freebsd-dev/usr.sbin/sysinstall/dist.c

911 lines
25 KiB
C
Raw Normal View History

/*
* The new sysinstall program.
*
* This is probably the last program in the `sysinstall' line - the next
* generation being essentially a complete rewrite.
*
1999-08-28 01:35:59 +00:00
* $FreeBSD$
*
* Copyright (c) 1995
* Jordan Hubbard. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
1995-05-30 08:29:07 +00:00
* notice, this list of conditions and the following disclaimer,
* verbatim and that no modifications are made prior to this
* point in the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY JORDAN HUBBARD ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL JORDAN HUBBARD OR HIS PETS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include "sysinstall.h"
#include <sys/param.h>
#include <sys/mount.h>
#include <sys/time.h>
#include <sys/uio.h>
#include <ctype.h>
#include <signal.h>
1998-10-14 11:23:48 +00:00
#include <libutil.h>
unsigned int Dists;
unsigned int SrcDists;
unsigned int XOrgDists;
unsigned int KernelDists;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
enum _disttype { DT_TARBALL, DT_SUBDIST, DT_PACKAGE };
typedef struct _dist {
char *my_name;
unsigned int *my_mask;
unsigned int my_bit;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
enum _disttype my_type;
union {
char *my_string; /* DT_TARBALL & DT_PACKAGE */
struct _dist *my_dist; /* DT_SUBDIST */
} my_data;
} Distribution;
static Distribution KernelDistTable[];
static Distribution SrcDistTable[];
static Distribution XOrgDistTable[];
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
#define DTE_TARBALL(name, mask, flag, directory) \
{ name, mask, DIST_ ## flag, DT_TARBALL, { directory } }
#define DTE_PACKAGE(name, mask, flag, package) \
{ name, mask, DIST_ ## flag, DT_PACKAGE, { package } }
#define DTE_SUBDIST(name, mask, flag, subdist) \
{ name, mask, DIST_ ## flag, DT_SUBDIST, { .my_dist = subdist } }
#define DTE_END { NULL, NULL, 0, 0, { NULL } }
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
#define BASE_DIST (&DistTable[0])
/* The top-level distribution categories */
static Distribution DistTable[] = {
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("base", &Dists, BASE, "/"),
DTE_SUBDIST("kernels", &Dists, KERNEL, KernelDistTable),
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("doc", &Dists, DOC, "/"),
DTE_TARBALL("games", &Dists, GAMES, "/"),
DTE_TARBALL("manpages", &Dists, MANPAGES, "/"),
DTE_TARBALL("catpages", &Dists, CATPAGES, "/"),
DTE_TARBALL("proflibs", &Dists, PROFLIBS, "/"),
DTE_TARBALL("dict", &Dists, DICT, "/"),
DTE_TARBALL("info", &Dists, INFO, "/"),
#ifdef __amd64__
DTE_TARBALL("lib32", &Dists, LIB32, "/"),
#endif
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_SUBDIST("src", &Dists, SRC, SrcDistTable),
DTE_TARBALL("ports", &Dists, PORTS, "/usr"),
DTE_TARBALL("local", &Dists, LOCAL, "/"),
DTE_SUBDIST("X.Org", &Dists, XORG, XOrgDistTable),
DTE_END,
};
/* The kernel distributions */
static Distribution KernelDistTable[] = {
DTE_TARBALL("GENERIC", &KernelDists, KERNEL_GENERIC, "/boot"),
#ifdef WITH_SMP
DTE_TARBALL("SMP", &KernelDists, KERNEL_SMP, "/boot"),
#endif
DTE_END,
};
