/
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
syncer_workitem_pending = hashinit(syncer_maxdelay, M_VNODE,
sync_vnode() has some messy code about locking in order to deal with mount fs needing Giant to be held when processing bufobjs. Use a different subqueue for pending workitems on filesystems requiring Giant. This simplifies the code notably and also reduces the number of Giant acquisitions (and the whole processing cost). Suggested by: jeff Reviewed by: kib Tested by: pho
2008-05-04 13:54:55 +00:00
&syncer_mask);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
syncer_maxdelay = syncer_mask + 1;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF);
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
cv_init(&sync_wakeup, "syncer");
diff --git a/sys/kern/vfs_subr.c b/sys/kern/vfs_subr.c index 7c243b6..0bdaf36 100644 --- a/sys/kern/vfs_subr.c +++ b/sys/kern/vfs_subr.c @@ -279,6 +279,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, #define VSHOULDFREE(vp) (!((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDBUSY(vp) (((vp)->v_iflag & VI_FREE) && (vp)->v_holdcnt) +static int vnsz2log; /* * Initialize the vnode management data structures. @@ -293,6 +294,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, static void vntblinit(void *dummy __unused) { + u_int i; int physvnodes, virtvnodes; /* @@ -332,6 +334,9 @@ vntblinit(void *dummy __unused) syncer_maxdelay = syncer_mask + 1; mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF); cv_init(&sync_wakeup, "syncer"); + for (i = 1; i <= sizeof(struct vnode); i <<= 1) + vnsz2log++; + vnsz2log--; } SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL); @@ -1067,6 +1072,14 @@ alloc: } rangelock_init(&vp->v_rl); + /* + * For the filesystems which do not use vfs_hash_insert(), + * still initialize v_hash to have vfs_hash_index() useful. + * E.g., nullfs uses vfs_hash_index() on the lower vnode for + * its own hashing. + */ + vp->v_hash = (uintptr_t)vp >> vnsz2log; + *vpp = vp; return (0); }
2013-01-14 05:42:54 +00:00
for (i = 1; i <= sizeof(struct vnode); i <<= 1)
vnsz2log++;
vnsz2log--;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
In keeping with style(9)'s recommendations on macros, use a ';' after each SYSINIT() macro invocation. This makes a number of lightweight C parsers much happier with the FreeBSD kernel source, including cflow's prcc and lxr. MFC after: 1 month Discussed with: imp, rink
2008-03-16 10:58:09 +00:00
SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL);
Untangle vfsinit() a bit. Use seperate sysinit functions rather than having a super-function calling bits all over the place.
2000-12-06 07:09:08 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Mark a mount point as busy. Used to synchronize access and to delay
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
* unmounting. Eventually, mountlist_mtx is not released on failure.
Move parts of the commit log for r166167, where Tor explained the interaction between vnode locks and vfs_busy(), into comment. MFC after: 1 week
2011-10-04 18:45:29 +00:00
*
* vfs_busy() is a custom lock, it can block the caller.
* vfs_busy() only sleeps if the unmount is active on the mount point.
* For a mountpoint mp, vfs_busy-enforced lock is before lock of any
* vnode belonging to mp.
*
* Lookup uses vfs_busy() to traverse mount points.
* root fs var fs
* / vnode lock A / vnode lock (/var) D
* /var vnode lock B /log vnode lock(/var/log) E
* vfs_busy lock C vfs_busy lock F
*
* Within each file system, the lock order is C->A->B and F->D->E.
*
* When traversing across mounts, the system follows that lock order:
*
* C->A->B
* |
* +->F->D->E
*
* The lookup() process for namei("/var") illustrates the process:
* VOP_LOOKUP() obtains B while A is held
* vfs_busy() obtains a shared lock on F while A and B are held
* vput() releases lock on B
* vput() releases lock on A
* VFS_ROOT() obtains lock on D while shared lock on F is held
* vfs_unbusy() releases shared lock on F
* vn_lock() obtains lock on deadfs vnode vp_crossmp instead of A.
* Attempt to lock A (instead of vp_crossmp) while D is held would
* violate the global order, causing deadlocks.
*
* dounmount() locks B while F is drained.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
vfs_busy(struct mount *mp, int flags)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
MPASS((flags & ~MBF_MASK) == 0);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR3(KTR_VFS, "%s: mp %p with flags %d", __func__, mp, flags);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
MNT_ILOCK(mp);
- Grab a mnt ref in vfs_busy() before dropping the interlock. This will prevent the mount point from going away while we're waiting on the lock. The ref does not need to persist once we have the lock because the lock prevents the mount point from being unmounted. MFC After: 1 week
2006-02-22 06:20:12 +00:00
MNT_REF(mp);
Change vfs_busy to wait until an outcome of pending unmount operation is known and to retry or fail accordingly to that outcome. This fixes the problem with namespace traversing programs failing with random ENOENT errors if someone just happened to try to unmount that same filesystem at the same time. Reported by: dhw Reviewed by: kib, attilio Sponsored by: Juniper Networks, Inc.
2009-03-02 20:51:39 +00:00
/*
sys/kern: spelling fixes in comments. No functional change.
2016-04-29 22:15:33 +00:00
* If mount point is currently being unmounted, sleep until the
Change vfs_busy to wait until an outcome of pending unmount operation is known and to retry or fail accordingly to that outcome. This fixes the problem with namespace traversing programs failing with random ENOENT errors if someone just happened to try to unmount that same filesystem at the same time. Reported by: dhw Reviewed by: kib, attilio Sponsored by: Juniper Networks, Inc.
2009-03-02 20:51:39 +00:00
* mount point fate is decided. If thread doing the unmounting fails,
* it will clear MNTK_UNMOUNT flag before waking us up, indicating
* that this mount point has survived the unmount attempt and vfs_busy
* should retry. Otherwise the unmounter thread will set MNTK_REFEXPIRE
* flag in addition to MNTK_UNMOUNT, indicating that mount point is
* about to be really destroyed. vfs_busy needs to release its
* reference on the mount point in this case and return with ENOENT,
* telling the caller that mount mount it tried to busy is no longer
* valid.
*/
while (mp->mnt_kern_flag & MNTK_UNMOUNT) {
1) Fix a deadlock in the VFS: - threadA runs vfs_rel(mp1) - threadB does unmount the mp1 fs, sets MNTK_UNMOUNT and drop MNT_ILOCK() - threadA runs vfs_busy(mp1) and, as long as, MNTK_UNMOUNT is set, sleeps waiting for threadB to complete the unmount - threadB, in vfs_mount_destroy(), finds mnt_lock > 0 and sleeps waiting for the refcount to expire. Fix the deadlock by adding a flag called MNTK_REFEXPIRE which signals the unmounter is waiting for mnt_ref to expire. The vfs_busy contenders got awake, fails, and if they retry the MNTK_REFEXPIRE won't allow them to sleep again. 2) Simplify significantly the code of vfs_mount_destroy() trimming unnecessary codes: - as long as any reference exited, it is no-more possible to have write-op (primarty and secondary) in progress. - it is no needed to drop and reacquire the mount lock. - filling the structures with dummy values is unuseful as long as it is going to be freed. Tested by: pho, Andrea Barberio <insomniac at slackware dot it> Discussed with: kib
2008-12-16 23:16:10 +00:00
if (flags & MBF_NOWAIT || mp->mnt_kern_flag & MNTK_REFEXPIRE) {
- Grab a mnt ref in vfs_busy() before dropping the interlock. This will prevent the mount point from going away while we're waiting on the lock. The ref does not need to persist once we have the lock because the lock prevents the mount point from being unmounted. MFC After: 1 week
2006-02-22 06:20:12 +00:00
MNT_REL(mp);
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
MNT_IUNLOCK(mp);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR1(KTR_VFS, "%s: failed busying before sleeping",
__func__);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (ENOENT);
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
}
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
if (flags & MBF_MNTLSTLOCK)
mtx_unlock(&mountlist_mtx);
Reviewed by: various. Ever since I first say the way the mount flags were used I've hated the fact that modes, and events, internal and exported, and short-term and long term flags are all thrown together. Finally it's annoyed me enough.. This patch to the entire FreeBSD tree adds a second mount flag word to the mount struct. it is not exported to userspace. I have moved some of the non exported flags over to this word. this means that we now have 8 free bits in the mount flags. There are another two that might well move over, but which I'm not sure about. The only user visible change would have been in pstat -v, except that davidg has disabled it anyhow. I'd still like to move the state flags and the 'command' flags apart from each other.. e.g. MNT_FORCE really doesn't have the same semantics as MNT_RDONLY, but that's left for another day.
1997-11-12 05:42:33 +00:00
mp->mnt_kern_flag |= MNTK_MWAIT;
Fix a LOR in vfs_busy() where, after msleeping, it would lock the mutexes in the wrong order for the case where the MBF_MNTLSTLOCK is set. I believe this did have the potential for deadlock. For example, if multiple nfsd threads called vfs_busyfs(), which calls vfs_busy() with MBF_MNTLSTLOCK. Thanks go to pho for catching this during his testing. Tested by: pho Submitted by: kib MFC after: 2 weeks
2011-04-23 11:22:48 +00:00
msleep(mp, MNT_MTX(mp), PVFS | PDROP, "vfs_busy", 0);
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
if (flags & MBF_MNTLSTLOCK)
mtx_lock(&mountlist_mtx);
Fix a LOR in vfs_busy() where, after msleeping, it would lock the mutexes in the wrong order for the case where the MBF_MNTLSTLOCK is set. I believe this did have the potential for deadlock. For example, if multiple nfsd threads called vfs_busyfs(), which calls vfs_busy() with MBF_MNTLSTLOCK. Thanks go to pho for catching this during his testing. Tested by: pho Submitted by: kib MFC after: 2 weeks
2011-04-23 11:22:48 +00:00
MNT_ILOCK(mp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
if (flags & MBF_MNTLSTLOCK)
mtx_unlock(&mountlist_mtx);
mp->mnt_lockref++;
MNT_IUNLOCK(mp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* Free a busy filesystem.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
void
Decontextualize vfs_busy(), vfs_unbusy() and vfs_mount_alloc() functions. Manpages are updated accordingly. Tested by: Diego Sardina <siarodx at gmail dot com>
2008-08-31 14:26:08 +00:00
vfs_unbusy(struct mount *mp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: mp %p", __func__, mp);
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
MNT_ILOCK(mp);
MNT_REL(mp);
Add KASSERTs to make it easier to debug problems like the one fixed in r188141. Reviewed by: kib,attilio Approved by: rwatson (mentor) Tested by: pho Sponsored by: FreeBSD Foundation
2009-02-06 18:16:01 +00:00
KASSERT(mp->mnt_lockref > 0, ("negative mnt_lockref"));
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
mp->mnt_lockref--;
if (mp->mnt_lockref == 0 && (mp->mnt_kern_flag & MNTK_DRAINING) != 0) {
MPASS(mp->mnt_kern_flag & MNTK_UNMOUNT);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR1(KTR_VFS, "%s: waking up waiters", __func__);
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
mp->mnt_kern_flag &= ~MNTK_DRAINING;
wakeup(&mp->mnt_lockref);
}
MNT_IUNLOCK(mp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Lookup a mount point by filesystem identifier.
*/
struct mount *
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vfs_getvfs(fsid_t *fsid)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Remove register keyword
2005-01-28 12:39:10 +00:00
struct mount *mp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: fsid %p", __func__, fsid);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
struct mountlist and struct mount.mnt_list have no business being a CIRCLEQ. Change them to TAILQ_HEAD and TAILQ_ENTRY respectively. This removes ugly mp != (void*)&mountlist comparisons. Requested by: phk Submitted by: Jake Burkholder jake@checker.org PR: 14967
1999-11-20 10:00:46 +00:00
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) {
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
vfs_ref(mp);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (mp);
Fix some harmless mis-indents. Spotted by: FlexeLint
2002-10-01 15:48:31 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: lookup failed for %p id", __func__, fsid);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
return ((struct mount *) 0);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
/*
* Lookup a mount point by filesystem identifier, busying it before
* returning.
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
*
* To avoid congestion on mountlist_mtx, implement simple direct-mapped
* cache for popular filesystem identifiers. The cache is lockess, using
* the fact that struct mount's are never freed. In worst case we may
* get pointer to unmounted or even different filesystem, so we have to
* check what we got, and go slow way if so.
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
*/
struct mount *
vfs_busyfs(fsid_t *fsid)
{
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
#define FSID_CACHE_SIZE 256
typedef struct mount * volatile vmp_t;
static vmp_t cache[FSID_CACHE_SIZE];
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
struct mount *mp;
int error;
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
uint32_t hash;
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: fsid %p", __func__, fsid);
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
hash = fsid->val[0] ^ fsid->val[1];
hash = (hash >> 16 ^ hash) & (FSID_CACHE_SIZE - 1);
mp = cache[hash];
if (mp == NULL ||
mp->mnt_stat.f_fsid.val[0] != fsid->val[0] ||
mp->mnt_stat.f_fsid.val[1] != fsid->val[1])
goto slow;
if (vfs_busy(mp, 0) != 0) {
cache[hash] = NULL;
goto slow;
}
if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
mp->mnt_stat.f_fsid.val[1] == fsid->val[1])
return (mp);
else
vfs_unbusy(mp);
slow:
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
mtx_lock(&mountlist_mtx);
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
if (mp->mnt_stat.f_fsid.val[0] == fsid->val[0] &&
mp->mnt_stat.f_fsid.val[1] == fsid->val[1]) {
error = vfs_busy(mp, MBF_MNTLSTLOCK);
if (error) {
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
cache[hash] = NULL;
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
mtx_unlock(&mountlist_mtx);
return (NULL);
}
Implement simple direct-mapped cache for popular filesystem identifiers to avoid congestion on global mountlist_mtx mutex in vfs_busyfs(), while traversing through the list of mount points. This change significantly improves NFS server scalability, since it had to do this translation for every request, and the global lock becomes quite congested. This code is more optimized for relatively small number of mount points. On systems with hundreds of active mount points this simple cache may have many collisions. But the original traversal code in that case should also behave much worse, so we are not loosing much. Reviewed by: attilio MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-12 12:43:48 +00:00
cache[hash] = mp;
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
return (mp);
}
}
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: lookup failed for %p id", __func__, fsid);
In the nfsrv_fhtovp(), after the vfs_getvfs() function found the pointer to the fs, but before a vnode on the fs is locked, unmount may free fs structures, causing access to destroyed data and freed memory. Introduce a vfs_busymp() function that looks up and busies found fs while mountlist_mtx is held. Use it in nfsrv_fhtovp() and in the implementation of the handle syscalls. Two other uses of the vfs_getvfs() in the vfs_subr.c, namely in sysctl_vfs_ctl and vfs_getnewfsid seems to be ok. In particular, sysctl_vfs_ctl is protected by Giant by being a non-sleeping sysctl handler, that prevents Giant-locked unmount code to interfere with it. Noted by: tegge Reviewed by: dfr Tested by: pho MFC after: 1 month
2008-11-29 13:34:59 +00:00
mtx_unlock(&mountlist_mtx);
return ((struct mount *) 0);
}
Introduce vfs_suser(), used to test if a user should have special privs for a mount.
2004-07-06 09:37:43 +00:00
/*
Correct typos.
2007-04-10 15:22:40 +00:00
* Check if a user can access privileged mount options.
Introduce vfs_suser(), used to test if a user should have special privs for a mount.
2004-07-06 09:37:43 +00:00
*/
int
vfs_suser(struct mount *mp, struct thread *td)
{
int error;
Make it easier for filesystems to count themselves as jail-enabled, by doing most of the work in a new function prison_add_vfs in kern_jail.c Now a jail-enabled filesystem need only mark itself with VFCF_JAIL, and the rest is taken care of. This includes adding a jail parameter like allow.mount.foofs, and a sysctl like security.jail.mount_foofs_allowed. Both of these used to be a static list of known filesystems, with predefined permission bits. Reviewed by: kib Differential Revision: D14681
2018-05-04 20:54:27 +00:00
if (jailed(td->td_ucred)) {
/*
* If the jail of the calling thread lacks permission for
* this type of file system, deny immediately.
*/
if (!prison_allow(td->td_ucred, mp->mnt_vfc->vfc_prison_flag))
return (EPERM);
/*
* If the file system was mounted outside the jail of the
* calling thread, deny immediately.
*/
if (prison_check(td->td_ucred, mp->mnt_cred) != 0)
return (EPERM);
}
Fix jails and jail-friendly file systems handling: - We need to allow for PRIV_VFS_MOUNT_OWNER inside a jail. - Move security checks to vfs_suser() and deny unmounting and updating for jailed root from different jails, etc. OK'ed by: rwatson
2007-04-13 23:54:22 +00:00
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes. This bring huge amount of changes, I'll enumerate only user-visible changes: - Delegated Administration Allows regular users to perform ZFS operations, like file system creation, snapshot creation, etc. - L2ARC Level 2 cache for ZFS - allows to use additional disks for cache. Huge performance improvements mostly for random read of mostly static content. - slog Allow to use additional disks for ZFS Intent Log to speed up operations like fsync(2). - vfs.zfs.super_owner Allows regular users to perform privileged operations on files stored on ZFS file systems owned by him. Very careful with this one. - chflags(2) Not all the flags are supported. This still needs work. - ZFSBoot Support to boot off of ZFS pool. Not finished, AFAIK. Submitted by: dfr - Snapshot properties - New failure modes Before if write requested failed, system paniced. Now one can select from one of three failure modes: - panic - panic on write error - wait - wait for disk to reappear - continue - serve read requests if possible, block write requests - Refquota, refreservation properties Just quota and reservation properties, but don't count space consumed by children file systems, clones and snapshots. - Sparse volumes ZVOLs that don't reserve space in the pool. - External attributes Compatible with extattr(2). - NFSv4-ACLs Not sure about the status, might not be complete yet. Submitted by: trasz - Creation-time properties - Regression tests for zpool(8) command. Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
/*
* If file system supports delegated administration, we don't check
* for the PRIV_VFS_MOUNT_OWNER privilege - it will be better verified
* by the file system itself.
* If this is not the user that did original mount, we check for
* the PRIV_VFS_MOUNT_OWNER privilege.
*/
if (!(mp->mnt_vfc->vfc_flags & VFCF_DELEGADMIN) &&
Introduce vfs_suser(), used to test if a user should have special privs for a mount.
2004-07-06 09:37:43 +00:00
mp->mnt_cred->cr_uid != td->td_ucred->cr_uid) {
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
if ((error = priv_check(td, PRIV_VFS_MOUNT_OWNER)) != 0)
Introduce vfs_suser(), used to test if a user should have special privs for a mount.
2004-07-06 09:37:43 +00:00
return (error);
}
return (0);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
* Get a new unique fsid. Try to make its val[0] unique, since this value
* will be used to create fake device numbers for stat(). Also try (but
* not so hard) make its val[0] unique mod 2^16, since some emulators only
* support 16-bit device numbers. We end up with unique val[0]'s for the
* first 2^16 calls and unique val[0]'s mod 2^16 for the first 2^8 calls.
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
*
Try harder to make the lower 16 bits of fsids unique. The vfs type number was packed very wastefully, giving perfect non-uniqeness in the lower 16 bits of fsids for filesystems with the same vfs type. This made linux_stat() return perfectly non-unique (broken) 16-bit st_dev's for nfs mount points, and effectively reduced mntid_base to 8 bits so that the vfs_getnewfsid() looped endlessly when there are already 256 mounted filesystems with the required vfs type. Approved by: jkh
2000-03-12 14:23:21 +00:00
* Keep in mind that several mounts may be running in parallel. Starting
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
* the search one past where the previous search terminated is both a
* micro-optimization and a defense against returning the same fsid to
* different mounts.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vfs_getnewfsid(struct mount *mp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Use ISO C99 integer types in sys/kern where possible. There are only about 100 occurences of the BSD-specific u_int*_t datatypes in sys/kern. The ISO C99 integer types are used here more often.
2010-06-21 09:55:56 +00:00
static uint16_t mntid_base;
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
struct mount *nmp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
fsid_t tfsid;
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
int mtype;
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: mp %p", __func__, mp);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mntid_mtx);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
mtype = mp->mnt_vfc->vfc_typenum;
Try harder to make the lower 16 bits of fsids unique. The vfs type number was packed very wastefully, giving perfect non-uniqeness in the lower 16 bits of fsids for filesystems with the same vfs type. This made linux_stat() return perfectly non-unique (broken) 16-bit st_dev's for nfs mount points, and effectively reduced mntid_base to 8 bits so that the vfs_getnewfsid() looped endlessly when there are already 256 mounted filesystems with the required vfs type. Approved by: jkh
2000-03-12 14:23:21 +00:00
tfsid.val[1] = mtype;
Fix support for more than 256 simultaneous mounts. Theoretical limit is 2^16 mounts per fs type. Reported by: Troy Arie Cobb <tcobb@staff.circle.net> via phk Reviewed by: bde
2000-07-07 14:01:08 +00:00
mtype = (mtype & 0xFF) << 24;
Don't try so hard to make the lower 16 bits of fsids unique. It tended to recycle full fsids after only 16 mount/unmount's. This is probably too often for exported fsids. Now we recycle the full fsids only after 2^16 mount/ umount's and only ensure uniqueness in the lower 16 bits if there have been <= 256 calls to vfs_getnewfsid() since the system started.
2000-03-14 14:19:49 +00:00
for (;;) {
Second half of the dev_t cleanup. The big lines are: NODEV -> NULL NOUDEV -> NODEV udev_t -> dev_t udev2dev() -> findcdev() Various minor adjustments including handling of userland access to kernel space struct cdev etc.
2004-06-17 17:16:53 +00:00
tfsid.val[0] = makedev(255,
Fix support for more than 256 simultaneous mounts. Theoretical limit is 2^16 mounts per fs type. Reported by: Troy Arie Cobb <tcobb@staff.circle.net> via phk Reviewed by: bde
2000-07-07 14:01:08 +00:00
mtype | ((mntid_base & 0xFF00) << 8) | (mntid_base & 0xFF));
mntid_base++;
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
if ((nmp = vfs_getvfs(&tfsid)) == NULL)
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
break;
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
vfs_rel(nmp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
mp->mnt_stat.f_fsid.val[0] = tfsid.val[0];
Fix BOOTP root FS mounts. Also cleanup vfs_getnewfsid() and collapse addaliasu() into addalias() (no operational change) and clarify comments relating to a trick that vclean() uses. The fix to BOOTP is yet another hack. Actually, rootfsid handling is already a major hack. The whole thing needs to be cleaned up. Reviewed by: David Greenman <dg@root.com>, Alan Cox <alc@cs.rice.edu>
1999-09-19 06:24:21 +00:00
mp->mnt_stat.f_fsid.val[1] = tfsid.val[1];
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mntid_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Support full-precision file timestamps. Until now, only the seconds have been maintained, and that is still the default. A new sysctl variable "vfs.timestamp_precision" can be used to enable higher levels of precision: 0 = seconds only; nanoseconds zeroed (default). 1 = seconds and nanoseconds, accurate within 1/HZ. 2 = seconds and nanoseconds, truncated to microseconds. >=3 = seconds and nanoseconds, maximum precision. Level 1 uses getnanotime(), which is fast but can be wrong by up to 1/HZ. Level 2 uses microtime(). It might be desirable for consistency with utimes() and friends, which take timeval structures rather than timespecs. Level 3 uses nanotime() for the higest precision. I benchmarked levels 0, 1, and 3 by copying a 550 MB tree with "cpio -pdu". There was almost negligible difference in the system times -- much less than 1%, and less than the variation among multiple runs at the same level. Bruce Evans dreamed up a torture test involving 1-byte reads with intervening fstat() calls, but the cpio test seems more realistic to me. This feature is currently implemented only for the UFS (FFS and MFS) filesystems. But I think it should be easy to support it in the others as well. An earlier version of this was reviewed by Bruce. He's not to blame for any breakage I've introduced since then. Reviewed by: bde (an earlier version of the code)
1999-08-22 00:15:16 +00:00
/*
* Knob to control the precision of file timestamps:
*
* 0 = seconds only; nanoseconds zeroed.
* 1 = seconds and nanoseconds, accurate within 1/HZ.
* 2 = seconds and nanoseconds, truncated to microseconds.
* >=3 = seconds and nanoseconds, maximum precision.
*/
enum { TSP_SEC, TSP_HZ, TSP_USEC, TSP_NSEC };
Change the default VFS timestamp precision from seconds to microseconds. Discussed on: arch@ MFC after: 2 weeks
2015-01-25 19:56:45 +00:00
static int timestamp_precision = TSP_USEC;
Support full-precision file timestamps. Until now, only the seconds have been maintained, and that is still the default. A new sysctl variable "vfs.timestamp_precision" can be used to enable higher levels of precision: 0 = seconds only; nanoseconds zeroed (default). 1 = seconds and nanoseconds, accurate within 1/HZ. 2 = seconds and nanoseconds, truncated to microseconds. >=3 = seconds and nanoseconds, maximum precision. Level 1 uses getnanotime(), which is fast but can be wrong by up to 1/HZ. Level 2 uses microtime(). It might be desirable for consistency with utimes() and friends, which take timeval structures rather than timespecs. Level 3 uses nanotime() for the higest precision. I benchmarked levels 0, 1, and 3 by copying a 550 MB tree with "cpio -pdu". There was almost negligible difference in the system times -- much less than 1%, and less than the variation among multiple runs at the same level. Bruce Evans dreamed up a torture test involving 1-byte reads with intervening fstat() calls, but the cpio test seems more realistic to me. This feature is currently implemented only for the UFS (FFS and MFS) filesystems. But I think it should be easy to support it in the others as well. An earlier version of this was reviewed by Bruce. He's not to blame for any breakage I've introduced since then. Reviewed by: bde (an earlier version of the code)
1999-08-22 00:15:16 +00:00
SYSCTL_INT(_vfs, OID_AUTO, timestamp_precision, CTLFLAG_RW,
Fix style(9) issues from r215281 and r215282. MFC after: 1 week
2010-11-14 08:06:29 +00:00
&timestamp_precision, 0, "File timestamp precision (0: seconds, "
Change 'Hz' back to 'HZ'... it's referring to the kernel config option named HZ, not being used as an abbreviation of the unit of measure.
2017-03-12 18:07:03 +00:00
"1: sec + ns accurate to 1/HZ, 2: sec + ns truncated to us, "
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
"3+: sec + ns (max. precision))");
Support full-precision file timestamps. Until now, only the seconds have been maintained, and that is still the default. A new sysctl variable "vfs.timestamp_precision" can be used to enable higher levels of precision: 0 = seconds only; nanoseconds zeroed (default). 1 = seconds and nanoseconds, accurate within 1/HZ. 2 = seconds and nanoseconds, truncated to microseconds. >=3 = seconds and nanoseconds, maximum precision. Level 1 uses getnanotime(), which is fast but can be wrong by up to 1/HZ. Level 2 uses microtime(). It might be desirable for consistency with utimes() and friends, which take timeval structures rather than timespecs. Level 3 uses nanotime() for the higest precision. I benchmarked levels 0, 1, and 3 by copying a 550 MB tree with "cpio -pdu". There was almost negligible difference in the system times -- much less than 1%, and less than the variation among multiple runs at the same level. Bruce Evans dreamed up a torture test involving 1-byte reads with intervening fstat() calls, but the cpio test seems more realistic to me. This feature is currently implemented only for the UFS (FFS and MFS) filesystems. But I think it should be easy to support it in the others as well. An earlier version of this was reviewed by Bruce. He's not to blame for any breakage I've introduced since then. Reviewed by: bde (an earlier version of the code)
1999-08-22 00:15:16 +00:00
/*
* Get a current timestamp.
*/
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vfs_timestamp(struct timespec *tsp)
Support full-precision file timestamps. Until now, only the seconds have been maintained, and that is still the default. A new sysctl variable "vfs.timestamp_precision" can be used to enable higher levels of precision: 0 = seconds only; nanoseconds zeroed (default). 1 = seconds and nanoseconds, accurate within 1/HZ. 2 = seconds and nanoseconds, truncated to microseconds. >=3 = seconds and nanoseconds, maximum precision. Level 1 uses getnanotime(), which is fast but can be wrong by up to 1/HZ. Level 2 uses microtime(). It might be desirable for consistency with utimes() and friends, which take timeval structures rather than timespecs. Level 3 uses nanotime() for the higest precision. I benchmarked levels 0, 1, and 3 by copying a 550 MB tree with "cpio -pdu". There was almost negligible difference in the system times -- much less than 1%, and less than the variation among multiple runs at the same level. Bruce Evans dreamed up a torture test involving 1-byte reads with intervening fstat() calls, but the cpio test seems more realistic to me. This feature is currently implemented only for the UFS (FFS and MFS) filesystems. But I think it should be easy to support it in the others as well. An earlier version of this was reviewed by Bruce. He's not to blame for any breakage I've introduced since then. Reviewed by: bde (an earlier version of the code)
1999-08-22 00:15:16 +00:00
{
struct timeval tv;
switch (timestamp_precision) {
case TSP_SEC:
tsp->tv_sec = time_second;
tsp->tv_nsec = 0;
break;
case TSP_HZ:
getnanotime(tsp);
break;
case TSP_USEC:
microtime(&tv);
TIMEVAL_TO_TIMESPEC(&tv, tsp);
break;
case TSP_NSEC:
default:
nanotime(tsp);
break;
}
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Set vnode attributes to VNOVAL
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vattr_null(struct vattr *vap)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
vap->va_type = VNON;
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
vap->va_size = VNOVAL;
vap->va_bytes = VNOVAL;
Initialise all the fields separately in vattr_null since on the alpha they are not all the same width.
1998-07-12 16:45:39 +00:00
vap->va_mode = VNOVAL;
vap->va_nlink = VNOVAL;
vap->va_uid = VNOVAL;
vap->va_gid = VNOVAL;
vap->va_fsid = VNOVAL;
vap->va_fileid = VNOVAL;
vap->va_blocksize = VNOVAL;
vap->va_rdev = VNOVAL;
vap->va_atime.tv_sec = VNOVAL;
vap->va_atime.tv_nsec = VNOVAL;
vap->va_mtime.tv_sec = VNOVAL;
vap->va_mtime.tv_nsec = VNOVAL;
vap->va_ctime.tv_sec = VNOVAL;
vap->va_ctime.tv_nsec = VNOVAL;
Change utimes to set the file creation time (for filesystems that support creation times such as UFS2) to the value of the modification time if the value of the modification time is older than the current creation time. See utimes(2) for further details. Sponsored by: DARPA & NAI Labs.
2002-07-17 02:03:19 +00:00
vap->va_birthtime.tv_sec = VNOVAL;
vap->va_birthtime.tv_nsec = VNOVAL;
Initialise all the fields separately in vattr_null since on the alpha they are not all the same width.
1998-07-12 16:45:39 +00:00
vap->va_flags = VNOVAL;
vap->va_gen = VNOVAL;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vap->va_vaflags = 0;
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
/*
* This routine is called when we have too many vnodes. It attempts
* to free <count> vnodes and will potentially free vnodes that still
* have VM backing store (VM backing store is typically the cause
* of a vnode blowout so we want to do this). Therefore, this operation
* is not considered cheap.
*
* A number of conditions may prevent a vnode from being reclaimed.
* the buffer cache may have references on the vnode, a directory
* vnode may still have references due to the namei cache representing
* underlying files, or the vnode may be in active use. It is not
sys/kern: spelling fixes in comments. No functional change.
2016-04-29 22:15:33 +00:00
* desirable to reuse such vnodes. These conditions may cause the
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
* number of vnodes to reach some minimum value regardless of what
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
* you set kern.maxvnodes to. Do not set kern.maxvnodes too low.
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
*/
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
static int
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
vlrureclaim(struct mount *mp, int reclaim_nc_src, int trigger)
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
{
struct vnode *vp;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
int count, done, target;
Add vlruvp() routine - implements LRU operation for vnode recycling. We calculate a trigger point that both guarentees we will find a sufficient number of vnodes to recycle and prevents us from recycling vnodes with lots of resident pages. This particular section of code is designed to recycle vnodes, not do unnecessary frees of cached VM pages.
2002-01-10 18:31:53 +00:00
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
done = 0;
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vn_start_write(NULL, &mp, V_WAIT);
Remove mntvnode_mtx and replace it with per-mountpoint mutex. Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to operate on this mutex transparently. Eventually new mutex will be protecting more fields in struct mount, not only vnode list. Discussed with: jeff
2003-11-05 04:30:08 +00:00
MNT_ILOCK(mp);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
count = mp->mnt_nvnodelistsize;
target = count * (int64_t)gapvnodes / imax(desiredvnodes, 1);
target = target / 10 + 1;
while (count != 0 && done < target) {
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
vp = TAILQ_FIRST(&mp->mnt_nvnodelist);
while (vp != NULL && vp->v_type == VMARKER)
vp = TAILQ_NEXT(vp, v_nmntvnodes);
if (vp == NULL)
break;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* XXX LRU is completely broken for non-free vnodes. First
* by calling here in mountpoint order, then by moving
* unselected vnodes to the end here, and most grossly by
* removing the vlruvp() function that was supposed to
* maintain the order. (This function was born broken
* since syncer problems prevented it doing anything.) The
* order is closer to LRC (C = Created).
*
* LRU reclaiming of vnodes seems to have last worked in
* FreeBSD-3 where LRU wasn't mentioned under any spelling.
* Then there was no hold count, and inactive vnodes were
* simply put on the free list in LRU order. The separate
* lists also break LRU. We prefer to reclaim from the
* free list for technical reasons. This tends to thrash
* the free list to keep very unrecently used held vnodes.
* The problem is mitigated by keeping the free list large.
*/
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
--count;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
if (!VI_TRYLOCK(vp))
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
goto next_iter;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
/*
* If it's been deconstructed already, it's still
* referenced, or it exceeds the trigger, skip it.
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* Also skip free vnodes. We are trying to make space
* to expand the free list, not reduce it.
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
*/
Add a knob to allow reclaim of the directory vnodes that are source of the namecache records. The reclamation is not enabled by default because for typical workload it would make namecache unusable, but large nested directory tree easily puts any process that accesses filesystem into 1 second wait for vlru. Reported by: yar (long time ago) MFC after: 3 days
2009-12-28 15:35:39 +00:00
if (vp->v_usecount ||
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
(!reclaim_nc_src && !LIST_EMPTY(&vp->v_cache_src)) ||
((vp->v_iflag & VI_FREE) != 0) ||
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
(vp->v_iflag & VI_DOOMED) != 0 || (vp->v_object != NULL &&
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vp->v_object->resident_page_count > trigger)) {
VI_UNLOCK(vp);
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
goto next_iter;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
}
MNT_IUNLOCK(mp);
vholdl(vp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
if (VOP_LOCK(vp, LK_INTERLOCK|LK_EXCLUSIVE|LK_NOWAIT)) {
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdrop(vp);
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
goto next_iter_mntunlocked;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
}
VI_LOCK(vp);
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
/*
* v_usecount may have been bumped after VOP_LOCK() dropped
* the vnode interlock and before it was locked again.
*
* It is not necessary to recheck VI_DOOMED because it can
* only be set by another thread that holds both the vnode
* lock and vnode interlock. If another thread has the
* vnode lock before we get to VOP_LOCK() and obtains the
* vnode interlock after VOP_LOCK() drops the vnode
* interlock, the other thread will be unable to drop the
* vnode lock before our VOP_LOCK() call fails.
*/
Add a knob to allow reclaim of the directory vnodes that are source of the namecache records. The reclamation is not enabled by default because for typical workload it would make namecache unusable, but large nested directory tree easily puts any process that accesses filesystem into 1 second wait for vlru. Reported by: yar (long time ago) MFC after: 3 days
2009-12-28 15:35:39 +00:00
if (vp->v_usecount ||
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
(!reclaim_nc_src && !LIST_EMPTY(&vp->v_cache_src)) ||
(vp->v_iflag & VI_FREE) != 0 ||
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
(vp->v_object != NULL &&
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
vp->v_object->resident_page_count > trigger)) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, LK_INTERLOCK);
Add missing vdrop() in error case. Submitted by: Fahad (mohd.fahadullah@isilon.com) MFC after: 1 week
2013-05-04 18:38:16 +00:00
vdrop(vp);
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
goto next_iter_mntunlocked;
}
KASSERT((vp->v_iflag & VI_DOOMED) == 0,
("VI_DOOMED unexpectedly detected in vlrureclaim()"));
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
counter_u64_add(recycles_count, 1);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vgonel(vp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdropl(vp);
done++;
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
next_iter_mntunlocked:
Based on discussions on the svn-src mailing list, rework r218195: - entirely eliminate some calls to uio_yeild() as being unnecessary, such as in a sysctl handler. - move should_yield() and maybe_yield() to kern_synch.c and move the prototypes from sys/uio.h to sys/proc.h - add a slightly more generic kern_yield() that can replace the functionality of uio_yield(). - replace source uses of uio_yield() with the functional equivalent, or in some cases do not change the thread priority when switching. - fix a logic inversion bug in vlrureclaim(), pointed out by bde@. - instead of using the per-cpu last switched ticks, use a per thread variable for should_yield(). With PREEMPTION, the only reasonable use of this is to determine if a lock has been held a long time and relinquish it. Without PREEMPTION, this is essentially the same as the per-cpu variable.
2011-02-08 00:16:36 +00:00
if (!should_yield())
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
goto relock_mnt;
goto yield;
next_iter:
Based on discussions on the svn-src mailing list, rework r218195: - entirely eliminate some calls to uio_yeild() as being unnecessary, such as in a sysctl handler. - move should_yield() and maybe_yield() to kern_synch.c and move the prototypes from sys/uio.h to sys/proc.h - add a slightly more generic kern_yield() that can replace the functionality of uio_yield(). - replace source uses of uio_yield() with the functional equivalent, or in some cases do not change the thread priority when switching. - fix a logic inversion bug in vlrureclaim(), pointed out by bde@. - instead of using the per-cpu last switched ticks, use a per thread variable for should_yield(). With PREEMPTION, the only reasonable use of this is to determine if a lock has been held a long time and relinquish it. Without PREEMPTION, this is essentially the same as the per-cpu variable.
2011-02-08 00:16:36 +00:00
if (!should_yield())
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
continue;
MNT_IUNLOCK(mp);
yield:
Fixup r218424: uio_yield() was scaling directly to userland priority. When kern_yield() was introduced with the possibility to specify a new priority, the behaviour changed by not lowering priority at all in the consumers, making the yielding mechanism highly ineffective for high priority kthreads like bufdaemon, syncer, vlrudaemon, etc. There are no evidences that consumers could bear with such change in semantic and this situation could finally lead to bugs similar to the ones fixed in r244240. Re-specify userland pri for kthreads involved. Tested by: pho Reviewed by: kib, mdf MFC after: 1 week
2012-12-21 13:14:12 +00:00
kern_yield(PRI_USER);
Back out the removal of LK_NOWAIT from the VOP_LOCK() call in vlrureclaim() in vfs_subr.c 1.636 because waiting for the vnode lock aggravates an existing race condition. It is also undesirable according to the commit log for 1.631. Fix the tiny race condition that remains by rechecking the vnode state after grabbing the vnode lock and grabbing the vnode interlock. Fix the problem of other threads being starved (which 1.636 attempted to fix by removing LK_NOWAIT) by calling uio_yield() periodically in vlrureclaim(). This should be more deterministic than hoping that VOP_LOCK() without LK_NOWAIT will block, which may not happen in this loop. Reviewed by: kan MFC after: 5 days
2005-08-23 03:44:06 +00:00
relock_mnt:
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
MNT_ILOCK(mp);
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
}
Remove mntvnode_mtx and replace it with per-mountpoint mutex. Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to operate on this mutex transparently. Eventually new mutex will be protecting more fields in struct mount, not only vnode list. Discussed with: jeff
2003-11-05 04:30:08 +00:00
MNT_IUNLOCK(mp);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vn_finished_write(mp);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
return done;
}
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
static int max_vnlru_free = 10000; /* limit on vnode free requests per call */
SYSCTL_INT(_debug, OID_AUTO, max_vnlru_free, CTLFLAG_RW, &max_vnlru_free,
0,
"limit on vnode free requests per call to the vnlru_free routine");
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
/*
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* Attempt to reduce the free list by the requested amount.
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
*/
static void
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
vnlru_free_locked(int count, struct vfsops *mnt_op)
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
{
struct vnode *vp;
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
struct mount *mp;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
bool tried_batches;
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
tried_batches = false;
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
mtx_assert(&vnode_free_list_mtx, MA_OWNED);
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
if (count > max_vnlru_free)
count = max_vnlru_free;
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
for (; count > 0; count--) {
vp = TAILQ_FIRST(&vnode_free_list);
/*
* The list can be modified while the free_list_mtx
* has been dropped and vp could be NULL here.
*/
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
if (vp == NULL) {
if (tried_batches)
break;
mtx_unlock(&vnode_free_list_mtx);
vnlru_return_batches(mnt_op);
tried_batches = true;
mtx_lock(&vnode_free_list_mtx);
continue;
}
- Add KTR_VFS tracing to track the life of vnodes. Eventually KTR_VFS events could be added to cover other interesting details. - Add some VNASSERTs to discover places where we access vnodes after they have been uma_zfree'd before we try to free them again. - Add a few more VNASSERTs to vdestroy() to be certain that the vnode is really unused. Sponsored by: Isilon Systems, Inc.
2005-06-11 01:16:46 +00:00
VNASSERT(vp->v_op != NULL, vp,
("vnlru_free: vnode already reclaimed."));
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
KASSERT((vp->v_iflag & VI_FREE) != 0,
("Removing vnode not on freelist"));
KASSERT((vp->v_iflag & VI_ACTIVE) == 0,
("Mangling active vnode"));
TAILQ_REMOVE(&vnode_free_list, vp, v_actfreelist);
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
/*
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
* Don't recycle if our vnode is from different type
* of mount point. Note that mp is type-safe, the
* check does not reach unmapped address even if
* vnode is reclaimed.
* Don't recycle if we can't get the interlock without
* blocking.
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
*/
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
if ((mnt_op != NULL && (mp = vp->v_mount) != NULL &&
mp->mnt_op != mnt_op) || !VI_TRYLOCK(vp)) {
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
TAILQ_INSERT_TAIL(&vnode_free_list, vp, v_actfreelist);
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
continue;
- In vnlru_free() remove the vnode from the free list before we call vtryrecycle(). We could sometimes get into situations where two threads could try to recycle the same vnode before this. - vtryrecycle() is now responsible for returning the vnode to the free list if it fails and someone else hasn't done it. - Make a new function vfreehead() which moves a vnode to the head of the free list and use it in vgone() to clean up that code a bit. Sponsored by: Isilon Systems, Inc. Reported by: pho, kkenn
2005-04-30 11:22:40 +00:00
}
Remove one-time use macros which check for the vnode lifecycle. More, some parts of the checks are in fact redundand in the surrounding code, and it is more clear what the conditions are by direct testing of the flags. Two of the three macros were only used in assertions. In vnlru_free(), all relevant parts of vholdl() were already inlined, except the increment of v_holdcnt itself. Do not call vholdl() to do the increment as well, this allows to make assertions in vholdl()/vhold() more strict. In v_incr_usecount(), call vholdl() before incrementing other ref counters. The change is no-op, but it makes less surprising to see the vnode state in debugger if interrupted inside v_incr_usecount(). Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-07-29 16:42:34 +00:00
VNASSERT((vp->v_iflag & VI_FREE) != 0 && vp->v_holdcnt == 0,
vp, ("vp inconsistent on freelist"));
/*
* The clear of VI_FREE prevents activation of the
* vnode. There is no sense in putting the vnode on
* the mount point active list, only to remove it
* later during recycling. Inline the relevant part
* of vholdl(), to avoid triggering assertions or
* activating.
*/
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
freevnodes--;
- In vnlru_free() remove the vnode from the free list before we call vtryrecycle(). We could sometimes get into situations where two threads could try to recycle the same vnode before this. - vtryrecycle() is now responsible for returning the vnode to the free list if it fails and someone else hasn't done it. - Make a new function vfreehead() which moves a vnode to the head of the free list and use it in vgone() to clean up that code a bit. Sponsored by: Isilon Systems, Inc. Reported by: pho, kkenn
2005-04-30 11:22:40 +00:00
vp->v_iflag &= ~VI_FREE;
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
refcount_acquire(&vp->v_holdcnt);
Remove one-time use macros which check for the vnode lifecycle. More, some parts of the checks are in fact redundand in the surrounding code, and it is more clear what the conditions are by direct testing of the flags. Two of the three macros were only used in assertions. In vnlru_free(), all relevant parts of vholdl() were already inlined, except the increment of v_holdcnt itself. Do not call vholdl() to do the increment as well, this allows to make assertions in vholdl()/vhold() more strict. In v_incr_usecount(), call vholdl() before incrementing other ref counters. The change is no-op, but it makes less surprising to see the vnode state in debugger if interrupted inside v_incr_usecount(). Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-07-29 16:42:34 +00:00
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
mtx_unlock(&vnode_free_list_mtx);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
VI_UNLOCK(vp);
vtryrecycle(vp);
/*
* If the recycled succeeded this vdrop will actually free
* the vnode. If not it will simply place it back on
* the free list.
*/
vdrop(vp);
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
mtx_lock(&vnode_free_list_mtx);
}
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
void
vnlru_free(int count, struct vfsops *mnt_op)
{
mtx_lock(&vnode_free_list_mtx);
vnlru_free_locked(count, mnt_op);
mtx_unlock(&vnode_free_list_mtx);
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/* XXX some names and initialization are bad for limits and watermarks. */
static int
vspace(void)
{
int space;
gapvnodes = imax(desiredvnodes - wantfreevnodes, 100);
vhiwat = gapvnodes / 11; /* 9% -- just under the 10% in vlrureclaim() */
vlowat = vhiwat / 2;
if (numvnodes > desiredvnodes)
return (0);
space = desiredvnodes - numvnodes;
if (freevnodes > wantfreevnodes)
space += freevnodes - wantfreevnodes;
return (space);
}
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
static void
vnlru_return_batch_locked(struct mount *mp)
{
struct vnode *vp;
mtx_assert(&mp->mnt_listmtx, MA_OWNED);
if (mp->mnt_tmpfreevnodelistsize == 0)
return;
TAILQ_FOREACH(vp, &mp->mnt_tmpfreevnodelist, v_actfreelist) {
VNASSERT((vp->v_mflag & VMP_TMPMNTFREELIST) != 0, vp,
("vnode without VMP_TMPMNTFREELIST on mnt_tmpfreevnodelist"));
vp->v_mflag &= ~VMP_TMPMNTFREELIST;
}
vfs: clear the tmp free list flag before taking the free vnode list lock Safe access is already guaranteed because of the mnt_listmx lock.
2016-10-08 13:36:59 +00:00
mtx_lock(&vnode_free_list_mtx);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
TAILQ_CONCAT(&vnode_free_list, &mp->mnt_tmpfreevnodelist, v_actfreelist);
freevnodes += mp->mnt_tmpfreevnodelistsize;
mtx_unlock(&vnode_free_list_mtx);
vfs: clear the tmp free list flag before taking the free vnode list lock Safe access is already guaranteed because of the mnt_listmx lock.
2016-10-08 13:36:59 +00:00
mp->mnt_tmpfreevnodelistsize = 0;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
}
static void
vnlru_return_batch(struct mount *mp)
{
mtx_lock(&mp->mnt_listmtx);
vnlru_return_batch_locked(mp);
mtx_unlock(&mp->mnt_listmtx);
}
static void
vnlru_return_batches(struct vfsops *mnt_op)
{
struct mount *mp, *nmp;
bool need_unbusy;
mtx_lock(&mountlist_mtx);
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
need_unbusy = false;
if (mnt_op != NULL && mp->mnt_op != mnt_op)
goto next;
if (mp->mnt_tmpfreevnodelistsize == 0)
goto next;
if (vfs_busy(mp, MBF_NOWAIT | MBF_MNTLSTLOCK) == 0) {
vnlru_return_batch(mp);
need_unbusy = true;
mtx_lock(&mountlist_mtx);
}
next:
nmp = TAILQ_NEXT(mp, mnt_list);
if (need_unbusy)
vfs_unbusy(mp);
}
mtx_unlock(&mountlist_mtx);
}
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
/*
* Attempt to recycle vnodes in a context that is always safe to block.
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
* Calling vlrurecycle() from the bowels of filesystem code has some
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
* interesting deadlock problems.
*/
static struct proc *vnlruproc;
static int vnlruproc_sig;
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
static void
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
vnlru_proc(void)
{
struct mount *mp, *nmp;
Do pass removing some write-only variables from the kernel. This reduces noise when kernel is compiled by newer GCC versions, such as one used by external toolchain ports. Reviewed by: kib, andrew(sys/arm and sys/arm64), emaste(partial), erj(partial) Reviewed by: jhb (sys/dev/pci/* sys/kern/vfs_aio.c and sys/kern/kern_synch.c) Differential Revision: https://reviews.freebsd.org/D10385
2017-12-25 04:48:39 +00:00
unsigned long onumvnodes;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
int done, force, reclaim_nc_src, trigger, usevnodes;
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
EVENTHANDLER_REGISTER(shutdown_pre_sync, kproc_shutdown, vnlruproc,
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
SHUTDOWN_PRI_FIRST);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
force = 0;
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
for (;;) {
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
kproc_suspend_check(vnlruproc);
- Extend the vnode_free_list_mtx to cover numvnodes and freevnodes. This was done only some of the time before, and now it is uniformly applied.
2002-08-13 05:29:48 +00:00
mtx_lock(&vnode_free_list_mtx);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* If numvnodes is too large (due to desiredvnodes being
* adjusted using its sysctl, or emergency growth), first
* try to reduce it by discarding from the free list.
*/
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
if (numvnodes > desiredvnodes)
vnlru_free_locked(numvnodes - desiredvnodes, NULL);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* Sleep if the vnode cache is in a good state. This is
* when it is not over-full and has space for about a 4%
* or 9% expansion (by growing its size or inexcessively
* reducing its free list). Otherwise, try to reclaim
* space for a 10% expansion.
*/
if (vstir && force == 0) {
force = 1;
vstir = 0;
}
if (vspace() >= vlowat && force == 0) {
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
vnlruproc_sig = 0;
Vnodes pull in 800-900 bytes these days, all things counted, so we need to treat desiredvnodes much more like a limit than as a vague concept. On a 2GB RAM machine where desired vnodes is 130k, we run out of kmem_map space when we hit about 190k vnodes. If we wake up the vnode washer in getnewvnode(), sleep until it is done, so that it has a chance to offer us a washed vnode. If we don't sleep here we'll just race ahead and allocate yet a vnode which will never get freed. In the vnodewasher, instead of doing 10 vnodes per mountpoint per rotation, do 10% of the vnodes distributed evenly across the mountpoints.
2002-12-29 10:39:05 +00:00
wakeup(&vnlruproc_sig);
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
msleep(vnlruproc, &vnode_free_list_mtx,
PVFS|PDROP, "vlruwt", hz);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
continue;
}
- Extend the vnode_free_list_mtx to cover numvnodes and freevnodes. This was done only some of the time before, and now it is uniformly applied.
2002-08-13 05:29:48 +00:00
mtx_unlock(&vnode_free_list_mtx);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
done = 0;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
onumvnodes = numvnodes;
/*
* Calculate parameters for recycling. These are the same
* throughout the loop to give some semblance of fairness.
* The trigger point is to avoid recycling vnodes with lots
* of resident pages. We aren't trying to free memory; we
* are trying to recycle or at least free vnodes.
*/
if (numvnodes <= desiredvnodes)
usevnodes = numvnodes - freevnodes;
else
usevnodes = numvnodes;
if (usevnodes <= 0)
usevnodes = 1;
/*
* The trigger value is is chosen to give a conservatively
* large value to ensure that it alone doesn't prevent
* making progress. The value can easily be so large that
* it is effectively infinite in some congested and
* misconfigured cases, and this is necessary. Normally
* it is about 8 to 100 (pages), which is quite large.
