freebsd-dev/sys/dev/mps/mps_mapping.h

77 lines
2.7 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2015 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*
* $FreeBSD$
*/
#ifndef _MPS_MAPPING_H
#define _MPS_MAPPING_H
/**
* struct _map_phy_change - PHY entries received in Topology change list
* @physical_id: SAS address of the device attached with the associate PHY
* @device_info: bitfield provides detailed info about the device
* @dev_handle: device handle for the device pointed by this entry
* @slot: slot ID
* @is_processed: Flag to indicate whether this entry is processed or not
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
* @is_SATA_SSD: 1 if this is a SATA device AND an SSD, 0 otherwise
*/
struct _map_phy_change {
uint64_t physical_id;
uint32_t device_info;
uint16_t dev_handle;
uint16_t slot;
uint8_t reason;
uint8_t is_processed;
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
uint8_t is_SATA_SSD;
uint8_t reserved;
};
/**
* struct _map_topology_change - entries to be removed from mapping table
* @dpm_entry_num: index of this device in device persistent map table
* @dev_handle: device handle for the device pointed by this entry
*/
struct _map_topology_change {
uint16_t enc_handle;
uint16_t exp_handle;
uint8_t num_entries;
uint8_t start_phy_num;
uint8_t num_phys;
uint8_t exp_status;
struct _map_phy_change *phy_details;
};
extern int
mpssas_get_sas_address_for_sata_disk(struct mps_softc *ioc,
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 20.00.00.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 2 weeks
2015-02-24 22:07:42 +00:00
u64 *sas_address, u16 handle, u32 device_info, u8 *is_SATA_SSD);
#endif