freebsd-dev/sys/sparc64/sbus/sbus.c

971 lines
29 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Paul Kranenburg.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 1992, 1993
* The Regents of the University of California. All rights reserved.
*
* This software was developed by the Computer Systems Engineering group
* at Lawrence Berkeley Laboratory under DARPA contract BG 91-66 and
* contributed to Berkeley.
*
* All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Lawrence Berkeley Laboratory.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 1999 Eduardo Horvath
* Copyright (c) 2002 by Thomas Moestl <tmm@FreeBSD.org>.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)sbus.c 8.1 (Berkeley) 6/11/93
* from: NetBSD: sbus.c,v 1.46 2001/10/07 20:30:41 eeh Exp
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*
* SBus support.
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
2004-06-04 11:52:25 +00:00
#include <sys/module.h>
#include <sys/pcpu.h>
#include <sys/reboot.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_bus_subr.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/bus_private.h>
#include <machine/iommureg.h>
#include <machine/bus_common.h>
#include <machine/intr_machdep.h>
#include <machine/nexusvar.h>
#include <machine/ofw_upa.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/iommuvar.h>
#include <sparc64/sbus/ofw_sbus.h>
#include <sparc64/sbus/sbusreg.h>
#include <sparc64/sbus/sbusvar.h>
struct sbus_devinfo {
int sdi_burstsz;
int sdi_clockfreq;
int sdi_slot;
struct ofw_bus_devinfo sdi_obdinfo;
struct resource_list sdi_rl;
};
/* Range descriptor, allocated for each sc_range. */
struct sbus_rd {
bus_addr_t rd_poffset;
bus_addr_t rd_pend;
int rd_slot;
bus_addr_t rd_coffset;
bus_addr_t rd_cend;
struct rman rd_rman;
bus_space_handle_t rd_bushandle;
struct resource *rd_res;
};
struct sbus_softc {
bus_space_tag_t sc_bustag;
bus_space_handle_t sc_bushandle;
bus_dma_tag_t sc_dmatag;
bus_dma_tag_t sc_cdmatag;
bus_space_tag_t sc_cbustag;
int sc_clockfreq; /* clock frequency (in Hz) */
struct upa_regs *sc_reg;
int sc_nreg;
int sc_nrange;
struct sbus_rd *sc_rd;
int sc_burst; /* burst transfer sizes supp. */
struct resource *sc_sysio_res;
int sc_ign; /* IGN for this sysio */
struct iommu_state sc_is; /* IOMMU state (iommuvar.h) */
struct resource *sc_ot_ires;
void *sc_ot_ihand;
struct resource *sc_pf_ires;
void *sc_pf_ihand;
};
struct sbus_clr {
struct sbus_softc *scl_sc;
bus_addr_t scl_clr; /* clear register */
driver_filter_t *scl_handler; /* handler to call */
void *scl_arg; /* argument for the handler */
void *scl_cookie; /* parent bus int. cookie */
};
#define SYSIO_READ8(sc, off) \
bus_space_read_8((sc)->sc_bustag, (sc)->sc_bushandle, (off))
#define SYSIO_WRITE8(sc, off, v) \
bus_space_write_8((sc)->sc_bustag, (sc)->sc_bushandle, (off), (v))
static device_probe_t sbus_probe;
static device_attach_t sbus_attach;
static bus_print_child_t sbus_print_child;
static bus_probe_nomatch_t sbus_probe_nomatch;
static bus_read_ivar_t sbus_read_ivar;
static bus_get_resource_list_t sbus_get_resource_list;
static bus_setup_intr_t sbus_setup_intr;
static bus_teardown_intr_t sbus_teardown_intr;
static bus_alloc_resource_t sbus_alloc_resource;
static bus_release_resource_t sbus_release_resource;
static bus_activate_resource_t sbus_activate_resource;
static bus_deactivate_resource_t sbus_deactivate_resource;
static ofw_bus_get_devinfo_t sbus_get_devinfo;
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
static int sbus_inlist(const char *, const char **);
static struct sbus_devinfo * sbus_setup_dinfo(device_t, struct sbus_softc *,
