d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
ea4313e351
freebsd-dev/sys/pci/if_wx.c

2463 lines
57 KiB
C
Raw Normal View History

Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
/* $FreeBSD$ */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
* Principal Author: Matthew Jacob
* Copyright (c) 1999, 2001 by Traakan Software
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
* Additional Copyright (c) 2001 by Parag Patel
* under same licence for MII PHY code.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
/*
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
* Intel Gigabit Ethernet (82452/82453) Driver.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
* Inspired by fxp driver by David Greenman for FreeBSD, and by
* Bill Paul's work in other FreeBSD network drivers.
*/
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
/*
* Options
*/
/*
* Use only every other 16 byte receive descriptor, leaving the ones
* in between empty. This card is most efficient at reading/writing
* 32 byte cache lines, so avoid all the (not working for early rev
* cards) MWI and/or READ/MODIFY/WRITE cycles updating one descriptor
* would have you do.
*
* This isn't debugged yet.
*/
/* #define PADDED_CELL 1 */
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
/*
* Enable JumboGrams. This seems to work.
*/
/* #define WX_JUMBO 1 */
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Since the includes are a mess, they'll all be in if_wxvar.h
*/
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if defined(__NetBSD__) || defined(__OpenBSD__)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#include <dev/pci/if_wxvar.h>
#elif defined(__FreeBSD__)
#include <pci/if_wxvar.h>
#endif
#ifdef __alpha__
#undef vtophys
#define vtophys(va) alpha_XXX_dmamap((vm_offset_t)(va))
#endif /* __alpha__ */
/*
* Function Prototpes, yadda yadda...
*/
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static int wx_intr(void *);
static void wx_handle_link_intr(wx_softc_t *);
static void wx_check_link(wx_softc_t *);
static void wx_handle_rxint(wx_softc_t *);
static void wx_gc(wx_softc_t *);
static void wx_start(struct ifnet *);
static int wx_ioctl(struct ifnet *, IOCTL_CMD_TYPE, caddr_t);
static int wx_ifmedia_upd(struct ifnet *);
static void wx_ifmedia_sts(struct ifnet *, struct ifmediareq *);
static int wx_init(void *);
static void wx_hw_stop(wx_softc_t *);
static void wx_set_addr(wx_softc_t *, int, u_int8_t *);
static int wx_hw_initialize(wx_softc_t *);
static void wx_stop(wx_softc_t *);
static void wx_txwatchdog(struct ifnet *);
static int wx_get_rbuf(wx_softc_t *, rxpkt_t *);
static void wx_rxdma_map(wx_softc_t *, rxpkt_t *, struct mbuf *);
static INLINE void wx_eeprom_raise_clk(wx_softc_t *, u_int32_t);
static INLINE void wx_eeprom_lower_clk(wx_softc_t *, u_int32_t);
static INLINE void wx_eeprom_sobits(wx_softc_t *, u_int16_t, u_int16_t);
static INLINE u_int16_t wx_eeprom_sibits(wx_softc_t *);
static INLINE void wx_eeprom_cleanup(wx_softc_t *);
static INLINE u_int16_t wx_read_eeprom_word(wx_softc_t *, int);
static void wx_read_eeprom(wx_softc_t *, u_int16_t *, int, int);
static int wx_attach_common(wx_softc_t *);
static void wx_watchdog(void *);
static INLINE void wx_mwi_whackon(wx_softc_t *);
static INLINE void wx_mwi_unwhack(wx_softc_t *);
static int wx_dring_setup(wx_softc_t *);
static void wx_dring_teardown(wx_softc_t *);
static int wx_attach_phy(wx_softc_t *);
static int wx_miibus_readreg(void *, int, int);
static int wx_miibus_writereg(void *, int, int, int);
static void wx_miibus_statchg(void *);
static void wx_miibus_mediainit(void *);
static u_int32_t wx_mii_shift_in(wx_softc_t *);
static void wx_mii_shift_out(wx_softc_t *, u_int32_t, u_int32_t);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define WX_DISABLE_INT(sc) WRITE_CSR(sc, WXREG_IMCLR, WXDISABLE)
#define WX_ENABLE_INT(sc) WRITE_CSR(sc, WXREG_IMASK, sc->wx_ienable)
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
#define JUMBOMTU (WX_MAX_PKT_SIZE_JUMBO - sizeof (struct ether_header))
#ifdef WX_JUMBO
#define WX_MAXMTU JUMBOMTU
#else
#define WX_MAXMTU ETHERMTU
#endif
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
#define DPRINTF(sc, x) if (sc->wx_debug) printf x
#define IPRINTF(sc, x) if (sc->wx_verbose) printf x
static const char ldn[] = "%s: link down\n";
static const char lup[] = "%s: link up\n";
static const char sqe[] = "%s: receive sequence error\n";
static const char ane[] = "%s: /C/ ordered sets seen- enabling ANE\n";
static const char inane[] = "%s: no /C/ ordered sets seen- disabling ANE\n";
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if defined(__NetBSD__) || defined(__OpenBSD__)
#if defined(__BROKEN_INDIRECT_CONFIG) || defined(__OpenBSD__)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define MATCHARG void *
#else
#define MATCHARG struct cfdata *
#endif
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static int wx_match(struct device *, MATCHARG, void *);
static void wx_attach(struct device *, struct device *, void *);
static void wx_shutdown(void *);
static int wx_ether_ioctl(struct ifnet *, IOCTL_CMD_TYPE, caddr_t);
static int wx_mc_setup(wx_softc_t *);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#define ether_ioctl wx_ether_ioctl
/*
* Life *should* be simple- we only read/write 32 bit values in registers.
