freebsd-dev/module/zfs/metaslab.c

3605 lines
102 KiB
C
Raw Normal View History

2008-11-20 20:01:55 +00:00
/*
* CDDL HEADER START
*
* The contents of this file are subject to the terms of the
* Common Development and Distribution License (the "License").
* You may not use this file except in compliance with the License.
*
* You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
* or http://www.opensolaris.org/os/licensing.
* See the License for the specific language governing permissions
* and limitations under the License.
*
* When distributing Covered Code, include this CDDL HEADER in each
* file and include the License file at usr/src/OPENSOLARIS.LICENSE.
* If applicable, add the following below this CDDL HEADER, with the
* fields enclosed by brackets "[]" replaced with your own identifying
* information: Portions Copyright [yyyy] [name of copyright owner]
*
* CDDL HEADER END
*/
/*
* Copyright (c) 2005, 2010, Oracle and/or its affiliates. All rights reserved.
* Copyright (c) 2011, 2016 by Delphix. All rights reserved.
* Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
2008-11-20 20:01:55 +00:00
*/
#include <sys/zfs_context.h>
#include <sys/dmu.h>
#include <sys/dmu_tx.h>
#include <sys/space_map.h>
#include <sys/metaslab_impl.h>
#include <sys/vdev_impl.h>
#include <sys/zio.h>
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
#include <sys/spa_impl.h>
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
#include <sys/zfeature.h>
2008-11-20 20:01:55 +00:00
#define WITH_DF_BLOCK_ALLOCATOR
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
#define GANG_ALLOCATION(flags) \
((flags) & (METASLAB_GANG_CHILD | METASLAB_GANG_HEADER))
/*
* Metaslab granularity, in bytes. This is roughly similar to what would be
* referred to as the "stripe size" in traditional RAID arrays. In normal
* operation, we will try to write this amount of data to a top-level vdev
* before moving on to the next one.
*/
unsigned long metaslab_aliquot = 512 << 10;
2008-11-20 20:01:55 +00:00
uint64_t metaslab_gang_bang = SPA_MAXBLOCKSIZE + 1; /* force gang blocks */
/*
* The in-core space map representation is more compact than its on-disk form.
* The zfs_condense_pct determines how much more compact the in-core
* space map representation must be before we compact it on-disk.
* Values should be greater than or equal to 100.
*/
int zfs_condense_pct = 200;
/*
* Condensing a metaslab is not guaranteed to actually reduce the amount of
* space used on disk. In particular, a space map uses data in increments of
* MAX(1 << ashift, space_map_blksz), so a metaslab might use the
* same number of blocks after condensing. Since the goal of condensing is to
* reduce the number of IOPs required to read the space map, we only want to
* condense when we can be sure we will reduce the number of blocks used by the
* space map. Unfortunately, we cannot precisely compute whether or not this is
* the case in metaslab_should_condense since we are holding ms_lock. Instead,
* we apply the following heuristic: do not condense a spacemap unless the
* uncondensed size consumes greater than zfs_metaslab_condense_block_threshold
* blocks.
*/
int zfs_metaslab_condense_block_threshold = 4;
/*
* The zfs_mg_noalloc_threshold defines which metaslab groups should
* be eligible for allocation. The value is defined as a percentage of
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* free space. Metaslab groups that have more free space than
* zfs_mg_noalloc_threshold are always eligible for allocations. Once
* a metaslab group's free space is less than or equal to the
* zfs_mg_noalloc_threshold the allocator will avoid allocating to that
* group unless all groups in the pool have reached zfs_mg_noalloc_threshold.
* Once all groups in the pool reach zfs_mg_noalloc_threshold then all
* groups are allowed to accept allocations. Gang blocks are always
* eligible to allocate on any metaslab group. The default value of 0 means
* no metaslab group will be excluded based on this criterion.
*/
int zfs_mg_noalloc_threshold = 0;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* Metaslab groups are considered eligible for allocations if their
* fragmenation metric (measured as a percentage) is less than or equal to
* zfs_mg_fragmentation_threshold. If a metaslab group exceeds this threshold
* then it will be skipped unless all metaslab groups within the metaslab
* class have also crossed this threshold.
*/
int zfs_mg_fragmentation_threshold = 85;
/*
* Allow metaslabs to keep their active state as long as their fragmentation
* percentage is less than or equal to zfs_metaslab_fragmentation_threshold. An
* active metaslab that exceeds this threshold will no longer keep its active
* status allowing better metaslabs to be selected.
*/
int zfs_metaslab_fragmentation_threshold = 70;
/*
* When set will load all metaslabs when pool is first opened.
*/
int metaslab_debug_load = 0;
/*
* When set will prevent metaslabs from being unloaded.
*/
int metaslab_debug_unload = 0;
2009-07-02 22:44:48 +00:00
/*
* Minimum size which forces the dynamic allocator to change
* it's allocation strategy. Once the space map cannot satisfy
2009-07-02 22:44:48 +00:00
* an allocation of this size then it switches to using more
* aggressive strategy (i.e search by size rather than offset).
*/
uint64_t metaslab_df_alloc_threshold = SPA_OLD_MAXBLOCKSIZE;
2009-07-02 22:44:48 +00:00
/*
* The minimum free space, in percent, which must be available
* in a space map to continue allocations in a first-fit fashion.
* Once the space map's free space drops below this level we dynamically
2009-07-02 22:44:48 +00:00
* switch to using best-fit allocations.
*/
int metaslab_df_free_pct = 4;
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Percentage of all cpus that can be used by the metaslab taskq.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
int metaslab_load_pct = 50;
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Determines how many txgs a metaslab may remain loaded without having any
* allocations from it. As long as a metaslab continues to be used we will
* keep it loaded.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
int metaslab_unload_delay = TXG_SIZE * 2;
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Max number of metaslabs per group to preload.
*/
int metaslab_preload_limit = SPA_DVAS_PER_BP;
/*
* Enable/disable preloading of metaslab.
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
int metaslab_preload_enabled = B_TRUE;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* Enable/disable fragmentation weighting on metaslabs.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
int metaslab_fragmentation_factor_enabled = B_TRUE;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* Enable/disable lba weighting (i.e. outer tracks are given preference).
*/
int metaslab_lba_weighting_enabled = B_TRUE;
/*
* Enable/disable metaslab group biasing.
*/
int metaslab_bias_enabled = B_TRUE;
/*
* Enable/disable segment-based metaslab selection.
*/
int zfs_metaslab_segment_weight_enabled = B_TRUE;
/*
* When using segment-based metaslab selection, we will continue
* allocating from the active metaslab until we have exhausted
* zfs_metaslab_switch_threshold of its buckets.
*/
int zfs_metaslab_switch_threshold = 2;
/*
* Internal switch to enable/disable the metaslab allocation tracing
* facility.
*/
#ifdef _METASLAB_TRACING
boolean_t metaslab_trace_enabled = B_TRUE;
#endif
/*
* Maximum entries that the metaslab allocation tracing facility will keep
* in a given list when running in non-debug mode. We limit the number
* of entries in non-debug mode to prevent us from using up too much memory.
* The limit should be sufficiently large that we don't expect any allocation
* to every exceed this value. In debug mode, the system will panic if this
* limit is ever reached allowing for further investigation.
*/
#ifdef _METASLAB_TRACING
uint64_t metaslab_trace_max_entries = 5000;
#endif
static uint64_t metaslab_weight(metaslab_t *);
static void metaslab_set_fragmentation(metaslab_t *);
#ifdef _METASLAB_TRACING
kmem_cache_t *metaslab_alloc_trace_cache;
#endif
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
2008-11-20 20:01:55 +00:00
/*
* ==========================================================================
* Metaslab classes
* ==========================================================================
*/
metaslab_class_t *
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_class_create(spa_t *spa, metaslab_ops_t *ops)
2008-11-20 20:01:55 +00:00
{
metaslab_class_t *mc;
mc = kmem_zalloc(sizeof (metaslab_class_t), KM_SLEEP);
2008-11-20 20:01:55 +00:00
mc->mc_spa = spa;
2008-11-20 20:01:55 +00:00
mc->mc_rotor = NULL;
2009-07-02 22:44:48 +00:00
mc->mc_ops = ops;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
mutex_init(&mc->mc_lock, NULL, MUTEX_DEFAULT, NULL);
refcount_create_tracked(&mc->mc_alloc_slots);
2008-11-20 20:01:55 +00:00
return (mc);
}
void
metaslab_class_destroy(metaslab_class_t *mc)
{
ASSERT(mc->mc_rotor == NULL);
ASSERT(mc->mc_alloc == 0);
ASSERT(mc->mc_deferred == 0);
ASSERT(mc->mc_space == 0);
ASSERT(mc->mc_dspace == 0);
2008-11-20 20:01:55 +00:00
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
refcount_destroy(&mc->mc_alloc_slots);
mutex_destroy(&mc->mc_lock);
2008-11-20 20:01:55 +00:00
kmem_free(mc, sizeof (metaslab_class_t));
}
int
metaslab_class_validate(metaslab_class_t *mc)
2008-11-20 20:01:55 +00:00
{
metaslab_group_t *mg;
vdev_t *vd;
2008-11-20 20:01:55 +00:00
/*
* Must hold one of the spa_config locks.
*/
ASSERT(spa_config_held(mc->mc_spa, SCL_ALL, RW_READER) ||
spa_config_held(mc->mc_spa, SCL_ALL, RW_WRITER));
2008-11-20 20:01:55 +00:00
if ((mg = mc->mc_rotor) == NULL)
return (0);
do {
vd = mg->mg_vd;
ASSERT(vd->vdev_mg != NULL);
ASSERT3P(vd->vdev_top, ==, vd);
ASSERT3P(mg->mg_class, ==, mc);
ASSERT3P(vd->vdev_ops, !=, &vdev_hole_ops);
} while ((mg = mg->mg_next) != mc->mc_rotor);
return (0);
2008-11-20 20:01:55 +00:00
}
void
metaslab_class_space_update(metaslab_class_t *mc, int64_t alloc_delta,
int64_t defer_delta, int64_t space_delta, int64_t dspace_delta)
2008-11-20 20:01:55 +00:00
{
atomic_add_64(&mc->mc_alloc, alloc_delta);
atomic_add_64(&mc->mc_deferred, defer_delta);
atomic_add_64(&mc->mc_space, space_delta);
atomic_add_64(&mc->mc_dspace, dspace_delta);
}
2008-11-20 20:01:55 +00:00
uint64_t
metaslab_class_get_alloc(metaslab_class_t *mc)
{
return (mc->mc_alloc);
}
2008-11-20 20:01:55 +00:00
uint64_t
metaslab_class_get_deferred(metaslab_class_t *mc)
{
return (mc->mc_deferred);
}
2008-11-20 20:01:55 +00:00
uint64_t
metaslab_class_get_space(metaslab_class_t *mc)
{
return (mc->mc_space);
}
2008-11-20 20:01:55 +00:00
uint64_t
metaslab_class_get_dspace(metaslab_class_t *mc)
{
return (spa_deflate(mc->mc_spa) ? mc->mc_dspace : mc->mc_space);
2008-11-20 20:01:55 +00:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
void
metaslab_class_histogram_verify(metaslab_class_t *mc)
{
vdev_t *rvd = mc->mc_spa->spa_root_vdev;
uint64_t *mc_hist;
int i, c;
if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
return;
mc_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
KM_SLEEP);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
for (c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
/*
* Skip any holes, uninitialized top-levels, or
* vdevs that are not in this metalab class.
*/
if (tvd->vdev_ishole || tvd->vdev_ms_shift == 0 ||
mg->mg_class != mc) {
continue;
}
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++)
mc_hist[i] += mg->mg_histogram[i];
}
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i++)
VERIFY3U(mc_hist[i], ==, mc->mc_histogram[i]);
kmem_free(mc_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
}
/*
* Calculate the metaslab class's fragmentation metric. The metric
* is weighted based on the space contribution of each metaslab group.
* The return value will be a number between 0 and 100 (inclusive), or
* ZFS_FRAG_INVALID if the metric has not been set. See comment above the
* zfs_frag_table for more information about the metric.
*/
uint64_t
metaslab_class_fragmentation(metaslab_class_t *mc)
{
vdev_t *rvd = mc->mc_spa->spa_root_vdev;
uint64_t fragmentation = 0;
int c;
spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);
for (c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
/*
* Skip any holes, uninitialized top-levels, or
* vdevs that are not in this metalab class.
*/
if (tvd->vdev_ishole || tvd->vdev_ms_shift == 0 ||
mg->mg_class != mc) {
continue;
}
/*
* If a metaslab group does not contain a fragmentation
* metric then just bail out.
*/
if (mg->mg_fragmentation == ZFS_FRAG_INVALID) {
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
return (ZFS_FRAG_INVALID);
}
/*
* Determine how much this metaslab_group is contributing
* to the overall pool fragmentation metric.
*/
fragmentation += mg->mg_fragmentation *
metaslab_group_get_space(mg);
}
fragmentation /= metaslab_class_get_space(mc);
ASSERT3U(fragmentation, <=, 100);
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
return (fragmentation);
}
/*
* Calculate the amount of expandable space that is available in
* this metaslab class. If a device is expanded then its expandable
* space will be the amount of allocatable space that is currently not
* part of this metaslab class.
*/
uint64_t
metaslab_class_expandable_space(metaslab_class_t *mc)
{
vdev_t *rvd = mc->mc_spa->spa_root_vdev;
uint64_t space = 0;
int c;
spa_config_enter(mc->mc_spa, SCL_VDEV, FTAG, RW_READER);
for (c = 0; c < rvd->vdev_children; c++) {
vdev_t *tvd = rvd->vdev_child[c];
metaslab_group_t *mg = tvd->vdev_mg;
if (tvd->vdev_ishole || tvd->vdev_ms_shift == 0 ||
mg->mg_class != mc) {
continue;
}
/*
* Calculate if we have enough space to add additional
* metaslabs. We report the expandable space in terms
* of the metaslab size since that's the unit of expansion.
*/
space += P2ALIGN(tvd->vdev_max_asize - tvd->vdev_asize,
1ULL << tvd->vdev_ms_shift);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
}
spa_config_exit(mc->mc_spa, SCL_VDEV, FTAG);
return (space);
}
2008-11-20 20:01:55 +00:00
static int
metaslab_compare(const void *x1, const void *x2)
{
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
const metaslab_t *m1 = (const metaslab_t *)x1;
const metaslab_t *m2 = (const metaslab_t *)x2;
2008-11-20 20:01:55 +00:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
int cmp = AVL_CMP(m2->ms_weight, m1->ms_weight);
if (likely(cmp))
return (cmp);
2008-11-20 20:01:55 +00:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
IMPLY(AVL_CMP(m1->ms_start, m2->ms_start) == 0, m1 == m2);
2008-11-20 20:01:55 +00:00
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
return (AVL_CMP(m1->ms_start, m2->ms_start));
2008-11-20 20:01:55 +00:00
}
/*
* Verify that the space accounting on disk matches the in-core range_trees.
*/
void
metaslab_verify_space(metaslab_t *msp, uint64_t txg)
{
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
uint64_t allocated = 0;
uint64_t sm_free_space, msp_free_space;
int t;
ASSERT(MUTEX_HELD(&msp->ms_lock));
if ((zfs_flags & ZFS_DEBUG_METASLAB_VERIFY) == 0)
return;
/*
* We can only verify the metaslab space when we're called
* from syncing context with a loaded metaslab that has an allocated
* space map. Calling this in non-syncing context does not
* provide a consistent view of the metaslab since we're performing
* allocations in the future.
*/
if (txg != spa_syncing_txg(spa) || msp->ms_sm == NULL ||
!msp->ms_loaded)
return;
sm_free_space = msp->ms_size - space_map_allocated(msp->ms_sm) -
space_map_alloc_delta(msp->ms_sm);
/*
* Account for future allocations since we would have already
* deducted that space from the ms_freetree.
*/
for (t = 0; t < TXG_CONCURRENT_STATES; t++) {
allocated +=
range_tree_space(msp->ms_alloctree[(txg + t) & TXG_MASK]);
}
msp_free_space = range_tree_space(msp->ms_tree) + allocated +
msp->ms_deferspace + range_tree_space(msp->ms_freedtree);
VERIFY3U(sm_free_space, ==, msp_free_space);
}
/*
* ==========================================================================
* Metaslab groups
* ==========================================================================
*/
/*
* Update the allocatable flag and the metaslab group's capacity.
* The allocatable flag is set to true if the capacity is below
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
* the zfs_mg_noalloc_threshold or has a fragmentation value that is
* greater than zfs_mg_fragmentation_threshold. If a metaslab group
* transitions from allocatable to non-allocatable or vice versa then the
* metaslab group's class is updated to reflect the transition.
*/
static void
metaslab_group_alloc_update(metaslab_group_t *mg)
{
vdev_t *vd = mg->mg_vd;
metaslab_class_t *mc = mg->mg_class;
vdev_stat_t *vs = &vd->vdev_stat;
boolean_t was_allocatable;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
boolean_t was_initialized;
ASSERT(vd == vd->vdev_top);
mutex_enter(&mg->mg_lock);
was_allocatable = mg->mg_allocatable;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
was_initialized = mg->mg_initialized;
mg->mg_free_capacity = ((vs->vs_space - vs->vs_alloc) * 100) /
(vs->vs_space + 1);
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
mutex_enter(&mc->mc_lock);
/*
* If the metaslab group was just added then it won't
* have any space until we finish syncing out this txg.
* At that point we will consider it initialized and available
* for allocations. We also don't consider non-activated
* metaslab groups (e.g. vdevs that are in the middle of being removed)
* to be initialized, because they can't be used for allocation.
*/
mg->mg_initialized = metaslab_group_initialized(mg);
if (!was_initialized && mg->mg_initialized) {
mc->mc_groups++;
} else if (was_initialized && !mg->mg_initialized) {
ASSERT3U(mc->mc_groups, >, 0);
mc->mc_groups--;
}
if (mg->mg_initialized)
mg->mg_no_free_space = B_FALSE;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* A metaslab group is considered allocatable if it has plenty
* of free space or is not heavily fragmented. We only take
* fragmentation into account if the metaslab group has a valid
* fragmentation metric (i.e. a value between 0 and 100).
