d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
e0b79e669b
freebsd-dev/sys/netipsec/ipsec_output.c

736 lines
19 KiB
C
Raw Normal View History

add missing copyright notices Noticed by: Robert Watson
2003-03-28 20:28:05 +00:00
/*-
* Copyright (c) 2002, 2003 Sam Leffler, Errno Consulting
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* IPsec output processing.
*/
#include "opt_inet.h"
#include "opt_inet6.h"
#include "opt_ipsec.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/mbuf.h>
#include <sys/domain.h>
#include <sys/protosw.h>
#include <sys/socket.h>
#include <sys/errno.h>
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
#include <sys/hhook.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <sys/syslog.h>
#include <net/if.h>
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
#include <net/if_enc.h>
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare to this event, adding if_var.h to files that do need it. Also, include all includes that now are included due to implicit pollution via if_var.h Sponsored by: Netflix Sponsored by: Nginx, Inc.
2013-10-26 17:58:36 +00:00
#include <net/if_var.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <net/vnet.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#include <netinet/in.h>
#include <netinet/in_systm.h>
#include <netinet/ip.h>
#include <netinet/ip_var.h>
#include <netinet/in_var.h>
#include <netinet/ip_ecn.h>
#ifdef INET6
#include <netinet6/ip6_ecn.h>
#endif
#include <netinet/ip6.h>
#ifdef INET6
#include <netinet6/ip6_var.h>
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
#include <netinet6/scope6_var.h>
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#endif
#include <netinet/in_pcb.h>
#ifdef INET6
#include <netinet/icmp6.h>
#endif
#include <netipsec/ipsec.h>
#ifdef INET6
#include <netipsec/ipsec6.h>
#endif
#include <netipsec/ah_var.h>
#include <netipsec/esp_var.h>
#include <netipsec/ipcomp_var.h>
#include <netipsec/xform.h>
#include <netipsec/key.h>
#include <netipsec/keydb.h>
#include <netipsec/key_debug.h>
#include <machine/in_cksum.h>
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
#include <netinet/udp.h>
#endif
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
int
ipsec_process_done(struct mbuf *m, struct ipsecrequest *isr)
{
struct tdb_ident *tdbi;
struct m_tag *mtag;
struct secasvar *sav;
struct secasindex *saidx;
int error;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(isr != NULL, ("null ISR"));
Fix possible use after free due to security policy deletion. When we are passing mbuf to IPSec processing via ipsec[46]_process_packet(), we hold one reference to security policy and release it just after return from this function. But IPSec processing can be deffered and when we release reference to security policy after ipsec[46]_process_packet(), user can delete this security policy from SPDB. And when IPSec processing will be done, xform's callback function will do access to already freed memory. To fix this move KEY_FREESP() into callback function. Now IPSec code will release reference to SP after processing will be finished. Differential Revision: https://reviews.freebsd.org/D2324 No objections from: #network Sponsored by: Yandex LLC
2015-04-27 00:55:56 +00:00
IPSEC_ASSERT(isr->sp != NULL, ("NULL isr->sp"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav = isr->sav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(sav != NULL, ("null SA"));
IPSEC_ASSERT(sav->sah != NULL, ("null SAH"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx = &sav->sah->saidx;
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
/* Fix the header length, for AH processing. */
mtod(m, struct ip *)->ip_len = htons(m->m_pkthdr.len);
break;
#endif /* INET */
#ifdef INET6
case AF_INET6:
/* Fix the header length, for AH processing. */
if (m->m_pkthdr.len < sizeof (struct ip6_hdr)) {
error = ENXIO;
goto bad;
}
if (m->m_pkthdr.len - sizeof (struct ip6_hdr) > IPV6_MAXPACKET) {
/* No jumbogram support. */
error = ENXIO; /*?*/
goto bad;
}
mtod(m, struct ip6_hdr *)->ip6_plen =
htons(m->m_pkthdr.len - sizeof(struct ip6_hdr));
break;
#endif /* INET6 */
default:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: unknown protocol family %u\n", __func__,
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
saidx->dst.sa.sa_family));
error = ENXIO;
goto bad;
}
/*
* Add a record of what we've done or what needs to be done to the
* packet.
*/
mtag = m_tag_get(PACKET_TAG_IPSEC_OUT_DONE,
sizeof(struct tdb_ident), M_NOWAIT);
if (mtag == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: could not get packet tag\n", __func__));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
error = ENOMEM;
goto bad;
}
tdbi = (struct tdb_ident *)(mtag + 1);
tdbi->dst = saidx->dst;
tdbi->proto = saidx->proto;
tdbi->spi = sav->spi;
m_tag_prepend(m, mtag);
Correct IPSec SA statistic keeping The IPsec SA statistic keeping is used even for decision making on expiry/rekeying SAs. When there are multiple transformations being done the statistic keeping might be wrong. This mostly impacts multiple encapsulations on IPsec since the usual scenario it is not noticed due to the code path not taken. Differential Revision: https://reviews.freebsd.org/D3239 Reviewed by: ae, gnn Approved by: gnn(mentor)
2015-07-30 20:56:27 +00:00
key_sa_recordxfer(sav, m); /* record data transfer */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* If there's another (bundled) SA to apply, do so.
* Note that this puts a burden on the kernel stack size.
* If this is a problem we'll need to introduce a queue
* to set the packet on so we can unwind the stack before
* doing further processing.
