freebsd-dev/etc/etc.i386/ttys

#
# $FreeBSD$
#	@(#)ttys	5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name	getty				type	status		comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console	none				unknown	off secure
#
ttyv0	"/usr/libexec/getty Pc"		xterm	onifexists secure
# Virtual terminals
ttyv1	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv2	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv3	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv4	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv5	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv6	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv7	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu1	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu2	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu3	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
# Dumb console
dcons	"/usr/libexec/getty std.9600"	vt100	off secure
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`#`
$Id$ -> $FreeBSD$ 1999-08-27 23:37:10 +00:00			`# $FreeBSD$`
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`# @(#)ttys 5.1 (Berkeley) 4/17/89`
			`#`
Reviewed by: jkh Submitted by: wes Added commentary to ttys to clarify the meaning of the columns. Added commentary to ttys to clarify the meaning of the columns. 1999-02-09 23:55:13 +00:00			`# This file specifies various information about terminals on the system.`
			`# It is used by several different programs. Common entries for the`
Grammar and formatting touch-ups to comments. 1999-08-22 19:42:40 +00:00			`# various columns include:`
Reviewed by: jkh Submitted by: wes Added commentary to ttys to clarify the meaning of the columns. Added commentary to ttys to clarify the meaning of the columns. 1999-02-09 23:55:13 +00:00			`#`
			`# name The name of the terminal device.`
			`#`
			`# getty The program to start running on the terminal. Typically a`
			`# getty program, as the name implies. Other common entries`
Grammar and formatting touch-ups to comments. 1999-08-22 19:42:40 +00:00			`# include none, when no getty is needed, and xdm, to start the`
Reviewed by: jkh Submitted by: wes Added commentary to ttys to clarify the meaning of the columns. Added commentary to ttys to clarify the meaning of the columns. 1999-02-09 23:55:13 +00:00			`# X Window System.`
			`#`
			`# type The initial terminal type for this port. For hardwired`
Grammar and formatting touch-ups to comments. 1999-08-22 19:42:40 +00:00			`# terminal lines, this will contain the type of terminal used.`
Convert syscons on i386 to TERM=xterm. TEKEN_XTERM is now gone. Because we always use xterm mode now, we only need a TEKEN_CONS25 switch to go back to cons25. 2009-11-13 11:28:54 +00:00			`# For virtual consoles, the correct type is typically xterm.`
Remove the reference to pseudo-terminals from the description. Pseudo-terminals are no longer listed in this file, since the utmpx implementation doesn't depend on ttyslot(). 2011-03-30 08:22:29 +00:00			`# Other common values include dialup for incoming modem ports, and`
			`# unknown when the terminal type cannot be predetermined.`
Reviewed by: jkh Submitted by: wes Added commentary to ttys to clarify the meaning of the columns. Added commentary to ttys to clarify the meaning of the columns. 1999-02-09 23:55:13 +00:00			`#`
			`# status Must be on or off. If on, init will run the getty program on`
Grammar and formatting touch-ups to comments. 1999-08-22 19:42:40 +00:00			`# the specified port. If the word "secure" appears, this tty`
			`# allows root login.`
Reviewed by: jkh Submitted by: wes Added commentary to ttys to clarify the meaning of the columns. Added commentary to ttys to clarify the meaning of the columns. 1999-02-09 23:55:13 +00:00			`#`
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`# name getty type status comments`
			`#`
Grammar and formatting touch-ups to comments. 1999-08-22 19:42:40 +00:00			`# If console is marked "insecure", then init will ask for the root password`
			`# when going to single-user mode.`
Revert to rev 1.6 until post 4.0-R. As probably 98% of i386 installs happen with a keyboard and monitor the console change was not as needed in the i386 case as the Alpha case. IMO >50% of Alpha installs are using a serial console, the change matching rev 1.7 should not be backed out. 2000-01-29 12:18:03 +00:00			`console none unknown off secure`
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`#`
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169 2018-05-09 20:49:00 +00:00			`ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure`
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`# Virtual terminals`
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169 2018-05-09 20:49:00 +00:00			`ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure`
Remove more vestiges of /usr/X11R6, but leave mtree for portmgr. 2007-05-29 06:37:58 +00:00			`ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure`
Moved from directory above. It is i386 specific. 1998-05-16 21:29:17 +00:00			`# Serial terminals`
			`# The 'dialup' keyword identifies dialin lines to login, fingerd etc.`
Convert the potential console port over to using 3wire, for i386/amd64. (This change was already in place for other arches via r262957) Reviewed by: nwhitehorn MFC after: 1 week 2014-06-17 18:51:03 +00:00			`ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
Enable all callin ttys if the tty is an available console. Discussed on: -arch@ (no objections) MFC after: 1 week Sponsored by: The FreeBSD Foundation 2015-10-20 16:10:46 +00:00			`ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
			`ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
			`ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
Add dumb console driver and related bits. dcons(4): very simple console and gdb port driver dcons_crom(4): FireWire attachment dconschat(8): User interface to dcons Tested with: i386, i386-PAE, and sparc64. 2003-10-24 15:44:10 +00:00			`# Dumb console`
			`dcons "/usr/libexec/getty std.9600" vt100 off secure`