*/
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
mg->mg_allocatable = (mg->mg_activation_count > 0 &&
mg->mg_free_capacity > zfs_mg_noalloc_threshold &&
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
(mg->mg_fragmentation == ZFS_FRAG_INVALID ||
mg->mg_fragmentation <= zfs_mg_fragmentation_threshold));
/*
* The mc_alloc_groups maintains a count of the number of
* groups in this metaslab class that are still above the
* zfs_mg_noalloc_threshold. This is used by the allocating
* threads to determine if they should avoid allocations to
* a given group. The allocator will avoid allocations to a group
* if that group has reached or is below the zfs_mg_noalloc_threshold
* and there are still other groups that are above the threshold.
* When a group transitions from allocatable to non-allocatable or
* vice versa we update the metaslab class to reflect that change.
* When the mc_alloc_groups value drops to 0 that means that all
* groups have reached the zfs_mg_noalloc_threshold making all groups
* eligible for allocations. This effectively means that all devices
* are balanced again.
*/
if (was_allocatable && !mg->mg_allocatable)
mc->mc_alloc_groups--;
else if (!was_allocatable && mg->mg_allocatable)
mc->mc_alloc_groups++;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
mutex_exit(&mc->mc_lock);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
mutex_exit(&mg->mg_lock);
}
2008-11-20 20:01:55 +00:00
metaslab_group_t *
metaslab_group_create(metaslab_class_t *mc, vdev_t *vd)
{
metaslab_group_t *mg;
mg = kmem_zalloc(sizeof (metaslab_group_t), KM_SLEEP);
2008-11-20 20:01:55 +00:00
mutex_init(&mg->mg_lock, NULL, MUTEX_DEFAULT, NULL);
avl_create(&mg->mg_metaslab_tree, metaslab_compare,
sizeof (metaslab_t), offsetof(struct metaslab, ms_group_node));
mg->mg_vd = vd;
mg->mg_class = mc;
mg->mg_activation_count = 0;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
mg->mg_initialized = B_FALSE;
mg->mg_no_free_space = B_TRUE;
refcount_create_tracked(&mg->mg_alloc_queue_depth);
2008-11-20 20:01:55 +00:00
mg->mg_taskq = taskq_create("metaslab_group_taskq", metaslab_load_pct,
Align thread priority with Linux defaults Under Linux filesystem threads responsible for handling I/O are normally created with the maximum priority. Non-I/O filesystem processes run with the default priority. ZFS should adopt the same priority scheme under Linux to maintain good performance and so that it will complete fairly when other Linux filesystems are active. The priorities have been updated to the following: $ ps -eLo rtprio,cls,pid,pri,nice,cmd | egrep 'z_|spl_|zvol|arc|dbu|meta' - TS 10743 19 -20 [spl_kmem_cache] - TS 10744 19 -20 [spl_system_task] - TS 10745 19 -20 [spl_dynamic_tas] - TS 10764 19 0 [dbu_evict] - TS 10765 19 0 [arc_prune] - TS 10766 19 0 [arc_reclaim] - TS 10767 19 0 [arc_user_evicts] - TS 10768 19 0 [l2arc_feed] - TS 10769 39 0 [z_unmount] - TS 10770 39 -20 [zvol] - TS 11011 39 -20 [z_null_iss] - TS 11012 39 -20 [z_null_int] - TS 11013 39 -20 [z_rd_iss] - TS 11014 39 -20 [z_rd_int_0] - TS 11022 38 -19 [z_wr_iss] - TS 11023 39 -20 [z_wr_iss_h] - TS 11024 39 -20 [z_wr_int_0] - TS 11032 39 -20 [z_wr_int_h] - TS 11033 39 -20 [z_fr_iss_0] - TS 11041 39 -20 [z_fr_int] - TS 11042 39 -20 [z_cl_iss] - TS 11043 39 -20 [z_cl_int] - TS 11044 39 -20 [z_ioctl_iss] - TS 11045 39 -20 [z_ioctl_int] - TS 11046 39 -20 [metaslab_group_] - TS 11050 19 0 [z_iput] - TS 11121 38 -19 [z_wr_iss] Note that under Linux the meaning of a processes priority is inverted with respect to illumos. High values on Linux indicate a _low_ priority while high value on illumos indicate a _high_ priority. In order to preserve the logical meaning of the minclsyspri and maxclsyspri macros when they are used by the illumos wrapper functions their values have been inverted. This way when changes are merged from upstream illumos we won't need to remember to invert the macro. It could also lead to confusion. This patch depends on https://github.com/zfsonlinux/spl/pull/466. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Ned Bass <bass6@llnl.gov> Closes #3607
2015-07-24 17:08:31 +00:00
maxclsyspri, 10, INT_MAX, TASKQ_THREADS_CPU_PCT | TASKQ_DYNAMIC);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
2008-11-20 20:01:55 +00:00
return (mg);
}
void
metaslab_group_destroy(metaslab_group_t *mg)
{
ASSERT(mg->mg_prev == NULL);
ASSERT(mg->mg_next == NULL);
/*
* We may have gone below zero with the activation count
* either because we never activated in the first place or
* because we're done, and possibly removing the vdev.
*/
ASSERT(mg->mg_activation_count <= 0);
taskq_destroy(mg->mg_taskq);
2008-11-20 20:01:55 +00:00
avl_destroy(&mg->mg_metaslab_tree);
mutex_destroy(&mg->mg_lock);
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
refcount_destroy(&mg->mg_alloc_queue_depth);
2008-11-20 20:01:55 +00:00
kmem_free(mg, sizeof (metaslab_group_t));
}
void
metaslab_group_activate(metaslab_group_t *mg)
{
metaslab_class_t *mc = mg->mg_class;
metaslab_group_t *mgprev, *mgnext;
ASSERT(spa_config_held(mc->mc_spa, SCL_ALLOC, RW_WRITER));
ASSERT(mc->mc_rotor != mg);
ASSERT(mg->mg_prev == NULL);
ASSERT(mg->mg_next == NULL);
ASSERT(mg->mg_activation_count <= 0);
if (++mg->mg_activation_count <= 0)
return;
mg->mg_aliquot = metaslab_aliquot * MAX(1, mg->mg_vd->vdev_children);
metaslab_group_alloc_update(mg);
if ((mgprev = mc->mc_rotor) == NULL) {
mg->mg_prev = mg;
mg->mg_next = mg;
} else {
mgnext = mgprev->mg_next;
mg->mg_prev = mgprev;
mg->mg_next = mgnext;
mgprev->mg_next = mg;
mgnext->mg_prev = mg;
}
mc->mc_rotor = mg;
}
void
metaslab_group_passivate(metaslab_group_t *mg)
{
metaslab_class_t *mc = mg->mg_class;
metaslab_group_t *mgprev, *mgnext;
ASSERT(spa_config_held(mc->mc_spa, SCL_ALLOC, RW_WRITER));
if (--mg->mg_activation_count != 0) {
ASSERT(mc->mc_rotor != mg);
ASSERT(mg->mg_prev == NULL);
ASSERT(mg->mg_next == NULL);
ASSERT(mg->mg_activation_count < 0);
return;
}
taskq_wait_outstanding(mg->mg_taskq, 0);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_group_alloc_update(mg);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
mgprev = mg->mg_prev;
mgnext = mg->mg_next;
if (mg == mgnext) {
mc->mc_rotor = NULL;
} else {
mc->mc_rotor = mgnext;
mgprev->mg_next = mgnext;
mgnext->mg_prev = mgprev;
}
mg->mg_prev = NULL;
mg->mg_next = NULL;
}
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
boolean_t
metaslab_group_initialized(metaslab_group_t *mg)
{
vdev_t *vd = mg->mg_vd;
vdev_stat_t *vs = &vd->vdev_stat;
return (vs->vs_space != 0 && mg->mg_activation_count > 0);
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
uint64_t
metaslab_group_get_space(metaslab_group_t *mg)
{
return ((1ULL << mg->mg_vd->vdev_ms_shift) * mg->mg_vd->vdev_ms_count);
}
void
metaslab_group_histogram_verify(metaslab_group_t *mg)
{
uint64_t *mg_hist;
vdev_t *vd = mg->mg_vd;
uint64_t ashift = vd->vdev_ashift;
int i, m;
if ((zfs_flags & ZFS_DEBUG_HISTOGRAM_VERIFY) == 0)
return;
mg_hist = kmem_zalloc(sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE,
KM_SLEEP);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
ASSERT3U(RANGE_TREE_HISTOGRAM_SIZE, >=,
SPACE_MAP_HISTOGRAM_SIZE + ashift);
for (m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
if (msp->ms_sm == NULL)
continue;
for (i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++)
mg_hist[i + ashift] +=
msp->ms_sm->sm_phys->smp_histogram[i];
}
for (i = 0; i < RANGE_TREE_HISTOGRAM_SIZE; i ++)
VERIFY3U(mg_hist[i], ==, mg->mg_histogram[i]);
kmem_free(mg_hist, sizeof (uint64_t) * RANGE_TREE_HISTOGRAM_SIZE);
}
2008-11-20 20:01:55 +00:00
static void
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_group_histogram_add(metaslab_group_t *mg, metaslab_t *msp)
2008-11-20 20:01:55 +00:00
{
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_class_t *mc = mg->mg_class;
uint64_t ashift = mg->mg_vd->vdev_ashift;
int i;
ASSERT(MUTEX_HELD(&msp->ms_lock));
if (msp->ms_sm == NULL)
return;
2008-11-20 20:01:55 +00:00
mutex_enter(&mg->mg_lock);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
for (i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
mg->mg_histogram[i + ashift] +=
msp->ms_sm->sm_phys->smp_histogram[i];
mc->mc_histogram[i + ashift] +=
msp->ms_sm->sm_phys->smp_histogram[i];
}
mutex_exit(&mg->mg_lock);
}
void
metaslab_group_histogram_remove(metaslab_group_t *mg, metaslab_t *msp)
{
metaslab_class_t *mc = mg->mg_class;
uint64_t ashift = mg->mg_vd->vdev_ashift;
int i;
ASSERT(MUTEX_HELD(&msp->ms_lock));
if (msp->ms_sm == NULL)
return;
mutex_enter(&mg->mg_lock);
for (i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
ASSERT3U(mg->mg_histogram[i + ashift], >=,
msp->ms_sm->sm_phys->smp_histogram[i]);
ASSERT3U(mc->mc_histogram[i + ashift], >=,
msp->ms_sm->sm_phys->smp_histogram[i]);
mg->mg_histogram[i + ashift] -=
msp->ms_sm->sm_phys->smp_histogram[i];
mc->mc_histogram[i + ashift] -=
msp->ms_sm->sm_phys->smp_histogram[i];
}
mutex_exit(&mg->mg_lock);
}
static void
metaslab_group_add(metaslab_group_t *mg, metaslab_t *msp)
{
2008-11-20 20:01:55 +00:00
ASSERT(msp->ms_group == NULL);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
mutex_enter(&mg->mg_lock);
2008-11-20 20:01:55 +00:00
msp->ms_group = mg;
msp->ms_weight = 0;
avl_add(&mg->mg_metaslab_tree, msp);
mutex_exit(&mg->mg_lock);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
mutex_enter(&msp->ms_lock);
metaslab_group_histogram_add(mg, msp);
mutex_exit(&msp->ms_lock);
2008-11-20 20:01:55 +00:00
}
static void
metaslab_group_remove(metaslab_group_t *mg, metaslab_t *msp)
{
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
mutex_enter(&msp->ms_lock);
metaslab_group_histogram_remove(mg, msp);
mutex_exit(&msp->ms_lock);
2008-11-20 20:01:55 +00:00
mutex_enter(&mg->mg_lock);
ASSERT(msp->ms_group == mg);
avl_remove(&mg->mg_metaslab_tree, msp);
msp->ms_group = NULL;
mutex_exit(&mg->mg_lock);
}
static void
metaslab_group_sort(metaslab_group_t *mg, metaslab_t *msp, uint64_t weight)
{
/*
* Although in principle the weight can be any value, in
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* practice we do not use values in the range [1, 511].
2008-11-20 20:01:55 +00:00
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
ASSERT(weight >= SPA_MINBLOCKSIZE || weight == 0);
2008-11-20 20:01:55 +00:00
ASSERT(MUTEX_HELD(&msp->ms_lock));
mutex_enter(&mg->mg_lock);
ASSERT(msp->ms_group == mg);
avl_remove(&mg->mg_metaslab_tree, msp);
msp->ms_weight = weight;
avl_add(&mg->mg_metaslab_tree, msp);
mutex_exit(&mg->mg_lock);
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* Calculate the fragmentation for a given metaslab group. We can use
* a simple average here since all metaslabs within the group must have
* the same size. The return value will be a value between 0 and 100
* (inclusive), or ZFS_FRAG_INVALID if less than half of the metaslab in this
* group have a fragmentation metric.
*/
uint64_t
metaslab_group_fragmentation(metaslab_group_t *mg)
{
vdev_t *vd = mg->mg_vd;
uint64_t fragmentation = 0;
uint64_t valid_ms = 0;
int m;
for (m = 0; m < vd->vdev_ms_count; m++) {
metaslab_t *msp = vd->vdev_ms[m];
if (msp->ms_fragmentation == ZFS_FRAG_INVALID)
continue;
valid_ms++;
fragmentation += msp->ms_fragmentation;
}
if (valid_ms <= vd->vdev_ms_count / 2)
return (ZFS_FRAG_INVALID);
fragmentation /= valid_ms;
ASSERT3U(fragmentation, <=, 100);
return (fragmentation);
}
/*
* Determine if a given metaslab group should skip allocations. A metaslab
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* group should avoid allocations if its free capacity is less than the
* zfs_mg_noalloc_threshold or its fragmentation metric is greater than
* zfs_mg_fragmentation_threshold and there is at least one metaslab group
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
* that can still handle allocations. If the allocation throttle is enabled
* then we skip allocations to devices that have reached their maximum
* allocation queue depth unless the selected metaslab group is the only
* eligible group remaining.
*/
static boolean_t
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
metaslab_group_allocatable(metaslab_group_t *mg, metaslab_group_t *rotor,
uint64_t psize)
{
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
spa_t *spa = mg->mg_vd->vdev_spa;
metaslab_class_t *mc = mg->mg_class;
/*
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
* We can only consider skipping this metaslab group if it's
* in the normal metaslab class and there are other metaslab
* groups to select from. Otherwise, we always consider it eligible
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* for allocations.
*/
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
if (mc != spa_normal_class(spa) || mc->mc_groups <= 1)
return (B_TRUE);
/*
* If the metaslab group's mg_allocatable flag is set (see comments
* in metaslab_group_alloc_update() for more information) and
* the allocation throttle is disabled then allow allocations to this
* device. However, if the allocation throttle is enabled then
* check if we have reached our allocation limit (mg_alloc_queue_depth)
* to determine if we should allow allocations to this metaslab group.
* If all metaslab groups are no longer considered allocatable
* (mc_alloc_groups == 0) or we're trying to allocate the smallest
* gang block size then we allow allocations on this metaslab group
* regardless of the mg_allocatable or throttle settings.
*/
if (mg->mg_allocatable) {
metaslab_group_t *mgp;
int64_t qdepth;
uint64_t qmax = mg->mg_max_alloc_queue_depth;
if (!mc->mc_alloc_throttle_enabled)
return (B_TRUE);
/*
* If this metaslab group does not have any free space, then
* there is no point in looking further.
*/
if (mg->mg_no_free_space)
return (B_FALSE);
qdepth = refcount_count(&mg->mg_alloc_queue_depth);
/*
* If this metaslab group is below its qmax or it's
* the only allocatable metasable group, then attempt
* to allocate from it.
*/
if (qdepth < qmax || mc->mc_alloc_groups == 1)
return (B_TRUE);
ASSERT3U(mc->mc_alloc_groups, >, 1);
/*
* Since this metaslab group is at or over its qmax, we
* need to determine if there are metaslab groups after this
* one that might be able to handle this allocation. This is
* racy since we can't hold the locks for all metaslab
* groups at the same time when we make this check.
*/
for (mgp = mg->mg_next; mgp != rotor; mgp = mgp->mg_next) {
qmax = mgp->mg_max_alloc_queue_depth;
qdepth = refcount_count(&mgp->mg_alloc_queue_depth);
/*
* If there is another metaslab group that
* might be able to handle the allocation, then
* we return false so that we skip this group.
*/
if (qdepth < qmax && !mgp->mg_no_free_space)
return (B_FALSE);
}
/*
* We didn't find another group to handle the allocation
* so we can't skip this metaslab group even though
* we are at or over our qmax.
*/
return (B_TRUE);
} else if (mc->mc_alloc_groups == 0 || psize == SPA_MINBLOCKSIZE) {
return (B_TRUE);
}
return (B_FALSE);
}
/*
* ==========================================================================
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Range tree callbacks
* ==========================================================================
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Comparison function for the private size-ordered tree. Tree is sorted
* by size, larger sizes at the end of the tree.
*/
static int
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_rangesize_compare(const void *x1, const void *x2)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
const range_seg_t *r1 = x1;
const range_seg_t *r2 = x2;
uint64_t rs_size1 = r1->rs_end - r1->rs_start;
uint64_t rs_size2 = r2->rs_end - r2->rs_start;
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
int cmp = AVL_CMP(rs_size1, rs_size2);
if (likely(cmp))
return (cmp);
Performance optimization of AVL tree comparator functions perf: 2.75x faster ddt_entry_compare() First 256bits of ddt_key_t is a block checksum, which are expected to be close to random data. Hence, on average, comparison only needs to look at first few bytes of the keys. To reduce number of conditional jump instructions, the result is computed as: sign(memcmp(k1, k2)). Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} , which is computed efficiently. Synthetic performance evaluation of original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R) CPU E5-2660 v3: old 6.85789 s new 2.49089 s perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare() Compute the result directly instead of using conditionals perf: zfs_range_compare() Speedup between 1.1x - 2.5x, depending on compiler version and optimization level. perf: spa_error_entry_compare() `bcmp()` is not suitable for comparator use. Use `memcmp()` instead. perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare() perf: 2.8x faster zil_bp_compare() perf: 2.8x faster mze_compare() perf: faster dbuf_compare() perf: faster compares in spa_misc perf: 2.8x faster layout_hash_compare() perf: 2.8x faster space_reftree_compare() perf: libzfs: faster avl tree comparators perf: guid_compare() perf: dsl_deadlist_compare() perf: perm_set_compare() perf: 2x faster range_tree_seg_compare() perf: faster unique_compare() perf: faster vdev_cache _compare() perf: faster vdev_uberblock_compare() perf: faster fuid _compare() perf: faster zfs_znode_hold_compare() Signed-off-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Richard Elling <richard.elling@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #5033
2016-08-27 18:12:53 +00:00
return (AVL_CMP(r1->rs_start, r2->rs_start));
}
2008-11-20 20:01:55 +00:00
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Create any block allocator specific components. The current allocators
* rely on using both a size-ordered range_tree_t and an array of uint64_t's.