/* The /usr/src distribution */
static Distribution SrcDistTable[] = {
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("sbase", &SrcDists, SRC_BASE, "/usr/src"),
DTE_TARBALL("scontrib", &SrcDists, SRC_CONTRIB, "/usr/src"),
DTE_TARBALL("scrypto", &SrcDists, SRC_SCRYPTO, "/usr/src"),
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("sgnu", &SrcDists, SRC_GNU, "/usr/src"),
DTE_TARBALL("setc", &SrcDists, SRC_ETC, "/usr/src"),
DTE_TARBALL("sgames", &SrcDists, SRC_GAMES, "/usr/src"),
DTE_TARBALL("sinclude", &SrcDists, SRC_INCLUDE, "/usr/src"),
DTE_TARBALL("skrb5", &SrcDists, SRC_SKERBEROS5, "/usr/src"),
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("slib", &SrcDists, SRC_LIB, "/usr/src"),
DTE_TARBALL("slibexec", &SrcDists, SRC_LIBEXEC, "/usr/src"),
DTE_TARBALL("srelease", &SrcDists, SRC_RELEASE, "/usr/src"),
DTE_TARBALL("sbin", &SrcDists, SRC_BIN, "/usr/src"),
DTE_TARBALL("ssecure", &SrcDists, SRC_SSECURE, "/usr/src"),
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
DTE_TARBALL("ssbin", &SrcDists, SRC_SBIN, "/usr/src"),
DTE_TARBALL("sshare", &SrcDists, SRC_SHARE, "/usr/src"),
DTE_TARBALL("ssys", &SrcDists, SRC_SYS, "/usr/src"),
DTE_TARBALL("subin", &SrcDists, SRC_UBIN, "/usr/src"),
DTE_TARBALL("susbin", &SrcDists, SRC_USBIN, "/usr/src"),
DTE_TARBALL("stools", &SrcDists, SRC_TOOLS, "/usr/src"),
DTE_TARBALL("srescue", &SrcDists, SRC_RESCUE, "/usr/src"),
DTE_END,
};
/* The X.Org distribution */
static Distribution XOrgDistTable[] = {
DTE_PACKAGE("Xbin", &XOrgDists, XORG_CLIENTS, "xorg-clients"),
DTE_PACKAGE("Xlib", &XOrgDists, XORG_LIB, "xorg-libraries"),
DTE_PACKAGE("Xman", &XOrgDists, XORG_MAN, "xorg-manpages"),
DTE_PACKAGE("Xdoc", &XOrgDists, XORG_DOC, "xorg-documents"),
DTE_PACKAGE("Xprog", &XOrgDists, XORG_IMAKE, "imake"),
DTE_PACKAGE("Xsrv", &XOrgDists, XORG_SERVER, "xorg-server"),
DTE_PACKAGE("Xnest", &XOrgDists, XORG_NESTSERVER, "xorg-nestserver"),
DTE_PACKAGE("Xprt", &XOrgDists, XORG_PRINTSERVER, "xorg-printserver"),
DTE_PACKAGE("Xvfb", &XOrgDists, XORG_VFBSERVER, "xorg-vfbserver"),
DTE_PACKAGE("Xfmsc", &XOrgDists, XORG_FONTS_MISC, "xorg-fonts-miscbitmaps"),
DTE_PACKAGE("Xf75", &XOrgDists, XORG_FONTS_75, "xorg-fonts-75dpi"),
DTE_PACKAGE("Xf100", &XOrgDists, XORG_FONTS_100, "xorg-fonts-100dpi"),
DTE_PACKAGE("Xfcyr", &XOrgDists, XORG_FONTS_CYR, "xorg-fonts-cyrillic"),
DTE_PACKAGE("Xft1", &XOrgDists, XORG_FONTS_T1, "xorg-fonts-type1"),
DTE_PACKAGE("Xftt", &XOrgDists, XORG_FONTS_TT, "xorg-fonts-truetype"),
DTE_PACKAGE("Xfs", &XOrgDists, XORG_FONTSERVER, "xorg-fontserver"),
DTE_END,
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
};
1997-03-10 21:11:57 +00:00
static int distMaybeSetPorts(dialogMenuItem *self);
static void
distVerifyFlags(void)
{
if (SrcDists)
Dists |= DIST_SRC;
if (XOrgDists)
Dists |= DIST_XORG;
if (KernelDists)
Dists |= DIST_KERNEL;
if (isDebug()) {
msgDebug("Dist Masks: Dists: %0x, Srcs: %0x Kernels: %0x\n", Dists,
SrcDists, KernelDists);
msgDebug("XServer: %0x\n", XOrgDists);
}
}
1995-06-11 19:33:05 +00:00
int
distReset(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
Dists = 0;
SrcDists = 0;
XOrgDists = 0;
KernelDists = 0;
return DITEM_SUCCESS | DITEM_REDRAW;
}
int