*/
if (isr->next) {
Fix a bug introduced in r221129 that leads to a panic wen using bundled SAs. For now allow same address family bundles. While discovered with ESP and AH, which does not make a lot of sense, IPcomp could be a possible problematic candidate. PR: kern/164400 MFC after: 3 days
2012-07-22 17:46:05 +00:00
/* XXX-BZ currently only support same AF bundles. */
Make IPsec compile without INET adding appropriate #ifdef checks. Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c to not need three different versions depending on INET, INET6 or both. Mark two places preparing for not yet supported functionality with IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:28:42 +00:00
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
Count statistics for the specific address family. MFC after: 1 week Sponsored by: Yandex LLC
2014-11-13 12:58:33 +00:00
IPSECSTAT_INC(ips_out_bundlesa);
Take extra reference to security policy before calling crypto_dispatch(). Currently we perform crypto requests for IPSEC synchronous for most of crypto providers (software, aesni) and only VIA padlock calls crypto callback asynchronous. In synchronous mode it is possible, that security policy will be removed during the processing crypto request. And crypto callback will release the last reference to SP. Then upon return into ipsec[46]_process_packet() IPSECREQUEST_UNLOCK() will be called to already freed request. To prevent this we will take extra reference to SP. PR: 201876 Sponsored by: Yandex LLC
2015-09-30 08:16:33 +00:00
return (ipsec4_process_packet(m, isr->next));
Make IPsec compile without INET adding appropriate #ifdef checks. Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c to not need three different versions depending on INET, INET6 or both. Mark two places preparing for not yet supported functionality with IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:28:42 +00:00
/* NOTREACHED */
#endif
#ifdef notyet
#ifdef INET6
case AF_INET6:
/* XXX */
Count statistics for the specific address family. MFC after: 1 week Sponsored by: Yandex LLC
2014-11-13 12:58:33 +00:00
IPSEC6STAT_INC(ips_out_bundlesa);
Take extra reference to security policy before calling crypto_dispatch(). Currently we perform crypto requests for IPSEC synchronous for most of crypto providers (software, aesni) and only VIA padlock calls crypto callback asynchronous. In synchronous mode it is possible, that security policy will be removed during the processing crypto request. And crypto callback will release the last reference to SP. Then upon return into ipsec[46]_process_packet() IPSECREQUEST_UNLOCK() will be called to already freed request. To prevent this we will take extra reference to SP. PR: 201876 Sponsored by: Yandex LLC
2015-09-30 08:16:33 +00:00
return (ipsec6_process_packet(m, isr->next));
Make IPsec compile without INET adding appropriate #ifdef checks. Unfold the IPSEC_COMMON_INPUT_CB() macro in xform_{ah,esp,ipcomp}.c to not need three different versions depending on INET, INET6 or both. Mark two places preparing for not yet supported functionality with IPv6. Reviewed by: gnn Sponsored by: The FreeBSD Foundation Sponsored by: iXsystems MFC after: 4 days
2011-04-27 19:28:42 +00:00
/* NOTREACHED */
#endif /* INET6 */
#endif
default:
DPRINTF(("%s: unknown protocol family %u\n", __func__,
saidx->dst.sa.sa_family));
error = ENXIO;
goto bad;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
* We're done with IPsec processing, transmit the packet using the
Fix the comment. We will not do SPD lookup again, because ip[6]_ipsec_output() will find PACKET_TAG_IPSEC_OUT_DONE mbuf tag. Sponsored by: Yandex LLC
2015-04-28 11:03:47 +00:00
* appropriate network protocol (IP or IPv6).
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*/
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
#ifdef IPSEC_NAT_T
/*
* If NAT-T is enabled, now that all IPsec processing is done
* insert UDP encapsulation header after IP header.
*/
if (sav->natt_type) {
Couple of changes missed from r241913, which converted IPv4 stack to network byte order.
2012-10-22 22:42:28 +00:00
struct ip *ip = mtod(m, struct ip *);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
const int hlen = (ip->ip_hl << 2);
int size, off;
struct mbuf *mi;
struct udphdr *udp;
size = sizeof(struct udphdr);
if (sav->natt_type == UDP_ENCAP_ESPINUDP_NON_IKE) {
/*
* draft-ietf-ipsec-nat-t-ike-0[01].txt and
* draft-ietf-ipsec-udp-encaps-(00/)01.txt,
* ignoring possible AH mode
* non-IKE marker + non-ESP marker
* from draft-ietf-ipsec-udp-encaps-00.txt.
*/
size += sizeof(u_int64_t);
}
mi = m_makespace(m, hlen, size, &off);
if (mi == NULL) {
DPRINTF(("%s: m_makespace for udphdr failed\n",
__func__));
error = ENOBUFS;
goto bad;
}
udp = (struct udphdr *)(mtod(mi, caddr_t) + off);
if (sav->natt_type == UDP_ENCAP_ESPINUDP_NON_IKE)
udp->uh_sport = htons(UDP_ENCAP_ESPINUDP_PORT);
else
udp->uh_sport =
KEY_PORTFROMSADDR(&sav->sah->saidx.src);
udp->uh_dport = KEY_PORTFROMSADDR(&sav->sah->saidx.dst);
udp->uh_sum = 0;
udp->uh_ulen = htons(m->m_pkthdr.len - hlen);
Couple of changes missed from r241913, which converted IPv4 stack to network byte order.