2008-11-20 20:01:55 +00:00
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static void
metaslab_rt_create(range_tree_t *rt, void *arg)
2008-11-20 20:01:55 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = arg;
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3P(rt->rt_arg, ==, msp);
ASSERT(msp->ms_tree == NULL);
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
avl_create(&msp->ms_size_tree, metaslab_rangesize_compare,
sizeof (range_seg_t), offsetof(range_seg_t, rs_pp_node));
2009-07-02 22:44:48 +00:00
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Destroy the block allocator specific components.
*/
2009-07-02 22:44:48 +00:00
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_rt_destroy(range_tree_t *rt, void *arg)
2009-07-02 22:44:48 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = arg;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3P(rt->rt_arg, ==, msp);
ASSERT3P(msp->ms_tree, ==, rt);
ASSERT0(avl_numnodes(&msp->ms_size_tree));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
avl_destroy(&msp->ms_size_tree);
2009-07-02 22:44:48 +00:00
}
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_rt_add(range_tree_t *rt, range_seg_t *rs, void *arg)
2009-07-02 22:44:48 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = arg;
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3P(rt->rt_arg, ==, msp);
ASSERT3P(msp->ms_tree, ==, rt);
VERIFY(!msp->ms_condensing);
avl_add(&msp->ms_size_tree, rs);
2008-11-20 20:01:55 +00:00
}
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_rt_remove(range_tree_t *rt, range_seg_t *rs, void *arg)
2008-11-20 20:01:55 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = arg;
ASSERT3P(rt->rt_arg, ==, msp);
ASSERT3P(msp->ms_tree, ==, rt);
VERIFY(!msp->ms_condensing);
avl_remove(&msp->ms_size_tree, rs);
2008-11-20 20:01:55 +00:00
}
static void
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_rt_vacate(range_tree_t *rt, void *arg)
2008-11-20 20:01:55 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = arg;
ASSERT3P(rt->rt_arg, ==, msp);
ASSERT3P(msp->ms_tree, ==, rt);
/*
* Normally one would walk the tree freeing nodes along the way.
* Since the nodes are shared with the range trees we can avoid
* walking all nodes and just reinitialize the avl tree. The nodes
* will be freed by the range tree, so we don't want to free them here.
*/
avl_create(&msp->ms_size_tree, metaslab_rangesize_compare,
sizeof (range_seg_t), offsetof(range_seg_t, rs_pp_node));
2008-11-20 20:01:55 +00:00
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static range_tree_ops_t metaslab_rt_ops = {
metaslab_rt_create,
metaslab_rt_destroy,
metaslab_rt_add,
metaslab_rt_remove,
metaslab_rt_vacate
};
/*
* ==========================================================================
* Common allocator routines
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* ==========================================================================
*/
2009-07-02 22:44:48 +00:00
/*
* Return the maximum contiguous segment within the metaslab.
2009-07-02 22:44:48 +00:00
*/
uint64_t
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_block_maxsize(metaslab_t *msp)
2009-07-02 22:44:48 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
avl_tree_t *t = &msp->ms_size_tree;
range_seg_t *rs;
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (t == NULL || (rs = avl_last(t)) == NULL)
2009-07-02 22:44:48 +00:00
return (0ULL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
return (rs->rs_end - rs->rs_start);
}
static range_seg_t *
metaslab_block_find(avl_tree_t *t, uint64_t start, uint64_t size)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
{
range_seg_t *rs, rsearch;
avl_index_t where;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rsearch.rs_start = start;
rsearch.rs_end = start + size;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rs = avl_find(t, &rsearch, &where);
if (rs == NULL) {
rs = avl_nearest(t, where, AVL_AFTER);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
return (rs);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
#if defined(WITH_FF_BLOCK_ALLOCATOR) || \
defined(WITH_DF_BLOCK_ALLOCATOR) || \
defined(WITH_CF_BLOCK_ALLOCATOR)
/*
* This is a helper function that can be used by the allocator to find
* a suitable block to allocate. This will search the specified AVL
* tree looking for a block that matches the specified criteria.
*/
static uint64_t
metaslab_block_picker(avl_tree_t *t, uint64_t *cursor, uint64_t size,
uint64_t align)
{
range_seg_t *rs = metaslab_block_find(t, *cursor, size);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
while (rs != NULL) {
uint64_t offset = P2ROUNDUP(rs->rs_start, align);
if (offset + size <= rs->rs_end) {
*cursor = offset + size;
return (offset);
}
rs = AVL_NEXT(t, rs);
}
/*
* If we know we've searched the whole map (*cursor == 0), give up.
* Otherwise, reset the cursor to the beginning and try again.
*/
if (*cursor == 0)
return (-1ULL);
*cursor = 0;
return (metaslab_block_picker(t, cursor, size, align));
2009-07-02 22:44:48 +00:00
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
#endif /* WITH_FF/DF/CF_BLOCK_ALLOCATOR */
2009-07-02 22:44:48 +00:00
#if defined(WITH_FF_BLOCK_ALLOCATOR)
/*
* ==========================================================================
* The first-fit block allocator
* ==========================================================================
*/
static uint64_t
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ff_alloc(metaslab_t *msp, uint64_t size)
2009-07-02 22:44:48 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Find the largest power of 2 block size that evenly divides the
* requested size. This is used to try to allocate blocks with similar
* alignment from the same area of the metaslab (i.e. same cursor
* bucket) but it does not guarantee that other allocations sizes
* may exist in the same region.
*/
uint64_t align = size & -size;
uint64_t *cursor = &msp->ms_lbas[highbit64(align) - 1];
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
avl_tree_t *t = &msp->ms_tree->rt_root;
2009-07-02 22:44:48 +00:00
return (metaslab_block_picker(t, cursor, size, align));
2009-07-02 22:44:48 +00:00
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static metaslab_ops_t metaslab_ff_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_ff_alloc
};
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ops_t *zfs_metaslab_ops = &metaslab_ff_ops;
#endif /* WITH_FF_BLOCK_ALLOCATOR */
#if defined(WITH_DF_BLOCK_ALLOCATOR)
/*
* ==========================================================================
* Dynamic block allocator -
* Uses the first fit allocation scheme until space get low and then
* adjusts to a best fit allocation method. Uses metaslab_df_alloc_threshold
* and metaslab_df_free_pct to determine when to switch the allocation scheme.
* ==========================================================================
*/
2009-07-02 22:44:48 +00:00
static uint64_t
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_df_alloc(metaslab_t *msp, uint64_t size)
2009-07-02 22:44:48 +00:00
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Find the largest power of 2 block size that evenly divides the
* requested size. This is used to try to allocate blocks with similar
* alignment from the same area of the metaslab (i.e. same cursor
* bucket) but it does not guarantee that other allocations sizes
* may exist in the same region.
*/
2009-07-02 22:44:48 +00:00
uint64_t align = size & -size;
uint64_t *cursor = &msp->ms_lbas[highbit64(align) - 1];
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t *rt = msp->ms_tree;
avl_tree_t *t = &rt->rt_root;
uint64_t max_size = metaslab_block_maxsize(msp);
int free_pct = range_tree_space(rt) * 100 / msp->ms_size;
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT3U(avl_numnodes(t), ==, avl_numnodes(&msp->ms_size_tree));
2009-07-02 22:44:48 +00:00
if (max_size < size)
return (-1ULL);
/*
* If we're running low on space switch to using the size
* sorted AVL tree (best-fit).
*/
if (max_size < metaslab_df_alloc_threshold ||
free_pct < metaslab_df_free_pct) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
t = &msp->ms_size_tree;
2009-07-02 22:44:48 +00:00
*cursor = 0;
}
return (metaslab_block_picker(t, cursor, size, 1ULL));
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static metaslab_ops_t metaslab_df_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_df_alloc
2008-11-20 20:01:55 +00:00
};
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ops_t *zfs_metaslab_ops = &metaslab_df_ops;
#endif /* WITH_DF_BLOCK_ALLOCATOR */
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
#if defined(WITH_CF_BLOCK_ALLOCATOR)
/*
* ==========================================================================
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Cursor fit block allocator -
* Select the largest region in the metaslab, set the cursor to the beginning
* of the range and the cursor_end to the end of the range. As allocations
* are made advance the cursor. Continue allocating from the cursor until
* the range is exhausted and then find a new range.
* ==========================================================================
*/
static uint64_t
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_cf_alloc(metaslab_t *msp, uint64_t size)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t *rt = msp->ms_tree;
avl_tree_t *t = &msp->ms_size_tree;
uint64_t *cursor = &msp->ms_lbas[0];
uint64_t *cursor_end = &msp->ms_lbas[1];
uint64_t offset = 0;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT3U(avl_numnodes(t), ==, avl_numnodes(&rt->rt_root));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3U(*cursor_end, >=, *cursor);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if ((*cursor + size) > *cursor_end) {
range_seg_t *rs;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rs = avl_last(&msp->ms_size_tree);
if (rs == NULL || (rs->rs_end - rs->rs_start) < size)
return (-1ULL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*cursor = rs->rs_start;
*cursor_end = rs->rs_end;
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
offset = *cursor;
*cursor += size;
return (offset);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static metaslab_ops_t metaslab_cf_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_cf_alloc
};
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ops_t *zfs_metaslab_ops = &metaslab_cf_ops;
#endif /* WITH_CF_BLOCK_ALLOCATOR */
#if defined(WITH_NDF_BLOCK_ALLOCATOR)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* ==========================================================================
* New dynamic fit allocator -
* Select a region that is large enough to allocate 2^metaslab_ndf_clump_shift
* contiguous blocks. If no region is found then just use the largest segment
* that remains.
* ==========================================================================
*/
/*
* Determines desired number of contiguous blocks (2^metaslab_ndf_clump_shift)
* to request from the allocator.
*/
uint64_t metaslab_ndf_clump_shift = 4;
static uint64_t
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ndf_alloc(metaslab_t *msp, uint64_t size)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
avl_tree_t *t = &msp->ms_tree->rt_root;
avl_index_t where;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_seg_t *rs, rsearch;
uint64_t hbit = highbit64(size);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
uint64_t *cursor = &msp->ms_lbas[hbit - 1];
uint64_t max_size = metaslab_block_maxsize(msp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT3U(avl_numnodes(t), ==, avl_numnodes(&msp->ms_size_tree));
if (max_size < size)
return (-1ULL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rsearch.rs_start = *cursor;
rsearch.rs_end = *cursor + size;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rs = avl_find(t, &rsearch, &where);
if (rs == NULL || (rs->rs_end - rs->rs_start) < size) {
t = &msp->ms_size_tree;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rsearch.rs_start = 0;
rsearch.rs_end = MIN(max_size,
1ULL << (hbit + metaslab_ndf_clump_shift));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rs = avl_find(t, &rsearch, &where);
if (rs == NULL)
rs = avl_nearest(t, where, AVL_AFTER);
ASSERT(rs != NULL);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if ((rs->rs_end - rs->rs_start) >= size) {
*cursor = rs->rs_start + size;
return (rs->rs_start);
}
return (-1ULL);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static metaslab_ops_t metaslab_ndf_ops = {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_ndf_alloc
};
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_ops_t *zfs_metaslab_ops = &metaslab_ndf_ops;
#endif /* WITH_NDF_BLOCK_ALLOCATOR */
2009-07-02 22:44:48 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
2008-11-20 20:01:55 +00:00
/*
* ==========================================================================
* Metaslabs
* ==========================================================================
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Wait for any in-progress metaslab loads to complete.
*/
void
metaslab_load_wait(metaslab_t *msp)
{
ASSERT(MUTEX_HELD(&msp->ms_lock));
while (msp->ms_loading) {
ASSERT(!msp->ms_loaded);
cv_wait(&msp->ms_load_cv, &msp->ms_lock);
}
}
int
metaslab_load(metaslab_t *msp)
{
int error = 0;
int t;
boolean_t success = B_FALSE;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT(!msp->ms_loaded);
ASSERT(!msp->ms_loading);
msp->ms_loading = B_TRUE;
/*
* If the space map has not been allocated yet, then treat
* all the space in the metaslab as free and add it to the
* ms_tree.
*/
if (msp->ms_sm != NULL)
error = space_map_load(msp->ms_sm, msp->ms_tree, SM_FREE);
else
range_tree_add(msp->ms_tree, msp->ms_start, msp->ms_size);
success = (error == 0);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
msp->ms_loading = B_FALSE;
if (success) {
ASSERT3P(msp->ms_group, !=, NULL);
msp->ms_loaded = B_TRUE;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
for (t = 0; t < TXG_DEFER_SIZE; t++) {
range_tree_walk(msp->ms_defertree[t],
range_tree_remove, msp->ms_tree);
}
msp->ms_max_size = metaslab_block_maxsize(msp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
cv_broadcast(&msp->ms_load_cv);
return (error);
}
void
metaslab_unload(metaslab_t *msp)
{
ASSERT(MUTEX_HELD(&msp->ms_lock));
range_tree_vacate(msp->ms_tree, NULL, NULL);
msp->ms_loaded = B_FALSE;
msp->ms_weight &= ~METASLAB_ACTIVE_MASK;
msp->ms_max_size = 0;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
int
metaslab_init(metaslab_group_t *mg, uint64_t id, uint64_t object, uint64_t txg,
metaslab_t **msp)
2008-11-20 20:01:55 +00:00
{
vdev_t *vd = mg->mg_vd;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
objset_t *mos = vd->vdev_spa->spa_meta_objset;
metaslab_t *ms;
int error;
2008-11-20 20:01:55 +00:00
ms = kmem_zalloc(sizeof (metaslab_t), KM_SLEEP);
mutex_init(&ms->ms_lock, NULL, MUTEX_DEFAULT, NULL);
cv_init(&ms->ms_load_cv, NULL, CV_DEFAULT, NULL);
ms->ms_id = id;
ms->ms_start = id << vd->vdev_ms_shift;
ms->ms_size = 1ULL << vd->vdev_ms_shift;
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* We only open space map objects that already exist. All others
* will be opened when we finally allocate an object for it.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
if (object != 0) {
error = space_map_open(&ms->ms_sm, mos, object, ms->ms_start,
ms->ms_size, vd->vdev_ashift, &ms->ms_lock);
if (error != 0) {
kmem_free(ms, sizeof (metaslab_t));
return (error);
}
ASSERT(ms->ms_sm != NULL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
2008-11-20 20:01:55 +00:00
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* We create the main range tree here, but we don't create the
* other range trees until metaslab_sync_done(). This serves
2008-11-20 20:01:55 +00:00
* two purposes: it allows metaslab_sync_done() to detect the
* addition of new space; and for debugging, it ensures that we'd
* data fault on any attempt to use this metaslab before it's ready.
*/
ms->ms_tree = range_tree_create(&metaslab_rt_ops, ms, &ms->ms_lock);
metaslab_group_add(mg, ms);
2008-11-20 20:01:55 +00:00
metaslab_set_fragmentation(ms);
2008-11-20 20:01:55 +00:00
/*
* If we're opening an existing pool (txg == 0) or creating
* a new one (txg == TXG_INITIAL), all space is available now.
* If we're adding space to an existing pool, the new space
* does not become available until after this txg has synced.
* The metaslab's weight will also be initialized when we sync
* out this txg. This ensures that we don't attempt to allocate
* from it before we have initialized it completely.
2008-11-20 20:01:55 +00:00
*/
if (txg <= TXG_INITIAL)
metaslab_sync_done(ms, 0);
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* If metaslab_debug_load is set and we're initializing a metaslab
* that has an allocated space map object then load the its space
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* map so that can verify frees.
*/
if (metaslab_debug_load && ms->ms_sm != NULL) {
mutex_enter(&ms->ms_lock);
VERIFY0(metaslab_load(ms));
mutex_exit(&ms->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
2008-11-20 20:01:55 +00:00
if (txg != 0) {
vdev_dirty(vd, 0, NULL, txg);
vdev_dirty(vd, VDD_METASLAB, ms, txg);
2008-11-20 20:01:55 +00:00
}
*msp = ms;
return (0);
2008-11-20 20:01:55 +00:00
}
void
metaslab_fini(metaslab_t *msp)
{
int t;
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_group_t *mg = msp->ms_group;
2008-11-20 20:01:55 +00:00
metaslab_group_remove(mg, msp);
mutex_enter(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
VERIFY(msp->ms_group == NULL);
vdev_space_update(mg->mg_vd, -space_map_allocated(msp->ms_sm),
0, -msp->ms_size);
space_map_close(msp->ms_sm);
metaslab_unload(msp);
range_tree_destroy(msp->ms_tree);
range_tree_destroy(msp->ms_freeingtree);
range_tree_destroy(msp->ms_freedtree);
2008-11-20 20:01:55 +00:00
for (t = 0; t < TXG_SIZE; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_destroy(msp->ms_alloctree[t]);
2008-11-20 20:01:55 +00:00
}
for (t = 0; t < TXG_DEFER_SIZE; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_destroy(msp->ms_defertree[t]);
}
ASSERT0(msp->ms_deferspace);
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
cv_destroy(&msp->ms_load_cv);
2008-11-20 20:01:55 +00:00
mutex_destroy(&msp->ms_lock);
kmem_free(msp, sizeof (metaslab_t));
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
#define FRAGMENTATION_TABLE_SIZE 17
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* This table defines a segment size based fragmentation metric that will
* allow each metaslab to derive its own fragmentation value. This is done
* by calculating the space in each bucket of the spacemap histogram and
* multiplying that by the fragmetation metric in this table. Doing
* this for all buckets and dividing it by the total amount of free
* space in this metaslab (i.e. the total free space in all buckets) gives
* us the fragmentation metric. This means that a high fragmentation metric
* equates to most of the free space being comprised of small segments.