distConfig(dialogMenuItem *self)
{
char *cp;
distReset(NULL);
if ((cp = variable_get(VAR_DIST_MAIN)) != NULL)
Dists = atoi(cp);
if ((cp = variable_get(VAR_DIST_SRC)) != NULL)
SrcDists = atoi(cp);
if ((cp = variable_get(VAR_DIST_X11)) != NULL)
XOrgDists = atoi(cp);
if ((cp = variable_get(VAR_DIST_KERNEL)) != NULL)
KernelDists = atoi(cp);
distVerifyFlags();
return DITEM_SUCCESS | DITEM_REDRAW;
}
static int
distSetX(void)
{
Dists |= DIST_XORG;
XOrgDists = DIST_XORG_MISC_ALL | DIST_XORG_SERVER | _DIST_XORG_FONTS_BASE;
return distSetXOrg(NULL);
}
int
selectKernel(void)
{
#ifdef WITH_SMP
/* select default kernel based on deduced cpu count */
return NCpus > 1 ? DIST_KERNEL_SMP : DIST_KERNEL_GENERIC;
#else
return DIST_KERNEL_GENERIC;
#endif
}
1995-06-11 19:33:05 +00:00
int
distSetDeveloper(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
1995-06-11 19:33:05 +00:00
distReset(NULL);
Dists = _DIST_DEVELOPER;
SrcDists = DIST_SRC_ALL;
KernelDists = selectKernel();
i = distMaybeSetPorts(self);
distVerifyFlags();
return i;
1995-06-11 19:33:05 +00:00
}
int
distSetXDeveloper(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
i = distSetDeveloper(self);
i |= distSetX();
distVerifyFlags();
return i;
1995-06-11 19:33:05 +00:00
}
int
distSetKernDeveloper(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
1995-06-11 19:33:05 +00:00
distReset(NULL);
Dists = _DIST_DEVELOPER;
SrcDists = DIST_SRC_SYS | DIST_SRC_BASE;
KernelDists = selectKernel();
i = distMaybeSetPorts(self);
distVerifyFlags();
return i;
1995-06-11 19:33:05 +00:00
}
int
distSetXKernDeveloper(dialogMenuItem *self)
{
int i;
i = distSetKernDeveloper(self);
i |= distSetX();
distVerifyFlags();
return i;
}
1995-06-11 19:33:05 +00:00
int
distSetUser(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
1995-06-11 19:33:05 +00:00
distReset(NULL);
Dists = _DIST_USER;
KernelDists = selectKernel();
i = distMaybeSetPorts(self);
distVerifyFlags();
return i;
1995-06-11 19:33:05 +00:00
}
int
distSetXUser(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
i = distSetUser(self);
i |= distSetX();
distVerifyFlags();
return i;
1995-06-11 19:33:05 +00:00
}
int
distSetMinimum(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
distReset(NULL);
Dists = DIST_BASE | DIST_KERNEL;
KernelDists = selectKernel();
distVerifyFlags();
return DITEM_SUCCESS | DITEM_REDRAW;
1995-06-11 19:33:05 +00:00
}
int
distSetEverything(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
Dists = DIST_ALL;
1995-06-11 19:33:05 +00:00
SrcDists = DIST_SRC_ALL;
XOrgDists = DIST_XORG_ALL;
KernelDists = DIST_KERNEL_ALL;
i = distMaybeSetPorts(self);
distVerifyFlags();
return i | DITEM_REDRAW;
}
1997-03-10 21:11:57 +00:00
static int
distMaybeSetPorts(dialogMenuItem *self)
{
dialog_clear_norefresh();
1997-03-10 21:11:57 +00:00
if (!msgYesNo("Would you like to install the FreeBSD ports collection?\n\n"
"This will give you ready access to over 14,900 ported software packages,\n"
"at a cost of around 440MB of disk space when \"clean\" and possibly\n"
"much more than that when a lot of the distribution tarballs are loaded\n"
"(unless you have the extra discs available from a FreeBSD CD/DVD distribution\n"