* Unfortunately, some platforms define bus_space functions in a fashion
* such that they cannot be used as part of a for loop, for example.
*/
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static INLINE u_int32_t _read_csr (wx_softc_t *, u_int32_t);
static INLINE void _write_csr(wx_softc_t *, u_int32_t, u_int32_t);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static INLINE u_int32_t
_read_csr(wx_softc_ *sc, u_int32_t reg)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
return bus_space_read_4(sc->w.st, sc->w.sh, reg);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static INLINE void
_write_csr(wx_softc_t *sc, u_int32_t reg, u_int32_t val)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
bus_space_write_4(sc->w.st, sc->w.sh, reg, val);
}
struct cfattach wx_ca = {
sizeof (wx_softc_t), wx_match, wx_attach
};
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#ifdef __OpenBSD__
struct cfdriver wx_cd = {
0, "wx", DV_IFNET
};
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Check if a device is an 82452.
*/
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_match(struct device *parent, MATCHARG match, void *aux)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct pci_attach_args *pa = aux;
if (PCI_VENDOR(pa->pa_id) != WX_VENDOR_INTEL) {
return (0);
}
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
switch (PCI_PRODUCT(pa->pa_id)) {
case WX_PRODUCT_82452:
case WX_PRODUCT_LIVENGOOD:
case WX_PRODUCT_82452_SC:
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
case WX_PRODUCT_82543:
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
break;
default:
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (0);
}
return (1);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_attach(struct device *parent, struct devuce *self, void *aux)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_softc_t *sc = (wx_softc_t *)self;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
struct pci_attach_args *pa = aux;
pci_chipset_tag_t pc = pa->pa_pc;
pci_intr_handle_t ih;
const char *intrstr = NULL;
u_int32_t data;
struct ifnet *ifp;
sc->w.pci_pc = pa->pa_pc;
sc->w.pci_tag = pa->pa_tag;
/*
* Map control/status registers.
*/
if (pci_mapreg_map(pa, WX_MMBA, PCI_MAPREG_TYPE_MEM, 0,
&sc->w.st, &sc->w.sh, NULL, NULL)) {
printf(": can't map registers\n");
return;
}
printf(": Intel GigaBit Ethernet\n");
/*
* Allocate our interrupt.
*/
if (pci_intr_map(pc, pa->pa_intrtag, pa->pa_intrpin,
pa->pa_intrline, &ih)) {
printf("%s: couldn't map interrupt\n", sc->wx_name);
return;
}
intrstr = pci_intr_string(pc, ih);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if defined(__OpenBSD__)
sc->w.ih = pci_intr_establish(pc, ih, IPL_NET, wx_intr, sc,
self->dv_xname);
#else
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->w.ih = pci_intr_establish(pc, ih, IPL_NET, wx_intr, sc);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (sc->w.ih == NULL) {
printf("%s: couldn't establish interrupt", sc->wx_name);
if (intrstr != NULL)
printf(" at %s", intrstr);
printf("\n");
return;
}
printf("%s: interrupting at %s\n", sc->wx_name, intrstr);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
sc->wx_idnrev = (PCI_PRODUCT(pa->pa_id) << 16) |
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
(pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_CLASS_REG) & 0xff);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
data = pci_conf_read(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG);
data &= ~(PCI_CACHELINE_MASK << PCI_CACHELINE_SHIFT);
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
data |= (WX_CACHELINE_SIZE << PCI_CACHELINE_SHIFT);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
pci_conf_write(pa->pa_pc, pa->pa_tag, PCI_BHLC_REG, data);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
#if defined(__NetBSD__)
if (bootverbose)
sc->wx_verbose = 1;
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (wx_attach_common(sc)) {
return;
}
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: Ethernet address %s\n",
sc->wx_name, ether_sprintf(sc->wx_enaddr));
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
ifp = &sc->wx_if;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
bcopy(sc->wx_name, ifp->if_xname, IFNAMSIZ);
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
ifp->if_mtu = WX_MAXMTU;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = wx_ioctl;
ifp->if_start = wx_start;
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
ifp->if_watchdog = wx_txwatchdog;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Attach the interface.