* Conversely, if the metric is low, then most of the free space is in
* large segments. A 10% change in fragmentation equates to approximately
* double the number of segments.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* This table defines 0% fragmented space using 16MB segments. Testing has
* shown that segments that are greater than or equal to 16MB do not suffer
* from drastic performance problems. Using this value, we derive the rest
* of the table. Since the fragmentation value is never stored on disk, it
* is possible to change these calculations in the future.
*/
int zfs_frag_table[FRAGMENTATION_TABLE_SIZE] = {
100, /* 512B */
100, /* 1K */
98, /* 2K */
95, /* 4K */
90, /* 8K */
80, /* 16K */
70, /* 32K */
60, /* 64K */
50, /* 128K */
40, /* 256K */
30, /* 512K */
20, /* 1M */
15, /* 2M */
10, /* 4M */
5, /* 8M */
0 /* 16M */
};
/*
* Calclate the metaslab's fragmentation metric. A return value
* of ZFS_FRAG_INVALID means that the metaslab has not been upgraded and does
* not support this metric. Otherwise, the return value should be in the
* range [0, 100].
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
static void
metaslab_set_fragmentation(metaslab_t *msp)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
{
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
uint64_t fragmentation = 0;
uint64_t total = 0;
boolean_t feature_enabled = spa_feature_is_enabled(spa,
SPA_FEATURE_SPACEMAP_HISTOGRAM);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
int i;
if (!feature_enabled) {
msp->ms_fragmentation = ZFS_FRAG_INVALID;
return;
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* A null space map means that the entire metaslab is free
* and thus is not fragmented.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
if (msp->ms_sm == NULL) {
msp->ms_fragmentation = 0;
return;
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* If this metaslab's space map has not been upgraded, flag it
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* so that we upgrade next time we encounter it.
*/
if (msp->ms_sm->sm_dbuf->db_size != sizeof (space_map_phys_t)) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
vdev_t *vd = msp->ms_group->mg_vd;
if (spa_writeable(vd->vdev_spa)) {
uint64_t txg = spa_syncing_txg(spa);
msp->ms_condense_wanted = B_TRUE;
vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
spa_dbgmsg(spa, "txg %llu, requesting force condense: "
"msp %p, vd %p", txg, msp, vd);
}
msp->ms_fragmentation = ZFS_FRAG_INVALID;
return;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
for (i = 0; i < SPACE_MAP_HISTOGRAM_SIZE; i++) {
uint64_t space = 0;
uint8_t shift = msp->ms_sm->sm_shift;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
int idx = MIN(shift - SPA_MINBLOCKSHIFT + i,
FRAGMENTATION_TABLE_SIZE - 1);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_sm->sm_phys->smp_histogram[i] == 0)
continue;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
space = msp->ms_sm->sm_phys->smp_histogram[i] << (i + shift);
total += space;
ASSERT3U(idx, <, FRAGMENTATION_TABLE_SIZE);
fragmentation += space * zfs_frag_table[idx];
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
if (total > 0)
fragmentation /= total;
ASSERT3U(fragmentation, <=, 100);
msp->ms_fragmentation = fragmentation;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
2008-11-20 20:01:55 +00:00
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* Compute a weight -- a selection preference value -- for the given metaslab.
* This is based on the amount of free space, the level of fragmentation,
* the LBA range, and whether the metaslab is loaded.
*/
2008-11-20 20:01:55 +00:00
static uint64_t
metaslab_space_weight(metaslab_t *msp)
2008-11-20 20:01:55 +00:00
{
metaslab_group_t *mg = msp->ms_group;
vdev_t *vd = mg->mg_vd;
uint64_t weight, space;
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT(!vd->vdev_removing);
2008-11-20 20:01:55 +00:00
/*
* The baseline weight is the metaslab's free space.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space = msp->ms_size - space_map_allocated(msp->ms_sm);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
if (metaslab_fragmentation_factor_enabled &&
msp->ms_fragmentation != ZFS_FRAG_INVALID) {
/*
* Use the fragmentation information to inversely scale
* down the baseline weight. We need to ensure that we
* don't exclude this metaslab completely when it's 100%
* fragmented. To avoid this we reduce the fragmented value
* by 1.
*/
space = (space * (100 - (msp->ms_fragmentation - 1))) / 100;
/*
* If space < SPA_MINBLOCKSIZE, then we will not allocate from
* this metaslab again. The fragmentation metric may have
* decreased the space to something smaller than
* SPA_MINBLOCKSIZE, so reset the space to SPA_MINBLOCKSIZE
* so that we can consume any remaining space.
*/
if (space > 0 && space < SPA_MINBLOCKSIZE)
space = SPA_MINBLOCKSIZE;
}
2008-11-20 20:01:55 +00:00
weight = space;
/*
* Modern disks have uniform bit density and constant angular velocity.
* Therefore, the outer recording zones are faster (higher bandwidth)
* than the inner zones by the ratio of outer to inner track diameter,
* which is typically around 2:1. We account for this by assigning
* higher weight to lower metaslabs (multiplier ranging from 2x to 1x).
* In effect, this means that we'll select the metaslab with the most
* free bandwidth rather than simply the one with the most free space.
*/
if (!vd->vdev_nonrot && metaslab_lba_weighting_enabled) {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
weight = 2 * weight - (msp->ms_id * weight) / vd->vdev_ms_count;
ASSERT(weight >= space && weight <= 2 * space);
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* If this metaslab is one we're actively using, adjust its
* weight to make it preferable to any inactive metaslab so
* we'll polish it off. If the fragmentation on this metaslab
* has exceed our threshold, then don't mark it active.
*/
if (msp->ms_loaded && msp->ms_fragmentation != ZFS_FRAG_INVALID &&
msp->ms_fragmentation <= zfs_metaslab_fragmentation_threshold) {
weight |= (msp->ms_weight & METASLAB_ACTIVE_MASK);
}
2008-11-20 20:01:55 +00:00
WEIGHT_SET_SPACEBASED(weight);
return (weight);
}
/*
* Return the weight of the specified metaslab, according to the segment-based
* weighting algorithm. The metaslab must be loaded. This function can
* be called within a sync pass since it relies only on the metaslab's
* range tree which is always accurate when the metaslab is loaded.
*/
static uint64_t
metaslab_weight_from_range_tree(metaslab_t *msp)
{
uint64_t weight = 0;
uint32_t segments = 0;
int i;
ASSERT(msp->ms_loaded);
for (i = RANGE_TREE_HISTOGRAM_SIZE - 1; i >= SPA_MINBLOCKSHIFT; i--) {
uint8_t shift = msp->ms_group->mg_vd->vdev_ashift;
int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;
segments <<= 1;
segments += msp->ms_tree->rt_histogram[i];
/*
* The range tree provides more precision than the space map
* and must be downgraded so that all values fit within the
* space map's histogram. This allows us to compare loaded
* vs. unloaded metaslabs to determine which metaslab is
* considered "best".
*/
if (i > max_idx)
continue;
if (segments != 0) {
WEIGHT_SET_COUNT(weight, segments);
WEIGHT_SET_INDEX(weight, i);
WEIGHT_SET_ACTIVE(weight, 0);
break;
}
}
return (weight);
}
/*
* Calculate the weight based on the on-disk histogram. This should only
* be called after a sync pass has completely finished since the on-disk
* information is updated in metaslab_sync().
*/
static uint64_t
metaslab_weight_from_spacemap(metaslab_t *msp)
{
uint64_t weight = 0;
int i;
for (i = SPACE_MAP_HISTOGRAM_SIZE - 1; i >= 0; i--) {
if (msp->ms_sm->sm_phys->smp_histogram[i] != 0) {
WEIGHT_SET_COUNT(weight,
msp->ms_sm->sm_phys->smp_histogram[i]);
WEIGHT_SET_INDEX(weight, i +
msp->ms_sm->sm_shift);
WEIGHT_SET_ACTIVE(weight, 0);
break;
}
}
return (weight);
}
/*
* Compute a segment-based weight for the specified metaslab. The weight
* is determined by highest bucket in the histogram. The information
* for the highest bucket is encoded into the weight value.
*/
static uint64_t
metaslab_segment_weight(metaslab_t *msp)
{
metaslab_group_t *mg = msp->ms_group;
uint64_t weight = 0;
uint8_t shift = mg->mg_vd->vdev_ashift;
ASSERT(MUTEX_HELD(&msp->ms_lock));
/*
* The metaslab is completely free.
*/
if (space_map_allocated(msp->ms_sm) == 0) {
int idx = highbit64(msp->ms_size) - 1;
int max_idx = SPACE_MAP_HISTOGRAM_SIZE + shift - 1;
if (idx < max_idx) {
WEIGHT_SET_COUNT(weight, 1ULL);
WEIGHT_SET_INDEX(weight, idx);
} else {
WEIGHT_SET_COUNT(weight, 1ULL << (idx - max_idx));
WEIGHT_SET_INDEX(weight, max_idx);
}
WEIGHT_SET_ACTIVE(weight, 0);
ASSERT(!WEIGHT_IS_SPACEBASED(weight));
return (weight);
}
ASSERT3U(msp->ms_sm->sm_dbuf->db_size, ==, sizeof (space_map_phys_t));
/*
* If the metaslab is fully allocated then just make the weight 0.
*/
if (space_map_allocated(msp->ms_sm) == msp->ms_size)
return (0);
/*
* If the metaslab is already loaded, then use the range tree to
* determine the weight. Otherwise, we rely on the space map information
* to generate the weight.
*/
if (msp->ms_loaded) {
weight = metaslab_weight_from_range_tree(msp);
} else {
weight = metaslab_weight_from_spacemap(msp);
}
/*
* If the metaslab was active the last time we calculated its weight
* then keep it active. We want to consume the entire region that
* is associated with this weight.
*/
if (msp->ms_activation_weight != 0 && weight != 0)
WEIGHT_SET_ACTIVE(weight, WEIGHT_GET_ACTIVE(msp->ms_weight));
return (weight);
}
/*
* Determine if we should attempt to allocate from this metaslab. If the
* metaslab has a maximum size then we can quickly determine if the desired
* allocation size can be satisfied. Otherwise, if we're using segment-based
* weighting then we can determine the maximum allocation that this metaslab
* can accommodate based on the index encoded in the weight. If we're using
* space-based weights then rely on the entire weight (excluding the weight
* type bit).
*/
boolean_t
metaslab_should_allocate(metaslab_t *msp, uint64_t asize)
{
boolean_t should_allocate;
if (msp->ms_max_size != 0)
return (msp->ms_max_size >= asize);
if (!WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
/*
* The metaslab segment weight indicates segments in the
* range [2^i, 2^(i+1)), where i is the index in the weight.
* Since the asize might be in the middle of the range, we
* should attempt the allocation if asize < 2^(i+1).
*/
should_allocate = (asize <
1ULL << (WEIGHT_GET_INDEX(msp->ms_weight) + 1));
} else {
should_allocate = (asize <=
(msp->ms_weight & ~METASLAB_WEIGHT_TYPE));
}
return (should_allocate);
}
static uint64_t
metaslab_weight(metaslab_t *msp)
{
vdev_t *vd = msp->ms_group->mg_vd;
spa_t *spa = vd->vdev_spa;
uint64_t weight;
ASSERT(MUTEX_HELD(&msp->ms_lock));
/*
* This vdev is in the process of being removed so there is nothing
* for us to do here.
*/
if (vd->vdev_removing) {
ASSERT0(space_map_allocated(msp->ms_sm));
ASSERT0(vd->vdev_ms_shift);
return (0);
}
metaslab_set_fragmentation(msp);
/*
* Update the maximum size if the metaslab is loaded. This will
* ensure that we get an accurate maximum size if newly freed space
* has been added back into the free tree.
*/
if (msp->ms_loaded)
msp->ms_max_size = metaslab_block_maxsize(msp);
/*
* Segment-based weighting requires space map histogram support.
*/
if (zfs_metaslab_segment_weight_enabled &&
spa_feature_is_enabled(spa, SPA_FEATURE_SPACEMAP_HISTOGRAM) &&
(msp->ms_sm == NULL || msp->ms_sm->sm_dbuf->db_size ==
sizeof (space_map_phys_t))) {
weight = metaslab_segment_weight(msp);
} else {
weight = metaslab_space_weight(msp);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
return (weight);
2008-11-20 20:01:55 +00:00
}
static int
metaslab_activate(metaslab_t *msp, uint64_t activation_weight)
2008-11-20 20:01:55 +00:00
{
ASSERT(MUTEX_HELD(&msp->ms_lock));
if ((msp->ms_weight & METASLAB_ACTIVE_MASK) == 0) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_load_wait(msp);
if (!msp->ms_loaded) {
int error = metaslab_load(msp);
if (error) {
metaslab_group_sort(msp->ms_group, msp, 0);
return (error);
}
2008-11-20 20:01:55 +00:00
}
2009-07-02 22:44:48 +00:00
msp->ms_activation_weight = msp->ms_weight;
2008-11-20 20:01:55 +00:00
metaslab_group_sort(msp->ms_group, msp,
msp->ms_weight | activation_weight);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(msp->ms_loaded);
2008-11-20 20:01:55 +00:00
ASSERT(msp->ms_weight & METASLAB_ACTIVE_MASK);
return (0);
}
static void
metaslab_passivate(metaslab_t *msp, uint64_t weight)
2008-11-20 20:01:55 +00:00
{
ASSERTV(uint64_t size = weight & ~METASLAB_WEIGHT_TYPE);
2008-11-20 20:01:55 +00:00
/*
* If size < SPA_MINBLOCKSIZE, then we will not allocate from
* this metaslab again. In that case, it had better be empty,
* or we would be leaving space on the table.
*/
ASSERT(size >= SPA_MINBLOCKSIZE ||
range_tree_space(msp->ms_tree) == 0);
ASSERT0(weight & METASLAB_ACTIVE_MASK);
msp->ms_activation_weight = 0;
metaslab_group_sort(msp->ms_group, msp, weight);
2008-11-20 20:01:55 +00:00
ASSERT((msp->ms_weight & METASLAB_ACTIVE_MASK) == 0);
}
/*
* Segment-based metaslabs are activated once and remain active until
* we either fail an allocation attempt (similar to space-based metaslabs)
* or have exhausted the free space in zfs_metaslab_switch_threshold
* buckets since the metaslab was activated. This function checks to see
* if we've exhaused the zfs_metaslab_switch_threshold buckets in the
* metaslab and passivates it proactively. This will allow us to select a
* metaslab with a larger contiguous region, if any, remaining within this
* metaslab group. If we're in sync pass > 1, then we continue using this
* metaslab so that we don't dirty more block and cause more sync passes.
*/
void
metaslab_segment_may_passivate(metaslab_t *msp)
{
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
uint64_t weight;
int activation_idx, current_idx;
if (WEIGHT_IS_SPACEBASED(msp->ms_weight) || spa_sync_pass(spa) > 1)
return;
/*
* Since we are in the middle of a sync pass, the most accurate
* information that is accessible to us is the in-core range tree
* histogram; calculate the new weight based on that information.
*/
weight = metaslab_weight_from_range_tree(msp);
activation_idx = WEIGHT_GET_INDEX(msp->ms_activation_weight);
current_idx = WEIGHT_GET_INDEX(weight);
if (current_idx <= activation_idx - zfs_metaslab_switch_threshold)
metaslab_passivate(msp, weight);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
static void
metaslab_preload(void *arg)
{
metaslab_t *msp = arg;
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
fstrans_cookie_t cookie = spl_fstrans_mark();
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(!MUTEX_HELD(&msp->ms_group->mg_lock));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
mutex_enter(&msp->ms_lock);
metaslab_load_wait(msp);
if (!msp->ms_loaded)
(void) metaslab_load(msp);
msp->ms_selected_txg = spa_syncing_txg(spa);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
mutex_exit(&msp->ms_lock);
spl_fstrans_unmark(cookie);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
static void
metaslab_group_preload(metaslab_group_t *mg)
{
spa_t *spa = mg->mg_vd->vdev_spa;
metaslab_t *msp;
avl_tree_t *t = &mg->mg_metaslab_tree;
int m = 0;
if (spa_shutting_down(spa) || !metaslab_preload_enabled) {
taskq_wait_outstanding(mg->mg_taskq, 0);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
return;
}
mutex_enter(&mg->mg_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Load the next potential metaslabs
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
for (msp = avl_first(t); msp != NULL; msp = AVL_NEXT(t, msp)) {
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* We preload only the maximum number of metaslabs specified
* by metaslab_preload_limit. If a metaslab is being forced
* to condense then we preload it too. This will ensure
* that force condensing happens in the next txg.
*/
if (++m > metaslab_preload_limit && !msp->ms_condense_wanted) {
continue;
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
VERIFY(taskq_dispatch(mg->mg_taskq, metaslab_preload,
msp, TQ_SLEEP) != TASKQID_INVALID);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
mutex_exit(&mg->mg_lock);
}
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Determine if the space map's on-disk footprint is past our tolerance
* for inefficiency. We would like to use the following criteria to make
* our decision:
*
* 1. The size of the space map object should not dramatically increase as a
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* result of writing out the free space range tree.
*
* 2. The minimal on-disk space map representation is zfs_condense_pct/100
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* times the size than the free space range tree representation
* (i.e. zfs_condense_pct = 110 and in-core = 1MB, minimal = 1.1.MB).
*
* 3. The on-disk size of the space map should actually decrease.
*
* Checking the first condition is tricky since we don't want to walk
* the entire AVL tree calculating the estimated on-disk size. Instead we
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* use the size-ordered range tree in the metaslab and calculate the
* size required to write out the largest segment in our free tree. If the
* size required to represent that segment on disk is larger than the space
* map object then we avoid condensing this map.
*
* To determine the second criterion we use a best-case estimate and assume
* each segment can be represented on-disk as a single 64-bit entry. We refer
* to this best-case estimate as the space map's minimal form.
*
* Unfortunately, we cannot compute the on-disk size of the space map in this
* context because we cannot accurately compute the effects of compression, etc.
* Instead, we apply the heuristic described in the block comment for
* zfs_metaslab_condense_block_threshold - we only condense if the space used
* is greater than a threshold number of blocks.