1999-02-14 18:53:17 +00:00
"and can mount them on /cdrom, in which case this is far less of a problem).\n\n"
"The ports collection is a very valuable resource and well worth having\n"
"on your /usr partition, so it is advisable to say Yes to this option.\n\n"
"For more information on the ports collection & the latest ports, visit:\n"
" http://www.freebsd.org/ports\n"))
1997-03-10 21:11:57 +00:00
Dists |= DIST_PORTS;
else
Dists &= ~DIST_PORTS;
return DITEM_SUCCESS | DITEM_RESTORE;
1997-03-10 21:11:57 +00:00
}
static Boolean
distSetByName(Distribution *dist, char *name)
{
int i, status = FALSE;
/* Loop through current set */
for (i = 0; dist[i].my_name; i++) {
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
switch (dist[i].my_type) {
case DT_TARBALL:
case DT_PACKAGE:
if (!strcmp(dist[i].my_name, name)) {
*(dist[i].my_mask) |= dist[i].my_bit;
status = TRUE;
}
break;
case DT_SUBDIST:
if (distSetByName(dist[i].my_data.my_dist, name)) {
status = TRUE;
1997-09-16 10:14:23 +00:00
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
break;
}
}
distVerifyFlags();
return status;
}
static Boolean
distUnsetByName(Distribution *dist, char *name)
{
int i, status = FALSE;
/* Loop through current set */
for (i = 0; dist[i].my_name; i++) {
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
switch (dist[i].my_type) {
case DT_TARBALL:
case DT_PACKAGE:
if (!strcmp(dist[i].my_name, name)) {
*(dist[i].my_mask) &= ~(dist[i].my_bit);
status = TRUE;
}
break;
case DT_SUBDIST:
if (distUnsetByName(dist[i].my_data.my_dist, name)) {
status = TRUE;
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
break;
}
}
return status;
}
/* Just for the dispatch stuff */
int
distSetCustom(dialogMenuItem *self)
{
char *cp, *cp2, *tmp;
if (!(tmp = variable_get(VAR_DISTS))) {
msgDebug("distSetCustom() called without %s variable set.\n", VAR_DISTS);
return DITEM_FAILURE;
}
cp = alloca(strlen(tmp) + 1);
if (!cp)
2001-09-22 23:17:37 +00:00
msgFatal("Couldn't alloca() %d bytes!\n", (int)(strlen(tmp) + 1));
strcpy(cp, tmp);
while (cp) {
if ((cp2 = index(cp, ' ')) != NULL)
*(cp2++) = '\0';
if (!distSetByName(DistTable, cp))
msgDebug("distSetCustom: Warning, no such release \"%s\"\n", cp);
cp = cp2;
}
distVerifyFlags();
return DITEM_SUCCESS;
}
/* Just for the dispatch stuff */
int
distUnsetCustom(dialogMenuItem *self)
{
char *cp, *cp2, *tmp;
if (!(tmp = variable_get(VAR_DISTS))) {
msgDebug("distUnsetCustom() called without %s variable set.\n", VAR_DISTS);
return DITEM_FAILURE;
}
cp = alloca(strlen(tmp) + 1);
if (!cp)
2001-09-22 23:17:37 +00:00
msgFatal("Couldn't alloca() %d bytes!\n", (int)(strlen(tmp) + 1));
strcpy(cp, tmp);
while (cp) {
if ((cp2 = index(cp, ' ')) != NULL)
*(cp2++) = '\0';
if (!distUnsetByName(DistTable, cp))
msgDebug("distUnsetCustom: Warning, no such release \"%s\"\n", cp);
cp = cp2;
}
return DITEM_SUCCESS;
}
1995-06-11 19:33:05 +00:00
int
distSetSrc(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i;
dialog_clear_norefresh();
if (!dmenuOpenSimple(&MenuSrcDistributions, FALSE))
i = DITEM_FAILURE;
else
i = DITEM_SUCCESS;
distVerifyFlags();
return i | DITEM_RESTORE;
1995-06-11 19:33:05 +00:00
}
int
distSetXOrg(dialogMenuItem *self)
