2001-03-06 21:43:46 +00:00
|
|
|
|
/*-
|
2004-01-11 22:08:34 +00:00
|
|
|
|
* Copyright (c) 1998 - 2004 S<EFBFBD>ren Schmidt <sos@FreeBSD.org>
|
2001-03-06 21:43:46 +00:00
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer,
|
|
|
|
|
* without modification, immediately at the beginning of the file.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
2003-08-24 17:55:58 +00:00
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2001-03-06 21:43:46 +00:00
|
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/systm.h>
|
2003-03-03 11:15:32 +00:00
|
|
|
|
#include <sys/ata.h>
|
2001-03-06 21:43:46 +00:00
|
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
#include <sys/module.h>
|
|
|
|
|
#include <sys/bus.h>
|
|
|
|
|
#include <sys/malloc.h>
|
2004-01-11 22:08:34 +00:00
|
|
|
|
#include <sys/sema.h>
|
2003-08-24 09:22:26 +00:00
|
|
|
|
#include <sys/taskqueue.h>
|
2004-01-14 21:26:35 +00:00
|
|
|
|
#include <vm/uma.h>
|
2001-03-06 21:43:46 +00:00
|
|
|
|
#include <machine/stdarg.h>
|
|
|
|
|
#include <machine/resource.h>
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
#include <sys/rman.h>
|
|
|
|
|
#include <dev/ata/ata-all.h>
|
2003-10-07 04:26:14 +00:00
|
|
|
|
#include <dev/pccard/pccard_cis.h>
|
2002-01-28 13:12:16 +00:00
|
|
|
|
#include <dev/pccard/pccardreg.h>
|
|
|
|
|
#include <dev/pccard/pccardvar.h>
|
|
|
|
|
|
2004-05-27 03:49:45 +00:00
|
|
|
|
#include "pccarddevs.h"
|
|
|
|
|
|
2003-04-26 22:19:02 +00:00
|
|
|
|
static const struct pccard_product ata_pccard_products[] = {
|
2003-06-17 12:33:53 +00:00
|
|
|
|
PCMCIA_CARD(FREECOM, PCCARDIDE, 0),
|
2003-04-26 22:19:02 +00:00
|
|
|
|
PCMCIA_CARD(EXP, EXPMULTIMEDIA, 0),
|
|
|
|
|
PCMCIA_CARD(IODATA, CBIDE2, 0),
|
|
|
|
|
PCMCIA_CARD(OEM2, CDROM1, 0),
|
2003-06-03 01:30:55 +00:00
|
|
|
|
PCMCIA_CARD(OEM2, IDE, 0),
|
2003-04-26 22:19:02 +00:00
|
|
|
|
PCMCIA_CARD(PANASONIC, KXLC005, 0),
|
|
|
|
|
PCMCIA_CARD(TEAC, IDECARDII, 0),
|
|
|
|
|
{NULL}
|
|
|
|
|
};
|
|
|
|
|
|
2003-11-30 16:27:59 +00:00
|
|
|
|
MALLOC_DECLARE(M_ATA);
|
|
|
|
|
|
2002-01-28 13:12:16 +00:00
|
|
|
|
static int
|
|
|
|
|
ata_pccard_match(device_t dev)
|
|
|
|
|
{
|
2003-04-26 22:19:02 +00:00
|
|
|
|
const struct pccard_product *pp;
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
u_int32_t fcn = PCCARD_FUNCTION_UNSPEC;
|
|
|
|
|
int error = 0;
|
2002-01-28 13:12:16 +00:00
|
|
|
|
|
|
|
|
|
error = pccard_get_function(dev, &fcn);
|
|
|
|
|
if (error != 0)
|
|
|
|
|
return (error);
|
|
|
|
|
|
|
|
|
|
/* if it says its a disk we should register it */
|
|
|
|
|
if (fcn == PCCARD_FUNCTION_DISK)
|
|
|
|
|
return (0);
|
|
|
|
|
|
2003-08-24 09:22:26 +00:00
|
|
|
|
/* match other devices here, primarily cdrom/dvd rom */
|
2003-04-26 22:19:02 +00:00
|
|
|
|
if ((pp = pccard_product_lookup(dev, ata_pccard_products,
|
2003-08-25 09:01:49 +00:00
|
|
|
|
sizeof(ata_pccard_products[0]), NULL))) {
|
2003-04-26 22:19:02 +00:00
|
|
|
|
if (pp->pp_name)
|
|
|
|
|