*/
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
if_attach(ifp);
#ifdef __OpenBSD__
ether_ifattach(ifp);
#else
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ether_ifattach(ifp, sc->wx_enaddr);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#endif
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if NBPFILTER > 0
bpfattach(&ifp->if_bpf, ifp, DLT_EN10MB,
sizeof (struct ether_header));
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Add shutdown hook so that DMA is disabled prior to reboot. Not
* doing do could allow DMA to corrupt kernel memory during the
* reboot before the driver initializes.
*/
shutdownhook_establish(wx_shutdown, sc);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static int
wx_attach_phy(wx_softc_t *sc)
{
if (mii_phy_probe(dev, &sc->wx_miibus, wx_ifmedia_upd,
wx_ifmedia_sts)) {
printf("%s: no PHY probed!\n", sc->wx_name);
return (-1);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
sc->wx_mii = device_get_softc(sc->w.miibus);
return 0;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
/*
* Device shutdown routine. Called at system shutdown after sync. The
* main purpose of this routine is to shut off receiver DMA so that
* kernel memory doesn't get clobbered during warmboot.
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_shutdown(void *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_hw_stop((wx_softc_t *) sc);
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_ether_ioctl(struct ifnet *ifp, IOCTL_CMD_TYPE cmd, caddr_t data)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct ifaddr *ifa = (struct ifaddr *) data;
int error = 0;
wx_softc_t *sc = SOFTC_IFP(ifp);
switch (cmd) {
case SIOCSIFADDR:
ifp->if_flags |= IFF_UP;
error = wx_init(sc);
if (error) {
ifp->if_flags &= ~IFF_UP;
break;
}
switch (ifa->ifa_addr->sa_family) {
#ifdef INET
case AF_INET:
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#ifdef __OpenBSD__
arp_ifinit(&sc->w.arpcom, ifa);
#else
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
arp_ifinit(ifp, ifa);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
break;
#endif
#ifdef NS
case AF_NS:
{
register struct ns_addr *ina = &IA_SNS(ifa)->sns_addr;
if (ns_nullhost(*ina))
ina->x_host = *(union ns_host *)
LLADDR(ifp->if_sadl);
else
bcopy(ina->x_host.c_host, LLADDR(ifp->if_sadl),
ifp->if_addrlen);
break;
}
#endif
default:
break;
}
break;
default:
error = EINVAL;
break;
}
return (0);
}
/*
* Program multicast addresses.
*
* This function must be called at splimp, but it may sleep.
*/
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mc_setup(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct ifnet *ifp = &sc->wx_if;
struct ether_multistep step;
struct ether_multi *enm;
/*
* XXX: drain TX queue- use a tsleep/wakeup until done.
