freebsd-dev/sys/mips/conf/TL-WDR4300

53 lines
1.2 KiB
Plaintext
Raw Normal View History

#
# TPLink TL-WDR4300 - AR9344 based dual-band 2x2 wifi
#
# $FreeBSD$
#
# Include the default AR934x parameters
include "AR934X_BASE"
ident TL-WDR4300
# Override hints with board values
hints "TL-WDR4300.hints"
# Force the board memory - the base DB120 has 128MB RAM
options AR71XX_REALMEM=(128*1024*1024)
# i2c GPIO bus
#device gpioiic
#device iicbb
#device iicbus
#device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
options MSDOSFS
# Enable the uboot environment stuff rather then the
# redboot stuff.
options AR71XX_ENV_UBOOT
# uzip - to boot natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
# Used for the static uboot partition map
device geom_map
# yes, this board has a PCI connected atheros device
device ath_pci
options AR71XX_ATH_EEPROM
device firmware # Used by the above
options ATH_EEPROM_FIRMWARE
# Boot off of the rootfs, as defined in the geom_map setup.
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"