phandle_t);
static void sbus_destroy_dinfo(struct sbus_devinfo *);
static int sbus_intr_stub(void *);
static bus_space_tag_t sbus_alloc_bustag(struct sbus_softc *);
static int sbus_overtemp(void *);
static int sbus_pwrfail(void *);
static int sbus_print_res(struct sbus_devinfo *);
static device_method_t sbus_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, sbus_probe),
DEVMETHOD(device_attach, sbus_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, bus_generic_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, sbus_print_child),
DEVMETHOD(bus_probe_nomatch, sbus_probe_nomatch),
DEVMETHOD(bus_read_ivar, sbus_read_ivar),
DEVMETHOD(bus_setup_intr, sbus_setup_intr),
DEVMETHOD(bus_teardown_intr, sbus_teardown_intr),
DEVMETHOD(bus_alloc_resource, sbus_alloc_resource),
DEVMETHOD(bus_activate_resource, sbus_activate_resource),
DEVMETHOD(bus_deactivate_resource, sbus_deactivate_resource),
DEVMETHOD(bus_release_resource, sbus_release_resource),
DEVMETHOD(bus_get_resource_list, sbus_get_resource_list),
DEVMETHOD(bus_get_resource, bus_generic_rl_get_resource),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
/* ofw_bus interface */
DEVMETHOD(ofw_bus_get_devinfo, sbus_get_devinfo),
DEVMETHOD(ofw_bus_get_compat, ofw_bus_gen_get_compat),
DEVMETHOD(ofw_bus_get_model, ofw_bus_gen_get_model),
DEVMETHOD(ofw_bus_get_name, ofw_bus_gen_get_name),
DEVMETHOD(ofw_bus_get_node, ofw_bus_gen_get_node),
DEVMETHOD(ofw_bus_get_type, ofw_bus_gen_get_type),
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
{ 0, 0 }
};
static driver_t sbus_driver = {
"sbus",
sbus_methods,
sizeof(struct sbus_softc),
};
static devclass_t sbus_devclass;
DRIVER_MODULE(sbus, nexus, sbus_driver, sbus_devclass, 0, 0);
#define OFW_SBUS_TYPE "sbus"
#define OFW_SBUS_NAME "sbus"
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
static const char *sbus_order_first[] = {
"auxio",
"dma",
NULL
};
static int
sbus_inlist(const char *name, const char **list)
{
int i;
if (name == NULL)
return (0);
for (i = 0; list[i] != NULL; i++) {
if (strcmp(name, list[i]) == 0)
return (1);
}
return (0);
}
static int
sbus_probe(device_t dev)
{
char *t;
t = nexus_get_device_type(dev);
if (((t == NULL || strcmp(t, OFW_SBUS_TYPE) != 0)) &&
strcmp(nexus_get_name(dev), OFW_SBUS_NAME) != 0)
return (ENXIO);
device_set_desc(dev, "U2S UPA-SBus bridge");
return (0);
}
static int
sbus_attach(device_t dev)
{
struct sbus_softc *sc;
struct sbus_devinfo *sdi;
struct sbus_ranges *range;
struct resource *res;
device_t cdev;
bus_addr_t phys;
bus_size_t size;
char *name;
phandle_t child, node;
u_int64_t mr;
int intr, clock, rid, vec, i;
sc = device_get_softc(dev);
node = nexus_get_node(dev);
if ((sc->sc_nreg = OF_getprop_alloc(node, "reg", sizeof(*sc->sc_reg),
(void **)&sc->sc_reg)) == -1) {
panic("%s: error getting reg property", __func__);
}
if (sc->sc_nreg < 1)
panic("%s: bogus properties", __func__);
phys = UPA_REG_PHYS(&sc->sc_reg[0]);
size = UPA_REG_SIZE(&sc->sc_reg[0]);
rid = 0;
sc->sc_sysio_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE);
if (sc->sc_sysio_res == NULL ||
rman_get_start(sc->sc_sysio_res) != phys)
panic("%s: cannot allocate device memory", __func__);
sc->sc_bustag = rman_get_bustag(sc->sc_sysio_res);
sc->sc_bushandle = rman_get_bushandle(sc->sc_sysio_res);
if (OF_getprop(node, "interrupts", &intr, sizeof(intr)) == -1)
panic("%s: cannot get IGN", __func__);
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
sc->sc_ign = (intr & INTMAP_IGN_MASK) >> INTMAP_IGN_SHIFT;
sc->sc_cbustag = sbus_alloc_bustag(sc);
/*
* Record clock frequency for synchronous SCSI.