*/
if (sc->tactive) {
return (EBUSY);
}
wx_stop(sc);
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
sc->all_mcasts = 1;
return (wx_init(sc));
}
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#ifdef __OpenBSD__
ETHER_FIRST_MULTI(step, &sc->w.arpcom, enm);
#else
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ETHER_FIRST_MULTI(step, &sc->w.ethercom, enm);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
while (enm != NULL) {
if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 6) != 0)
continue;
if (sc->wx_nmca >= WX_RAL_TAB_SIZE-1) {
sc->wx_nmca = 0;
sc->all_mcasts = 1;
break;
}
bcopy(enm->enm_addrlo,
(void *) &sc->wx_mcaddr[sc->wx_nmca++][0], 6);
ETHER_NEXT_MULTI(step, enm);
}
return (wx_init(sc));
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mwi_whackon(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
sc->wx_cmdw =
pci_conf_read(sc->w.pci_pc, sc->w.pci_tag, PCI_COMMAND_STATUS_REG);
pci_conf_write(sc->w.pci_pc, sc->w.pci_tag,
PCI_COMMAND_STATUS_REG, sc->wx_cmdw & ~MWI);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mwi_unwhack(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
if (sc->wx_cmdw & MWI) {
pci_conf_write(sc->w.pci_pc, sc->w.pci_tag,
PCI_COMMAND_STATUS_REG, sc->wx_cmdw & ~MWI);
}
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_dring_setup(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
size_t len;
len = sizeof (wxrd_t) * WX_MAX_RDESC;
if (len > NBPG) {
printf("%s: len (%lx) over a page for the receive ring\n",
sc->wx_name, len);
return (-1);
}
len = NBPG;
sc->rdescriptors = (wxrd_t *) WXMALLOC(len);
if (sc->rdescriptors == NULL) {
printf("%s: could not allocate rcv descriptors\n", sc->wx_name);
return (-1);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (((intptr_t)sc->rdescriptors) & 0xfff) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: rcv descriptors not 4KB aligned\n", sc->wx_name);
return (-1);
}
bzero(sc->rdescriptors, len);
len = sizeof (wxtd_t) * WX_MAX_TDESC;
if (len > NBPG) {
printf("%s: len (%lx) over a page for the xmit ring\n",
sc->wx_name, len);
return (-1);
}
len = NBPG;
sc->tdescriptors = (wxtd_t *) WXMALLOC(len);
if (sc->tdescriptors == NULL) {
printf("%s: could not allocate xmt descriptors\n", sc->wx_name);
return (-1);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (((intptr_t)sc->tdescriptors) & 0xfff) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: xmt descriptors not 4KB aligned\n", sc->wx_name);
return (-1);
}
bzero(sc->tdescriptors, len);
return (0);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_dring_teardown(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
if (sc->rdescriptors) {
WXFREE(sc->rdescriptors);
sc->rdescriptors = NULL;
}
if (sc->tdescriptors) {
WXFREE(sc->tdescriptors);
sc->tdescriptors = NULL;
}
}
#elif defined(__FreeBSD__)
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static int wx_mc_setup(wx_softc_t *);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Program multicast addresses.
*
* This function must be called at splimp, but it may sleep.
*/
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mc_setup(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct ifnet *ifp = &sc->wx_if;
struct ifmultiaddr *ifma;
/*
* XXX: drain TX queue- use a tsleep/wakeup until done.
*/
if (sc->tactive) {
return (EBUSY);
}
wx_stop(sc);
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
sc->all_mcasts = 1;
return (wx_init(sc));
}
Use <sys/queue.h> macro API.
2001-02-04 12:37:48 +00:00
sc->wx_nmca = 0;
Convert if_multiaddrs from LIST to TAILQ so that it can be traversed backwards in the three drivers which want to do that. Reviewed by: mikeh
2001-02-06 10:12:15 +00:00
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (ifma->ifma_addr->sa_family != AF_LINK) {
continue;
}
if (sc->wx_nmca >= WX_RAL_TAB_SIZE-1) {
sc->wx_nmca = 0;
sc->all_mcasts = 1;
break;
}
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
(void *) &sc->wx_mcaddr[sc->wx_nmca++][0], 6);
}
return (wx_init(sc));
}
/*
* Return identification string if this is device is ours.