*/
static boolean_t
metaslab_should_condense(metaslab_t *msp)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_t *sm = msp->ms_sm;
range_seg_t *rs;
uint64_t size, entries, segsz, object_size, optimal_size, record_size;
dmu_object_info_t doi;
uint64_t vdev_blocksize = 1ULL << msp->ms_group->mg_vd->vdev_ashift;
ASSERT(MUTEX_HELD(&msp->ms_lock));
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(msp->ms_loaded);
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Use the ms_size_tree range tree, which is ordered by size, to
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
* obtain the largest segment in the free tree. We always condense
* metaslabs that are empty and metaslabs for which a condense
* request has been made.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
rs = avl_last(&msp->ms_size_tree);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
if (rs == NULL || msp->ms_condense_wanted)
return (B_TRUE);
/*
* Calculate the number of 64-bit entries this segment would
* require when written to disk. If this single segment would be
* larger on-disk than the entire current on-disk structure, then
* clearly condensing will increase the on-disk structure size.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
size = (rs->rs_end - rs->rs_start) >> sm->sm_shift;
entries = size / (MIN(size, SM_RUN_MAX));
segsz = entries * sizeof (uint64_t);
optimal_size = sizeof (uint64_t) * avl_numnodes(&msp->ms_tree->rt_root);
object_size = space_map_length(msp->ms_sm);
dmu_object_info_from_db(sm->sm_dbuf, &doi);
record_size = MAX(doi.doi_data_block_size, vdev_blocksize);
return (segsz <= object_size &&
object_size >= (optimal_size * zfs_condense_pct / 100) &&
object_size > zfs_metaslab_condense_block_threshold * record_size);
}
/*
* Condense the on-disk space map representation to its minimized form.
* The minimized form consists of a small number of allocations followed by
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* the entries of the free range tree.
*/
static void
metaslab_condense(metaslab_t *msp, uint64_t txg, dmu_tx_t *tx)
{
spa_t *spa = msp->ms_group->mg_vd->vdev_spa;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t *condense_tree;
space_map_t *sm = msp->ms_sm;
int t;
ASSERT(MUTEX_HELD(&msp->ms_lock));
ASSERT3U(spa_sync_pass(spa), ==, 1);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(msp->ms_loaded);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
spa_dbgmsg(spa, "condensing: txg %llu, msp[%llu] %p, vdev id %llu, "
"spa %s, smp size %llu, segments %lu, forcing condense=%s", txg,
msp->ms_id, msp, msp->ms_group->mg_vd->vdev_id,
msp->ms_group->mg_vd->vdev_spa->spa_name,
space_map_length(msp->ms_sm), avl_numnodes(&msp->ms_tree->rt_root),
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
msp->ms_condense_wanted ? "TRUE" : "FALSE");
msp->ms_condense_wanted = B_FALSE;
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Create an range tree that is 100% allocated. We remove segments
* that have been freed in this txg, any deferred frees that exist,
* and any allocation in the future. Removing segments should be
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* a relatively inexpensive operation since we expect these trees to
* have a small number of nodes.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
condense_tree = range_tree_create(NULL, NULL, &msp->ms_lock);
range_tree_add(condense_tree, msp->ms_start, msp->ms_size);
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Remove what's been freed in this txg from the condense_tree.
* Since we're in sync_pass 1, we know that all the frees from
* this txg are in the freeingtree.
*/
range_tree_walk(msp->ms_freeingtree, range_tree_remove, condense_tree);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
for (t = 0; t < TXG_DEFER_SIZE; t++) {
range_tree_walk(msp->ms_defertree[t],
range_tree_remove, condense_tree);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
for (t = 1; t < TXG_CONCURRENT_STATES; t++) {
range_tree_walk(msp->ms_alloctree[(txg + t) & TXG_MASK],
range_tree_remove, condense_tree);
}
/*
* We're about to drop the metaslab's lock thus allowing
* other consumers to change it's content. Set the
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* metaslab's ms_condensing flag to ensure that
* allocations on this metaslab do not occur while we're
* in the middle of committing it to disk. This is only critical
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* for the ms_tree as all other range trees use per txg
* views of their content.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
msp->ms_condensing = B_TRUE;
mutex_exit(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_truncate(sm, tx);
mutex_enter(&msp->ms_lock);
/*
* While we would ideally like to create a space map representation
* that consists only of allocation records, doing so can be
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* prohibitively expensive because the in-core free tree can be
* large, and therefore computationally expensive to subtract
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* from the condense_tree. Instead we sync out two trees, a cheap
* allocation only tree followed by the in-core free tree. While not
* optimal, this is typically close to optimal, and much cheaper to
* compute.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_write(sm, condense_tree, SM_ALLOC, tx);
range_tree_vacate(condense_tree, NULL, NULL);
range_tree_destroy(condense_tree);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_write(sm, msp->ms_tree, SM_FREE, tx);
msp->ms_condensing = B_FALSE;
}
2008-11-20 20:01:55 +00:00
/*
* Write a metaslab to disk in the context of the specified transaction group.
*/
void
metaslab_sync(metaslab_t *msp, uint64_t txg)
{
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_group_t *mg = msp->ms_group;
vdev_t *vd = mg->mg_vd;
2008-11-20 20:01:55 +00:00
spa_t *spa = vd->vdev_spa;
objset_t *mos = spa_meta_objset(spa);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t *alloctree = msp->ms_alloctree[txg & TXG_MASK];
2008-11-20 20:01:55 +00:00
dmu_tx_t *tx;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
uint64_t object = space_map_object(msp->ms_sm);
2008-11-20 20:01:55 +00:00
ASSERT(!vd->vdev_ishole);
/*
* This metaslab has just been added so there's no work to do now.
*/
if (msp->ms_freeingtree == NULL) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3P(alloctree, ==, NULL);
return;
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3P(alloctree, !=, NULL);
ASSERT3P(msp->ms_freeingtree, !=, NULL);
ASSERT3P(msp->ms_freedtree, !=, NULL);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
/*
* Normally, we don't want to process a metaslab if there
* are no allocations or frees to perform. However, if the metaslab
* is being forced to condense we need to let it through.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (range_tree_space(alloctree) == 0 &&
range_tree_space(msp->ms_freeingtree) == 0 &&
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
!msp->ms_condense_wanted)
return;
2008-11-20 20:01:55 +00:00
/*
* The only state that can actually be changing concurrently with
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* metaslab_sync() is the metaslab's ms_tree. No other thread can
* be modifying this txg's alloctree, freeingtree, freedtree, or
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* space_map_phys_t. Therefore, we only hold ms_lock to satify
* space map ASSERTs. We drop it whenever we call into the DMU,
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* because the DMU can call down to us (e.g. via zio_free()) at
* any time.
2008-11-20 20:01:55 +00:00
*/
tx = dmu_tx_create_assigned(spa_get_dsl(spa), txg);
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_sm == NULL) {
uint64_t new_object;
new_object = space_map_alloc(mos, tx);
VERIFY3U(new_object, !=, 0);
VERIFY0(space_map_open(&msp->ms_sm, mos, new_object,
msp->ms_start, msp->ms_size, vd->vdev_ashift,
&msp->ms_lock));
ASSERT(msp->ms_sm != NULL);
2008-11-20 20:01:55 +00:00
}
mutex_enter(&msp->ms_lock);
/*
* Note: metaslab_condense() clears the space map's histogram.
* Therefore we must verify and remove this histogram before
* condensing.
*/
metaslab_group_histogram_verify(mg);
metaslab_class_histogram_verify(mg->mg_class);
metaslab_group_histogram_remove(mg, msp);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_loaded && spa_sync_pass(spa) == 1 &&
metaslab_should_condense(msp)) {
metaslab_condense(msp, txg, tx);
} else {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_write(msp->ms_sm, alloctree, SM_ALLOC, tx);
space_map_write(msp->ms_sm, msp->ms_freeingtree, SM_FREE, tx);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_loaded) {
int t;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* When the space map is loaded, we have an accruate
* histogram in the range tree. This gives us an opportunity
* to bring the space map's histogram up-to-date so we clear
* it first before updating it.
*/
space_map_histogram_clear(msp->ms_sm);
space_map_histogram_add(msp->ms_sm, msp->ms_tree, tx);
/*
* Since we've cleared the histogram we need to add back
* any free space that has already been processed, plus
* any deferred space. This allows the on-disk histogram
* to accurately reflect all free space even if some space
* is not yet available for allocation (i.e. deferred).
*/
space_map_histogram_add(msp->ms_sm, msp->ms_freedtree, tx);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
/*
* Add back any deferred free space that has not been
* added back into the in-core free tree yet. This will
* ensure that we don't end up with a space map histogram
* that is completely empty unless the metaslab is fully
* allocated.
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
*/
for (t = 0; t < TXG_DEFER_SIZE; t++) {
space_map_histogram_add(msp->ms_sm,
msp->ms_defertree[t], tx);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
}
/*
* Always add the free space from this sync pass to the space
* map histogram. We want to make sure that the on-disk histogram
* accounts for all free space. If the space map is not loaded,
* then we will lose some accuracy but will correct it the next
* time we load the space map.
*/
space_map_histogram_add(msp->ms_sm, msp->ms_freeingtree, tx);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
metaslab_group_histogram_add(mg, msp);
metaslab_group_histogram_verify(mg);
metaslab_class_histogram_verify(mg->mg_class);
2008-11-20 20:01:55 +00:00
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* For sync pass 1, we avoid traversing this txg's free range tree
* and instead will just swap the pointers for freeingtree and
* freedtree. We can safely do this since the freed_tree is
* guaranteed to be empty on the initial pass.
*/
if (spa_sync_pass(spa) == 1) {
range_tree_swap(&msp->ms_freeingtree, &msp->ms_freedtree);
} else {
range_tree_vacate(msp->ms_freeingtree,
range_tree_add, msp->ms_freedtree);
2008-11-20 20:01:55 +00:00
}
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
range_tree_vacate(alloctree, NULL, NULL);
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT0(range_tree_space(msp->ms_alloctree[txg & TXG_MASK]));
ASSERT0(range_tree_space(msp->ms_alloctree[TXG_CLEAN(txg) & TXG_MASK]));
ASSERT0(range_tree_space(msp->ms_freeingtree));
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (object != space_map_object(msp->ms_sm)) {
object = space_map_object(msp->ms_sm);
dmu_write(mos, vd->vdev_ms_array, sizeof (uint64_t) *
msp->ms_id, sizeof (uint64_t), &object, tx);
}
2008-11-20 20:01:55 +00:00
dmu_tx_commit(tx);
}
/*
* Called after a transaction group has completely synced to mark
* all of the metaslab's free space as usable.
*/
void
metaslab_sync_done(metaslab_t *msp, uint64_t txg)
{
metaslab_group_t *mg = msp->ms_group;
vdev_t *vd = mg->mg_vd;
spa_t *spa = vd->vdev_spa;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_t **defer_tree;
int64_t alloc_delta, defer_delta;
uint64_t free_space;
boolean_t defer_allowed = B_TRUE;
int t;
ASSERT(!vd->vdev_ishole);
2008-11-20 20:01:55 +00:00
mutex_enter(&msp->ms_lock);
/*
* If this metaslab is just becoming available, initialize its
* range trees and add its capacity to the vdev.
2008-11-20 20:01:55 +00:00
*/
if (msp->ms_freedtree == NULL) {
for (t = 0; t < TXG_SIZE; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(msp->ms_alloctree[t] == NULL);
msp->ms_alloctree[t] = range_tree_create(NULL, msp,
&msp->ms_lock);
2008-11-20 20:01:55 +00:00
}
ASSERT3P(msp->ms_freeingtree, ==, NULL);
msp->ms_freeingtree = range_tree_create(NULL, msp,
&msp->ms_lock);
ASSERT3P(msp->ms_freedtree, ==, NULL);
msp->ms_freedtree = range_tree_create(NULL, msp,
&msp->ms_lock);
for (t = 0; t < TXG_DEFER_SIZE; t++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT(msp->ms_defertree[t] == NULL);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
msp->ms_defertree[t] = range_tree_create(NULL, msp,
&msp->ms_lock);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
vdev_space_update(vd, 0, 0, msp->ms_size);
2008-11-20 20:01:55 +00:00
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
defer_tree = &msp->ms_defertree[txg % TXG_DEFER_SIZE];
free_space = metaslab_class_get_space(spa_normal_class(spa)) -
metaslab_class_get_alloc(spa_normal_class(spa));
if (free_space <= spa_get_slop_space(spa)) {
defer_allowed = B_FALSE;
}
defer_delta = 0;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
alloc_delta = space_map_alloc_delta(msp->ms_sm);
if (defer_allowed) {
defer_delta = range_tree_space(msp->ms_freedtree) -
range_tree_space(*defer_tree);
} else {
defer_delta -= range_tree_space(*defer_tree);
}
vdev_space_update(vd, alloc_delta + defer_delta, defer_delta, 0);
2008-11-20 20:01:55 +00:00
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* If there's a metaslab_load() in progress, wait for it to complete
2008-11-20 20:01:55 +00:00
* so that we have a consistent view of the in-core space map.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_load_wait(msp);
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Move the frees from the defer_tree back to the free
* range tree (if it's loaded). Swap the freed_tree and the
* defer_tree -- this is safe to do because we've just emptied out
* the defer_tree.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_vacate(*defer_tree,
msp->ms_loaded ? range_tree_add : NULL, msp->ms_tree);
if (defer_allowed) {
range_tree_swap(&msp->ms_freedtree, defer_tree);
} else {
range_tree_vacate(msp->ms_freedtree,
msp->ms_loaded ? range_tree_add : NULL, msp->ms_tree);
}
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
space_map_update(msp->ms_sm);
2008-11-20 20:01:55 +00:00
msp->ms_deferspace += defer_delta;
ASSERT3S(msp->ms_deferspace, >=, 0);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
ASSERT3S(msp->ms_deferspace, <=, msp->ms_size);
if (msp->ms_deferspace != 0) {
/*
* Keep syncing this metaslab until all deferred frees
* are back in circulation.
*/
vdev_dirty(vd, VDD_METASLAB, msp, txg + 1);
}
/*
* Calculate the new weights before unloading any metaslabs.
* This will give us the most accurate weighting.
*/
metaslab_group_sort(mg, msp, metaslab_weight(msp));
/*
* If the metaslab is loaded and we've not tried to load or allocate
* from it in 'metaslab_unload_delay' txgs, then unload it.
*/
if (msp->ms_loaded &&
msp->ms_selected_txg + metaslab_unload_delay < txg) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
for (t = 1; t < TXG_CONCURRENT_STATES; t++) {
VERIFY0(range_tree_space(
msp->ms_alloctree[(txg + t) & TXG_MASK]));
}
2008-11-20 20:01:55 +00:00
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (!metaslab_debug_unload)
metaslab_unload(msp);
2008-11-20 20:01:55 +00:00
}
mutex_exit(&msp->ms_lock);
}
void
metaslab_sync_reassess(metaslab_group_t *mg)
{
metaslab_group_alloc_update(mg);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
mg->mg_fragmentation = metaslab_group_fragmentation(mg);
/*
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
* Preload the next potential metaslabs
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_group_preload(mg);
}
2008-11-20 20:01:55 +00:00
static uint64_t
metaslab_distance(metaslab_t *msp, dva_t *dva)
{
uint64_t ms_shift = msp->ms_group->mg_vd->vdev_ms_shift;
uint64_t offset = DVA_GET_OFFSET(dva) >> ms_shift;
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
uint64_t start = msp->ms_id;
2008-11-20 20:01:55 +00:00
if (msp->ms_group->mg_vd->vdev_id != DVA_GET_VDEV(dva))
return (1ULL << 63);
if (offset < start)
return ((start - offset) << ms_shift);
if (offset > start)
return ((offset - start) << ms_shift);
return (0);
}
/*
* ==========================================================================
* Metaslab allocation tracing facility
* ==========================================================================
*/
#ifdef _METASLAB_TRACING
kstat_t *metaslab_trace_ksp;
kstat_named_t metaslab_trace_over_limit;
void
metaslab_alloc_trace_init(void)
{
ASSERT(metaslab_alloc_trace_cache == NULL);
metaslab_alloc_trace_cache = kmem_cache_create(
"metaslab_alloc_trace_cache", sizeof (metaslab_alloc_trace_t),
0, NULL, NULL, NULL, NULL, NULL, 0);
metaslab_trace_ksp = kstat_create("zfs", 0, "metaslab_trace_stats",
"misc", KSTAT_TYPE_NAMED, 1, KSTAT_FLAG_VIRTUAL);
if (metaslab_trace_ksp != NULL) {
metaslab_trace_ksp->ks_data = &metaslab_trace_over_limit;
kstat_named_init(&metaslab_trace_over_limit,
"metaslab_trace_over_limit", KSTAT_DATA_UINT64);
kstat_install(metaslab_trace_ksp);
}
}
void
metaslab_alloc_trace_fini(void)
{
if (metaslab_trace_ksp != NULL) {
kstat_delete(metaslab_trace_ksp);
metaslab_trace_ksp = NULL;
}
kmem_cache_destroy(metaslab_alloc_trace_cache);
metaslab_alloc_trace_cache = NULL;
}
/*
* Add an allocation trace element to the allocation tracing list.
*/
static void
metaslab_trace_add(zio_alloc_list_t *zal, metaslab_group_t *mg,
metaslab_t *msp, uint64_t psize, uint32_t dva_id, uint64_t offset)
{
metaslab_alloc_trace_t *mat;
if (!metaslab_trace_enabled)
return;
/*
* When the tracing list reaches its maximum we remove
* the second element in the list before adding a new one.
* By removing the second element we preserve the original
* entry as a clue to what allocations steps have already been
* performed.
*/
if (zal->zal_size == metaslab_trace_max_entries) {
metaslab_alloc_trace_t *mat_next;
#ifdef DEBUG
panic("too many entries in allocation list");
#endif
atomic_inc_64(&metaslab_trace_over_limit.value.ui64);
zal->zal_size--;
mat_next = list_next(&zal->zal_list, list_head(&zal->zal_list));
list_remove(&zal->zal_list, mat_next);
kmem_cache_free(metaslab_alloc_trace_cache, mat_next);
}
mat = kmem_cache_alloc(metaslab_alloc_trace_cache, KM_SLEEP);
list_link_init(&mat->mat_list_node);
mat->mat_mg = mg;
mat->mat_msp = msp;
mat->mat_size = psize;
mat->mat_dva_id = dva_id;
mat->mat_offset = offset;
mat->mat_weight = 0;
if (msp != NULL)
mat->mat_weight = msp->ms_weight;
/*
* The list is part of the zio so locking is not required. Only
* a single thread will perform allocations for a given zio.