1995-06-11 19:33:05 +00:00
{
int i = DITEM_SUCCESS;
dialog_clear_norefresh();
if (!dmenuOpenSimple(&MenuXOrgSelect, FALSE))
i = DITEM_FAILURE;
distVerifyFlags();
return i | DITEM_RESTORE;
1995-06-11 19:33:05 +00:00
}
int
distSetKernel(dialogMenuItem *self)
{
int i;
dialog_clear_norefresh();
if (!dmenuOpenSimple(&MenuKernelDistributions, FALSE))
i = DITEM_FAILURE;
else
i = DITEM_SUCCESS;
distVerifyFlags();
return i | DITEM_RESTORE;
}
static Boolean got_intr = FALSE;
/* timeout handler */
static void
handle_intr(int sig)
{
msgDebug("User generated interrupt.\n");
got_intr = TRUE;
}
static int
check_for_interrupt(void)
{
if (got_intr) {
got_intr = FALSE;
return TRUE;
}
return FALSE;
}
/*
* translate distribution filename to lower case
* as doTARBALL does in release/Makefile
*/
static void
translateDist(char trdist[PATH_MAX], const char *dist)
{
int j;
/*
* translate distribution filename to lower case
* as doTARBALL does in release/Makefile
*/
for (j = 0; j < PATH_MAX-1 && dist[j] != '\0'; j++)
trdist[j] = tolower(dist[j]);
trdist[j] = '\0';
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/*
* Try to get distribution as multiple pieces, locating and parsing an
* info file which tells us how many we need for this distribution.
*/
static Boolean
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
distExtractTarball(char *path, char *dist, char *my_dir, int is_base)
{
char *buf = NULL, trdist[PATH_MAX], fname[PATH_MAX];
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
struct timeval start, stop;
2004-03-11 18:50:05 +00:00
int j, status, total, intr;
int cpid, zpid, fd2, chunk, numchunks;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
properties dist_attr = NULL;
const char *tmp;
FILE *fp;
translateDist(trdist, dist);
if (isDebug())
msgDebug("%s: path \"%s\" dist \"%s\" trdist \"%s\" "
"my_dir \"%s\" %sis_base\n",
__func__, path, dist, trdist, my_dir, is_base ? "" : "!");
1995-06-11 19:33:05 +00:00
status = TRUE;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
numchunks = 0;
snprintf(fname, sizeof (fname), "%s/%s.inf", path, trdist);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
getinfo:
fp = DEVICE_GET(mediaDevice, fname, TRUE);
intr = check_for_interrupt();
if (fp == (FILE *)IO_ERROR || intr || !mediaDevice) {
if (isDebug())
msgDebug("%s: fname %s fp: %p, intr: %d mediaDevice: %p\n",
__func__, fname, fp, intr, mediaDevice);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/* Hard error, can't continue */
if (!msgYesNo("Unable to open %s: %s.\nReinitialize media?",
fname, !intr ? "I/O error." : "User interrupt.")) {
DEVICE_SHUTDOWN(mediaDevice);
if (!DEVICE_INIT(mediaDevice))
return (FALSE);
goto getinfo;
} else
return (FALSE);
} else if (fp == NULL) {
/* No attributes file, so try as a single file. */
snprintf(fname, sizeof(fname), "%s/%s.%s", path, trdist,
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
USE_GZIP ? "tgz" : "tbz");
if (isDebug())
msgDebug("%s: fp is NULL (1) fname: %s\n", __func__, fname);
/*
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
* Passing TRUE as 3rd parm to get routine makes this a "probing"
* get, for which errors are not considered too significant.