*/
static int
wx_probe(device_t dev)
{
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (pci_get_vendor(dev) != WX_VENDOR_INTEL) {
return (ENXIO);
}
switch (pci_get_device(dev)) {
case WX_PRODUCT_82452:
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
device_set_desc(dev, "Intel PRO/1000 Gigabit (WISEMAN)");
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
break;
case WX_PRODUCT_LIVENGOOD:
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
device_set_desc(dev, "Intel PRO/1000 (LIVENGOOD)");
break;
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
case WX_PRODUCT_82452_SC:
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
device_set_desc(dev, "Intel PRO/1000 F Gigabit Ethernet");
break;
case WX_PRODUCT_82543:
device_set_desc(dev, "Intel PRO/1000 T Gigabit Ethernet");
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
break;
default:
return (ENXIO);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
return (0);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
static int
wx_attach(device_t dev)
{
int error = 0;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_softc_t *sc = device_get_softc(dev);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
struct ifnet *ifp;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
u_int32_t val;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
int rid;
bzero(sc, sizeof (wx_softc_t));
callout_handle_init(&sc->w.sch);
sc->w.dev = dev;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (bootverbose)
sc->wx_verbose = 1;
if (getenv_int ("wx_debug", &rid)) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (rid & (1 << device_get_unit(dev))) {
sc->wx_debug = 1;
}
}
if (getenv_int("wx_no_ilos", &rid)) {
if (rid & (1 << device_get_unit(dev))) {
sc->wx_no_ilos = 1;
}
}
if (getenv_int("wx_ilos", &rid)) {
if (rid & (1 << device_get_unit(dev))) {
sc->wx_ilos = 1;
}
}
if (getenv_int("wx_no_flow", &rid)) {
if (rid & (1 << device_get_unit(dev))) {
sc->wx_no_flow = 1;
}
}
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#ifdef SMPNG
Implement MTX_RECURSE flag for mtx_init(). All calls to mtx_init() for mutexes that recurse must now include the MTX_RECURSE bit in the flag argument variable. This change is in preparation for an upcoming (further) mutex API cleanup. The witness code will call panic() if a lock is found to recurse but the MTX_RECURSE bit was not set during the lock's initialization. The old MTX_RECURSE "state" bit (in mtx_lock) has been renamed to MTX_RECURSED, which is more appropriate given its meaning. The following locks have been made "recursive," thus far: eventhandler, Giant, callout, sched_lock, possibly some others declared in the architecture-specific code, all of the network card driver locks in pci/, as well as some other locks in dev/ stuff that I've found to be recursive. Reviewed by: jhb
2001-01-19 01:59:14 +00:00
mtx_init(&sc->wx_mtx, device_get_nameunit(dev), MTX_DEF | MTX_RECURSE);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#endif
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
/*
* get revision && id...
*/
sc->wx_idnrev = (pci_get_device(dev) << 16) | (pci_get_revid(dev));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Enable bus mastering, make sure that the cache line size is right.
*/
val = pci_read_config(dev, PCIR_COMMAND, 2);
val |= (PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
pci_write_config(dev, PCIR_COMMAND, val, 2);
val = pci_read_config(dev, PCIR_CACHELNSZ, 1);
if (val != 0x10) {
pci_write_config(dev, PCIR_CACHELNSZ, 0x10, 1);
}
/*
* Map control/status registers.
*/
rid = WX_MMBA;
sc->w.mem = bus_alloc_resource(dev, SYS_RES_MEMORY,
&rid, 0, ~0, 1, RF_ACTIVE);
if (!sc->w.mem) {
device_printf(dev, "could not map memory\n");
error = ENXIO;
goto out;
}
sc->w.st = rman_get_bustag(sc->w.mem);
sc->w.sh = rman_get_bushandle(sc->w.mem);
rid = 0;
sc->w.irq = bus_alloc_resource(dev, SYS_RES_IRQ,
&rid, 0, ~0, 1, RF_SHAREABLE | RF_ACTIVE);
if (sc->w.irq == NULL) {
device_printf(dev, "could not map interrupt\n");
error = ENXIO;
goto out;
}
error = bus_setup_intr(dev, sc->w.irq, INTR_TYPE_NET,
(void (*)(void *))wx_intr, sc, &sc->w.ih);
if (error) {
device_printf(dev, "could not setup irq\n");
goto out;
}
if (wx_attach_common(sc)) {
bus_teardown_intr(dev, sc->w.irq, sc->w.ih);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->w.irq);
bus_release_resource(dev, SYS_RES_MEMORY, WX_MMBA, sc->w.mem);
error = ENXIO;
goto out;
}
device_printf(dev, "Ethernet address %02x:%02x:%02x:%02x:%02x:%02x\n",
sc->w.arpcom.ac_enaddr[0], sc->w.arpcom.ac_enaddr[1],
sc->w.arpcom.ac_enaddr[2], sc->w.arpcom.ac_enaddr[3],
sc->w.arpcom.ac_enaddr[4], sc->w.arpcom.ac_enaddr[5]);
(void) snprintf(sc->wx_name, sizeof (sc->wx_name) - 1, "wx%d",