2012-10-22 22:42:28 +00:00
ip->ip_len = htons(m->m_pkthdr.len);
Added support for NAT-Traversal (RFC 3948) in IPsec stack. Thanks to (no special order) Emmanuel Dreyfus (manu@netbsd.org), Larry Baird (lab@gta.com), gnn, bz, and other FreeBSD devs, Julien Vanherzeele (julien.vanherzeele@netasq.com, for years of bug reporting), the PFSense team, and all people who used / tried the NAT-T patch for years and reported bugs, patches, etc... X-MFC: never Reviewed by: bz Approved by: gnn(mentor) Obtained from: NETASQ
2009-06-12 15:44:35 +00:00
ip->ip_p = IPPROTO_UDP;
if (sav->natt_type == UDP_ENCAP_ESPINUDP_NON_IKE)
*(u_int64_t *)(udp + 1) = 0;
}
#endif /* IPSEC_NAT_T */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return ip_output(m, NULL, NULL, IP_RAWOUTPUT, NULL, NULL);
#endif /* INET */
#ifdef INET6
case AF_INET6:
/*
* We don't need massage, IPv6 header fields are always in
* net endian.
*/
return ip6_output(m, NULL, NULL, 0, NULL, NULL, NULL);
#endif /* INET6 */
}
panic("ipsec_process_done");
bad:
m_freem(m);
return (error);
}
static struct ipsecrequest *
ipsec_nextisr(
struct mbuf *m,
struct ipsecrequest *isr,
int af,
struct secasindex *saidx,
int *error
)
{
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
#define IPSEC_OSTAT(name) do { \
if (isr->saidx.proto == IPPROTO_ESP) \
ESPSTAT_INC(esps_##name); \
else if (isr->saidx.proto == IPPROTO_AH)\
AHSTAT_INC(ahs_##name); \
else \
IPCOMPSTAT_INC(ipcomps_##name); \
} while (0)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secasvar *sav;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK_ASSERT(isr);
IPSEC_ASSERT(af == AF_INET || af == AF_INET6,
("invalid address family %u", af));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
again:
/*
* Craft SA index to search for proper SA. Note that
* we only fillin unspecified SA peers for transport
* mode; for tunnel mode they must already be filled in.
*/
*saidx = isr->saidx;
if (isr->saidx.mode == IPSEC_MODE_TRANSPORT) {
/* Fillin unspecified SA peers only for transport mode */
if (af == AF_INET) {
struct sockaddr_in *sin;
struct ip *ip = mtod(m, struct ip *);
if (saidx->src.sa.sa_len == 0) {
sin = &saidx->src.sin;
sin->sin_len = sizeof(*sin);
sin->sin_family = AF_INET;
sin->sin_port = IPSEC_PORT_ANY;
sin->sin_addr = ip->ip_src;
}
if (saidx->dst.sa.sa_len == 0) {
sin = &saidx->dst.sin;
sin->sin_len = sizeof(*sin);
sin->sin_family = AF_INET;
sin->sin_port = IPSEC_PORT_ANY;
sin->sin_addr = ip->ip_dst;
}
} else {
struct sockaddr_in6 *sin6;
struct ip6_hdr *ip6 = mtod(m, struct ip6_hdr *);
if (saidx->src.sin6.sin6_len == 0) {
sin6 = (struct sockaddr_in6 *)&saidx->src;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_port = IPSEC_PORT_ANY;
sin6->sin6_addr = ip6->ip6_src;
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_src)) {
/* fix scope id for comparing SPD */
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id =
ntohs(ip6->ip6_src.s6_addr16[1]);
}
}
if (saidx->dst.sin6.sin6_len == 0) {
sin6 = (struct sockaddr_in6 *)&saidx->dst;
sin6->sin6_len = sizeof(*sin6);
sin6->sin6_family = AF_INET6;
sin6->sin6_port = IPSEC_PORT_ANY;
sin6->sin6_addr = ip6->ip6_dst;
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_dst)) {
/* fix scope id for comparing SPD */
sin6->sin6_addr.s6_addr16[1] = 0;
sin6->sin6_scope_id =
ntohs(ip6->ip6_dst.s6_addr16[1]);
}
}
}
}
/*
* Lookup SA and validate it.
*/
*error = key_checkrequest(isr, saidx);
if (*error != 0) {
/*
* IPsec processing is required, but no SA found.
* I assume that key_acquire() had been called
* to get/establish the SA. Here I discard
* this packet because it is responsibility for
* upper layer to retransmit the packet.
*/
Fix ips_out_nosa errors accounting. MFC after: 1 week Sponsored by: Yandex LLC
2014-11-12 14:00:49 +00:00
switch(af) {
case AF_INET:
IPSECSTAT_INC(ips_out_nosa);
break;
#ifdef INET6
case AF_INET6:
IPSEC6STAT_INC(ips_out_nosa);
break;
#endif
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto bad;
}
sav = isr->sav;
Correct IPsec behaviour with a 'use' level in SP but no SA available. In that case return an continue processing the packet without IPsec. PR: 121384 MFC after: 5 days Reported by: Cyrus Rahman (crahman gmail.com) Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
if (sav == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(ipsec_get_reqlevel(isr) == IPSEC_LEVEL_USE,
("no SA found, but required; level %u",
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
ipsec_get_reqlevel(isr)));
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
isr = isr->next;
Correct IPsec behaviour with a 'use' level in SP but no SA available. In that case return an continue processing the packet without IPsec. PR: 121384 MFC after: 5 days Reported by: Cyrus Rahman (crahman gmail.com) Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
/*
* If isr is NULL, we found a 'use' policy w/o SA.
* Return w/o error and w/o isr so we can drop out
* and continue w/o IPsec processing.
*/
if (isr == NULL)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return isr;
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto again;
}
/*
* Check system global policy controls.