* IS THIS THE CORRECT DEFAULT??
*/
if (OF_getprop(node, "clock-frequency", &clock, sizeof(clock)) == -1)
clock = 25000000;
sc->sc_clockfreq = clock;
clock /= 1000;
device_printf(dev, "clock %d.%03d MHz\n", clock / 1000, clock % 1000);
/*
* Collect address translations from the OBP.
*/
if ((sc->sc_nrange = OF_getprop_alloc(node, "ranges",
sizeof(*range), (void **)&range)) == -1) {
panic("%s: error getting ranges property", __func__);
}
sc->sc_rd = (struct sbus_rd *)malloc(sizeof(*sc->sc_rd) * sc->sc_nrange,
M_DEVBUF, M_NOWAIT);
if (sc->sc_rd == NULL)
panic("%s: cannot allocate rmans", __func__);
/*
* Preallocate all space that the SBus bridge decodes, so that nothing
* else gets in the way; set up rmans etc.
*/
for (i = 0; i < sc->sc_nrange; i++) {
phys = range[i].poffset | ((bus_addr_t)range[i].pspace << 32);
size = range[i].size;
sc->sc_rd[i].rd_slot = range[i].cspace;
sc->sc_rd[i].rd_coffset = range[i].coffset;
sc->sc_rd[i].rd_cend = sc->sc_rd[i].rd_coffset + size;
rid = 0;
if ((res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, phys,
phys + size - 1, size, RF_ACTIVE)) == NULL)
panic("%s: cannot allocate decoded range", __func__);
sc->sc_rd[i].rd_bushandle = rman_get_bushandle(res);
sc->sc_rd[i].rd_rman.rm_type = RMAN_ARRAY;
sc->sc_rd[i].rd_rman.rm_descr = "SBus Device Memory";
if (rman_init(&sc->sc_rd[i].rd_rman) != 0 ||
rman_manage_region(&sc->sc_rd[i].rd_rman, 0, size) != 0)
panic("%s: failed to set up memory rman", __func__);
sc->sc_rd[i].rd_poffset = phys;
sc->sc_rd[i].rd_pend = phys + size;
sc->sc_rd[i].rd_res = res;
}
free(range, M_OFWPROP);
/*
* Get the SBus burst transfer size if burst transfers are supported.
* XXX: is the default correct?
*/
if (OF_getprop(node, "burst-sizes", &sc->sc_burst,
sizeof(sc->sc_burst)) == -1 || sc->sc_burst == 0)
sc->sc_burst = SBUS_BURST_DEF;
/* initalise the IOMMU */
/* punch in our copies */
sc->sc_is.is_bustag = sc->sc_bustag;
sc->sc_is.is_bushandle = sc->sc_bushandle;
sc->sc_is.is_iommu = SBR_IOMMU;
sc->sc_is.is_dtag = SBR_IOMMU_TLB_TAG_DIAG;
sc->sc_is.is_ddram = SBR_IOMMU_TLB_DATA_DIAG;
sc->sc_is.is_dqueue = SBR_IOMMU_QUEUE_DIAG;
sc->sc_is.is_dva = SBR_IOMMU_SVADIAG;
sc->sc_is.is_dtcmp = 0;
sc->sc_is.is_sb[0] = SBR_STRBUF;
2003-12-26 14:22:26 +00:00
sc->sc_is.is_sb[1] = 0;
/* give us a nice name.. */
name = (char *)malloc(32, M_DEVBUF, M_NOWAIT);
if (name == NULL)
panic("%s: cannot malloc iommu name", __func__);
snprintf(name, 32, "%s dvma", device_get_name(dev));
/*
* Note: the SBus IOMMU ignores the high bits of an address, so a NULL
* DMA pointer will be translated by the first page of the IOTSB.