*/
trigger = vm_cnt.v_page_count * 2 / usevnodes;
if (force < 2)
trigger = vsmalltrigger;
reclaim_nc_src = force >= 3;
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
mtx_lock(&mountlist_mtx);
for (mp = TAILQ_FIRST(&mountlist); mp != NULL; mp = nmp) {
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
if (vfs_busy(mp, MBF_NOWAIT | MBF_MNTLSTLOCK)) {
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
nmp = TAILQ_NEXT(mp, mnt_list);
continue;
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
done += vlrureclaim(mp, reclaim_nc_src, trigger);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
mtx_lock(&mountlist_mtx);
nmp = TAILQ_NEXT(mp, mnt_list);
Decontextualize vfs_busy(), vfs_unbusy() and vfs_mount_alloc() functions. Manpages are updated accordingly. Tested by: Diego Sardina <siarodx at gmail dot com>
2008-08-31 14:26:08 +00:00
vfs_unbusy(mp);
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
}
mtx_unlock(&mountlist_mtx);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (onumvnodes > desiredvnodes && numvnodes <= desiredvnodes)
uma_reclaim();
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
if (done == 0) {
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (force == 0 || force == 1) {
force = 2;
continue;
}
if (force == 2) {
force = 3;
continue;
}
force = 0;
Use a different mechanism to get the vnlru process to wake up and notice the shutdown request at reboot/halt time. Disable the printf 'vnlru process getting nowhere, pausing...' and instead export the count to the debug.vnlru_nowhere sysctl.
2001-12-19 01:31:12 +00:00
vnlru_nowhere++;
Fix type-o in previous commit (tsleep was using wrong rendezvous point)
2001-12-25 01:23:25 +00:00
tsleep(vnlruproc, PPAUSE, "vlrup", hz * 3);
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
} else
Fixup r218424: uio_yield() was scaling directly to userland priority. When kern_yield() was introduced with the possibility to specify a new priority, the behaviour changed by not lowering priority at all in the consumers, making the yielding mechanism highly ineffective for high priority kthreads like bufdaemon, syncer, vlrudaemon, etc. There are no evidences that consumers could bear with such change in semantic and this situation could finally lead to bugs similar to the ones fixed in r244240. Re-specify userland pri for kthreads involved. Tested by: pho Reviewed by: kib, mdf MFC after: 1 week
2012-12-21 13:14:12 +00:00
kern_yield(PRI_USER);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* After becoming active to expand above low water, keep
* active until above high water.
*/
force = vspace() < vhiwat;
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
}
Implement kern.maxvnodes. adjusting kern.maxvnodes now actually has a real effect. Optimize vfs_msync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. Improves looping case by 500%. Optimize ffs_sync(). Avoid having to continually drop and re-obtain mutexes when scanning the vnode list. This makes a couple of assumptions, which I believe are ok, in regards to vnode stability when the mount list mutex is held. Improves looping case by 500%. (more optimization work is needed on top of these fixes) MFC after: 1 week
2001-10-26 00:08:05 +00:00
}
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
static struct kproc_desc vnlru_kp = {
"vnlru",
vnlru_proc,
&vnlruproc
};
In keeping with style(9)'s recommendations on macros, use a ';' after each SYSINIT() macro invocation. This makes a number of lightweight C parsers much happier with the FreeBSD kernel source, including cflow's prcc and lxr. MFC after: 1 month Discussed with: imp, rink
2008-03-16 10:58:09 +00:00
SYSINIT(vnlru, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start,
&vnlru_kp);
When there is no memory or KVA, try to help by reclaiming some vnodes. This helps with 'kmem_map too small' panics. No objections from: kib Tested by: Alexander V. Ribchansky <shurik@zk.informjust.ua> MFC after: 1 week
2010-05-12 16:42:28 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Routines having to do with the management of the vnode table.
*/
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
/*
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
* Try to recycle a freed vnode. We abort if anyone picks up a reference
* before we actually vgone(). This function must be called with the vnode
* held to prevent the vnode from being returned to the free list midway
* through vgone().
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
*/
static int
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
vtryrecycle(struct vnode *vp)
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
{
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
struct mount *vnmp;
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
VNASSERT(vp->v_holdcnt, vp,
("vtryrecycle: Recycling vp %p without a reference.", vp));
- In a Giantless world, the vn_lock() in vcanrecycle() could legitimately fail. Remove the panic from that case and document why it might fail. - Document the reason for calling cache_purge() on a newly created vnode. - In insmntque() order the operations so that we can call mtx_unlock() one fewer times. This makes the code somewhat clearer as well. - Add XXX comments in sched_sync() and vflush(). - In vget(), do not sleep while waiting for XLOCK to clear if LK_NOWAIT is set. - In vclean() we don't need to acquire a lock around a single TAILQ_FIRST call. It's ok if we race here, the vinvalbuf will just do nothing. - Increase the scope of the lock in vgonel() to reduce the number of lock operations that are performed.
2003-10-04 15:10:40 +00:00
/*
* This vnode may found and locked via some other list, if so we
* can't recycle it yet.
*/
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
if (VOP_LOCK(vp, LK_EXCLUSIVE | LK_NOWAIT) != 0) {
CTR2(KTR_VFS,
"%s: impossible to recycle, vp %p lock is already held",
__func__, vp);
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
return (EWOULDBLOCK);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
}
When considering a vnode for reuse in getnewvnode, we call vcanrecycle to check a free vnode's availability. If it is available, vcanrecycle returns an error code of zero and the vnode in question locked. The getnewvnode routine then used to call vn_start_write with the V_NOWAIT flag. If the filesystem was suspended while taking a snapshot, the vn_start_write would fail but getnewvnode would fail to unlock the vnode, instead leaving it locked on the freelist. The result would be that the vnode would be locked forever and would eventually hang the system with a race to the root when it was attempted to recycle it. This fix moves the vn_start_write check into vcanrecycle where it will properly unlock the vnode if it is unavailable for recycling due to filesystem suspension. Sponsored by: DARPA & NAI Labs.
2002-10-11 01:04:14 +00:00
/*
* Don't recycle if its filesystem is being suspended.
*/
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
if (vn_start_write(vp, &vnmp, V_NOWAIT) != 0) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS,
"%s: impossible to recycle, cannot start the write for %p",
__func__, vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
return (EBUSY);
When considering a vnode for reuse in getnewvnode, we call vcanrecycle to check a free vnode's availability. If it is available, vcanrecycle returns an error code of zero and the vnode in question locked. The getnewvnode routine then used to call vn_start_write with the V_NOWAIT flag. If the filesystem was suspended while taking a snapshot, the vn_start_write would fail but getnewvnode would fail to unlock the vnode, instead leaving it locked on the freelist. The result would be that the vnode would be locked forever and would eventually hang the system with a race to the root when it was attempted to recycle it. This fix moves the vn_start_write check into vcanrecycle where it will properly unlock the vnode if it is unavailable for recycling due to filesystem suspension. Sponsored by: DARPA & NAI Labs.
2002-10-11 01:04:14 +00:00
}
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
/*
* If we got this far, we need to acquire the interlock and see if
* anyone picked up this vnode from another list. If not, we will
- Now that there are no external users of vfree() make it static. - Move VSHOULDBUSY, VSHOULDFREE, and VTRYRECYCLE into vfs_subr.c so no one else attempts to grow a dependency on them. - Now that objects with pages hold the vnode we don't have to do unlocked checks for the page count in the vm object in VSHOULDFREE. These three macros could simply check for holdcnt state transitions to determine whether the vnode is on the free list already, but the extra safety the flag affords us is probably worth the minimal cost. - The leafonly sysctl and code have been dead for several years now, remove the sysctl and the code that employed it from vtryrecycle(). - vtryrecycle() also no longer has to check the object's page count as the object holds the vnode until it reaches 0. Sponsored by: Isilon Systems, Inc.
2005-03-15 14:38:16 +00:00
* mark it with DOOMED via vgonel() so that anyone who does find it
- Rename vcanrecycle() to vtryrecycle() to reflect its new role. - In vtryrecycle() try to vgonel the vnode if all of the previous checks passed. We won't vgonel if someone has either acquired a hold or usecount or started the vgone process elsewhere. This is because we may have been removed from the free list while we were inspecting the vnode for recycling. - The VI_TRYLOCK stops two threads from entering getnewvnode() and recycling the same vnode. To further reduce the likelyhood of this event, requeue the vnode on the tail of the list prior to calling vtryrecycle(). We can not actually remove the vnode from the list until we know that it's going to be recycled because other interlock holders may see the VI_FREE flag and try to remove it from the free list. - Kill a bogus XXX comment. If XLOCK is set we shouldn't wait for it regardless of MNT_WAIT because the vnode does not actually belong to this filesystem.
2003-10-05 05:35:41 +00:00
* will skip over it.
*/
VI_LOCK(vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
if (vp->v_usecount) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, LK_INTERLOCK);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vn_finished_write(vnmp);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS,
"%s: impossible to recycle, %p is already referenced",
__func__, vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
return (EBUSY);
- In vnlru_free() remove the vnode from the free list before we call vtryrecycle(). We could sometimes get into situations where two threads could try to recycle the same vnode before this. - vtryrecycle() is now responsible for returning the vnode to the free list if it fails and someone else hasn't done it. - Make a new function vfreehead() which moves a vnode to the head of the free list and use it in vgone() to clean up that code a bit. Sponsored by: Isilon Systems, Inc. Reported by: pho, kkenn
2005-04-30 11:22:40 +00:00
}
Add two new counters for vnode life cycle events: - vfs.recycles counts the number of vnodes forcefully recycled to avoid exceeding kern.maxvnodes. - vfs.vnodes_created counts the number of vnodes created by successful calls to getnewvnode(). Differential Revision: https://reviews.freebsd.org/D1671 Reviewed by: kib MFC after: 1 week
2015-02-14 17:02:51 +00:00
if ((vp->v_iflag & VI_DOOMED) == 0) {
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
counter_u64_add(recycles_count, 1);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vgonel(vp);
Add two new counters for vnode life cycle events: - vfs.recycles counts the number of vnodes forcefully recycled to avoid exceeding kern.maxvnodes. - vfs.vnodes_created counts the number of vnodes created by successful calls to getnewvnode(). Differential Revision: https://reviews.freebsd.org/D1671 Reviewed by: kib MFC after: 1 week
2015-02-14 17:02:51 +00:00
}
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, LK_INTERLOCK);
Always call vn_finished_write after vn_start_write was called. All occurences of 'goto done' after vn_start_write invocation were cleaning up incompletely.
2004-03-06 04:09:54 +00:00
vn_finished_write(vnmp);
- In vnlru_free() remove the vnode from the free list before we call vtryrecycle(). We could sometimes get into situations where two threads could try to recycle the same vnode before this. - vtryrecycle() is now responsible for returning the vnode to the free list if it fails and someone else hasn't done it. - Make a new function vfreehead() which moves a vnode to the head of the free list and use it in vgone() to clean up that code a bit. Sponsored by: Isilon Systems, Inc. Reported by: pho, kkenn
2005-04-30 11:22:40 +00:00
return (0);
- Move some logic from getnewvnode() to a new function vcanrecycle() - Unlock the free list mutex around vcanrecycle to prevent a lock order reversal.
2002-08-05 10:15:56 +00:00
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
static void
vcheckspace(void)
{
if (vspace() < vlowat && vnlruproc_sig == 0) {
vnlruproc_sig = 1;
wakeup(vnlruproc);
}
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* Wait if necessary for space for a new vnode.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
static int
getnewvnode_wait(int suspended)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
mtx_assert(&vnode_free_list_mtx, MA_OWNED);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (numvnodes >= desiredvnodes) {
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
if (suspended) {
Add a bandaid to avoid a deadlock in a situation, when we are trying to suspend a file system, but need to obtain a vnode. We may not be able to do it, because all vnodes could be already in use and other processes cannot release them, because they are waiting in "suspfs" state. In such situation, we allow to allocate a vnode anyway. This is a temporary fix - there is no backpressure to free vnodes allocated in those circumstances. MFC after: 1 week Reviewed by: tegge
2006-08-09 12:47:30 +00:00
/*
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* The file system is being suspended. We cannot
* risk a deadlock here, so allow allocation of
* another vnode even if this would give too many.
Add a bandaid to avoid a deadlock in a situation, when we are trying to suspend a file system, but need to obtain a vnode. We may not be able to do it, because all vnodes could be already in use and other processes cannot release them, because they are waiting in "suspfs" state. In such situation, we allow to allocate a vnode anyway. This is a temporary fix - there is no backpressure to free vnodes allocated in those circumstances. MFC after: 1 week Reviewed by: tegge
2006-08-09 12:47:30 +00:00
*/
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
return (0);
Add a bandaid to avoid a deadlock in a situation, when we are trying to suspend a file system, but need to obtain a vnode. We may not be able to do it, because all vnodes could be already in use and other processes cannot release them, because they are waiting in "suspfs" state. In such situation, we allow to allocate a vnode anyway. This is a temporary fix - there is no backpressure to free vnodes allocated in those circumstances. MFC after: 1 week Reviewed by: tegge
2006-08-09 12:47:30 +00:00
}
Vnodes pull in 800-900 bytes these days, all things counted, so we need to treat desiredvnodes much more like a limit than as a vague concept. On a 2GB RAM machine where desired vnodes is 130k, we run out of kmem_map space when we hit about 190k vnodes. If we wake up the vnode washer in getnewvnode(), sleep until it is done, so that it has a chance to offer us a washed vnode. If we don't sleep here we'll just race ahead and allocate yet a vnode which will never get freed. In the vnodewasher, instead of doing 10 vnodes per mountpoint per rotation, do 10% of the vnodes distributed evenly across the mountpoints.
2002-12-29 10:39:05 +00:00
if (vnlruproc_sig == 0) {
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
vnlruproc_sig = 1; /* avoid unnecessary wakeups */
Vnodes pull in 800-900 bytes these days, all things counted, so we need to treat desiredvnodes much more like a limit than as a vague concept. On a 2GB RAM machine where desired vnodes is 130k, we run out of kmem_map space when we hit about 190k vnodes. If we wake up the vnode washer in getnewvnode(), sleep until it is done, so that it has a chance to offer us a washed vnode. If we don't sleep here we'll just race ahead and allocate yet a vnode which will never get freed. In the vnodewasher, instead of doing 10 vnodes per mountpoint per rotation, do 10% of the vnodes distributed evenly across the mountpoints.
2002-12-29 10:39:05 +00:00
wakeup(vnlruproc);
}
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
msleep(&vnlruproc_sig, &vnode_free_list_mtx, PVFS,
"vlruwk", hz);
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/* Post-adjust like the pre-adjust in getnewvnode(). */
if (numvnodes + 1 > desiredvnodes && freevnodes > 1)
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
vnlru_free_locked(1, NULL);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
return (numvnodes >= desiredvnodes ? ENFILE : 0);
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* This hack is fragile, and probably not needed any more now that the
* watermark handling works.
*/
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
void
getnewvnode_reserve(u_int count)
{
struct thread *td;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/* Pre-adjust like the pre-adjust in getnewvnode(), with any count. */
/* XXX no longer so quick, but this part is not racy. */
mtx_lock(&vnode_free_list_mtx);
if (numvnodes + count > desiredvnodes && freevnodes > wantfreevnodes)
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
vnlru_free_locked(ulmin(numvnodes + count - desiredvnodes,
freevnodes - wantfreevnodes), NULL);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
mtx_unlock(&vnode_free_list_mtx);
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
td = curthread;
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
/* First try to be quick and racy. */
Remove extra branching from r267232. MFC after: 2 weeks
2014-06-08 19:01:37 +00:00
if (atomic_fetchadd_long(&numvnodes, count) + count <= desiredvnodes) {
td->td_vp_reserv += count;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
vcheckspace(); /* XXX no longer so quick, but more racy */
Remove extra branching from r267232. MFC after: 2 weeks
2014-06-08 19:01:37 +00:00
return;
} else
atomic_subtract_long(&numvnodes, count);
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
mtx_lock(&vnode_free_list_mtx);
while (count > 0) {
if (getnewvnode_wait(0) == 0) {
count--;
td->td_vp_reserv++;
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
atomic_add_long(&numvnodes, 1);
- Add a missing unlock of the vnode_free_list_mtx. Spotted by: Antoine Brodin
2005-04-04 12:07:16 +00:00
}
This is a forward port of Peter's vlrureclaim() fix, with some minor mods by me to make it more efficient. The original code had serious balancing problems and could also deadlock easily. This code relegates the vnode reclamation to its own kproc and relaxes the vnode reclamation requirements to better maintain kern.maxvnodes. This code still doesn't balance as well as it could, but it does a much better job then the original code. Approved by: re@freebsd.org Obtained from: ps, peter, dillon MFS Assuming: Assuming no problems crop up in Yahoo testing MFC after: 7 days
2001-12-18 20:48:54 +00:00
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
vcheckspace();
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
mtx_unlock(&vnode_free_list_mtx);
}
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
/*
* This hack is fragile, especially if desiredvnodes or wantvnodes are
* misconfgured or changed significantly. Reducing desiredvnodes below
* the reserved amount should cause bizarre behaviour like reducing it
* below the number of active vnodes -- the system will try to reduce
* numvnodes to match, but should fail, so the subtraction below should
* not overflow.
*/
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
void
getnewvnode_drop_reserve(void)
{
struct thread *td;
td = curthread;
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
atomic_subtract_long(&numvnodes, td->td_vp_reserv);
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
td->td_vp_reserv = 0;
}
/*
* Return the next vnode from the free list.
*/
int
getnewvnode(const char *tag, struct mount *mp, struct vop_vector *vops,
struct vnode **vpp)
{
struct vnode *vp;
struct thread *td;
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
struct lock_object *lo;
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
static int cyclecount;
vfs: annotate variables only used by debug builds as __unused
2018-05-19 04:59:39 +00:00
int error __unused;
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
CTR3(KTR_VFS, "%s: mp %p with tag %s", __func__, mp, tag);
vp = NULL;
td = curthread;
if (td->td_vp_reserv > 0) {
td->td_vp_reserv -= 1;
goto alloc;
}
mtx_lock(&vnode_free_list_mtx);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (numvnodes < desiredvnodes)
cyclecount = 0;
else if (cyclecount++ >= freevnodes) {
cyclecount = 0;
vstir = 1;
}
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
/*
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
* Grow the vnode cache if it will not be above its target max
* after growing. Otherwise, if the free list is nonempty, try
* to reclaim 1 item from it before growing the cache (possibly
* above its target max if the reclamation failed or is delayed).
* Otherwise, wait for some space. In all cases, schedule
* vnlru_proc() if we are getting short of space. The watermarks
* should be chosen so that we never wait or even reclaim from
* the free list to below its target minimum.
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
*/
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (numvnodes + 1 <= desiredvnodes)
;
else if (freevnodes > 0)
Add VFS interface to flush specified amount of free vnodes belonging to mount points with the given filesystem type, specified by mount vfs_ops pointer. Based on patch by: mckusick Reviewed by: avg, mckusick Tested by: allanjude, madpilot Sponsored by: The FreeBSD Foundation Approved by: re (gjb)
2016-06-17 17:33:25 +00:00
vnlru_free_locked(1, NULL);
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
else {
error = getnewvnode_wait(mp != NULL && (mp->mnt_kern_flag &
MNTK_SUSPEND));
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
#if 0 /* XXX Not all VFS_VGET/ffs_vget callers check returns. */
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
if (error != 0) {
mtx_unlock(&vnode_free_list_mtx);
return (error);
}
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
#endif
Rework the vnode cache recycling to meet free and unused vnodes targets. See the comment above wantfreevnodes variable for the description of the algorithm. The vfs.vlru_alloc_cache_src sysctl is removed. New code frees namecache sources as the last chance to satisfy the highest watermark, instead of selecting the source vnodes randomly. This provides good enough behaviour to keep vn_fullpath() working in most situations. The filesystem layout with deep trees, where the removed knob was required, is thus handled automatically. Submitted by: bde Discussed with: mckusick Tested by: pho MFC after: 1 month
2015-11-24 09:45:36 +00:00
}
vcheckspace();
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
atomic_add_long(&numvnodes, 1);
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
mtx_unlock(&vnode_free_list_mtx);
Add a KPI to allow to reserve some amount of space in the numvnodes counter, without actually allocating the vnodes. The supposed use of the getnewvnode_reserve(9) is to reclaim enough free vnodes while the code still does not hold any resources that might be needed during the reclamation, and to consume the slack later for getnewvnode() calls made from the innards. After the critical block is finished, the caller shall free any reserve left, by getnewvnode_drop_reserve(9). Reviewed by: avg Tested by: pho MFC after: 1 week
2012-10-14 19:43:37 +00:00
alloc:
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
counter_u64_add(vnodes_created, 1);
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp = (struct vnode *) uma_zalloc(vnode_zone, M_WAITOK);
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
/*
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
* Locks are given the generic name "vnode" when created.
* Follow the historic practice of using the filesystem
* name when they allocated, e.g., "zfs", "ufs", "nfs, etc.
*
* Locks live in a witness group keyed on their name. Thus,
* when a lock is renamed, it must also move from the witness
* group of its old name to the witness group of its new name.
*
* The change only needs to be made when the vnode moves
* from one filesystem type to another. We ensure that each
* filesystem use a single static name pointer for its tag so
* that we can compare pointers rather than doing a strcmp().
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
*/
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
lo = &vp->v_vnlock->lock_object;
if (lo->lo_name != tag) {
lo->lo_name = tag;
WITNESS_DESTROY(lo);
WITNESS_INIT(lo, tag);
}
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
/*
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
* By default, don't allow shared locks unless filesystems opt-in.
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
*/
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_vnlock->lock_object.lo_flags |= LK_NOSHARE;
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
/*
* Finalize various vnode identity bits.
*/
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
KASSERT(vp->v_object == NULL, ("stale v_object %p", vp));
KASSERT(vp->v_lockf == NULL, ("stale v_lockf %p", vp));
KASSERT(vp->v_pollinfo == NULL, ("stale v_pollinfo %p", vp));
Initialize v_rdev in getnewvnode() - it appears that some filesystems may not properly initialize this field in all cases, and this would result in very anti-social behavior (overwriting on some other random device/location). Submitted by: John Dyson
1995-02-27 06:50:08 +00:00
vp->v_type = VNON;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
vp->v_tag = tag;
vp->v_op = vops;
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
v_init_counters(vp);
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_bufobj.bo_ops = &buf_ops_bio;
vfs: hide the getvnode NULL mp message behind DIAGNOSTIC Since crossmp vnode changes the message was being printed on each boot. Reported by: trasz Discussed with: kib
2017-01-21 16:59:50 +00:00
#ifdef DIAGNOSTIC
if (mp == NULL && vops != &dead_vnodeops)
Improve debugging printf.
2017-01-22 15:27:14 +00:00
printf("NULL mp in getnewvnode(9), tag %s\n", tag);
vfs: hide the getvnode NULL mp message behind DIAGNOSTIC Since crossmp vnode changes the message was being printed on each boot. Reported by: trasz Discussed with: kib
2017-01-21 16:59:50 +00:00
#endif
Move vnode MAC label initialization to after the release of the vnode interlock in getnewvnode() to avoid possible sleeps while holding the mutex. Note that the warning from Witness is a slight false positive since we know there will be no contention on the interlock since we haven't made the vnode available for use yet, but the theory is not a bad one. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-09-30 20:51:48 +00:00
#ifdef MAC
Merge first in a series of TrustedBSD MAC Framework KPI changes from Mac OS X Leopard--rationalize naming for entry points to the following general forms: mac_<object>_<method/action> mac_<object>_check_<method/action> The previous naming scheme was inconsistent and mostly reversed from the new scheme. Also, make object types more consistent and remove spaces from object types that contain multiple parts ("posix_sem" -> "posixsem") to make mechanical parsing easier. Introduce a new "netinet" object type for certain IPv4/IPv6-related methods. Also simplify, slightly, some entry point names. All MAC policy modules will need to be recompiled, and modules not updates as part of this commit will need to be modified to conform to the new KPI. Sponsored by: SPARTA (original patches against Mac OS X) Obtained from: TrustedBSD Project, Apple Computer
2007-10-24 19:04:04 +00:00
mac_vnode_init(vp);
Slightly change the semantics of vnode labels for MAC: rather than "refreshing" the label on the vnode before use, just get the label right from inception. For single-label file systems, set the label in the generic VFS getnewvnode() code; for multi-label file systems, leave the labeling up to the file system. With UFS1/2, this means reading the extended attribute during vfs_vget() as the inode is pulled off disk, rather than hitting the extended attributes frequently during operations later, improving performance. This also corrects sematics for shared vnode locks, which were not previously present in the system. This chances the cache coherrency properties WRT out-of-band access to label data, but in an acceptable form. With UFS1, there is a small race condition during automatic extended attribute start -- this is not present with UFS2, and occurs because EAs aren't available at vnode inception. We'll introduce a work around for this shortly. Approved by: re Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-10-26 14:38:24 +00:00
if (mp != NULL && (mp->mnt_flag & MNT_MULTILABEL) == 0)
Merge first in a series of TrustedBSD MAC Framework KPI changes from Mac OS X Leopard--rationalize naming for entry points to the following general forms: mac_<object>_<method/action> mac_<object>_check_<method/action> The previous naming scheme was inconsistent and mostly reversed from the new scheme. Also, make object types more consistent and remove spaces from object types that contain multiple parts ("posix_sem" -> "posixsem") to make mechanical parsing easier. Introduce a new "netinet" object type for certain IPv4/IPv6-related methods. Also simplify, slightly, some entry point names. All MAC policy modules will need to be recompiled, and modules not updates as part of this commit will need to be modified to conform to the new KPI. Sponsored by: SPARTA (original patches against Mac OS X) Obtained from: TrustedBSD Project, Apple Computer
2007-10-24 19:04:04 +00:00
mac_vnode_associate_singlelabel(mp, vp);
Move vnode MAC label initialization to after the release of the vnode interlock in getnewvnode() to avoid possible sleeps while holding the mutex. Note that the warning from Witness is a slight false positive since we know there will be no contention on the interlock since we haven't made the vnode available for use yet, but the theory is not a bad one. Obtained from: TrustedBSD Project Sponsored by: DARPA, Network Associates Laboratories
2002-09-30 20:51:48 +00:00
#endif
Put the I/O block size in bufobj->bo_bsize. We keep si_bsize_phys around for now as that is the simplest way to pull the number out of disk device drivers in devfs_open(). The correct solution would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth when filesystems sit on GEOM, so don't bother for now.
2004-10-26 07:39:12 +00:00
if (mp != NULL) {
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_bufobj.bo_bsize = mp->mnt_stat.f_iosize;
Holding a vnode doesn't prevent v_mount from disappearing (when the vnode is inactivated), possibly leading to a NULL dereference when checking if the mount wants knotes to be activated in the VOP hooks. So, we add a new vnode flag VV_NOKNOTE that is only set in getnewvnode(), if necessary, and check it when activating knotes. Since the flags are not erased when a vnode is being held, we can safely read them. Reviewed by: kris@ MFC after: 3 days
2005-08-06 01:42:04 +00:00
if ((mp->mnt_kern_flag & MNTK_NOKNOTE) != 0)
vp->v_vflag |= VV_NOKNOTE;
Put the I/O block size in bufobj->bo_bsize. We keep si_bsize_phys around for now as that is the simplest way to pull the number out of disk device drivers in devfs_open(). The correct solution would be to do an ioctl(DIOCGSECTORSIZE), but the point is probably mooth when filesystems sit on GEOM, so don't bother for now.
2004-10-26 07:39:12 +00:00
}
Clean-up the vget mechanism by permanently attaching VM objects to vnodes, therefore vget doesn't need to do so anymore. Other minor improvements include the temp free vnode queue obeying the VAGE flag and a printf that warns of to-be-removed code being executed.
1998-02-23 06:59:52 +00:00
diff --git a/sys/kern/vfs_subr.c b/sys/kern/vfs_subr.c index 7c243b6..0bdaf36 100644 --- a/sys/kern/vfs_subr.c +++ b/sys/kern/vfs_subr.c @@ -279,6 +279,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, #define VSHOULDFREE(vp) (!((vp)->v_iflag & VI_FREE) && !(vp)->v_holdcnt) #define VSHOULDBUSY(vp) (((vp)->v_iflag & VI_FREE) && (vp)->v_holdcnt) +static int vnsz2log; /* * Initialize the vnode management data structures. @@ -293,6 +294,7 @@ SYSCTL_INT(_debug, OID_AUTO, vnlru_nowhere, CTLFLAG_RW, static void vntblinit(void *dummy __unused) { + u_int i; int physvnodes, virtvnodes; /* @@ -332,6 +334,9 @@ vntblinit(void *dummy __unused) syncer_maxdelay = syncer_mask + 1; mtx_init(&sync_mtx, "Syncer mtx", NULL, MTX_DEF); cv_init(&sync_wakeup, "syncer"); + for (i = 1; i <= sizeof(struct vnode); i <<= 1) + vnsz2log++; + vnsz2log--; } SYSINIT(vfs, SI_SUB_VFS, SI_ORDER_FIRST, vntblinit, NULL); @@ -1067,6 +1072,14 @@ alloc: } rangelock_init(&vp->v_rl); + /* + * For the filesystems which do not use vfs_hash_insert(), + * still initialize v_hash to have vfs_hash_index() useful. + * E.g., nullfs uses vfs_hash_index() on the lower vnode for + * its own hashing. + */ + vp->v_hash = (uintptr_t)vp >> vnsz2log; + *vpp = vp; return (0); }
2013-01-14 05:42:54 +00:00
/*
* For the filesystems which do not use vfs_hash_insert(),
* still initialize v_hash to have vfs_hash_index() useful.
* E.g., nullfs uses vfs_hash_index() on the lower vnode for
* its own hashing.
*/
vp->v_hash = (uintptr_t)vp >> vnsz2log;
- Don't recycle vnodes anymore. Free them once they are dead. getnewvnode now always allocates a new vnode. - Define a new function, vnlru_free, which frees vnodes from the free list. It takes as a parameter the number of vnodes to free, which is wantfreevnodes - freevnodes when called from vnlru_proc or 1 when called from getnewvnode(). For now, getnewvnode() still tries to reclaim a free vnode before creating a new one when we are near the limit. - Define a function, vdestroy, which handles the actual release of memory and teardown of locks, etc. This could become a uma_dtor() routine. - Get rid of minvnodes. Now wantfreevnodes is 1/4th the max vnodes. This keeps more unreferenced vnodes around so that files which have only been stat'd are less likely to be kicked out of the system before we have a chance to read them, etc. These vnodes may still be freed via the normal vnlru_proc() routines which may some day become a real lru.
2005-03-25 05:34:39 +00:00
*vpp = vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
/*
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
* Delete from old mount point vnode list, if on one.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Staticized.
1997-11-22 08:35:46 +00:00
static void
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
delmntque(struct vnode *vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
struct mount *mp;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
int active;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
mp = vp->v_mount;
- Add a ref count to the mount structure. Sleep for up to 3 seconds in vfs_mount_destroy waiting for this ref to hit 0. We don't print an error if we are rebooting as the root mount always retains some refernces by init proc. - Acquire a mnt ref for every vnode allocated to a mount point. Drop this ref only once vdestroy() has been called and the mount has been freed. - No longer NULL the v_mount pointer in delmntque() so that we may release the ref after vgone() has been called. This allows us to guarantee that the mount point structure will be valid until the last vnode has lost its last ref. - Fix a few places that rely on checking v_mount to detect recycling. Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-06 10:19:50 +00:00
if (mp == NULL)
return;
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
MNT_ILOCK(mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
VI_LOCK(vp);
KASSERT(mp->mnt_activevnodelistsize <= mp->mnt_nvnodelistsize,
("Active vnode list size %d > Vnode list size %d",
mp->mnt_activevnodelistsize, mp->mnt_nvnodelistsize));
active = vp->v_iflag & VI_ACTIVE;
vp->v_iflag &= ~VI_ACTIVE;
if (active) {
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_lock(&mp->mnt_listmtx);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
TAILQ_REMOVE(&mp->mnt_activevnodelist, vp, v_actfreelist);
mp->mnt_activevnodelistsize--;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
}
- Release the mount ref once the vnode has been recycled rather than once the last reference is dropped. I forgot that vnodes can stick around for a very long time until processes discover that they are dead. This means that a vnode reference is not sufficient to keep the mount referenced and even more code will be required to ref mount points. Discovered by: kris
2006-02-23 05:15:37 +00:00
vp->v_mount = NULL;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
VI_UNLOCK(vp);
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT(mp->mnt_nvnodelistsize > 0, vp,
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
("bad mount point vnode list size"));
TAILQ_REMOVE(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
mp->mnt_nvnodelistsize--;
- Release the mount ref once the vnode has been recycled rather than once the last reference is dropped. I forgot that vnodes can stick around for a very long time until processes discover that they are dead. This means that a vnode reference is not sufficient to keep the mount referenced and even more code will be required to ref mount points. Discovered by: kris
2006-02-23 05:15:37 +00:00
MNT_REL(mp);
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
MNT_IUNLOCK(mp);
}
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
static void
insmntque_stddtr(struct vnode *vp, void *dtr_arg)
{
vp->v_data = NULL;
vp->v_op = &dead_vnodeops;
vgone(vp);
vput(vp);
}
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
/*
* Insert into list of vnodes for the new mount point, if available.
*/
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
int
insmntque1(struct vnode *vp, struct mount *mp,
void (*dtr)(struct vnode *, void *), void *dtr_arg)
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
{
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
KASSERT(vp->v_mount == NULL,
("insmntque: vnode already on per mount vnode list"));
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT(mp != NULL, vp, ("Don't call insmntque(foo, NULL)"));
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
ASSERT_VOP_ELOCKED(vp, "insmntque: non-locked vp");
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
/*
* We acquire the vnode interlock early to ensure that the
* vnode cannot be recycled by another process releasing a
* holdcnt on it before we get it on both the vnode list
* and the active vnode list. The mount mutex protects only
* manipulation of the vnode list and the vnode freelist
* mutex protects only manipulation of the active vnode list.
* Hence the need to hold the vnode interlock throughout.
*/
- Add a ref count to the mount structure. Sleep for up to 3 seconds in vfs_mount_destroy waiting for this ref to hit 0. We don't print an error if we are rebooting as the root mount always retains some refernces by init proc. - Acquire a mnt ref for every vnode allocated to a mount point. Drop this ref only once vdestroy() has been called and the mount has been freed. - No longer NULL the v_mount pointer in delmntque() so that we may release the ref after vgone() has been called. This allows us to guarantee that the mount point structure will be valid until the last vnode has lost its last ref. - Fix a few places that rely on checking v_mount to detect recycling. Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-06 10:19:50 +00:00
MNT_ILOCK(mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
VI_LOCK(vp);
insmntque() is always called with the lock held in exclusive mode, then: - assume the lock is held in exclusive mode and remove a moot check about the lock acquisition. - in the destructor remove !MPSAFE specific chunk. Reviewed by: kib MFC after: 2 weeks
2012-11-19 20:43:19 +00:00
if (((mp->mnt_kern_flag & MNTK_NOINSMNTQ) != 0 &&
Introduce the VV_FORCEINSMQ vnode flag. It instructs the insmnque() function to ignore the unmounting and forces insertion of the vnode into the mount vnode list. Change insmntque() to fail when forced unmount is in progress and VV_FORCEINSMQ is not specified. Add an assertion to the insmntque(), requiring the vnode to be exclusively locked for mp-safe filesystems. Use the VV_FORCEINSMQ for the creation of the syncvnode. Tested by: pho Reviewed by: tegge MFC after: 1 month
2008-08-28 09:08:15 +00:00
((mp->mnt_kern_flag & MNTK_UNMOUNTF) != 0 ||
insmntque() is always called with the lock held in exclusive mode, then: - assume the lock is held in exclusive mode and remove a moot check about the lock acquisition. - in the destructor remove !MPSAFE specific chunk. Reviewed by: kib MFC after: 2 weeks
2012-11-19 20:43:19 +00:00
mp->mnt_nvnodelistsize == 0)) &&
(vp->v_vflag & VV_FORCEINSMQ) == 0) {
VI_UNLOCK(vp);
MNT_IUNLOCK(mp);
if (dtr != NULL)
dtr(vp, dtr_arg);
return (EBUSY);
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
}
vp->v_mount = mp;
- Add a ref count to the mount structure. Sleep for up to 3 seconds in vfs_mount_destroy waiting for this ref to hit 0. We don't print an error if we are rebooting as the root mount always retains some refernces by init proc. - Acquire a mnt ref for every vnode allocated to a mount point. Drop this ref only once vdestroy() has been called and the mount has been freed. - No longer NULL the v_mount pointer in delmntque() so that we may release the ref after vgone() has been called. This allows us to guarantee that the mount point structure will be valid until the last vnode has lost its last ref. - Fix a few places that rely on checking v_mount to detect recycling. Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-06 10:19:50 +00:00
MNT_REF(mp);
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
TAILQ_INSERT_TAIL(&mp->mnt_nvnodelist, vp, v_nmntvnodes);
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
VNASSERT(mp->mnt_nvnodelistsize >= 0, vp,
("neg mount point vnode list size"));
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
mp->mnt_nvnodelistsize++;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
KASSERT((vp->v_iflag & VI_ACTIVE) == 0,
("Activating already active vnode"));
vp->v_iflag |= VI_ACTIVE;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_lock(&mp->mnt_listmtx);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
TAILQ_INSERT_HEAD(&mp->mnt_activevnodelist, vp, v_actfreelist);
mp->mnt_activevnodelistsize++;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
VI_UNLOCK(vp);
- Add a ref count to the mount structure. Sleep for up to 3 seconds in vfs_mount_destroy waiting for this ref to hit 0. We don't print an error if we are rebooting as the root mount always retains some refernces by init proc. - Acquire a mnt ref for every vnode allocated to a mount point. Drop this ref only once vdestroy() has been called and the mount has been freed. - No longer NULL the v_mount pointer in delmntque() so that we may release the ref after vgone() has been called. This allows us to guarantee that the mount point structure will be valid until the last vnode has lost its last ref. - Fix a few places that rely on checking v_mount to detect recycling. Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-06 10:19:50 +00:00
MNT_IUNLOCK(mp);
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
return (0);
}
int
insmntque(struct vnode *vp, struct mount *mp)
{
return (insmntque1(vp, mp, insmntque_stddtr, NULL));
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
* Flush out and invalidate all buffers associated with a bufobj
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* Called with the underlying object locked.
*/
int
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
bufobj_invalbuf(struct bufobj *bo, int flags, int slpflag, int slptimeo)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Remove spls(). The locking that has replaced them is in place and they no longer serve as guidelines for future work.
2003-09-19 23:52:06 +00:00
int error;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
BO_LOCK(bo);
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
if (flags & V_SAVE) {
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
error = bufobj_wwait(bo, slpflag, slptimeo);
if (error) {
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_UNLOCK(bo);
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
return (error);
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
}
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
if (bo->bo_dirty.bv_cnt > 0) {
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_UNLOCK(bo);
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
if ((error = BO_SYNC(bo, MNT_WAIT)) != 0)
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
return (error);
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
/*
* XXX We could save a lock/unlock if this was only
* enabled under INVARIANTS
*/
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_LOCK(bo);
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
if (bo->bo_numoutput > 0 || bo->bo_dirty.bv_cnt > 0)
Submitted by: Kirk McKusick <mckusick@McKusick.COM> Fix for potential hang when trying to reboot the system or to forcibly unmount a soft update enabled filesystem. FreeBSD already handled the reboot case differently, this is however a better fix.
1998-06-10 18:13:19 +00:00
panic("vinvalbuf: dirty bufs");
}
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
}
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
/*
* If you alter this loop please notice that interlock is dropped and
* reacquired in flushbuflist. Special care is needed to ensure that
* no race conditions occur from this.
*/
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
do {
error = flushbuflist(&bo->bo_clean,
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
flags, bo, slpflag, slptimeo);
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
if (error == 0 && !(flags & V_CLEANONLY))
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
error = flushbuflist(&bo->bo_dirty,
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
flags, bo, slpflag, slptimeo);
Fix a bug I introduced in 1.561 which has caused considerable filesystem unhappiness lately. As far as I can tell, no files that have made it safely to disk have been endangered, but stuff in transit has been in peril. Pointy hat: phk
2005-01-16 21:09:39 +00:00
if (error != 0 && error != EAGAIN) {
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
BO_UNLOCK(bo);
return (error);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
} while (error != 0);
"bogus" fixes from 1.1.5 to work around some cache coherency problems.
1994-08-29 06:09:15 +00:00
vinvalbuf() was only waiting for write-I/O to complete. It really has to wait for both read AND write I/O to complete. Only NFS calls vinvalbuf() on an active vnode (when the server indicates that the file is stale), so this bug fix only effects NFS clients. MFC after: 3 days
2001-10-05 20:10:32 +00:00
/*
* Wait for I/O to complete. XXX needs cleaning up. The vnode can
* have write I/O in-progress but if there is a VM object then the
* VM object can also have read-I/O in-progress.
*/
do {
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
bufobj_wwait(bo, 0, 0);
Add V_VMIO flag for vinvalbuf(9) to indicate that the flush request was issued during VM-initiated i/o (pageout), so that the function does not try to flush or remove pages or wait for the vm object paging-in-progress counter. Reviewed by: markj Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week X-Differential revision: https://reviews.freebsd.org/D10241
2017-04-05 16:57:53 +00:00
if ((flags & V_VMIO) == 0) {
BO_UNLOCK(bo);
if (bo->bo_object != NULL) {
VM_OBJECT_WLOCK(bo->bo_object);
vm_object_pip_wait(bo->bo_object, "bovlbx");
VM_OBJECT_WUNLOCK(bo->bo_object);
}
BO_LOCK(bo);
vinvalbuf() was only waiting for write-I/O to complete. It really has to wait for both read AND write I/O to complete. Only NFS calls vinvalbuf() on an active vnode (when the server indicates that the file is stale), so this bug fix only effects NFS clients. MFC after: 3 days
2001-10-05 20:10:32 +00:00
}
Loose the v_dirty* and v_clean* alias macros. Check the count field where we just want to know the full/empty state, rather than using TAILQ_EMPTY() or TAILQ_FIRST().
2004-10-25 09:14:03 +00:00
} while (bo->bo_numoutput > 0);
Access vmobject via the bufobj instead of the vnode
2005-02-07 10:04:06 +00:00
BO_UNLOCK(bo);
Fixed splbio problems in vinvalbuf. Closes PR#2875, although fixed differently by me.
1997-03-05 04:54:54 +00:00
Don't attempt to sync pages in the V_SAVE case of vinvalbuf; doing so can lead to a deadlock. Just let the VM system deal with it.
1995-03-20 02:08:24 +00:00
/*
* Destroy the copy in the VM cache, too.
*/
Add the posix_fadvise(2) system call. It is somewhat similar to madvise(2) except that it operates on a file descriptor instead of a memory region. It is currently only supported on regular files. Just as with madvise(2), the advice given to posix_fadvise(2) can be divided into two types. The first type provide hints about data access patterns and are used in the file read and write routines to modify the I/O flags passed down to VOP_READ() and VOP_WRITE(). These modes are thus filesystem independent. Note that to ease implementation (and since this API is only advisory anyway), only a single non-normal range is allowed per file descriptor. The second type of hints are used to hint to the OS that data will or will not be used. These hints are implemented via a new VOP_ADVISE(). A default implementation is provided which does nothing for the WILLNEED request and attempts to move any clean pages to the cache page queue for the DONTNEED request. This latter case required two other changes. First, a new V_CLEANONLY flag was added to vinvalbuf(). This requests vinvalbuf() to only flush clean buffers for the vnode from the buffer cache and to not remove any backing pages from the vnode. This is used to ensure clean pages are not wired into the buffer cache before attempting to move them to the cache page queue. The second change adds a new vm_object_page_cache() method. This method is somewhat similar to vm_object_page_remove() except that instead of freeing each page in the specified range, it attempts to move clean pages to the cache queue if possible. To preserve the ABI of struct file, the f_cdevpriv pointer is now reused in a union to point to the currently active advice region if one is present for regular files. Reviewed by: jilles, kib, arch@ Approved by: re (kib) MFC after: 1 month
2011-11-04 04:02:50 +00:00
if (bo->bo_object != NULL &&
Add V_VMIO flag for vinvalbuf(9) to indicate that the flush request was issued during VM-initiated i/o (pageout), so that the function does not try to flush or remove pages or wait for the vm object paging-in-progress counter. Reviewed by: markj Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week X-Differential revision: https://reviews.freebsd.org/D10241
2017-04-05 16:57:53 +00:00
(flags & (V_ALT | V_NORMAL | V_CLEANONLY | V_VMIO)) == 0) {
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(bo->bo_object);
Add a new option, OBJPR_NOTMAPPED, to vm_object_page_remove(). Passing this option to vm_object_page_remove() asserts that the specified range of pages is not mapped, or more precisely that none of these pages have any managed mappings. Thus, vm_object_page_remove() need not call pmap_remove_all() on the pages. This change not only saves time by eliminating pointless calls to pmap_remove_all(), but it also eliminates an inconsistency in the use of pmap_remove_all() versus related functions, like pmap_remove_write(). It eliminates harmless but pointless calls to pmap_remove_all() that were being performed on PG_UNMANAGED pages. Update all of the existing assertions on pmap_remove_all() to reflect this change. Reviewed by: kib
2011-06-29 16:40:41 +00:00
vm_object_page_remove(bo->bo_object, 0, 0, (flags & V_SAVE) ?
OBJPR_CLEANONLY : 0);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(bo->bo_object);
"bogus" fixes from 1.1.5 to work around some cache coherency problems.
1994-08-29 06:09:15 +00:00
}
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
#ifdef INVARIANTS
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_LOCK(bo);
Allow vinvalbuf() to operate with the shared vnode lock. This mode allows other clean buffers to arrive while we flush the buf lists for the vnode, which is fine for the targeted use. We only need that all buffers existed at the time of the function start were flushed. In fact, only one assert has to be relaxed. In collaboration with: pho Reviewed by: rmacklem Sponsored by: The FreeBSD Foundation MFC after: 2 weeks X-Differential revision: https://reviews.freebsd.org/D12083
2017-08-20 10:07:45 +00:00
if ((flags & (V_ALT | V_NORMAL | V_CLEANONLY | V_VMIO |
V_ALLOWCLEAN)) == 0 && (bo->bo_dirty.bv_cnt > 0 ||
bo->bo_clean.bv_cnt > 0))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
panic("vinvalbuf: flush failed");
Allow vinvalbuf() to operate with the shared vnode lock. This mode allows other clean buffers to arrive while we flush the buf lists for the vnode, which is fine for the targeted use. We only need that all buffers existed at the time of the function start were flushed. In fact, only one assert has to be relaxed. In collaboration with: pho Reviewed by: rmacklem Sponsored by: The FreeBSD Foundation MFC after: 2 weeks X-Differential revision: https://reviews.freebsd.org/D12083
2017-08-20 10:07:45 +00:00
if ((flags & (V_ALT | V_NORMAL | V_CLEANONLY | V_VMIO)) == 0 &&
bo->bo_dirty.bv_cnt > 0)
panic("vinvalbuf: flush dirty failed");
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_UNLOCK(bo);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
/*
* Flush out and invalidate all buffers associated with a vnode.
* Called with the underlying object locked.
*/
int
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
vinvalbuf(struct vnode *vp, int flags, int slpflag, int slptimeo)
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
{
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR3(KTR_VFS, "%s: vp %p with flags %d", __func__, vp, flags);
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
ASSERT_VOP_LOCKED(vp, "vinvalbuf");
Do not flush buffers when the v_object of the passed vnode does not really belong to it. Such vnodes, with the pointers to other vnodes v_objects, are typically instantiated by the bypass filesystems. Invalidating mappings of other vnode pages and the pages is wrong, since reclamation of the upper vnode does not imply that lower vnode is reclaimed too. One of the consequences of the improper reclamation was destruction of the wired mappings of the lower vnode pages, triggering miscellaneous assertions in the VM system. Reported by: John Marshall <john.marshall@riverwillow.com.au> Tested by: John Marshall <john.marshall@riverwillow.com.au>, pho Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (gjb)
2013-10-09 18:43:29 +00:00
if (vp->v_object != NULL && vp->v_object->handle != vp)
return (0);
Remove the struct thread unuseful argument from bufobj interface. In particular following functions KPI results modified: - bufobj_invalbuf() - bufsync() and BO_SYNC() "virtual method" of the buffer objects set. Main consumers of bufobj functions are affected by this change too and, in particular, functions which changed their KPI are: - vinvalbuf() - g_vfs_close() Due to the KPI breakage, __FreeBSD_version will be bumped in a later commit. As a side note, please consider just temporary the 'curthread' argument passing to VOP_SYNC() (in bufsync()) as it will be axed out ASAP Reviewed by: kib Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-10-10 21:23:50 +00:00
return (bufobj_invalbuf(&vp->v_bufobj, flags, slpflag, slptimeo));
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
}
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
/*
* Flush out buffers on the specified list.
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
*
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
*/
static int
Whitespace fix.
2011-10-27 17:43:36 +00:00
flushbuflist(struct bufv *bufv, int flags, struct bufobj *bo, int slpflag,
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
int slptimeo)
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
{
struct buf *bp, *nbp;
Fix a bug I introduced in 1.561 which has caused considerable filesystem unhappiness lately. As far as I can tell, no files that have made it safely to disk have been endangered, but stuff in transit has been in peril. Pointy hat: phk
2005-01-16 21:09:39 +00:00
int retval, error;
Break out of loop if next buffer pointer has become invalid while flushing current buffer. Reviewed by: kan
2005-09-16 18:28:12 +00:00
daddr_t lblkno;
b_xflags_t xflags;
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
Fix a bug I introduced in 1.561 which has caused considerable filesystem unhappiness lately. As far as I can tell, no files that have made it safely to disk have been endangered, but stuff in transit has been in peril. Pointy hat: phk
2005-01-16 21:09:39 +00:00
retval = 0;
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
TAILQ_FOREACH_SAFE(bp, &bufv->bv_hd, b_bobufs, nbp) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
if (((flags & V_NORMAL) && (bp->b_xflags & BX_ALTDATA)) ||
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
((flags & V_ALT) && (bp->b_xflags & BX_ALTDATA) == 0)) {
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
continue;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
}
Break out of loop if next buffer pointer has become invalid while flushing current buffer. Reviewed by: kan
2005-09-16 18:28:12 +00:00
if (nbp != NULL) {
lblkno = nbp->b_lblkno;
Prepare to replace the buf splay with a trie: - Don't insert BKGRDMARKER bufs into the splay or dirty/clean buf lists. No consumers need to find them there and it complicates the tree. These flags are all FFS specific and could be moved out of the buf cache. - Use pbgetvp() and pbrelvp() to associate the background and journal bufs with the vp. Not only is this much cheaper it makes more sense for these transient bufs. - Fix the assertions in pbget* and pbrel*. It's not safe to check list pointers which were never initialized. Use the BX flags instead. We also check B_PAGING in reassignbuf() so this should cover all cases. Discussed with: kib, mckusick, attilio Sponsored by: EMC / Isilon Storage Division
2013-04-06 22:21:23 +00:00
xflags = nbp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN);
Break out of loop if next buffer pointer has become invalid while flushing current buffer. Reviewed by: kan
2005-09-16 18:28:12 +00:00
}
Fix a bug I introduced in 1.561 which has caused considerable filesystem unhappiness lately. As far as I can tell, no files that have made it safely to disk have been endangered, but stuff in transit has been in peril. Pointy hat: phk
2005-01-16 21:09:39 +00:00
retval = EAGAIN;
- Add an interlock argument to BUF_LOCK and BUF_TIMELOCK. - Remove the buftimelock mutex and acquire the buf's interlock to protect these fields instead. - Hold the vnode interlock while locking bufs on the clean/dirty queues. This reduces some cases from one BUF_LOCK with a LK_NOWAIT and another BUF_LOCK with a LK_TIMEFAIL to a single lock. Reviewed by: arch, mckusick
2003-02-25 03:37:48 +00:00
error = BUF_TIMELOCK(bp,
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK, BO_LOCKPTR(bo),
- Add an interlock argument to BUF_LOCK and BUF_TIMELOCK. - Remove the buftimelock mutex and acquire the buf's interlock to protect these fields instead. - Hold the vnode interlock while locking bufs on the clean/dirty queues. This reduces some cases from one BUF_LOCK with a LK_NOWAIT and another BUF_LOCK with a LK_TIMEFAIL to a single lock. Reviewed by: arch, mckusick
2003-02-25 03:37:48 +00:00
"flushbuf", slpflag, slptimeo);
if (error) {
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_LOCK(bo);
Give flushbuflist() a struct bufv as first argument and avoid home-rolling TAILQ_FOREACH_SAFE(). Loose the error pointer argument and return any errors the normal way. Return EAGAIN for the case where more work needs to be done.