*/
Commit step 1 of the vimage project, (network stack) virtualization work done by Marko Zec (zec@). This is the first in a series of commits over the course of the next few weeks. Mark all uses of global variables to be virtualized with a V_ prefix. Use macros to map them back to their global names for now, so this is a NOP change only. We hope to have caught at least 85-90% of what is needed so we do not invalidate a lot of outstanding patches again. Obtained from: //depot/projects/vimage-commit2/... Reviewed by: brooks, des, ed, mav, julian, jamie, kris, rwatson, zec, ... (various people I forgot, different versions) md5 (with a bit of help) Sponsored by: NLnet Foundation, The FreeBSD Foundation X-MFC after: never V_Commit_Message_Reviewed_By: more people than the patch
2008-08-17 23:27:27 +00:00
if ((isr->saidx.proto == IPPROTO_ESP && !V_esp_enable) ||
(isr->saidx.proto == IPPROTO_AH && !V_ah_enable) ||
(isr->saidx.proto == IPPROTO_IPCOMP && !V_ipcomp_enable)) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: IPsec outbound packet dropped due"
" to policy (check your sysctls)\n", __func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
IPSEC_OSTAT(pdrops);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*error = EHOSTUNREACH;
goto bad;
}
/*
* Sanity check the SA contents for the caller
* before they invoke the xform output method.
*/
if (sav->tdb_xform == NULL) {
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
DPRINTF(("%s: no transform for SA\n", __func__));
Use corresponding macros to update statistics for AH, ESP, IPIP, IPCOMP, PFKEY. MFC after: 2 weeks
2013-06-20 11:44:16 +00:00
IPSEC_OSTAT(noxform);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*error = EHOSTUNREACH;
goto bad;
}
return isr;
bad:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(*error != 0, ("error return w/ no error code"));
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
return NULL;
#undef IPSEC_OSTAT
}
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
static int
ipsec_encap(struct mbuf **mp, struct secasindex *saidx)
{
#ifdef INET6
struct ip6_hdr *ip6;
#endif
struct ip *ip;
int setdf;
uint8_t itos, proto;
ip = mtod(*mp, struct ip *);
switch (ip->ip_v) {
#ifdef INET
case IPVERSION:
proto = IPPROTO_IPIP;
/*
* Collect IP_DF state from the inner header
* and honor system-wide control of how to handle it.
*/
switch (V_ip4_ipsec_dfbit) {
case 0: /* clear in outer header */
case 1: /* set in outer header */
setdf = V_ip4_ipsec_dfbit;
break;
default:/* propagate to outer header */
Fix handling of net.inet.ipsec.dfbit=2 variable. IP_DF macro is in host bytes order, but ip_off field is in network bytes order. So, use htons() for correct check.
2016-03-18 09:03:00 +00:00
setdf = (ip->ip_off & htons(IP_DF)) != 0;
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
}
itos = ip->ip_tos;
break;
#endif
#ifdef INET6
case (IPV6_VERSION >> 4):
proto = IPPROTO_IPV6;
ip6 = mtod(*mp, struct ip6_hdr *);
itos = (ntohl(ip6->ip6_flow) >> 20) & 0xff;
setdf = V_ip4_ipsec_dfbit ? 1: 0;
/* scoped address handling */
in6_clearscope(&ip6->ip6_src);
in6_clearscope(&ip6->ip6_dst);
break;
#endif
default:
return (EAFNOSUPPORT);
}
switch (saidx->dst.sa.sa_family) {
#ifdef INET
case AF_INET:
if (saidx->src.sa.sa_family != AF_INET ||
saidx->src.sin.sin_addr.s_addr == INADDR_ANY ||
saidx->dst.sin.sin_addr.s_addr == INADDR_ANY)
return (EINVAL);
M_PREPEND(*mp, sizeof(struct ip), M_NOWAIT);
if (*mp == NULL)
return (ENOBUFS);
ip = mtod(*mp, struct ip *);
ip->ip_v = IPVERSION;
ip->ip_hl = sizeof(struct ip) >> 2;
ip->ip_p = proto;
ip->ip_len = htons((*mp)->m_pkthdr.len);
ip->ip_ttl = V_ip_defttl;
ip->ip_sum = 0;
ip->ip_off = setdf ? htons(IP_DF): 0;
ip->ip_src = saidx->src.sin.sin_addr;
ip->ip_dst = saidx->dst.sin.sin_addr;
ip_ecn_ingress(V_ip4_ipsec_ecn, &ip->ip_tos, &itos);
ip_fillid(ip);
break;
#endif /* INET */
#ifdef INET6
case AF_INET6:
if (saidx->src.sa.sa_family != AF_INET6 ||
IN6_IS_ADDR_UNSPECIFIED(&saidx->src.sin6.sin6_addr) ||
IN6_IS_ADDR_UNSPECIFIED(&saidx->dst.sin6.sin6_addr))
return (EINVAL);
M_PREPEND(*mp, sizeof(struct ip6_hdr), M_NOWAIT);
if (*mp == NULL)
return (ENOBUFS);
ip6 = mtod(*mp, struct ip6_hdr *);
ip6->ip6_flow = 0;
ip6->ip6_vfc = IPV6_VERSION;
ip6->ip6_hlim = V_ip6_defhlim;
ip6->ip6_nxt = proto;
ip6->ip6_dst = saidx->dst.sin6.sin6_addr;
Fix handling of scoped IPv6 addresses in IPSec code. * in ipsec_encap() embed scope zone ids into link-local addresses in the new IPv6 header, this helps ip6_output() disambiguate the scope; * teach key_ismyaddr6() use in6_localip(). in6_localip() is less strict than key_sockaddrcmp(). It doesn't compare all fileds of struct sockaddr_in6, but it is faster and it should be safe, because all SA's data was checked for correctness. Also, since IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in kernel-internal form, we need to embed scope zone id from SA into the address before calling in6_localip. * in ipsec_common_input() take scope zone id embedded in the address and use it to initialize sin6_scope_id, then use this sockaddr structure to lookup SA, because we keep addresses in the SADB without embedded scope zone id. Differential Revision: https://reviews.freebsd.org/D2304 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:46:31 +00:00
/* For link-local address embed scope zone id */
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_dst))
ip6->ip6_dst.s6_addr16[1] =
htons(saidx->dst.sin6.sin6_scope_id & 0xffff);
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
ip6->ip6_src = saidx->src.sin6.sin6_addr;
