freebsd-dev/sbin/init/ttys.powerpc

#
# $FreeBSD$
#	@(#)ttys	5.1 (Berkeley) 4/17/89
#
# This file specifies various information about terminals on the system.
# It is used by several different programs.  Common entries for the
# various columns include:
#
# name  The name of the terminal device.
#
# getty The program to start running on the terminal.  Typically a
#       getty program, as the name implies.  Other common entries
#       include none, when no getty is needed, and xdm, to start the
#       X Window System.
#
# type The initial terminal type for this port.  For hardwired
#      terminal lines, this will contain the type of terminal used.
#      For virtual consoles, the correct type is typically xterm.
#      Other common values include dialup for incoming modem ports, and
#      unknown when the terminal type cannot be predetermined.
#
# status Must be on or off.  If on, init will run the getty program on
#        the specified port.  If the word "secure" appears, this tty
#        allows root login.
#
# name	getty				type	status		comments
#
# If console is marked "insecure", then init will ask for the root password
# when going to single-user mode.
console	none				unknown	off secure
#
ttyv0	"/usr/libexec/getty Pc"		xterm	onifexists secure
# Virtual terminals
ttyv1	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv2	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv3	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv4	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv5	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv6	"/usr/libexec/getty Pc"		xterm	onifexists secure
ttyv7	"/usr/libexec/getty Pc"		xterm	onifexists secure
#ttyv8	"/usr/local/bin/xdm -nodaemon"	xterm	off secure
# Serial terminals
# The 'dialup' keyword identifies dialin lines to login, fingerd etc.
ttyu0	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu1	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu2	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
ttyu3	"/usr/libexec/getty 3wire"	vt100	onifconsole secure
# Dumb console
dcons	"/usr/libexec/getty std.9600"	vt100	off secure
PowerPC ttys file. 2004-02-04 01:44:34 +00:00			`#`
			`# $FreeBSD$`
			`# @(#)ttys 5.1 (Berkeley) 4/17/89`
			`#`
			`# This file specifies various information about terminals on the system.`
			`# It is used by several different programs. Common entries for the`
			`# various columns include:`
			`#`
			`# name The name of the terminal device.`
			`#`
			`# getty The program to start running on the terminal. Typically a`
			`# getty program, as the name implies. Other common entries`
			`# include none, when no getty is needed, and xdm, to start the`
			`# X Window System.`
			`#`
			`# type The initial terminal type for this port. For hardwired`
			`# terminal lines, this will contain the type of terminal used.`
Switch the default terminal emulation style to xterm for most platforms. Right now syscons(4) uses a cons25-style terminal emulator. The disadvantages of that are: - Little compatibility with embedded devices with serial interfaces. - Bad bandwidth efficiency, mainly because of the lack of scrolling regions. - A very hard transition path to support for modern character sets like UTF-8. Our terminal emulation library, libteken, has been supporting xterm-style terminal emulation for months, so flip the switch and make everyone use an xterm-style console driver. I still have to enable this on i386. Right now pc98 and i386 share the same /etc/ttys file. I'm not going to switch pc98, because it uses its own Kanji-capable cons25 emulator. IMPORTANT: What to do if things go wrong (i.e. graphical artifacts): - Run the application inside script(1), try to reduce the problem and send me the log file. - In the mean time, you can run `vidcontrol -T cons25' and `export TERM=cons25' so you can run applications the same way you did before. You can also build your kernel with `options TEKEN_CONS25' to make all virtual terminals use the cons25 emulator by default. Discussed on: current@ 2009-11-13 05:54:55 +00:00			`# For virtual consoles, the correct type is typically xterm.`
Remove the reference to pseudo-terminals from the description. Pseudo-terminals are no longer listed in this file, since the utmpx implementation doesn't depend on ttyslot(). 2011-03-30 08:22:29 +00:00			`# Other common values include dialup for incoming modem ports, and`
			`# unknown when the terminal type cannot be predetermined.`
PowerPC ttys file. 2004-02-04 01:44:34 +00:00			`#`
			`# status Must be on or off. If on, init will run the getty program on`
			`# the specified port. If the word "secure" appears, this tty`
			`# allows root login.`
			`#`
			`# name getty type status comments`
			`#`
			`# If console is marked "insecure", then init will ask for the root password`
			`# when going to single-user mode.`
			`console none unknown off secure`
			`#`
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169 2018-05-09 20:49:00 +00:00			`ttyv0 "/usr/libexec/getty Pc" xterm onifexists secure`
PowerPC ttys file. 2004-02-04 01:44:34 +00:00			`# Virtual terminals`
For video consoles, only launch a getty if the device exists. Differential Revision: https://reviews.freebsd.org/D15169 2018-05-09 20:49:00 +00:00			`ttyv1 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv2 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv3 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv4 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv5 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv6 "/usr/libexec/getty Pc" xterm onifexists secure`
			`ttyv7 "/usr/libexec/getty Pc" xterm onifexists secure`
Remove more vestiges of /usr/X11R6, but leave mtree for portmgr. 2007-05-29 06:37:58 +00:00			`#ttyv8 "/usr/local/bin/xdm -nodaemon" xterm off secure`
PowerPC ttys file. 2004-02-04 01:44:34 +00:00			`# Serial terminals`
			`# The 'dialup' keyword identifies dialin lines to login, fingerd etc.`
Enable all callin ttys if the tty is an available console. Discussed on: -arch@ (no objections) MFC after: 1 week Sponsored by: The FreeBSD Foundation 2015-10-20 16:10:46 +00:00			`ttyu0 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
			`ttyu1 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
			`ttyu2 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
			`ttyu3 "/usr/libexec/getty 3wire" vt100 onifconsole secure`
PowerPC ttys file. 2004-02-04 01:44:34 +00:00			`# Dumb console`
			`dcons "/usr/libexec/getty std.9600" vt100 off secure`