2005-01-11 10:01:54 +00:00
return (error != ENOLCK ? error : EAGAIN);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
- Assert that the bufobj matches in flushbuflists. I still haven't gotten to root cause on exactly how this happens. - If the assert is disabled, we presently try to handle this case, but the BUF_UNLOCK was missing. Thus, if this condition ever hit we would leak a buf lock. Many thanks to Peter Holm for all his help in finding this bug. He really put more effort into it than I did.
2005-04-06 06:49:46 +00:00
KASSERT(bp->b_bufobj == bo,
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
("bp %p wrong b_bufobj %p should be %p",
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
bp, bp->b_bufobj, bo));
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
/*
* XXX Since there are no node locks for NFS, I
* believe there is a slight chance that a delayed
* write will occur while sleeping just above, so
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
* check for it.
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
*/
if (((bp->b_flags & (B_DELWRI | B_INVAL)) == B_DELWRI) &&
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
(flags & V_SAVE)) {
bremfree(bp);
bp->b_flags |= B_ASYNC;
bwrite(bp);
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_LOCK(bo);
Try to unbreak the vnode locking around vop_reclaim() (based mostly on patch from kan@). Pull bufobj_invalbuf() out of vinvalbuf() and make g_vfs call it on close. This is not yet a generally safe function, but for this very specific use it is safe. This solves the problem with buffers not being flushed by unmount or after failed mount attempts.
2005-02-19 11:44:57 +00:00
return (EAGAIN); /* XXX: why not loop ? */
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
bremfree(bp);
Do not set B_NOCACHE on buffers when releasing them in flushbuflist(). If B_NOCACHE is set the pages of vm backed buffers will be invalidated. However clean buffers can be backed by dirty VM pages so invalidating them can lead to data loss. Add support for flush dirty page in the data invalidation function of some network file systems. This fixes data losses during vnode recycling (and other code paths using invalbuf(*,V_SAVE,*,*)) for data written using an mmaped file. Collaborative effort by: jhb@,mohans@,peter@,ps@,ups@ Reviewed by: tegge@ MFC after: 7 days
2006-05-25 01:00:35 +00:00
bp->b_flags |= (B_INVAL | B_RELBUF);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
bp->b_flags &= ~B_ASYNC;
brelse(bp);
More vnode -> bufobj migration.
2005-01-11 10:16:39 +00:00
BO_LOCK(bo);
Avoid the nbp lookup in the final loop iteration in flushbuflist(). The end of the loop must re-lookup the next buf since the bufobj lock is dropped in the loop body. If the lookup fails, the loop is restarted. This mechanism non-obviously also terminates the loop when the end of the buf list is reached. Split up the two loops termination cases to make the code a bit less fragile. No functional change intended. Reviewed by: kib MFC after: 1 week Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12730
2017-10-20 14:56:13 +00:00
if (nbp == NULL)
break;
Simplify the loop step in the flushbuflist() and make it independed on the type stability of the buffers memory. Instead of memoizing pointer to the next buffer and validating it, remember the next logical block number in the bo list and re-lookup. Reviewed by: markj Tested by: pho Sponsored by: The FreeBSD Foundation
2015-12-16 08:39:51 +00:00
nbp = gbincore(bo, lblkno);
if (nbp == NULL || (nbp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN))
!= xflags)
Break out of loop if next buffer pointer has become invalid while flushing current buffer. Reviewed by: kan
2005-09-16 18:28:12 +00:00
break; /* nbp invalid */
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
Fix a bug I introduced in 1.561 which has caused considerable filesystem unhappiness lately. As far as I can tell, no files that have made it safely to disk have been endangered, but stuff in transit has been in peril. Pointy hat: phk
2005-01-16 21:09:39 +00:00
return (retval);
Add support to UFS2 to provide storage for extended attributes. As this code is not actually used by any of the existing interfaces, it seems unlikely to break anything (famous last words). The internal kernel interface to manipulate these attributes is invoked using two new IO_ flags: IO_NORMAL and IO_EXT. These flags may be specified in the ioflags word of VOP_READ, VOP_WRITE, and VOP_TRUNCATE. Specifying IO_NORMAL means that you want to do I/O to the normal data part of the file and IO_EXT means that you want to do I/O to the extended attributes part of the file. IO_NORMAL and IO_EXT are mutually exclusive for VOP_READ and VOP_WRITE, but may be specified individually or together in the case of VOP_TRUNCATE. For example, when removing a file, VOP_TRUNCATE is called with both IO_NORMAL and IO_EXT set. For backward compatibility, if neither IO_NORMAL nor IO_EXT is set, then IO_NORMAL is assumed. Note that the BA_ and IO_ flags have been `merged' so that they may both be used in the same flags word. This merger is possible by assigning the IO_ flags to the low sixteen bits and the BA_ flags the high sixteen bits. This works because the high sixteen bits of the IO_ word is reserved for read-ahead and help with write clustering so will never be used for flags. This merge lets us get away from code of the form: if (ioflags & IO_SYNC) flags |= BA_SYNC; For the future, I have considered adding a new field to the vattr structure, va_extsize. This addition could then be exported through the stat structure to allow applications to find out the size of the extended attribute storage and also would provide a more standard interface for truncating them (via VOP_SETATTR rather than VOP_TRUNCATE). I am also contemplating adding a pathconf parameter (for concreteness, lets call it _PC_MAX_EXTSIZE) which would let an application determine the maximum size of the extended atribute storage. Sponsored by: DARPA & NAI Labs.
2002-07-19 07:29:39 +00:00
}
Optimize vop_stdadvise(POSIX_FADV_DONTNEED). Instead of looking up a buffer for each block number in the range with gbincore(), look up the next instantiated buffer with the logical block number which is greater or equal to the next lblkno. This significantly speeds up the iteration for sparce-populated range. Move the iteration into new helper bnoreuselist(), which is structured similarly to flushbuflist(). Reported and tested by: pho Reviewed by: markj Sponsored by: The FreeBSD Foundation
2015-12-16 08:48:37 +00:00
int
bnoreuselist(struct bufv *bufv, struct bufobj *bo, daddr_t startn, daddr_t endn)
{
struct buf *bp;
int error;
daddr_t lblkno;
ASSERT_BO_LOCKED(bo);
Two fixes for excessive iterations after r292326. Advance the logical block number to the lblkno of the found block plus one, instead of incrementing the block number which was used for lookup. This change skips sparcely populated buffer ranges, similar to r292325, instead of doing useless lookups. Do not restart the bnoreuselist() from the start of the range if buffer lock cannot be obtained without sleep. Only retry lookup and lock for the same queue and same logical block number. Reported by: benno Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2016-01-05 14:48:40 +00:00
for (lblkno = startn;;) {
again:
Optimize vop_stdadvise(POSIX_FADV_DONTNEED). Instead of looking up a buffer for each block number in the range with gbincore(), look up the next instantiated buffer with the logical block number which is greater or equal to the next lblkno. This significantly speeds up the iteration for sparce-populated range. Move the iteration into new helper bnoreuselist(), which is structured similarly to flushbuflist(). Reported and tested by: pho Reviewed by: markj Sponsored by: The FreeBSD Foundation
2015-12-16 08:48:37 +00:00
bp = BUF_PCTRIE_LOOKUP_GE(&bufv->bv_root, lblkno);
In bnoreuselist(), check both ends of the specified logical block numbers range. This effectively skips indirect and extdata blocks on the buffer queue. Since their logical block numbers are negative, bnoreuselist() could loop infinitely. Reported and tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2016-02-17 19:39:57 +00:00
if (bp == NULL || bp->b_lblkno >= endn ||
bp->b_lblkno < startn)
Optimize vop_stdadvise(POSIX_FADV_DONTNEED). Instead of looking up a buffer for each block number in the range with gbincore(), look up the next instantiated buffer with the logical block number which is greater or equal to the next lblkno. This significantly speeds up the iteration for sparce-populated range. Move the iteration into new helper bnoreuselist(), which is structured similarly to flushbuflist(). Reported and tested by: pho Reviewed by: markj Sponsored by: The FreeBSD Foundation
2015-12-16 08:48:37 +00:00
break;
error = BUF_TIMELOCK(bp, LK_EXCLUSIVE | LK_SLEEPFAIL |
LK_INTERLOCK, BO_LOCKPTR(bo), "brlsfl", 0, 0);
if (error != 0) {
BO_RLOCK(bo);
Two fixes for excessive iterations after r292326. Advance the logical block number to the lblkno of the found block plus one, instead of incrementing the block number which was used for lookup. This change skips sparcely populated buffer ranges, similar to r292325, instead of doing useless lookups. Do not restart the bnoreuselist() from the start of the range if buffer lock cannot be obtained without sleep. Only retry lookup and lock for the same queue and same logical block number. Reported by: benno Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2016-01-05 14:48:40 +00:00
if (error == ENOLCK)
goto again;
return (error);
Optimize vop_stdadvise(POSIX_FADV_DONTNEED). Instead of looking up a buffer for each block number in the range with gbincore(), look up the next instantiated buffer with the logical block number which is greater or equal to the next lblkno. This significantly speeds up the iteration for sparce-populated range. Move the iteration into new helper bnoreuselist(), which is structured similarly to flushbuflist(). Reported and tested by: pho Reviewed by: markj Sponsored by: The FreeBSD Foundation
2015-12-16 08:48:37 +00:00
}
KASSERT(bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p",
bp, bp->b_bufobj, bo));
Two fixes for excessive iterations after r292326. Advance the logical block number to the lblkno of the found block plus one, instead of incrementing the block number which was used for lookup. This change skips sparcely populated buffer ranges, similar to r292325, instead of doing useless lookups. Do not restart the bnoreuselist() from the start of the range if buffer lock cannot be obtained without sleep. Only retry lookup and lock for the same queue and same logical block number. Reported by: benno Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2016-01-05 14:48:40 +00:00
lblkno = bp->b_lblkno + 1;
Optimize vop_stdadvise(POSIX_FADV_DONTNEED). Instead of looking up a buffer for each block number in the range with gbincore(), look up the next instantiated buffer with the logical block number which is greater or equal to the next lblkno. This significantly speeds up the iteration for sparce-populated range. Move the iteration into new helper bnoreuselist(), which is structured similarly to flushbuflist(). Reported and tested by: pho Reviewed by: markj Sponsored by: The FreeBSD Foundation
2015-12-16 08:48:37 +00:00
if ((bp->b_flags & B_MANAGED) == 0)
bremfree(bp);
bp->b_flags |= B_RELBUF;
/*
* In the VMIO case, use the B_NOREUSE flag to hint that the
* pages backing each buffer in the range are unlikely to be
* reused. Dirty buffers will have the hint applied once
* they've been written.
*/
if (bp->b_vp->v_object != NULL)
bp->b_flags |= B_NOREUSE;
brelse(bp);
BO_RLOCK(bo);
}
return (0);
}
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
/*
* Truncate a file's buffer and pages to a specified length. This
* is in lieu of the old vinvalbuf mechanism, which performed unneeded
* sync activity.
*/
int
Remove unused thread argument from vtruncbuf(). Reviewed by: kib
2012-04-23 13:21:28 +00:00
vtruncbuf(struct vnode *vp, struct ucred *cred, off_t length, int blksize)
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
{
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
struct buf *bp, *nbp;
- Remove spls(). The locking that has replaced them is in place and they no longer serve as guidelines for future work.
2003-09-19 23:52:06 +00:00
int anyfreed;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
int trunclbn;
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
struct bufobj *bo;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR5(KTR_VFS, "%s: vp %p with cred %p and block %d:%ju", __func__,
vp, cred, blksize, (uintmax_t)length);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
/*
* Round up to the *next* lbn.
*/
sys: extend use of the howmany() macro when available. We have a howmany() macro in the <sys/param.h> header that is convenient to re-use as it makes things easier to read.
2016-04-26 15:38:17 +00:00
trunclbn = howmany(length, blksize);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
ASSERT_VOP_LOCKED(vp, "vtruncbuf");
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
restart:
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
bo = &vp->v_bufobj;
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_LOCK(bo);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
anyfreed = 1;
for (;anyfreed;) {
anyfreed = 0;
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
TAILQ_FOREACH_SAFE(bp, &bo->bo_clean.bv_hd, b_bobufs, nbp) {
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
if (bp->b_lblkno < trunclbn)
continue;
if (BUF_LOCK(bp,
LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK,
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_LOCKPTR(bo)) == ENOLCK)
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
goto restart;
bremfree(bp);
bp->b_flags |= (B_INVAL | B_RELBUF);
bp->b_flags &= ~B_ASYNC;
brelse(bp);
anyfreed = 1;
When vtruncbuf() iterates over the vnode buffer list, lock buffer object before checking the validity of the next buffer pointer. Otherwise, the buffer might be reclaimed after the check, causing iteration to run into wrong buffer. Reported and tested by: pho MFC after: 1 week
2011-01-25 14:04:02 +00:00
BO_LOCK(bo);
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
if (nbp != NULL &&
(((nbp->b_xflags & BX_VNCLEAN) == 0) ||
(nbp->b_vp != vp) ||
(nbp->b_flags & B_DELWRI))) {
When vtruncbuf() iterates over the vnode buffer list, lock buffer object before checking the validity of the next buffer pointer. Otherwise, the buffer might be reclaimed after the check, causing iteration to run into wrong buffer. Reported and tested by: pho MFC after: 1 week
2011-01-25 14:04:02 +00:00
BO_UNLOCK(bo);
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
goto restart;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
}
}
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
TAILQ_FOREACH_SAFE(bp, &bo->bo_dirty.bv_hd, b_bobufs, nbp) {
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
if (bp->b_lblkno < trunclbn)
continue;
if (BUF_LOCK(bp,
LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK,
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_LOCKPTR(bo)) == ENOLCK)
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
goto restart;
bremfree(bp);
bp->b_flags |= (B_INVAL | B_RELBUF);
bp->b_flags &= ~B_ASYNC;
brelse(bp);
anyfreed = 1;
When vtruncbuf() iterates over the vnode buffer list, lock buffer object before checking the validity of the next buffer pointer. Otherwise, the buffer might be reclaimed after the check, causing iteration to run into wrong buffer. Reported and tested by: pho MFC after: 1 week
2011-01-25 14:04:02 +00:00
BO_LOCK(bo);
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
if (nbp != NULL &&
(((nbp->b_xflags & BX_VNDIRTY) == 0) ||
(nbp->b_vp != vp) ||
(nbp->b_flags & B_DELWRI) == 0)) {
When vtruncbuf() iterates over the vnode buffer list, lock buffer object before checking the validity of the next buffer pointer. Otherwise, the buffer might be reclaimed after the check, causing iteration to run into wrong buffer. Reported and tested by: pho MFC after: 1 week
2011-01-25 14:04:02 +00:00
BO_UNLOCK(bo);
Polish vtruncbuf() to improve readability and style a bit.
2004-10-21 14:13:54 +00:00
goto restart;
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
}
}
}
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
In kern_physio.c fix tsleep priority messup. In vfs_bio.c, remove b_generation count usage, remove redundant reassignbuf, remove redundant spl(s), manage page PG_ZERO flags more correctly, utilize in invalid value for b_offset until it is properly initialized. Add asserts for #ifdef DIAGNOSTIC, when b_offset is improperly used. when a process is not performing I/O, and just waiting on a buffer generally, make the sleep priority low. only check page validity in getblk for B_VMIO buffers. In vfs_cluster, add b_offset asserts, correct pointer calculation for clustered reads. Improve readability of certain parts of the code. Remove redundant spl(s). In vfs_subr, correct usage of vfs_bio_awrite (From Andrew Gallatin <gallatin@cs.duke.edu>). More vtruncbuf problems fixed.
1998-03-19 22:48:16 +00:00
if (length > 0) {
restartsync:
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
TAILQ_FOREACH_SAFE(bp, &bo->bo_dirty.bv_hd, b_bobufs, nbp) {
- Remove a dead check for bp->b_vp == vp in vtruncbuf(). This has not been possible for some time. - Lock the buf before accessing fields. This should very rarely be locked. - Assert that B_DELWRI is set after we acquire the buf. This should always be the case now.
2003-03-13 07:22:53 +00:00
if (bp->b_lblkno > 0)
continue;
/*
* Since we hold the vnode lock this should only
* fail if we're racing with the buf daemon.
*/
if (BUF_LOCK(bp,
LK_EXCLUSIVE | LK_SLEEPFAIL | LK_INTERLOCK,
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
BO_LOCKPTR(bo)) == ENOLCK) {
- Remove a dead check for bp->b_vp == vp in vtruncbuf(). This has not been possible for some time. - Lock the buf before accessing fields. This should very rarely be locked. - Assert that B_DELWRI is set after we acquire the buf. This should always be the case now.
2003-03-13 07:22:53 +00:00
goto restart;
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
}
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT((bp->b_flags & B_DELWRI), vp,
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
("buf(%p) on dirty queue without DELWRI", bp));
- Remove a dead check for bp->b_vp == vp in vtruncbuf(). This has not been possible for some time. - Lock the buf before accessing fields. This should very rarely be locked. - Assert that B_DELWRI is set after we acquire the buf. This should always be the case now.
2003-03-13 07:22:53 +00:00
bremfree(bp);
bawrite(bp);
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_LOCK(bo);
- Remove a dead check for bp->b_vp == vp in vtruncbuf(). This has not been possible for some time. - Lock the buf before accessing fields. This should very rarely be locked. - Assert that B_DELWRI is set after we acquire the buf. This should always be the case now.
2003-03-13 07:22:53 +00:00
goto restartsync;
Correct a severely evil bug in the vtruncbuf code. It didn't cause me any problems until after the previous commit. This problem then caused a severe case of creeping crud on my diskdrive, and hosed my system so bad, that I needed to do a complete reinstall. Sorry!!! I assume that others have manifest this bug.
1998-03-17 06:30:52 +00:00
}
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
bufobj_wwait(bo, 0, 0);
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(bo);
Some VM improvements, including elimination of alot of Sig-11 problems. Tor Egge and others have helped with various VM bugs lately, but don't blame him -- blame me!!! pmap.c: 1) Create an object for kernel page table allocations. This fixes a bogus allocation method previously used for such, by grabbing pages from the kernel object, using bogus pindexes. (This was a code cleanup, and perhaps a minor system stability issue.) pmap.c: 2) Pre-set the modify and accessed bits when prudent. This will decrease bus traffic under certain circumstances. vfs_bio.c, vfs_cluster.c: 3) Rather than calculating the beginning virtual byte offset multiple times, stick the offset into the buffer header, so that the calculated offset can be reused. (Long long multiplies are often expensive, and this is a probably unmeasurable performance improvement, and code cleanup.) vfs_bio.c: 4) Handle write recursion more intelligently (but not perfectly) so that it is less likely to cause a system panic, and is also much more robust. vfs_bio.c: 5) getblk incorrectly wrote out blocks that are incorrectly sized. The problem is fixed, and writes blocks out ONLY when B_DELWRI is true. vfs_bio.c: 6) Check that already constituted buffers have fully valid pages. If not, then make sure that the B_CACHE bit is not set. (This was a major source of Sig-11 type problems.) vfs_bio.c: 7) Fix a potential system deadlock due to an incorrectly specified sleep priority while waiting for a buffer write operation. The change that I made opens the system up to serious problems, and we need to examine the issue of process sleep priorities. vfs_cluster.c, vfs_bio.c: 8) Make clustered reads work more correctly (and more completely) when buffers are already constituted, but not fully valid. (This was another system reliability issue.) vfs_subr.c, ffs_inode.c: 9) Create a vtruncbuf function, which is used by filesystems that can truncate files. The vinvalbuf forced a file sync type operation, while vtruncbuf only invalidates the buffers past the new end of file, and also invalidates the appropriate pages. (This was a system reliabiliy and performance issue.) 10) Modify FFS to use vtruncbuf. vm_object.c: 11) Make the object rundown mechanism for OBJT_VNODE type objects work more correctly. Included in that fix, create pager entries for the OBJT_DEAD pager type, so that paging requests that might slip in during race conditions are properly handled. (This was a system reliability issue.) vm_page.c: 12) Make some of the page validation routines be a little less picky about arguments passed to them. Also, support page invalidation change the object generation count so that we handle generation counts a little more robustly. vm_pageout.c: 13) Further reduce pageout daemon activity when the system doesn't need help from it. There should be no additional performance decrease even when the pageout daemon is running. (This was a significant performance issue.) vnode_pager.c: 14) Teach the vnode pager to handle race conditions during vnode deallocations.
1998-03-16 01:56:03 +00:00
vnode_pager_setsize(vp, length);
return (0);
}
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
static void
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
buf_vlist_remove(struct buf *bp)
{
Simplify buf_vlist_remove(). Now that we have encapsulated the splaytree related information into a structure we can eliminate the half of this function.
2004-10-21 13:48:50 +00:00
struct bufv *bv;
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
KASSERT(bp->b_bufobj != NULL, ("No b_bufobj %p", bp));
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bp->b_bufobj);
- Try to catch the wrong bufobj panics a little earlier. I believe they are actually caused by a buf with both VNCLEAN and VNDIRTY set. In the traces it is clear that the buf is removed from the dirty queue while it is actually on the clean queue which leaves the tail pointer set. Assert that both flags are not set in buf_vlist_add and buf_vlist_remove. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-18 18:17:03 +00:00
KASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) !=
(BX_VNDIRTY|BX_VNCLEAN),
("buf_vlist_remove: Buf %p is on two lists", bp));
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
if (bp->b_xflags & BX_VNDIRTY)
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bv = &bp->b_bufobj->bo_dirty;
Simplify buf_vlist_remove(). Now that we have encapsulated the splaytree related information into a structure we can eliminate the half of this function.
2004-10-21 13:48:50 +00:00
else
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bv = &bp->b_bufobj->bo_clean;
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
BUF_PCTRIE_REMOVE(&bv->bv_root, bp->b_lblkno);
Move the VI_BWAIT flag into no bo_flag element of bufobj and call it BO_WWAIT Add bufobj_wref(), bufobj_wdrop() and bufobj_wwait() to handle the write count on a bufobj. Bufobj_wdrop() replaces vwakeup(). Use these functions all relevant places except in ffs_softdep.c where the use if interlocked_sleep() makes this impossible. Rename b_vnbufs to b_bobufs now that we touch all the relevant files anyway.
2004-10-21 15:53:54 +00:00
TAILQ_REMOVE(&bv->bv_hd, bp, b_bobufs);
Simplify buf_vlist_remove(). Now that we have encapsulated the splaytree related information into a structure we can eliminate the half of this function.
2004-10-21 13:48:50 +00:00
bv->bv_cnt--;
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
bp->b_xflags &= ~(BX_VNDIRTY | BX_VNCLEAN);
}
/*
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
* Add the buffer to the sorted clean or dirty block list.
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
*
* NOTE: xflags is passed as a constant, optimizing this inline function!
*/
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
static void
buf_vlist_add(struct buf *bp, struct bufobj *bo, b_xflags_t xflags)
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
{
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
struct bufv *bv;
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
struct buf *n;
int error;
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
Do not allow creation of the dirty buffers for the dead buffer objects, i.e. for buffer objects which vnode was reclaimed. Buffer cache cannot write such buffers. Return the error and discard the buffer immediately on write attempt. BO_DIRTY now always set during vnode reclamation, since it is used not only for the INVARIANTS checks. Do allow placement of the clean buffers on dead bufobj list, otherwise filesystems cannot use bufcache at all after the devvp reclaim. Reported and tested by: trasz Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-07-11 11:21:56 +00:00
KASSERT((xflags & BX_VNDIRTY) == 0 || (bo->bo_flag & BO_DEAD) == 0,
("dead bo %p", bo));
- Try to catch the wrong bufobj panics a little earlier. I believe they are actually caused by a buf with both VNCLEAN and VNDIRTY set. In the traces it is clear that the buf is removed from the dirty queue while it is actually on the clean queue which leaves the tail pointer set. Assert that both flags are not set in buf_vlist_add and buf_vlist_remove. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-18 18:17:03 +00:00
KASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) == 0,
("buf_vlist_add: Buf %p has existing xflags %d", bp, bp->b_xflags));
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
bp->b_xflags |= xflags;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
if (xflags & BX_VNDIRTY)
bv = &bo->bo_dirty;
else
bv = &bo->bo_clean;
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
/*
* Keep the list ordered. Optimize empty list insertion. Assume
* we tend to grow at the tail so lookup_le should usually be cheaper
* than _ge.
*/
if (bv->bv_cnt == 0 ||
bp->b_lblkno > TAILQ_LAST(&bv->bv_hd, buflists)->b_lblkno)
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
TAILQ_INSERT_TAIL(&bv->bv_hd, bp, b_bobufs);
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
else if ((n = BUF_PCTRIE_LOOKUP_LE(&bv->bv_root, bp->b_lblkno)) == NULL)
TAILQ_INSERT_HEAD(&bv->bv_hd, bp, b_bobufs);
else
TAILQ_INSERT_AFTER(&bv->bv_hd, n, bp, b_bobufs);
error = BUF_PCTRIE_INSERT(&bv->bv_root, bp);
if (error)
panic("buf_vlist_add: Preallocated nodes insufficient.");
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bv->bv_cnt++;
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
}
/*
Remove a stale descriptive comment for gbincore(). The splay trees referenced in the comment were converted to path-compressed tries in r250551. MFC after: 3 days
2015-07-05 22:44:41 +00:00
* Look up a buffer using the buffer tries.
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
*/
struct buf *
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
gbincore(struct bufobj *bo, daddr_t lblkno)
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
{
struct buf *bp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
ASSERT_BO_LOCKED(bo);
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
bp = BUF_PCTRIE_LOOKUP(&bo->bo_clean.bv_root, lblkno);
if (bp != NULL)
Optimize the use of splay in gbincore(). During a "make buildworld" the desired buffer is found at one of the roots more than 60% of the time. Thus, checking both roots before performing either splay eliminates unnecessary splays on the first tree splayed. Approved by: re (jhb)
2003-05-13 04:36:02 +00:00
return (bp);
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
return BUF_PCTRIE_LOOKUP(&bo->bo_dirty.bv_root, lblkno);
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Associate a buffer with a vnode.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bgetvp(struct vnode *vp, struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
struct bufobj *bo;
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
bo = &vp->v_bufobj;
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT(bp->b_vp == NULL, bp->b_vp, ("bgetvp: not free"));
KNFize, by bde.
1999-01-10 01:58:29 +00:00
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
CTR3(KTR_BUF, "bgetvp(%p) vp %p flags %X", bp, vp, bp->b_flags);
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT((bp->b_xflags & (BX_VNDIRTY|BX_VNCLEAN)) == 0, vp,
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
("bgetvp: bp already attached! %p", bp));
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
vhold(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
bp->b_vp = vp;
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
bp->b_bufobj = bo;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Insert onto list for new vnode.
*/
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
buf_vlist_add(bp, bo, BX_VNCLEAN);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Disassociate a buffer from a vnode.
*/
b_waiters cannot be adequately protected by the interlock because it is dropped after the call to lockmgr() so just revert this approach using something similar to the precedent one: BUF_LOCKWAITERS() just checks if there are waiters (not the actual number of them) and it is based on newly introduced lockmgr_waiters() which returns if the lockmgr has waiters or not. The name has been choosen differently by old lockwaiters() in order to not confuse them. KPI results enriched by this commit so __FreeBSD_version bumping and manpage update will be happening soon. 'struct buf' also changes, so kernel ABI is disturbed. Bug found by: jeff Approved by: jeff, kib
2008-03-28 12:30:12 +00:00
void
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
brelvp(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
struct bufobj *bo;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
struct vnode *vp;
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
CTR3(KTR_BUF, "brelvp(%p) vp %p flags %X", bp, bp->b_vp, bp->b_flags);
Split DIAGNOSTIC -> DIAGNOSTIC, INVARIANTS, and INVARIANT_SUPPORT as discussed on -hackers. Introduce 'KASSERT(assertion, ("panic message", args))' for simple check + panic. Reviewed by: msmith
1999-01-08 17:31:30 +00:00
KASSERT(bp->b_vp != NULL, ("brelvp: NULL"));
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old vnode list, if on one.
*/
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
vp = bp->b_vp; /* XXX */
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bo = bp->b_bufobj;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
BO_LOCK(bo);
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN))
buf_vlist_remove(bp);
- All buffers should either be clean or dirty. If neither of these flags are set when we attempt to remove a buffer from a queue we should panic. Hopefully this will catch the source of the wrong bufobj panics. Sponsored by: Isilon Systems, Inc.
2005-05-01 12:00:36 +00:00
else
panic("brelvp: Buffer %p not on queue.", bp);
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
if ((bo->bo_flag & BO_ONWORKLST) && bo->bo_dirty.bv_cnt == 0) {
bo->bo_flag &= ~BO_ONWORKLST;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_lock(&sync_mtx);
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
LIST_REMOVE(bo, bo_synclist);
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
syncer_worklist_len--;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_unlock(&sync_mtx);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bp->b_vp = NULL;
bp->b_bufobj = NULL;
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(bo);
vdrop(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Add an item to the syncer work queue.
*/
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
static void
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
vn_syncer_add_to_worklist(struct bufobj *bo, int delay)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
int slot;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
- Convert the bufobj lock to rwlock. - Use a shared bufobj lock in getblk() and inmem(). - Convert softdep's lk to rwlock to match the bufobj lock. - Move INFREECNT to b_flags and protect it with the buf lock. - Remove unnecessary locking around bremfree() and BKGRDINPROG. Sponsored by: EMC / Isilon Storage Division Discussed with: mckusick, kib, mdf
2013-05-31 00:43:41 +00:00
ASSERT_BO_WLOCKED(bo);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_lock(&sync_mtx);
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
if (bo->bo_flag & BO_ONWORKLST)
LIST_REMOVE(bo, bo_synclist);
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
else {
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
bo->bo_flag |= BO_ONWORKLST;
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
syncer_worklist_len++;
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
if (delay > syncer_maxdelay - 2)
delay = syncer_maxdelay - 2;
slot = (syncer_delayno + delay) & syncer_mask;
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
LIST_INSERT_HEAD(&syncer_workitem_pending[slot], bo, bo_synclist);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_unlock(&sync_mtx);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
static int
sysctl_vfs_worklist_len(SYSCTL_HANDLER_ARGS)
{
int error, len;
mtx_lock(&sync_mtx);
len = syncer_worklist_len - sync_vnode_count;
mtx_unlock(&sync_mtx);
error = SYSCTL_OUT(req, &len, sizeof(len));
return (error);
}
SYSCTL_PROC(_vfs, OID_AUTO, worklist_len, CTLTYPE_INT | CTLFLAG_RD, NULL, 0,
sysctl_vfs_worklist_len, "I", "Syncer thread worklist length");
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
static struct proc *updateproc;
Remove __P.
2002-03-19 21:25:46 +00:00
static void sched_sync(void);
Slight reorganization of kernel thread/process creation. Instead of using SYSINIT_KT() etc (which is a static, compile-time procedure), use a NetBSD-style kthread_create() interface. kproc_start is still available as a SYSINIT() hook. This allowed simplification of chunks of the sysinit code in the process. This kthread_create() is our old kproc_start internals, with the SYSINIT_KT fork hooks grafted in and tweaked to work the same as the NetBSD one. One thing I'd like to do shortly is get rid of nfsiod as a user initiated process. It makes sense for the nfs client code to create them on the fly as needed up to a user settable limit. This means that nfsiod doesn't need to be in /sbin and is always "available". This is a fair bit easier to do outside of the SYSINIT_KT() framework.
1999-07-01 13:21:46 +00:00
static struct kproc_desc up_kp = {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
"syncer",
sched_sync,
&updateproc
};
In keeping with style(9)'s recommendations on macros, use a ';' after each SYSINIT() macro invocation. This makes a number of lightweight C parsers much happier with the FreeBSD kernel source, including cflow's prcc and lxr. MFC after: 1 month Discussed with: imp, rink
2008-03-16 10:58:09 +00:00
SYSINIT(syncer, SI_SUB_KTHREAD_UPDATE, SI_ORDER_FIRST, kproc_start, &up_kp);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
static int
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
sync_vnode(struct synclist *slp, struct bufobj **bo, struct thread *td)
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
{
struct vnode *vp;
struct mount *mp;
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
*bo = LIST_FIRST(slp);
sync_vnode() has some messy code about locking in order to deal with mount fs needing Giant to be held when processing bufobjs. Use a different subqueue for pending workitems on filesystems requiring Giant. This simplifies the code notably and also reduces the number of Giant acquisitions (and the whole processing cost). Suggested by: jeff Reviewed by: kib Tested by: pho
2008-05-04 13:54:55 +00:00
if (*bo == NULL)
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
return (0);
vfs: remove the __bo_vnode field from struct vnode The pointer can be obtained using __containerof instead. Reviewed by: kib
2016-09-30 17:11:03 +00:00
vp = bo2vnode(*bo);
sync_vnode() has some messy code about locking in order to deal with mount fs needing Giant to be held when processing bufobjs. Use a different subqueue for pending workitems on filesystems requiring Giant. This simplifies the code notably and also reduces the number of Giant acquisitions (and the whole processing cost). Suggested by: jeff Reviewed by: kib Tested by: pho
2008-05-04 13:54:55 +00:00
if (VOP_ISLOCKED(vp) != 0 || VI_TRYLOCK(vp) == 0)
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
return (1);
/*
* We use vhold in case the vnode does not
* successfully sync. vhold prevents the vnode from
* going away when we unlock the sync_mtx so that
* we can acquire the vnode interlock.
*/
vholdl(vp);
mtx_unlock(&sync_mtx);
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
VI_UNLOCK(vp);
if (vn_start_write(vp, &mp, V_NOWAIT) != 0) {
vdrop(vp);
mtx_lock(&sync_mtx);
- Only return 1 from sync_vnode() in cases where the vnode is still at the head of the sync list. This prevents sched_sync() from re-queueing a vnode which may have been freed already. Discussed with: kib
2008-03-23 01:44:28 +00:00
return (*bo == LIST_FIRST(slp));
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
}
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
Remove the unused credential argument from VOP_FSYNC() and VFS_SYNC(). I'm not sure why a credential was added to these in the first place, it is not used anywhere and it doesn't make much sense: The credentials for syncing a file (ability to write to the file) should be checked at the system call level. Credentials for syncing one or more filesystems ("none") should be checked at the system call level as well. If the filesystem implementation needs a particular credential to carry out the syncing it would logically have to the cached mount credential, or a credential cached along with any delayed write data. Discussed with: rwatson
2005-01-11 07:36:22 +00:00
(void) VOP_FSYNC(vp, MNT_LAZY, td);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
vn_finished_write(mp);
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_LOCK(*bo);
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
if (((*bo)->bo_flag & BO_ONWORKLST) != 0) {
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
/*
* Put us back on the worklist. The worklist
* routine will remove us from our current
* position and then add us back in at a later
* position.
*/
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
vn_syncer_add_to_worklist(*bo, syncdelay);
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
}
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(*bo);
vdrop(vp);
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
mtx_lock(&sync_mtx);
return (0);
}
Add functions syncer_suspend() and syncer_resume(), which are supposed to be called before suspension and after resume, correspondingly. The syncer_suspend() ensures that all filesystems dirty data and metadata are saved to the permanent storage, and stops kernel threads which might modify filesystems. The syncer_resume() restores stopped threads. For now, only syncer is stopped. This is needed, because each sync loop causes superblock updates for UFS. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-12-08 16:48:57 +00:00
static int first_printf = 1;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* System filesystem synchronizer daemon.
*/
Be consistent about "static" functions: if the function is marked static in its prototype, mark it static at the definition too. Inspired by: FlexeLint warning #512
2002-09-28 17:15:38 +00:00
static void
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
sched_sync(void)
{
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
struct synclist *next, *slp;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
struct bufobj *bo;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
long starttime;
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
struct thread *td = curthread;
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
int last_work_seen;
int net_worklist_len;
int syncer_final_iter;
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
int error;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Unconditionally set last_work_seen while in the SYNCER_RUNNING state so that last_work_seen has a reasonable value at the transition to the SYNCER_SHUTTING_DOWN state, even if net_worklist_len happened to be zero at the time. Initialize last_work_seen to zero as a safety measure in case the syncer never ran in the SYNCER_RUNNING state. Tested by: phk
2004-07-05 21:32:01 +00:00
last_work_seen = 0;
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
syncer_final_iter = 0;
syncer_state = SYNCER_RUNNING;
use monotonic `time_uptime' instead of `time_second' Approved by: anholt (mentor) Discussed on: arch
2005-09-12 15:31:28 +00:00
starttime = time_uptime;
Un-staticize runningbufwakeup() and staticize updateproc. Add a new private thread flag to indicate that the thread should not sleep if runningbufspace is too large. Set this flag on the bufdaemon and syncer threads so that they skip the waitrunningbufspace() call in bufwrite() rather than than checking the proc pointer vs. the known proc pointers for these two threads. A way of preventing these threads from being starved for I/O but still placing limits on their outstanding I/O would be desirable. Set this flag in ffs_copyonwrite() to prevent bufwrite() calls from blocking on the runningbufspace check while holding snaplk. This prevents snaplk from being held for an arbitrarily long period of time if runningbufspace is high and greatly reduces the contention for snaplk. The disadvantage is that ffs_copyonwrite() can start a large amount of I/O if there are a large number of snapshots, which could cause a deadlock in other parts of the code. Call runningbufwakeup() in ffs_copyonwrite() to decrement runningbufspace before attempting to grab snaplk so that I/O requests waiting on snaplk are not counted in runningbufspace as being in-progress. Increment runningbufspace again before actually launching the original I/O request. Prior to the above two changes, the system could deadlock if enough I/O requests were blocked by snaplk to prevent runningbufspace from falling below lorunningspace and one of the bawrite() calls in ffs_copyonwrite() blocked in waitrunningbufspace() while holding snaplk. See <http://www.holm.cc/stress/log/cons143.html>
2005-09-30 01:30:01 +00:00
td->td_pflags |= TDP_NORUNNINGBUF;
Major update to the way synchronization is done in the kernel. Highlights include: * Mutual exclusion is used instead of spl*(). See mutex(9). (Note: The alpha port is still in transition and currently uses both.) * Per-CPU idle processes. * Interrupts are run in their own separate kernel threads and can be preempted (i386 only). Partially contributed by: BSDi (BSD/OS) Submissions by (at least): cp, dfr, dillon, grog, jake, jhb, sheldonh
2000-09-07 01:33:02 +00:00
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
EVENTHANDLER_REGISTER(shutdown_pre_sync, syncer_shutdown, td->td_proc,
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
SHUTDOWN_PRI_LAST);
Introduce a mechanism to suspend/resume system processes. Suspend syncer and bufdaemon prior to disk sync during system shutdown.
2000-01-07 08:36:44 +00:00
Simplify operations with sync_mtx in sched_sync(): - Don't drop the lock just to reacquire it again to check rushjob, this only wastes time. - Use msleep() to drop the mutex while sleeping instead of explicitly unlocking around tsleep. Reviewed by: pjd
2006-11-07 19:45:05 +00:00
mtx_lock(&sync_mtx);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
for (;;) {
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
if (syncer_state == SYNCER_FINAL_DELAY &&
syncer_final_iter == 0) {
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
mtx_unlock(&sync_mtx);
Rename the kthread_xxx (e.g. kthread_create()) calls to kproc_xxx as they actually make whole processes. Thos makes way for us to add REAL kthread_create() and friends that actually make theads. it turns out that most of these calls actually end up being moved back to the thread version when it's added. but we need to make this cosmetic change first. I'd LOVE to do this rename in 7.0 so that we can eventually MFC the new kthread_xxx() calls.
2007-10-20 23:23:23 +00:00
kproc_suspend_check(td->td_proc);
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
mtx_lock(&sync_mtx);
}
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
net_worklist_len = syncer_worklist_len - sync_vnode_count;
Tidy up system shutdown.
2004-07-15 04:29:48 +00:00
if (syncer_state != SYNCER_RUNNING &&
use monotonic `time_uptime' instead of `time_second' Approved by: anholt (mentor) Discussed on: arch
2005-09-12 15:31:28 +00:00
starttime != time_uptime) {
Tidy up system shutdown.
2004-07-15 04:29:48 +00:00
if (first_printf) {
Cosmetics - add missing space after ellipses in shutdown messages. MFC after: 1 month Sponsored by: The FreeBSD Foundation
2016-05-31 15:27:33 +00:00
printf("\nSyncing disks, vnodes remaining... ");
Tidy up system shutdown.
2004-07-15 04:29:48 +00:00
first_printf = 0;
}
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
printf("%d ", net_worklist_len);
Tidy up system shutdown.
2004-07-15 04:29:48 +00:00
}
use monotonic `time_uptime' instead of `time_second' Approved by: anholt (mentor) Discussed on: arch
2005-09-12 15:31:28 +00:00
starttime = time_uptime;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
* Push files whose dirty time has expired. Be careful
* of interrupt race on slp queue.
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
*
* Skip over empty worklist slots when shutting down.
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
do {
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
slp = &syncer_workitem_pending[syncer_delayno];
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
syncer_delayno += 1;
if (syncer_delayno == syncer_maxdelay)
syncer_delayno = 0;
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
next = &syncer_workitem_pending[syncer_delayno];
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
/*
* If the worklist has wrapped since the
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
* it was emptied of all but syncer vnodes,
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
* switch to the FINAL_DELAY state and run
* for one more second.
*/
if (syncer_state == SYNCER_SHUTTING_DOWN &&
net_worklist_len == 0 &&
last_work_seen == syncer_delayno) {
syncer_state = SYNCER_FINAL_DELAY;
syncer_final_iter = SYNCER_SHUTDOWN_SPEEDUP;
}
} while (syncer_state != SYNCER_RUNNING && LIST_EMPTY(slp) &&
Remove the support for using non-mpsafe filesystem modules. In particular, do not lock Giant conditionally when calling into the filesystem module, remove the VFS_LOCK_GIANT() and related macros. Stop handling buffers belonging to non-mpsafe filesystems. The VFS_VERSION is bumped to indicate the interface change which does not result in the interface signatures changes. Conducted and reviewed by: attilio Tested by: pho
2012-10-22 17:50:54 +00:00
syncer_worklist_len > 0);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
/*
* Keep track of the last time there was anything
* on the worklist other than syncer vnodes.
* Return to the SHUTTING_DOWN state if any
* new work appears.
*/
Unconditionally set last_work_seen while in the SYNCER_RUNNING state so that last_work_seen has a reasonable value at the transition to the SYNCER_SHUTTING_DOWN state, even if net_worklist_len happened to be zero at the time. Initialize last_work_seen to zero as a safety measure in case the syncer never ran in the SYNCER_RUNNING state. Tested by: phk
2004-07-05 21:32:01 +00:00
if (net_worklist_len > 0 || syncer_state == SYNCER_RUNNING)
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
last_work_seen = syncer_delayno;
Unconditionally set last_work_seen while in the SYNCER_RUNNING state so that last_work_seen has a reasonable value at the transition to the SYNCER_SHUTTING_DOWN state, even if net_worklist_len happened to be zero at the time. Initialize last_work_seen to zero as a safety measure in case the syncer never ran in the SYNCER_RUNNING state. Tested by: phk
2004-07-05 21:32:01 +00:00
if (net_worklist_len > 0 && syncer_state == SYNCER_FINAL_DELAY)
syncer_state = SYNCER_SHUTTING_DOWN;
Use curthread instead of the FIRST_THREAD_IN_PROC for vnlru and syncer, when applicable. Aquire Giant slightly later for vnlru. In the syncer, aquire the Giant only when a vnode belongs to the non-MPsafe fs. In both speedup_syncer() and syncer_shutdown(), remove the syncer thread from the lbolt sleep queue after the syncer state is modified, not before. Herded by: attilio Tested by: Peter Holm Reviewed by: ups MFC after: 1 week
2007-12-05 09:34:04 +00:00
while (!LIST_EMPTY(slp)) {
error = sync_vnode(slp, &bo, td);
Move the bit of the syncer which deals with vnodes into a separate function.
2004-11-14 15:24:38 +00:00
if (error == 1) {
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
LIST_REMOVE(bo, bo_synclist);
LIST_INSERT_HEAD(next, bo, bo_synclist);
- In sched_sync() test our preconditions prior to dropping the sync_mtx. This is so that we may grab the interlock while still holding the sync_mtx. We have to VI_TRYLOCK() because in all other cases the lock order runs the other way. - If we don't meet any of the preconditions, reinsert the vp into the list for the next second. - We don't need to panic if we fail to sync here because each FSYNC function handles this case. Removing this redundant code also simplifies locking.
2003-10-04 18:03:53 +00:00
continue;
}
free wdog_kern_pat calls in post-panic paths from under SW_WATCHDOG Those calls are useful with hardware watchdog drivers too. MFC after: 3 weeks
2012-06-03 08:01:12 +00:00
In the syncer, drop the sync mutex while patting the watchdog. Some watchdog drivers (like ipmi) need to sleep while patting the watchdog. See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK). Submitted by: asomers MFC after: 1 month Sponsored by: Spectra Logic MFSpectraBSD: 637548 on 2012/10/04
2014-10-01 15:32:28 +00:00
if (first_printf == 0) {
/*
* Drop the sync mutex, because some watchdog
* drivers need to sleep while patting
*/
mtx_unlock(&sync_mtx);
Add the watchdogs patting during the (shutdown time) disk syncing and disk dumping. With the option SW_WATCHDOG on, these operations are doomed to let watchdog fire, fi they take too long. I implemented the stubs this way because I really want wdog_kern_* KPI to not be dependant by SW_WATCHDOG being on (and really, the option only enables watchdog activation in hardclock) and also avoid to call them when not necessary (avoiding not-volountary watchdog activations). Sponsored by: Sandvine Incorporated Discussed with: emaste, des MFC after: 2 weeks
2011-04-28 16:02:05 +00:00
wdog_kern_pat(WD_LASTVAL);
In the syncer, drop the sync mutex while patting the watchdog. Some watchdog drivers (like ipmi) need to sleep while patting the watchdog. See sys/dev/ipmi/ipmi.c:ipmi_wd_event(), which calls malloc(M_WAITOK). Submitted by: asomers MFC after: 1 month Sponsored by: Spectra Logic MFSpectraBSD: 637548 on 2012/10/04
2014-10-01 15:32:28 +00:00
mtx_lock(&sync_mtx);
}
free wdog_kern_pat calls in post-panic paths from under SW_WATCHDOG Those calls are useful with hardware watchdog drivers too. MFC after: 3 weeks
2012-06-03 08:01:12 +00:00
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
if (syncer_state == SYNCER_FINAL_DELAY && syncer_final_iter > 0)
syncer_final_iter--;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* The variable rushjob allows the kernel to speed up the
* processing of the filesystem syncer process. A rushjob
* value of N tells the filesystem syncer to process the next
* N seconds worth of work on its queue ASAP. Currently rushjob
* is used by the soft update code to speed up the filesystem
* syncer process when the incore state is getting so far
* ahead of the disk that the kernel memory pool is being
* threatened with exhaustion.
*/
if (rushjob > 0) {
rushjob -= 1;
continue;
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
Fix comment typo and function declaration.
2006-11-07 19:07:33 +00:00
* Just sleep for a short period of time between
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
* iterations when shutting down to allow some I/O
* to happen.
*
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
* If it has taken us less than a second to process the
* current work, then wait. Otherwise start right over
* again. We can still lose time if any single round
* takes more than two seconds, but it does not really
* matter as we are just trying to generally pace the
* filesystem activity.
*/
- Restore dropping the priority of syncer down to PPAUSE when it is idle. This was lost when it was converted to using a condition variable instead of lbolt. - Drop the priority of flowtable down to PPAUSE when it is idle as well since it is a similar background task. MFC after: 2 weeks
2011-01-06 22:17:07 +00:00
if (syncer_state != SYNCER_RUNNING ||
time_uptime == starttime) {
thread_lock(td);
sched_prio(td, PPAUSE);
thread_unlock(td);
}
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
if (syncer_state != SYNCER_RUNNING)
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
cv_timedwait(&sync_wakeup, &sync_mtx,
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
hz / SYNCER_SHUTDOWN_SPEEDUP);
use monotonic `time_uptime' instead of `time_second' Approved by: anholt (mentor) Discussed on: arch
2005-09-12 15:31:28 +00:00
else if (time_uptime == starttime)
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
cv_timedwait(&sync_wakeup, &sync_mtx, hz);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
}
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
/*
* Request the syncer daemon to speed up its work.
* We never push it to speed up more than half of its
* normal turn time, otherwise it could take over the cpu.
*/
int
Fix comment typo and function declaration.
2006-11-07 19:07:33 +00:00
speedup_syncer(void)
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
{
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
int ret = 0;
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_lock(&sync_mtx);
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
if (rushjob < syncdelay / 2) {
rushjob += 1;
stat_rush_requests += 1;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
ret = 1;
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
}
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_unlock(&sync_mtx);
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
cv_broadcast(&sync_wakeup);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
return (ret);
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
}
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
/*
* Tell the syncer to speed up its work and run though its work
* list several times, then tell it to shut down.
*/
static void
syncer_shutdown(void *arg, int howto)
{
Don't attempt to trigger the syncer thread final sync code in the shutdown_pre_sync state if the RB_NOSYNC flag is set. This is the likely cause of hangs after a system panic that are keeping crash dumps from being done. This is a MFC candidate for RELENG_5. MFC after: 3 days
2004-08-20 19:21:47 +00:00
if (howto & RB_NOSYNC)
return;
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
mtx_lock(&sync_mtx);
Rework syncer termination code: Speed up the syncer when shutting down by sleeping for a shorter period of time instead of cranking up rushjob and using the normal one second sleep. Skip empty worklist slots when shutting down to avoid lengthy intervals of inactivity. Give I/O more time to complete between steps by not speeding the syncer quite as much. Terminate the syncer after one full pass through the worklist plus one second with the worklist containing nothing but syncer vnodes. Print an indication of shutdown progress to the console. Add a sysctl, vfs.worklist_len, to allow the size of the syncer worklist to be monitored.
2004-07-05 01:07:33 +00:00
syncer_state = SYNCER_SHUTTING_DOWN;
rushjob = 0;
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
mtx_unlock(&sync_mtx);
Remove the use of lbolt from the VFS syncer. It seems we only use `lbolt' inside the VFS syncer and the TTY layer now. Because I'm planning to replace the TTY layer next month, there's no reason to keep `lbolt' if it's only used in a single thread inside the kernel. Because the syncer code wanted to wake up the syncer thread before the timeout, it called sleepq_remove(). Because we now just use a condvar(9) with a timeout value of `hz', we can wake it up using cv_broadcast() without waking up any unrelated threads. Reviewed by: phk
2008-07-30 12:39:18 +00:00
cv_broadcast(&sync_wakeup);
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
kproc_shutdown(arg, howto);
}
Add functions syncer_suspend() and syncer_resume(), which are supposed to be called before suspension and after resume, correspondingly. The syncer_suspend() ensures that all filesystems dirty data and metadata are saved to the permanent storage, and stops kernel threads which might modify filesystems. The syncer_resume() restores stopped threads. For now, only syncer is stopped. This is needed, because each sync loop causes superblock updates for UFS. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-12-08 16:48:57 +00:00
void
syncer_suspend(void)
{
syncer_shutdown(updateproc, 0);
}
void
syncer_resume(void)
{
mtx_lock(&sync_mtx);
first_printf = 1;
syncer_state = SYNCER_RUNNING;
mtx_unlock(&sync_mtx);
cv_broadcast(&sync_wakeup);
kproc_resume(updateproc);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Reassign a buffer from one vnode to another.
* Used to assign file specific control information
* (indirect blocks) to the vnode to which they belong.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Eliminate unused second argument to reassignbuf() and simplify it accordingly.
2004-07-25 21:24:23 +00:00
reassignbuf(struct buf *bp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- In reassignbuf() don't unlock vp and lock newvp if they are the same. Doing so creates a race where the buf is on neither list. - Only vfree() in an error case in vclean() if VSHOULDFREE() thinks we should. - Convert the error case in vclean() to INVARIANTS from DIAGNOSTIC as this really should not happen and is fast to check.
2003-09-20 00:21:48 +00:00
struct vnode *vp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
struct bufobj *bo;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
int delay;
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
#ifdef INVARIANTS
struct bufv *bv;
#endif
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- In reassignbuf() don't unlock vp and lock newvp if they are the same. Doing so creates a race where the buf is on neither list. - Only vfree() in an error case in vclean() if VSHOULDFREE() thinks we should. - Convert the error case in vclean() to INVARIANTS from DIAGNOSTIC as this really should not happen and is fast to check.