*/
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
getsingle:
fp = DEVICE_GET(mediaDevice, fname, TRUE);
intr = check_for_interrupt();
if (fp == (FILE *)IO_ERROR || intr || !mediaDevice) {
if (isDebug())
msgDebug("%s: fname %s fp: %p, intr: %d mediaDevice: %p\n",
__func__, fname, fp, intr, mediaDevice);
/* Hard error, can't continue */
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
msgConfirm("Unable to open %s: %s", fname,
!intr ? "I/O error" : "User interrupt");
DEVICE_SHUTDOWN(mediaDevice);
if (!DEVICE_INIT(mediaDevice))
return (FALSE);
goto getsingle;
} else if (fp != NULL) {
char *dir = root_bias(my_dir);
1997-03-15 18:01:45 +00:00
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
dialog_clear_norefresh();
msgNotify("Extracting %s into %s directory...", dist, dir);
status = mediaExtractDist(dir, dist, fp);
fclose(fp);
return (status);
} else {
if (isDebug())
msgDebug("%s: fp is NULL (2) fname %s\n", __func__, fname);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
return (FALSE);
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
if (isDebug())
msgDebug("Parsing attributes file for distribution %s\n", dist);
dist_attr = properties_read(fileno(fp));
intr = check_for_interrupt();
if (intr || !dist_attr) {
if (isDebug())
msgDebug("%s: intr %d dist_attr %p\n", __func__, intr, dist_attr);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
msgConfirm("Cannot parse information file for the %s distribution: %s\n"
"Please verify that your media is valid and try again.",
dist, !intr ? "I/O error" : "User interrupt");
} else {
tmp = property_find(dist_attr, "Pieces");
if (tmp)
numchunks = strtol(tmp, 0, 0);
}
fclose(fp);
if (!numchunks) {
if (isDebug())
msgDebug("%s: numchunks is zero\n", __func__);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
return (TRUE);
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
if (isDebug())
msgDebug("Attempting to extract distribution from %u chunks.\n",
numchunks);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
total = 0;
(void)gettimeofday(&start, (struct timezone *)NULL);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/* We have one or more chunks, initialize unpackers... */
mediaExtractDistBegin(root_bias(my_dir), &fd2, &zpid, &cpid);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/* And go for all the chunks */
dialog_clear_norefresh();
for (chunk = 0; chunk < numchunks; chunk++) {
int n, retval, last_msg, chunksize, realsize;
char prompt[80];
last_msg = 0;
getchunk:
snprintf(fname, sizeof(fname), "cksum.%c%c", (chunk / 26) + 'a',
(chunk % 26) + 'a');
tmp = property_find(dist_attr, fname);
chunksize = 0;
if (tmp) {
tmp = index(tmp, ' ');
chunksize = strtol(tmp, 0, 0);
}
snprintf(fname, sizeof(fname), "%s/%s.%c%c", path, trdist, (chunk / 26) + 'a',
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
(chunk % 26) + 'a');
if (isDebug())
msgDebug("trying for piece %d of %d: %s\n", chunk + 1, numchunks,
fname);
fp = DEVICE_GET(mediaDevice, fname, FALSE);
intr = check_for_interrupt();
/* XXX: this can't work if we get an I/O error */
if (fp <= (FILE *)NULL || intr) {
if (fp == NULL)
msgConfirm("Failed to find %s on this media. Reinitializing media.", fname);
else
msgConfirm("Failed to retreive piece file %s.\n"
"%s: Reinitializing media.",
fname, !intr ? "I/O error" : "User interrupt");
DEVICE_SHUTDOWN(mediaDevice);
if (!DEVICE_INIT(mediaDevice))
goto punt;
else
goto getchunk;
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
snprintf(prompt, sizeof(prompt), "Extracting %s into %s directory...",
dist, root_bias(my_dir));
dialog_gauge("Progress", prompt, 8, 15, 6, 50,
(chunk + 1) * 100 / numchunks);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
buf = safe_realloc(buf, chunksize);
realsize = 0;
while (1) {
int seconds;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
n = fread(buf + realsize, 1, BUFSIZ, fp);