Fix handling of scoped IPv6 addresses in IPSec code. * in ipsec_encap() embed scope zone ids into link-local addresses in the new IPv6 header, this helps ip6_output() disambiguate the scope; * teach key_ismyaddr6() use in6_localip(). in6_localip() is less strict than key_sockaddrcmp(). It doesn't compare all fileds of struct sockaddr_in6, but it is faster and it should be safe, because all SA's data was checked for correctness. Also, since IPv6 link-local addresses in the &V_in6_ifaddrhead are stored in kernel-internal form, we need to embed scope zone id from SA into the address before calling in6_localip. * in ipsec_common_input() take scope zone id embedded in the address and use it to initialize sin6_scope_id, then use this sockaddr structure to lookup SA, because we keep addresses in the SADB without embedded scope zone id. Differential Revision: https://reviews.freebsd.org/D2304 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:46:31 +00:00
if (IN6_IS_SCOPE_LINKLOCAL(&ip6->ip6_src))
ip6->ip6_src.s6_addr16[1] =
htons(saidx->src.sin6.sin6_scope_id & 0xffff);
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
ip6->ip6_plen = htons((*mp)->m_pkthdr.len - sizeof(*ip6));
ip_ecn_ingress(V_ip6_ipsec_ecn, &proto, &itos);
ip6->ip6_flow |= htonl((uint32_t)proto << 20);
break;
#endif /* INET6 */
default:
return (EAFNOSUPPORT);
}
return (0);
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
#ifdef INET
/*
* IPsec output logic for IPv4.
*/
int
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
ipsec4_process_packet(struct mbuf *m, struct ipsecrequest *isr)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Change ipsec_address() and ipsec_logsastr() functions to take two additional arguments - buffer and size of this buffer. ipsec_address() is used to convert sockaddr structure to presentation format. The IPv6 part of this function returns pointer to the on-stack buffer and at the moment when it will be used by caller, it becames invalid. IPv4 version uses 4 static buffers and returns pointer to new buffer each time when it called. But anyway it is still possible to get corrupted data when several threads will use this function. ipsec_logsastr() is used to format string about SA entry. It also uses static buffer and has the same problem with concurrent threads. To fix these problems add the buffer pointer and size of this buffer to arguments. Now each caller will pass buffer and its size to these functions. Also convert all places where these functions are used (except disabled code). And now ipsec_address() uses inet_ntop() function from libkern. PR: 185996 Differential Revision: https://reviews.freebsd.org/D2321 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:58:33 +00:00
char sbuf[INET6_ADDRSTRLEN], dbuf[INET6_ADDRSTRLEN];
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
struct ipsec_ctx_data ctx;
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
union sockaddr_union *dst;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secasindex saidx;
struct secasvar *sav;
struct ip *ip;
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
int error, i, off;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSEC_ASSERT(m != NULL, ("null mbuf"));
IPSEC_ASSERT(isr != NULL, ("null isr"));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_LOCK(isr); /* insure SA contents don't change */
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
isr = ipsec_nextisr(m, isr, AF_INET, &saidx, &error);
Correct IPsec behaviour with a 'use' level in SP but no SA available. In that case return an continue processing the packet without IPsec. PR: 121384 MFC after: 5 days Reported by: Cyrus Rahman (crahman gmail.com) Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
if (isr == NULL) {
if (error != 0)
goto bad;
return EJUSTRETURN;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
sav = isr->sav;
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
if (m->m_len < sizeof(struct ip) &&
(m = m_pullup(m, sizeof (struct ip))) == NULL) {
error = ENOBUFS;
goto bad;
}
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
IPSEC_INIT_CTX(&ctx, &m, sav, AF_INET, IPSEC_ENC_BEFORE);
if ((error = ipsec_run_hhooks(&ctx, HHOOK_TYPE_IPSEC_OUT)) != 0)
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
goto bad;
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
Since PFIL can change mbuf pointer, we should update pointers after calling ipsec_filter(). Sponsored by: Yandex LLC
2015-04-28 09:29:28 +00:00
ip = mtod(m, struct ip *);
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
dst = &sav->sah->saidx.dst;
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
/* Do the appropriate encapsulation, if necessary */
if (isr->saidx.mode == IPSEC_MODE_TUNNEL || /* Tunnel requ'd */
dst->sa.sa_family != AF_INET || /* PF mismatch */
(dst->sa.sa_family == AF_INET && /* Proxy */
dst->sin.sin_addr.s_addr != INADDR_ANY &&
dst->sin.sin_addr.s_addr != ip->ip_dst.s_addr)) {
/* Fix IPv4 header checksum and length */
ip->ip_len = htons(m->m_pkthdr.len);
ip->ip_sum = 0;
ip->ip_sum = in_cksum(m, ip->ip_hl << 2);
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
error = ipsec_encap(&m, &sav->sah->saidx);
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
if (error != 0) {
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
DPRINTF(("%s: encapsulation for SA %s->%s "
"SPI 0x%08x failed with error %d\n", __func__,