2003-09-20 00:21:48 +00:00
vp = bp->b_vp;
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
bo = bp->b_bufobj;
The buffer queue mechanism has been reformulated. Instead of having QUEUE_AGE, QUEUE_LRU, and QUEUE_EMPTY we instead have QUEUE_CLEAN, QUEUE_DIRTY, QUEUE_EMPTY, and QUEUE_EMPTYKVA. With this patch clean and dirty buffers have been separated. Empty buffers with KVM assignments have been separated from truely empty buffers. getnewbuf() has been rewritten and now operates in a 100% optimal fashion. That is, it is able to find precisely the right kind of buffer it needs to allocate a new buffer, defragment KVM, or to free-up an existing buffer when the buffer cache is full (which is a steady-state situation for the buffer cache). Buffer flushing has been reorganized. Previously buffers were flushed in the context of whatever process hit the conditions forcing buffer flushing to occur. This resulted in processes blocking on conditions unrelated to what they were doing. This also resulted in inappropriate VFS stacking chains due to multiple processes getting stuck trying to flush dirty buffers or due to a single process getting into a situation where it might attempt to flush buffers recursively - a situation that was only partially fixed in prior commits. We have added a new daemon called the buf_daemon which is responsible for flushing dirty buffers when the number of dirty buffers exceeds the vfs.hidirtybuffers limit. This daemon attempts to dynamically adjust the rate at which dirty buffers are flushed such that getnewbuf() calls (almost) never block. The number of nbufs and amount of buffer space is now scaled past the 8MB limit that was previously imposed for systems with over 64MB of memory, and the vfs.{lo,hi}dirtybuffers limits have been relaxed somewhat. The number of physical buffers has been increased with the intention that we will manage physical I/O differently in the future. reassignbuf previously attempted to keep the dirtyblkhd list sorted which could result in non-deterministic operation under certain conditions, such as when a large number of dirty buffers are being managed. This algorithm has been changed. reassignbuf now keeps buffers locally sorted if it can do so cheaply, and otherwise gives up and adds buffers to the head of the dirtyblkhd list. The new algorithm is deterministic but not perfect. The new algorithm greatly reduces problems that previously occured when write_behind was turned off in the system. The P_FLSINPROG proc->p_flag bit has been replaced by the more descriptive P_BUFEXHAUST bit. This bit allows processes working with filesystem buffers to use available emergency reserves. Normal processes do not set this bit and are not allowed to dig into emergency reserves. The purpose of this bit is to avoid low-memory deadlocks. A small race condition was fixed in getpbuf() in vm/vm_pager.c. Submitted by: Matthew Dillon <dillon@apollo.backplane.com> Reviewed by: Kirk McKusick <mckusick@mckusick.com>
1999-07-04 00:25:38 +00:00
++reassignbufcalls;
Certain vnode buffer list operations were not being spl protected, and they needed to be. Brelse for example can be called at interrupt level, and the buffer list operations were not being protected from it.
1996-08-15 06:45:01 +00:00
- Add the tunable and sysctl for the mpsafevfs. It currently defaults to off. - Protect access to mnt_kern_flag with the mointpoint mutex. - Remove some KASSERTs which are not legal checks without the appropriate locks held. - Use VCANRECYCLE() rather than rolling several slightly different checks together. - Return from vtryrecycle() with a recycled vnode rather than a locked vnode. This simplifies some locking. - Remove several GIANT_REQUIRED lines. - Add a few KASSERTs to help with INACT debugging. Sponsored By: Isilon Systems, Inc.
2005-01-24 10:41:01 +00:00
CTR3(KTR_BUF, "reassignbuf(%p) vp %p flags %X",
bp, bp->b_vp, bp->b_flags);
This is a rather large commit that encompasses the new swapper, changes to the VM system to support the new swapper, VM bug fixes, several VM optimizations, and some additional revamping of the VM code. The specific bug fixes will be documented with additional forced commits. This commit is somewhat rough in regards to code cleanup issues. Reviewed by: "John S. Dyson" <root@dyson.iquest.net>, "David Greenman" <dg@root.com>
1999-01-21 08:29:12 +00:00
/*
* B_PAGING flagged buffers cannot be reassigned because their vp
* is not fully linked in.
*/
if (bp->b_flags & B_PAGING)
panic("cannot reassign paging buffer");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Delete from old vnode list, if on one.
*/
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_LOCK(bo);
Eliminate unused second argument to reassignbuf() and simplify it accordingly.
2004-07-25 21:24:23 +00:00
if (bp->b_xflags & (BX_VNDIRTY | BX_VNCLEAN))
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
buf_vlist_remove(bp);
- All buffers should either be clean or dirty. If neither of these flags are set when we attempt to remove a buffer from a queue we should panic. Hopefully this will catch the source of the wrong bufobj panics. Sponsored by: Isilon Systems, Inc.
2005-05-01 12:00:36 +00:00
else
panic("reassignbuf: Buffer %p not on queue.", bp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* If dirty, put on list of dirty buffers; otherwise insert onto list
* of clean buffers.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
if (bp->b_flags & B_DELWRI) {
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
if ((bo->bo_flag & BO_ONWORKLST) == 0) {
Eliminate unused second argument to reassignbuf() and simplify it accordingly.
2004-07-25 21:24:23 +00:00
switch (vp->v_type) {
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
case VDIR:
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
delay = dirdelay;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
break;
Convert various pieces of code to use vn_isdisk() rather than checking for vp->v_type == VBLK. In ccd: we don't need to call VOP_GETATTR to find the type of a vnode. Reviewed by: sos
1999-11-22 10:33:55 +00:00
case VCHR:
Remove a left over from userland buffer-cache access to disks.
2004-06-14 14:25:03 +00:00
delay = metadelay;
break;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
default:
Get rid of the global variable rushjob and replace it with a function in kern/vfs_subr.c named speedup_syncer() which handles the speedup request. Change the various clients of rushjob to use the new function.
1999-06-15 23:37:29 +00:00
delay = filedelay;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
vn_syncer_add_to_worklist(bo, delay);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
buf_vlist_add(bp, bo, BX_VNDIRTY);
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
} else {
Add b_bufobj to struct buf which eventually will eliminate the need for b_vp. Initialize b_bufobj for all buffers. Make incore() and gbincore() take a bufobj instead of a vnode. Make inmem() local to vfs_bio.c Change a lot of VI_[UN]LOCK(bp->b_vp) to BO_[UN]LOCK(bp->b_bufobj) also VI_MTX() to BO_MTX(), Make buf_vlist_add() take a bufobj instead of a vnode. Eliminate other uses of bp->b_vp where bp->b_bufobj will do. Various minor polishing: remove "register", turn panic into KASSERT, use new function declarations, TAILQ_FOREACH_SAFE() etc.
2004-10-22 08:47:20 +00:00
buf_vlist_add(bp, bo, BX_VNCLEAN);
Replace the global buffer hash table with per-vnode splay trees using a methodology similar to the vm_map_entry splay and the VM splay that Alan Cox is working on. Extensive testing has appeared to have shown no increase in overhead. Disadvantages Dirties more cache lines during lookups. Not as fast as a hash table lookup (but still N log N and optimal when there is locality of reference). Advantages vnode->v_dirtyblkhd is now perfectly sorted, making fsync/sync/filesystem syncer operate more efficiently. I get to rip out all the old hacks (some of which were mine) that tried to keep the v_dirtyblkhd tailq sorted. The per-vnode splay tree should be easier to lock / SMPng pushdown on vnodes will be easier. This commit along with another that Alan is working on for the VM page global hash table will allow me to implement ranged fsync(), optimize server-side nfs commit rpcs, and implement partial syncs by the filesystem syncer (aka filesystem syncer would detect that someone is trying to get the vnode lock, remembers its place, and skip to the next vnode). Note that the buffer cache splay is somewhat more complex then other splays due to special handling of background bitmap writes (multiple buffers with the same lblkno in the same vnode), and B_INVAL discontinuities between the old hash table and the existence of the buffer on the v_cleanblkhd list. Suggested by: alc
2002-07-10 17:02:32 +00:00
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
if ((bo->bo_flag & BO_ONWORKLST) && bo->bo_dirty.bv_cnt == 0) {
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_lock(&sync_mtx);
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
LIST_REMOVE(bo, bo_synclist);
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
syncer_worklist_len--;
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
mtx_unlock(&sync_mtx);
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
bo->bo_flag &= ~BO_ONWORKLST;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
}
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
#ifdef INVARIANTS
bv = &bo->bo_clean;
bp = TAILQ_FIRST(&bv->bv_hd);
KASSERT(bp == NULL || bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
bp = TAILQ_LAST(&bv->bv_hd, buflists);
KASSERT(bp == NULL || bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
bv = &bo->bo_dirty;
bp = TAILQ_FIRST(&bv->bv_hd);
KASSERT(bp == NULL || bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
bp = TAILQ_LAST(&bv->bv_hd, buflists);
KASSERT(bp == NULL || bp->b_bufobj == bo,
("bp %p wrong b_bufobj %p should be %p", bp, bp->b_bufobj, bo));
#endif
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(bo);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
static void
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
v_init_counters(struct vnode *vp)
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
{
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VNASSERT(vp->v_type == VNON && vp->v_data == NULL && vp->v_iflag == 0,
vp, ("%s called for an initialized vnode", __FUNCTION__));
ASSERT_VI_UNLOCKED(vp, __FUNCTION__);
refcount_init(&vp->v_holdcnt, 1);
refcount_init(&vp->v_usecount, 1);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
}
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
static void
v_incr_usecount_locked(struct vnode *vp)
{
ASSERT_VI_LOCKED(vp, __func__);
if ((vp->v_iflag & VI_OWEINACT) != 0) {
VNASSERT(vp->v_usecount == 0, vp,
("vnode with usecount and VI_OWEINACT set"));
vp->v_iflag &= ~VI_OWEINACT;
}
refcount_acquire(&vp->v_usecount);
v_incr_devcount(vp);
}
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
/*
Correct some comments after r294299. Sponsored by: Dell EMC Isilon
2016-10-04 21:44:20 +00:00
* Increment the use count on the vnode, taking care to reference
* the driver's usecount if this is a chardev.
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
*/
Fix the spechash lock order reversal by keeping an updated sum of v_usecount in the dev_t which vcount() can return without locking any vnodes. Seen by: jhb
2002-10-24 19:38:56 +00:00
static void
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
v_incr_usecount(struct vnode *vp)
Fix the spechash lock order reversal by keeping an updated sum of v_usecount in the dev_t which vcount() can return without locking any vnodes. Seen by: jhb
2002-10-24 19:38:56 +00:00
{
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
ASSERT_VI_UNLOCKED(vp, __func__);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
if (vp->v_type != VCHR &&
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
refcount_acquire_if_not_zero(&vp->v_usecount)) {
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VNASSERT((vp->v_iflag & VI_OWEINACT) == 0, vp,
("vnode with usecount and VI_OWEINACT set"));
} else {
VI_LOCK(vp);
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
v_incr_usecount_locked(vp);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_UNLOCK(vp);
}
vfs: move si_usecount manipulation to dedicated functions Reviewed by: kib
2015-07-11 16:28:12 +00:00
}
/*
* Increment si_usecount of the associated device, if any.
*/
static void
v_incr_devcount(struct vnode *vp)
{
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
ASSERT_VI_LOCKED(vp, __FUNCTION__);
vfs: move si_usecount manipulation to dedicated functions Reviewed by: kib
2015-07-11 16:28:12 +00:00
if (vp->v_type == VCHR && vp->v_rdev != NULL) {
dev_lock();
vp->v_rdev->si_usecount++;
dev_unlock();
}
}
/*
* Decrement si_usecount of the associated device, if any.
*/
static void
v_decr_devcount(struct vnode *vp)
{
ASSERT_VI_LOCKED(vp, __FUNCTION__);
In vrele() we can actually have a VCHR with v_rdev == NULL if we came from the bottom of addaliasu(). Don't panic.
2002-10-25 07:58:25 +00:00
if (vp->v_type == VCHR && vp->v_rdev != NULL) {
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_lock();
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vp->v_rdev->si_usecount--;
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_unlock();
Fix the spechash lock order reversal by keeping an updated sum of v_usecount in the dev_t which vcount() can return without locking any vnodes. Seen by: jhb
2002-10-24 19:38:56 +00:00
}
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Grab a particular vnode from the free list, increment its
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
* reference count and lock it. VI_DOOMED is set if the vnode
* is being destroyed. Only callers who specify LK_RETRY will
* see doomed vnodes. If inactive processing was delayed in
* vput try to do it here.
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
*
* Notes on lockless counter manipulation:
* _vhold, vputx and other routines make various decisions based
Fix typo. Note that atomic is still required even for interlocked case. Sponsored by: The FreeBSD Foundation Approved by: re (marius)
2016-06-20 15:45:50 +00:00
* on either holdcnt or usecount being 0. As long as either counter
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
* is not transitioning 0->1 nor 1->0, the manipulation can be done
Fix typo. Note that atomic is still required even for interlocked case. Sponsored by: The FreeBSD Foundation Approved by: re (marius)
2016-06-20 15:45:50 +00:00
* with atomic operations. Otherwise the interlock is taken covering
* both the atomic and additional actions.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
- Solve a race where we could lose a call to VOP_INACTIVE. If vget() waiting on a lock held the last usecount ref on a vnode and the lock failed we would not call INACTIVE. Solve this by only holding a holdcnt to prevent the vnode from disappearing while we wait on vn_lock. Other callers may now VOP_INACTIVE while we are waiting on the lock, however this race is acceptable, while losing INACTIVE is not. Discussed with: kan, pjd Tested by: kkenn Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-01 00:30:05 +00:00
vget(struct vnode *vp, int flags, struct thread *td)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
int error, oweinact;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- Disallow XFS mounting in write mode. The write support never worked really and there is no need to maintain it. - Fix vn_get() in order to let it call vget(9) with a valid locking request. vget(9) returns the vnode locked in order to prevent recycling, but in this case internal XFS locks alredy prevent it from happening, so it is safe to drop the vnode lock before to return by vn_get(). - Add a VNASSERT() in vget(9) in order to catch malformed locking requests. Discussed with: kan, kib Tested by: Lothar Braun <lothar at lobraun dot de>
2008-07-21 23:01:09 +00:00
VNASSERT((flags & LK_TYPE_MASK) != 0, vp,
("vget: invalid lock operation"));
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if ((flags & LK_INTERLOCK) != 0)
ASSERT_VI_LOCKED(vp, __func__);
else
ASSERT_VI_UNLOCKED(vp, __func__);
if ((flags & LK_VNHELD) != 0)
VNASSERT((vp->v_holdcnt > 0), vp,
("vget: LK_VNHELD passed but vnode not held"));
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR3(KTR_VFS, "%s: vp %p with flags %d", __func__, vp, flags);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if ((flags & LK_VNHELD) == 0)
_vhold(vp, (flags & LK_INTERLOCK) != 0);
if ((error = vn_lock(vp, flags)) != 0) {
- Solve a race where we could lose a call to VOP_INACTIVE. If vget() waiting on a lock held the last usecount ref on a vnode and the lock failed we would not call INACTIVE. Solve this by only holding a holdcnt to prevent the vnode from disappearing while we wait on vn_lock. Other callers may now VOP_INACTIVE while we are waiting on the lock, however this race is acceptable, while losing INACTIVE is not. Discussed with: kan, pjd Tested by: kkenn Sponsored by: Isilon Systems, Inc. MFC After: 1 week
2006-02-01 00:30:05 +00:00
vdrop(vp);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: impossible to lock vnode %p", __func__,
vp);
- Change the VOP_LOCK UPGRADE in vput() to do a LK_NOWAIT to avoid a potential lock order reversal. Also, don't unlock the vnode if this fails, lockmgr has already unlocked it for us. - Restructure vget() now that vn_lock() does all of VI_DOOMED checking for us and also handles the case where there is no real lock type. - If VI_OWEINACT is set, we need to upgrade the lock request to EXCLUSIVE so that we can call inactive. It's not legal to vget a vnode that hasn't had INACTIVE called yet. Sponsored by: Isilon Systems, Inc.
2005-04-11 09:28:32 +00:00
return (error);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
}
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
if (vp->v_iflag & VI_DOOMED && (flags & LK_RETRY) == 0)
panic("vget: vn_lock failed to return ENOENT\n");
/*
Fix some whitespace nits.
2010-04-03 11:19:20 +00:00
* We don't guarantee that any particular close will
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
* trigger inactive processing so just make a best effort
* here at preventing a reference to a removed file. If
* we don't succeed no harm is done.
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
*
* Upgrade our holdcnt to a usecount.
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
*/
Remove racy assert. The thread which changes vnode usecount from 0 to 1 does it under the vnode interlock, but the interlock is not owned by the asserting thread. As result, we might read increased use counter but also still see VI_OWEINACT. In collaboration with: nwhitehorn Hardware donated by: IBM LTC Sponsored by: The FreeBSD Foundation (kib) Approved by: re (gjb)
2016-07-03 01:56:48 +00:00
if (vp->v_type == VCHR ||
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
!refcount_acquire_if_not_zero(&vp->v_usecount)) {
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_LOCK(vp);
if ((vp->v_iflag & VI_OWEINACT) == 0) {
oweinact = 0;
} else {
oweinact = 1;
vp->v_iflag &= ~VI_OWEINACT;
}
refcount_acquire(&vp->v_usecount);
v_incr_devcount(vp);
if (oweinact && VOP_ISLOCKED(vp) == LK_EXCLUSIVE &&
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
(flags & LK_NOWAIT) == 0)
- Change the VOP_LOCK UPGRADE in vput() to do a LK_NOWAIT to avoid a potential lock order reversal. Also, don't unlock the vnode if this fails, lockmgr has already unlocked it for us. - Restructure vget() now that vn_lock() does all of VI_DOOMED checking for us and also handles the case where there is no real lock type. - If VI_OWEINACT is set, we need to upgrade the lock request to EXCLUSIVE so that we can call inactive. It's not legal to vget a vnode that hasn't had INACTIVE called yet. Sponsored by: Isilon Systems, Inc.
2005-04-11 09:28:32 +00:00
vinactive(vp, td);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_UNLOCK(vp);
- Greatly simplify vget() by removing the guarantee that any new references to a vnode with VI_OWEINACT set will force the vinactive() call. The kernel makes no guarantees about which reference was the last to close a file or when the actual inactive processing will happen. The previous code was designed to preserve existing semantics in the face of shared locks, however, this was unnecessary. Discussed with: mckusick
2008-03-24 04:22:58 +00:00
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
return (0);
}
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
/*
Correct some comments after r294299. Sponsored by: Dell EMC Isilon
2016-10-04 21:44:20 +00:00
* Increase the reference (use) and hold count of a vnode.
* This will also remove the vnode from the free list if it is presently free.
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Add the vnode interlock back around vref.
1997-12-29 16:54:03 +00:00
void
vref(struct vnode *vp)
{
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
_vhold(vp, false);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
v_incr_usecount(vp);
Add the vnode interlock back around vref.
1997-12-29 16:54:03 +00:00
}
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
void
vrefl(struct vnode *vp)
{
vrefl: Assert that the interlock is held. Sponsored by: Dell EMC Isilon MFC after: 2 weeks
2016-10-06 18:10:19 +00:00
ASSERT_VI_LOCKED(vp, __func__);
Add vrefl(), a locked variant of vref(9). This API has no in-tree consumers at the moment but is useful to at least one out-of-tree consumer, and naturally complements existing vnode refcount functions (vholdl(9), vdropl(9)). Obtained from: kib (sys/ portion) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D4947 Differential Revision: https://reviews.freebsd.org/D4953
2016-01-18 22:21:46 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
_vhold(vp, true);
v_incr_usecount_locked(vp);
}
vfs: add vrefact, to be used when the vnode has to be already active This allows blind increment of relevant counters which under contention is cheaper than inc-not-zero loops at least on amd64. Use it in some of the places which are guaranteed to see already active vnodes. Reviewed by: kib (previous version)
2016-12-12 15:37:11 +00:00
void
vrefact(struct vnode *vp)
{
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
if (__predict_false(vp->v_type == VCHR)) {
VNASSERT(vp->v_holdcnt > 0 && vp->v_usecount > 0, vp,
("%s: wrong ref counts", __func__));
vref(vp);
return;
}
#ifdef INVARIANTS
int old = atomic_fetchadd_int(&vp->v_holdcnt, 1);
VNASSERT(old > 0, vp, ("%s: wrong hold count", __func__));
old = atomic_fetchadd_int(&vp->v_usecount, 1);
VNASSERT(old > 0, vp, ("%s: wrong use count", __func__));
#else
refcount_acquire(&vp->v_holdcnt);
refcount_acquire(&vp->v_usecount);
#endif
}
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
/*
* Return reference count of a vnode.
*
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
* The results of this call are only guaranteed when some mechanism is used to
* stop other processes from gaining references to the vnode. This may be the
* case if the caller holds the only reference. This is also useful when stale
* data is acceptable as race conditions may be accounted for by some other
* means.
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
*/
int
vrefcnt(struct vnode *vp)
{
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
return (vp->v_usecount);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
}
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
#define VPUTX_VRELE 1
#define VPUTX_VPUT 2
#define VPUTX_VUNREF 3
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
/*
* Decrement the use and hold counts for a vnode.
*
* See an explanation near vget() as to why atomic operation is safe.
*/
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
static void
vputx(struct vnode *vp, int func)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
int error;
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
KASSERT(vp != NULL, ("vputx: null vp"));
if (func == VPUTX_VUNREF)
Allow shared-locked vnode to be passed to vunref(9). When shared-locked vnode is supplied as an argument to vunref(9) and resulting usecount is 0, set VI_OWEINACT and do not try to upgrade vnode lock. The later could cause vnode unlock, allowing the vnode to be reclaimed meantime. Tested by: pho MFC after: 1 week
2010-11-24 12:30:41 +00:00
ASSERT_VOP_LOCKED(vp, "vunref");
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
else if (func == VPUTX_VPUT)
ASSERT_VOP_LOCKED(vp, "vput");
else
KASSERT(func == VPUTX_VRELE, ("vputx: wrong func"));
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
ASSERT_VI_UNLOCKED(vp, __func__);
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
Move KASSERTs which checks value of v_usecount after vnode locking, so it will not produce wrong alarms.
2000-10-02 09:57:06 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if (vp->v_type != VCHR &&
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
refcount_release_if_not_last(&vp->v_usecount)) {
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
if (func == VPUTX_VPUT)
VOP_UNLOCK(vp, 0);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
vdrop(vp);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
return;
}
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_LOCK(vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
/*
* We want to hold the vnode until the inactive finishes to
* prevent vgone() races. We drop the use count here and the
* hold count below when we're done.
*/
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if (!refcount_release(&vp->v_usecount) ||
(vp->v_iflag & VI_DOINGINACT)) {
if (func == VPUTX_VPUT)
VOP_UNLOCK(vp, 0);
v_decr_devcount(vp);
vdropl(vp);
return;
}
v_decr_devcount(vp);
error = 0;
if (vp->v_usecount != 0) {
Replace all remaining calls to vprint(9) with vn_printf(9), and remove the old macro. MFC after: 1 month
2016-08-10 16:12:31 +00:00
vn_printf(vp, "vputx: usecount not zero for vnode ");
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
panic("vputx: usecount not zero");
}
CTR2(KTR_VFS, "%s: return vnode %p to the freelist", __func__, vp);
- Slightly rearrange vrele() to move the common case in one indentation level. Sponsored by: Isilon Systems, Inc.
2005-03-14 07:16:55 +00:00
/*
* We must call VOP_INACTIVE with the node locked. Mark
* as VI_DOINGINACT to avoid recursion.
*/
Use vn_start_secondary_write() and vn_finished_secondary_write() as a replacement for vn_write_suspend_wait() to better account for secondary write processing. Close race where secondary writes could be started after ffs_sync() returned but before the file system was marked as suspended. Detect if secondary writes or softdep processing occurred during vnode sync loop in ffs_sync() and retry the loop if needed.
2006-03-08 23:43:39 +00:00
vp->v_iflag |= VI_OWEINACT;
Allow shared-locked vnode to be passed to vunref(9). When shared-locked vnode is supplied as an argument to vunref(9) and resulting usecount is 0, set VI_OWEINACT and do not try to upgrade vnode lock. The later could cause vnode unlock, allowing the vnode to be reclaimed meantime. Tested by: pho MFC after: 1 week
2010-11-24 12:30:41 +00:00
switch (func) {
case VPUTX_VRELE:
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
error = vn_lock(vp, LK_EXCLUSIVE | LK_INTERLOCK);
- Slightly rearrange vrele() to move the common case in one indentation level. Sponsored by: Isilon Systems, Inc.
2005-03-14 07:16:55 +00:00
VI_LOCK(vp);
Allow shared-locked vnode to be passed to vunref(9). When shared-locked vnode is supplied as an argument to vunref(9) and resulting usecount is 0, set VI_OWEINACT and do not try to upgrade vnode lock. The later could cause vnode unlock, allowing the vnode to be reclaimed meantime. Tested by: pho MFC after: 1 week
2010-11-24 12:30:41 +00:00
break;
case VPUTX_VPUT:
if (VOP_ISLOCKED(vp) != LK_EXCLUSIVE) {
error = VOP_LOCK(vp, LK_UPGRADE | LK_INTERLOCK |
LK_NOWAIT);
VI_LOCK(vp);
}
break;
case VPUTX_VUNREF:
For vunref(), try to upgrade the vnode lock if the function was called with the vnode shared-locked. If upgrade succeeded, the inactivation can be done immediately, instead of being postponed. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (glebius)
2013-09-29 18:07:14 +00:00
if (VOP_ISLOCKED(vp) != LK_EXCLUSIVE) {
error = VOP_LOCK(vp, LK_TRYUPGRADE | LK_INTERLOCK);
VI_LOCK(vp);
}
Allow shared-locked vnode to be passed to vunref(9). When shared-locked vnode is supplied as an argument to vunref(9) and resulting usecount is 0, set VI_OWEINACT and do not try to upgrade vnode lock. The later could cause vnode unlock, allowing the vnode to be reclaimed meantime. Tested by: pho MFC after: 1 week
2010-11-24 12:30:41 +00:00
break;
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
}
vfs: always clear VI_OWEINACT in consumers bumping v_usecount Previously vputx would detect the condition and clear the flag. With this change it is invalid to have both v_usecount > 0 and the flag set. Assert the condition is met in all revlevant places. Reviewed by: kib
2015-07-11 16:28:55 +00:00
VNASSERT(vp->v_usecount == 0 || (vp->v_iflag & VI_OWEINACT) == 0, vp,
("vnode with usecount and VI_OWEINACT set"));
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
if (error == 0) {
if (vp->v_iflag & VI_OWEINACT)
vinactive(vp, curthread);
if (func != VPUTX_VUNREF)
VOP_UNLOCK(vp, 0);
Use vn_start_secondary_write() and vn_finished_secondary_write() as a replacement for vn_write_suspend_wait() to better account for secondary write processing. Close race where secondary writes could be started after ffs_sync() returned but before the file system was marked as suspended. Detect if secondary writes or softdep processing occurred during vnode sync loop in ffs_sync() and retry the loop if needed.
2006-03-08 23:43:39 +00:00
}
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdropl(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
/*
* Vnode put/release.
* If count drops to zero, call inactive routine and return to freelist.
*/
void
vrele(struct vnode *vp)
{
vputx(vp, VPUTX_VRELE);
}
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
/*
Style fixes based on comments by bde
2000-10-05 18:22:46 +00:00
* Release an already locked vnode. This give the same effects as
* unlock+vrele(), but takes less time and avoids releasing and
Universally adopt most conventional spelling of acquire.
2007-05-27 20:50:23 +00:00
* re-aquiring the lock (as vrele() acquires the lock internally.)
Style fixes: * Add lots of comments * Convert a couple of assertions to KASSERT() * Minimal whitespace & misapplied {} fixes * Convert #if 0 to #if COMPILING_LINT for code we presently do not support, but want to keep available. Reviewed by: adrian, markm
2000-09-22 12:22:36 +00:00
*/
Lots of improvements, including restructring the caching and management of vnodes and objects. There are some metadata performance improvements that come along with this. There are also a few prototypes added when the need is noticed. Changes include: 1) Cleaning up vref, vget. 2) Removal of the object cache. 3) Nuke vnode_pager_uncache and friends, because they aren't needed anymore. 4) Correct some missing LK_RETRY's in vn_lock. 5) Correct the page range in the code for msync. Be gentle, and please give me feedback asap.
1997-12-29 00:25:11 +00:00
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vput(struct vnode *vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
vputx(vp, VPUTX_VPUT);
}
Move KASSERTs which checks value of v_usecount after vnode locking, so it will not produce wrong alarms.
2000-10-02 09:57:06 +00:00
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
/*
* Release an exclusively locked vnode. Do not unlock the vnode lock.
*/
void
vunref(struct vnode *vp)
{
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
Add new function vunref(9) that decrements vnode use count (and hold count) while vnode is exclusively locked. The code for vput(9), vrele(9) and vunref(9) is merged. In collaboration with: pho Reviewed by: alc MFC after: 3 weeks
2010-01-17 21:24:27 +00:00
vputx(vp, VPUTX_VUNREF);
Fix the simple_lock problem with the physical I/O buffer code, and also fix the missing simple_unlock in vrele, and improve vrele/vput by merging them into one routine. BDE pointed these problems out.
1997-02-27 02:57:03 +00:00
}
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
/*
* Increase the hold count and activate if this is the first reference.
*/
- Expose vholdl() so it may be used outside of vfs_subr.c
2005-03-15 13:43:10 +00:00
void
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
_vhold(struct vnode *vp, bool locked)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
struct mount *mp;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if (locked)
ASSERT_VI_LOCKED(vp, __func__);
else
ASSERT_VI_UNLOCKED(vp, __func__);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
if (!locked) {
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
if (refcount_acquire_if_not_zero(&vp->v_holdcnt)) {
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
VNASSERT((vp->v_iflag & VI_FREE) == 0, vp,
("_vhold: vnode with holdcnt is free"));
return;
}
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_LOCK(vp);
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
}
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if ((vp->v_iflag & VI_FREE) == 0) {
refcount_acquire(&vp->v_holdcnt);
if (!locked)
VI_UNLOCK(vp);
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
return;
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
}
VNASSERT(vp->v_holdcnt == 0, vp,
("%s: wrong hold count", __func__));
VNASSERT(vp->v_op != NULL, vp,
("%s: vnode already reclaimed.", __func__));
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
/*
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
* Remove a vnode from the free list, mark it as in use,
* and put it on the active list.
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
*/
Allow vdrop() of a vnode not yet on the per-mount list after r306512. The old code allowed calling vdrop() before insmntque() to place the vnode back onto the freelist for later recycling. Some downstream consumers may rely on this support. Normally insmntque() failing is fine since is uses vgone() and immediately frees the vnode rather than attempting to add it to the freelist if vdrop() were used instead. Also assert that vhold() cannot be used on such a vnode. Reviewed by: kib, cem, markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12126
2017-08-28 19:29:51 +00:00
VNASSERT(vp->v_mount != NULL, vp,
("_vhold: vnode not on per mount vnode list"));
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mp = vp->v_mount;
mtx_lock(&mp->mnt_listmtx);
if ((vp->v_mflag & VMP_TMPMNTFREELIST) != 0) {
TAILQ_REMOVE(&mp->mnt_tmpfreevnodelist, vp, v_actfreelist);
mp->mnt_tmpfreevnodelistsize--;
vp->v_mflag &= ~VMP_TMPMNTFREELIST;
} else {
mtx_lock(&vnode_free_list_mtx);
TAILQ_REMOVE(&vnode_free_list, vp, v_actfreelist);
freevnodes--;
mtx_unlock(&vnode_free_list_mtx);
}
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
KASSERT((vp->v_iflag & VI_ACTIVE) == 0,
("Activating already active vnode"));
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
vp->v_iflag &= ~VI_FREE;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
vp->v_iflag |= VI_ACTIVE;
TAILQ_INSERT_HEAD(&mp->mnt_activevnodelist, vp, v_actfreelist);
mp->mnt_activevnodelistsize++;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
refcount_acquire(&vp->v_holdcnt);
if (!locked)
VI_UNLOCK(vp);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
/*
* Drop the hold count of the vnode. If this is the last reference to
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
* the vnode we place it on the free list unless it has been vgone'd
* (marked VI_DOOMED) in which case we will free it.
Move the comment about resident pages preventing vnode from leaving active list, into the header comment for vdrop(), which is the function that decides whether to leave the vnode on the list. Note that dirty page write-out in vinactive() is asynchronous. Discussed with: alc Sponsored by: The FreeBSD Foundation MFC after: 1 week
2015-11-27 01:16:35 +00:00
*
* Because the vnode vm object keeps a hold reference on the vnode if
* there is at least one resident non-cached page, the vnode cannot
* leave the active list without the page cleanup done.
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
*/
Make vdropl() public; zfs needs it. There is also plenty of existing file system code (mostly *_reclaim()) which look like this: VOP_LOCK(vp); /* examine vp */ VOP_UNLOCK(vp); vdrop(vp); This can now be rewritten to: VOP_LOCK(vp); /* examine vp */ vdropl(vp); /* will unlock vp */ MFC after: 1 week
2007-03-31 23:57:17 +00:00
void
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
_vdrop(struct vnode *vp, bool locked)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
struct bufobj *bo;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
struct mount *mp;
int active;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if (locked)
ASSERT_VI_LOCKED(vp, __func__);
else
ASSERT_VI_UNLOCKED(vp, __func__);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if ((int)vp->v_holdcnt <= 0)
- Increment the holdcnt once for each usecount reference. This allows us to use only the holdcnt to determine whether a vnode may be recycled, simplifying the V* macros as well as vtryrecycle(), etc. Sponsored by: Isilon Systems, Inc.
2005-03-14 09:25:19 +00:00
panic("vdrop: holdcnt %d", vp->v_holdcnt);
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
if (!locked) {
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
if (refcount_release_if_not_last(&vp->v_holdcnt))
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
return;
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
VI_LOCK(vp);
vfs: tidy up vdrop Skip vfs_refcount_release_if_not_last if the interlock is held and just go straight to refcount_release. While here do cosmetic rearrangement of _vhold to better show it contains equivalent behaviour.
2018-01-12 13:39:02 +00:00
}
vfs: implement v_holdcnt/v_usecount manipulation using atomic ops Transitions 0->1 and 1->0 (which decide e.g. on putting the vnode on the free list) of either counter are still guarded with vnode interlock. Reviewed by: kib (earlier version) Tested by: pho
2015-07-16 13:57:05 +00:00
if (refcount_release(&vp->v_holdcnt) == 0) {
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
VI_UNLOCK(vp);
return;
}
if ((vp->v_iflag & VI_DOOMED) == 0) {
/*
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
* Mark a vnode as free: remove it from its active list
* and put it up for recycling on the freelist.
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
*/
VNASSERT(vp->v_op != NULL, vp,
("vdropl: vnode already reclaimed."));
VNASSERT((vp->v_iflag & VI_FREE) == 0, vp,
("vnode already free"));
Remove one-time use macros which check for the vnode lifecycle. More, some parts of the checks are in fact redundand in the surrounding code, and it is more clear what the conditions are by direct testing of the flags. Two of the three macros were only used in assertions. In vnlru_free(), all relevant parts of vholdl() were already inlined, except the increment of v_holdcnt itself. Do not call vholdl() to do the increment as well, this allows to make assertions in vholdl()/vhold() more strict. In v_incr_usecount(), call vholdl() before incrementing other ref counters. The change is no-op, but it makes less surprising to see the vnode state in debugger if interrupted inside v_incr_usecount(). Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-07-29 16:42:34 +00:00
VNASSERT(vp->v_holdcnt == 0, vp,
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
("vdropl: freeing when we shouldn't"));
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
active = vp->v_iflag & VI_ACTIVE;
vfs_msync(), called from syncer vnode fsync VOP, only iterates over the active vnode list for the given mount point, with the assumption that vnodes with dirty pages are active. This is enforced by vinactive() doing vm_object_page_clean() pass over the vnode pages. The issue is, if vinactive() cannot be called during vput() due to the vnode being only shared-locked, we might end up with the dirty pages for the vnode on the free list. Such vnode is invisible to syncer, and pages are only cleaned on the vnode reactivation. In other words, the race results in the broken guarantee that user data, written through the mmap(2), is written to the disk not later than in 30 seconds after the write. Fix this by keeping the vnode which is freed but still owing inactivation, on the active list. When syncer loops find such vnode, it is deactivated and cleaned by the final vput() call. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-06-17 04:46:58 +00:00
if ((vp->v_iflag & VI_OWEINACT) == 0) {
vp->v_iflag &= ~VI_ACTIVE;
mp = vp->v_mount;
Allow vdrop() of a vnode not yet on the per-mount list after r306512. The old code allowed calling vdrop() before insmntque() to place the vnode back onto the freelist for later recycling. Some downstream consumers may rely on this support. Normally insmntque() failing is fine since is uses vgone() and immediately frees the vnode rather than attempting to add it to the freelist if vdrop() were used instead. Also assert that vhold() cannot be used on such a vnode. Reviewed by: kib, cem, markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12126
2017-08-28 19:29:51 +00:00
if (mp != NULL) {
mtx_lock(&mp->mnt_listmtx);
if (active) {
TAILQ_REMOVE(&mp->mnt_activevnodelist,
vp, v_actfreelist);
mp->mnt_activevnodelistsize--;
}
TAILQ_INSERT_TAIL(&mp->mnt_tmpfreevnodelist,
vp, v_actfreelist);
mp->mnt_tmpfreevnodelistsize++;
vp->v_iflag |= VI_FREE;
vp->v_mflag |= VMP_TMPMNTFREELIST;
VI_UNLOCK(vp);
if (mp->mnt_tmpfreevnodelistsize >=
mnt_free_list_batch)
vnlru_return_batch_locked(mp);
mtx_unlock(&mp->mnt_listmtx);
} else {
VNASSERT(active == 0, vp,
("vdropl: active vnode not on per mount "
"vnode list"));
mtx_lock(&vnode_free_list_mtx);
TAILQ_INSERT_TAIL(&vnode_free_list, vp,
vfs_msync(), called from syncer vnode fsync VOP, only iterates over the active vnode list for the given mount point, with the assumption that vnodes with dirty pages are active. This is enforced by vinactive() doing vm_object_page_clean() pass over the vnode pages. The issue is, if vinactive() cannot be called during vput() due to the vnode being only shared-locked, we might end up with the dirty pages for the vnode on the free list. Such vnode is invisible to syncer, and pages are only cleaned on the vnode reactivation. In other words, the race results in the broken guarantee that user data, written through the mmap(2), is written to the disk not later than in 30 seconds after the write. Fix this by keeping the vnode which is freed but still owing inactivation, on the active list. When syncer loops find such vnode, it is deactivated and cleaned by the final vput() call. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-06-17 04:46:58 +00:00
v_actfreelist);
Allow vdrop() of a vnode not yet on the per-mount list after r306512. The old code allowed calling vdrop() before insmntque() to place the vnode back onto the freelist for later recycling. Some downstream consumers may rely on this support. Normally insmntque() failing is fine since is uses vgone() and immediately frees the vnode rather than attempting to add it to the freelist if vdrop() were used instead. Also assert that vhold() cannot be used on such a vnode. Reviewed by: kib, cem, markj Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12126
2017-08-28 19:29:51 +00:00
freevnodes++;
vp->v_iflag |= VI_FREE;
VI_UNLOCK(vp);
mtx_unlock(&vnode_free_list_mtx);
vfs_msync(), called from syncer vnode fsync VOP, only iterates over the active vnode list for the given mount point, with the assumption that vnodes with dirty pages are active. This is enforced by vinactive() doing vm_object_page_clean() pass over the vnode pages. The issue is, if vinactive() cannot be called during vput() due to the vnode being only shared-locked, we might end up with the dirty pages for the vnode on the free list. Such vnode is invisible to syncer, and pages are only cleaned on the vnode reactivation. In other words, the race results in the broken guarantee that user data, written through the mmap(2), is written to the disk not later than in 30 seconds after the write. Fix this by keeping the vnode which is freed but still owing inactivation, on the active list. When syncer loops find such vnode, it is deactivated and cleaned by the final vput() call. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-06-17 04:46:58 +00:00
}
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
} else {
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
VI_UNLOCK(vp);
vfs: switch nodes_created, recycles_count and free_owe_inact to counter(9) Reviewed by: kib
2016-12-31 19:59:31 +00:00
counter_u64_add(free_owe_inact, 1);
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
}
return;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
}
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
/*
* The vnode has been marked for destruction, so free it.
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
*
* The vnode will be returned to the zone where it will
* normally remain until it is needed for another vnode. We
* need to cleanup (or verify that the cleanup has already
* been done) any residual data left from its current use
* so as not to contaminate the freshly allocated vnode.
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
*/
CTR2(KTR_VFS, "%s: destroying the vnode %p", __func__, vp);
Use atomics to modify numvnodes variable. This allows to mostly avoid lock usage in getnewvnode_[drop_]reserve(), that reduces number of global vnode_free_list_mtx mutex acquisitions from 4 to 2 per NFS request on ZFS, improving SMP scalability. Reviewed by: kib MFC after: 2 weeks Sponsored by: iXsystems, Inc.
2014-06-08 15:38:40 +00:00
atomic_subtract_long(&numvnodes, 1);
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
bo = &vp->v_bufobj;
VNASSERT((vp->v_iflag & VI_FREE) == 0, vp,
("cleaned vnode still on the free list."));
VNASSERT(vp->v_data == NULL, vp, ("cleaned vnode isn't"));
VNASSERT(vp->v_holdcnt == 0, vp, ("Non-zero hold count"));
VNASSERT(vp->v_usecount == 0, vp, ("Non-zero use count"));
VNASSERT(vp->v_writecount == 0, vp, ("Non-zero write count"));
VNASSERT(bo->bo_numoutput == 0, vp, ("Clean vnode has pending I/O's"));
VNASSERT(bo->bo_clean.bv_cnt == 0, vp, ("cleanbufcnt not 0"));
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
VNASSERT(pctrie_is_empty(&bo->bo_clean.bv_root), vp,
("clean blk trie not empty"));
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
VNASSERT(bo->bo_dirty.bv_cnt == 0, vp, ("dirtybufcnt not 0"));
- Add a new general purpose path-compressed radix trie which can be used with any structure containing a uint64_t index. The tree code auto-generates type safe wrappers. - Eliminate the buf splay and replace it with pctrie. This is not only significantly faster with large files but also allows for the possibility of shared locking. Reviewed by: alc, attilio Sponsored by: EMC / Isilon Storage Division
2013-05-12 04:05:01 +00:00
VNASSERT(pctrie_is_empty(&bo->bo_dirty.bv_root), vp,
("dirty blk trie not empty"));
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
VNASSERT(TAILQ_EMPTY(&vp->v_cache_dst), vp, ("vp has namecache dst"));
VNASSERT(LIST_EMPTY(&vp->v_cache_src), vp, ("vp has namecache src"));
VNASSERT(vp->v_cache_dd == NULL, vp, ("vp has namecache for .."));
We need to zero out the clustering variables in a freed vnode structure. For completeness add a VNASSERT that there are no threads waiting on a range lock (this was previously checked on every vnode free). Reported by; Rick Macklem Fix from: Mateusz Guzik PR: 204949
2015-12-04 03:54:18 +00:00
VNASSERT(TAILQ_EMPTY(&vp->v_rl.rl_waiters), vp,
("Dangling rangelock waiters"));
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
VI_UNLOCK(vp);
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
#ifdef MAC
mac_vnode_destroy(vp);
#endif
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
if (vp->v_pollinfo != NULL) {
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
destroy_vpollinfo(vp->v_pollinfo);
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_pollinfo = NULL;
}
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
#ifdef INVARIANTS
/* XXX Elsewhere we detect an already freed vnode via NULL v_op. */
vp->v_op = NULL;
#endif
For UNIX sockets make vnode point not to the socket, but to the UNIX PCB, since the latter is the thing that links together VFS and sockets. While here, make the union in the struct vnode anonymous.
2017-06-02 17:31:25 +00:00
vp->v_mountedhere = NULL;
vp->v_unpcb = NULL;
vp->v_rdev = NULL;
vp->v_fifoinfo = NULL;
We need to zero out the clustering variables in a freed vnode structure. For completeness add a VNASSERT that there are no threads waiting on a range lock (this was previously checked on every vnode free). Reported by; Rick Macklem Fix from: Mateusz Guzik PR: 204949
2015-12-04 03:54:18 +00:00
vp->v_lasta = vp->v_clen = vp->v_cstart = vp->v_lastw = 0;
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_iflag = 0;
vp->v_vflag = 0;
bo->bo_flag = 0;
Drop export of vdestroy() function from kern/vfs_subr.c as it is used only as a helper function in that file. Replace sole call to vbusy() with inline code in vholdl(). Replace sole calls to vfree() and vdestroy() with inline code in vdropl(). The Clang compiler already inlines these functions, so they do not show up in a kernel backtrace which is confusing. Also you cannot set their frame in kgdb which means that it is impossible to view their local variables. So, while the produced code is unchanged, the debugging should be easier. Discussed with: kib MFC after: 2 weeks
2012-04-17 21:46:59 +00:00
uma_zfree(vnode_zone, vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
/*
* Call VOP_INACTIVE on the vnode and manage the DOINGINACT and OWEINACT
* flags. DOINGINACT prevents us from recursing in calls to vinactive.
* OWEINACT tracks whether a vnode missed a call to inactive due to a
* failed lock upgrade.
*/
Export vinactive() from kern/vfs_subr.c (e.g., make it no longer static and declare its prototype in sys/vnode.h) so that it can be called from process_deferred_inactive() (in ufs/ffs/ffs_snapshot.c) instead of the body of vinactive() being cut and pasted into process_deferred_inactive(). Reviewed by: kib MFC after: 2 weeks
2012-04-11 23:01:11 +00:00
void
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vinactive(struct vnode *vp, struct thread *td)
{
This update uses the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point to replace MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync routines. The vfs_msync routine is run every 30 seconds for every writably mounted filesystem. It ensures that any files mmap'ed from the filesystem with modified pages have those pages queued to be written back to the file from which they are mapped. The ffs_lazy_sync and qsync routines are run every 30 seconds for every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine ensures that any files that have been accessed in the previous 30 seconds have had their access times queued for updating in the filesystem. The qsync routine ensures that any files with modified quotas have those quotas queued to be written back to their associated quota file. In a system configured with 250,000 vnodes, less than 1000 are typically active at any point in time. Prior to this change all 250,000 vnodes would be locked and inspected twice every minute by the syncer. For UFS/FFS filesystems they would be locked and inspected six times every minute (twice by each of these three routines since each of these routines does its own pass over the vnodes associated with a mount point). With this change the syncer now locks and inspects only the tiny set of vnodes that are active. Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 07:00:28 +00:00
struct vm_object *obj;
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
Assert for exclusive vnode lock in vinactive(), vrecycle() and vgonel() functions. Reviewed by: kib
2008-07-27 11:48:15 +00:00
ASSERT_VOP_ELOCKED(vp, "vinactive");
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
ASSERT_VI_LOCKED(vp, "vinactive");
VNASSERT((vp->v_iflag & VI_DOINGINACT) == 0, vp,
("vinactive: recursed on VI_DOINGINACT"));
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vp->v_iflag |= VI_DOINGINACT;
- Clear OWEINACT prior to calling VOP_INACTIVE to remove the possibility of a vget causing another call to INACTIVE before we're finished.
2005-06-07 22:05:32 +00:00
vp->v_iflag &= ~VI_OWEINACT;
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
VI_UNLOCK(vp);
This update uses the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point to replace MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync routines. The vfs_msync routine is run every 30 seconds for every writably mounted filesystem. It ensures that any files mmap'ed from the filesystem with modified pages have those pages queued to be written back to the file from which they are mapped. The ffs_lazy_sync and qsync routines are run every 30 seconds for every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine ensures that any files that have been accessed in the previous 30 seconds have had their access times queued for updating in the filesystem. The qsync routine ensures that any files with modified quotas have those quotas queued to be written back to their associated quota file. In a system configured with 250,000 vnodes, less than 1000 are typically active at any point in time. Prior to this change all 250,000 vnodes would be locked and inspected twice every minute by the syncer. For UFS/FFS filesystems they would be locked and inspected six times every minute (twice by each of these three routines since each of these routines does its own pass over the vnodes associated with a mount point). With this change the syncer now locks and inspects only the tiny set of vnodes that are active. Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 07:00:28 +00:00
/*
* Before moving off the active list, we must be sure that any
Move the comment about resident pages preventing vnode from leaving active list, into the header comment for vdrop(), which is the function that decides whether to leave the vnode on the list. Note that dirty page write-out in vinactive() is asynchronous. Discussed with: alc Sponsored by: The FreeBSD Foundation MFC after: 1 week
2015-11-27 01:16:35 +00:00
* modified pages are converted into the vnode's dirty
* buffers, since these will no longer be checked once the
* vnode is on the inactive list.
*
* The write-out of the dirty pages is asynchronous. At the
* point that VOP_INACTIVE() is called, there could still be
* pending I/O and dirty pages in the object.
This update uses the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point to replace MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync routines. The vfs_msync routine is run every 30 seconds for every writably mounted filesystem. It ensures that any files mmap'ed from the filesystem with modified pages have those pages queued to be written back to the file from which they are mapped. The ffs_lazy_sync and qsync routines are run every 30 seconds for every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine ensures that any files that have been accessed in the previous 30 seconds have had their access times queued for updating in the filesystem. The qsync routine ensures that any files with modified quotas have those quotas queued to be written back to their associated quota file. In a system configured with 250,000 vnodes, less than 1000 are typically active at any point in time. Prior to this change all 250,000 vnodes would be locked and inspected twice every minute by the syncer. For UFS/FFS filesystems they would be locked and inspected six times every minute (twice by each of these three routines since each of these routines does its own pass over the vnodes associated with a mount point). With this change the syncer now locks and inspects only the tiny set of vnodes that are active. Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 07:00:28 +00:00
*/
For unlinked files, do not msync(2) or sync on the vnode deactivation. One consequence of the patch is that msyncing unlinked file mappings no longer reduces the amount of the dirty memory in the system, but I do not think that there are users of msync(2) that utilize it for such side-effect. Reported and tested by: tjil PR: 222356 Reviewed by: alc Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential revision: https://reviews.freebsd.org/D12411
2017-09-19 16:46:37 +00:00
if ((obj = vp->v_object) != NULL && (vp->v_vflag & VV_NOSYNC) == 0 &&
(obj->flags & OBJ_MIGHTBEDIRTY) != 0) {
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
Launder VPO_NOSYNC pages upon vnode deactivation. As of r234483, vnode deactivation causes non-VPO_NOSYNC pages to be laundered. This behaviour has two problems: 1. Dirty VPO_NOSYNC pages must be laundered before the vnode can be reclaimed, and this work may be unfairly deferred to the vnlru process or an unrelated application when the system is under vnode pressure. 2. Deactivation of a vnode with dirty VPO_NOSYNC pages requires a scan of the corresponding VM object's memq for non-VPO_NOSYNC dirty pages; if the laundry thread needs to launder pages from an unreferenced such vnode, it will reactivate and deactivate the vnode with each laundering, potentially resulting in a large number of expensive scans. Therefore, ensure that all dirty pages are laundered upon deactivation, i.e., when all maps of the vnode are removed and all references are released. Reviewed by: alc, kib MFC after: 1 month Differential Revision: https://reviews.freebsd.org/D8641
2016-11-26 21:00:27 +00:00
vm_object_page_clean(obj, 0, 0, 0);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
This update uses the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point to replace MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync routines. The vfs_msync routine is run every 30 seconds for every writably mounted filesystem. It ensures that any files mmap'ed from the filesystem with modified pages have those pages queued to be written back to the file from which they are mapped. The ffs_lazy_sync and qsync routines are run every 30 seconds for every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine ensures that any files that have been accessed in the previous 30 seconds have had their access times queued for updating in the filesystem. The qsync routine ensures that any files with modified quotas have those quotas queued to be written back to their associated quota file. In a system configured with 250,000 vnodes, less than 1000 are typically active at any point in time. Prior to this change all 250,000 vnodes would be locked and inspected twice every minute by the syncer. For UFS/FFS filesystems they would be locked and inspected six times every minute (twice by each of these three routines since each of these routines does its own pass over the vnodes associated with a mount point). With this change the syncer now locks and inspects only the tiny set of vnodes that are active. Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 07:00:28 +00:00
}
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
VOP_INACTIVE(vp, td);
VI_LOCK(vp);
VNASSERT(vp->v_iflag & VI_DOINGINACT, vp,
("vinactive: lost VI_DOINGINACT"));
- Clear OWEINACT prior to calling VOP_INACTIVE to remove the possibility of a vget causing another call to INACTIVE before we're finished.