if (check_for_interrupt()) {
msgConfirm("Media read error: User interrupt.");
fclose(fp);
goto punt;
} else if (n <= 0)
break;
total += n;
realsize += n;
/* Print statistics about how we're doing */
(void) gettimeofday(&stop, (struct timezone *)0);
stop.tv_sec = stop.tv_sec - start.tv_sec;
stop.tv_usec = stop.tv_usec - start.tv_usec;
if (stop.tv_usec < 0)
stop.tv_sec--, stop.tv_usec += 1000000;
seconds = stop.tv_sec + (stop.tv_usec / 1000000.0);
if (!seconds)
seconds = 1;
if (seconds != last_msg) {
last_msg = seconds;
msgInfo("%10d bytes read from %s dist, chunk %2d of %2d @ %.1f KBytes/sec.",
total, dist, chunk + 1, numchunks,
(total / seconds) / 1000.0);
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
}
fclose(fp);
if (!chunksize || (realsize == chunksize)) {
/* No substitution necessary */
retval = write(fd2, buf, realsize);
if (retval != realsize) {
fclose(fp);
dialog_clear_norefresh();
msgConfirm("Write failure on transfer! (wrote %d bytes of %d bytes)", retval, realsize);
goto punt;
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
}
} else {
for (j = 0; j < realsize; j++) {
/* On finding CRLF, skip the CR; don't exceed end of buffer. */
if ((buf[j] != 0x0d) || (j == total - 1) || (buf[j + 1] != 0x0a)) {
retval = write(fd2, buf + j, 1);
if (retval != 1) {
fclose(fp);
dialog_clear_norefresh();
msgConfirm("Write failure on transfer! (wrote %d bytes of %d bytes)", j, chunksize);
goto punt;
}
}
}
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
}
goto done;
punt:
status = FALSE;
done:
properties_free(dist_attr);
close(fd2);
if (status != FALSE)
status = mediaExtractDistEnd(zpid, cpid);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
else
(void)mediaExtractDistEnd(zpid, cpid);
safe_free(buf);
return (status);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
static Boolean
distExtract(char *parent, Distribution *me)
{
int i, status;
char *path, *dist;
WINDOW *w = savescr();
struct sigaction old, new;
status = TRUE;
if (isDebug())
msgDebug("distExtract: parent: %s, me: %s\n", parent ? parent : "(none)", me->my_name);
/* Make ^C fake a sudden timeout */
new.sa_handler = handle_intr;
new.sa_flags = 0;
(void)sigemptyset(&new.sa_mask);
dialog_clear_norefresh();
dialog_msgbox("Please Wait", "Extracting all requested distributions...", -1, -1, 0);
sigaction(SIGINT, &new, &old);
/* Loop through to see if we're in our parent's plans */
for (i = 0; me[i].my_name; i++) {
dist = me[i].my_name;
path = parent ? parent : dist;
/* If our bit isn't set, go to the next */
if (!(me[i].my_bit & *(me[i].my_mask)))
continue;
switch (me[i].my_type) {
case DT_SUBDIST:
/* Recurse if we actually have a sub-distribution */
status = distExtract(dist, me[i].my_data.my_dist);
if (!status) {
dialog_clear_norefresh();
1997-03-15 18:01:45 +00:00
msgConfirm("Unable to transfer all components of the %s distribution.\n"
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
"You may wish to switch media types and try again.\n",
me[i].my_name);
1997-03-15 18:01:45 +00:00
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
break;
case DT_PACKAGE:
dialog_clear_norefresh();
msgNotify("Installing %s distribution...", dist);
status = (package_add(me[i].my_data.my_string) == DITEM_SUCCESS);
if (!status)
dialog_clear_norefresh();
break;
case DT_TARBALL:
status = distExtractTarball(path, dist, me[i].my_data.my_string,
&me[i] == BASE_DIST);
if (!status) {
dialog_clear_norefresh();
if (me[i].my_bit != DIST_LOCAL) {
status = msgYesNo("Unable to transfer the %s distribution from\n%s.\n\n"
"Do you want to try to retrieve it again?",
me[i].my_name, mediaDevice->name);
if (!status)
--i;
status = FALSE;
}
1995-06-11 19:33:05 +00:00
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
break;
}
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/*
* If extract was successful, remove ourselves from further
* consideration.