Change ipsec_address() and ipsec_logsastr() functions to take two additional arguments - buffer and size of this buffer. ipsec_address() is used to convert sockaddr structure to presentation format. The IPv6 part of this function returns pointer to the on-stack buffer and at the moment when it will be used by caller, it becames invalid. IPv4 version uses 4 static buffers and returns pointer to new buffer each time when it called. But anyway it is still possible to get corrupted data when several threads will use this function. ipsec_logsastr() is used to format string about SA entry. It also uses static buffer and has the same problem with concurrent threads. To fix these problems add the buffer pointer and size of this buffer to arguments. Now each caller will pass buffer and its size to these functions. Also convert all places where these functions are used (except disabled code). And now ipsec_address() uses inet_ntop() function from libkern. PR: 185996 Differential Revision: https://reviews.freebsd.org/D2321 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:58:33 +00:00
ipsec_address(&sav->sah->saidx.src, sbuf,
sizeof(sbuf)),
ipsec_address(&sav->sah->saidx.dst, dbuf,
sizeof(dbuf)), ntohl(sav->spi), error));
Remove flags and tunalready arguments from ipsec4_process_packet() and make its prototype similar to ipsec6_process_packet. The flags argument isn't used here, tunalready is always zero. Obtained from: Yandex LLC Sponsored by: Yandex LLC
2014-12-11 17:34:49 +00:00
goto bad;
}
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
IPSEC_INIT_CTX(&ctx, &m, sav, dst->sa.sa_family, IPSEC_ENC_AFTER);
if ((error = ipsec_run_hhooks(&ctx, HHOOK_TYPE_IPSEC_OUT)) != 0)
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
goto bad;
Add a pseudo interface for packet filtering IPSec connections before or after encryption. There are two functions, a bpf tap which has a basic header with the SPI number which our current tcpdump knows how to display, and handoff to pfil(9) for packet filtering. Obtained from: OpenBSD Based on: kern/94829 No objections: arch, net MFC after: 1 month
2006-06-26 22:30:08 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
/*
* Dispatch to the appropriate IPsec transform logic. The
* packet will be returned for transmission after crypto
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
* processing, etc. are completed.
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*
sys/net*: minor spelling fixes. No functional change.
2016-05-03 18:05:43 +00:00
* NB: m & sav are ``passed to caller'' who's responsible for
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
* for reclaiming their resources.
*/
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
switch(dst->sa.sa_family) {
case AF_INET:
ip = mtod(m, struct ip *);
i = ip->ip_hl << 2;
off = offsetof(struct ip, ip_p);
break;
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
#ifdef INET6
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
case AF_INET6:
i = sizeof(struct ip6_hdr);
off = offsetof(struct ip6_hdr, ip6_nxt);
break;
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
#endif /* INET6 */
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
default:
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
DPRINTF(("%s: unsupported protocol family %u\n",
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
__func__, dst->sa.sa_family));
error = EPFNOSUPPORT;
IPSECSTAT_INC(ips_out_inval);
goto bad;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
error = (*sav->tdb_xform->xf_output)(m, isr, NULL, i, off);
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
IPSECREQUEST_UNLOCK(isr);
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
return (error);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
bad:
MFp4: portability work, general cleanup, locking fixes change 38496 o add ipsec_osdep.h that holds os-specific definitions for portability o s/KASSERT/IPSEC_ASSERT/ for portability o s/SPLASSERT/IPSEC_SPLASSERT/ for portability o remove function names from ASSERT strings since line#+file pinpints the location o use __func__ uniformly to reduce string storage o convert some random #ifdef DIAGNOSTIC code to assertions o remove some debuggging assertions no longer needed change 38498 o replace numerous bogus panic's with equally bogus assertions that at least go away on a production system change 38502 + 38530 o change explicit mtx operations to #defines to simplify future changes to a different lock type change 38531 o hookup ipv4 ctlinput paths to a noop routine; we should be handling path mtu changes at least o correct potential null pointer deref in ipsec4_common_input_cb chnage 38685 o fix locking for bundled SA's and for when key exchange is required change 38770 o eliminate recursion on the SAHTREE lock change 38804 o cleanup some types: long -> time_t o remove refrence to dead #define change 38805 o correct some types: long -> time_t o add scan generation # to secpolicy to deal with locking issues change 38806 o use LIST_FOREACH_SAFE instead of handrolled code o change key_flush_spd to drop the sptree lock before purging an entry to avoid lock recursion and to avoid holding the lock over a long-running operation o misc cleanups of tangled and twisty code There is still much to do here but for now things look to be working again. Supported by: FreeBSD Foundation
2003-09-29 22:57:43 +00:00
if (isr)
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m)
m_freem(m);
return error;
}
#endif
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
#ifdef INET6
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
static int
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
in6_sa_equal_addrwithscope(const struct sockaddr_in6 *sa, const struct in6_addr *ia)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
struct in6_addr ia2;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
memcpy(&ia2, &sa->sin6_addr, sizeof(ia2));
if (IN6_IS_SCOPE_LINKLOCAL(&sa->sin6_addr))
ia2.s6_addr16[1] = htons(sa->sin6_scope_id);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
return IN6_ARE_ADDR_EQUAL(ia, &ia2);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
}
/*
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
* IPsec output logic for IPv6.