* To detect bugs we'll allocate and ignore the first entry.
*/
iommu_init(name, &sc->sc_is, 3, -1, 1);
/* Create the DMA tag. */
sc->sc_dmatag = nexus_get_dmatag(dev);
if (bus_dma_tag_create(sc->sc_dmatag, 8, 1, 0, 0x3ffffffff, NULL, NULL,
0x3ffffffff, 0xff, 0xffffffff, 0, NULL, NULL, &sc->sc_cdmatag) != 0)
panic("%s: bus_dma_tag_create failed", __func__);
/* Customize the tag. */
sc->sc_cdmatag->dt_cookie = &sc->sc_is;
sc->sc_cdmatag->dt_mt = &iommu_dma_methods;
/* XXX: register as root dma tag (kludge). */
sparc64_root_dma_tag = sc->sc_cdmatag;
/* Enable the over-temperature and power-fail interrupts. */
rid = 0;
mr = SYSIO_READ8(sc, SBR_THERM_INT_MAP);
vec = INTVEC(mr);
sc->sc_ot_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE);
if (sc->sc_ot_ires == NULL ||
bus_setup_intr(dev, sc->sc_ot_ires, INTR_TYPE_MISC,
sbus_overtemp, NULL, sc, &sc->sc_ot_ihand) != 0)
panic("%s: failed to set up temperature interrupt", __func__);
SYSIO_WRITE8(sc, SBR_THERM_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
rid = 0;
mr = SYSIO_READ8(sc, SBR_POWER_INT_MAP);
vec = INTVEC(mr);
sc->sc_pf_ires = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, vec,
vec, 1, RF_ACTIVE);
if (sc->sc_pf_ires == NULL ||
bus_setup_intr(dev, sc->sc_pf_ires, INTR_TYPE_MISC,
sbus_pwrfail, NULL, sc, &sc->sc_pf_ihand) != 0)
panic("%s: failed to set up power fail interrupt", __func__);
SYSIO_WRITE8(sc, SBR_POWER_INT_MAP, INTMAP_ENABLE(mr, PCPU_GET(mid)));
/* Initialize the counter-timer. */
sparc64_counter_init(sc->sc_bustag, sc->sc_bushandle, SBR_TC0);
/*
* Loop through ROM children, fixing any relative addresses
* and then configuring each device.
*/
for (child = OF_child(node); child != 0; child = OF_peer(child)) {
if ((sdi = sbus_setup_dinfo(dev, sc, child)) == NULL)
continue;
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
/*
* For devices where there are variants that are actually
* split into two SBus devices (as opposed to the first
* half of the device being a SBus device and the second
* half hanging off of the first one) like 'auxio' and
* 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device
* which is a prerequisite to the driver attaching to the
* second one with a lower order. Saves us from dealing
* with different probe orders in the respective device
* drivers which generally is more hackish.
*/
cdev = device_add_child_ordered(dev, (OF_child(child) == 0 &&
sbus_inlist(sdi->sdi_obdinfo.obd_name, sbus_order_first)) ?