2005-06-07 22:05:32 +00:00
vp->v_iflag &= ~VI_DOINGINACT;
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Remove any vnodes in the vnode table belonging to mount point mp.
*
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
* If FORCECLOSE is not specified, there should not be any active ones,
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* return error if any are found (nb: this is a user error, not a
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
* system error). If FORCECLOSE is specified, detach any active vnodes
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
* that are found.
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
*
* If WRITECLOSE is set, only flush out regular file vnodes open for
* writing.
*
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
* SKIPSYSTEM causes any vnodes marked VV_SYSTEM to be skipped.
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
*
* `rootrefs' specifies the base reference count for the root vnode
* of this filesystem. The root vnode is considered busy if its
Make VFS_ROOT() and vflush() take a thread argument. This is to allow filesystems to decide based on the passed thread which vnode to return. Several filesystems used curthread, they now use the passed thread.
2004-07-12 08:14:09 +00:00
* v_usecount exceeds this value. On a successful return, vflush(, td)
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
* will call vrele() on the root vnode exactly rootrefs times.
* If the SKIPSYSTEM or WRITECLOSE flags are specified, rootrefs must
* be zero.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
#ifdef DIAGNOSTIC
Staticize. Unstaticize a function in scsi/scsi_base that was used, with an undocumented option. My last count on the LINT kernel shows: Total symbols: 3647 unref symbols: 463 undef symbols: 4 1 ref symbols: 1751 2 ref symbols: 485 Approaching the pain threshold now.
1995-12-17 21:23:44 +00:00
static int busyprt = 0; /* print out busy vnodes */
Add descriptions to some more sysctls. PR: kern/148510 MFC after: 1 week
2010-11-14 07:38:42 +00:00
SYSCTL_INT(_debug, OID_AUTO, busyprt, CTLFLAG_RW, &busyprt, 0, "Print out busy vnodes");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
Fix some whitespace nits.
2010-04-03 11:19:20 +00:00
vflush(struct mount *mp, int rootrefs, int flags, struct thread *td)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
struct vnode *vp, *mvp, *rootvp = NULL;
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
struct vattr vattr;
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
int busy = 0, error;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR4(KTR_VFS, "%s: mp %p with rootrefs %d and flags %d", __func__, mp,
rootrefs, flags);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
if (rootrefs > 0) {
KASSERT((flags & (SKIPSYSTEM | WRITECLOSE)) == 0,
("vflush: bad args"));
/*
* Get the filesystem root vnode. We can vput() it
* immediately, since with rootrefs > 0, it won't go away.
*/
Remove the thread argument from the FSD (File-System Dependent) parts of the VFS. Now all the VFS_* functions and relating parts don't want the context as long as it always refers to curthread. In some points, in particular when dealing with VOPs and functions living in the same namespace (eg. vflush) which still need to be converted, pass curthread explicitly in order to retain the old behaviour. Such loose ends will be fixed ASAP. While here fix a bug: now, UFS_EXTATTR can be compiled alone without the UFS_EXTATTR_AUTOSTART option. VFS KPI is heavilly changed by this commit so thirdy parts modules needs to be recompiled. Bump __FreeBSD_version in order to signal such situation.
2009-05-11 15:33:26 +00:00
if ((error = VFS_ROOT(mp, LK_EXCLUSIVE, &rootvp)) != 0) {
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vfs_root lookup failed with %d",
__func__, error);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
return (error);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
}
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
vput(rootvp);
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
loop:
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL(vp, mp, mvp) {
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vholdl(vp);
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
error = vn_lock(vp, LK_INTERLOCK | LK_EXCLUSIVE);
- Fix an XXX. Check the error of vn_lock() in vflush(). Don't specify LK_RETRY either, we don't want this vnode if it turns into another. - Remove the code that checks the mount point after acquiring the lock we are guaranteed to either fail or get the vnode that we wanted.
2003-10-05 07:12:38 +00:00
if (error) {
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdrop(vp);
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL_ABORT(mp, mvp);
Detect that a vnode has been reclaimed while vflush() was waiting to lock the vnode and restart the loop. Vflush() is vulnerable since it does not hold a reference to the vnode and it holds no other locks while waiting for the vnode lock. The vnode will no longer be on the list when the loop is restarted. Approved by: re (rwatson)
2003-05-16 19:46:51 +00:00
goto loop;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
* Skip over a vnodes marked VV_SYSTEM.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if ((flags & SKIPSYSTEM) && (vp->v_vflag & VV_SYSTEM)) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdrop(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
When downgrading a filesystem from read-write to read-only, operations involving file removal or file update were not always being fully committed to disk. The result was lost files or corrupted file data. This change ensures that the filesystem is properly synced to disk before the filesystem is down-graded. This delta also fixes a long standing bug in which a file open for reading has been unlinked. When the last open reference to the file is closed, the inode is reclaimed by the filesystem. Previously, if the filesystem had been down-graded to read-only, the inode could not be reclaimed, and thus was lost and had to be later recovered by fsck. With this change, such files are found at the time of the down-grade. Normally they will result in the filesystem down-grade failing with `device busy'. If a forcible down-grade is done, then the affected files will be revoked causing the inode to be released and the open file descriptors to begin failing on attempts to read. Submitted by: "Sam Leffler" <sam@errno.com>
2002-01-15 07:17:12 +00:00
* If WRITECLOSE is set, flush out unlinked but still open
* files (even if open only for reading) and regular file
Gratuitous whitespace cleanup.
2002-06-06 15:46:38 +00:00
* vnodes open for writing.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
if (flags & WRITECLOSE) {
When doing vflush(WRITECLOSE), clean vnode pages. Unmounts do vfs_msync() before calling VFS_UNMOUNT(), but there is still a race allowing a process to dirty pages after msync finished. Remounts rw->ro just left dirty pages in system. Reviewed by: alc, tegge (long time ago) Tested by: pho MFC after: 2 weeks
2012-01-25 20:54:09 +00:00
if (vp->v_object != NULL) {
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(vp->v_object);
When doing vflush(WRITECLOSE), clean vnode pages. Unmounts do vfs_msync() before calling VFS_UNMOUNT(), but there is still a race allowing a process to dirty pages after msync finished. Remounts rw->ro just left dirty pages in system. Reviewed by: alc, tegge (long time ago) Tested by: pho MFC after: 2 weeks
2012-01-25 20:54:09 +00:00
vm_object_page_clean(vp->v_object, 0, 0, 0);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(vp->v_object);
When doing vflush(WRITECLOSE), clean vnode pages. Unmounts do vfs_msync() before calling VFS_UNMOUNT(), but there is still a race allowing a process to dirty pages after msync finished. Remounts rw->ro just left dirty pages in system. Reviewed by: alc, tegge (long time ago) Tested by: pho MFC after: 2 weeks
2012-01-25 20:54:09 +00:00
}
error = VOP_FSYNC(vp, MNT_WAIT, td);
if (error != 0) {
VOP_UNLOCK(vp, 0);
vdrop(vp);
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_VNODE_FOREACH_ALL_ABORT(mp, mvp);
When doing vflush(WRITECLOSE), clean vnode pages. Unmounts do vfs_msync() before calling VFS_UNMOUNT(), but there is still a race allowing a process to dirty pages after msync finished. Remounts rw->ro just left dirty pages in system. Reviewed by: alc, tegge (long time ago) Tested by: pho MFC after: 2 weeks
2012-01-25 20:54:09 +00:00
return (error);
}
Decontextualize the couplet VOP_GETATTR / VOP_SETATTR as the passed thread was always curthread and totally unuseful. Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-08-28 15:23:18 +00:00
error = VOP_GETATTR(vp, &vattr, td->td_ucred);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
VI_LOCK(vp);
- Fix interlock handling in vn_lock(). Previously, vn_lock() could return with interlock held in error conditions when the caller did not specify LK_INTERLOCK. - Add several comments to vn_lock() describing the rational behind the code flow since it was not immediately obvious.
2002-08-22 06:51:06 +00:00
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
if ((vp->v_type == VNON ||
(error == 0 && vattr.va_nlink > 0)) &&
(vp->v_writecount == 0 || vp->v_type != VREG)) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdropl(vp);
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
continue;
}
} else
VI_LOCK(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
* With v_usecount == 0, all we need to do is clear out the
* vnode data structures and we are done.
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
*
* If FORCECLOSE is set, forcibly close the vnode.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
if (vp->v_usecount == 0 || (flags & FORCECLOSE)) {
vgonel(vp);
} else {
busy++;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#ifdef DIAGNOSTIC
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
if (busyprt)
Replace all remaining calls to vprint(9) with vn_printf(9), and remove the old macro. MFC after: 1 month
2016-08-10 16:12:31 +00:00
vn_printf(vp, "vflush: busy vnode ");
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
#endif
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
}
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vdropl(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
if (rootrefs > 0 && (flags & FORCECLOSE) == 0) {
/*
* If just the root vnode is busy, and if its refcount
* is equal to `rootrefs', then go ahead and kill it.
*/
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
VI_LOCK(rootvp);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
KASSERT(busy > 0, ("vflush: not busy"));
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT(rootvp->v_usecount >= rootrefs, rootvp,
Dump the actual bad values when this assertion is tripped.
2004-07-12 04:13:38 +00:00
("vflush: usecount %d < rootrefs %d",
rootvp->v_usecount, rootrefs));
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
if (busy == 1 && rootvp->v_usecount == rootrefs) {
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_LOCK(rootvp, LK_EXCLUSIVE|LK_INTERLOCK);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vgone(rootvp);
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(rootvp, 0);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
busy = 0;
} else
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
VI_UNLOCK(rootvp);
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
}
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
if (busy) {
CTR2(KTR_VFS, "%s: failing as %d vnodes are busy", __func__,
busy);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (EBUSY);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
}
Change the second argument of vflush() to an integer that specifies the number of references on the filesystem root vnode to be both expected and released. Many filesystems hold an extra reference on the filesystem root vnode, which must be accounted for when determining if the filesystem is busy and then released if it isn't busy. The old `skipvp' approach required individual filesystem xxx_unmount functions to re-implement much of vflush()'s logic to deal with the root vnode. All 9 filesystems that hold an extra reference on the root vnode got the logic wrong in the case of forced unmounts, so `umount -f' would always fail if there were any extra root vnode references. Fix this issue centrally in vflush(), now that we can. This commit also fixes a vnode reference leak in devfs, which could result in idle devfs filesystems that refuse to unmount. Reviewed by: phk, bp
2001-05-16 18:04:37 +00:00
for (; rootrefs > 0; rootrefs--)
vrele(rootvp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (0);
}
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
/*
* Recycle an unused vnode to the front of the free list.
*/
int
Remove unused thread argument to vrecycle(). Reviewed by: kib
2012-04-23 14:10:34 +00:00
vrecycle(struct vnode *vp)
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
{
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
int recycled;
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
Add vrecyclel() to vrecycle() a vnode with the interlock already held. Obtained from: OneFS Sponsored by: Dell EMC Isilon MFC after: 2 weeks
2016-10-06 18:09:22 +00:00
VI_LOCK(vp);
recycled = vrecyclel(vp);
VI_UNLOCK(vp);
return (recycled);
}
/*
* vrecycle, with the vp interlock held.
*/
int
vrecyclel(struct vnode *vp)
{
int recycled;
ASSERT_VOP_ELOCKED(vp, __func__);
ASSERT_VI_LOCKED(vp, __func__);
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
recycled = 0;
if (vp->v_usecount == 0) {
recycled = 1;
vgonel(vp);
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
}
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
return (recycled);
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
}
- Move the xlock 'locking' code into vx_lock() and vx_unlock(). - Create a new function, vgonechrl(), which performs vgone for an in-use character device. Move the code from vflush() that did this into vgonechrl(). - Hold the xlock across the entirety of vgonel() and vgonechrl() so that at no point will an invalid vnode exist on any list without XLOCK set. - Move the xlock code out of vclean() now that it is in the vgone*() functions.
2003-10-05 00:02:41 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
* Eliminate all activity associated with a vnode
* in preparation for reuse.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
void
vgone(struct vnode *vp)
{
VI_LOCK(vp);
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vgonel(vp);
VI_UNLOCK(vp);
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
}
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
static void
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
notify_lowervp_vfs_dummy(struct mount *mp __unused,
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
struct vnode *lowervp __unused)
{
}
/*
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
* Notify upper mounts about reclaimed or unlinked vnode.
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
*/
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
void
vfs_notify_upper(struct vnode *vp, int event)
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
{
static struct vfsops vgonel_vfsops = {
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
.vfs_reclaim_lowervp = notify_lowervp_vfs_dummy,
.vfs_unlink_lowervp = notify_lowervp_vfs_dummy,
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
};
struct mount *mp, *ump, *mmp;
mp = vp->v_mount;
if (mp == NULL)
return;
MNT_ILOCK(mp);
if (TAILQ_EMPTY(&mp->mnt_uppers))
goto unlock;
MNT_IUNLOCK(mp);
mmp = malloc(sizeof(struct mount), M_TEMP, M_WAITOK | M_ZERO);
mmp->mnt_op = &vgonel_vfsops;
mmp->mnt_kern_flag |= MNTK_MARKER;
MNT_ILOCK(mp);
mp->mnt_kern_flag |= MNTK_VGONE_UPPER;
for (ump = TAILQ_FIRST(&mp->mnt_uppers); ump != NULL;) {
if ((ump->mnt_kern_flag & MNTK_MARKER) != 0) {
ump = TAILQ_NEXT(ump, mnt_upper_link);
continue;
}
TAILQ_INSERT_AFTER(&mp->mnt_uppers, ump, mmp, mnt_upper_link);
MNT_IUNLOCK(mp);
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
switch (event) {
case VFS_NOTIFY_UPPER_RECLAIM:
VFS_RECLAIM_LOWERVP(ump, vp);
break;
case VFS_NOTIFY_UPPER_UNLINK:
VFS_UNLINK_LOWERVP(ump, vp);
break;
default:
KASSERT(0, ("invalid event %d", event));
break;
}
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
MNT_ILOCK(mp);
ump = TAILQ_NEXT(mmp, mnt_upper_link);
TAILQ_REMOVE(&mp->mnt_uppers, mmp, mnt_upper_link);
}
free(mmp, M_TEMP);
mp->mnt_kern_flag &= ~MNTK_VGONE_UPPER;
if ((mp->mnt_kern_flag & MNTK_VGONE_WAITER) != 0) {
mp->mnt_kern_flag &= ~MNTK_VGONE_WAITER;
wakeup(&mp->mnt_uppers);
}
unlock:
MNT_IUNLOCK(mp);
}
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
/*
* vgone, with the vp interlock held.
*/
Mark vgonel() as static. It was already declared static earlier; no idea why compilers don't warn about this. MFC after: 1 month Sponsored by: The FreeBSD Foundation
2015-08-04 08:51:56 +00:00
static void
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
vgonel(struct vnode *vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
- Don't make vgonel() globally visible, we want to change its prototype anyway and it's not used outside of vfs_subr.c. - Change vgonel() to accept a parameter which determines whether or not we'll put the vnode on the free list when we're done. - Use the new vgonel() parameter rather than VI_DOOMED to signal our intentions in vtryrecycle(). - In vgonel() return if VI_DOOMED is already set, this vnode has already been reclaimed. Sponsored by: Isilon Systems, Inc.
2005-06-13 06:26:55 +00:00
struct thread *td;
- Dont clear OWEINACT in vbusy(), we still owe an inactive call if someone vhold()s us. - Avoid an extra mutex acquire and release in the common case of vgonel() by checking for OWEINACT at the start of the function. - Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our shared lock if it fails. Sponsored by: Isilon Systems, Inc.
2005-03-29 10:02:48 +00:00
int oweinact;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
int active;
Use vn_start_secondary_write() and vn_finished_secondary_write() as a replacement for vn_write_suspend_wait() to better account for secondary write processing. Close race where secondary writes could be started after ffs_sync() returned but before the file system was marked as suspended. Detect if secondary writes or softdep processing occurred during vnode sync loop in ffs_sync() and retry the loop if needed.
2006-03-08 23:43:39 +00:00
struct mount *mp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Assert for exclusive vnode lock in vinactive(), vrecycle() and vgonel() functions. Reviewed by: kib
2008-07-27 11:48:15 +00:00
ASSERT_VOP_ELOCKED(vp, "vgonel");
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
ASSERT_VI_LOCKED(vp, "vgonel");
- Change holdcnt use around vnode recycling. We now always keep a holdcnt ref while we're calling vgone(). This prevents transient refs from re-adding us to the free list. Previously, a vfree() triggered via vinvalbuf() getting rid of all of a vnode's pages could place a partially destructed vnode on the free list where vtryrecycle() could find it. The first call to vtryrecycle would hang up on the vnode lock, but when it failed it would place a now dead vnode onto the free list, and another call to vtryrecycle() would free an already free vnode. There were many complications of having a zero ref count while freeing which can now go away. - Change vdropl() to release the interlock before returning. All callers now respect this, so vdropl() directly frees VI_DOOMED vnodes once the last ref is dropped. This means that we'll never have VI_DOOMED vnodes on the free list. - Seperate v_incr_usecount() into v_incr_usecount(), v_decr_usecount() and v_decr_useonly(). The incr/decr split is so that incr usecount can return with the interlock still held while decr drops the interlock so it can call vdropl() which will potentially free the vnode. The calling function can't drop the lock of an already free'd node. v_decr_useonly() drops a usecount without droping the hold count. This is done so the usecount reaches zero in vput() before we recycle, however the holdcount is still 1 which prevents any new references from placing the vnode back on the free list. - Fix vnlrureclaim() to vhold the vnode since it doesn't do a vget(). We wouldn't want vnlrureclaim() to bump the usecount since this has different semantics. Also change vnlrureclaim() to do a NOWAIT on the vn_lock. When this function runs we're usually in a desperate situation and we wouldn't want to wait for any specific vnode to be released. - Fix a bunch of misc comments to reflect the new behavior. - Add vhold() and vdrop() to vflush() for the same reasons that we do in vlrureclaim(). Previously we held no reference and a vnode could have been freed while we were waiting on the lock. - Get rid of vlruvp() and vfreehead(). Neither are used. vlruvp() should really be rethought before it's reintroduced. - vgonel() always returns with the vnode locked now and never puts the vnode back on a free list. The vnode will be freed as soon as the last reference is released. Sponsored by: Isilon Systems, Inc. Debugging help from: Kris Kennaway, Peter Holm Approved by: re (blanket vfs)
2005-06-16 04:41:42 +00:00
VNASSERT(vp->v_holdcnt, vp,
("vgonel: vp %p has no reference.", vp));
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: vp %p", __func__, vp);
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
td = curthread;
Integrate vclean() into vgonel(). Various associated polishing.
2005-01-28 13:00:03 +00:00
- Don't make vgonel() globally visible, we want to change its prototype anyway and it's not used outside of vfs_subr.c. - Change vgonel() to accept a parameter which determines whether or not we'll put the vnode on the free list when we're done. - Use the new vgonel() parameter rather than VI_DOOMED to signal our intentions in vtryrecycle(). - In vgonel() return if VI_DOOMED is already set, this vnode has already been reclaimed. Sponsored by: Isilon Systems, Inc.
2005-06-13 06:26:55 +00:00
/*
* Don't vgonel if we're already doomed.
*/
Do not drop the vnode interlock if vdropl is called on already doomed vnode. vdropl callers expect it to return with interlock still being held. MFC after: 2 days
2005-08-10 11:46:03 +00:00
if (vp->v_iflag & VI_DOOMED)
- Don't make vgonel() globally visible, we want to change its prototype anyway and it's not used outside of vfs_subr.c. - Change vgonel() to accept a parameter which determines whether or not we'll put the vnode on the free list when we're done. - Use the new vgonel() parameter rather than VI_DOOMED to signal our intentions in vtryrecycle(). - In vgonel() return if VI_DOOMED is already set, this vnode has already been reclaimed. Sponsored by: Isilon Systems, Inc.
2005-06-13 06:26:55 +00:00
return;
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
vp->v_iflag |= VI_DOOMED;
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
* Check to see if the vnode is in use. If so, we have to call
* VOP_CLOSE() and VOP_INACTIVE().
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
active = vp->v_usecount;
- Dont clear OWEINACT in vbusy(), we still owe an inactive call if someone vhold()s us. - Avoid an extra mutex acquire and release in the common case of vgonel() by checking for OWEINACT at the start of the function. - Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our shared lock if it fails. Sponsored by: Isilon Systems, Inc.
2005-03-29 10:02:48 +00:00
oweinact = (vp->v_iflag & VI_OWEINACT);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
VI_UNLOCK(vp);
- Fix nullfs vnode reference leak in nullfs_reclaim_lowervp(). The null_hashget() obtains the reference on the nullfs vnode, which must be dropped. - Fix a wart which existed from the introduction of the nullfs caching, do not unlock lower vnode in the nullfs_reclaim_lowervp(). It should be innocent, but now it is also formally safe. Inform the nullfs_reclaim() about this using the NULLV_NOUNLOCK flag set on nullfs inode. - Add a callback to the upper filesystems for the lower vnode unlinking. When inactivating a nullfs vnode, check if the lower vnode was unlinked, indicated by nullfs flag NULLV_DROP or VV_NOSYNC on the lower vnode, and reclaim upper vnode if so. This allows nullfs to purge cached vnodes for the unlinked lower vnode, avoiding excessive caching. Reported by: G??ran L??wkrantz <goran.lowkrantz@ismobile.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-05-11 11:17:44 +00:00
vfs_notify_upper(vp, VFS_NOTIFY_UPPER_RECLAIM);
Add a facility for vgone() to inform the set of subscribed mounts about vnode reclamation. Typical use is for the bypass mounts like nullfs to get a notification about lower vnode going away. Now, vgone() calls new VFS op vfs_reclaim_lowervp() with an argument lowervp which is reclaimed. It is possible to register several reclamation event listeners, to correctly handle the case of several nullfs mounts over the same directory. For the filesystem not having nullfs mounts over it, the overhead added is a single mount interlock lock/unlock in the vnode reclamation path. In collaboration with: pho MFC after: 3 weeks
2012-09-09 19:17:15 +00:00
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
* If purging an active vnode, it must be closed and
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
* deactivated before being reclaimed.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- Dont clear OWEINACT in vbusy(), we still owe an inactive call if someone vhold()s us. - Avoid an extra mutex acquire and release in the common case of vgonel() by checking for OWEINACT at the start of the function. - Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our shared lock if it fails. Sponsored by: Isilon Systems, Inc.
2005-03-29 10:02:48 +00:00
if (active)
Eliminate the constant flags argument to vclean()
2005-01-24 22:22:02 +00:00
VOP_CLOSE(vp, FNONBLOCK, NOCRED, td);
- Dont clear OWEINACT in vbusy(), we still owe an inactive call if someone vhold()s us. - Avoid an extra mutex acquire and release in the common case of vgonel() by checking for OWEINACT at the start of the function. - Fix the case where we set OWEINACT in vput(). LK_EXCLUPGRADE drops our shared lock if it fails. Sponsored by: Isilon Systems, Inc.
2005-03-29 10:02:48 +00:00
if (oweinact || active) {
Add a new vnode flag VI_DOINGINACT to indicate that a VOP_INACTIVE call is in progress on the vnode. When vput() or vrele() sees a 1->0 reference count transition, it now return without any further action if this flag is set. This flag is necessary to avoid recursion into VOP_INACTIVE if the filesystem inactive routine causes the reference count to increase and then drop back to zero. It is also used to guarantee that an unlocked vnode will not be recycled while blocked in VOP_INACTIVE(). There are at least two cases where the recursion can occur: one is that the softupdates code called by ufs_inactive() via ffs_truncate() can call vput() on the vnode. This has been reported by many people as "lockmgr: draining against myself" panics. The other case is that nfs_inactive() can call vget() and then vrele() on the vnode to clean up a sillyrename file. Reviewed by: mckusick (an older version of the patch)
2002-12-29 18:30:49 +00:00
VI_LOCK(vp);
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
if ((vp->v_iflag & VI_DOINGINACT) == 0)
vinactive(vp, td);
Add a new vnode flag VI_DOINGINACT to indicate that a VOP_INACTIVE call is in progress on the vnode. When vput() or vrele() sees a 1->0 reference count transition, it now return without any further action if this flag is set. This flag is necessary to avoid recursion into VOP_INACTIVE if the filesystem inactive routine causes the reference count to increase and then drop back to zero. It is also used to guarantee that an unlocked vnode will not be recycled while blocked in VOP_INACTIVE(). There are at least two cases where the recursion can occur: one is that the softupdates code called by ufs_inactive() via ffs_truncate() can call vput() on the vnode. This has been reported by many people as "lockmgr: draining against myself" panics. The other case is that nfs_inactive() can call vget() and then vrele() on the vnode to clean up a sillyrename file. Reviewed by: mckusick (an older version of the patch)
2002-12-29 18:30:49 +00:00
VI_UNLOCK(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
When detaching an unix domain socket, uipc_detach() checks unp->unp_vnode pointer to detect if there is a vnode associated with (binded to) this socket and does necessary cleanup if there is. The issue is that after forced unmount this check may be too late as the unp_vnode is reclaimed and the reference is stale. To fix this provide a helper function that is called on a socket vnode reclamation to do necessary cleanup. Pointed by: kib Reviewed by: kib MFC after: 2 weeks
2012-02-25 10:15:41 +00:00
if (vp->v_type == VSOCK)
vfs_unp_reclaim(vp);
The vinactive() call in vgonel() may start writes for the dirty pages, creating delayed write buffers belonging to the reclaimed vnode. Put the buffer cleanup code after inactivation. Add asserts that ensure that buffer queues are empty and add BO_DEAD flag for bufobj to check that no buffers are added after the cleanup. BO_DEAD is only used by INVARIANTS-enabled kernels. Reported and tested by: pho (previous version) Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-12-13 16:02:37 +00:00
/*
* Clean out any buffers associated with the vnode.
* If the flush fails, just toss the buffers.
*/
mp = NULL;
if (!TAILQ_EMPTY(&vp->v_bufobj.bo_dirty.bv_hd))
(void) vn_start_secondary_write(vp, &mp, V_WAIT);
if (vinvalbuf(vp, V_SAVE, 0, 0) != 0) {
while (vinvalbuf(vp, 0, 0, 0) != 0)
;
}
Do not allow creation of the dirty buffers for the dead buffer objects, i.e. for buffer objects which vnode was reclaimed. Buffer cache cannot write such buffers. Return the error and discard the buffer immediately on write attempt. BO_DIRTY now always set during vnode reclamation, since it is used not only for the INVARIANTS checks. Do allow placement of the clean buffers on dead bufobj list, otherwise filesystems cannot use bufcache at all after the devvp reclaim. Reported and tested by: trasz Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-07-11 11:21:56 +00:00
The vinactive() call in vgonel() may start writes for the dirty pages, creating delayed write buffers belonging to the reclaimed vnode. Put the buffer cleanup code after inactivation. Add asserts that ensure that buffer queues are empty and add BO_DEAD flag for bufobj to check that no buffers are added after the cleanup. BO_DEAD is only used by INVARIANTS-enabled kernels. Reported and tested by: pho (previous version) Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-12-13 16:02:37 +00:00
BO_LOCK(&vp->v_bufobj);
KASSERT(TAILQ_EMPTY(&vp->v_bufobj.bo_dirty.bv_hd) &&
vp->v_bufobj.bo_dirty.bv_cnt == 0 &&
TAILQ_EMPTY(&vp->v_bufobj.bo_clean.bv_hd) &&
vp->v_bufobj.bo_clean.bv_cnt == 0,
("vp %p bufobj not invalidated", vp));
In vgonel(), postpone setting BO_DEAD until VOP_RECLAIM() is called, if vnode is VMIO. For VMIO vnodes, set BO_DEAD in vm_object_terminate(). The vnode_destroy_object(), when calling into vm_object_terminate(), must be able to flush buffers. BO_DEAD purpose is to quickly destroy buffers on write when the underlying vnode is not operable any more (one example is the devfs node after geom is gone). Setting BO_DEAD for reclaiming vnode before object is terminated is premature, and results in unability to flush buffers with live SU dependencies from vinvalbuf() in vm_object_terminate(). Reported by: David Cross <dcrosstech@gmail.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2016-07-11 14:19:09 +00:00
/*
* For VMIO bufobj, BO_DEAD is set in vm_object_terminate()
Fix grammar. Submitted by: alc MFC after: 2 weeks
2016-07-11 17:04:22 +00:00
* after the object's page queue is flushed.
In vgonel(), postpone setting BO_DEAD until VOP_RECLAIM() is called, if vnode is VMIO. For VMIO vnodes, set BO_DEAD in vm_object_terminate(). The vnode_destroy_object(), when calling into vm_object_terminate(), must be able to flush buffers. BO_DEAD purpose is to quickly destroy buffers on write when the underlying vnode is not operable any more (one example is the devfs node after geom is gone). Setting BO_DEAD for reclaiming vnode before object is terminated is premature, and results in unability to flush buffers with live SU dependencies from vinvalbuf() in vm_object_terminate(). Reported by: David Cross <dcrosstech@gmail.com> Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2016-07-11 14:19:09 +00:00
*/
if (vp->v_bufobj.bo_object == NULL)
vp->v_bufobj.bo_flag |= BO_DEAD;
The vinactive() call in vgonel() may start writes for the dirty pages, creating delayed write buffers belonging to the reclaimed vnode. Put the buffer cleanup code after inactivation. Add asserts that ensure that buffer queues are empty and add BO_DEAD flag for bufobj to check that no buffers are added after the cleanup. BO_DEAD is only used by INVARIANTS-enabled kernels. Reported and tested by: pho (previous version) Sponsored by: The FreeBSD Foundation MFC after: 1 week
2014-12-13 16:02:37 +00:00
BO_UNLOCK(&vp->v_bufobj);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Reclaim the vnode.
*/
KSE Milestone 2 Note ALL MODULES MUST BE RECOMPILED make the kernel aware that there are smaller units of scheduling than the process. (but only allow one thread per process at this time). This is functionally equivalent to teh previousl -current except that there is a thread associated with each process. Sorry john! (your next MFC will be a doosie!) Reviewed by: peter@freebsd.org, dillon@freebsd.org X-MFC after: ha ha ha ha
2001-09-12 08:38:13 +00:00
if (VOP_RECLAIM(vp, td))
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
panic("vgone: cannot reclaim");
Use vn_start_secondary_write() and vn_finished_secondary_write() as a replacement for vn_write_suspend_wait() to better account for secondary write processing. Close race where secondary writes could be started after ffs_sync() returned but before the file system was marked as suspended. Detect if secondary writes or softdep processing occurred during vnode sync loop in ffs_sync() and retry the loop if needed.
2006-03-08 23:43:39 +00:00
if (mp != NULL)
vn_finished_secondary_write(mp);
Convert KASSERTS to VNASSERTS
2005-02-17 10:28:58 +00:00
VNASSERT(vp->v_object == NULL, vp,
Don't call VOP_DESTROYVOBJECT(), trust that VOP_RECLAIM() did what was necessary.
2005-02-07 07:48:03 +00:00
("vop_reclaim left v_object vp=%p, tag=%s", vp, vp->v_tag));
Move the head of byte-level advisory lock list from the filesystem-specific vnode data to the struct vnode. Provide the default implementation for the vop_advlock and vop_advlockasync. Purge the locks on the vnode reclaim by using the lf_purgelocks(). The default implementation is augmented for the nfs and smbfs. In the nfs_advlock, push the Giant inside the nfs_dolock. Before the change, the vop_advlock and vop_advlockasync have taken the unlocked vnode and dereferenced the fs-private inode data, racing with with the vnode reclamation due to forced unmount. Now, the vop_getattr under the shared vnode lock is used to obtain the inode size, and later, in the lf_advlockasync, after locking the vnode interlock, the VI_DOOMED flag is checked to prevent an operation on the doomed vnode. The implementation of the lf_purgelocks() is submitted by dfr. Reported by: kris Tested by: kris, pho Discussed with: jeff, dfr MFC after: 2 weeks
2008-04-16 11:33:32 +00:00
/*
* Clear the advisory locks and wake up waiting threads.
*/
Add VOP_ADVLOCKPURGE so that the file system is called when purging locks (in the case where the VFS impl isn't using lf_*) Submitted by: Matthew Fleming <matthew.fleming@isilon.com> Reviewed by: zml, dfr
2010-05-12 21:24:46 +00:00
(void)VOP_ADVLOCKPURGE(vp);
As the kernel allocates and frees vnodes, it fully initializes them on every allocation and fully releases them on every free. These are not trivial costs: it starts by zeroing a large structure then initializes a mutex, a lock manager lock, an rw lock, four lists, and six pointers. And looking at vfs.vnodes_created, these operations are being done millions of times an hour on a busy machine. As a performance optimization, this code update uses the uma_init and uma_fini routines to do these initializations and cleanups only as the vnodes enter and leave the vnode_zone. With this change the initializations are only done kern.maxvnodes times at system startup and then only rarely again. The frees are done only if the vnode_zone shrinks which never happens in practice. For those curious about the avoided work, look at the vnode_init() and vnode_fini() functions in kern/vfs_subr.c to see the code that has been removed from the main vnode allocation/free path. Reviewed by: kib Tested by: Peter Holm
2015-11-29 21:42:26 +00:00
vp->v_lockf = NULL;
- Don't cache_purge() in getnewvnode. It's done in vclean(). With this purge, the purge in vclean, and the filesystems purge, we had 3 purges per vnode. - Move the insmntque(vp, 0) to vclean() so that we may remove it from the two vgone() functions and reduce the number of lock operations required.
2003-10-05 02:48:04 +00:00
/*
* Delete from old mount point vnode list.
*/
When we traverse the vnodes on a mountpoint we need to look out for our cached 'next vnode' being removed from this mountpoint. If we find that it was recycled, we restart our traversal from the start of the list. Code to do that is in all local disk filesystems (and a few other places) and looks roughly like this: MNT_ILOCK(mp); loop: for (vp = TAILQ_FIRST(&mp...); (vp = nvp) != NULL; nvp = TAILQ_NEXT(vp,...)) { if (vp->v_mount != mp) goto loop; MNT_IUNLOCK(mp); ... MNT_ILOCK(mp); } MNT_IUNLOCK(mp); The code which takes vnodes off a mountpoint looks like this: MNT_ILOCK(vp->v_mount); ... TAILQ_REMOVE(&vp->v_mount->mnt_nvnodelist, vp, v_nmntvnodes); ... MNT_IUNLOCK(vp->v_mount); ... vp->v_mount = something; (Take a moment and try to spot the locking error before you read on.) On a SMP system, one CPU could have removed nvp from our mountlist but not yet gotten to assign a new value to vp->v_mount while another CPU simultaneously get to the top of the traversal loop where it finds that (vp->v_mount != mp) is not true despite the fact that the vnode has indeed been removed from our mountpoint. Fix: Introduce the macro MNT_VNODE_FOREACH() to traverse the list of vnodes on a mountpoint while taking into account that vnodes may be removed from the list as we go. This saves approx 65 lines of duplicated code. Split the insmntque() which potentially moves a vnode from one mount point to another into delmntque() and insmntque() which does just what the names say. Fix delmntque() to set vp->v_mount to NULL while holding the mountpoint lock.
2004-07-04 08:52:35 +00:00
delmntque(vp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
cache_purge(vp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
* Done with purge, reset to the standard lock and invalidate
* the vnode.
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
*/
- In reassignbuf() add many asserts to validate the head and tail pointers of the clean and dirty lists. This is in an attempt to catch the wrong bufobj problem sooner. - In vgonel() don't acquire an extra reference in the active case, the vnode lock and VI_DOOMED protect us from recursively cleaning. - Also in vgonel() clean up some stale comments. Sponsored by: Isilon Systems, Inc. Approved by: re (blanket vfs)
2005-06-14 20:31:53 +00:00
VI_LOCK(vp);
Unconditionally reset vp->v_vnlock back to the default in the vclean() function (e.g., vp->v_vnlock = &vp->v_lock) rather than requiring filesystems that use alternate locks to do so in their vop_reclaim functions. This change is a further cleanup of the vop_stdlock interface. Submitted by: Poul-Henning Kamp <phk@critter.freebsd.dk> Sponsored by: DARPA & NAI Labs.
2002-10-14 19:44:51 +00:00
vp->v_vnlock = &vp->v_lock;
Back when VOP_* was introduced, we did not have new-style struct initializations but we did have lofty goals and big ideals. Adjust to more contemporary circumstances and gain type checking. Replace the entire vop_t frobbing thing with properly typed structures. The only casualty is that we can not add a new VOP_ method with a loadable module. History has not given us reason to belive this would ever be feasible in the the first place. Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc. Give coda correct prototypes and function definitions for all vop_()s. Generate a bit more data from the vnode_if.src file: a struct vop_vector and protype typedefs for all vop methods. Add a new vop_bypass() and make vop_default be a pointer to another struct vop_vector. Remove a lot of vfs_init since vop_vector is ready to use from the compiler. Cast various vop_mumble() to void * with uppercase name, for instance VOP_PANIC, VOP_NULL etc. Implement VCALL() by making vdesc_offset the offsetof() the relevant function pointer in vop_vector. This is disgusting but since the code is generated by a script comparatively safe. The alternative for nullfs etc. would be much worse. Fix up all vnode method vectors to remove casts so they become typesafe. (The bulk of this is generated by scripts)
2004-12-01 23:16:38 +00:00
vp->v_op = &dead_vnodeops;
Remove all use of vnode->v_tag, replacing with appropriate substitutes. v_tag is now const char * and should only be used for debugging. Additionally: 1. All users of VT_NTS now check vfsconf->vf_type VFCF_NETWORK 2. The user of VT_PROCFS now checks for the new flag VV_PROCDEP, which is propagated by pseudofs to all child vnodes if the fs sets PFS_PROCDEP. Suggested by: phk Reviewed by: bde, rwatson (earlier version)
2002-09-14 09:02:28 +00:00
vp->v_tag = "none";
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vp->v_type = VBAD;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
/*
* Calculate the total number of references to a special device.
*/
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vcount(struct vnode *vp)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
int count;
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_lock();
Fix the spechash lock order reversal by keeping an updated sum of v_usecount in the dev_t which vcount() can return without locking any vnodes. Seen by: jhb
2002-10-24 19:38:56 +00:00
count = vp->v_rdev->si_usecount;
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_unlock();
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
return (count);
}
Simplify the handling of VCHR and VBLK vnodes using the new dev_t: Make the alias list a SLIST. Drop the "fast recycling" optimization of vnodes (including the returning of a prexisting but stale vnode from checkalias). It doesn't buy us anything now that we don't hardlimit vnodes anymore. Rename checkalias2() and checkalias() to addalias() and addaliasu() - which takes dev_t and udev_t arg respectively. Make the revoke syscalls use vcount() instead of VALIASED. Remove VALIASED flag, we don't need it now and it is faster to traverse the much shorter lists than to maintain the flag. vfs_mountedon() can check the dev_t directly, all the vnodes point to the same one. Print the devicename in specfs/vprint(). Remove a couple of stale LFS vnode flags. Remove unimplemented/unused LK_DRAINED;
1999-08-26 14:53:31 +00:00
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
/*
Do the dreaded s/dev_t/struct cdev */ Bump __FreeBSD_version accordingly.
2004-06-16 09:47:26 +00:00
* Same as above, but using the struct cdev *as argument
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
*/
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
count_dev(struct cdev *dev)
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
{
Simplify count_dev()
2003-10-17 11:56:48 +00:00
int count;
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_lock();
Simplify count_dev()
2003-10-17 11:56:48 +00:00
count = dev->si_usecount;
Do not refcount the cdevsw, but rather maintain a cdev->si_threadcount of the number of threads which are inside whatever is behind the cdevsw for this particular cdev. Make the device mutex visible through dev_lock() and dev_unlock(). We may want finer granularity later. Replace spechash_mtx use with dev_lock()/dev_unlock().
2004-09-23 07:17:41 +00:00
dev_unlock();
Simplify count_dev()
2003-10-17 11:56:48 +00:00
return(count);
Do refcounting of open devices (more) correctly. count_dev funtion by phk.
2000-02-07 23:05:40 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Print out a description of a vnode.
*/
static char *typename[] =
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
{"VNON", "VREG", "VDIR", "VBLK", "VCHR", "VLNK", "VSOCK", "VFIFO", "VBAD",
"VMARKER"};
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
The big 4.4BSD Lite to FreeBSD 2.0.0 (Development) patch. Reviewed by: Rodney W. Grimes Submitted by: John Dyson and David Greenman
1994-05-25 09:21:21 +00:00
void
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
vn_printf(struct vnode *vp, const char *fmt, ...)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
va_list ap;
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
char buf[256], buf2[16];
u_long flags;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
va_start(ap, fmt);
vprintf(fmt, ap);
va_end(ap);
printf("%p: ", (void *)vp);
printf("tag %s, type %s\n", vp->v_tag, typename[vp->v_type]);
One of the vnode fields listed by vn_printf is the union of pointers whose type depends on the type of vnode. Correct vn_printf so that it correctly identifies the name of the pointer that it is printing. Submitted by: Andreas Longwitz <longwitz at incore.de> MFC after: 1 week
2018-01-31 22:49:50 +00:00
printf(" usecount %d, writecount %d, refcount %d",
vp->v_usecount, vp->v_writecount, vp->v_holdcnt);
switch (vp->v_type) {
case VDIR:
printf(" mountedhere %p\n", vp->v_mountedhere);
break;
case VCHR:
printf(" rdev %p\n", vp->v_rdev);
break;
case VSOCK:
printf(" socket %p\n", vp->v_unpcb);
break;
case VFIFO:
printf(" fifoinfo %p\n", vp->v_fifoinfo);
break;
default:
printf("\n");
break;
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
buf[0] = '\0';
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
buf[1] = '\0';
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if (vp->v_vflag & VV_ROOT)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VV_ROOT", sizeof(buf));
if (vp->v_vflag & VV_ISTTY)
strlcat(buf, "|VV_ISTTY", sizeof(buf));
if (vp->v_vflag & VV_NOSYNC)
strlcat(buf, "|VV_NOSYNC", sizeof(buf));
Add decoding of the missed VI_ and VV_ flags to ddb "show vnode" command. MFC after: 3 days
2012-11-04 13:32:45 +00:00
if (vp->v_vflag & VV_ETERNALDEV)
strlcat(buf, "|VV_ETERNALDEV", sizeof(buf));
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
if (vp->v_vflag & VV_CACHEDLABEL)
strlcat(buf, "|VV_CACHEDLABEL", sizeof(buf));
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if (vp->v_vflag & VV_TEXT)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VV_TEXT", sizeof(buf));
if (vp->v_vflag & VV_COPYONWRITE)
strlcat(buf, "|VV_COPYONWRITE", sizeof(buf));
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if (vp->v_vflag & VV_SYSTEM)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VV_SYSTEM", sizeof(buf));
if (vp->v_vflag & VV_PROCDEP)
strlcat(buf, "|VV_PROCDEP", sizeof(buf));
if (vp->v_vflag & VV_NOKNOTE)
strlcat(buf, "|VV_NOKNOTE", sizeof(buf));
Add gjournal specific code to the UFS file system: - Add FS_GJOURNAL flag which enables gjournal support on a file system. - Add cg_unrefs field to the cylinder group structure which holds number of unreferenced (orphaned) inodes in the given cylinder group. - Add fs_unrefs field to the super block structure which holds total number of unreferenced (orphaned) inodes. - When file or a directory is orphaned (last reference is removed, but object is still open), increase fs_unrefs and cg_unrefs fields, which is a hint for fsck in which cylinder groups looks for such (orphaned) objects. - When file is last closed, decrease {fs,cg}_unrefs fields. - Add VV_DELETED vnode flag which points at orphaned objects. Sponsored by: home.pl
2006-10-31 21:48:54 +00:00
if (vp->v_vflag & VV_DELETED)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VV_DELETED", sizeof(buf));
if (vp->v_vflag & VV_MD)
strlcat(buf, "|VV_MD", sizeof(buf));
Add decoding of the missed VI_ and VV_ flags to ddb "show vnode" command. MFC after: 3 days
2012-11-04 13:32:45 +00:00
if (vp->v_vflag & VV_FORCEINSMQ)
strlcat(buf, "|VV_FORCEINSMQ", sizeof(buf));
flags = vp->v_vflag & ~(VV_ROOT | VV_ISTTY | VV_NOSYNC | VV_ETERNALDEV |
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
VV_CACHEDLABEL | VV_TEXT | VV_COPYONWRITE | VV_SYSTEM | VV_PROCDEP |
Add decoding of the missed VI_ and VV_ flags to ddb "show vnode" command. MFC after: 3 days
2012-11-04 13:32:45 +00:00
VV_NOKNOTE | VV_DELETED | VV_MD | VV_FORCEINSMQ);
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
if (flags != 0) {
snprintf(buf2, sizeof(buf2), "|VV(0x%lx)", flags);
strlcat(buf, buf2, sizeof(buf));
}
if (vp->v_iflag & VI_MOUNT)
strlcat(buf, "|VI_MOUNT", sizeof(buf));
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if (vp->v_iflag & VI_DOOMED)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VI_DOOMED", sizeof(buf));
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
if (vp->v_iflag & VI_FREE)
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
strlcat(buf, "|VI_FREE", sizeof(buf));
Add decoding of the missed VI_ and VV_ flags to ddb "show vnode" command. MFC after: 3 days
2012-11-04 13:32:45 +00:00
if (vp->v_iflag & VI_ACTIVE)
strlcat(buf, "|VI_ACTIVE", sizeof(buf));
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
if (vp->v_iflag & VI_DOINGINACT)
strlcat(buf, "|VI_DOINGINACT", sizeof(buf));
if (vp->v_iflag & VI_OWEINACT)
strlcat(buf, "|VI_OWEINACT", sizeof(buf));
Remove VI_AGE vnode iflag, it is unused. Noted by: bde Sponsored by: The FreeBSD Foundation
2015-11-27 01:45:40 +00:00
flags = vp->v_iflag & ~(VI_MOUNT | VI_DOOMED | VI_FREE |
Add decoding of the missed VI_ and VV_ flags to ddb "show vnode" command. MFC after: 3 days
2012-11-04 13:32:45 +00:00
VI_ACTIVE | VI_DOINGINACT | VI_OWEINACT);
Improve vn_printf() by: - adding missing vnode flags, - printing unknown flags as numbers, - using strlcat() instead of strcat(). Approved by: re (bmah)
2007-08-13 21:23:30 +00:00
if (flags != 0) {
snprintf(buf2, sizeof(buf2), "|VI(0x%lx)", flags);
strlcat(buf, buf2, sizeof(buf));
}
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
printf(" flags (%s)\n", buf + 1);
Improve vprint() a little bit: break long lines, reduce indent and tell if the VI_LOCK() is held.
2004-12-03 12:09:34 +00:00
if (mtx_owned(VI_MTX(vp)))
printf(" VI_LOCKed");
Remove extra ; at end of if(). Found by: bz
2005-03-27 07:52:12 +00:00
if (vp->v_object != NULL)
When printing the vnode information from ddb, print the lengths of the dirty and clean buffer queues. Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (gjb)
2013-10-01 20:18:33 +00:00
printf(" v_object %p ref %d pages %d "
"cleanbuf %d dirtybuf %d\n",
- Remove vx_lock, vx_unlock, vx_wait, etc. - Add a vn_start_write/vn_finished_write around vlrureclaim so we don't do writing ops without suspending. This could suspend the vlruproc which should not be a problem under normal circumstances. - Manually implement VMIGHTFREE in vlrureclaim as this was the only instance where it was used. - Acquire a lock before calling vgone() as it now requires it. - Move the acquisition of the vnode interlock from vtryrecycle() to getnewvnode() so that if it fails we don't drop and reacquire the vnode_free_list_mtx. - Check for a usecount or holdcount at the end of vtryrecycle() in case someone grabbed a ref while we were recycling. Abort the recycle, and on the final ref drop this vnode will be placed on the head of the free list. - Move the redundant VOP_INACTIVE protection code into the local vinactive() routine to avoid code bloat. - Keep the vnode lock held across calls to vgone() in several places. - vgonel() no longer uses XLOCK, instead callers must hold an exclusive vnode lock. The VI_DOOMED flag is set to allow other threads to detect a vnode which is no longer valid. This flag is set until the last reference is gone, and there are no chances for a new ref. vgonel() holds this lock across the entire function, which greatly simplifies logic. _ Only vfree() in one place in vgone() not three. - Adjust vget() to check the VI_DOOMED flag prior to waiting on the lock in the LK_NOWAIT case. In other cases, check after we have slept and acquired an exlusive lock. This will simulate the old vx_wait() behavior. Sponsored by: Isilon Systems, Inc.
2005-03-13 11:54:28 +00:00
vp->v_object, vp->v_object->ref_count,
When printing the vnode information from ddb, print the lengths of the dirty and clean buffer queues. Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (gjb)
2013-10-01 20:18:33 +00:00
vp->v_object->resident_page_count,
Fix argument ordering in vn_printf(). MFC after: 3 days
2015-09-26 22:16:54 +00:00
vp->v_bufobj.bo_clean.bv_cnt,
vp->v_bufobj.bo_dirty.bv_cnt);
Change vprint() to vn_printf() which takes varargs. Add #define for vprint() to call vn_printf().
2005-01-24 13:58:08 +00:00
printf(" ");
Regularize the vop_stdlock'ing protocol across all the filesystems that use it. Specifically, vop_stdlock uses the lock pointed to by vp->v_vnlock. By default, getnewvnode sets up vp->v_vnlock to reference vp->v_lock. Filesystems that wish to use the default do not need to allocate a lock at the front of their node structure (as some still did) or do a lockinit. They can simply start using vn_lock/VOP_UNLOCK. Filesystems that wish to manage their own locks, but still use the vop_stdlock functions (such as nullfs) can simply replace vp->v_vnlock with a pointer to the lock that they wish to have used for the vnode. Such filesystems are responsible for setting the vp->v_vnlock back to the default in their vop_reclaim routine (e.g., vp->v_vnlock = &vp->v_lock). In theory, this set of changes cleans up the existing filesystem lock interface and should have no function change to the existing locking scheme. Sponsored by: DARPA & NAI Labs.
2002-10-14 03:20:36 +00:00
lockmgr_printinfo(vp->v_vnlock);
Finish cleanup of vprint() which was begun with changing v_tag to a string. Remove extraneous uses of vop_null, instead defering to the default op. Rename vnode type "vfs" to the more descriptive "syncer". Fix formatting for various filesystems that use vop_print.
2003-03-03 19:15:40 +00:00
if (vp->v_data != NULL)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
VOP_PRINT(vp);
}
Changed #ifdef around printlockedvnodes() from DEBUG to DDB.
1995-04-16 11:33:33 +00:00
#ifdef DDB
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* List all of the locked vnodes in the system.
* Called when debugging the kernel.
*/
Rename the db command lockedvnodes to lockedvnods so that it fits on the help screen and one doens't think we have a lockedvnodesmap command.
2002-06-29 04:45:09 +00:00
DB_SHOW_COMMAND(lockedvnods, lockedvnodes)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
In r114945 the line 'nmp = TAILQ_NEXT(mp, mnt_list);' was duplicated. Instead of just removing the duplicate, convert the loop to TAILQ_FOREACH().
2013-08-17 14:13:45 +00:00
struct mount *mp;
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
struct vnode *vp;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Remove bogus locking from DDB's "show lockedvnods" command: using synchronization primitives from inside DDB is generally a bad idea, and in this case it frequently results in panics due to DDB commands being executed from the sio fast interrupt context on a serial console. Replace the locking with a note that a lack of locking means that DDB may get see inconsistent views of the mount and vnode lists, which could also result in a panic. More frequently, though, this avoids a panic than causes it. Discussed with ages ago: bde Approved by: re (scottl)
2003-05-12 14:37:47 +00:00
/*
* Note: because this is DDB, we can't obey the locking semantics
* for these structures, which means we could catch an inconsistent
* state and dereference a nasty pointer. Not much to be done
* about that.