device_set_desc(dev, pp->pp_name);
|
|
|
|
|
return (0);
|
|
|
|
|
}
|
2002-01-28 13:12:16 +00:00
|
|
|
|
return(ENXIO);
|
|
|
|
|
}
|
2001-03-06 21:43:46 +00:00
|
|
|
|
|
2004-10-06 19:46:08 +00:00
|
|
|
|
static int
|
2002-12-06 19:29:53 +00:00
|
|
|
|
ata_pccard_locknoop(struct ata_channel *ch, int type)
|
|
|
|
|
{
|
2004-10-06 19:46:08 +00:00
|
|
|
|
return 1;
|
2002-12-06 19:29:53 +00:00
|
|
|
|
}
|
|
|
|
|
|
2003-03-03 11:15:32 +00:00
|
|
|
|
static void
|
|
|
|
|
ata_pccard_setmode(struct ata_device *atadev, int mode)
|
|
|
|
|
{
|
|
|
|
|
atadev->mode = ata_limit_mode(atadev, mode, ATA_PIO_MAX);
|
|
|
|
|
}
|
|
|
|
|
|
2001-03-06 21:43:46 +00:00
|
|
|
|
static int
|
|
|
|
|
ata_pccard_probe(device_t dev)
|
|
|
|
|
{
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
struct ata_channel *ch = device_get_softc(dev);
|
2003-03-29 13:37:09 +00:00
|
|
|
|
struct resource *io, *altio;
|
2003-11-30 16:27:59 +00:00
|
|
|
|
int i, rid, len;
|
2001-03-06 21:43:46 +00:00
|
|
|
|
|
|
|
|
|
/* allocate the io range to get start and length */
|
|
|
|
|
rid = ATA_IOADDR_RID;
|
|
|
|
|
len = bus_get_resource_count(dev, SYS_RES_IOPORT, rid);
|
|
|
|
|
io = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
|
|
|
ATA_IOSIZE, RF_ACTIVE);
|
|
|
|
|
if (!io)
|
2003-03-29 13:37:09 +00:00
|
|
|
|
return ENXIO;
|
2001-03-06 21:43:46 +00:00
|
|
|
|
|
2003-03-29 13:37:09 +00:00
|
|
|
|
/* setup the resource vectors */
|
|
|
|
|
for (i = ATA_DATA; i <= ATA_STATUS; i++) {
|
|
|
|
|
ch->r_io[i].res = io;
|
|
|
|
|
ch->r_io[i].offset = i;
|
|
|
|
|
}
|
2003-11-30 16:27:59 +00:00
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* if we got more than the default ATA_IOSIZE ports, this is a device
|
|
|
|
|
* where altio is located at offset 14 into "normal" io space.
|
|
|
|
|
*/
|
|
|
|
|
if (len > ATA_IOSIZE) {
|
|
|
|
|
ch->r_io[ATA_ALTSTAT].res = io;
|
|
|
|
|
ch->r_io[ATA_ALTSTAT].offset = 14;
|
|
|
|
|
}
|
|
|
|
|
else {
|
|
|
|
|
rid = ATA_ALTADDR_RID;
|
|
|
|
|
altio = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid, 0, ~0,
|
|
|
|
|
ATA_ALTIOSIZE, RF_ACTIVE);
|
|
|
|
|
if (!altio) {
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT, ATA_IOADDR_RID, io);
|
|
|
|
|
for (i = ATA_DATA; i < ATA_MAX_RES; i++)
|
|
|
|
|
ch->r_io[i].res = NULL;
|
|
|
|
|
return ENXIO;
|
|
|
|
|
}
|
|
|
|
|
ch->r_io[ATA_ALTSTAT].res = altio;
|
|
|
|
|
ch->r_io[ATA_ALTSTAT].offset = 0;
|
|
|
|
|
}
|
2001-03-06 21:43:46 +00:00
|
|
|
|
|
2003-03-29 13:37:09 +00:00
|
|
|
|
/* initialize softc for this channel */
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
ch->unit = 0;
|
|
|
|
|
ch->flags |= (ATA_USE_16BIT | ATA_NO_SLAVE);
|
2003-02-20 20:02:32 +00:00
|
|
|
|
ch->locking = ata_pccard_locknoop;
|
2003-03-03 11:15:32 +00:00
|
|
|
|
ch->device[MASTER].setmode = ata_pccard_setmode;
|
2004-04-13 09:44:20 +00:00
|
|
|
|
ata_generic_hw(ch);
|
2001-03-06 21:43:46 +00:00
|
|
|
|
return ata_probe(dev);
|
|
|
|
|
}
|
|
|
|
|
|
2003-03-29 13:37:09 +00:00