SBUS_ORDER_FIRST : SBUS_ORDER_NORMAL, NULL, -1);
if (cdev == NULL) {
device_printf(dev,
"<%s>: device_add_child_ordered failed\n",
sdi->sdi_obdinfo.obd_name);
sbus_destroy_dinfo(sdi);
continue;
}
device_set_ivars(cdev, sdi);
}
return (bus_generic_attach(dev));
}
static struct sbus_devinfo *
sbus_setup_dinfo(device_t dev, struct sbus_softc *sc, phandle_t node)
{
struct sbus_devinfo *sdi;
struct sbus_regs *reg;
u_int32_t base, iv, *intr;
int i, nreg, nintr, slot, rslot;
sdi = malloc(sizeof(*sdi), M_DEVBUF, M_ZERO | M_WAITOK);
if (ofw_bus_gen_setup_devinfo(&sdi->sdi_obdinfo, node) != 0) {
free(sdi, M_DEVBUF);
return (NULL);
}
resource_list_init(&sdi->sdi_rl);
slot = -1;
nreg = OF_getprop_alloc(node, "reg", sizeof(*reg), (void **)&reg);
if (nreg == -1) {
if (sdi->sdi_obdinfo.obd_type == NULL ||
strcmp(sdi->sdi_obdinfo.obd_type, "hierarchical") != 0) {
device_printf(dev, "<%s>: incomplete\n",
sdi->sdi_obdinfo.obd_name);
goto fail;
}
} else {
for (i = 0; i < nreg; i++) {
base = reg[i].sbr_offset;
if (SBUS_ABS(base)) {
rslot = SBUS_ABS_TO_SLOT(base);
base = SBUS_ABS_TO_OFFSET(base);
} else
rslot = reg[i].sbr_slot;
if (slot != -1 && slot != rslot) {
device_printf(dev, "<%s>: multiple slots\n",
sdi->sdi_obdinfo.obd_name);
free(reg, M_OFWPROP);
goto fail;
}
slot = rslot;
resource_list_add(&sdi->sdi_rl, SYS_RES_MEMORY, i,
base, base + reg[i].sbr_size, reg[i].sbr_size);
}
free(reg, M_OFWPROP);
}
sdi->sdi_slot = slot;
/*
* The `interrupts' property contains the SBus interrupt level.
*/
nintr = OF_getprop_alloc(node, "interrupts", sizeof(*intr),
(void **)&intr);
if (nintr != -1) {
for (i = 0; i < nintr; i++) {
iv = intr[i];
/*
* SBus card devices need the slot number encoded into
* the vector as this is generally not done.
*/
if ((iv & INTMAP_OBIO_MASK) == 0)
iv |= slot << 3;
/* Set the ign as appropriate. */
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
iv |= sc->sc_ign << INTMAP_IGN_SHIFT;
resource_list_add(&sdi->sdi_rl, SYS_RES_IRQ, i,
iv, iv, 1);
}
free(intr, M_OFWPROP);
}
if (OF_getprop(node, "burst-sizes", &sdi->sdi_burstsz,
sizeof(sdi->sdi_burstsz)) == -1)
sdi->sdi_burstsz = sc->sc_burst;
else
sdi->sdi_burstsz &= sc->sc_burst;
if (OF_getprop(node, "clock-frequency", &sdi->sdi_clockfreq,
sizeof(sdi->sdi_clockfreq)) == -1)
sdi->sdi_clockfreq = sc->sc_clockfreq;
return (sdi);
fail:
sbus_destroy_dinfo(sdi);
return (NULL);
}
static void
sbus_destroy_dinfo(struct sbus_devinfo *dinfo)
{
resource_list_free(&dinfo->sdi_rl);
ofw_bus_gen_destroy_devinfo(&dinfo->sdi_obdinfo);
free(dinfo, M_DEVBUF);
}
static int
sbus_print_child(device_t dev, device_t child)
{
int rv;
rv = bus_print_child_header(dev, child);
rv += sbus_print_res(device_get_ivars(child));
rv += bus_print_child_footer(dev, child);
return (rv);
}
static void
sbus_probe_nomatch(device_t dev, device_t child)
{
const char *type;
device_printf(dev, "<%s>", ofw_bus_get_name(child));
sbus_print_res(device_get_ivars(child));
type = ofw_bus_get_type(child);
printf(" type %s (no driver attached)\n",
type != NULL ? type : "unknown");
}
static int
sbus_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
struct sbus_softc *sc;
struct sbus_devinfo *dinfo;
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
sc = device_get_softc(dev);
if ((dinfo = device_get_ivars(child)) == NULL)
return (ENOENT);
switch (which) {