*/
In "show lockedvnods" DDB command, use db_printf() rather than printf() so that the results end up in the DDB output stream rather than the console output stream. This should likely also be done for the vprint() function it calls. MFC after: 3 months
2007-12-28 00:47:31 +00:00
db_printf("Locked vnodes\n");
In r114945 the line 'nmp = TAILQ_NEXT(mp, mnt_list);' was duplicated. Instead of just removing the duplicate, convert the loop to TAILQ_FOREACH().
2013-08-17 14:13:45 +00:00
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) {
In r114945 the line 'nmp = TAILQ_NEXT(mp, mnt_list);' was duplicated. Instead of just removing the duplicate, convert the loop to TAILQ_FOREACH().
2013-08-17 14:13:45 +00:00
if (vp->v_type != VMARKER && VOP_ISLOCKED(vp))
Replace all remaining calls to vprint(9) with vn_printf(9), and remove the old macro. MFC after: 1 month
2016-08-10 16:12:31 +00:00
vn_printf(vp, "vnode ");
Merged some missing locking from Lite2: - getnewvnode() and vref() were missing one simple_unlock() each. - the Lite2 locking changes weren't merged at all in printlockedvnodes() or sysctl_vnode(). Merging these undid some KNF style regressions.
1997-02-25 19:33:23 +00:00
}
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
}
Add 'show vnode <addr>' DDB command.
2006-09-04 22:15:44 +00:00
/*
* Show details about the given vnode.
*/
DB_SHOW_COMMAND(vnode, db_show_vnode)
{
struct vnode *vp;
if (!have_addr)
return;
vp = (struct vnode *)addr;
vn_printf(vp, "vnode ");
}
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
/*
* Show details about the given mount point.
*/
DB_SHOW_COMMAND(mount, db_show_mount)
{
struct mount *mp;
Extend ddb(4) "show mount" command to print active string mount options. Note that only option names are printed, not values. Reviewed by: pjd Approved by: trasz (mentor) MFC after: 2 weeks
2009-11-19 14:33:03 +00:00
struct vfsopt *opt;
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
struct statfs *sp;
struct vnode *vp;
char buf[512];
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
uint64_t mflags;
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
u_int flags;
if (!have_addr) {
/* No address given, print short info about all mount points. */
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
db_printf("%p %s on %s (%s)\n", mp,
mp->mnt_stat.f_mntfromname,
mp->mnt_stat.f_mntonname,
mp->mnt_stat.f_fstypename);
Be more friendly for DDB pager. Educated by: jhb's BSDCan presentation
2008-05-18 21:08:12 +00:00
if (db_pager_quit)
break;
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
}
db_printf("\nMore info: show mount <addr>\n");
return;
}
mp = (struct mount *)addr;
db_printf("%p %s on %s (%s)\n", mp, mp->mnt_stat.f_mntfromname,
mp->mnt_stat.f_mntonname, mp->mnt_stat.f_fstypename);
buf[0] = '\0';
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
mflags = mp->mnt_flag;
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
#define MNT_FLAG(flag) do { \
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
if (mflags & (flag)) { \
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
if (buf[0] != '\0') \
strlcat(buf, ", ", sizeof(buf)); \
strlcat(buf, (#flag) + 4, sizeof(buf)); \
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
mflags &= ~(flag); \
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
} \
} while (0)
MNT_FLAG(MNT_RDONLY);
MNT_FLAG(MNT_SYNCHRONOUS);
MNT_FLAG(MNT_NOEXEC);
MNT_FLAG(MNT_NOSUID);
Order the enumeration of the MNT_ flags to be the same as the order of their definitions. MFC after: 3 days
2012-11-04 13:31:41 +00:00
MNT_FLAG(MNT_NFS4ACLS);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
MNT_FLAG(MNT_UNION);
MNT_FLAG(MNT_ASYNC);
MNT_FLAG(MNT_SUIDDIR);
MNT_FLAG(MNT_SOFTDEP);
MNT_FLAG(MNT_NOSYMFOLLOW);
MNT_FLAG(MNT_GJOURNAL);
MNT_FLAG(MNT_MULTILABEL);
MNT_FLAG(MNT_ACLS);
MNT_FLAG(MNT_NOATIME);
MNT_FLAG(MNT_NOCLUSTERR);
MNT_FLAG(MNT_NOCLUSTERW);
Order the enumeration of the MNT_ flags to be the same as the order of their definitions. MFC after: 3 days
2012-11-04 13:31:41 +00:00
MNT_FLAG(MNT_SUJ);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
MNT_FLAG(MNT_EXRDONLY);
MNT_FLAG(MNT_EXPORTED);
MNT_FLAG(MNT_DEFEXPORTED);
MNT_FLAG(MNT_EXPORTANON);
MNT_FLAG(MNT_EXKERB);
MNT_FLAG(MNT_EXPUBLIC);
MNT_FLAG(MNT_LOCAL);
MNT_FLAG(MNT_QUOTA);
MNT_FLAG(MNT_ROOTFS);
MNT_FLAG(MNT_USER);
MNT_FLAG(MNT_IGNORE);
MNT_FLAG(MNT_UPDATE);
MNT_FLAG(MNT_DELEXPORT);
MNT_FLAG(MNT_RELOAD);
MNT_FLAG(MNT_FORCE);
MNT_FLAG(MNT_SNAPSHOT);
MNT_FLAG(MNT_BYFSID);
#undef MNT_FLAG
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
if (mflags != 0) {
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
if (buf[0] != '\0')
strlcat(buf, ", ", sizeof(buf));
snprintf(buf + strlen(buf), sizeof(buf) - strlen(buf),
Make sure all intermediate variables holding mount flags (mnt_flag) and that all internal kernel calls passing mount flags are declared as uint64_t so that flags in the top 32-bits are not lost. MFC after: 2 weeks
2012-01-17 01:08:01 +00:00
"0x%016jx", mflags);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
}
db_printf(" mnt_flag = %s\n", buf);
buf[0] = '\0';
flags = mp->mnt_kern_flag;
#define MNT_KERN_FLAG(flag) do { \
if (flags & (flag)) { \
if (buf[0] != '\0') \
strlcat(buf, ", ", sizeof(buf)); \
strlcat(buf, (#flag) + 5, sizeof(buf)); \
flags &= ~(flag); \
} \
} while (0)
MNT_KERN_FLAG(MNTK_UNMOUNTF);
MNT_KERN_FLAG(MNTK_ASYNC);
MNT_KERN_FLAG(MNTK_SOFTDEP);
MNT_KERN_FLAG(MNTK_NOINSMNTQ);
Add missing mnt_kern_flag flags in 'show mount' output.
2010-04-03 11:15:55 +00:00
MNT_KERN_FLAG(MNTK_DRAINING);
MNT_KERN_FLAG(MNTK_REFEXPIRE);
MNT_KERN_FLAG(MNTK_EXTENDED_SHARED);
MNT_KERN_FLAG(MNTK_SHARED_WRITES);
Add decoding of the missed MNT_KERN_ flags to ddb "show mount" command. MFC after: 3 weeks
2012-11-04 13:33:13 +00:00
MNT_KERN_FLAG(MNTK_NO_IOPF);
MNT_KERN_FLAG(MNTK_VGONE_UPPER);
MNT_KERN_FLAG(MNTK_VGONE_WAITER);
MNT_KERN_FLAG(MNTK_LOOKUP_EXCL_DOTDOT);
MNT_KERN_FLAG(MNTK_MARKER);
File systems that do not use the buffer cache (such as ZFS) must use VOP_FSYNC() to perform the NFS server's Commit operation. This patch adds a mnt_kern_flag called MNTK_USES_BCACHE which is set by file systems that use the buffer cache. If this flag is not set, the NFS server always does a VOP_FSYNC(). This should be ok for old file system modules that do not set MNTK_USES_BCACHE, since calling VOP_FSYNC() is correct, although it might not be optimal for file systems that use the buffer cache. Reviewed by: kib MFC after: 2 weeks
2015-04-15 20:16:31 +00:00
MNT_KERN_FLAG(MNTK_USES_BCACHE);
Decomission mnt_noasync. Introduce MNTK_NOASYNC mnt_kern_flag which allows a filesystem to request VFS to not allow MNTK_ASYNC. MFC after: 1 week
2012-03-09 00:12:05 +00:00
MNT_KERN_FLAG(MNTK_NOASYNC);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
MNT_KERN_FLAG(MNTK_UNMOUNT);
MNT_KERN_FLAG(MNTK_MWAIT);
MNT_KERN_FLAG(MNTK_SUSPEND);
MNT_KERN_FLAG(MNTK_SUSPEND2);
MNT_KERN_FLAG(MNTK_SUSPENDED);
MNT_KERN_FLAG(MNTK_LOOKUP_SHARED);
Add missing mnt_kern_flag flags in 'show mount' output.
2010-04-03 11:15:55 +00:00
MNT_KERN_FLAG(MNTK_NOKNOTE);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
#undef MNT_KERN_FLAG
if (flags != 0) {
if (buf[0] != '\0')
strlcat(buf, ", ", sizeof(buf));
snprintf(buf + strlen(buf), sizeof(buf) - strlen(buf),
"0x%08x", flags);
}
db_printf(" mnt_kern_flag = %s\n", buf);
Extend ddb(4) "show mount" command to print active string mount options. Note that only option names are printed, not values. Reviewed by: pjd Approved by: trasz (mentor) MFC after: 2 weeks
2009-11-19 14:33:03 +00:00
db_printf(" mnt_opt = ");
opt = TAILQ_FIRST(mp->mnt_opt);
if (opt != NULL) {
db_printf("%s", opt->name);
opt = TAILQ_NEXT(opt, link);
while (opt != NULL) {
db_printf(", %s", opt->name);
opt = TAILQ_NEXT(opt, link);
}
}
db_printf("\n");
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
sp = &mp->mnt_stat;
db_printf(" mnt_stat = { version=%u type=%u flags=0x%016jx "
"bsize=%ju iosize=%ju blocks=%ju bfree=%ju bavail=%jd files=%ju "
"ffree=%jd syncwrites=%ju asyncwrites=%ju syncreads=%ju "
"asyncreads=%ju namemax=%u owner=%u fsid=[%d, %d] }\n",
(u_int)sp->f_version, (u_int)sp->f_type, (uintmax_t)sp->f_flags,
(uintmax_t)sp->f_bsize, (uintmax_t)sp->f_iosize,
(uintmax_t)sp->f_blocks, (uintmax_t)sp->f_bfree,
(intmax_t)sp->f_bavail, (uintmax_t)sp->f_files,
(intmax_t)sp->f_ffree, (uintmax_t)sp->f_syncwrites,
(uintmax_t)sp->f_asyncwrites, (uintmax_t)sp->f_syncreads,
(uintmax_t)sp->f_asyncreads, (u_int)sp->f_namemax,
(u_int)sp->f_owner, (int)sp->f_fsid.val[0], (int)sp->f_fsid.val[1]);
db_printf(" mnt_cred = { uid=%u ruid=%u",
(u_int)mp->mnt_cred->cr_uid, (u_int)mp->mnt_cred->cr_ruid);
Add hierarchical jails. A jail may further virtualize its environment by creating a child jail, which is visible to that jail and to any parent jails. Child jails may be restricted more than their parents, but never less. Jail names reflect this hierarchy, being MIB-style dot-separated strings. Every thread now points to a jail, the default being prison0, which contains information about the physical system. Prison0's root directory is the same as rootvnode; its hostname is the same as the global hostname, and its securelevel replaces the global securelevel. Note that the variable "securelevel" has actually gone away, which should not cause any problems for code that properly uses securelevel_gt() and securelevel_ge(). Some jail-related permissions that were kept in global variables and set via sysctls are now per-jail settings. The sysctls still exist for backward compatibility, used only by the now-deprecated jail(2) system call. Approved by: bz (mentor)
2009-05-27 14:11:23 +00:00
if (jailed(mp->mnt_cred))
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
db_printf(", jail=%d", mp->mnt_cred->cr_prison->pr_id);
db_printf(" }\n");
db_printf(" mnt_ref = %d\n", mp->mnt_ref);
db_printf(" mnt_gen = %d\n", mp->mnt_gen);
db_printf(" mnt_nvnodelistsize = %d\n", mp->mnt_nvnodelistsize);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
db_printf(" mnt_activevnodelistsize = %d\n",
mp->mnt_activevnodelistsize);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
db_printf(" mnt_writeopcount = %d\n", mp->mnt_writeopcount);
db_printf(" mnt_maxsymlinklen = %d\n", mp->mnt_maxsymlinklen);
db_printf(" mnt_iosize_max = %d\n", mp->mnt_iosize_max);
db_printf(" mnt_hashseed = %u\n", mp->mnt_hashseed);
Add the mnt_lockref field to the ddb(4) 'show mount' command MFC after: 1 week Differential Revision: https://reviews.freebsd.org/D1688 Submitted by: Conrad Meyer <conrad.meyer@isilon.com> Sponsored by: EMC / Isilon Storage Division
2015-02-17 09:31:58 +00:00
db_printf(" mnt_lockref = %d\n", mp->mnt_lockref);
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
db_printf(" mnt_secondary_writes = %d\n", mp->mnt_secondary_writes);
db_printf(" mnt_secondary_accwrites = %d\n",
mp->mnt_secondary_accwrites);
db_printf(" mnt_gjprovider = %s\n",
mp->mnt_gjprovider != NULL ? mp->mnt_gjprovider : "NULL");
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
db_printf("\n\nList of active vnodes\n");
TAILQ_FOREACH(vp, &mp->mnt_activevnodelist, v_actfreelist) {
Be more friendly for DDB pager. Educated by: jhb's BSDCan presentation
2008-05-18 21:08:12 +00:00
if (vp->v_type != VMARKER) {
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
vn_printf(vp, "vnode ");
Be more friendly for DDB pager. Educated by: jhb's BSDCan presentation
2008-05-18 21:08:12 +00:00
if (db_pager_quit)
break;
}
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
}
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
db_printf("\n\nList of inactive vnodes\n");
TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) {
if (vp->v_type != VMARKER && (vp->v_iflag & VI_ACTIVE) == 0) {
vn_printf(vp, "vnode ");
if (db_pager_quit)
break;
}
}
Implement 'show mount' command in DDB. Without argument, it prints short info about all currently mounted file systems. When an address is given as an argument, prints detailed info about the given mount point. MFC after: 2 weeks
2008-04-26 13:04:48 +00:00
}
Add 'show vnode <addr>' DDB command.
2006-09-04 22:15:44 +00:00
#endif /* DDB */
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
/*
* Fill in a struct xvfsconf based on a struct vfsconf.
*/
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
static int
vfsconf2x(struct sysctl_req *req, struct vfsconf *vfsp)
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
{
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
struct xvfsconf xvfsp;
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
bzero(&xvfsp, sizeof(xvfsp));
strcpy(xvfsp.vfc_name, vfsp->vfc_name);
xvfsp.vfc_typenum = vfsp->vfc_typenum;
xvfsp.vfc_refcount = vfsp->vfc_refcount;
xvfsp.vfc_flags = vfsp->vfc_flags;
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
/*
* These are unused in userland, we keep them
* to not break binary compatibility.
*/
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
xvfsp.vfc_vfsops = NULL;
xvfsp.vfc_next = NULL;
return (SYSCTL_OUT(req, &xvfsp, sizeof(xvfsp)));
}
#ifdef COMPAT_FREEBSD32
struct xvfsconf32 {
uint32_t vfc_vfsops;
char vfc_name[MFSNAMELEN];
int32_t vfc_typenum;
int32_t vfc_refcount;
int32_t vfc_flags;
uint32_t vfc_next;
};
static int
vfsconf2x32(struct sysctl_req *req, struct vfsconf *vfsp)
{
struct xvfsconf32 xvfsp;
Correct a kernel stack leak in 32-bit compat when vfc_name is short. Don't zero unused pointer members again. Per discussion with secteam we are not issuing an advisory for this issue as we have no current evidence it leaks exploitable information. Reviewed by: rwatson, glebius, delphij MFC after: 1 day Sponsored by: DARPA, AFRL Differential Revision: https://reviews.freebsd.org/D10227
2017-04-04 17:32:08 +00:00
bzero(&xvfsp, sizeof(xvfsp));
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
strcpy(xvfsp.vfc_name, vfsp->vfc_name);
xvfsp.vfc_typenum = vfsp->vfc_typenum;
xvfsp.vfc_refcount = vfsp->vfc_refcount;
xvfsp.vfc_flags = vfsp->vfc_flags;
return (SYSCTL_OUT(req, &xvfsp, sizeof(xvfsp)));
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
}
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
#endif
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
Put deprecated sysctl code inside BURN_BRIDGES.
2004-04-11 21:09:22 +00:00
/*
* Top level filesystem related information gathering.
*/
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
static int
sysctl_vfs_conflist(SYSCTL_HANDLER_ARGS)
{
struct vfsconf *vfsp;
Convert the vfsconf list to a TAILQ. Introduce vfs_byname() function to find things on it. Staticize vfs_nmount() function under the name vfs_donmount(). Various cleanups.
2004-07-27 22:32:01 +00:00
int error;
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
Convert the vfsconf list to a TAILQ. Introduce vfs_byname() function to find things on it. Staticize vfs_nmount() function under the name vfs_donmount(). Various cleanups.
2004-07-27 22:32:01 +00:00
error = 0;
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
vfsconf_slock();
Convert the vfsconf list to a TAILQ. Introduce vfs_byname() function to find things on it. Staticize vfs_nmount() function under the name vfs_donmount(). Various cleanups.
2004-07-27 22:32:01 +00:00
TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) {
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
#ifdef COMPAT_FREEBSD32
if (req->flags & SCTL_MASK32)
error = vfsconf2x32(req, vfsp);
else
#endif
error = vfsconf2x(req, vfsp);
Convert the vfsconf list to a TAILQ. Introduce vfs_byname() function to find things on it. Staticize vfs_nmount() function under the name vfs_donmount(). Various cleanups.
2004-07-27 22:32:01 +00:00
if (error)
break;
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
}
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
vfsconf_sunlock();
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
return (error);
}
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
SYSCTL_PROC(_vfs, OID_AUTO, conflist, CTLTYPE_OPAQUE | CTLFLAG_RD |
CTLFLAG_MPSAFE, NULL, 0, sysctl_vfs_conflist,
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
"S,xvfsconf", "List of all configured filesystems");
Put deprecated sysctl code inside BURN_BRIDGES.
2004-04-11 21:09:22 +00:00
#ifndef BURN_BRIDGES
Remove __P.
2002-03-19 21:25:46 +00:00
static int sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS);
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
vfs_sysctl(SYSCTL_HANDLER_ARGS)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
{
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
int *name = (int *)arg1 - 1; /* XXX */
u_int namelen = arg2 + 1; /* XXX */
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
struct vfsconf *vfsp;
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
Change one printf() to log(). As noted in kern/159780, printf() is not very jail-friendly, since it can't be easily monitored by jail management tools. This patch reports an error via log() instead, which, if nobody is watching the log file, still prints to the console. Approved by: mentor (rwatson) Submitted by: Eugene Grosbein <eugen@eg.sd.rdtc.ru> MFC after: 5 days
2011-10-07 09:51:12 +00:00
log(LOG_WARNING, "userland calling deprecated sysctl, "
- Introduce a new struct xvfsconf, the userland version of struct vfsconf. - Make getvfsbyname() take a struct xvfsconf *. - Convert several consumers of getvfsbyname() to use struct xvfsconf. - Correct the getvfsbyname.3 manpage. - Create a new vfs.conflist sysctl to dump all the struct xvfsconf in the kernel, and rewrite getvfsbyname() to use this instead of the weird existing API. - Convert some {set,get,end}vfsent() consumers to use the new vfs.conflist sysctl. - Convert a vfsload() call in nfsiod.c to kldload() and remove the useless vfsisloadable() and endvfsent() calls. - Add a warning printf() in vfs_sysctl() to tell people they are using an old userland. After these changes, it's possible to modify struct vfsconf without breaking the binary compatibility. Please note that these changes don't break this compatibility either. When bp will have updated mount_smbfs(8) with the patch I sent him, there will be no more consumers of the {set,get,end}vfsent(), vfsisloadable() and vfsload() API, and I will promptly delete it.
2002-08-10 20:19:04 +00:00
"please rebuild world\n");
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#if 1 || defined(COMPAT_PRELITE2)
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
/* Resolve ambiguity between VFS_VFSCONF and VFS_GENERIC. */
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
if (namelen == 1)
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
return (sysctl_ovfs_conf(oidp, arg1, arg2, req));
#endif
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
switch (name[1]) {
case VFS_MAXTYPENUM:
if (namelen != 2)
return (ENOTDIR);
return (SYSCTL_OUT(req, &maxvfsconf, sizeof(int)));
case VFS_CONF:
if (namelen != 3)
return (ENOTDIR); /* overloaded */
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
vfsconf_slock();
TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) {
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
if (vfsp->vfc_typenum == name[2])
break;
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
}
vfsconf_sunlock();
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
if (vfsp == NULL)
return (EOPNOTSUPP);
Provide some compat32 shims for sysctl vfs.conflist. It is required for getvfsbyname(3) operation when called from 32bit process, and getvfsbyname(3) is used by recent bsdtar import. Reported by: many Tested by: David Naylor <naylor.b.david@gmail.com> MFC after: 5 days
2012-08-22 20:05:34 +00:00
#ifdef COMPAT_FREEBSD32
if (req->flags & SCTL_MASK32)
return (vfsconf2x32(req, vfsp));
else
#endif
return (vfsconf2x(req, vfsp));
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
}
return (EOPNOTSUPP);
}
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
static SYSCTL_NODE(_vfs, VFS_GENERIC, generic, CTLFLAG_RD | CTLFLAG_SKIP |
CTLFLAG_MPSAFE, vfs_sysctl,
"Generic filesystem");
Attach vfs_sysctl() one level lower so that only the levels below VFS_GENERIC aren't done in the FreeBSD way. The previous commit broke the nfs sysctls.
1997-03-04 18:31:56 +00:00
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#if 1 || defined(COMPAT_PRELITE2)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
sysctl_ovfs_conf(SYSCTL_HANDLER_ARGS)
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
{
int error;
struct vfsconf *vfsp;
Merged Lite2's vfs_sysctl(). It doesn't fit very well into FreeBSD's (phk's) sysctl framework, and I needed special code to disambiguate the VFS_GENERIC node from the VFS_VFSCONF leaf, so I only converted the leaves to the FreeBSD framework. The error handling isn't quite right. CSRGS's sysctls seem to return ENOTDIR too much and FreeBSD's sysctls don't agree with the man page.
1997-03-03 12:58:20 +00:00
struct ovfsconf ovfs;
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
vfsconf_slock();
Convert the vfsconf list to a TAILQ. Introduce vfs_byname() function to find things on it. Staticize vfs_nmount() function under the name vfs_donmount(). Various cleanups.
2004-07-27 22:32:01 +00:00
TAILQ_FOREACH(vfsp, &vfsconf, vfc_list) {
If we are going to 1. Copy a NULL-terminated string into a fixed-length buffer, and 2. copyout that buffer to userland, we really ought to 0. Zero the entire buffer first. Security: FreeBSD-SA-05:08.kmem
2005-05-06 02:50:00 +00:00
bzero(&ovfs, sizeof(ovfs));
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
ovfs.vfc_vfsops = vfsp->vfc_vfsops; /* XXX used as flag */
strcpy(ovfs.vfc_name, vfsp->vfc_name);
ovfs.vfc_index = vfsp->vfc_typenum;
ovfs.vfc_refcount = vfsp->vfc_refcount;
ovfs.vfc_flags = vfsp->vfc_flags;
error = SYSCTL_OUT(req, &ovfs, sizeof ovfs);
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
if (error != 0) {
vfsconf_sunlock();
return (error);
}
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
}
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
vfsconf_sunlock();
return (0);
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
}
Oops, the previous revision unconfigured too much pre-Lite2 compatibilty cruft. At least lsvfs(1) was broken.
1998-08-29 13:13:10 +00:00
#endif /* 1 || COMPAT_PRELITE2 */
Put deprecated sysctl code inside BURN_BRIDGES.
2004-04-11 21:09:22 +00:00
#endif /* !BURN_BRIDGES */
Moved vfs sysctls to where Lite2 put them. No code changes yet.
1997-03-02 11:06:22 +00:00
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
#define KINFO_VNODESLOP 10
Bracket the kern.vnode sysctl in #ifdef notyet because it results in massive locking issues on diskless systems. It is also not clear that this sysctl is non-dangerous in its requirements for locked down memory on large RAM systems.
2003-02-23 18:09:05 +00:00
#ifdef notyet
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
/*
* Dump vnode list (via sysctl).
*/
/* ARGSUSED */
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
static int
Previous commit changing SYSCTL_HANDLER_ARGS violated KNF. Pointed out by: bde
2000-07-04 11:25:35 +00:00
sysctl_vnode(SYSCTL_HANDLER_ARGS)
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
{
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
struct xvnode *xvn;
struct mount *mp;
struct vnode *vp;
int error, len, n;
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
- Extend the vnode_free_list_mtx to cover numvnodes and freevnodes. This was done only some of the time before, and now it is uniformly applied.
2002-08-13 05:29:48 +00:00
/*
* Stale numvnodes access is not fatal here.
*/
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
req->lock = 0;
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
len = (numvnodes + KINFO_VNODESLOP) * sizeof *xvn;
if (!req->oldptr)
/* Make an estimate */
return (SYSCTL_OUT(req, 0, len));
These changes embody the support of the fully coherent merged VM buffer cache, much higher filesystem I/O performance, and much better paging performance. It represents the culmination of over 6 months of R&D. The majority of the merged VM/cache work is by John Dyson. The following highlights the most significant changes. Additionally, there are (mostly minor) changes to the various filesystem modules (nfs, msdosfs, etc) to support the new VM/buffer scheme. vfs_bio.c: Significant rewrite of most of vfs_bio to support the merged VM buffer cache scheme. The scheme is almost fully compatible with the old filesystem interface. Significant improvement in the number of opportunities for write clustering. vfs_cluster.c, vfs_subr.c Upgrade and performance enhancements in vfs layer code to support merged VM/buffer cache. Fixup of vfs_cluster to eliminate the bogus pagemove stuff. vm_object.c: Yet more improvements in the collapse code. Elimination of some windows that can cause list corruption. vm_pageout.c: Fixed it, it really works better now. Somehow in 2.0, some "enhancements" broke the code. This code has been reworked from the ground-up. vm_fault.c, vm_page.c, pmap.c, vm_object.c Support for small-block filesystems with merged VM/buffer cache scheme. pmap.c vm_map.c Dynamic kernel VM size, now we dont have to pre-allocate excessive numbers of kernel PTs. vm_glue.c Much simpler and more effective swapping code. No more gratuitous swapping. proc.h Fixed the problem that the p_lock flag was not being cleared on a fork. swap_pager.c, vnode_pager.c Removal of old vfs_bio cruft to support the past pseudo-coherency. Now the code doesn't need it anymore. machdep.c Changes to better support the parameter values for the merged VM/buffer cache scheme. machdep.c, kern_exec.c, vm_glue.c Implemented a seperate submap for temporary exec string space and another one to contain process upages. This eliminates all map fragmentation problems that previously existed. ffs_inode.c, ufs_inode.c, ufs_readwrite.c Changes for merged VM/buffer cache. Add "bypass" support for sneaking in on busy buffers. Submitted by: John Dyson and David Greenman
1995-01-09 16:06:02 +00:00
Split the mlock() kernel code into two parts, mlock(), which unpacks the syscall arguments and does the suser() permission check, and kern_mlock(), which does the resource limit checking and calls vm_map_wire(). Split munlock() in a similar way. Enable the RLIMIT_MEMLOCK checking code in kern_mlock(). Replace calls to vslock() and vsunlock() in the sysctl code with calls to kern_mlock() and kern_munlock() so that the sysctl code will obey the wired memory limits. Nuke the vslock() and vsunlock() implementations, which are no longer used. Add a member to struct sysctl_req to track the amount of memory that is wired to handle the request. Modify sysctl_wire_old_buffer() to return an error if its call to kern_mlock() fails. Only wire the minimum of the length specified in the sysctl request and the length specified in its argument list. It is recommended that sysctl handlers that use sysctl_wire_old_buffer() should specify reasonable estimates for the amount of data they want to return so that only the minimum amount of memory is wired no matter what length has been specified by the request. Modify the callers of sysctl_wire_old_buffer() to look for the error return. Modify sysctl_old_user to obey the wired buffer length and clean up its implementation. Reviewed by: bms
2004-02-26 00:27:04 +00:00
error = sysctl_wire_old_buffer(req, 0);
if (error != 0)
return (error);
Back out M_* changes, per decision of the TRB. Approved by: trb
2003-02-19 05:47:46 +00:00
xvn = malloc(len, M_TEMP, M_ZERO | M_WAITOK);
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
n = 0;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
TAILQ_FOREACH(mp, &mountlist, mnt_list) {
Improve VFS locking: - Implement real draining for vfs consumers by not relying on the mnt_lock and using instead a refcount in order to keep track of lock requesters. - Due to the change above, remove the mnt_lock lockmgr because it is now useless. - Due to the change above, vfs_busy() is no more linked to a lockmgr. Change so its KPI by removing the interlock argument and defining 2 new flags for it: MBF_NOWAIT which basically replaces the LK_NOWAIT of the old version (which was unlinked from the lockmgr alredy) and MBF_MNTLSTLOCK which provides the ability to drop the mountlist_mtx once the mnt interlock is held (ability still desired by most consumers). - The stub used into vfs_mount_destroy(), that allows to override the mnt_ref if running for more than 3 seconds, make it totally useless. Remove it as it was thought to work into older versions. If a problem of "refcount held never going away" should appear, we will need to fix properly instead than trust on such hackish solution. - Fix a bug where returning (with an error) from dounmount() was still leaving the MNTK_MWAIT flag on even if it the waiters were actually woken up. Just a place in vfs_mount_destroy() is left because it is going to recycle the structure in any case, so it doesn't matter. - Remove the markercnt refcount as it is useless. This patch modifies VFS ABI and breaks KPI for vfs_busy() so manpages and __FreeBSD_version will be modified accordingly. Discussed with: kib Tested by: pho
2008-11-02 10:15:42 +00:00
if (vfs_busy(mp, MBF_NOWAIT | MBF_MNTLSTLOCK))
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
continue;
Remove mntvnode_mtx and replace it with per-mountpoint mutex. Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to operate on this mutex transparently. Eventually new mutex will be protecting more fields in struct mount, not only vnode list. Discussed with: jeff
2003-11-05 04:30:08 +00:00
MNT_ILOCK(mp);
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) {
if (n == len)
break;
vref(vp);
xvn[n].xv_size = sizeof *xvn;
xvn[n].xv_vnode = vp;
Eliminate v_id and v_ddid. The name cache now holds references to vnodes whose names it caches, so we no longer need a `generation number' to tell us if a referenced vnode is invalid. Replace the use of the parent's v_id in the hash function with the address of the parent vnode. Tested by: Peter Holm Glanced at by: jeff, phk
2005-03-30 03:01:36 +00:00
xvn[n].xv_id = 0; /* XXX compat */
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
#define XV_COPY(field) xvn[n].xv_##field = vp->v_##field
XV_COPY(usecount);
XV_COPY(writecount);
XV_COPY(holdcnt);
XV_COPY(mount);
XV_COPY(numoutput);
XV_COPY(type);
#undef XV_COPY
- Replace v_flag with v_iflag and v_vflag - v_vflag is protected by the vnode lock and is used when synchronization with VOP calls is needed. - v_iflag is protected by interlock and is used for dealing with vnode management issues. These flags include X/O LOCK, FREE, DOOMED, etc. - All accesses to v_iflag and v_vflag have either been locked or marked with mp_fixme's. - Many ASSERT_VOP_LOCKED calls have been added where the locking was not clear. - Many functions in vfs_subr.c were restructured to provide for stronger locking. Idea stolen from: BSD/OS
2002-08-04 10:29:36 +00:00
xvn[n].xv_flag = vp->v_vflag;
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
switch (vp->v_type) {
case VREG:
case VDIR:
case VLNK:
break;
case VBLK:
case VCHR:
if (vp->v_rdev == NULL) {
vrele(vp);
continue;
}
xvn[n].xv_dev = dev2udev(vp->v_rdev);
break;
case VSOCK:
xvn[n].xv_socket = vp->v_socket;
break;
case VFIFO:
xvn[n].xv_fifo = vp->v_fifoinfo;
break;
case VNON:
case VBAD:
default:
/* shouldn't happen? */
vrele(vp);
continue;
}
vrele(vp);
++n;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Remove mntvnode_mtx and replace it with per-mountpoint mutex. Introduce two new macros MNT_ILOCK(mp)/MNT_IUNLOCK(mp) to operate on this mutex transparently. Eventually new mutex will be protecting more fields in struct mount, not only vnode list. Discussed with: jeff
2003-11-05 04:30:08 +00:00
MNT_IUNLOCK(mp);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&mountlist_mtx);
Decontextualize vfs_busy(), vfs_unbusy() and vfs_mount_alloc() functions. Manpages are updated accordingly. Tested by: Diego Sardina <siarodx at gmail dot com>
2008-08-31 14:26:08 +00:00
vfs_unbusy(mp);
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
if (n == len)
break;
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock(&mountlist_mtx);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
Initialize v_cachedid to -1 in getnewvnode(). Reintroduce the kern.vnode sysctl and make it export xvnodes rather than vnodes. Sponsored by: DARPA, NAI Labs
2002-07-31 12:24:35 +00:00
error = SYSCTL_OUT(req, xvn, n * sizeof *xvn);
free(xvn, M_TEMP);
return (error);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Remove Giant acquisition from the mount and unmount pathes. It could be claimed that two things were reasonable protected by Giant. One is vfsconf list links, which is converted to the new dedicated sx vfsconf_sx. Another is vfsconf.vfc_refcount, which is now updated with atomics. Note that vfc_refcount still has the same races now as it has under the Giant, the unload of filesystem modules can happen while the module is still in use. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2014-08-03 03:27:54 +00:00
SYSCTL_PROC(_kern, KERN_VNODE, vnode, CTLTYPE_OPAQUE | CTLFLAG_RD |
CTLFLAG_MPSAFE, 0, 0, sysctl_vnode, "S,xvnode",
"");
Bracket the kern.vnode sysctl in #ifdef notyet because it results in massive locking issues on diskless systems. It is also not clear that this sysctl is non-dangerous in its requirements for locked down memory on large RAM systems.
2003-02-23 18:09:05 +00:00
#endif
Mega commit for sysctl. Convert the remaining sysctl stuff to the new way of doing things. the devconf stuff is the reason for the large number of files. Cleaned up some compiler warnings while I were there.
1995-11-20 12:42:39 +00:00
Make vfs_unmountall() unmount /dev after /, not before. The only reason this didn't result in an unclean shutdown is that devfs ignores MNT_FORCE flag. Reviewed by: kib@ MFC after: 1 month Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3467
2015-08-24 13:18:13 +00:00
static void
unmount_or_warn(struct mount *mp)
{
int error;
error = dounmount(mp, MNT_FORCE, curthread);
if (error != 0) {
printf("unmount of %s failed (", mp->mnt_stat.f_mntonname);
if (error == EBUSY)
printf("BUSY)\n");
else
printf("%d)\n", error);
}
}
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
/*
Fixed unmounting of the root fs. vfs_unmountroot() wasn't fully updated to do Lite2 locking and vfs_unmountall() wasn't as simple as the Lite2 version.
1997-02-26 15:35:42 +00:00
* Unmount all filesystems. The list is traversed in reverse order
* of mounting to avoid dependencies.
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
*/
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vfs_unmountall(void)
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
{
Make vfs_unmountall() unmount /dev after /, not before. The only reason this didn't result in an unclean shutdown is that devfs ignores MNT_FORCE flag. Reviewed by: kib@ MFC after: 1 month Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3467
2015-08-24 13:18:13 +00:00
struct mount *mp, *tmp;
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR1(KTR_VFS, "%s: unmounting all filesystems", __func__);
Fixed unmounting of the root fs. vfs_unmountroot() wasn't fully updated to do Lite2 locking and vfs_unmountall() wasn't as simple as the Lite2 version.
1997-02-26 15:35:42 +00:00
/*
* Since this only runs when rebooting, it is not interlocked.
*/
Make vfs_unmountall() unmount /dev after /, not before. The only reason this didn't result in an unclean shutdown is that devfs ignores MNT_FORCE flag. Reviewed by: kib@ MFC after: 1 month Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3467
2015-08-24 13:18:13 +00:00
TAILQ_FOREACH_REVERSE_SAFE(mp, &mountlist, mntlist, mnt_list, tmp) {
Right now, dounmount() is called with unreferenced mount point. Nothing stops a parallel unmount to suceed before the given call to dounmount() checks and locks the covered vnode. Prevent dounmount() from acting on the freed (although type-stable) memory by changing the interface to require the mount point to be referenced. dounmount() consumes the reference on return, regardless of the sucessfull or erronous result. Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2015-05-27 09:22:50 +00:00
vfs_ref(mp);
Make vfs_unmountall() unmount /dev after /, not before. The only reason this didn't result in an unclean shutdown is that devfs ignores MNT_FORCE flag. Reviewed by: kib@ MFC after: 1 month Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3467
2015-08-24 13:18:13 +00:00
/*
* Forcibly unmounting "/dev" before "/" would prevent clean
* unmount of the latter.
*/
if (mp == rootdevmp)
continue;
unmount_or_warn(mp);
This is the kernel Lite/2 commit. There are some requisite userland changes, so don't expect to be able to run the kernel as-is (very well) without the appropriate Lite/2 userland changes. The system boots and can mount UFS filesystems. Untested: ext2fs, msdosfs, NFS Known problems: Incorrect Berkeley ID strings in some files. Mount_std mounts will not work until the getfsent library routine is changed. Reviewed by: various people Submitted by: Jeffery Hsu <hsu@freebsd.org>
1997-02-10 02:22:35 +00:00
}
Make vfs_unmountall() unmount /dev after /, not before. The only reason this didn't result in an unclean shutdown is that devfs ignores MNT_FORCE flag. Reviewed by: kib@ MFC after: 1 month Sponsored by: The FreeBSD Foundation Differential Revision: https://reviews.freebsd.org/D3467
2015-08-24 13:18:13 +00:00
if (rootdevmp != NULL)
unmount_or_warn(rootdevmp);
BSD 4.4 Lite Kernel Sources
1994-05-24 10:09:53 +00:00
}
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
/*
* perform msync on all vnodes under a mount point
* the mount point must be locked.
*/
void
Change the vnode list under the mount point from a LIST to a TAILQ in preparation for an implementation of limiting code for kern.maxvnodes. MFC after: 3 days
2001-10-23 01:21:29 +00:00
vfs_msync(struct mount *mp, int flags)
{
Add marker vnodes to ensure that all vnodes associated with the mount point are iterated over when using MNT_VNODE_FOREACH. Reviewed by: truckman
2006-01-09 20:42:19 +00:00
struct vnode *vp, *mvp;
In vfs_msync(), test to see if the vnode being examined is "interesting" (ie: it has a vm_object attached and is marked as OBJ_MIGHTBEDIRTY) before attempting to lock it. This should reduce the cpu hit that is incurred when doing a sync(2) and when the syncer process is doing the 30-second writeback of dirty mmap() data to disk. Skip this speedup if we are doing an unmount() to be sure to get everything - we can afford to occasionally miss a msync while the system is running, but not at unmount. I'm not sure about the VXLOCK and MNT_WAIT case, it seems a bit odd to skip doing a page_clean at unmount time just because a vnode is VXLOCKed, but that's what was being done before...
1998-04-18 06:26:16 +00:00
struct vm_object *obj;
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
Add more KTR_VFS logging point in order to have a more effective tracing. Reviewed by: brueffer, kib Tested by: Gianni Trematerra <giovanni D trematerra A gmail D com>
2009-02-05 15:03:35 +00:00
CTR2(KTR_VFS, "%s: mp %p", __func__, mp);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
vnlru_return_batch(mp);
This update uses the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point to replace MNT_VNODE_FOREACH_ALL in the vfs_msync, ffs_sync_lazy, and qsync routines. The vfs_msync routine is run every 30 seconds for every writably mounted filesystem. It ensures that any files mmap'ed from the filesystem with modified pages have those pages queued to be written back to the file from which they are mapped. The ffs_lazy_sync and qsync routines are run every 30 seconds for every writably mounted UFS/FFS filesystem. The ffs_lazy_sync routine ensures that any files that have been accessed in the previous 30 seconds have had their access times queued for updating in the filesystem. The qsync routine ensures that any files with modified quotas have those quotas queued to be written back to their associated quota file. In a system configured with 250,000 vnodes, less than 1000 are typically active at any point in time. Prior to this change all 250,000 vnodes would be locked and inspected twice every minute by the syncer. For UFS/FFS filesystems they would be locked and inspected six times every minute (twice by each of these three routines since each of these routines does its own pass over the vnodes associated with a mount point). With this change the syncer now locks and inspects only the tiny set of vnodes that are active. Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 07:00:28 +00:00
MNT_VNODE_FOREACH_ACTIVE(vp, mp, mvp) {
VI_OBJDIRTY vnode flag mirrors the state of OBJ_MIGHTBEDIRTY vm object flag. Besides providing the redundand information, need to update both vnode and object flags causes more acquisition of vnode interlock. OBJ_MIGHTBEDIRTY is only checked for vnode-backed vm objects. Remove VI_OBJDIRTY and make sure that OBJ_MIGHTBEDIRTY is set only for vnode-backed vm objects. Suggested and reviewed by: alc Tested by: pho MFC after: 3 weeks
2009-12-21 12:29:38 +00:00
obj = vp->v_object;
if (obj != NULL && (obj->flags & OBJ_MIGHTBEDIRTY) != 0 &&
Axe the 'thread' argument from VOP_ISLOCKED() and lockstatus() as it is always curthread. As KPI gets broken by this patch, manpages and __FreeBSD_version will be updated by further commits. Tested by: Andrea Barberio <insomniac at slackware dot it>
2008-02-25 18:45:57 +00:00
(flags == MNT_WAIT || VOP_ISLOCKED(vp) == 0)) {
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
if (!vget(vp,
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
LK_EXCLUSIVE | LK_RETRY | LK_INTERLOCK,
curthread)) {
if (vp->v_vflag & VV_NOSYNC) { /* unlinked */
vput(vp);
continue;
}
Don't use VOP_GETVOBJECT, use vp->v_object directly.
2005-01-25 00:40:01 +00:00
obj = vp->v_object;
if (obj != NULL) {
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WLOCK(obj);
Introduce a global lock for the vm subsystem (vm_mtx). vm_mtx does not recurse and is required for most low level vm operations. faults can not be taken without holding Giant. Memory subsystems can now call the base page allocators safely. Almost all atomic ops were removed as they are covered under the vm mutex. Alpha and ia64 now need to catch up to i386's trap handlers. FFS and NFS have been tested, other filesystems will need minor changes (grabbing the vm lock when twiddling page properties). Reviewed (partially) by: jake, jhb
2001-05-19 01:28:09 +00:00
vm_object_page_clean(obj, 0, 0,
flags == MNT_WAIT ?
OBJPC_SYNC : OBJPC_NOSYNC);
Switch the vm_object mutex to be a rwlock. This will enable in the future further optimizations where the vm_object lock will be held in read mode most of the time the page cache resident pool of pages are accessed for reading purposes. The change is mostly mechanical but few notes are reported: * The KPI changes as follow: - VM_OBJECT_LOCK() -> VM_OBJECT_WLOCK() - VM_OBJECT_TRYLOCK() -> VM_OBJECT_TRYWLOCK() - VM_OBJECT_UNLOCK() -> VM_OBJECT_WUNLOCK() - VM_OBJECT_LOCK_ASSERT(MA_OWNED) -> VM_OBJECT_ASSERT_WLOCKED() (in order to avoid visibility of implementation details) - The read-mode operations are added: VM_OBJECT_RLOCK(), VM_OBJECT_TRYRLOCK(), VM_OBJECT_RUNLOCK(), VM_OBJECT_ASSERT_RLOCKED(), VM_OBJECT_ASSERT_LOCKED() * The vm/vm_pager.h namespace pollution avoidance (forcing requiring sys/mutex.h in consumers directly to cater its inlining functions using VM_OBJECT_LOCK()) imposes that all the vm/vm_pager.h consumers now must include also sys/rwlock.h. * zfs requires a quite convoluted fix to include FreeBSD rwlocks into the compat layer because the name clash between FreeBSD and solaris versions must be avoided. At this purpose zfs redefines the vm_object locking functions directly, isolating the FreeBSD components in specific compat stubs. The KPI results heavilly broken by this commit. Thirdy part ports must be updated accordingly (I can think off-hand of VirtualBox, for example). Sponsored by: EMC / Isilon storage division Reviewed by: jeff Reviewed by: pjd (ZFS specific review) Discussed with: alc Tested by: pho
2013-03-09 02:32:23 +00:00
VM_OBJECT_WUNLOCK(obj);
Make our v_usecount vnode reference count work identically to the original BSD code. The association between the vnode and the vm_object no longer includes reference counts. The major difference is that vm_object's are no longer freed gratuitiously from the vnode, and so once an object is created for the vnode, it will last as long as the vnode does. When a vnode object reference count is incremented, then the underlying vnode reference count is incremented also. The two "objects" are now more intimately related, and so the interactions are now much less complex. When vnodes are now normally placed onto the free queue with an object still attached. The rundown of the object happens at vnode rundown time, and happens with exactly the same filesystem semantics of the original VFS code. There is absolutely no need for vnode_pager_uncache and other travesties like that anymore. A side-effect of these changes is that SMP locking should be much simpler, the I/O copyin/copyout optimizations work, NFS should be more ponderable, and further work on layered filesystems should be less frustrating, because of the totally coherent management of the vnode objects and vnodes. Please be careful with your system while running this code, but I would greatly appreciate feedback as soon a reasonably possible.
1998-01-06 05:26:17 +00:00
}
vput(vp);
}
- Lock down the syncer with sync_mtx. - Enable vfs_badlock_mutex by default. - Assert that the vp is locked in VOP_UNLOCK. - Use standard interlock macros in remaining code. - Correct a race in getnewvnode(). - Lock access to v_numoutput with interlock. - Lock access to buf lists and splay tree with interlock. - Add VOP and VI asserts. - Lock b_vnbufs with the vnode interlock. - Add vrefcnt() for callers who want to retreive the vnode ref without holding a lock. Add a comment that describes when this is safe. - Add vholdl() and vdropl() so that callers who already own the interlock can avoid race conditions and unnecessary unlocking. - Move the VOP_GETATTR() in vflush() into the WRITECLOSE conditional case. - Hold the interlock before droping the mntlist_mtx in vflush() to avoid a race. - Fix locking in vfs_msync().
2002-09-25 02:22:21 +00:00
} else
VI_UNLOCK(vp);
Changes to fix the following bugs: 1) Files weren't properly synced on filesystems other than UFS. In some cases, this lead to lost data. Most likely would be noticed on NFS. The fix is to make the VM page sync/object_clean general rather than in each filesystem. 2) Mixing regular and mmaped file I/O on NFS was very broken. It caused chunks of files to end up as zeroes rather than the intended contents. The fix was to fix several race conditions and to kludge up the "b_dirtyoff" and "b_dirtyend" that NFS relies upon - paying attention to page modifications that occurred via the mmapping. Reviewed by: David Greenman Submitted by: John Dyson
1995-05-21 21:39:31 +00:00
}
}
Even though this looks like it, this is not a complex code change. The interface into the "VMIO" system has changed to be more consistant and robust. Essentially, it is now no longer necessary to call vn_open to get merged VM/Buffer cache operation, and exceptional conditions such as merged operation of VBLK devices is simpler and more correct. This code corrects a potentially large set of problems including the problems with ktrace output and loaded systems, file create/deletes, etc. Most of the changes to NFS are cosmetic and name changes, eliminating a layer of subroutine calls. The direct calls to vput/vrele have been re-instituted for better cross platform compatibility. Reviewed by: davidg
1996-08-21 21:56:23 +00:00
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
static void
When creation of the v_pollinfo raced and our instance of vpollinfo must be destroyed, knlist_clear() and seldrain() calls could be avoided, since vpollinfo was not used. More, the knlist_clear() calling protocol requires the knlist locked, which is not true at the call site. Split the destruction into the helper destroy_vpollinfo_free(), and call it when raced, instead of destroy_vpollinfo(). Reported and tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2013-07-28 06:59:29 +00:00
destroy_vpollinfo_free(struct vpollinfo *vi)
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
{
Clear the vnode knotes before destroying vpollinfo. Reported and tested by: Patrick Lamaiziere <patfbsd@davenulle.org> Sponsored by: The FreeBSD Foundation MFC after: 2 weeks
2013-07-17 10:56:21 +00:00
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
knlist_destroy(&vi->vpi_selinfo.si_note);
mtx_destroy(&vi->vpi_lock);
uma_zfree(vnodepoll_zone, vi);
}
When creation of the v_pollinfo raced and our instance of vpollinfo must be destroyed, knlist_clear() and seldrain() calls could be avoided, since vpollinfo was not used. More, the knlist_clear() calling protocol requires the knlist locked, which is not true at the call site. Split the destruction into the helper destroy_vpollinfo_free(), and call it when raced, instead of destroy_vpollinfo(). Reported and tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2013-07-28 06:59:29 +00:00
static void
destroy_vpollinfo(struct vpollinfo *vi)
{
knlist_clear(&vi->vpi_selinfo.si_note, 1);
seldrain(&vi->vpi_selinfo);
destroy_vpollinfo_free(vi);
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
/*
sys/kern: spelling fixes in comments. No functional change.
2016-04-29 22:15:33 +00:00
* Initialize per-vnode helper structure to hold poll-related state.
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
*/
void
v_addpollinfo(struct vnode *vp)
{
In v_addpollinfo(), we allocate storage to back vp->v_pollinfo. However, we may sleep when doing so; check that we didn't race with another thread allocating storage for the vnode after allocation is made to a local pointer, and only update the vnode pointer if it's still NULL. Otherwise, accept that another thread got there first, and release the local storage. Discussed with: jmg
2004-08-11 01:27:53 +00:00
struct vpollinfo *vi;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
if (vp->v_pollinfo != NULL)
return;
zero this struct as it depends upon it... Reviewed by: mjg Differential Revision: https://reviews.freebsd.org/D2890
2015-06-23 18:40:20 +00:00
vi = uma_zalloc(vnodepoll_zone, M_WAITOK | M_ZERO);
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
mtx_init(&vi->vpi_lock, "vnode pollinfo", NULL, MTX_DEF);
knlist_init(&vi->vpi_selinfo.si_note, vp, vfs_knllock,
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
vfs_knlunlock, vfs_knl_assert_locked, vfs_knl_assert_unlocked);
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
VI_LOCK(vp);
In v_addpollinfo(), we allocate storage to back vp->v_pollinfo. However, we may sleep when doing so; check that we didn't race with another thread allocating storage for the vnode after allocation is made to a local pointer, and only update the vnode pointer if it's still NULL. Otherwise, accept that another thread got there first, and release the local storage. Discussed with: jmg
2004-08-11 01:27:53 +00:00
if (vp->v_pollinfo != NULL) {
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
VI_UNLOCK(vp);
When creation of the v_pollinfo raced and our instance of vpollinfo must be destroyed, knlist_clear() and seldrain() calls could be avoided, since vpollinfo was not used. More, the knlist_clear() calling protocol requires the knlist locked, which is not true at the call site. Split the destruction into the helper destroy_vpollinfo_free(), and call it when raced, instead of destroy_vpollinfo(). Reported and tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2013-07-28 06:59:29 +00:00
destroy_vpollinfo_free(vi);
In v_addpollinfo(), we allocate storage to back vp->v_pollinfo. However, we may sleep when doing so; check that we didn't race with another thread allocating storage for the vnode after allocation is made to a local pointer, and only update the vnode pointer if it's still NULL. Otherwise, accept that another thread got there first, and release the local storage. Discussed with: jmg
2004-08-11 01:27:53 +00:00
return;
}
vp->v_pollinfo = vi;
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
VI_UNLOCK(vp);
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
/*
* Record a process's interest in events which might happen to
* a vnode. Because poll uses the historic select-style interface
* internally, this routine serves as both the ``check for any
* pending events'' and the ``record my interest in future events''
* functions. (These are done together, while the lock is held,
* to avoid race conditions.)