*/
list_insert_tail(&zal->zal_list, mat);
zal->zal_size++;
ASSERT3U(zal->zal_size, <=, metaslab_trace_max_entries);
}
void
metaslab_trace_init(zio_alloc_list_t *zal)
{
list_create(&zal->zal_list, sizeof (metaslab_alloc_trace_t),
offsetof(metaslab_alloc_trace_t, mat_list_node));
zal->zal_size = 0;
}
void
metaslab_trace_fini(zio_alloc_list_t *zal)
{
metaslab_alloc_trace_t *mat;
while ((mat = list_remove_head(&zal->zal_list)) != NULL)
kmem_cache_free(metaslab_alloc_trace_cache, mat);
list_destroy(&zal->zal_list);
zal->zal_size = 0;
}
#else
#define metaslab_trace_add(zal, mg, msp, psize, id, off)
void
metaslab_alloc_trace_init(void)
{
}
void
metaslab_alloc_trace_fini(void)
{
}
void
metaslab_trace_init(zio_alloc_list_t *zal)
{
}
void
metaslab_trace_fini(zio_alloc_list_t *zal)
{
}
#endif /* _METASLAB_TRACING */
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
/*
* ==========================================================================
* Metaslab block operations
* ==========================================================================
*/
static void
metaslab_group_alloc_increment(spa_t *spa, uint64_t vdev, void *tag, int flags)
{
metaslab_group_t *mg;
if (!(flags & METASLAB_ASYNC_ALLOC) ||
flags & METASLAB_DONT_THROTTLE)
return;
mg = vdev_lookup_top(spa, vdev)->vdev_mg;
if (!mg->mg_class->mc_alloc_throttle_enabled)
return;
(void) refcount_add(&mg->mg_alloc_queue_depth, tag);
}
void
metaslab_group_alloc_decrement(spa_t *spa, uint64_t vdev, void *tag, int flags)
{
metaslab_group_t *mg;
if (!(flags & METASLAB_ASYNC_ALLOC) ||
flags & METASLAB_DONT_THROTTLE)
return;
mg = vdev_lookup_top(spa, vdev)->vdev_mg;
if (!mg->mg_class->mc_alloc_throttle_enabled)
return;
(void) refcount_remove(&mg->mg_alloc_queue_depth, tag);
}
void
metaslab_group_alloc_verify(spa_t *spa, const blkptr_t *bp, void *tag)
{
#ifdef ZFS_DEBUG
const dva_t *dva = bp->blk_dva;
int ndvas = BP_GET_NDVAS(bp);
int d;
for (d = 0; d < ndvas; d++) {
uint64_t vdev = DVA_GET_VDEV(&dva[d]);
metaslab_group_t *mg = vdev_lookup_top(spa, vdev)->vdev_mg;
VERIFY(refcount_not_held(&mg->mg_alloc_queue_depth, tag));
}
#endif
}
2008-11-20 20:01:55 +00:00
static uint64_t
metaslab_block_alloc(metaslab_t *msp, uint64_t size, uint64_t txg)
{
uint64_t start;
range_tree_t *rt = msp->ms_tree;
metaslab_class_t *mc = msp->ms_group->mg_class;
VERIFY(!msp->ms_condensing);
start = mc->mc_ops->msop_alloc(msp, size);
if (start != -1ULL) {
metaslab_group_t *mg = msp->ms_group;
vdev_t *vd = mg->mg_vd;
VERIFY0(P2PHASE(start, 1ULL << vd->vdev_ashift));
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
VERIFY3U(range_tree_space(rt) - size, <=, msp->ms_size);
range_tree_remove(rt, start, size);
if (range_tree_space(msp->ms_alloctree[txg & TXG_MASK]) == 0)
vdev_dirty(mg->mg_vd, VDD_METASLAB, msp, txg);
range_tree_add(msp->ms_alloctree[txg & TXG_MASK], start, size);
/* Track the last successful allocation */
msp->ms_alloc_txg = txg;
metaslab_verify_space(msp, txg);
}
/*
* Now that we've attempted the allocation we need to update the
* metaslab's maximum block size since it may have changed.
*/
msp->ms_max_size = metaslab_block_maxsize(msp);
return (start);
}
static uint64_t
metaslab_group_alloc_normal(metaslab_group_t *mg, zio_alloc_list_t *zal,
uint64_t asize, uint64_t txg, uint64_t min_distance, dva_t *dva, int d)
2008-11-20 20:01:55 +00:00
{
metaslab_t *msp = NULL;
metaslab_t *search;
2008-11-20 20:01:55 +00:00
uint64_t offset = -1ULL;
uint64_t activation_weight;
uint64_t target_distance;
int i;
activation_weight = METASLAB_WEIGHT_PRIMARY;
2009-07-02 22:44:48 +00:00
for (i = 0; i < d; i++) {
if (DVA_GET_VDEV(&dva[i]) == mg->mg_vd->vdev_id) {
2008-11-20 20:01:55 +00:00
activation_weight = METASLAB_WEIGHT_SECONDARY;
2009-07-02 22:44:48 +00:00
break;
}
}
2008-11-20 20:01:55 +00:00
search = kmem_alloc(sizeof (*search), KM_SLEEP);
search->ms_weight = UINT64_MAX;
search->ms_start = 0;
2008-11-20 20:01:55 +00:00
for (;;) {
2009-07-02 22:44:48 +00:00
boolean_t was_active;
avl_tree_t *t = &mg->mg_metaslab_tree;
avl_index_t idx;
2009-07-02 22:44:48 +00:00
2008-11-20 20:01:55 +00:00
mutex_enter(&mg->mg_lock);
/*
* Find the metaslab with the highest weight that is less
* than what we've already tried. In the common case, this
* means that we will examine each metaslab at most once.
* Note that concurrent callers could reorder metaslabs
* by activation/passivation once we have dropped the mg_lock.
* If a metaslab is activated by another thread, and we fail
* to allocate from the metaslab we have selected, we may
* not try the newly-activated metaslab, and instead activate
* another metaslab. This is not optimal, but generally
* does not cause any problems (a possible exception being
* if every metaslab is completely full except for the
* the newly-activated metaslab which we fail to examine).
*/
msp = avl_find(t, search, &idx);
if (msp == NULL)
msp = avl_nearest(t, idx, AVL_AFTER);
for (; msp != NULL; msp = AVL_NEXT(t, msp)) {
if (!metaslab_should_allocate(msp, asize)) {
metaslab_trace_add(zal, mg, msp, asize, d,
TRACE_TOO_SMALL);
continue;
2008-11-20 20:01:55 +00:00
}
/*
* If the selected metaslab is condensing, skip it.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_condensing)
continue;
2009-07-02 22:44:48 +00:00
was_active = msp->ms_weight & METASLAB_ACTIVE_MASK;
2008-11-20 20:01:55 +00:00
if (activation_weight == METASLAB_WEIGHT_PRIMARY)
break;
target_distance = min_distance +
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
(space_map_allocated(msp->ms_sm) != 0 ? 0 :
min_distance >> 1);
2008-11-20 20:01:55 +00:00
for (i = 0; i < d; i++) {
2008-11-20 20:01:55 +00:00
if (metaslab_distance(msp, &dva[i]) <
target_distance)
break;
}
2008-11-20 20:01:55 +00:00
if (i == d)
break;
}
mutex_exit(&mg->mg_lock);
if (msp == NULL) {
kmem_free(search, sizeof (*search));
2008-11-20 20:01:55 +00:00
return (-1ULL);
}
search->ms_weight = msp->ms_weight;
search->ms_start = msp->ms_start + 1;
2008-11-20 20:01:55 +00:00
mutex_enter(&msp->ms_lock);
2008-11-20 20:01:55 +00:00
/*
* Ensure that the metaslab we have selected is still
* capable of handling our request. It's possible that
* another thread may have changed the weight while we
* were blocked on the metaslab lock. We check the
* active status first to see if we need to reselect
* a new metaslab.
2008-11-20 20:01:55 +00:00
*/
if (was_active && !(msp->ms_weight & METASLAB_ACTIVE_MASK)) {
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
continue;
}
if ((msp->ms_weight & METASLAB_WEIGHT_SECONDARY) &&
activation_weight == METASLAB_WEIGHT_PRIMARY) {
metaslab_passivate(msp,
msp->ms_weight & ~METASLAB_ACTIVE_MASK);
mutex_exit(&msp->ms_lock);
continue;
}
if (metaslab_activate(msp, activation_weight) != 0) {
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
continue;
}
msp->ms_selected_txg = txg;
/*
* Now that we have the lock, recheck to see if we should
* continue to use this metaslab for this allocation. The
* the metaslab is now loaded so metaslab_should_allocate() can
* accurately determine if the allocation attempt should
* proceed.
*/
if (!metaslab_should_allocate(msp, asize)) {
/* Passivate this metaslab and select a new one. */
metaslab_trace_add(zal, mg, msp, asize, d,
TRACE_TOO_SMALL);
goto next;
}
2008-11-20 20:01:55 +00:00
/*
* If this metaslab is currently condensing then pick again as
* we can't manipulate this metaslab until it's committed
* to disk.
*/
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_condensing) {
metaslab_trace_add(zal, mg, msp, asize, d,
TRACE_CONDENSING);
mutex_exit(&msp->ms_lock);
continue;
}
offset = metaslab_block_alloc(msp, asize, txg);
metaslab_trace_add(zal, mg, msp, asize, d, offset);
if (offset != -1ULL) {
/* Proactively passivate the metaslab, if needed */
metaslab_segment_may_passivate(msp);
2008-11-20 20:01:55 +00:00
break;
}
next:
ASSERT(msp->ms_loaded);
/*
* We were unable to allocate from this metaslab so determine
* a new weight for this metaslab. Now that we have loaded
* the metaslab we can provide a better hint to the metaslab
* selector.
*
* For space-based metaslabs, we use the maximum block size.
* This information is only available when the metaslab
* is loaded and is more accurate than the generic free
* space weight that was calculated by metaslab_weight().
* This information allows us to quickly compare the maximum
* available allocation in the metaslab to the allocation
* size being requested.
*
* For segment-based metaslabs, determine the new weight
* based on the highest bucket in the range tree. We
* explicitly use the loaded segment weight (i.e. the range
* tree histogram) since it contains the space that is
* currently available for allocation and is accurate
* even within a sync pass.
*/
if (WEIGHT_IS_SPACEBASED(msp->ms_weight)) {
uint64_t weight = metaslab_block_maxsize(msp);
WEIGHT_SET_SPACEBASED(weight);
metaslab_passivate(msp, weight);
} else {
metaslab_passivate(msp,
metaslab_weight_from_range_tree(msp));
}
2008-11-20 20:01:55 +00:00
/*
* We have just failed an allocation attempt, check
* that metaslab_should_allocate() agrees. Otherwise,
* we may end up in an infinite loop retrying the same
* metaslab.
*/
ASSERT(!metaslab_should_allocate(msp, asize));
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
}
mutex_exit(&msp->ms_lock);
kmem_free(search, sizeof (*search));
return (offset);
}
2008-11-20 20:01:55 +00:00
static uint64_t
metaslab_group_alloc(metaslab_group_t *mg, zio_alloc_list_t *zal,
uint64_t asize, uint64_t txg, uint64_t min_distance, dva_t *dva, int d)
{
uint64_t offset;
ASSERT(mg->mg_initialized);
2008-11-20 20:01:55 +00:00
offset = metaslab_group_alloc_normal(mg, zal, asize, txg,
min_distance, dva, d);
2008-11-20 20:01:55 +00:00
mutex_enter(&mg->mg_lock);
if (offset == -1ULL) {
mg->mg_failed_allocations++;
metaslab_trace_add(zal, mg, NULL, asize, d,
TRACE_GROUP_FAILURE);
if (asize == SPA_GANGBLOCKSIZE) {
/*
* This metaslab group was unable to allocate
* the minimum gang block size so it must be out of
* space. We must notify the allocation throttle
* to start skipping allocation attempts to this
* metaslab group until more space becomes available.
* Note: this failure cannot be caused by the
* allocation throttle since the allocation throttle
* is only responsible for skipping devices and
* not failing block allocations.
*/
mg->mg_no_free_space = B_TRUE;
}
}
mg->mg_allocations++;
mutex_exit(&mg->mg_lock);
2008-11-20 20:01:55 +00:00
return (offset);
}
/*
* If we have to write a ditto block (i.e. more than one DVA for a given BP)
* on the same vdev as an existing DVA of this BP, then try to allocate it
* at least (vdev_asize / (2 ^ ditto_same_vdev_distance_shift)) away from the
* existing DVAs.
*/
int ditto_same_vdev_distance_shift = 3;
2008-11-20 20:01:55 +00:00
/*
* Allocate a block for the specified i/o.
*/
static int
metaslab_alloc_dva(spa_t *spa, metaslab_class_t *mc, uint64_t psize,
dva_t *dva, int d, dva_t *hintdva, uint64_t txg, int flags,
zio_alloc_list_t *zal)
2008-11-20 20:01:55 +00:00
{
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
metaslab_group_t *mg, *fast_mg, *rotor;
2008-11-20 20:01:55 +00:00
vdev_t *vd;
boolean_t try_hard = B_FALSE;
2008-11-20 20:01:55 +00:00
ASSERT(!DVA_IS_VALID(&dva[d]));
/*
* For testing, make some blocks above a certain size be gang blocks.
*/
if (psize >= metaslab_gang_bang && (ddi_get_lbolt() & 3) == 0) {
metaslab_trace_add(zal, NULL, NULL, psize, d, TRACE_FORCE_GANG);
return (SET_ERROR(ENOSPC));
}
2008-11-20 20:01:55 +00:00
/*
* Start at the rotor and loop through all mgs until we find something.
* Note that there's no locking on mc_rotor or mc_aliquot because
2008-11-20 20:01:55 +00:00
* nothing actually breaks if we miss a few updates -- we just won't
* allocate quite as evenly. It all balances out over time.
*
* If we are doing ditto or log blocks, try to spread them across
* consecutive vdevs. If we're forced to reuse a vdev before we've
* allocated all of our ditto blocks, then try and spread them out on
* that vdev as much as possible. If it turns out to not be possible,
* gradually lower our standards until anything becomes acceptable.
* Also, allocating on consecutive vdevs (as opposed to random vdevs)
* gives us hope of containing our fault domains to something we're
* able to reason about. Otherwise, any two top-level vdev failures
* will guarantee the loss of data. With consecutive allocation,
* only two adjacent top-level vdev failures will result in data loss.
*
* If we are doing gang blocks (hintdva is non-NULL), try to keep
* ourselves on the same vdev as our gang block header. That
* way, we can hope for locality in vdev_cache, plus it makes our
* fault domains something tractable.
*/
if (hintdva) {
vd = vdev_lookup_top(spa, DVA_GET_VDEV(&hintdva[d]));
/*
* It's possible the vdev we're using as the hint no
* longer exists (i.e. removed). Consult the rotor when
* all else fails.
*/
if (vd != NULL) {
2008-11-20 20:01:55 +00:00
mg = vd->vdev_mg;
if (flags & METASLAB_HINTBP_AVOID &&
mg->mg_next != NULL)
mg = mg->mg_next;
} else {
mg = mc->mc_rotor;
}
2008-11-20 20:01:55 +00:00
} else if (d != 0) {
vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d - 1]));
mg = vd->vdev_mg->mg_next;
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
} else if (flags & METASLAB_FASTWRITE) {
mg = fast_mg = mc->mc_rotor;
do {
if (fast_mg->mg_vd->vdev_pending_fastwrite <
mg->mg_vd->vdev_pending_fastwrite)
mg = fast_mg;
} while ((fast_mg = fast_mg->mg_next) != mc->mc_rotor);
2008-11-20 20:01:55 +00:00
} else {
mg = mc->mc_rotor;
}
/*
* If the hint put us into the wrong metaslab class, or into a
* metaslab group that has been passivated, just follow the rotor.
2008-11-20 20:01:55 +00:00
*/
if (mg->mg_class != mc || mg->mg_activation_count <= 0)
2008-11-20 20:01:55 +00:00
mg = mc->mc_rotor;
rotor = mg;
top:
do {
boolean_t allocatable;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
uint64_t offset;
uint64_t distance, asize;
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
ASSERT(mg->mg_activation_count == 1);
2008-11-20 20:01:55 +00:00
vd = mg->mg_vd;
2009-01-15 21:59:39 +00:00
2008-11-20 20:01:55 +00:00
/*
* Don't allocate from faulted devices.
2008-11-20 20:01:55 +00:00
*/
if (try_hard) {
2009-01-15 21:59:39 +00:00
spa_config_enter(spa, SCL_ZIO, FTAG, RW_READER);
allocatable = vdev_allocatable(vd);
spa_config_exit(spa, SCL_ZIO, FTAG);
} else {
allocatable = vdev_allocatable(vd);
}
/*
* Determine if the selected metaslab group is eligible
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
* for allocations. If we're ganging then don't allow
* this metaslab group to skip allocations since that would
* inadvertently return ENOSPC and suspend the pool
* even though space is still available.
*/
if (allocatable && !GANG_ALLOCATION(flags) && !try_hard) {
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
allocatable = metaslab_group_allocatable(mg, rotor,
psize);
}
if (!allocatable) {
metaslab_trace_add(zal, mg, NULL, psize, d,
TRACE_NOT_ALLOCATABLE);
2008-11-20 20:01:55 +00:00
goto next;
}
2009-01-15 21:59:39 +00:00
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
ASSERT(mg->mg_initialized);
2008-11-20 20:01:55 +00:00
/*
* Avoid writing single-copy data to a failing,
* non-redundant vdev, unless we've already tried all
* other vdevs.
2008-11-20 20:01:55 +00:00
*/
if ((vd->vdev_stat.vs_write_errors > 0 ||
vd->vdev_state < VDEV_STATE_HEALTHY) &&
d == 0 && !try_hard && vd->vdev_children == 0) {
metaslab_trace_add(zal, mg, NULL, psize, d,
TRACE_VDEV_ERROR);
2008-11-20 20:01:55 +00:00
goto next;
}
ASSERT(mg->mg_class == mc);
/*
* If we don't need to try hard, then require that the
* block be 1/8th of the device away from any other DVAs
* in this BP. If we are trying hard, allow any offset
* to be used (distance=0).