case SBUS_IVAR_BURSTSZ:
*result = dinfo->sdi_burstsz;
break;
case SBUS_IVAR_CLOCKFREQ:
*result = dinfo->sdi_clockfreq;
break;
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
case SBUS_IVAR_IGN:
*result = sc->sc_ign;
break;
case SBUS_IVAR_SLOT:
*result = dinfo->sdi_slot;
break;
default:
return (ENOENT);
}
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
return (0);
}
static struct resource_list *
sbus_get_resource_list(device_t dev, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_rl);
}
/* Write to the correct clr register, and call the actual handler. */
static int
sbus_intr_stub(void *arg)
{
struct sbus_clr *scl;
scl = (struct sbus_clr *)arg;
scl->scl_handler(scl->scl_arg);
SYSIO_WRITE8(scl->scl_sc, scl->scl_clr, 0);
return (FILTER_HANDLED);
}
static int
sbus_setup_intr(device_t dev, device_t child, struct resource *ires, int flags,
driver_filter_t *filt, driver_intr_t *intr, void *arg, void **cookiep)
{
struct sbus_softc *sc;
struct sbus_clr *scl;
bus_addr_t intrmapptr, intrclrptr, intrptr;
u_int64_t intrmap;
u_int32_t inr, slot;
int error, i;
long vec;
if (filt != NULL && intr != NULL)
return (EINVAL);
sc = device_get_softc(dev);
scl = (struct sbus_clr *)malloc(sizeof(*scl), M_DEVBUF, M_NOWAIT);
if (scl == NULL)
return (ENOMEM);
intrptr = intrmapptr = intrclrptr = 0;
intrmap = 0;
vec = rman_get_start(ires);
inr = INTVEC(vec);
if ((inr & INTMAP_OBIO_MASK) == 0) {
/*
* We're in an SBus slot, register the map and clear
* intr registers.
*/
slot = INTSLOT(vec);
intrmapptr = SBR_SLOT0_INT_MAP + slot * 8;
intrclrptr = SBR_SLOT0_INT_CLR +
(slot * 8 * 8) + (INTPRI(vec) * 8);
/* Enable the interrupt, insert IGN. */
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
intrmap = inr | (sc->sc_ign << INTMAP_IGN_SHIFT);
} else {
intrptr = SBR_SCSI_INT_MAP;
/* Insert IGN */
- Add an IVAR for retrieving the interrupt group number of the parent Sbus device and which also applies to the children. This is very usefull for drivers for the various subordinate busses so they don't need to fiddle with the OFW node of their parent themselves. As SBus busses hang of the nexus and we don't use the ofw_bus interface for nexus devices, yet, this would also require special knowledge about this in the drivers for the SBus children which these shouldn't need to have. This includes switching to use an unshifted IGN in the sc_ign member of the sbus(4) softc internally. - For SBus child devices where there are variants that are actually split split into two SBus devices (as opposed to the first half of the device being a SBus device and the second half hanging off of the first one) like 'auxio' and 'SUNW,fdtwo' or 'dma' and 'esp' probe the SBus device which is a prerequisite to the driver attaching to the second one with a lower order. This saves us from dealing with different probe orders in the respective device drivers which generally is more hackish. - Remove a stale comment about the 'specials' array above the attaching of the child devices. This is a remnant of the NetBSD/sparc origin of this code. There the 'specials' array is also used to probe certain devices which are prerequisites to others first. Why NetBSD soley relies on the devices having the expected order in the OFW tree on sparc64 isn't clear to me, as far as I can tell OFW doesn't guaranteed such things.