*/
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vn_pollrecord(struct vnode *vp, struct thread *td, int events)
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
{
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
v_addpollinfo(vp);
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_lock(&vp->v_pollinfo->vpi_lock);
if (vp->v_pollinfo->vpi_revents & events) {
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
/*
* This leaves events we are not interested
* in available for the other process which
* which presumably had requested them
* (otherwise they would never have been
* recorded).
*/
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
events &= vp->v_pollinfo->vpi_revents;
vp->v_pollinfo->vpi_revents &= ~events;
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Style return statements in vn_pollrecord().
2008-10-28 12:22:33 +00:00
return (events);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
Move the stuff related to select and poll out of struct vnode. The use of the zone allocator may or may not be overkill. There is an XXX: over in ufs/ufs/ufs_vnops.c that jlemon may need to revisit. This shaves about 60 bytes of struct vnode which on my laptop means 600k less RAM used for vnodes.
2002-02-17 21:15:36 +00:00
vp->v_pollinfo->vpi_events |= events;
selrecord(td, &vp->v_pollinfo->vpi_selinfo);
mtx_unlock(&vp->v_pollinfo->vpi_lock);
Style return statements in vn_pollrecord().
2008-10-28 12:22:33 +00:00
return (0);
Add support for poll(2) on files. vop_nopoll() now returns POLLNVAL if one of the new poll types is requested; hopefully this will not break any existing code. (This is done so that programs have a dependable way of determining whether a filesystem supports the extended poll types or not.) The new poll types added are: POLLWRITE - file contents may have been modified POLLNLINK - file was linked, unlinked, or renamed POLLATTRIB - file's attributes may have been changed POLLEXTEND - file was extended Note that the internal operation of poll() means that it is impossible for two processes to reliably poll for the same event (this could be fixed but may not be worth it), so it is not possible to rewrite `tail -f' to use poll at this time.
1997-12-15 03:09:59 +00:00
}
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Routine to create and manage a filesystem syncer vnode.
*/
Remove __P.
2002-03-19 21:25:46 +00:00
#define sync_close ((int (*)(struct vop_close_args *))nullop)
static int sync_fsync(struct vop_fsync_args *);
static int sync_inactive(struct vop_inactive_args *);
static int sync_reclaim(struct vop_reclaim_args *);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Back when VOP_* was introduced, we did not have new-style struct initializations but we did have lofty goals and big ideals. Adjust to more contemporary circumstances and gain type checking. Replace the entire vop_t frobbing thing with properly typed structures. The only casualty is that we can not add a new VOP_ method with a loadable module. History has not given us reason to belive this would ever be feasible in the the first place. Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc. Give coda correct prototypes and function definitions for all vop_()s. Generate a bit more data from the vnode_if.src file: a struct vop_vector and protype typedefs for all vop methods. Add a new vop_bypass() and make vop_default be a pointer to another struct vop_vector. Remove a lot of vfs_init since vop_vector is ready to use from the compiler. Cast various vop_mumble() to void * with uppercase name, for instance VOP_PANIC, VOP_NULL etc. Implement VCALL() by making vdesc_offset the offsetof() the relevant function pointer in vop_vector. This is disgusting but since the code is generated by a script comparatively safe. The alternative for nullfs etc. would be much worse. Fix up all vnode method vectors to remove casts so they become typesafe. (The bulk of this is generated by scripts)
2004-12-01 23:16:38 +00:00
static struct vop_vector sync_vnodeops = {
.vop_bypass = VOP_EOPNOTSUPP,
.vop_close = sync_close, /* close */
.vop_fsync = sync_fsync, /* fsync */
.vop_inactive = sync_inactive, /* inactive */
.vop_reclaim = sync_reclaim, /* reclaim */
Since renaming of vop_lock to _vop_lock, pre- and post-condition function calls are no more generated for vop_lock. Rename _vop_lock to vop_lock1 to satisfy tools/vnode_if.awk assumption about vop naming conventions. This restores pre/post-condition calls.
2007-05-18 13:02:13 +00:00
.vop_lock1 = vop_stdlock, /* lock */
Back when VOP_* was introduced, we did not have new-style struct initializations but we did have lofty goals and big ideals. Adjust to more contemporary circumstances and gain type checking. Replace the entire vop_t frobbing thing with properly typed structures. The only casualty is that we can not add a new VOP_ method with a loadable module. History has not given us reason to belive this would ever be feasible in the the first place. Eliminate in toto VOCALL(), vop_t, VNODEOP_SET() etc. Give coda correct prototypes and function definitions for all vop_()s. Generate a bit more data from the vnode_if.src file: a struct vop_vector and protype typedefs for all vop methods. Add a new vop_bypass() and make vop_default be a pointer to another struct vop_vector. Remove a lot of vfs_init since vop_vector is ready to use from the compiler. Cast various vop_mumble() to void * with uppercase name, for instance VOP_PANIC, VOP_NULL etc. Implement VCALL() by making vdesc_offset the offsetof() the relevant function pointer in vop_vector. This is disgusting but since the code is generated by a script comparatively safe. The alternative for nullfs etc. would be much worse. Fix up all vnode method vectors to remove casts so they become typesafe. (The bulk of this is generated by scripts)
2004-12-01 23:16:38 +00:00
.vop_unlock = vop_stdunlock, /* unlock */
.vop_islocked = vop_stdislocked, /* islocked */
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
};
/*
* Create a new filesystem syncer vnode for the specified mount point.
*/
There is a bug in vfs_allocate_syncvnode() failure handling in mount code. Actually it is hard to properly handle such a failure, especially in MNT_UPDATE case. The only reason for the vfs_allocate_syncvnode() function to fail is getnewvnode() failure. Fortunately it is impossible for current implementation of getnewvnode() to fail, so we can assert this and make vfs_allocate_syncvnode() void. This in turn free us from handling its failures in the mount code. Reviewed by: kib MFC after: 1 month
2010-08-28 08:57:15 +00:00
void
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vfs_allocate_syncvnode(struct mount *mp)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
struct vnode *vp;
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
struct bufobj *bo;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
static long start, incr, next;
int error;
/* Allocate a new vnode */
There is a bug in vfs_allocate_syncvnode() failure handling in mount code. Actually it is hard to properly handle such a failure, especially in MNT_UPDATE case. The only reason for the vfs_allocate_syncvnode() function to fail is getnewvnode() failure. Fortunately it is impossible for current implementation of getnewvnode() to fail, so we can assert this and make vfs_allocate_syncvnode() void. This in turn free us from handling its failures in the mount code. Reviewed by: kib MFC after: 1 month
2010-08-28 08:57:15 +00:00
error = getnewvnode("syncer", mp, &sync_vnodeops, &vp);
if (error != 0)
panic("vfs_allocate_syncvnode: getnewvnode() failed");
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
vp->v_type = VNON;
Introduce the VV_FORCEINSMQ vnode flag. It instructs the insmnque() function to ignore the unmounting and forces insertion of the vnode into the mount vnode list. Change insmntque() to fail when forced unmount is in progress and VV_FORCEINSMQ is not specified. Add an assertion to the insmntque(), requiring the vnode to be exclusively locked for mp-safe filesystems. Use the VV_FORCEINSMQ for the creation of the syncvnode. Tested by: pho Reviewed by: tegge MFC after: 1 month
2008-08-28 09:08:15 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
vp->v_vflag |= VV_FORCEINSMQ;
Make insmntque() externally visibile and allow it to fail (e.g. during late stages of unmount). On failure, the vnode is recycled. Add insmntque1(), to allow for file system specific cleanup when recycling vnode on failure. Change getnewvnode() to no longer call insmntque(). Previously, embryonic vnodes were put onto the list of vnode belonging to a file system, which is unsafe for a file system marked MPSAFE. Change vfs_hash_insert() to no longer lock the vnode. The caller now has that responsibility. Change most file systems to lock the vnode and call insmntque() or insmntque1() after a new vnode has been sufficiently setup. Handle failed insmntque*() calls by propagating errors to callers, possibly after some file system specific cleanup. Approved by: re (kensmith) Reviewed by: kib In collaboration with: kib
2007-03-13 01:50:27 +00:00
error = insmntque(vp, mp);
if (error != 0)
There is a bug in vfs_allocate_syncvnode() failure handling in mount code. Actually it is hard to properly handle such a failure, especially in MNT_UPDATE case. The only reason for the vfs_allocate_syncvnode() function to fail is getnewvnode() failure. Fortunately it is impossible for current implementation of getnewvnode() to fail, so we can assert this and make vfs_allocate_syncvnode() void. This in turn free us from handling its failures in the mount code. Reviewed by: kib MFC after: 1 month
2010-08-28 08:57:15 +00:00
panic("vfs_allocate_syncvnode: insmntque() failed");
Introduce the VV_FORCEINSMQ vnode flag. It instructs the insmnque() function to ignore the unmounting and forces insertion of the vnode into the mount vnode list. Change insmntque() to fail when forced unmount is in progress and VV_FORCEINSMQ is not specified. Add an assertion to the insmntque(), requiring the vnode to be exclusively locked for mp-safe filesystems. Use the VV_FORCEINSMQ for the creation of the syncvnode. Tested by: pho Reviewed by: tegge MFC after: 1 month
2008-08-28 09:08:15 +00:00
vp->v_vflag &= ~VV_FORCEINSMQ;
VOP_UNLOCK(vp, 0);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Place the vnode onto the syncer worklist. We attempt to
* scatter them about on the list so that they will go off
* at evenly distributed times even if all the filesystems
* are mounted at once.
*/
next += incr;
if (next == 0 || next > syncer_maxdelay) {
start /= 2;
incr /= 2;
if (start == 0) {
start = syncer_maxdelay / 2;
incr = syncer_maxdelay;
}
next = start;
}
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
bo = &vp->v_bufobj;
BO_LOCK(bo);
vn_syncer_add_to_worklist(bo, syncdelay > 0 ? next % syncdelay : 0);
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
/* XXX - vn_syncer_add_to_worklist() also grabs and drops sync_mtx. */
mtx_lock(&sync_mtx);
sync_vnode_count++;
Protect mnt_syncer with the sync_mtx. This prevents a (rare) vnode leak when mount and update are executed in parallel. Encapsulate syncer vnode deallocation into the helper function vfs_deallocate_syncvnode(), to not externalize sync_mtx from vfs_subr.c. Found and reviewed by: jh (previous version of the patch) Tested by: pho MFC after: 3 weeks
2010-09-11 13:06:06 +00:00
if (mp->mnt_syncer == NULL) {
mp->mnt_syncer = vp;
vp = NULL;
}
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
mtx_unlock(&sync_mtx);
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(bo);
Protect mnt_syncer with the sync_mtx. This prevents a (rare) vnode leak when mount and update are executed in parallel. Encapsulate syncer vnode deallocation into the helper function vfs_deallocate_syncvnode(), to not externalize sync_mtx from vfs_subr.c. Found and reviewed by: jh (previous version of the patch) Tested by: pho MFC after: 3 weeks
2010-09-11 13:06:06 +00:00
if (vp != NULL) {
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
vgone(vp);
vput(vp);
}
}
void
vfs_deallocate_syncvnode(struct mount *mp)
{
struct vnode *vp;
mtx_lock(&sync_mtx);
vp = mp->mnt_syncer;
if (vp != NULL)
mp->mnt_syncer = NULL;
mtx_unlock(&sync_mtx);
if (vp != NULL)
vrele(vp);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
/*
* Do a lazy sync of the filesystem.
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
sync_fsync(struct vop_fsync_args *ap)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
struct vnode *syncvp = ap->a_vp;
struct mount *mp = syncvp->v_mount;
Current implementations of sync(2) and syncer vnode fsync() VOP uses mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which is needed to guarantee a synchronous completion of the initiated i/o before syscall or VOP return. Global removal of MNTK_ASYNC option is harmful because not only i/o started from corresponding thread becomes synchronous, but all i/o is synchronous on the filesystem which is initiated during sync(2) or syncer activity. Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local thread flag to disable async i/o for current thread only. Use the opportunity to move DOINGASYNC() macro into sys/vnode.h and consistently use it through places which tested for MNTK_ASYNC. Some testing demonstrated 60-70% improvements in run time for the metadata-intensive operations on async-mounted UFS volumes, but still with great deviation due to other reasons. Reviewed by: mckusick Tested by: scottl MFC after: 2 weeks
2012-02-06 11:04:36 +00:00
int error, save;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
struct bufobj *bo;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* We only need to do something if this is a lazy evaluation.
*/
if (ap->a_waitfor != MNT_LAZY)
return (0);
/*
* Move ourselves to the back of the sync list.
*/
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
bo = &syncvp->v_bufobj;
BO_LOCK(bo);
vn_syncer_add_to_worklist(bo, syncdelay);
BO_UNLOCK(bo);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
/*
* Walk the list of vnodes pushing all that are dirty and
* not already on the sync list.
*/
Remove unneeded mountlist_mtx acquisition from sync_fsync(). All struct mount fields accessed by sync_fsync() are protected by MNT_MTX.
2014-06-11 12:56:49 +00:00
if (vfs_busy(mp, MBF_NOWAIT) != 0)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (0);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
if (vn_start_write(NULL, &mp, V_NOWAIT) != 0) {
Decontextualize vfs_busy(), vfs_unbusy() and vfs_mount_alloc() functions. Manpages are updated accordingly. Tested by: Diego Sardina <siarodx at gmail dot com>
2008-08-31 14:26:08 +00:00
vfs_unbusy(mp);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
return (0);
}
Current implementations of sync(2) and syncer vnode fsync() VOP uses mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which is needed to guarantee a synchronous completion of the initiated i/o before syscall or VOP return. Global removal of MNTK_ASYNC option is harmful because not only i/o started from corresponding thread becomes synchronous, but all i/o is synchronous on the filesystem which is initiated during sync(2) or syncer activity. Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local thread flag to disable async i/o for current thread only. Use the opportunity to move DOINGASYNC() macro into sys/vnode.h and consistently use it through places which tested for MNTK_ASYNC. Some testing demonstrated 60-70% improvements in run time for the metadata-intensive operations on async-mounted UFS volumes, but still with great deviation due to other reasons. Reviewed by: mckusick Tested by: scottl MFC after: 2 weeks
2012-02-06 11:04:36 +00:00
save = curthread_pflags_set(TDP_SYNCIO);
When the softdep conversion took place, the periodic vfs_msync() from update got lost. This is responsible for ensuring that dirty mmap() pages get periodically written to disk. Without it, long time mmap's might not have their dirty pages written out at all of the system crashes or isn't cleanly shut down. This could be nasty if you've got a long-running writing via mmap(), dirty pages used to get written to disk within 30 seconds or so.
1998-04-16 03:31:26 +00:00
vfs_msync(mp, MNT_NOWAIT);
Remove the thread argument from the FSD (File-System Dependent) parts of the VFS. Now all the VFS_* functions and relating parts don't want the context as long as it always refers to curthread. In some points, in particular when dealing with VOPs and functions living in the same namespace (eg. vflush) which still need to be converted, pass curthread explicitly in order to retain the old behaviour. Such loose ends will be fixed ASAP. While here fix a bug: now, UFS_EXTATTR can be compiled alone without the UFS_EXTATTR_AUTOSTART option. VFS KPI is heavilly changed by this commit so thirdy parts modules needs to be recompiled. Bump __FreeBSD_version in order to signal such situation.
2009-05-11 15:33:26 +00:00
error = VFS_SYNC(mp, MNT_LAZY);
Current implementations of sync(2) and syncer vnode fsync() VOP uses mnt_noasync counter to temporary remove MNTK_ASYNC mount option, which is needed to guarantee a synchronous completion of the initiated i/o before syscall or VOP return. Global removal of MNTK_ASYNC option is harmful because not only i/o started from corresponding thread becomes synchronous, but all i/o is synchronous on the filesystem which is initiated during sync(2) or syncer activity. Instead of removing MNTK_ASYNC from mnt_kern_flag, provide a local thread flag to disable async i/o for current thread only. Use the opportunity to move DOINGASYNC() macro into sys/vnode.h and consistently use it through places which tested for MNTK_ASYNC. Some testing demonstrated 60-70% improvements in run time for the metadata-intensive operations on async-mounted UFS volumes, but still with great deviation due to other reasons. Reviewed by: mckusick Tested by: scottl MFC after: 2 weeks
2012-02-06 11:04:36 +00:00
curthread_pflags_restore(save);
Add snapshots to the fast filesystem. Most of the changes support the gating of system calls that cause modifications to the underlying filesystem. The gating can be enabled by any filesystem that needs to consistently suspend operations by adding the vop_stdgetwritemount to their set of vnops. Once gating is enabled, the function vfs_write_suspend stops all new write operations to a filesystem, allows any filesystem modifying system calls already in progress to complete, then sync's the filesystem to disk and returns. The function vfs_write_resume allows the suspended write operations to begin again. Gating is not added by default for all filesystems as for SMP systems it adds two extra locks to such critical kernel paths as the write system call. Thus, gating should only be added as needed. Details on the use and current status of snapshots in FFS can be found in /sys/ufs/ffs/README.snapshot so for brevity and timelyness is not included here. Unless and until you create a snapshot file, these changes should have no effect on your system (famous last words).
2000-07-11 22:07:57 +00:00
vn_finished_write(mp);
Decontextualize vfs_busy(), vfs_unbusy() and vfs_mount_alloc() functions. Manpages are updated accordingly. Tested by: Diego Sardina <siarodx at gmail dot com>
2008-08-31 14:26:08 +00:00
vfs_unbusy(mp);
Within ufs, the ffs_sync and ffs_fsync functions did not always check for and/or report I/O errors. The result is that a VFS_SYNC or VOP_FSYNC called with MNT_WAIT could loop infinitely on ufs in the presence of a hard error writing a disk sector or in a filesystem full condition. This patch ensures that I/O errors will always be checked and returned. This patch also ensures that every call to VFS_SYNC or VOP_FSYNC with MNT_WAIT set checks for and takes appropriate action when an error is returned. Sponsored by: DARPA & NAI Labs.
2002-10-25 00:20:37 +00:00
return (error);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
/*
* The syncer vnode is no referenced.
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
sync_inactive(struct vop_inactive_args *ap)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
vgone(ap->a_vp);
return (0);
}
/*
* The syncer vnode is no longer needed and is being decommissioned.
Protect vn worklist and vn->v_{clean,dirty}blkhd at splbio(). Get rid of extra LIST_REMOVE() Reviewed by: hsu@FreeBSD.ORG (Jeffrey Hsu), mckusick@McKusick.COM Submitted by: hsu@FreeBSD.ORG (Jeffrey Hsu), dillon@backplane.com ( Matthew Dillon )
1999-02-19 17:36:58 +00:00
*
- Remove spls(). The locking that has replaced them is in place and they no longer serve as guidelines for future work.
2003-09-19 23:52:06 +00:00
* Modifications to the worklist must be protected by sync_mtx.
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
*/
Staticize.
1998-12-21 23:38:33 +00:00
static int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
sync_reclaim(struct vop_reclaim_args *ap)
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
{
struct vnode *vp = ap->a_vp;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
struct bufobj *bo;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
bo = &vp->v_bufobj;
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_LOCK(bo);
Protect mnt_syncer with the sync_mtx. This prevents a (rare) vnode leak when mount and update are executed in parallel. Encapsulate syncer vnode deallocation into the helper function vfs_deallocate_syncvnode(), to not externalize sync_mtx from vfs_subr.c. Found and reviewed by: jh (previous version of the patch) Tested by: pho MFC after: 3 weeks
2010-09-11 13:06:06 +00:00
mtx_lock(&sync_mtx);
if (vp->v_mount->mnt_syncer == vp)
vp->v_mount->mnt_syncer = NULL;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
if (bo->bo_flag & BO_ONWORKLST) {
LIST_REMOVE(bo, bo_synclist);
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
syncer_worklist_len--;
When shutting down the syncer kernel thread, first tell it to run faster and iterate to over its work list a few times in an attempt to empty the work list before the syncer terminates. This leaves fewer dirty blocks to be written at the "syncing disks" stage and keeps the the "giving up on N buffers" problem from being triggered by the presence of a large soft updates work list at system shutdown time. The downside is that the syncer takes noticeably longer to terminate. Tested by: "Arjan van Leeuwen" <avleeuwen AT piwebs DOT com> Approved by: mckusick
2004-07-01 23:59:19 +00:00
sync_vnode_count--;
Move the syncer linkage from vnode to bufobj. This is not quite a perfect separation: the syncer still think it knows that everything is a vnode.
2004-10-27 08:05:02 +00:00
bo->bo_flag &= ~BO_ONWORKLST;
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
}
Protect mnt_syncer with the sync_mtx. This prevents a (rare) vnode leak when mount and update are executed in parallel. Encapsulate syncer vnode deallocation into the helper function vfs_deallocate_syncvnode(), to not externalize sync_mtx from vfs_subr.c. Found and reviewed by: jh (previous version of the patch) Tested by: pho MFC after: 3 weeks
2010-09-11 13:06:06 +00:00
mtx_unlock(&sync_mtx);
- Complete part of the unfinished bufobj work by consistently using BO_LOCK/UNLOCK/MTX when manipulating the bufobj. - Create a new lock in the bufobj to lock bufobj fields independently. This leaves the vnode interlock as an 'identity' lock while the bufobj is an io lock. The bufobj lock is ordered before the vnode interlock and also before the mnt ilock. - Exploit this new lock order to simplify softdep_check_suspend(). - A few sync related functions are marked with a new XXX to note that we may not properly interlock against a non-zero bv_cnt when attempting to sync all vnodes on a mountlist. I do not believe this race is important. If I'm wrong this will make these locations easier to find. Reviewed by: kib (earlier diff) Tested by: kris, pho (earlier diff)
2008-03-22 09:15:16 +00:00
BO_UNLOCK(bo);
Reviewed by: dyson@freebsd.org (john Dyson), dg@root.com (david greenman) Submitted by: Kirk McKusick (mcKusick@mckusick.com) Obtained from: WHistle development tree
1998-03-08 09:59:44 +00:00
return (0);
}
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
/*
* Check if vnode represents a disk device
*/
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vn_isdisk(struct vnode *vp, int *errp)
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
{
Simplify vn_isdisk() a bit.
2003-10-12 14:04:39 +00:00
int error;
Move extern declaration of dead_vnodeop_p to a .h file. Remove race condition in vn_isdisk().
2000-09-05 21:09:56 +00:00
Don't take devmtx unnecessarily in vn_isdisk. MFC after: 1 week
2014-10-15 05:17:36 +00:00
if (vp->v_type != VCHR) {
error = ENOTBLK;
goto out;
}
Simplify vn_isdisk() a bit.
2003-10-12 14:04:39 +00:00
error = 0;
Hold dev_lock and check for NULL devsw pointer when we determine if a vnode is a disk.
2004-09-24 06:16:08 +00:00
dev_lock();
Don't take devmtx unnecessarily in vn_isdisk. MFC after: 1 week
2014-10-15 05:17:36 +00:00
if (vp->v_rdev == NULL)
Simplify vn_isdisk() a bit.
2003-10-12 14:04:39 +00:00
error = ENXIO;
Hold dev_lock and check for NULL devsw pointer when we determine if a vnode is a disk.
2004-09-24 06:16:08 +00:00
else if (vp->v_rdev->si_devsw == NULL)
error = ENXIO;
else if (!(vp->v_rdev->si_devsw->d_flags & D_DISK))
Simplify vn_isdisk() a bit.
2003-10-12 14:04:39 +00:00
error = ENOTBLK;
Hold dev_lock and check for NULL devsw pointer when we determine if a vnode is a disk.
2004-09-24 06:16:08 +00:00
dev_unlock();
Don't take devmtx unnecessarily in vn_isdisk. MFC after: 1 week
2014-10-15 05:17:36 +00:00
out:
Give vn_isdisk() a second argument where it can return a suitable errno. Suggested by: bde
2000-01-10 12:04:27 +00:00
if (errp != NULL)
Simplify vn_isdisk() a bit.
2003-10-12 14:04:39 +00:00
*errp = error;
return (error == 0);
Introduce vn_isdisk(struct vnode *vp) function, and use it to test for diskness.
1999-08-25 12:24:39 +00:00
}
o Add additional comment describing vaccess() behavior. Requested by: eivind Reviewed by: eivind, adrian
2000-09-20 17:18:12 +00:00
/*
More s/file system/filesystem/g
2002-05-16 21:28:32 +00:00
* Common filesystem object access control check routine. Accepts a
o Add additional comment describing vaccess() behavior. Requested by: eivind Reviewed by: eivind, adrian
2000-09-20 17:18:12 +00:00
* vnode's type, "mode", uid and gid, requested access mode, credentials,
* and optional call-by-reference privused argument allowing vaccess()
* to indicate to the caller whether privilege was used to satisfy the
Note that the privilege indicating flag to vaccess() originally used by the process accounting system is now deprecated.
2002-07-31 02:05:12 +00:00
* request (obsoleted). Returns 0 on success, or an errno on failure.
o Add additional comment describing vaccess() behavior. Requested by: eivind Reviewed by: eivind, adrian
2000-09-20 17:18:12 +00:00
*/
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
vaccess(enum vtype type, mode_t file_mode, uid_t file_uid, gid_t file_gid,
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
accmode_t accmode, struct ucred *cred, int *privused)
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
{
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
accmode_t dac_granted;
accmode_t priv_granted;
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
Provide default implementation for VOP_ACCESS(9), so that filesystems which want to provide VOP_ACCESSX(9) don't have to implement both. Note that this commit makes implementation of either of these two mandatory. Reviewed by: kib
2009-10-01 17:22:03 +00:00
KASSERT((accmode & ~(VEXEC | VWRITE | VREAD | VADMIN | VAPPEND)) == 0,
("invalid bit in accmode"));
Now that all the callers seem to be fixed, add KASSERTs to make sure VAPPEND is not being used improperly.
2009-12-26 11:36:10 +00:00
KASSERT((accmode & VAPPEND) == 0 || (accmode & VWRITE),
Fix some whitespace nits.
2010-04-03 11:19:20 +00:00
("VAPPEND without VWRITE"));
Provide default implementation for VOP_ACCESS(9), so that filesystems which want to provide VOP_ACCESSX(9) don't have to implement both. Note that this commit makes implementation of either of these two mandatory. Reviewed by: kib
2009-10-01 17:22:03 +00:00
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
/*
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
* Look for a normal, non-privileged way to access the file/directory
* as requested. If it exists, go with that.
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
*/
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
if (privused != NULL)
*privused = 0;
dac_granted = 0;
/* Check the owner. */
if (cred->cr_uid == file_uid) {
o Introduce new VOP_ACCESS() flag VADMIN, allowing file systems to perform "administrative" authorization checks. In most cases, the VADMIN test checks to make sure the credential effective uid is the same as the file owner. o Modify vaccess() to set VADMIN as an available right if the uid is appropriate. o Modify references to uid-based access control operations such that they now always invoke VOP_ACCESS() instead of using hard-coded policy checks. o This allows alternative UFS policies to be implemented by replacing only ufs_access() (such as mandatory system policies). o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the vnode: I believe that new invocations of VOP_ACCESS() are always called with the lock held. o Some direct checks of the uid remain, largely associated with the QUOTA and SUIDDIR code. Reviewed by: eivind Obtained from: TrustedBSD Project
2000-10-19 07:53:59 +00:00
dac_granted |= VADMIN;
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
if (file_mode & S_IXUSR)
dac_granted |= VEXEC;
if (file_mode & S_IRUSR)
dac_granted |= VREAD;
if (file_mode & S_IWUSR)
Teach discretionary access control methods for files about VAPPEND and VALLPERM. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-22 03:57:07 +00:00
dac_granted |= (VWRITE | VAPPEND);
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & dac_granted) == accmode)
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
return (0);
goto privcheck;
}
/* Otherwise, check the groups (first match) */
if (groupmember(file_gid, cred)) {
if (file_mode & S_IXGRP)
dac_granted |= VEXEC;
if (file_mode & S_IRGRP)
dac_granted |= VREAD;
if (file_mode & S_IWGRP)
Teach discretionary access control methods for files about VAPPEND and VALLPERM. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-22 03:57:07 +00:00
dac_granted |= (VWRITE | VAPPEND);
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & dac_granted) == accmode)
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
return (0);
goto privcheck;
}
/* Otherwise, check everyone else. */
if (file_mode & S_IXOTH)
dac_granted |= VEXEC;
if (file_mode & S_IROTH)
dac_granted |= VREAD;
if (file_mode & S_IWOTH)
Teach discretionary access control methods for files about VAPPEND and VALLPERM. Obtained from: TrustedBSD Project Sponsored by: DARPA, NAI Labs
2002-07-22 03:57:07 +00:00
dac_granted |= (VWRITE | VAPPEND);
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & dac_granted) == accmode)
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
return (0);
privcheck:
/*
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
* Build a privilege mask to determine if the set of privileges
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
* satisfies the requirements when combined with the granted mask
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
* from above. For each privilege, if the privilege is required,
* bitwise or the request type onto the priv_granted mask.
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
*/
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted = 0;
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
if (type == VDIR) {
/*
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
* For directories, use PRIV_VFS_LOOKUP to satisfy VEXEC
* requests, instead of PRIV_VFS_EXEC.
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
*/
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & VEXEC) && ((dac_granted & VEXEC) == 0) &&
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
!priv_check_cred(cred, PRIV_VFS_LOOKUP, 0))
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted |= VEXEC;
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
} else {
execve(2) has a special check for file permissions: a file must have at least one execute bit set, otherwise execve(2) will return EACCES even for an user with PRIV_VFS_EXEC privilege. Add the check also to vaccess(9), vaccess_acl_nfs4(9) and vaccess_acl_posix1e(9). This makes access(2) to better agree with execve(2). Because ZFS doesn't use vaccess(9) for VEXEC, add the check to zfs_freebsd_access() too. There may be other file systems which are not using vaccess*() functions and need to be handled separately. PR: kern/125009 Reviewed by: bde, trasz Approved by: pjd (ZFS part)
2010-08-30 16:30:18 +00:00
/*
* Ensure that at least one execute bit is on. Otherwise,
* a privileged user will always succeed, and we don't want
* this to happen unless the file really is executable.
*/
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & VEXEC) && ((dac_granted & VEXEC) == 0) &&
execve(2) has a special check for file permissions: a file must have at least one execute bit set, otherwise execve(2) will return EACCES even for an user with PRIV_VFS_EXEC privilege. Add the check also to vaccess(9), vaccess_acl_nfs4(9) and vaccess_acl_posix1e(9). This makes access(2) to better agree with execve(2). Because ZFS doesn't use vaccess(9) for VEXEC, add the check to zfs_freebsd_access() too. There may be other file systems which are not using vaccess*() functions and need to be handled separately. PR: kern/125009 Reviewed by: bde, trasz Approved by: pjd (ZFS part)
2010-08-30 16:30:18 +00:00
(file_mode & (S_IXUSR | S_IXGRP | S_IXOTH)) != 0 &&
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
!priv_check_cred(cred, PRIV_VFS_EXEC, 0))
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted |= VEXEC;
Merge from POSIX.1e Capabilities development tree: o POSIX.1e capabilities authorize overriding of VEXEC for VDIR based on CAP_DAC_READ_SEARCH, but of !VDIR based on CAP_DAC_EXECUTE. Add appropriate conditionals to vaccess() to take that into account. o Synchronization cap_check_xxx() -> cap_check() change. Obtained from: TrustedBSD Project
2001-11-02 15:16:59 +00:00
}
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & VREAD) && ((dac_granted & VREAD) == 0) &&
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
!priv_check_cred(cred, PRIV_VFS_READ, 0))
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted |= VREAD;
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & VWRITE) && ((dac_granted & VWRITE) == 0) &&
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
!priv_check_cred(cred, PRIV_VFS_WRITE, 0))
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted |= (VWRITE | VAPPEND);
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & VADMIN) && ((dac_granted & VADMIN) == 0) &&
Eliminate now-unused SUSER_ALLOWJAIL arguments to priv_check_cred(); in some cases, move to priv_check() if it was an operation on a thread and no other flags were present. Eliminate caller-side jail exception checking (also now-unused); jail privilege exception code now goes solely in kern_jail.c. We can't yet eliminate suser() due to some cases in the KAME code where a privilege check is performed and then used in many different deferred paths. Do, however, move those prototypes to priv.h. Reviewed by: csjp Obtained from: TrustedBSD Project
2007-06-12 00:12:01 +00:00
!priv_check_cred(cred, PRIV_VFS_ADMIN, 0))
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
priv_granted |= VADMIN;
o Introduce new VOP_ACCESS() flag VADMIN, allowing file systems to perform "administrative" authorization checks. In most cases, the VADMIN test checks to make sure the credential effective uid is the same as the file owner. o Modify vaccess() to set VADMIN as an available right if the uid is appropriate. o Modify references to uid-based access control operations such that they now always invoke VOP_ACCESS() instead of using hard-coded policy checks. o This allows alternative UFS policies to be implemented by replacing only ufs_access() (such as mandatory system policies). o VOP_ACCESS() requires the caller to hold an exclusive vnode lock on the vnode: I believe that new invocations of VOP_ACCESS() are always called with the lock held. o Some direct checks of the uid remain, largely associated with the QUOTA and SUIDDIR code. Reviewed by: eivind Obtained from: TrustedBSD Project
2000-10-19 07:53:59 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
if ((accmode & (priv_granted | dac_granted)) == accmode) {
o Restructure vaccess() so as to check for DAC permission to modify the object before falling back on privilege. Make vaccess() accept an additional optional argument, privused, to determine whether privilege was required for vaccess() to return 0. Add commented out capability checks for reference. Rename some variables to make it more clear which modes/uids/etc are associated with the object, and which with the access mode. o Update file system use of vaccess() to pass NULL as the optional privused argument. Once additional patches are applied, suser() will no longer set ASU, so privused will permit passing of privilege information up the stack to the caller. Reviewed by: bde, green, phk, -security, others Obtained from: TrustedBSD Project
2000-08-29 14:45:49 +00:00
/* XXX audit: privilege used */
if (privused != NULL)
*privused = 1;
return (0);
}
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
return ((accmode & VADMIN) ? EPERM : EACCES);
Centralize the canonical vop_access user/group/other check in vaccess(). Discussed with: bde
2000-08-20 08:36:26 +00:00
}
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
/*
* Credential check based on process requesting service, and per-attribute
* permissions.
*/
int
Convert remaining functions in vfs_subr.c from K&R prototypes to ANSI C prototypes, as the majority of new functions added have been in this style. Changing prototype style now results in gcc noticing that the implementation of vn_pollrecord() has a 'short' argument instead of 'int' as prototyped in vnode.h, so correct that definition. In practice this didn't matter as only poll flags in the lower 16 bits are used. MFC after: 1 week
2006-01-21 19:42:10 +00:00
extattr_check_cred(struct vnode *vp, int attrnamespace, struct ucred *cred,
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
struct thread *td, accmode_t accmode)
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
{
/*
* Kernel-invoked always succeeds.
*/
Fix an inherited style bug: compare with NOCRED instead of NULL. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:46:19 +00:00
if (cred == NOCRED)
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
return (0);
/*
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
* Do not allow privileged processes in jail to directly manipulate
* system attributes.
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
*/
switch (attrnamespace) {
case EXTATTR_NAMESPACE_SYSTEM:
/* Potentially should be: return (EPERM); */
Sweep kernel replacing suser(9) calls with priv(9) calls, assigning specific privilege names to a broad range of privileges. These may require some future tweaking. Sponsored by: nCircle Network Security, Inc. Obtained from: TrustedBSD Project Discussed on: arch@ Reviewed (at least in part) by: mlaier, jmg, pjd, bde, ceri, Alex Lyashkov <umka at sevcity dot net>, Skip Ford <skip dot ford at verizon dot net>, Antoine Brodin <antoine dot brodin at laposte dot net>
2006-11-06 13:42:10 +00:00
return (priv_check_cred(cred, PRIV_VFS_EXTATTR_SYSTEM, 0));
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
case EXTATTR_NAMESPACE_USER:
Introduce accmode_t. This is required for NFSv4 ACLs - it will be neccessary to add more V* constants, and the variables changed by this patch were often being assigned to mode_t variables, which is 16 bit. Approved by: rwatson (mentor)
2008-10-28 13:44:11 +00:00
return (VOP_ACCESS(vp, accmode, cred, td));
Introduce new extattr_check_cred() function which implements the canonical crential washing for extended attributes. Sponsored by: DARPA & NAI Labs.
2002-09-05 20:38:57 +00:00
default:
return (EPERM);
}
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
#ifdef DEBUG_VFS_LOCKS
/*
sys/kern: spelling fixes in comments. No functional change.
2016-04-29 22:15:33 +00:00
* This only exists to suppress warnings from unlocked specfs accesses. It is
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
* no longer ok to have an unlocked VFS.
*/
- Move vp test for beeing NULL under IGNORE_LOCK(). - Check if panicstr isn't set, if it is ignore the lock. This helps to avoid confusion, because lockmgr is a no-op when panicstr isn't NULL, so asserting anything at this point doesn't make sense and can just race with other panic. Discussed with: kib
2008-07-27 11:46:42 +00:00
#define IGNORE_LOCK(vp) (panicstr != NULL || (vp) == NULL || \
(vp)->v_type == VCHR || (vp)->v_type == VBAD)
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
int vfs_badlock_ddb = 1; /* Drop into debugger on violation. */
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_ddb, CTLFLAG_RW, &vfs_badlock_ddb, 0,
"Drop into debugger on lock violation");
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
More style fixes. Obtained from: bde
2004-01-05 23:40:46 +00:00
int vfs_badlock_mutex = 1; /* Check for interlock across VOPs. */
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_mutex, CTLFLAG_RW, &vfs_badlock_mutex,
0, "Check for interlock across VOPs");
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
int vfs_badlock_print = 1; /* Print lock violations. */
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_print, CTLFLAG_RW, &vfs_badlock_print,
0, "Print lock violations");
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
Print vnode details when vnode locking assertion gets triggered. MFC after: 1 month
2016-08-12 22:20:52 +00:00
int vfs_badlock_vnode = 1; /* Print vnode details on lock violations. */
SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_vnode, CTLFLAG_RW, &vfs_badlock_vnode,
0, "Print vnode details on lock violations");
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
#ifdef KDB
int vfs_badlock_backtrace = 1; /* Print backtrace at lock violations. */
Fix some more style(9) issues.
2010-11-14 16:10:15 +00:00
SYSCTL_INT(_debug, OID_AUTO, vfs_badlock_backtrace, CTLFLAG_RW,
&vfs_badlock_backtrace, 0, "Print backtrace at lock violations");
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
#endif
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
static void
vfs_badlock(const char *msg, const char *str, struct vnode *vp)
{
put several of the options for DEBUG_VFS_LOCKS under control of sysctls.
2004-07-21 07:13:14 +00:00
#ifdef KDB
if (vfs_badlock_backtrace)
kdb_backtrace();
#endif
Print vnode details when vnode locking assertion gets triggered. MFC after: 1 month
2016-08-12 22:20:52 +00:00
if (vfs_badlock_vnode)
vn_printf(vp, "vnode ");
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
if (vfs_badlock_print)
printf("%s: %p %s\n", str, (void *)vp, msg);
if (vfs_badlock_ddb)
Add a new 'why' argument to kdb_enter(), and a set of constants to use for that argument. This will allow DDB to detect the broad category of reason why the debugger has been entered, which it can use for the purposes of deciding which DDB script to run. Assign approximate why values to all current consumers of the kdb_enter() interface.
2007-12-25 17:52:02 +00:00
kdb_enter(KDB_WHY_VFSLOCK, "lock violation");
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
void
assert_vi_locked(struct vnode *vp, const char *str)
{
if (vfs_badlock_mutex && !mtx_owned(VI_MTX(vp)))
vfs_badlock("interlock is not locked but should be", str, vp);
}
void
assert_vi_unlocked(struct vnode *vp, const char *str)
{
if (vfs_badlock_mutex && mtx_owned(VI_MTX(vp)))
vfs_badlock("interlock is locked but should not be", str, vp);
}
void
assert_vop_locked(struct vnode *vp, const char *str)
{
assert_vop_locked: make the assertion race-free and more efficient this is really a minor improvement for the sake of correctness MFC after: 6 days
2012-11-24 13:11:47 +00:00
int locked;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
assert_vop_locked: make the assertion race-free and more efficient this is really a minor improvement for the sake of correctness MFC after: 6 days
2012-11-24 13:11:47 +00:00
if (!IGNORE_LOCK(vp)) {
locked = VOP_ISLOCKED(vp);
if (locked == 0 || locked == LK_EXCLOTHER)
vfs_badlock("is not locked but should be", str, vp);
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
void
assert_vop_unlocked(struct vnode *vp, const char *str)
{
- Move vp test for beeing NULL under IGNORE_LOCK(). - Check if panicstr isn't set, if it is ignore the lock. This helps to avoid confusion, because lockmgr is a no-op when panicstr isn't NULL, so asserting anything at this point doesn't make sense and can just race with other panic. Discussed with: kib
2008-07-27 11:46:42 +00:00
if (!IGNORE_LOCK(vp) && VOP_ISLOCKED(vp) == LK_EXCLUSIVE)
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
vfs_badlock("is locked but should not be", str, vp);
}
void
assert_vop_elocked(struct vnode *vp, const char *str)
{
- Move vp test for beeing NULL under IGNORE_LOCK(). - Check if panicstr isn't set, if it is ignore the lock. This helps to avoid confusion, because lockmgr is a no-op when panicstr isn't NULL, so asserting anything at this point doesn't make sense and can just race with other panic. Discussed with: kib
2008-07-27 11:46:42 +00:00
if (!IGNORE_LOCK(vp) && VOP_ISLOCKED(vp) != LK_EXCLUSIVE)
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
vfs_badlock("is not exclusive locked but should be", str, vp);
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
#endif /* DEBUG_VFS_LOCKS */
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
Add function vop_rename_fail(9) that performs needed cleanup for locks and references of the VOP_RENAME(9) arguments. Use vop_rename_fail() in deadfs_rename(). Tested by: Mikolaj Golub MFC after: 1 week
2010-04-02 14:03:01 +00:00
void
vop_rename_fail(struct vop_rename_args *ap)
{
if (ap->a_tvp != NULL)
vput(ap->a_tvp);
if (ap->a_tdvp == ap->a_tvp)
vrele(ap->a_tdvp);
else
vput(ap->a_tdvp);
vrele(ap->a_fdvp);
vrele(ap->a_fvp);
}
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
void
vop_rename_pre(void *ap)
{
struct vop_rename_args *a = ap;
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
#ifdef DEBUG_VFS_LOCKS
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
if (a->a_tvp)
ASSERT_VI_UNLOCKED(a->a_tvp, "VOP_RENAME");
ASSERT_VI_UNLOCKED(a->a_tdvp, "VOP_RENAME");
ASSERT_VI_UNLOCKED(a->a_fvp, "VOP_RENAME");
ASSERT_VI_UNLOCKED(a->a_fdvp, "VOP_RENAME");
/* Check the source (from). */
Sometimes vnodes share the lock despite being different vnodes on different mount points, e.g. the nullfs vnode and the covered vnode from the lower filesystem. In this case, existing assertion in vop_rename_pre() may be triggered. Check for vnode locks equiality instead of the vnodes itself to not trip over the situation. Submitted by: Mikolaj Golub <to.my.trociny@gmail.com> Tested by: pho MFC after: 2 weeks
2010-06-03 10:20:08 +00:00
if (a->a_tdvp->v_vnlock != a->a_fdvp->v_vnlock &&
(a->a_tvp == NULL || a->a_tvp->v_vnlock != a->a_fdvp->v_vnlock))
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
ASSERT_VOP_UNLOCKED(a->a_fdvp, "vop_rename: fdvp locked");
Sometimes vnodes share the lock despite being different vnodes on different mount points, e.g. the nullfs vnode and the covered vnode from the lower filesystem. In this case, existing assertion in vop_rename_pre() may be triggered. Check for vnode locks equiality instead of the vnodes itself to not trip over the situation. Submitted by: Mikolaj Golub <to.my.trociny@gmail.com> Tested by: pho MFC after: 2 weeks
2010-06-03 10:20:08 +00:00
if (a->a_tvp == NULL || a->a_tvp->v_vnlock != a->a_fvp->v_vnlock)
Typo, 'from' vnode is locked here, not 'to' vnode.
2006-11-04 23:57:02 +00:00
ASSERT_VOP_UNLOCKED(a->a_fvp, "vop_rename: fvp locked");
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
/* Check the target. */
if (a->a_tvp)
ASSERT_VOP_LOCKED(a->a_tvp, "vop_rename: tvp not locked");
ASSERT_VOP_LOCKED(a->a_tdvp, "vop_rename: tdvp not locked");
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
#endif
if (a->a_tdvp != a->a_fdvp)
Fix a typo in vop_rename_pre() where we ended up using vholdl() instead of vhold(), even though the vnode interlock is unlocked. MFC after: 3 days
2005-08-28 23:00:11 +00:00
vhold(a->a_fdvp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (a->a_tvp != a->a_fvp)
vhold(a->a_fvp);
vhold(a->a_tdvp);
if (a->a_tvp)
vhold(a->a_tvp);
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
vfs: ifdef out noop vop_* primitives on !DEBUG_VFS_LOCKS kernels This removes calls to empty functions like vop_lock_{pre/post} from common vfs routines. Approved by: re (gjb)
2016-06-17 19:41:30 +00:00
#ifdef DEBUG_VFS_LOCKS
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
void
vop_strategy_pre(void *ap)
{
More style fixes. Obtained from: bde
2004-01-05 23:40:46 +00:00
struct vop_strategy_args *a;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
struct buf *bp;
More style fixes. Obtained from: bde
2004-01-05 23:40:46 +00:00
a = ap;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
bp = a->a_bp;
/*
* Cluster ops lock their component buffers but not the IO container.
*/
if ((bp->b_flags & B_CLUSTER) != 0)
return;
Do not assert buffer lock in VFS_STRATEGY() when kernel already paniced. Sponsored by: The FreeBSD Foundation MFC after: 1 week
2011-03-08 11:50:59 +00:00
if (panicstr == NULL && !BUF_ISLOCKED(bp)) {
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
if (vfs_badlock_print)
printf(
More style fixes. Obtained from: bde
2004-01-05 23:40:46 +00:00
"VOP_STRATEGY: bp is not locked but should be\n");
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
if (vfs_badlock_ddb)
Add a new 'why' argument to kdb_enter(), and a set of constants to use for that argument. This will allow DDB to detect the broad category of reason why the debugger has been entered, which it can use for the purposes of deciding which DDB script to run. Assign approximate why values to all current consumers of the kdb_enter() interface.
2007-12-25 17:52:02 +00:00
kdb_enter(KDB_WHY_VFSLOCK, "lock violation");
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
}
void
vop_lock_pre(void *ap)
{
Since renaming of vop_lock to _vop_lock, pre- and post-condition function calls are no more generated for vop_lock. Rename _vop_lock to vop_lock1 to satisfy tools/vnode_if.awk assumption about vop naming conventions. This restores pre/post-condition calls.
2007-05-18 13:02:13 +00:00
struct vop_lock1_args *a = ap;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
if ((a->a_flags & LK_INTERLOCK) == 0)
ASSERT_VI_UNLOCKED(a->a_vp, "VOP_LOCK");
else
ASSERT_VI_LOCKED(a->a_vp, "VOP_LOCK");
}
void
vop_lock_post(void *ap, int rc)
{
Since renaming of vop_lock to _vop_lock, pre- and post-condition function calls are no more generated for vop_lock. Rename _vop_lock to vop_lock1 to satisfy tools/vnode_if.awk assumption about vop naming conventions. This restores pre/post-condition calls.