*/
distance = 0;
if (!try_hard) {
distance = vd->vdev_asize >>
ditto_same_vdev_distance_shift;
if (distance <= (1ULL << vd->vdev_ms_shift))
distance = 0;
}
2008-11-20 20:01:55 +00:00
asize = vdev_psize_to_asize(vd, psize);
ASSERT(P2PHASE(asize, 1ULL << vd->vdev_ashift) == 0);
offset = metaslab_group_alloc(mg, zal, asize, txg, distance,
dva, d);
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
2008-11-20 20:01:55 +00:00
if (offset != -1ULL) {
/*
* If we've just selected this metaslab group,
* figure out whether the corresponding vdev is
* over- or under-used relative to the pool,
* and set an allocation bias to even it out.
Allocate disk space fairly in the presence of vdevs of unequal size. The metaslab allocator device selection algorithm contains a bias mechanism whose goal is to achieve roughly equal disk space usage across all top-level vdevs. It seems that the initial rationale for this code was to allow newly added (empty) vdevs to "come up to speed" faster in an attempt to make the pool quickly converge to a steady state where all vdevs are equally utilized. While the code seems to work reasonably well for this use case, there is another scenario in which this algorithm fails miserably: the case where top-level vdevs don't have the same sizes (capacities). ZFS allows this, and it is a good feature to have, so that users who simply want to build a pool with the disks they happen to have lying around can do so even if the disks have heteregenous sizes. Here's a script that simulates a pool with two vdevs, with one 4X larger than the other: dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728 dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912 zpool create testspace /tmp/d1 /tmp/d2 dd if=/dev/zero of=/testspace/foobar bs=1M count=256 zpool iostat -v testspace Before this commit, the script would output the following: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 104M 18.5M /tmp/d2 148M 356M ---------- ----- ----- This demonstrates that the current code handles this situation very poorly: d1 shows 85% usage despite the pool itself being only 40% full. d1 is quite saturated at this point, and is slowing down the entire pool due to saturation, fragmentation and the like. In contrast, here's the result with the code in this commit: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 56.7M 66.3M /tmp/d2 195M 309M ---------- ----- ------ This looks much better. d1 is 46% used, which is close to the overall pool utilization (40%). The code still doesn't result in perfectly balanced allocation, probably because of the way mg_bias is applied which does not guarantee perfect accuracy, but this is still much better than before. Signed-off-by: Etienne Dechamps <etienne@edechamps.fr> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3389
2015-05-10 14:39:18 +00:00
*
* Bias is also used to compensate for unequally
* sized vdevs so that space is allocated fairly.
2008-11-20 20:01:55 +00:00
*/
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
if (mc->mc_aliquot == 0 && metaslab_bias_enabled) {
2008-11-20 20:01:55 +00:00
vdev_stat_t *vs = &vd->vdev_stat;
Allocate disk space fairly in the presence of vdevs of unequal size. The metaslab allocator device selection algorithm contains a bias mechanism whose goal is to achieve roughly equal disk space usage across all top-level vdevs. It seems that the initial rationale for this code was to allow newly added (empty) vdevs to "come up to speed" faster in an attempt to make the pool quickly converge to a steady state where all vdevs are equally utilized. While the code seems to work reasonably well for this use case, there is another scenario in which this algorithm fails miserably: the case where top-level vdevs don't have the same sizes (capacities). ZFS allows this, and it is a good feature to have, so that users who simply want to build a pool with the disks they happen to have lying around can do so even if the disks have heteregenous sizes. Here's a script that simulates a pool with two vdevs, with one 4X larger than the other: dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728 dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912 zpool create testspace /tmp/d1 /tmp/d2 dd if=/dev/zero of=/testspace/foobar bs=1M count=256 zpool iostat -v testspace Before this commit, the script would output the following: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 104M 18.5M /tmp/d2 148M 356M ---------- ----- ----- This demonstrates that the current code handles this situation very poorly: d1 shows 85% usage despite the pool itself being only 40% full. d1 is quite saturated at this point, and is slowing down the entire pool due to saturation, fragmentation and the like. In contrast, here's the result with the code in this commit: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 56.7M 66.3M /tmp/d2 195M 309M ---------- ----- ------ This looks much better. d1 is 46% used, which is close to the overall pool utilization (40%). The code still doesn't result in perfectly balanced allocation, probably because of the way mg_bias is applied which does not guarantee perfect accuracy, but this is still much better than before. Signed-off-by: Etienne Dechamps <etienne@edechamps.fr> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3389
2015-05-10 14:39:18 +00:00
int64_t vs_free = vs->vs_space - vs->vs_alloc;
int64_t mc_free = mc->mc_space - mc->mc_alloc;
int64_t ratio;
2008-11-20 20:01:55 +00:00
/*
* Calculate how much more or less we should
* try to allocate from this device during
* this iteration around the rotor.
*
Allocate disk space fairly in the presence of vdevs of unequal size. The metaslab allocator device selection algorithm contains a bias mechanism whose goal is to achieve roughly equal disk space usage across all top-level vdevs. It seems that the initial rationale for this code was to allow newly added (empty) vdevs to "come up to speed" faster in an attempt to make the pool quickly converge to a steady state where all vdevs are equally utilized. While the code seems to work reasonably well for this use case, there is another scenario in which this algorithm fails miserably: the case where top-level vdevs don't have the same sizes (capacities). ZFS allows this, and it is a good feature to have, so that users who simply want to build a pool with the disks they happen to have lying around can do so even if the disks have heteregenous sizes. Here's a script that simulates a pool with two vdevs, with one 4X larger than the other: dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728 dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912 zpool create testspace /tmp/d1 /tmp/d2 dd if=/dev/zero of=/testspace/foobar bs=1M count=256 zpool iostat -v testspace Before this commit, the script would output the following: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 104M 18.5M /tmp/d2 148M 356M ---------- ----- ----- This demonstrates that the current code handles this situation very poorly: d1 shows 85% usage despite the pool itself being only 40% full. d1 is quite saturated at this point, and is slowing down the entire pool due to saturation, fragmentation and the like. In contrast, here's the result with the code in this commit: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 56.7M 66.3M /tmp/d2 195M 309M ---------- ----- ------ This looks much better. d1 is 46% used, which is close to the overall pool utilization (40%). The code still doesn't result in perfectly balanced allocation, probably because of the way mg_bias is applied which does not guarantee perfect accuracy, but this is still much better than before. Signed-off-by: Etienne Dechamps <etienne@edechamps.fr> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3389
2015-05-10 14:39:18 +00:00
* This basically introduces a zero-centered
* bias towards the devices with the most
* free space, while compensating for vdev
* size differences.
*
* Examples:
* vdev V1 = 16M/128M
* vdev V2 = 16M/128M
* ratio(V1) = 100% ratio(V2) = 100%
*
* vdev V1 = 16M/128M
* vdev V2 = 64M/128M
* ratio(V1) = 127% ratio(V2) = 72%
*
Allocate disk space fairly in the presence of vdevs of unequal size. The metaslab allocator device selection algorithm contains a bias mechanism whose goal is to achieve roughly equal disk space usage across all top-level vdevs. It seems that the initial rationale for this code was to allow newly added (empty) vdevs to "come up to speed" faster in an attempt to make the pool quickly converge to a steady state where all vdevs are equally utilized. While the code seems to work reasonably well for this use case, there is another scenario in which this algorithm fails miserably: the case where top-level vdevs don't have the same sizes (capacities). ZFS allows this, and it is a good feature to have, so that users who simply want to build a pool with the disks they happen to have lying around can do so even if the disks have heteregenous sizes. Here's a script that simulates a pool with two vdevs, with one 4X larger than the other: dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728 dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912 zpool create testspace /tmp/d1 /tmp/d2 dd if=/dev/zero of=/testspace/foobar bs=1M count=256 zpool iostat -v testspace Before this commit, the script would output the following: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 104M 18.5M /tmp/d2 148M 356M ---------- ----- ----- This demonstrates that the current code handles this situation very poorly: d1 shows 85% usage despite the pool itself being only 40% full. d1 is quite saturated at this point, and is slowing down the entire pool due to saturation, fragmentation and the like. In contrast, here's the result with the code in this commit: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 56.7M 66.3M /tmp/d2 195M 309M ---------- ----- ------ This looks much better. d1 is 46% used, which is close to the overall pool utilization (40%). The code still doesn't result in perfectly balanced allocation, probably because of the way mg_bias is applied which does not guarantee perfect accuracy, but this is still much better than before. Signed-off-by: Etienne Dechamps <etienne@edechamps.fr> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3389
2015-05-10 14:39:18 +00:00
* vdev V1 = 16M/128M
* vdev V2 = 64M/512M
* ratio(V1) = 40% ratio(V2) = 160%
2008-11-20 20:01:55 +00:00
*/
Allocate disk space fairly in the presence of vdevs of unequal size. The metaslab allocator device selection algorithm contains a bias mechanism whose goal is to achieve roughly equal disk space usage across all top-level vdevs. It seems that the initial rationale for this code was to allow newly added (empty) vdevs to "come up to speed" faster in an attempt to make the pool quickly converge to a steady state where all vdevs are equally utilized. While the code seems to work reasonably well for this use case, there is another scenario in which this algorithm fails miserably: the case where top-level vdevs don't have the same sizes (capacities). ZFS allows this, and it is a good feature to have, so that users who simply want to build a pool with the disks they happen to have lying around can do so even if the disks have heteregenous sizes. Here's a script that simulates a pool with two vdevs, with one 4X larger than the other: dd if=/dev/zero of=/tmp/d1 bs=1 count=1 seek=134217728 dd if=/dev/zero of=/tmp/d2 bs=1 count=1 seek=536870912 zpool create testspace /tmp/d1 /tmp/d2 dd if=/dev/zero of=/testspace/foobar bs=1M count=256 zpool iostat -v testspace Before this commit, the script would output the following: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 104M 18.5M /tmp/d2 148M 356M ---------- ----- ----- This demonstrates that the current code handles this situation very poorly: d1 shows 85% usage despite the pool itself being only 40% full. d1 is quite saturated at this point, and is slowing down the entire pool due to saturation, fragmentation and the like. In contrast, here's the result with the code in this commit: capacity pool alloc free ---------- ----- ----- testspace 252M 375M /tmp/d1 56.7M 66.3M /tmp/d2 195M 309M ---------- ----- ------ This looks much better. d1 is 46% used, which is close to the overall pool utilization (40%). The code still doesn't result in perfectly balanced allocation, probably because of the way mg_bias is applied which does not guarantee perfect accuracy, but this is still much better than before. Signed-off-by: Etienne Dechamps <etienne@edechamps.fr> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #3389
2015-05-10 14:39:18 +00:00
ratio = (vs_free * mc->mc_alloc_groups * 100) /
(mc_free + 1);
mg->mg_bias = ((ratio - 100) *
(int64_t)mg->mg_aliquot) / 100;
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
} else if (!metaslab_bias_enabled) {
mg->mg_bias = 0;
2008-11-20 20:01:55 +00:00
}
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
if ((flags & METASLAB_FASTWRITE) ||
atomic_add_64_nv(&mc->mc_aliquot, asize) >=
2008-11-20 20:01:55 +00:00
mg->mg_aliquot + mg->mg_bias) {
mc->mc_rotor = mg->mg_next;
mc->mc_aliquot = 0;
2008-11-20 20:01:55 +00:00
}
DVA_SET_VDEV(&dva[d], vd->vdev_id);
DVA_SET_OFFSET(&dva[d], offset);
DVA_SET_GANG(&dva[d],
((flags & METASLAB_GANG_HEADER) ? 1 : 0));
2008-11-20 20:01:55 +00:00
DVA_SET_ASIZE(&dva[d], asize);
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
if (flags & METASLAB_FASTWRITE) {
atomic_add_64(&vd->vdev_pending_fastwrite,
psize);
}
2008-11-20 20:01:55 +00:00
return (0);
}
next:
mc->mc_rotor = mg->mg_next;
mc->mc_aliquot = 0;
2008-11-20 20:01:55 +00:00
} while ((mg = mg->mg_next) != rotor);
/*
* If we haven't tried hard, do so now.
*/
if (!try_hard) {
try_hard = B_TRUE;
2009-01-15 21:59:39 +00:00
goto top;
}
2008-11-20 20:01:55 +00:00
bzero(&dva[d], sizeof (dva_t));
metaslab_trace_add(zal, rotor, NULL, psize, d, TRACE_ENOSPC);
return (SET_ERROR(ENOSPC));
2008-11-20 20:01:55 +00:00
}
/*
* Free the block represented by DVA in the context of the specified
* transaction group.
*/
static void
metaslab_free_dva(spa_t *spa, const dva_t *dva, uint64_t txg, boolean_t now)
{
uint64_t vdev = DVA_GET_VDEV(dva);
uint64_t offset = DVA_GET_OFFSET(dva);
uint64_t size = DVA_GET_ASIZE(dva);
vdev_t *vd;
metaslab_t *msp;
if (txg > spa_freeze_txg(spa))
return;
if ((vd = vdev_lookup_top(spa, vdev)) == NULL || !DVA_IS_VALID(dva) ||
2008-11-20 20:01:55 +00:00
(offset >> vd->vdev_ms_shift) >= vd->vdev_ms_count) {
zfs_panic_recover("metaslab_free_dva(): bad DVA %llu:%llu:%llu",
(u_longlong_t)vdev, (u_longlong_t)offset,
(u_longlong_t)size);
2008-11-20 20:01:55 +00:00
return;
}
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
if (DVA_GET_GANG(dva))
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
mutex_enter(&msp->ms_lock);
if (now) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_remove(msp->ms_alloctree[txg & TXG_MASK],
2008-11-20 20:01:55 +00:00
offset, size);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
VERIFY(!msp->ms_condensing);
VERIFY3U(offset, >=, msp->ms_start);
VERIFY3U(offset + size, <=, msp->ms_start + msp->ms_size);
VERIFY3U(range_tree_space(msp->ms_tree) + size, <=,
msp->ms_size);
VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
range_tree_add(msp->ms_tree, offset, size);
msp->ms_max_size = metaslab_block_maxsize(msp);
2008-11-20 20:01:55 +00:00
} else {
VERIFY3U(txg, ==, spa->spa_syncing_txg);
if (range_tree_space(msp->ms_freeingtree) == 0)
2008-11-20 20:01:55 +00:00
vdev_dirty(vd, VDD_METASLAB, msp, txg);
range_tree_add(msp->ms_freeingtree, offset, size);
2008-11-20 20:01:55 +00:00
}
mutex_exit(&msp->ms_lock);
}
/*
* Intent log support: upon opening the pool after a crash, notify the SPA
* of blocks that the intent log has allocated for immediate write, but
* which are still considered free by the SPA because the last transaction
* group didn't commit yet.
*/
static int
metaslab_claim_dva(spa_t *spa, const dva_t *dva, uint64_t txg)
{
uint64_t vdev = DVA_GET_VDEV(dva);
uint64_t offset = DVA_GET_OFFSET(dva);
uint64_t size = DVA_GET_ASIZE(dva);
vdev_t *vd;
metaslab_t *msp;
int error = 0;
2008-11-20 20:01:55 +00:00
ASSERT(DVA_IS_VALID(dva));
if ((vd = vdev_lookup_top(spa, vdev)) == NULL ||
(offset >> vd->vdev_ms_shift) >= vd->vdev_ms_count)
return (SET_ERROR(ENXIO));
2008-11-20 20:01:55 +00:00
msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
if (DVA_GET_GANG(dva))
size = vdev_psize_to_asize(vd, SPA_GANGBLOCKSIZE);
mutex_enter(&msp->ms_lock);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if ((txg != 0 && spa_writeable(spa)) || !msp->ms_loaded)
error = metaslab_activate(msp, METASLAB_WEIGHT_SECONDARY);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (error == 0 && !range_tree_contains(msp->ms_tree, offset, size))
error = SET_ERROR(ENOENT);
if (error || txg == 0) { /* txg == 0 indicates dry run */
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
return (error);
}
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
VERIFY(!msp->ms_condensing);
VERIFY0(P2PHASE(offset, 1ULL << vd->vdev_ashift));
VERIFY0(P2PHASE(size, 1ULL << vd->vdev_ashift));
VERIFY3U(range_tree_space(msp->ms_tree) - size, <=, msp->ms_size);
range_tree_remove(msp->ms_tree, offset, size);
2009-01-15 21:59:39 +00:00
if (spa_writeable(spa)) { /* don't dirty if we're zdb(1M) */
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (range_tree_space(msp->ms_alloctree[txg & TXG_MASK]) == 0)
vdev_dirty(vd, VDD_METASLAB, msp, txg);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_add(msp->ms_alloctree[txg & TXG_MASK], offset, size);
}
2008-11-20 20:01:55 +00:00
mutex_exit(&msp->ms_lock);
return (0);
}
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
/*
* Reserve some allocation slots. The reservation system must be called
* before we call into the allocator. If there aren't any available slots
* then the I/O will be throttled until an I/O completes and its slots are
* freed up. The function returns true if it was successful in placing
* the reservation.
*/
boolean_t
metaslab_class_throttle_reserve(metaslab_class_t *mc, int slots, zio_t *zio,
int flags)
{
uint64_t available_slots = 0;
uint64_t reserved_slots;
boolean_t slot_reserved = B_FALSE;
ASSERT(mc->mc_alloc_throttle_enabled);
mutex_enter(&mc->mc_lock);
reserved_slots = refcount_count(&mc->mc_alloc_slots);
if (reserved_slots < mc->mc_alloc_max_slots)
available_slots = mc->mc_alloc_max_slots - reserved_slots;
if (slots <= available_slots || GANG_ALLOCATION(flags)) {
int d;
/*
* We reserve the slots individually so that we can unreserve
* them individually when an I/O completes.