2005-05-19 14:47:31 +00:00
inr |= sc->sc_ign << INTMAP_IGN_SHIFT;
for (i = 0; intrptr <= SBR_RESERVED_INT_MAP &&
INTVEC(intrmap = SYSIO_READ8(sc, intrptr)) != inr;
intrptr += 8, i++)
;
if (INTVEC(intrmap) == inr) {
/* Register the map and clear intr registers */
intrmapptr = intrptr;
intrclrptr = SBR_SCSI_INT_CLR + i * 8;
/* Enable the interrupt */
} else
panic("%s: IRQ not found!", __func__);
}
scl->scl_sc = sc;
scl->scl_arg = arg;
scl->scl_handler = (filt != NULL) ? filt : (driver_filter_t *)intr;
scl->scl_clr = intrclrptr;
/* Disable the interrupt while we fiddle with it */
SYSIO_WRITE8(sc, intrmapptr, intrmap & ~INTMAP_V);
if (filt != NULL)
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires,
flags, sbus_intr_stub, NULL, scl, cookiep);
else
error = BUS_SETUP_INTR(device_get_parent(dev), child, ires,
flags, NULL, (driver_intr_t *)sbus_intr_stub, scl,
cookiep);
if (error != 0) {
free(scl, M_DEVBUF);
return (error);
}
scl->scl_cookie = *cookiep;
*cookiep = scl;
/*
* Clear the interrupt, it might have been triggered before it was
* set up.
*/
SYSIO_WRITE8(sc, intrclrptr, 0);
/*
* Enable the interrupt and program the target module now we have the
* handler installed.
*/
SYSIO_WRITE8(sc, intrmapptr, INTMAP_ENABLE(intrmap, PCPU_GET(mid)));
return (error);
}
static int
sbus_teardown_intr(device_t dev, device_t child, struct resource *vec,
void *cookie)
{
struct sbus_clr *scl;
int error;
scl = (struct sbus_clr *)cookie;
error = BUS_TEARDOWN_INTR(device_get_parent(dev), child, vec,
scl->scl_cookie);
/*
* Don't disable the interrupt for now, so that stray interrupts get
* detected...
*/
if (error != 0)
free(scl, M_DEVBUF);
return (error);
}
static struct resource *
sbus_alloc_resource(device_t bus, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, u_int flags)
{
struct sbus_softc *sc;
struct rman *rm;
struct resource *rv;
struct resource_list *rl;
struct resource_list_entry *rle;
device_t schild;
bus_space_handle_t bh;
bus_addr_t toffs;
bus_size_t tend;
int i, slot;
int isdefault, needactivate, passthrough;
isdefault = (start == 0UL && end == ~0UL);
needactivate = flags & RF_ACTIVE;
passthrough = (device_get_parent(child) != bus);
rle = NULL;
sc = device_get_softc(bus);
rl = BUS_GET_RESOURCE_LIST(bus, child);
switch (type) {
case SYS_RES_IRQ:
return (resource_list_alloc(rl, bus, child, type, rid, start,
end, count, flags));
case SYS_RES_MEMORY:
if (!passthrough) {
rle = resource_list_find(rl, type, *rid);
if (rle == NULL)
return (NULL);
if (rle->res != NULL)
panic("%s: resource entry is busy", __func__);
if (isdefault) {
start = rle->start;
count = ulmax(count, rle->count);
end = ulmax(rle->end, start + count - 1);
}
}
rm = NULL;
bh = toffs = tend = 0;
schild = child;
while (device_get_parent(schild) != bus)
schild = device_get_parent(child);
slot = sbus_get_slot(schild);
for (i = 0; i < sc->sc_nrange; i++) {
if (sc->sc_rd[i].rd_slot != slot ||
start < sc->sc_rd[i].rd_coffset ||
start > sc->sc_rd[i].rd_cend)
continue;
/* Disallow cross-range allocations. */
if (end > sc->sc_rd[i].rd_cend)
return (NULL);
/* We've found the connection to the parent bus */
toffs = start - sc->sc_rd[i].rd_coffset;
tend = end - sc->sc_rd[i].rd_coffset;
rm = &sc->sc_rd[i].rd_rman;
bh = sc->sc_rd[i].rd_bushandle;
break;
}
if (rm == NULL)
return (NULL);
flags &= ~RF_ACTIVE;
rv = rman_reserve_resource(rm, toffs, tend, count, flags,
child);
if (rv == NULL)
return (NULL);
rman_set_rid(rv, *rid);
rman_set_bustag(rv, sc->sc_cbustag);
rman_set_bushandle(rv, bh + rman_get_start(rv));
if (needactivate) {
if (bus_activate_resource(child, type, *rid, rv)) {
rman_release_resource(rv);
return (NULL);
}
}
if (!passthrough)
rle->res = rv;
return (rv);
default:
return (NULL);
}
}
static int
sbus_activate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
void *p;
int error;
if (type == SYS_RES_IRQ) {
return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus),
child, type, rid, r));
}
if (type == SYS_RES_MEMORY) {
/*
* Need to memory-map the device space, as some drivers depend
* on the virtual address being set and useable.