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
*/
int
Change ipsec_address() and ipsec_logsastr() functions to take two additional arguments - buffer and size of this buffer. ipsec_address() is used to convert sockaddr structure to presentation format. The IPv6 part of this function returns pointer to the on-stack buffer and at the moment when it will be used by caller, it becames invalid. IPv4 version uses 4 static buffers and returns pointer to new buffer each time when it called. But anyway it is still possible to get corrupted data when several threads will use this function. ipsec_logsastr() is used to format string about SA entry. It also uses static buffer and has the same problem with concurrent threads. To fix these problems add the buffer pointer and size of this buffer to arguments. Now each caller will pass buffer and its size to these functions. Also convert all places where these functions are used (except disabled code). And now ipsec_address() uses inet_ntop() function from libkern. PR: 185996 Differential Revision: https://reviews.freebsd.org/D2321 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:58:33 +00:00
ipsec6_process_packet(struct mbuf *m, struct ipsecrequest *isr)
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
{
Change ipsec_address() and ipsec_logsastr() functions to take two additional arguments - buffer and size of this buffer. ipsec_address() is used to convert sockaddr structure to presentation format. The IPv6 part of this function returns pointer to the on-stack buffer and at the moment when it will be used by caller, it becames invalid. IPv4 version uses 4 static buffers and returns pointer to new buffer each time when it called. But anyway it is still possible to get corrupted data when several threads will use this function. ipsec_logsastr() is used to format string about SA entry. It also uses static buffer and has the same problem with concurrent threads. To fix these problems add the buffer pointer and size of this buffer to arguments. Now each caller will pass buffer and its size to these functions. Also convert all places where these functions are used (except disabled code). And now ipsec_address() uses inet_ntop() function from libkern. PR: 185996 Differential Revision: https://reviews.freebsd.org/D2321 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:58:33 +00:00
char sbuf[INET6_ADDRSTRLEN], dbuf[INET6_ADDRSTRLEN];
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
struct ipsec_ctx_data ctx;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
struct secasindex saidx;
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
struct secasvar *sav;
struct ip6_hdr *ip6;
int error, i, off;
union sockaddr_union *dst;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
IPSEC_ASSERT(m != NULL, ("ipsec6_process_packet: null mbuf"));
IPSEC_ASSERT(isr != NULL, ("ipsec6_process_packet: null isr"));
In ipsec6_output_tunnel() make sure that the SA contents do not change. The same would apply to ipsec6_output_trans() but there is a larger patch around which already corrected that case. Do not interfere with that one.
2007-05-29 22:44:24 +00:00
IPSECREQUEST_LOCK(isr); /* insure SA contents don't change */
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
isr = ipsec_nextisr(m, isr, AF_INET6, &saidx, &error);
Correct IPsec behaviour with a 'use' level in SP but no SA available. In that case return an continue processing the packet without IPsec. PR: 121384 MFC after: 5 days Reported by: Cyrus Rahman (crahman gmail.com) Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
if (isr == NULL) {
if (error != 0)
goto bad;
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
return EJUSTRETURN;
Correct IPsec behaviour with a 'use' level in SP but no SA available. In that case return an continue processing the packet without IPsec. PR: 121384 MFC after: 5 days Reported by: Cyrus Rahman (crahman gmail.com) Tested by: Cyrus Rahman (crahman gmail.com) [slightly older version]
2008-03-14 16:38:11 +00:00
}
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
sav = isr->sav;
dst = &sav->sah->saidx.dst;
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
IPSEC_INIT_CTX(&ctx, &m, sav, AF_INET6, IPSEC_ENC_BEFORE);
if ((error = ipsec_run_hhooks(&ctx, HHOOK_TYPE_IPSEC_OUT)) != 0)
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
goto bad;
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
Since PFIL can change mbuf pointer, we should update pointers after calling ipsec_filter(). Sponsored by: Yandex LLC
2015-04-28 09:29:28 +00:00
ip6 = mtod(m, struct ip6_hdr *);
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
ip6->ip6_plen = htons(m->m_pkthdr.len - sizeof(*ip6));
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
/* Do the appropriate encapsulation, if necessary */
if (isr->saidx.mode == IPSEC_MODE_TUNNEL || /* Tunnel requ'd */
dst->sa.sa_family != AF_INET6 || /* PF mismatch */
((dst->sa.sa_family == AF_INET6) &&
(!IN6_IS_ADDR_UNSPECIFIED(&dst->sin6.sin6_addr)) &&
(!in6_sa_equal_addrwithscope(&dst->sin6,
&ip6->ip6_dst)))) {
if (m->m_pkthdr.len - sizeof(*ip6) > IPV6_MAXPACKET) {
/* No jumbogram support. */
error = ENXIO; /*XXX*/
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto bad;
}
Remove xform_ipip.c and code related to XF_IP4. The only thing is used from this code is ipip_output() function, that does IPIP encapsulation. Other parts of XF_IP4 code were removed in r275133. Also it isn't possible to configure the use of XF_IP4, nor from userland via setkey(8), nor from the kernel. Simplify the ipip_output() function and rename it to ipsec_encap(). * move IP_DF handling from ipsec4_process_packet() into ipsec_encap(); * since ipsec_encap() called from ipsec[64]_process_packet(), it is safe to assume that mbuf is contiguous at least to IP header for used IP version. Remove all unneeded m_pullup(), m_copydata and related checks. * use V_ip_defttl and V_ip6_defhlim for outer headers; * use V_ip4_ipsec_ecn and V_ip6_ipsec_ecn for outer headers; * move all diagnostic messages to the ipsec_encap() callers; * simplify handling of ipsec_encap() results: if it returns non zero value, print diagnostic message and free mbuf. * some style(9) fixes. Differential Revision: https://reviews.freebsd.org/D2303 Reviewed by: glebius Sponsored by: Yandex LLC