*/
1995-06-11 19:33:05 +00:00
if (status)
*(me[i].my_mask) &= ~(me[i].my_bit);
}
sigaction(SIGINT, &old, NULL); /* Restore signal handler */
restorescr(w);
return status;
}
static void
1996-05-29 03:27:31 +00:00
printSelected(char *buf, int selected, Distribution *me, int *col)
{
int i;
/* Loop through to see if we're in our parent's plans */
for (i = 0; me[i].my_name; i++) {
/* If our bit isn't set, go to the next */
if (!(me[i].my_bit & selected))
continue;
1996-05-29 03:27:31 +00:00
*col += strlen(me[i].my_name);
if (*col > 50) {
*col = 0;
strcat(buf, "\n");
}
sprintf(&buf[strlen(buf)], " %s", me[i].my_name);
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/* Recurse if have a sub-distribution */
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
if (me[i].my_type == DT_SUBDIST)
printSelected(buf, *(me[i].my_mask), me[i].my_data.my_dist, col);
}
}
int
distExtractAll(dialogMenuItem *self)
{
int old_dists, old_kernel, retries = 0, status = DITEM_SUCCESS;
char buf[512];
WINDOW *w;
/* paranoia */
1997-03-08 12:58:29 +00:00
if (!Dists) {
if (!dmenuOpenSimple(&MenuSubDistributions, FALSE) || !Dists)
return DITEM_FAILURE;
1997-03-08 12:58:29 +00:00
}
if (!mediaVerify() || !DEVICE_INIT(mediaDevice))
return DITEM_FAILURE;
old_dists = Dists;
old_kernel = KernelDists;
distVerifyFlags();
dialog_clear_norefresh();
w = savescr();
msgNotify("Attempting to install all selected distributions..");
/* Try for 3 times around the loop, then give up. */
while (Dists && ++retries < 3)
distExtract(NULL, DistTable);
1995-06-11 19:33:05 +00:00
1999-12-18 02:29:24 +00:00
dialog_clear_norefresh();
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
/* Only do base fixup if base dist was successfully extracted */
if ((old_dists & DIST_BASE) && !(Dists & DIST_BASE))
- Rename installFixupBin to installFixupBase to finish up the 'bin' to 'base' dist rename. - Rework struct dist to allow for different types of dists. There are currently three types of dists: DT_TARBALL, the traditonal gzipped and split tar file; DT_PACKAGE, a package; and DT_SUBDIST, a meta-dist in the tree that has its own array of dists as its contents. For example, the 'base' dist is a DT_TARBALL dist, the 'perl' dist is a DT_PACKAGE dist, and the 'src' dist is a DT_SUBDIST dist with its own dist table that contains 'sbase', 'ssys', etc. - Add helper macros for defining array entries for the different types of dists to try and make the statically defined dist table in dist.c more readable. - Split the logic to deal with a DT_TARBALL dist out of distExtract() and into its own distExtractTarball() function. distExtract() now calls other functions to extract each dist. - Tweak the percentage complete calculation in distExtractTarball() to do the multiply prior to the divide so it doesn't have to use floating point. - Axe the installPackage() function along with the special handling for the perl and XFree86 dists in distExtractAll() since distExtract() handles package dists directly now. - Add back in subdists for the X packages based on the split up packages that XFree86-4 uses that as closely map to the X dists we used with X 3.3.x. - Lots of things like distSetX() and the X dist masks are no longer #ifndef X_AS_PKG since we use them in both cases now. - Make the entire installFixupXFree() function #ifndef X_AS_PKG, we only call it in that case anyways, and it's not suitable for the X_AS_PKG case. - Add in X dist menus for the X_AS_PKG case. Approved by: re
2003-01-17 19:05:32 +00:00
status |= installFixupBase(self);
2006-04-14 18:34:57 +00:00
/* Only do kernel fixup if kernel dist was successfully extracted */
if ((old_dists & DIST_KERNEL) && !(Dists & DIST_KERNEL))
status |= installFixupKernel(self, old_kernel);
/* Clear any local dist flags now */
Dists &= ~DIST_LOCAL;
if (Dists) {
1996-05-29 03:27:31 +00:00
int col = 0;
buf[0] = '\0';
1999-12-18 02:29:24 +00:00
dialog_clear_norefresh();
1996-05-29 03:27:31 +00:00
printSelected(buf, Dists, DistTable, &col);
dialog_clear_norefresh();
if (col) {
msgConfirm("Couldn't extract the following distributions. This may\n"
"be because they were not available on the installation\n"
"media you've chosen:\n\n\t%s", buf);
}
}
restorescr(w);
return status;
}