*/
error = sparc64_bus_mem_map(rman_get_bustag(r),
rman_get_bushandle(r), rman_get_size(r), 0, 0, &p);
if (error != 0)
return (error);
rman_set_virtual(r, p);
}
return (rman_activate_resource(r));
}
static int
sbus_deactivate_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
if (type == SYS_RES_IRQ) {
return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus),
child, type, rid, r));
}
if (type == SYS_RES_MEMORY) {
sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
rman_set_virtual(r, NULL);
}
return (rman_deactivate_resource(r));
}
static int
sbus_release_resource(device_t bus, device_t child, int type, int rid,
struct resource *r)
{
struct resource_list *rl;
struct resource_list_entry *rle;
int error, passthrough;
passthrough = (device_get_parent(child) != bus);
rl = BUS_GET_RESOURCE_LIST(bus, child);
if (type == SYS_RES_IRQ)
return (resource_list_release(rl, bus, child, type, rid, r));
if ((rman_get_flags(r) & RF_ACTIVE) != 0) {
error = bus_deactivate_resource(child, type, rid, r);
if (error != 0)
return (error);
}
error = rman_release_resource(r);
if (error != 0 || passthrough)
return (error);
rle = resource_list_find(rl, type, rid);
if (rle == NULL)
panic("%s: cannot find resource", __func__);
if (rle->res == NULL)
panic("%s: resource entry is not busy", __func__);
rle->res = NULL;
return (0);
}
static const struct ofw_bus_devinfo *
sbus_get_devinfo(device_t bus, device_t child)
{
struct sbus_devinfo *sdi;
sdi = device_get_ivars(child);
return (&sdi->sdi_obdinfo);
}
/*
* Handle an overtemp situation.
*
* SPARCs have temperature sensors which generate interrupts
* if the machine's temperature exceeds a certain threshold.
* This handles the interrupt and powers off the machine.
* The same needs to be done to PCI controller drivers.
*/
static int
sbus_overtemp(void *arg)
{
printf("DANGER: OVER TEMPERATURE detected\nShutting down NOW.\n");
shutdown_nice(RB_POWEROFF);
return (FILTER_HANDLED);
}
/* Try to shut down in time in case of power failure. */
static int
sbus_pwrfail(void *arg)
{
printf("Power failure detected\nShutting down NOW.\n");
shutdown_nice(0);
return (FILTER_HANDLED);
}
static bus_space_tag_t
sbus_alloc_bustag(struct sbus_softc *sc)
{
bus_space_tag_t sbt;
sbt = (bus_space_tag_t)malloc(sizeof(struct bus_space_tag), M_DEVBUF,
M_NOWAIT | M_ZERO);
if (sbt == NULL)
panic("%s: out of memory", __func__);
sbt->bst_cookie = sc;
sbt->bst_parent = sc->sc_bustag;
sbt->bst_type = SBUS_BUS_SPACE;
return (sbt);
}
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
static int
sbus_print_res(struct sbus_devinfo *sdi)
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
{
int rv;
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
rv = 0;
rv += resource_list_print_type(&sdi->sdi_rl, "mem", SYS_RES_MEMORY,
"%#lx");
rv += resource_list_print_type(&sdi->sdi_rl, "irq", SYS_RES_IRQ,
"%ld");
return (rv);
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
}