2015-04-18 16:38:45 +00:00
error = ipsec_encap(&m, &sav->sah->saidx);
if (error != 0) {
DPRINTF(("%s: encapsulation for SA %s->%s "
"SPI 0x%08x failed with error %d\n", __func__,
Change ipsec_address() and ipsec_logsastr() functions to take two additional arguments - buffer and size of this buffer. ipsec_address() is used to convert sockaddr structure to presentation format. The IPv6 part of this function returns pointer to the on-stack buffer and at the moment when it will be used by caller, it becames invalid. IPv4 version uses 4 static buffers and returns pointer to new buffer each time when it called. But anyway it is still possible to get corrupted data when several threads will use this function. ipsec_logsastr() is used to format string about SA entry. It also uses static buffer and has the same problem with concurrent threads. To fix these problems add the buffer pointer and size of this buffer to arguments. Now each caller will pass buffer and its size to these functions. Also convert all places where these functions are used (except disabled code). And now ipsec_address() uses inet_ntop() function from libkern. PR: 185996 Differential Revision: https://reviews.freebsd.org/D2321 Reviewed by: gnn Sponsored by: Yandex LLC
2015-04-18 16:58:33 +00:00
ipsec_address(&sav->sah->saidx.src, sbuf,
sizeof(sbuf)),
ipsec_address(&sav->sah->saidx.dst, dbuf,
sizeof(dbuf)), ntohl(sav->spi), error));
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
goto bad;
}
}
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
IPSEC_INIT_CTX(&ctx, &m, sav, dst->sa.sa_family, IPSEC_ENC_AFTER);
if ((error = ipsec_run_hhooks(&ctx, HHOOK_TYPE_IPSEC_OUT)) != 0)
Add sysctls to if_enc(4) to control whether the firewalls or bpf will see inner and outer headers or just inner or outer headers for incoming and outgoing IPsec packets. This is useful in bpf to not have over long lines for debugging or selcting packets based on the inner headers. It also properly defines the behavior of what the firewalls see. Last but not least it gives you if_enc(4) for IPv6 as well. [ As some auxiliary state was not available in the later input path we save it in the tdbi. That way tcpdump can give a consistent view of either of (authentic,confidential) for both before and after states. ] Discussed with: thompsa (2007-04-25, basic idea of unifying paths) Reviewed by: thompsa, gnn
2007-11-28 22:33:53 +00:00
goto bad;
Fixed IPv4-in-IPv6 and IPv6-in-IPv4 IPsec tunnels. For IPv6-in-IPv4, you may need to do the following command on the tunnel interface if it is configured as IPv4 only: ifconfig <interface> inet6 -ifdisabled Code logic inspired from NetBSD. PR: kern/169438 Submitted by: emeric.poupon@netasq.com Reviewed by: fabient, ae Obtained from: NETASQ
2014-05-28 12:45:27 +00:00
switch(dst->sa.sa_family) {
#ifdef INET
case AF_INET:
{
struct ip *ip;
ip = mtod(m, struct ip *);
i = ip->ip_hl << 2;
off = offsetof(struct ip, ip_p);
}
break;
#endif /* AF_INET */
case AF_INET6:
i = sizeof(struct ip6_hdr);
off = offsetof(struct ip6_hdr, ip6_nxt);
break;
default:
DPRINTF(("%s: unsupported protocol family %u\n",
__func__, dst->sa.sa_family));
error = EPFNOSUPPORT;
goto bad;
}
error = (*sav->tdb_xform->xf_output)(m, isr, NULL, i, off);
In ipsec6_output_tunnel() make sure that the SA contents do not change. The same would apply to ipsec6_output_trans() but there is a larger patch around which already corrected that case. Do not interfere with that one.
2007-05-29 22:44:24 +00:00
IPSECREQUEST_UNLOCK(isr);
return error;
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
bad:
Overhaul if_enc(4) and make it loadable in run-time. Use hhook(9) framework to achieve ability of loading and unloading if_enc(4) kernel module. INET and INET6 code on initialization registers two helper hooks points in the kernel. if_enc(4) module uses these helper hook points and registers its hooks. IPSEC code uses these hhook points to call helper hooks implemented in if_enc(4).
2015-11-25 07:31:59 +00:00
IPSEC6STAT_INC(ips_out_inval);
In ipsec6_output_tunnel() make sure that the SA contents do not change. The same would apply to ipsec6_output_trans() but there is a larger patch around which already corrected that case. Do not interfere with that one.
2007-05-29 22:44:24 +00:00
if (isr)
IPSECREQUEST_UNLOCK(isr);
"Fast IPsec": this is an experimental IPsec implementation that is derived from the KAME IPsec implementation, but with heavy borrowing and influence of openbsd. A key feature of this implementation is that it uses the kernel crypto framework to do all crypto work so when h/w crypto support is present IPsec operation is automatically accelerated. Otherwise the protocol implementations are rather differet while the SADB and policy management code is very similar to KAME (for the moment). Note that this implementation is enabled with a FAST_IPSEC option. With this you get all protocols; i.e. there is no FAST_IPSEC_ESP option. FAST_IPSEC and IPSEC are mutually exclusive; you cannot build both into a single system. This software is well tested with IPv4 but should be considered very experimental (i.e. do not deploy in production environments). This software does NOT currently support IPv6. In fact do not configure FAST_IPSEC and INET6 in the same system. Obtained from: KAME + openbsd Supported by: Vernier Networks
2002-10-16 02:10:08 +00:00
if (m)
m_freem(m);
return error;
}
Use IPv4 statistics in ipsec4_process_packet() rather than the IPv6 version. This also unbreaks the NOINET6 builds after r266800.
2014-05-28 23:01:20 +00:00
#endif /*INET6*/
Reference in New Issue Copy Permalink