freebsd-dev/sys/modules/ipmi/Makefile

# $FreeBSD$

.PATH: ${.CURDIR}/../../dev/ipmi

# XXX - ipmi_smbus and ipmi_ssif depend on smbus
# XXX - ipmi_acpi depends on acpi
KMOD=	ipmi
SRCS=	ipmi.c ipmi_kcs.c ipmi_smic.c ipmi_smbios.c ipmi_ssif.c
SRCS+=	ipmi_acpi.c ipmi_isa.c ipmi_pci.c ipmi_smbus.c
SRCS+=	opt_acpi.h
SRCS+=	acpi_if.h bus_if.h device_if.h isa_if.h pci_if.h smbus_if.h

.include <bsd.kmod.mk>
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux 2006-02-10 20:51:35 +00:00			`# $FreeBSD$`

			`.PATH: ${.CURDIR}/../../dev/ipmi`

Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days 2006-09-22 22:11:29 +00:00			`# XXX - ipmi_smbus and ipmi_ssif depend on smbus`
			`# XXX - ipmi_acpi depends on acpi`
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux 2006-02-10 20:51:35 +00:00			`KMOD= ipmi`
Update the ipmi(4) driver: - Split out the communication protocols into their own files and use a couple of function pointers in the softc that the commuication protocols setup in their own attach routine. - Add support for the SSIF interface (talking to IPMI over SMBus). - Add an ACPI attachment. - Add a PCI attachment that attaches to devices with the IPMI interface subclass. - Split the ISA attachment out into its own file: ipmi_isa.c. - Change the code to probe the SMBIOS table for an IPMI entry to just use pmap_mapbios() to map the table in rather than trying to setup a fake resource on an isa device and then activating the resource to map in the table. - Make bus attachments leaner by adding attach functions for each communication interface (ipmi_kcs_attach(), ipmi_smic_attach(), etc.) that setup per-interface data. - Formalize the model used by the driver to handle requests by adding an explicit struct ipmi_request object that holds the state of a given request and reply for the entire lifetime of the request. By bundling the request into an object, it is easier to add retry logic to the various communication backends (as well as eventually support BT mode which uses a slightly different message format than KCS, SMIC, and SSIF). - Add a per-softc lock and remove D_NEEDGIANT as the driver is now MPSAFE. - Add 32-bit compatibility ioctl shims so you can use a 32-bit ipmitool on FreeBSD/amd64. - Add ipmi(4) to i386 and amd64 NOTES. Submitted by: ambrisko (large portions of 2 and 3) Sponsored by: IronPort Systems, Yahoo! MFC after: 6 days 2006-09-22 22:11:29 +00:00			`SRCS= ipmi.c ipmi_kcs.c ipmi_smic.c ipmi_smbios.c ipmi_ssif.c`
			`SRCS+= ipmi_acpi.c ipmi_isa.c ipmi_pci.c ipmi_smbus.c`
			`SRCS+= opt_acpi.h`
			`SRCS+= acpi_if.h bus_if.h device_if.h isa_if.h pci_if.h smbus_if.h`
Add an OpenIPMI mostly compatible driver. This driver was developed to work with ipmitools. It works with other tools that have an OpenIPMI driver interface. The port will need to get updated to used this. I have not implemented the IPMB mode yet so ioctl's for that don't really do much otherwise it should work like the OpenIPMI version. The ipmi.h definitions was derived from the ipmitool header file. The bus attachments are done for smbios and pci/smbios. Differences in bus probe order for modules/static are delt with. ACPI attachment should be done. This drivers registers with the watchdod(4) interface Work to do: - BT interface - IPMB mode This has been tested on Dell PE2850, PE2650 & PE850 with i386 & amd64 kernel. I will link this into the build on next week. Tom Rhodes, helped me with the man page. Sponsored by: IronPort Systems Inc. Inspired from: ipmitool & Linux 2006-02-10 20:51:35 +00:00
			`.include <bsd.kmod.mk>`