|
|
|
|
static int
|
|
|
|
|
ata_pccard_detach(device_t dev)
|
|
|
|
|
{
|
|
|
|
|
struct ata_channel *ch = device_get_softc(dev);
|
|
|
|
|
int i;
|
|
|
|
|
|
2003-11-30 16:27:59 +00:00
|
|
|
|
free(ch->device[MASTER].param, M_ATA);
|
|
|
|
|
ch->device[MASTER].param = NULL;
|
2003-03-29 13:37:09 +00:00
|
|
|
|
ata_detach(dev);
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT,
|
|
|
|
|
ATA_ALTADDR_RID, ch->r_io[ATA_ALTSTAT].res);
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT,
|
|
|
|
|
ATA_IOADDR_RID, ch->r_io[ATA_DATA].res);
|
2003-05-12 15:26:05 +00:00
|
|
|
|
for (i = ATA_DATA; i < ATA_MAX_RES; i++)
|
2003-03-29 13:37:09 +00:00
|
|
|
|
ch->r_io[i].res = NULL;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
2001-03-06 21:43:46 +00:00
|
|
|
|
static device_method_t ata_pccard_methods[] = {
|
|
|
|
|
/* device interface */
|
2002-01-28 13:12:16 +00:00
|
|
|
|
DEVMETHOD(device_probe, pccard_compat_probe),
|
|
|
|
|
DEVMETHOD(device_attach, pccard_compat_attach),
|
2003-03-29 13:37:09 +00:00
|
|
|
|
DEVMETHOD(device_detach, ata_pccard_detach),
|
2002-01-28 13:12:16 +00:00
|
|
|
|
|
|
|
|
|
/* Card interface */
|
|
|
|
|
DEVMETHOD(card_compat_match, ata_pccard_match),
|
|
|
|
|
DEVMETHOD(card_compat_probe, ata_pccard_probe),
|
|
|
|
|
DEVMETHOD(card_compat_attach, ata_attach),
|
2001-03-06 21:43:46 +00:00
|
|
|
|
{ 0, 0 }
|
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
static driver_t ata_pccard_driver = {
|
|
|
|
|
"ata",
|
|
|
|
|
ata_pccard_methods,
|
Major update of the ATA RAID code, part 1:
Overhaul of the attach/detach code and structures, there were some nasty
bugs in the old implementation. This made it possible to collapse the
ATA/ATAPI device control structures into one generic structure.
A note here, the kernel is NOT ready for detach of active devices,
it fails all over in random places, but for inactive devices it works.
However for ATA RAID this works, since the RAID abstration layer
insulates the buggy^H^H^H^H^H^Hfragile device subsystem from the
physical disks.
Proberly detect the RAID's from the BIOS, and mark critical RAID1
arrays as such, but continue if there is enough of the mirror left
to do so.
Properly fail arrays on a live system. For RAID0 that means return EIO,
and for RAID1 it means continue on the still working part of the mirror
if possible, else return EIO.
If the state changes, log this to the console.
Allow for Promise & Highpoint controllers/arrays to coexist on the
same machine. It is not possible to distribute arrays over different
makes of controllers though.
If Promise SuperSwap enclosures are used, signal disk state on the
status LED on the front.
Misc fixes that I had lying around for various minor bugs.
Sponsored by: Advanis Inc.
2002-02-04 19:23:40 +00:00
|
|
|
|
sizeof(struct ata_channel),
|
2001-03-06 21:43:46 +00:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
DRIVER_MODULE(ata, pccard, ata_pccard_driver, ata_devclass, 0, 0);
|