*/
for (d = 0; d < slots; d++) {
reserved_slots = refcount_add(&mc->mc_alloc_slots, zio);
}
zio->io_flags |= ZIO_FLAG_IO_ALLOCATING;
slot_reserved = B_TRUE;
}
mutex_exit(&mc->mc_lock);
return (slot_reserved);
}
void
metaslab_class_throttle_unreserve(metaslab_class_t *mc, int slots, zio_t *zio)
{
int d;
ASSERT(mc->mc_alloc_throttle_enabled);
mutex_enter(&mc->mc_lock);
for (d = 0; d < slots; d++) {
(void) refcount_remove(&mc->mc_alloc_slots, zio);
}
mutex_exit(&mc->mc_lock);
}
2008-11-20 20:01:55 +00:00
int
metaslab_alloc(spa_t *spa, metaslab_class_t *mc, uint64_t psize, blkptr_t *bp,
int ndvas, uint64_t txg, blkptr_t *hintbp, int flags,
zio_alloc_list_t *zal, zio_t *zio)
2008-11-20 20:01:55 +00:00
{
dva_t *dva = bp->blk_dva;
dva_t *hintdva = hintbp->blk_dva;
int d, error = 0;
2008-11-20 20:01:55 +00:00
ASSERT(bp->blk_birth == 0);
ASSERT(BP_PHYSICAL_BIRTH(bp) == 0);
spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
if (mc->mc_rotor == NULL) { /* no vdevs in this class */
spa_config_exit(spa, SCL_ALLOC, FTAG);
return (SET_ERROR(ENOSPC));
}
2008-11-20 20:01:55 +00:00
ASSERT(ndvas > 0 && ndvas <= spa_max_replication(spa));
ASSERT(BP_GET_NDVAS(bp) == 0);
ASSERT(hintbp == NULL || ndvas <= BP_GET_NDVAS(hintbp));
ASSERT3P(zal, !=, NULL);
2008-11-20 20:01:55 +00:00
for (d = 0; d < ndvas; d++) {
2008-11-20 20:01:55 +00:00
error = metaslab_alloc_dva(spa, mc, psize, dva, d, hintdva,
txg, flags, zal);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (error != 0) {
2008-11-20 20:01:55 +00:00
for (d--; d >= 0; d--) {
metaslab_free_dva(spa, &dva[d], txg, B_TRUE);
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
metaslab_group_alloc_decrement(spa,
DVA_GET_VDEV(&dva[d]), zio, flags);
2008-11-20 20:01:55 +00:00
bzero(&dva[d], sizeof (dva_t));
}
spa_config_exit(spa, SCL_ALLOC, FTAG);
2008-11-20 20:01:55 +00:00
return (error);
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
} else {
/*
* Update the metaslab group's queue depth
* based on the newly allocated dva.
*/
metaslab_group_alloc_increment(spa,
DVA_GET_VDEV(&dva[d]), zio, flags);
2008-11-20 20:01:55 +00:00
}
OpenZFS 7090 - zfs should throttle allocations OpenZFS 7090 - zfs should throttle allocations Authored by: George Wilson <george.wilson@delphix.com> Reviewed by: Alex Reece <alex@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Paul Dagnelie <paul.dagnelie@delphix.com> Reviewed by: Prakash Surya <prakash.surya@delphix.com> Reviewed by: Sebastien Roy <sebastien.roy@delphix.com> Approved by: Matthew Ahrens <mahrens@delphix.com> Ported-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> When write I/Os are issued, they are issued in block order but the ZIO pipeline will drive them asynchronously through the allocation stage which can result in blocks being allocated out-of-order. It would be nice to preserve as much of the logical order as possible. In addition, the allocations are equally scattered across all top-level VDEVs but not all top-level VDEVs are created equally. The pipeline should be able to detect devices that are more capable of handling allocations and should allocate more blocks to those devices. This allows for dynamic allocation distribution when devices are imbalanced as fuller devices will tend to be slower than empty devices. The change includes a new pool-wide allocation queue which would throttle and order allocations in the ZIO pipeline. The queue would be ordered by issued time and offset and would provide an initial amount of allocation of work to each top-level vdev. The allocation logic utilizes a reservation system to reserve allocations that will be performed by the allocator. Once an allocation is successfully completed it's scheduled on a given top-level vdev. Each top-level vdev maintains a maximum number of allocations that it can handle (mg_alloc_queue_depth). The pool-wide reserved allocations (top-levels * mg_alloc_queue_depth) are distributed across the top-level vdevs metaslab groups and round robin across all eligible metaslab groups to distribute the work. As top-levels complete their work, they receive additional work from the pool-wide allocation queue until the allocation queue is emptied. OpenZFS-issue: https://www.illumos.org/issues/7090 OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4756c3d7 Closes #5258 Porting Notes: - Maintained minimal stack in zio_done - Preserve linux-specific io sizes in zio_write_compress - Added module params and documentation - Updated to use optimize AVL cmp macros
2016-10-14 00:59:18 +00:00
2008-11-20 20:01:55 +00:00
}
ASSERT(error == 0);
ASSERT(BP_GET_NDVAS(bp) == ndvas);
spa_config_exit(spa, SCL_ALLOC, FTAG);
BP_SET_BIRTH(bp, txg, 0);
2008-11-20 20:01:55 +00:00
return (0);
}
void
metaslab_free(spa_t *spa, const blkptr_t *bp, uint64_t txg, boolean_t now)
{
const dva_t *dva = bp->blk_dva;
int d, ndvas = BP_GET_NDVAS(bp);
2008-11-20 20:01:55 +00:00
ASSERT(!BP_IS_HOLE(bp));
ASSERT(!now || bp->blk_birth >= spa_syncing_txg(spa));
spa_config_enter(spa, SCL_FREE, FTAG, RW_READER);
2008-11-20 20:01:55 +00:00
for (d = 0; d < ndvas; d++)
2008-11-20 20:01:55 +00:00
metaslab_free_dva(spa, &dva[d], txg, now);
spa_config_exit(spa, SCL_FREE, FTAG);
2008-11-20 20:01:55 +00:00
}
int
metaslab_claim(spa_t *spa, const blkptr_t *bp, uint64_t txg)
{
const dva_t *dva = bp->blk_dva;
int ndvas = BP_GET_NDVAS(bp);
int d, error = 0;
2008-11-20 20:01:55 +00:00
ASSERT(!BP_IS_HOLE(bp));
if (txg != 0) {
/*
* First do a dry run to make sure all DVAs are claimable,
* so we don't have to unwind from partial failures below.
*/
if ((error = metaslab_claim(spa, bp, 0)) != 0)
return (error);
}
spa_config_enter(spa, SCL_ALLOC, FTAG, RW_READER);
for (d = 0; d < ndvas; d++)
2008-11-20 20:01:55 +00:00
if ((error = metaslab_claim_dva(spa, &dva[d], txg)) != 0)
break;
spa_config_exit(spa, SCL_ALLOC, FTAG);
ASSERT(error == 0 || txg == 0);
2008-11-20 20:01:55 +00:00
return (error);
2008-11-20 20:01:55 +00:00
}
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
void
metaslab_fastwrite_mark(spa_t *spa, const blkptr_t *bp)
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
{
const dva_t *dva = bp->blk_dva;
int ndvas = BP_GET_NDVAS(bp);
uint64_t psize = BP_GET_PSIZE(bp);
int d;
vdev_t *vd;
ASSERT(!BP_IS_HOLE(bp));
ASSERT(!BP_IS_EMBEDDED(bp));
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
ASSERT(psize > 0);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
for (d = 0; d < ndvas; d++) {
if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
continue;
atomic_add_64(&vd->vdev_pending_fastwrite, psize);
}
spa_config_exit(spa, SCL_VDEV, FTAG);
}
void
metaslab_fastwrite_unmark(spa_t *spa, const blkptr_t *bp)
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
{
const dva_t *dva = bp->blk_dva;
int ndvas = BP_GET_NDVAS(bp);
uint64_t psize = BP_GET_PSIZE(bp);
int d;
vdev_t *vd;
ASSERT(!BP_IS_HOLE(bp));
ASSERT(!BP_IS_EMBEDDED(bp));
Add FASTWRITE algorithm for synchronous writes. Currently, ZIL blocks are spread over vdevs using hint block pointers managed by the ZIL commit code and passed to metaslab_alloc(). Spreading log blocks accross vdevs is important for performance: indeed, using mutliple disks in parallel decreases the ZIL commit latency, which is the main performance metric for synchronous writes. However, the current implementation suffers from the following issues: 1) It would be best if the ZIL module was not aware of such low-level details. They should be handled by the ZIO and metaslab modules; 2) Because the hint block pointer is managed per log, simultaneous commits from multiple logs might use the same vdevs at the same time, which is inefficient; 3) Because dmu_write() does not honor the block pointer hint, indirect writes are not spread. The naive solution of rotating the metaslab rotor each time a block is allocated for the ZIL or dmu_sync() doesn't work in practice because the first ZIL block to be written is actually allocated during the previous commit. Consequently, when metaslab_alloc() decides the vdev for this block, it will do so while a bunch of other allocations are happening at the same time (from dmu_sync() and other ZILs). This means the vdev for this block is chosen more or less at random. When the next commit happens, there is a high chance (especially when the number of blocks per commit is slightly less than the number of the disks) that one disk will have to write two blocks (with a potential seek) while other disks are sitting idle, which defeats spreading and increases the commit latency. This commit introduces a new concept in the metaslab allocator: fastwrites. Basically, each top-level vdev maintains a counter indicating the number of synchronous writes (from dmu_sync() and the ZIL) which have been allocated but not yet completed. When the metaslab is called with the FASTWRITE flag, it will choose the vdev with the least amount of pending synchronous writes. If there are multiple vdevs with the same value, the first matching vdev (starting from the rotor) is used. Once metaslab_alloc() has decided which vdev the block is allocated to, it updates the fastwrite counter for this vdev. The rationale goes like this: when an allocation is done with FASTWRITE, it "reserves" the vdev until the data is written. Until then, all future allocations will naturally avoid this vdev, even after a full rotation of the rotor. As a result, pending synchronous writes at a given point in time will be nicely spread over all vdevs. This contrasts with the previous algorithm, which is based on the implicit assumption that blocks are written instantaneously after they're allocated. metaslab_fastwrite_mark() and metaslab_fastwrite_unmark() are used to manually increase or decrease fastwrite counters, respectively. They should be used with caution, as there is no per-BP tracking of fastwrite information, so leaks and "double-unmarks" are possible. There is, however, an assert in the vdev teardown code which will fire if the fastwrite counters are not zero when the pool is exported or the vdev removed. Note that as stated above, marking is also done implictly by metaslab_alloc(). ZIO also got a new FASTWRITE flag; when it is used, ZIO will pass it to the metaslab when allocating (assuming ZIO does the allocation, which is only true in the case of dmu_sync). This flag will also trigger an unmark when zio_done() fires. A side-effect of the new algorithm is that when a ZIL stops being used, its last block can stay in the pending state (allocated but not yet written) for a long time, polluting the fastwrite counters. To avoid that, I've implemented a somewhat crude but working solution which unmarks these pending blocks in zil_sync(), thus guaranteeing that linguering fastwrites will get pruned at each sync event. The best performance improvements are observed with pools using a large number of top-level vdevs and heavy synchronous write workflows (especially indirect writes and concurrent writes from multiple ZILs). Real-life testing shows a 200% to 300% performance increase with indirect writes and various commit sizes. Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Issue #1013
2012-06-27 13:20:20 +00:00
ASSERT(psize > 0);
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
for (d = 0; d < ndvas; d++) {
if ((vd = vdev_lookup_top(spa, DVA_GET_VDEV(&dva[d]))) == NULL)
continue;
ASSERT3U(vd->vdev_pending_fastwrite, >=, psize);
atomic_sub_64(&vd->vdev_pending_fastwrite, psize);
}
spa_config_exit(spa, SCL_VDEV, FTAG);
}
void
metaslab_check_free(spa_t *spa, const blkptr_t *bp)
{
int i, j;
if ((zfs_flags & ZFS_DEBUG_ZIO_FREE) == 0)
return;
spa_config_enter(spa, SCL_VDEV, FTAG, RW_READER);
for (i = 0; i < BP_GET_NDVAS(bp); i++) {
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
uint64_t vdev = DVA_GET_VDEV(&bp->blk_dva[i]);
vdev_t *vd = vdev_lookup_top(spa, vdev);
uint64_t offset = DVA_GET_OFFSET(&bp->blk_dva[i]);
uint64_t size = DVA_GET_ASIZE(&bp->blk_dva[i]);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
metaslab_t *msp = vd->vdev_ms[offset >> vd->vdev_ms_shift];
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
if (msp->ms_loaded)
range_tree_verify(msp->ms_tree, offset, size);
range_tree_verify(msp->ms_freeingtree, offset, size);
range_tree_verify(msp->ms_freedtree, offset, size);
for (j = 0; j < TXG_DEFER_SIZE; j++)
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
range_tree_verify(msp->ms_defertree[j], offset, size);
}
spa_config_exit(spa, SCL_VDEV, FTAG);
}
#if defined(_KERNEL) && defined(HAVE_SPL)
/* CSTYLED */
module_param(metaslab_aliquot, ulong, 0644);
MODULE_PARM_DESC(metaslab_aliquot,
"allocation granularity (a.k.a. stripe size)");
module_param(metaslab_debug_load, int, 0644);
Illumos #4101, #4102, #4103, #4105, #4106 4101 metaslab_debug should allow for fine-grained control 4102 space_maps should store more information about themselves 4103 space map object blocksize should be increased 4105 removing a mirrored log device results in a leaked object 4106 asynchronously load metaslab Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <ahl@delphix.com> Reviewed by: Sebastien Roy <seb@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> Prior to this patch, space_maps were preferred solely based on the amount of free space left in each. Unfortunately, this heuristic didn't contain any information about the make-up of that free space, which meant we could keep preferring and loading a highly fragmented space map that wouldn't actually have enough contiguous space to satisfy the allocation; then unloading that space_map and repeating the process. This change modifies the space_map's to store additional information about the contiguous space in the space_map, so that we can use this information to make a better decision about which space_map to load. This requires reallocating all space_map objects to increase their bonus buffer size sizes enough to fit the new metadata. The above feature can be enabled via a new feature flag introduced by this change: com.delphix:spacemap_histogram In addition to the above, this patch allows the space_map block size to be increase. Currently the block size is set to be 4K in size, which has certain implications including the following: * 4K sector devices will not see any compression benefit * large space_maps require more metadata on-disk * large space_maps require more time to load (typically random reads) Now the space_map block size can adjust as needed up to the maximum size set via the space_map_max_blksz variable. A bug was fixed which resulted in potentially leaking an object when removing a mirrored log device. The previous logic for vdev_remove() did not deal with removing top-level vdevs that are interior vdevs (i.e. mirror) correctly. The problem would occur when removing a mirrored log device, and result in the DTL space map object being leaked; because top-level vdevs don't have DTL space map objects associated with them. References: https://www.illumos.org/issues/4101 https://www.illumos.org/issues/4102 https://www.illumos.org/issues/4103 https://www.illumos.org/issues/4105 https://www.illumos.org/issues/4106 https://github.com/illumos/illumos-gate/commit/0713e23 Porting notes: A handful of kmem_alloc() calls were converted to kmem_zalloc(). Also, the KM_PUSHPAGE and TQ_PUSHPAGE flags were used as necessary. Ported-by: Tim Chase <tim@chase2k.com> Signed-off-by: Prakash Surya <surya1@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2488
2013-10-01 21:25:53 +00:00
MODULE_PARM_DESC(metaslab_debug_load,
"load all metaslabs when pool is first opened");
module_param(metaslab_debug_unload, int, 0644);
MODULE_PARM_DESC(metaslab_debug_unload,
"prevent metaslabs from being unloaded");
module_param(metaslab_preload_enabled, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(metaslab_preload_enabled,
"preload potential metaslabs during reassessment");
module_param(zfs_mg_noalloc_threshold, int, 0644);
MODULE_PARM_DESC(zfs_mg_noalloc_threshold,
"percentage of free space for metaslab group to allow allocation");
module_param(zfs_mg_fragmentation_threshold, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(zfs_mg_fragmentation_threshold,
"fragmentation for metaslab group to allow allocation");
module_param(zfs_metaslab_fragmentation_threshold, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(zfs_metaslab_fragmentation_threshold,
"fragmentation for metaslab to allow allocation");
module_param(metaslab_fragmentation_factor_enabled, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(metaslab_fragmentation_factor_enabled,
"use the fragmentation metric to prefer less fragmented metaslabs");
module_param(metaslab_lba_weighting_enabled, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(metaslab_lba_weighting_enabled,
"prefer metaslabs with lower LBAs");
module_param(metaslab_bias_enabled, int, 0644);
Illumos 4976-4984 - metaslab improvements 4976 zfs should only avoid writing to a failing non-redundant top-level vdev 4978 ztest fails in get_metaslab_refcount() 4979 extend free space histogram to device and pool 4980 metaslabs should have a fragmentation metric 4981 remove fragmented ops vector from block allocator 4982 space_map object should proactively upgrade when feature is enabled 4983 need to collect metaslab information via mdb 4984 device selection should use fragmentation metric Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed by: Adam Leventhal <adam.leventhal@delphix.com> Reviewed by: Christopher Siden <christopher.siden@delphix.com> Approved by: Garrett D'Amore <garrett@damore.org> References: https://www.illumos.org/issues/4976 https://www.illumos.org/issues/4978 https://www.illumos.org/issues/4979 https://www.illumos.org/issues/4980 https://www.illumos.org/issues/4981 https://www.illumos.org/issues/4982 https://www.illumos.org/issues/4983 https://www.illumos.org/issues/4984 https://github.com/illumos/illumos-gate/commit/2e4c998 Notes: The "zdb -M" option has been re-tasked to display the new metaslab fragmentation metric and the new "zdb -I" option is used to control the maximum number of in-flight I/Os. The new fragmentation metric is derived from the space map histogram which has been rolled up to the vdev and pool level and is presented to the user via "zpool list". Add a number of module parameters related to the new metaslab weighting logic. Ported by: Tim Chase <tim@chase2k.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov> Closes #2595
2014-07-19 20:19:24 +00:00
MODULE_PARM_DESC(metaslab_bias_enabled,
"enable metaslab group biasing");
module_param(zfs_metaslab_segment_weight_enabled, int, 0644);
MODULE_PARM_DESC(zfs_metaslab_segment_weight_enabled,
"enable segment-based metaslab selection");
module_param(zfs_metaslab_switch_threshold, int, 0644);
MODULE_PARM_DESC(zfs_metaslab_switch_threshold,
"segment-based metaslab selection maximum buckets before switching");
#endif /* _KERNEL && HAVE_SPL */