2007-05-18 13:02:13 +00:00
struct vop_lock1_args *a = ap;
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
ASSERT_VI_UNLOCKED(a->a_vp, "VOP_LOCK");
Allow the vnode to be unlocked for the weird case of LK_EXCLOTHER. LK_EXCLOTHER is only used to acquire a usecount on a vnode during NFSv4 recovery from an expired lease. Reported and tested by: pho MFC after: 2 weeks
2013-04-16 14:22:16 +00:00
if (rc == 0 && (a->a_flags & LK_EXCLOTHER) == 0)
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
ASSERT_VOP_LOCKED(a->a_vp, "VOP_LOCK");
}
void
vop_unlock_pre(void *ap)
{
struct vop_unlock_args *a = ap;
if (a->a_flags & LK_INTERLOCK)
ASSERT_VI_LOCKED(a->a_vp, "VOP_UNLOCK");
ASSERT_VOP_LOCKED(a->a_vp, "VOP_UNLOCK");
}
void
vop_unlock_post(void *ap, int rc)
{
struct vop_unlock_args *a = ap;
if (a->a_flags & LK_INTERLOCK)
ASSERT_VI_UNLOCKED(a->a_vp, "VOP_UNLOCK");
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
vfs: ifdef out noop vop_* primitives on !DEBUG_VFS_LOCKS kernels This removes calls to empty functions like vop_lock_{pre/post} from common vfs routines. Approved by: re (gjb)
2016-06-17 19:41:30 +00:00
#endif
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
void
vop_create_post(void *ap, int rc)
{
struct vop_create_args *a = ap;
if (!rc)
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
Add post-VOP hooks for VOP_DELETEEXTATTR() and VOP_SETEXTATTR() and use these to trigger a NOTE_ATTRIB EVFILT_VNODE kevent when the extended attributes of a vnode are changed. Note that OS X already implements this behavior. Reviewed by: rwatson MFC after: 2 weeks
2011-12-23 20:11:37 +00:00
void
vop_deleteextattr_post(void *ap, int rc)
{
Use proper argument structure types for the extattr post-VOP hooks. The wrong structure happened to work since the only argument used was the vnode which is in the same place in both VOP_SETATTR() and the two extattr VOPs. MFC after: 3 days
2012-01-06 20:05:48 +00:00
struct vop_deleteextattr_args *a = ap;
Add post-VOP hooks for VOP_DELETEEXTATTR() and VOP_SETEXTATTR() and use these to trigger a NOTE_ATTRIB EVFILT_VNODE kevent when the extended attributes of a vnode are changed. Note that OS X already implements this behavior. Reviewed by: rwatson MFC after: 2 weeks
2011-12-23 20:11:37 +00:00
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_ATTRIB);
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
void
vop_link_post(void *ap, int rc)
{
struct vop_link_args *a = ap;
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (!rc) {
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
VFS_KNOTE_LOCKED(a->a_vp, NOTE_LINK);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_tdvp, NOTE_WRITE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
}
void
vop_mkdir_post(void *ap, int rc)
{
struct vop_mkdir_args *a = ap;
if (!rc)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE | NOTE_LINK);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
void
vop_mknod_post(void *ap, int rc)
{
struct vop_mknod_args *a = ap;
if (!rc)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
kevent(2): Note DOOMED vnodes with NOTE_REVOKE In poll mode, check for and wake VBAD vnodes. (Vnodes that are VBAD at registration will never be woken by the RECLAIM trigger.) Add post-VOP_RECLAIM hook to trigger notes on vnode reclamation. (Vnodes that were fine at registration but are vgoned while being monitored should signal waiters.) Reviewed by: kib Approved by: markj (mentor) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3675
2015-09-15 20:22:30 +00:00
void
vop_reclaim_post(void *ap, int rc)
{
struct vop_reclaim_args *a = ap;
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_REVOKE);
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
void
vop_remove_post(void *ap, int rc)
{
struct vop_remove_args *a = ap;
if (!rc) {
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE);
VFS_KNOTE_LOCKED(a->a_vp, NOTE_DELETE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
}
void
vop_rename_post(void *ap, int rc)
{
struct vop_rename_args *a = ap;
Fix reporting of NOTE_LINK when directory link count changes due to rename removing or adding subdirectory entry. Discussed with and tested by: Vladimir Kondratyev <wulf@cicgroup.ru> NetBSD PR: 48958 (http://gnats.netbsd.org/48958) MFC after: 2 weeks Sponsored by: The FreeBSD Foundation
2016-05-02 13:13:32 +00:00
long hint;
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (!rc) {
Fix reporting of NOTE_LINK when directory link count changes due to rename removing or adding subdirectory entry. Discussed with and tested by: Vladimir Kondratyev <wulf@cicgroup.ru> NetBSD PR: 48958 (http://gnats.netbsd.org/48958) MFC after: 2 weeks Sponsored by: The FreeBSD Foundation
2016-05-02 13:13:32 +00:00
hint = NOTE_WRITE;
if (a->a_fdvp == a->a_tdvp) {
if (a->a_tvp != NULL && a->a_tvp->v_type == VDIR)
hint |= NOTE_LINK;
VFS_KNOTE_UNLOCKED(a->a_fdvp, hint);
VFS_KNOTE_UNLOCKED(a->a_tdvp, hint);
} else {
Issue NOTE_EXTEND when a directory entry is added to or removed from the monitored directory as the result of rename(2) operation. The renames staying in the directory are not reported. Submitted by: Vladimir Kondratyev <wulf@cicgroup.ru> MFC after: 2 weeks
2016-05-02 13:18:17 +00:00
hint |= NOTE_EXTEND;
Fix reporting of NOTE_LINK when directory link count changes due to rename removing or adding subdirectory entry. Discussed with and tested by: Vladimir Kondratyev <wulf@cicgroup.ru> NetBSD PR: 48958 (http://gnats.netbsd.org/48958) MFC after: 2 weeks Sponsored by: The FreeBSD Foundation
2016-05-02 13:13:32 +00:00
if (a->a_fvp->v_type == VDIR)
hint |= NOTE_LINK;
VFS_KNOTE_UNLOCKED(a->a_fdvp, hint);
if (a->a_fvp->v_type == VDIR && a->a_tvp != NULL &&
a->a_tvp->v_type == VDIR)
hint &= ~NOTE_LINK;
VFS_KNOTE_UNLOCKED(a->a_tdvp, hint);
}
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_UNLOCKED(a->a_fvp, NOTE_RENAME);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (a->a_tvp)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_UNLOCKED(a->a_tvp, NOTE_DELETE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
if (a->a_tdvp != a->a_fdvp)
vdrop(a->a_fdvp);
if (a->a_tvp != a->a_fvp)
vdrop(a->a_fvp);
vdrop(a->a_tdvp);
if (a->a_tvp)
vdrop(a->a_tvp);
}
void
vop_rmdir_post(void *ap, int rc)
{
struct vop_rmdir_args *a = ap;
if (!rc) {
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE | NOTE_LINK);
VFS_KNOTE_LOCKED(a->a_vp, NOTE_DELETE);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
}
void
vop_setattr_post(void *ap, int rc)
{
struct vop_setattr_args *a = ap;
if (!rc)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_vp, NOTE_ATTRIB);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
Add post-VOP hooks for VOP_DELETEEXTATTR() and VOP_SETEXTATTR() and use these to trigger a NOTE_ATTRIB EVFILT_VNODE kevent when the extended attributes of a vnode are changed. Note that OS X already implements this behavior. Reviewed by: rwatson MFC after: 2 weeks
2011-12-23 20:11:37 +00:00
void
vop_setextattr_post(void *ap, int rc)
{
Use proper argument structure types for the extattr post-VOP hooks. The wrong structure happened to work since the only argument used was the vnode which is in the same place in both VOP_SETATTR() and the two extattr VOPs. MFC after: 3 days
2012-01-06 20:05:48 +00:00
struct vop_setextattr_args *a = ap;
Add post-VOP hooks for VOP_DELETEEXTATTR() and VOP_SETEXTATTR() and use these to trigger a NOTE_ATTRIB EVFILT_VNODE kevent when the extended attributes of a vnode are changed. Note that OS X already implements this behavior. Reviewed by: rwatson MFC after: 2 weeks
2011-12-23 20:11:37 +00:00
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_ATTRIB);
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
void
vop_symlink_post(void *ap, int rc)
{
struct vop_symlink_args *a = ap;
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (!rc)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
VFS_KNOTE_LOCKED(a->a_dvp, NOTE_WRITE);
style(9): Add empty line before first code line in functions with no local variables. Properly terminate comment sentences. Indent lines which are longer that 80 characters. Move v_addpollinfo closer to the rest of poll-related functions. Move DEBUG_VFS_LOCKS ifdefed block to the end of file. Obtained from: bde (partly)
2004-01-05 19:04:29 +00:00
}
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
Add EVFILT_VNODE open, read and close notifications. While there, order EVFILT_VNODE notes descriptions alphabetically. Based on submission, and tested by: Vladimir Kondratyev <wulf@cicgroup.ru> MFC after: 2 weeks
2016-05-03 15:17:43 +00:00
void
vop_open_post(void *ap, int rc)
{
struct vop_open_args *a = ap;
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_OPEN);
}
void
vop_close_post(void *ap, int rc)
{
struct vop_close_args *a = ap;
if (!rc && (a->a_cred != NOCRED || /* filter out revokes */
(a->a_vp->v_iflag & VI_DOOMED) == 0)) {
VFS_KNOTE_LOCKED(a->a_vp, (a->a_fflag & FWRITE) != 0 ?
NOTE_CLOSE_WRITE : NOTE_CLOSE);
}
}
void
vop_read_post(void *ap, int rc)
{
struct vop_read_args *a = ap;
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_READ);
}
void
vop_readdir_post(void *ap, int rc)
{
struct vop_readdir_args *a = ap;
if (!rc)
VFS_KNOTE_LOCKED(a->a_vp, NOTE_READ);
}
Add locking to the kqueue subsystem. This also makes the kqueue subsystem a more complete subsystem, and removes the knowlege of how things are implemented from the drivers. Include locking around filter ops, so a module like aio will know when not to be unloaded if there are outstanding knotes using it's filter ops. Currently, it uses the MTX_DUPOK even though it is not always safe to aquire duplicate locks. Witness currently doesn't support the ability to discover if a dup lock is ok (in some cases). Reviewed by: green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
static struct knlist fs_knlist;
static void
vfs_event_init(void *arg)
{
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
knlist_init_mtx(&fs_knlist, NULL);
Add locking to the kqueue subsystem. This also makes the kqueue subsystem a more complete subsystem, and removes the knowlege of how things are implemented from the drivers. Include locking around filter ops, so a module like aio will know when not to be unloaded if there are outstanding knotes using it's filter ops. Currently, it uses the MTX_DUPOK even though it is not always safe to aquire duplicate locks. Witness currently doesn't support the ability to discover if a dup lock is ok (in some cases). Reviewed by: green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
}
/* XXX - correct order? */
SYSINIT(vfs_knlist, SI_SUB_VFS, SI_ORDER_ANY, vfs_event_init, NULL);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
void
Use ISO C99 integer types in sys/kern where possible. There are only about 100 occurences of the BSD-specific u_int*_t datatypes in sys/kern. The ISO C99 integer types are used here more often.
2010-06-21 09:55:56 +00:00
vfs_event_signal(fsid_t *fsid, uint32_t event, intptr_t data __unused)
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
{
Add locking to the kqueue subsystem. This also makes the kqueue subsystem a more complete subsystem, and removes the knowlege of how things are implemented from the drivers. Include locking around filter ops, so a module like aio will know when not to be unloaded if there are outstanding knotes using it's filter ops. Currently, it uses the MTX_DUPOK even though it is not always safe to aquire duplicate locks. Witness currently doesn't support the ability to discover if a dup lock is ok (in some cases). Reviewed by: green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
KNOTE_UNLOCKED(&fs_knlist, event);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
}
static int filt_fsattach(struct knote *kn);
static void filt_fsdetach(struct knote *kn);
static int filt_fsevent(struct knote *kn, long hint);
Use C99 initialization for struct filterops. Obtained from: Mac OS X Sponsored by: Apple Inc. MFC after: 3 weeks
2009-09-12 20:03:45 +00:00
struct filterops fs_filtops = {
.f_isfd = 0,
.f_attach = filt_fsattach,
.f_detach = filt_fsdetach,
.f_event = filt_fsevent
};
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
static int
filt_fsattach(struct knote *kn)
{
kn->kn_flags |= EV_CLEAR;
Add locking to the kqueue subsystem. This also makes the kqueue subsystem a more complete subsystem, and removes the knowlege of how things are implemented from the drivers. Include locking around filter ops, so a module like aio will know when not to be unloaded if there are outstanding knotes using it's filter ops. Currently, it uses the MTX_DUPOK even though it is not always safe to aquire duplicate locks. Witness currently doesn't support the ability to discover if a dup lock is ok (in some cases). Reviewed by: green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
knlist_add(&fs_knlist, kn, 0);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
return (0);
}
static void
filt_fsdetach(struct knote *kn)
{
Add locking to the kqueue subsystem. This also makes the kqueue subsystem a more complete subsystem, and removes the knowlege of how things are implemented from the drivers. Include locking around filter ops, so a module like aio will know when not to be unloaded if there are outstanding knotes using it's filter ops. Currently, it uses the MTX_DUPOK even though it is not always safe to aquire duplicate locks. Witness currently doesn't support the ability to discover if a dup lock is ok (in some cases). Reviewed by: green, rwatson (both earlier versions)
2004-08-15 06:24:42 +00:00
knlist_remove(&fs_knlist, kn, 0);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
}
static int
filt_fsevent(struct knote *kn, long hint)
{
kn->kn_fflags |= hint;
return (kn->kn_fflags != 0);
}
static int
sysctl_vfs_ctl(SYSCTL_HANDLER_ARGS)
{
struct vfsidctl vc;
int error;
struct mount *mp;
error = SYSCTL_IN(req, &vc, sizeof(vc));
if (error)
return (error);
Pass the operation in with the fsidctl. Remove some fsidctls that we will not be using. Correct prototypes for fs sysctls.
2004-07-04 20:21:58 +00:00
if (vc.vc_vers != VFS_CTL_VERS1)
return (EINVAL);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
mp = vfs_getvfs(&vc.vc_fsid);
if (mp == NULL)
return (ENOENT);
Pass the operation in with the fsidctl. Remove some fsidctls that we will not be using. Correct prototypes for fs sysctls.
2004-07-04 20:21:58 +00:00
/* ensure that a specific sysctl goes to the right filesystem. */
if (strcmp(vc.vc_fstypename, "*") != 0 &&
strcmp(vc.vc_fstypename, mp->mnt_vfc->vfc_name) != 0) {
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
vfs_rel(mp);
Pass the operation in with the fsidctl. Remove some fsidctls that we will not be using. Correct prototypes for fs sysctls.
2004-07-04 20:21:58 +00:00
return (EINVAL);
}
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
VCTLTOREQ(&vc, req);
- Hold a reference from the time vfs_busy starts until vfs_unbusy is called. - vfs_getvfs has to return a reference to prevent the returned mountpoint from changing identities. - Release references acquired via vfs_getvfs. Discussed with: tegge Tested by: kris Sponsored by: Isilon Systems, Inc.
2006-03-31 03:53:25 +00:00
error = VFS_SYSCTL(mp, vc.vc_op, req);
vfs_rel(mp);
return (error);
Introduce a new kevent filter. EVFILT_FS that will be used to signal generic filesystem events to userspace. Currently only mount and unmount of filesystems are signalled. Soon to be added, up/down status of NFS. Introduce a sysctl node used to route requests to/from filesystems based on filesystem ids. Introduce a new vfsop, vfs_sysctl(mp, req) that is used as the callback/ entrypoint by the sysctl code to change individual filesystems.
2004-07-04 10:52:54 +00:00
}
Specify a CTLTYPE_FOO so that a future sysctl(8) change does not need to rely on the format string.
2011-01-18 21:14:18 +00:00
SYSCTL_PROC(_vfs, OID_AUTO, ctl, CTLTYPE_OPAQUE | CTLFLAG_WR,
NULL, 0, sysctl_vfs_ctl, "",
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
"Sysctl by fsid");
Create simple function init_va_filerev() for initializing a va_filerev field. Replace three instances of longhaired initialization va_filerev fields. Added XXX comment wondering why we don't use random bits instead of uptime of the system for this purpose.
2004-09-07 09:17:05 +00:00
/*
* Function to initialize a va_filerev field sensibly.
* XXX: Wouldn't a random number make a lot more sense ??
*/
u_quad_t
init_va_filerev(void)
{
struct bintime bt;
getbinuptime(&bt);
return (((u_quad_t)bt.sec << 32LL) | (bt.frac >> 32LL));
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
static int filt_vfsread(struct knote *kn, long hint);
static int filt_vfswrite(struct knote *kn, long hint);
static int filt_vfsvnode(struct knote *kn, long hint);
static void filt_vfsdetach(struct knote *kn);
Use C99 initialization for struct filterops. Obtained from: Mac OS X Sponsored by: Apple Inc. MFC after: 3 weeks
2009-09-12 20:03:45 +00:00
static struct filterops vfsread_filtops = {
.f_isfd = 1,
.f_detach = filt_vfsdetach,
.f_event = filt_vfsread
};
static struct filterops vfswrite_filtops = {
.f_isfd = 1,
.f_detach = filt_vfsdetach,
.f_event = filt_vfswrite
};
static struct filterops vfsvnode_filtops = {
.f_isfd = 1,
.f_detach = filt_vfsdetach,
.f_event = filt_vfsvnode
};
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
static void
vfs_knllock(void *arg)
{
struct vnode *vp = arg;
vn_lock() is currently only used with the 'curthread' passed as argument. Remove this argument and pass curthread directly to underlying VOP_LOCK1() VFS method. This modify makes the code cleaner and in particular remove an annoying dependence helping next lockmgr() cleanup. KPI results, obviously, changed. Manpage and FreeBSD_version will be updated through further commits. As a side note, would be valuable to say that next commits will address a similar cleanup about VFS methods, in particular vop_lock1 and vop_unlock. Tested by: Diego Sardina <siarodx at gmail dot com>, Andrea Di Pasquale <whyx dot it at gmail dot com>
2008-01-10 01:10:58 +00:00
vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
}
static void
vfs_knlunlock(void *arg)
{
struct vnode *vp = arg;
VOP_LOCK1() (and so VOP_LOCK()) and VOP_UNLOCK() are only used in conjuction with 'thread' argument passing which is always curthread. Remove the unuseful extra-argument and pass explicitly curthread to lower layer functions, when necessary. KPI results broken by this change, which should affect several ports, so version bumping and manpage update will be further committed. Tested by: kris, pho, Diego Sardina <siarodx at gmail dot com>
2008-01-13 14:44:15 +00:00
VOP_UNLOCK(vp, 0);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
}
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
static void
vfs_knl_assert_locked(void *arg)
{
#ifdef DEBUG_VFS_LOCKS
struct vnode *vp = arg;
ASSERT_VOP_LOCKED(vp, "vfs_knl_assert_locked");
#endif
}
static void
vfs_knl_assert_unlocked(void *arg)
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
{
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
#ifdef DEBUG_VFS_LOCKS
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
struct vnode *vp = arg;
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
ASSERT_VOP_UNLOCKED(vp, "vfs_knl_assert_unlocked");
#endif
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
}
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
int
vfs_kqfilter(struct vop_kqfilter_args *ap)
{
struct vnode *vp = ap->a_vp;
struct knote *kn = ap->a_kn;
Minor style cleanups (mostly removal of trailing whitespaces).
2007-04-10 15:29:37 +00:00
struct knlist *knl;
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
switch (kn->kn_filter) {
case EVFILT_READ:
kn->kn_fop = &vfsread_filtops;
break;
case EVFILT_WRITE:
kn->kn_fop = &vfswrite_filtops;
break;
case EVFILT_VNODE:
kn->kn_fop = &vfsvnode_filtops;
break;
default:
In vfs_kqfilter(), return EINVAL instead of 1 (EPERM) when an unsupported kqueue filter type is requested on a vnode. MFC after: 3 days
2005-09-12 19:22:37 +00:00
return (EINVAL);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
kn->kn_hook = (caddr_t)vp;
Protect check for v_pollinfo == NULL and assignment of the newly allocated vpollinfo with vnode interlock. Fully initialize vpollinfo before putting pointer to it into vp->v_pollinfo. Discussed with: dwhite Tested by: pho MFC after: 1 week
2008-10-28 12:08:36 +00:00
v_addpollinfo(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (vp->v_pollinfo == NULL)
return (ENOMEM);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
knl = &vp->v_pollinfo->vpi_selinfo.si_note;
Acquire a hold reference on the vnode when a knote is instantiated. Otherwise, knote keeps a pointer to a vnode which could become invalid any time. Reported by: many Tested by: Patrick Lamaiziere <patfbsd@davenulle.org> Discussed with: jmg Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (marius)
2013-09-26 13:14:51 +00:00
vhold(vp);
Fix the recent panics/LORs/hangs created by my kqueue commit by: - Introducing the possibility of using locks different than mutexes for the knlist locking. In order to do this, we add three arguments to knlist_init() to specify the functions to use to lock, unlock and check if the lock is owned. If these arguments are NULL, we assume mtx_lock, mtx_unlock and mtx_owned, respectively. - Using the vnode lock for the knlist locking, when doing kqueue operations on a vnode. This way, we don't have to lock the vnode while holding a mutex, in filt_vfsread. Reviewed by: jmg Approved by: re (scottl), scottl (mentor override) Pointyhat to: ssouhlal Will be happy: everyone
2005-07-01 16:28:32 +00:00
knlist_add(knl, kn, 0);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
return (0);
}
/*
* Detach knote from vnode
*/
static void
filt_vfsdetach(struct knote *kn)
{
struct vnode *vp = (struct vnode *)kn->kn_hook;
KASSERT(vp->v_pollinfo != NULL, ("Missing v_pollinfo"));
knlist_remove(&vp->v_pollinfo->vpi_selinfo.si_note, kn, 0);
Acquire a hold reference on the vnode when a knote is instantiated. Otherwise, knote keeps a pointer to a vnode which could become invalid any time. Reported by: many Tested by: Patrick Lamaiziere <patfbsd@davenulle.org> Discussed with: jmg Sponsored by: The FreeBSD Foundation MFC after: 1 week Approved by: re (marius)
2013-09-26 13:14:51 +00:00
vdrop(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
/*ARGSUSED*/
static int
filt_vfsread(struct knote *kn, long hint)
{
struct vnode *vp = (struct vnode *)kn->kn_hook;
struct vattr va;
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
int res;
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
/*
* filesystem is gone, so set the EOF flag and schedule
* the knote for deletion.
*/
kevent(2): Note DOOMED vnodes with NOTE_REVOKE In poll mode, check for and wake VBAD vnodes. (Vnodes that are VBAD at registration will never be woken by the RECLAIM trigger.) Add post-VOP_RECLAIM hook to trigger notes on vnode reclamation. (Vnodes that were fine at registration but are vgoned while being monitored should signal waiters.) Reviewed by: kib Approved by: markj (mentor) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3675
2015-09-15 20:22:30 +00:00
if (hint == NOTE_REVOKE || (hint == 0 && vp->v_type == VBAD)) {
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_LOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
kn->kn_flags |= (EV_EOF | EV_ONESHOT);
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_UNLOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
return (1);
}
Decontextualize the couplet VOP_GETATTR / VOP_SETATTR as the passed thread was always curthread and totally unuseful. Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-08-28 15:23:18 +00:00
if (VOP_GETATTR(vp, &va, curthread->td_ucred))
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
return (0);
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_LOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
kn->kn_data = va.va_size - kn->kn_fp->f_offset;
Make it possible to implement poll(2) on top of kqueue(2). It looks like EVFILT_READ and EVFILT_WRITE trigger under the same conditions as poll()'s POLLRDNORM and POLLWRNORM as described by POSIX. The only difference is that POLLRDNORM has to be triggered on regular files unconditionally, whereas EVFILT_READ only triggers when not EOF. Introduce a new flag, NOTE_FILE_POLL, that can be used to make EVFILT_READ and EVFILT_WRITE behave identically to poll(). This flag will be used by cloudlibc's poll() function. Reviewed by: jmg Differential Revision: https://reviews.freebsd.org/D3303
2015-08-05 07:34:29 +00:00
res = (kn->kn_sfflags & NOTE_FILE_POLL) != 0 || kn->kn_data != 0;
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_UNLOCK(vp);
return (res);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
/*ARGSUSED*/
static int
filt_vfswrite(struct knote *kn, long hint)
{
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
struct vnode *vp = (struct vnode *)kn->kn_hook;
VI_LOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
/*
* filesystem is gone, so set the EOF flag and schedule
* the knote for deletion.
*/
kevent(2): Note DOOMED vnodes with NOTE_REVOKE In poll mode, check for and wake VBAD vnodes. (Vnodes that are VBAD at registration will never be woken by the RECLAIM trigger.) Add post-VOP_RECLAIM hook to trigger notes on vnode reclamation. (Vnodes that were fine at registration but are vgoned while being monitored should signal waiters.) Reviewed by: kib Approved by: markj (mentor) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3675
2015-09-15 20:22:30 +00:00
if (hint == NOTE_REVOKE || (hint == 0 && vp->v_type == VBAD))
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
kn->kn_flags |= (EV_EOF | EV_ONESHOT);
kn->kn_data = 0;
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_UNLOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
return (1);
}
static int
filt_vfsvnode(struct knote *kn, long hint)
{
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
struct vnode *vp = (struct vnode *)kn->kn_hook;
int res;
VI_LOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
if (kn->kn_sfflags & hint)
kn->kn_fflags |= hint;
kevent(2): Note DOOMED vnodes with NOTE_REVOKE In poll mode, check for and wake VBAD vnodes. (Vnodes that are VBAD at registration will never be woken by the RECLAIM trigger.) Add post-VOP_RECLAIM hook to trigger notes on vnode reclamation. (Vnodes that were fine at registration but are vgoned while being monitored should signal waiters.) Reviewed by: kib Approved by: markj (mentor) Sponsored by: EMC / Isilon Storage Division Differential Revision: https://reviews.freebsd.org/D3675
2015-09-15 20:22:30 +00:00
if (hint == NOTE_REVOKE || (hint == 0 && vp->v_type == VBAD)) {
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
kn->kn_flags |= EV_EOF;
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
VI_UNLOCK(vp);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
return (1);
}
Adapt vfs kqfilter to the shared vnode lock used by zfs write vop. Use vnode interlock to protect the knote fields [1]. The locking assumes that shared vnode lock is held, thus we get exclusive access to knote either by exclusive vnode lock protection, or by shared vnode lock + vnode interlock. Do not use kl_locked() method to assert either lock ownership or the fact that curthread does not own the lock. For shared locks, ownership is not recorded, e.g. VOP_ISLOCKED can return LK_SHARED for the shared lock not owned by curthread, causing false positives in kqueue subsystem assertions about knlist lock. Remove kl_locked method from knlist lock vector, and add two separate assertion methods kl_assert_locked and kl_assert_unlocked, that are supposed to use proper asserts. Change knlist_init accordingly. Add convenience function knlist_init_mtx to reduce number of arguments for typical knlist initialization. Submitted by: jhb [1] Noted by: jhb [2] Reviewed by: jhb Tested by: rnoland
2009-06-10 20:59:32 +00:00
res = (kn->kn_fflags != 0);
VI_UNLOCK(vp);
return (res);
Allow EVFILT_VNODE events to work on every filesystem type, not just UFS by: - Making the pre and post hooks for the VOP functions work even when DEBUG_VFS_LOCKS is not defined. - Moving the KNOTE activations into the corresponding VOP hooks. - Creating a MNTK_NOKNOTE flag for the mnt_kern_flag field of struct mount that permits filesystems to disable the new behavior. - Creating a default VOP_KQFILTER function: vfs_kqfilter() My benchmarks have not revealed any performance degradation. Reviewed by: jeff, bde Approved by: rwatson, jmg (kqueue changes), grehan (mentor)
2005-06-09 20:20:31 +00:00
}
Introduce vfs_read_dirent() which can help VOP_READDIR() implementations by handling all the cookie stuff.
2005-09-12 08:46:07 +00:00
int
vfs_read_dirent(struct vop_readdir_args *ap, struct dirent *dp, off_t off)
{
int error;
if (dp->d_reclen > ap->a_uio->uio_resid)
return (ENAMETOOLONG);
error = uiomove(dp, dp->d_reclen, ap->a_uio);
if (error) {
if (ap->a_ncookies != NULL) {
if (ap->a_cookies != NULL)
free(ap->a_cookies, M_TEMP);
ap->a_cookies = NULL;
*ap->a_ncookies = 0;
}
return (error);
}
if (ap->a_ncookies == NULL)
return (0);
This is a workaround for a complicated issue involving VFS cookies and devfs. The PR and patch have the details. The ultimate fix requires architectural changes and clarifications to the VFS API, but this will prevent the system from panicking when someone does "ls /dev" while running in a shell under the linuxulator. This issue affects HEAD and RELENG_6 only. PR: 88249 Submitted by: "Devon H. O'Dell" <dodell@ixsystems.com> MFC after: 3 days
2005-11-09 22:03:50 +00:00
KASSERT(ap->a_cookies,
("NULL ap->a_cookies value with non-NULL ap->a_ncookies!"));
Introduce vfs_read_dirent() which can help VOP_READDIR() implementations by handling all the cookie stuff.
2005-09-12 08:46:07 +00:00
*ap->a_cookies = realloc(*ap->a_cookies,
(*ap->a_ncookies + 1) * sizeof(u_long), M_TEMP, M_WAITOK | M_ZERO);
(*ap->a_cookies)[*ap->a_ncookies] = off;
vfs_read_dirent: increment ncookies after adding a cookie It seems that at present vfs_read_dirent() is used only with filesystems that do not support cookies, so the bug never manifested itself. MFC after: 1 week
2016-05-16 07:31:11 +00:00
*ap->a_ncookies += 1;
Introduce vfs_read_dirent() which can help VOP_READDIR() implementations by handling all the cookie stuff.
2005-09-12 08:46:07 +00:00
return (0);
}
Move execve's access time update functionality into a new vfs_mark_atime() function, and use the new function for performing efficient atime updates in mmap(). Reviewed by: bde MFC after: 2 weeks
2005-10-12 06:56:00 +00:00
/*
* Mark for update the access time of the file if the filesystem
Tweak the wording for vfs_mark_atime() since the I/O it is avoiding by not updating va_atime via VOP_SETATTR() isn't always synchronous. For some filesystems it is asynchronous. Suggested by: bde
2009-01-23 22:13:00 +00:00
* supports VOP_MARKATIME. This functionality is used by execve and
* mmap, so we want to avoid the I/O implied by directly setting
* va_atime for the sake of efficiency.
Move execve's access time update functionality into a new vfs_mark_atime() function, and use the new function for performing efficient atime updates in mmap(). Reviewed by: bde MFC after: 2 weeks
2005-10-12 06:56:00 +00:00
*/
void
Decontextualize the couplet VOP_GETATTR / VOP_SETATTR as the passed thread was always curthread and totally unuseful. Tested by: Giovanni Trematerra <giovanni dot trematerra at gmail dot com>
2008-08-28 15:23:18 +00:00
vfs_mark_atime(struct vnode *vp, struct ucred *cred)
Move execve's access time update functionality into a new vfs_mark_atime() function, and use the new function for performing efficient atime updates in mmap(). Reviewed by: bde MFC after: 2 weeks
2005-10-12 06:56:00 +00:00
{
In vfs_mark_atime(9), be resistent against reclaimed vnodes. Assert that neccessary locks are taken, since vop might not be called. Tested by: pho MFC after: 3 days
2009-09-09 10:51:50 +00:00
struct mount *mp;
Move execve's access time update functionality into a new vfs_mark_atime() function, and use the new function for performing efficient atime updates in mmap(). Reviewed by: bde MFC after: 2 weeks
2005-10-12 06:56:00 +00:00
In vfs_mark_atime(9), be resistent against reclaimed vnodes. Assert that neccessary locks are taken, since vop might not be called. Tested by: pho MFC after: 3 days
2009-09-09 10:51:50 +00:00
mp = vp->v_mount;
ASSERT_VOP_LOCKED(vp, "vfs_mark_atime");
if (mp != NULL && (mp->mnt_flag & (MNT_NOATIME | MNT_RDONLY)) == 0)
Move the VA_MARKATIME flag for VOP_SETATTR() out into its own VOP: VOP_MARKATIME() since unlike the rest of VOP_SETATTR(), VA_MARKATIME can be performed while holding a shared vnode lock (the same functionality is done internally by VOP_READ which can run with a shared vnode lock). Add missing locking of the vnode interlock to the ufs implementation and remove a special note and test from the NFS client about not supporting the feature. Inspired by: ups Tested by: pho
2009-01-21 14:42:00 +00:00
(void)VOP_MARKATIME(vp);
Move execve's access time update functionality into a new vfs_mark_atime() function, and use the new function for performing efficient atime updates in mmap(). Reviewed by: bde MFC after: 2 weeks
2005-10-12 06:56:00 +00:00
}
Add VOP_ACCESSX, which can be used to query for newly added V* permissions, such as VWRITE_ACL. For a filsystems that don't implement it, there is a default implementation, which works as a wrapper around VOP_ACCESS. Reviewed by: rwatson@
2009-05-30 13:59:05 +00:00
/*
* The purpose of this routine is to remove granularity from accmode_t,
* reducing it into standard unix access bits - VEXEC, VREAD, VWRITE,
* VADMIN and VAPPEND.
*
* If it returns 0, the caller is supposed to continue with the usual
* access checks using 'accmode' as modified by this routine. If it
* returns nonzero value, the caller is supposed to return that value
* as errno.
*
* Note that after this routine runs, accmode may be zero.
*/
int
vfs_unixify_accmode(accmode_t *accmode)
{
/*
* There is no way to specify explicit "deny" rule using
* file mode or POSIX.1e ACLs.
*/
if (*accmode & VEXPLICIT_DENY) {
*accmode = 0;
return (0);
}
/*
* None of these can be translated into usual access bits.
* Also, the common case for NFSv4 ACLs is to not contain
* either of these bits. Caller should check for VWRITE
* on the containing directory instead.
*/
if (*accmode & (VDELETE_CHILD | VDELETE))
return (EPERM);
if (*accmode & VADMIN_PERMS) {
*accmode &= ~VADMIN_PERMS;
*accmode |= VADMIN;
}
/*
* There is no way to deny VREAD_ATTRIBUTES, VREAD_ACL
* or VSYNCHRONIZE using file mode or POSIX.1e ACL.
*/
*accmode &= ~(VSTAT_PERMS | VSYNCHRONIZE);
return (0);
}
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
/*
* These are helper functions for filesystems to traverse all
* their vnodes. See MNT_VNODE_FOREACH_ALL() in sys/mount.h.
*
* This interface replaces MNT_VNODE_FOREACH.
*/
MALLOC_DEFINE(M_VNODE_MARKER, "vnodemarker", "vnode marker");
struct vnode *
__mnt_vnode_next_all(struct vnode **mvp, struct mount *mp)
{
struct vnode *vp;
if (should_yield())
Fixup r218424: uio_yield() was scaling directly to userland priority. When kern_yield() was introduced with the possibility to specify a new priority, the behaviour changed by not lowering priority at all in the consumers, making the yielding mechanism highly ineffective for high priority kthreads like bufdaemon, syncer, vlrudaemon, etc. There are no evidences that consumers could bear with such change in semantic and this situation could finally lead to bugs similar to the ones fixed in r244240. Re-specify userland pri for kthreads involved. Tested by: pho Reviewed by: kib, mdf MFC after: 1 week
2012-12-21 13:14:12 +00:00
kern_yield(PRI_USER);
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
MNT_ILOCK(mp);
KASSERT((*mvp)->v_mount == mp, ("marker vnode mount list mismatch"));
Fix a racy VI_DOOMED check in MNT_VNODE_FOREACH_ALL(). MNT_VNODE_FOREACH_ALL() is supposed to avoid returning doomed vnodes, but the VI_DOOMED check it used was done without the vnode interlock held, so it could race with a concurrent vgone(). Submitted by: Don Morris <don.morris@isilon.com> Reviewed by: kib, mckusick MFC after: 1 week Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12704
2017-10-17 19:41:45 +00:00
for (vp = TAILQ_NEXT(*mvp, v_nmntvnodes); vp != NULL;
vp = TAILQ_NEXT(vp, v_nmntvnodes)) {
/* Allow a racy peek at VI_DOOMED to save a lock acquisition. */
if (vp->v_type == VMARKER || (vp->v_iflag & VI_DOOMED) != 0)
continue;
VI_LOCK(vp);
if ((vp->v_iflag & VI_DOOMED) != 0) {
VI_UNLOCK(vp);
continue;
}
break;
}
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
if (vp == NULL) {
__mnt_vnode_markerfree_all(mvp, mp);
/* MNT_IUNLOCK(mp); -- done in above function */
mtx_assert(MNT_MTX(mp), MA_NOTOWNED);
return (NULL);
}
TAILQ_REMOVE(&mp->mnt_nvnodelist, *mvp, v_nmntvnodes);
TAILQ_INSERT_AFTER(&mp->mnt_nvnodelist, vp, *mvp, v_nmntvnodes);
MNT_IUNLOCK(mp);
return (vp);
}
struct vnode *
__mnt_vnode_first_all(struct vnode **mvp, struct mount *mp)
{
struct vnode *vp;
*mvp = malloc(sizeof(struct vnode), M_VNODE_MARKER, M_WAITOK | M_ZERO);
MNT_ILOCK(mp);
MNT_REF(mp);
Fix a racy VI_DOOMED check in MNT_VNODE_FOREACH_ALL(). MNT_VNODE_FOREACH_ALL() is supposed to avoid returning doomed vnodes, but the VI_DOOMED check it used was done without the vnode interlock held, so it could race with a concurrent vgone(). Submitted by: Don Morris <don.morris@isilon.com> Reviewed by: kib, mckusick MFC after: 1 week Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12704
2017-10-17 19:41:45 +00:00
(*mvp)->v_mount = mp;
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
(*mvp)->v_type = VMARKER;
Fix a racy VI_DOOMED check in MNT_VNODE_FOREACH_ALL(). MNT_VNODE_FOREACH_ALL() is supposed to avoid returning doomed vnodes, but the VI_DOOMED check it used was done without the vnode interlock held, so it could race with a concurrent vgone(). Submitted by: Don Morris <don.morris@isilon.com> Reviewed by: kib, mckusick MFC after: 1 week Sponsored by: Dell EMC Isilon Differential Revision: https://reviews.freebsd.org/D12704
2017-10-17 19:41:45 +00:00
TAILQ_FOREACH(vp, &mp->mnt_nvnodelist, v_nmntvnodes) {
/* Allow a racy peek at VI_DOOMED to save a lock acquisition. */
if (vp->v_type == VMARKER || (vp->v_iflag & VI_DOOMED) != 0)
continue;
VI_LOCK(vp);
if ((vp->v_iflag & VI_DOOMED) != 0) {
VI_UNLOCK(vp);
continue;
}
break;
}
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
if (vp == NULL) {
MNT_REL(mp);
MNT_IUNLOCK(mp);
free(*mvp, M_VNODE_MARKER);
Fix a memory leak of M_VNODE_MARKER introduced in 234386. Found by: Peter Holm
2012-04-18 19:30:22 +00:00
*mvp = NULL;
Replace the MNT_VNODE_FOREACH interface with MNT_VNODE_FOREACH_ALL. The primary changes are that the user of the interface no longer needs to manage the mount-mutex locking and that the vnode that is returned has its mutex locked (thus avoiding the need to check to see if its is DOOMED or other possible end of life senarios). To minimize compatibility issues for third-party developers, the old MNT_VNODE_FOREACH interface will remain available so that this change can be MFC'ed to 9. Following the MFC to 9, MNT_VNODE_FOREACH will be removed in head. The reason for this update is to prepare for the addition of the MNT_VNODE_FOREACH_ACTIVE interface that will loop over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-17 16:28:22 +00:00
return (NULL);
}
TAILQ_INSERT_AFTER(&mp->mnt_nvnodelist, vp, *mvp, v_nmntvnodes);
MNT_IUNLOCK(mp);
return (vp);
}
void
__mnt_vnode_markerfree_all(struct vnode **mvp, struct mount *mp)
{
if (*mvp == NULL) {
MNT_IUNLOCK(mp);
return;
}
mtx_assert(MNT_MTX(mp), MA_OWNED);
KASSERT((*mvp)->v_mount == mp, ("marker vnode mount list mismatch"));
TAILQ_REMOVE(&mp->mnt_nvnodelist, *mvp, v_nmntvnodes);
MNT_REL(mp);
MNT_IUNLOCK(mp);
free(*mvp, M_VNODE_MARKER);
*mvp = NULL;
}
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
/*
* These are helper functions for filesystems to traverse their
* active vnodes. See MNT_VNODE_FOREACH_ACTIVE() in sys/mount.h
*/
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
static void
mnt_vnode_markerfree_active(struct vnode **mvp, struct mount *mp)
{
KASSERT((*mvp)->v_mount == mp, ("marker vnode mount list mismatch"));
MNT_ILOCK(mp);
MNT_REL(mp);
MNT_IUNLOCK(mp);
free(*mvp, M_VNODE_MARKER);
*mvp = NULL;
}
mnt_vnode_next_active: use conventional lock order when trylock fails. Previously, when the VI_TRYLOCK failed, we would spin under the mutex that protects the vnode active list until we either succeeded or noticed that we had hogged the CPU. Since we were violating the lock order, this would guarantee that we would become a hog under any deadlock condition (e.g. a race with vdrop(9) on the same vnode). In the presence of many concurrent threads in sync(2) or vdrop etc, the victim could hang for a long time. Now, avoid spinning by dropping and reacquiring the locks in the conventional lock order when the trylock fails. This requires a dance with the vnode hold count. Submitted by: Tom Rix <trix@juniper.net> Tested by: pho Differential revision: https://reviews.freebsd.org/D10692
2017-05-15 10:02:45 +00:00
/*
* Relock the mp mount vnode list lock with the vp vnode interlock in the
* conventional lock order during mnt_vnode_next_active iteration.
*
* On entry, the mount vnode list lock is held and the vnode interlock is not.
* The list lock is dropped and reacquired. On success, both locks are held.
* On failure, the mount vnode list lock is held but the vnode interlock is
* not, and the procedure may have yielded.
*/
static bool
mnt_vnode_next_active_relock(struct vnode *mvp, struct mount *mp,
struct vnode *vp)
{
const struct vnode *tmp;
bool held, ret;
VNASSERT(mvp->v_mount == mp && mvp->v_type == VMARKER &&
TAILQ_NEXT(mvp, v_actfreelist) != NULL, mvp,
("%s: bad marker", __func__));
VNASSERT(vp->v_mount == mp && vp->v_type != VMARKER, vp,
("%s: inappropriate vnode", __func__));
ASSERT_VI_UNLOCKED(vp, __func__);
mtx_assert(&mp->mnt_listmtx, MA_OWNED);
ret = false;
TAILQ_REMOVE(&mp->mnt_activevnodelist, mvp, v_actfreelist);
TAILQ_INSERT_BEFORE(vp, mvp, v_actfreelist);
/*
* Use a hold to prevent vp from disappearing while the mount vnode
* list lock is dropped and reacquired. Normally a hold would be
* acquired with vhold(), but that might try to acquire the vnode
* interlock, which would be a LOR with the mount vnode list lock.
*/
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
held = refcount_acquire_if_not_zero(&vp->v_holdcnt);
mnt_vnode_next_active: use conventional lock order when trylock fails. Previously, when the VI_TRYLOCK failed, we would spin under the mutex that protects the vnode active list until we either succeeded or noticed that we had hogged the CPU. Since we were violating the lock order, this would guarantee that we would become a hog under any deadlock condition (e.g. a race with vdrop(9) on the same vnode). In the presence of many concurrent threads in sync(2) or vdrop etc, the victim could hang for a long time. Now, avoid spinning by dropping and reacquiring the locks in the conventional lock order when the trylock fails. This requires a dance with the vnode hold count. Submitted by: Tom Rix <trix@juniper.net> Tested by: pho Differential revision: https://reviews.freebsd.org/D10692
2017-05-15 10:02:45 +00:00
mtx_unlock(&mp->mnt_listmtx);
if (!held)
goto abort;
VI_LOCK(vp);
ZFS vn_rele_async: catch up with the use of refcount(9) for the vnode use count It's not sufficient nor required to use the vnode interlock when checking if we are going to drop the last use count as the code in vputx() uses refcount (atomic) operations for both checking and decrementing the use code. Apply the same method to vn_rele_async(). While here, remove vn_rele_inactive(), a wrapper around vrele() that didn't add any value. Also, the change required making vfs_refcount_release_if_not_last() public. I've made vfs_refcount_acquire_if_not_zero() public as well. They are in sys/refcount.h now. While making the move I've dropped the vfs_ prefix. Reviewed by: mjg MFC after: 2 weeks Sponsored by: Panzura Differential Revision: https://reviews.freebsd.org/D14869
2018-03-28 08:55:31 +00:00
if (!refcount_release_if_not_last(&vp->v_holdcnt)) {
mnt_vnode_next_active: use conventional lock order when trylock fails. Previously, when the VI_TRYLOCK failed, we would spin under the mutex that protects the vnode active list until we either succeeded or noticed that we had hogged the CPU. Since we were violating the lock order, this would guarantee that we would become a hog under any deadlock condition (e.g. a race with vdrop(9) on the same vnode). In the presence of many concurrent threads in sync(2) or vdrop etc, the victim could hang for a long time. Now, avoid spinning by dropping and reacquiring the locks in the conventional lock order when the trylock fails. This requires a dance with the vnode hold count. Submitted by: Tom Rix <trix@juniper.net> Tested by: pho Differential revision: https://reviews.freebsd.org/D10692
2017-05-15 10:02:45 +00:00
vdropl(vp);
goto abort;
}
mtx_lock(&mp->mnt_listmtx);
/*
* Determine whether the vnode is still the next one after the marker,
* excepting any other markers. If the vnode has not been doomed by
* vgone() then the hold should have ensured that it remained on the
* active list. If it has been doomed but is still on the active list,
* don't abort, but rather skip over it (avoid spinning on doomed
* vnodes).
*/
tmp = mvp;
do {
tmp = TAILQ_NEXT(tmp, v_actfreelist);
} while (tmp != NULL && tmp->v_type == VMARKER);
if (tmp != vp) {
mtx_unlock(&mp->mnt_listmtx);
VI_UNLOCK(vp);
goto abort;
}
ret = true;
goto out;
abort:
maybe_yield();
mtx_lock(&mp->mnt_listmtx);
out:
if (ret)
ASSERT_VI_LOCKED(vp, __func__);
else
ASSERT_VI_UNLOCKED(vp, __func__);
mtx_assert(&mp->mnt_listmtx, MA_OWNED);
return (ret);
}
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
static struct vnode *
mnt_vnode_next_active(struct vnode **mvp, struct mount *mp)
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
{
struct vnode *vp, *nvp;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_assert(&mp->mnt_listmtx, MA_OWNED);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
KASSERT((*mvp)->v_mount == mp, ("marker vnode mount list mismatch"));
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
restart:
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
vp = TAILQ_NEXT(*mvp, v_actfreelist);
while (vp != NULL) {
The vnode_free_list_mtx is required unconditionally when iterating over the active list. The mount interlock is not enough to guarantee the validity of the tailq link pointers. The __mnt_vnode_next_active() and __mnt_vnode_first_active() active lists iterators helper functions did not provided the neccessary stability for the list, allowing the iterators to pick garbage. This was uncovered after the r243599 made the active list iterators non-nop. Since a vnode interlock is before the vnode_free_list_mtx, obtain the vnode ilock in the non-blocking manner when under vnode_free_list_mtx, and restart iteration after the yield if the lock attempt failed. Assert that a vnode found on the list is active, and assert that the helpers return the vnode with interlock owned. Reported and tested by: pho MFC after: 1 week
2012-12-03 22:15:16 +00:00
if (vp->v_type == VMARKER) {
vp = TAILQ_NEXT(vp, v_actfreelist);
continue;
}
mnt_vnode_next_active: use conventional lock order when trylock fails. Previously, when the VI_TRYLOCK failed, we would spin under the mutex that protects the vnode active list until we either succeeded or noticed that we had hogged the CPU. Since we were violating the lock order, this would guarantee that we would become a hog under any deadlock condition (e.g. a race with vdrop(9) on the same vnode). In the presence of many concurrent threads in sync(2) or vdrop etc, the victim could hang for a long time. Now, avoid spinning by dropping and reacquiring the locks in the conventional lock order when the trylock fails. This requires a dance with the vnode hold count. Submitted by: Tom Rix <trix@juniper.net> Tested by: pho Differential revision: https://reviews.freebsd.org/D10692
2017-05-15 10:02:45 +00:00
/*
* Try-lock because this is the wrong lock order. If that does
* not succeed, drop the mount vnode list lock and try to
* reacquire it and the vnode interlock in the right order.
*/
if (!VI_TRYLOCK(vp) &&
!mnt_vnode_next_active_relock(*mvp, mp, vp))
goto restart;
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
KASSERT(vp->v_type != VMARKER, ("locked marker %p", vp));
KASSERT(vp->v_mount == mp || vp->v_mount == NULL,
("alien vnode on the active list %p %p", vp, mp));
if (vp->v_mount == mp && (vp->v_iflag & VI_DOOMED) == 0)
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
break;
nvp = TAILQ_NEXT(vp, v_actfreelist);
VI_UNLOCK(vp);
vp = nvp;
}
mnt_vnode_next_active: use conventional lock order when trylock fails. Previously, when the VI_TRYLOCK failed, we would spin under the mutex that protects the vnode active list until we either succeeded or noticed that we had hogged the CPU. Since we were violating the lock order, this would guarantee that we would become a hog under any deadlock condition (e.g. a race with vdrop(9) on the same vnode). In the presence of many concurrent threads in sync(2) or vdrop etc, the victim could hang for a long time. Now, avoid spinning by dropping and reacquiring the locks in the conventional lock order when the trylock fails. This requires a dance with the vnode hold count. Submitted by: Tom Rix <trix@juniper.net> Tested by: pho Differential revision: https://reviews.freebsd.org/D10692
2017-05-15 10:02:45 +00:00
TAILQ_REMOVE(&mp->mnt_activevnodelist, *mvp, v_actfreelist);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
/* Check if we are done */
if (vp == NULL) {
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
mnt_vnode_markerfree_active(mvp, mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
return (NULL);
}
TAILQ_INSERT_AFTER(&mp->mnt_activevnodelist, vp, *mvp, v_actfreelist);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
The vnode_free_list_mtx is required unconditionally when iterating over the active list. The mount interlock is not enough to guarantee the validity of the tailq link pointers. The __mnt_vnode_next_active() and __mnt_vnode_first_active() active lists iterators helper functions did not provided the neccessary stability for the list, allowing the iterators to pick garbage. This was uncovered after the r243599 made the active list iterators non-nop. Since a vnode interlock is before the vnode_free_list_mtx, obtain the vnode ilock in the non-blocking manner when under vnode_free_list_mtx, and restart iteration after the yield if the lock attempt failed. Assert that a vnode found on the list is active, and assert that the helpers return the vnode with interlock owned. Reported and tested by: pho MFC after: 1 week
2012-12-03 22:15:16 +00:00
ASSERT_VI_LOCKED(vp, "active iter");
KASSERT((vp->v_iflag & VI_ACTIVE) != 0, ("Non-active vp %p", vp));
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
return (vp);
}
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
struct vnode *
__mnt_vnode_next_active(struct vnode **mvp, struct mount *mp)
{
if (should_yield())
Fixup r218424: uio_yield() was scaling directly to userland priority. When kern_yield() was introduced with the possibility to specify a new priority, the behaviour changed by not lowering priority at all in the consumers, making the yielding mechanism highly ineffective for high priority kthreads like bufdaemon, syncer, vlrudaemon, etc. There are no evidences that consumers could bear with such change in semantic and this situation could finally lead to bugs similar to the ones fixed in r244240. Re-specify userland pri for kthreads involved. Tested by: pho Reviewed by: kib, mdf MFC after: 1 week
2012-12-21 13:14:12 +00:00
kern_yield(PRI_USER);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_lock(&mp->mnt_listmtx);
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
return (mnt_vnode_next_active(mvp, mp));
}
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
struct vnode *
__mnt_vnode_first_active(struct vnode **mvp, struct mount *mp)
{
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
struct vnode *vp;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
*mvp = malloc(sizeof(struct vnode), M_VNODE_MARKER, M_WAITOK | M_ZERO);
MNT_ILOCK(mp);
MNT_REF(mp);
Do not yield while owning a mutex. The Giant reacquire in the kern_yield() is problematic than. The owned mutex is the mount interlock, and it is in fact not needed to guarantee the stability of the mount list of active vnodes, so fix the the issue by only taking the mount interlock for MNT_REF and MNT_REL operations. While there, augment the unconditional yield by some amount of spinning [1]. Reported and tested by: pho Reviewed by: attilio Submitted by: attilio [1] MFC after: 3 days
2012-12-10 20:44:09 +00:00
MNT_IUNLOCK(mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
(*mvp)->v_type = VMARKER;
Do not yield while owning a mutex. The Giant reacquire in the kern_yield() is problematic than. The owned mutex is the mount interlock, and it is in fact not needed to guarantee the stability of the mount list of active vnodes, so fix the the issue by only taking the mount interlock for MNT_REF and MNT_REL operations. While there, augment the unconditional yield by some amount of spinning [1]. Reported and tested by: pho Reviewed by: attilio Submitted by: attilio [1] MFC after: 3 days
2012-12-10 20:44:09 +00:00
(*mvp)->v_mount = mp;
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_lock(&mp->mnt_listmtx);
Take first active vnode correctly. Reviewed by: kib MFC after: 3 days
2012-11-27 06:07:58 +00:00
vp = TAILQ_FIRST(&mp->mnt_activevnodelist);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
if (vp == NULL) {
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
mnt_vnode_markerfree_active(mvp, mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
return (NULL);
}
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
TAILQ_INSERT_BEFORE(vp, *mvp, v_actfreelist);
return (mnt_vnode_next_active(mvp, mp));
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
}
void
__mnt_vnode_markerfree_active(struct vnode **mvp, struct mount *mp)
{
Do not yield while owning a mutex. The Giant reacquire in the kern_yield() is problematic than. The owned mutex is the mount interlock, and it is in fact not needed to guarantee the stability of the mount list of active vnodes, so fix the the issue by only taking the mount interlock for MNT_REF and MNT_REL operations. While there, augment the unconditional yield by some amount of spinning [1]. Reported and tested by: pho Reviewed by: attilio Submitted by: attilio [1] MFC after: 3 days
2012-12-10 20:44:09 +00:00
if (*mvp == NULL)
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
return;
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_lock(&mp->mnt_listmtx);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
TAILQ_REMOVE(&mp->mnt_activevnodelist, *mvp, v_actfreelist);
vfs: batch free vnodes in per-mnt lists Previously free vnodes would always by directly returned to the global LRU list. With this change up to mnt_free_list_batch vnodes are collected first. syncer runs always return the batch regardless of its size. While vnodes on per-mnt lists are not counted as free, they can be returned in case of vnode shortage. Reviewed by: kib Tested by: pho
2016-09-30 17:27:17 +00:00
mtx_unlock(&mp->mnt_listmtx);
When mnt_vnode_next_active iterator cannot lock the next vnode and yields, specify the user priority for the yield. Otherwise, a higher-priority (kernel) thread could fall into the priority-inversion with the thread owning the mutex lock. On single-processor machines or UP kernels, do not loop adaptively when the next vnode cannot be locked, instead yield unconditionally. Restructure the iteration initializer and the iterator to remove code duplication. Put the code to fetch and lock a vnode next to the current marker, into the mnt_vnode_next_active() function, and use it instead of repeating the loop. Reported by: hrs, rmacklem Tested by: pho Sponsored by: The FreeBSD Foundation MFC after: 3 days
2012-12-15 02:04:46 +00:00
mnt_vnode_markerfree_active(mvp, mp);
This change creates a new list of active vnodes associated with a mount point. Active vnodes are those with a non-zero use or hold count, e.g., those vnodes that are not on the free list. Note that this list is in addition to the list of all the vnodes associated with a mount point. To avoid adding another set of linkage pointers to the vnode structure, the active list uses the existing linkage pointers used by the free list (previously named v_freelist, now renamed v_actfreelist). This update adds the MNT_VNODE_FOREACH_ACTIVE interface that loops over just the active vnodes associated with a mount point (typically less than 1% of the vnodes associated with the mount point). Reviewed by: kib Tested by: Peter Holm MFC after: 2 weeks
2012-04-20 06:50:44 +00:00
}
Reference in New Issue Copy Permalink