device_get_unit(dev));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp = &sc->w.arpcom.ac_if;
ifp->if_unit = device_get_unit(dev);
ifp->if_name = "wx";
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
ifp->if_mtu = WX_MAXMTU;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp->if_output = ether_output;
ifp->if_baudrate = 1000000000;
ifp->if_init = (void (*)(void *))wx_init;
ifp->if_softc = sc;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
ifp->if_ioctl = wx_ioctl;
ifp->if_start = wx_start;
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
ifp->if_watchdog = wx_txwatchdog;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp->if_snd.ifq_maxlen = WX_MAX_TDESC - 1;
Make all Ethernet drivers attach using ether_ifattach() and detach using ether_ifdetach(). The former consolidates the operations of if_attach(), ng_ether_attach(), and bpfattach(). The latter consolidates the corresponding detach operations. Reviewed by: julian, freebsd-net
2000-07-13 22:54:34 +00:00
ether_ifattach(ifp, ETHER_BPF_SUPPORTED);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
out:
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (error);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
static int
wx_attach_phy(wx_softc_t *sc)
{
if (mii_phy_probe(sc->w.dev, &sc->w.miibus, wx_ifmedia_upd,
wx_ifmedia_sts)) {
printf("%s: no PHY probed!\n", sc->wx_name);
return (-1);
}
sc->wx_mii = device_get_softc(sc->w.miibus);
return 0;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
static int
wx_detach(device_t dev)
{
wx_softc_t *sc = device_get_softc(dev);
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Make all Ethernet drivers attach using ether_ifattach() and detach using ether_ifdetach(). The former consolidates the operations of if_attach(), ng_ether_attach(), and bpfattach(). The latter consolidates the corresponding detach operations. Reviewed by: julian, freebsd-net
2000-07-13 22:54:34 +00:00
ether_ifdetach(&sc->w.arpcom.ac_if, ETHER_BPF_SUPPORTED);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_stop(sc);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
bus_generic_detach(dev);
device_delete_child(dev, sc->w.miibus);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
bus_teardown_intr(dev, sc->w.irq, sc->w.ih);
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->w.irq);
bus_release_resource(dev, SYS_RES_MEMORY, WX_MMBA, sc->w.mem);
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (0);
}
static int
wx_shutdown(device_t dev)
{
wx_hw_stop((wx_softc_t *) device_get_softc(dev));
return (0);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mwi_whackon(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
sc->wx_cmdw = pci_read_config(sc->w.dev, PCIR_COMMAND, 2);
pci_write_config(sc->w.dev, PCIR_COMMAND, sc->wx_cmdw & ~MWI, 2);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_mwi_unwhack(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
if (sc->wx_cmdw & MWI) {
pci_write_config(sc->w.dev, PCIR_COMMAND, sc->wx_cmdw, 2);
}
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_dring_setup(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
size_t len;
len = sizeof (wxrd_t) * WX_MAX_RDESC;
sc->rdescriptors = (wxrd_t *)
contigmalloc(len, M_DEVBUF, M_NOWAIT, 0, ~0, 4096, 0);
if (sc->rdescriptors == NULL) {
printf("%s: could not allocate rcv descriptors\n", sc->wx_name);
return (-1);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (((intptr_t)sc->rdescriptors) & 0xfff) {
Thanks for Andrew Gallatin pointing out that freeing contigmalloc'd items via free is bad.
2000-07-09 00:18:21 +00:00
contigfree(sc->rdescriptors, len, M_DEVBUF);
sc->rdescriptors = NULL;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: rcv descriptors not 4KB aligned\n", sc->wx_name);
return (-1);
}
bzero(sc->rdescriptors, len);
len = sizeof (wxtd_t) * WX_MAX_TDESC;
sc->tdescriptors = (wxtd_t *)
contigmalloc(len, M_DEVBUF, M_NOWAIT, 0, ~0, 4096, 0);
if (sc->tdescriptors == NULL) {
Thanks for Andrew Gallatin pointing out that freeing contigmalloc'd items via free is bad.
2000-07-09 00:18:21 +00:00
contigfree(sc->rdescriptors,
sizeof (wxrd_t) * WX_MAX_RDESC, M_DEVBUF);
sc->rdescriptors = NULL;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: could not allocate xmt descriptors\n", sc->wx_name);
return (-1);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (((intptr_t)sc->tdescriptors) & 0xfff) {
Thanks for Andrew Gallatin pointing out that freeing contigmalloc'd items via free is bad.
2000-07-09 00:18:21 +00:00
contigfree(sc->rdescriptors,
sizeof (wxrd_t) * WX_MAX_RDESC, M_DEVBUF);
sc->rdescriptors = NULL;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
printf("%s: xmt descriptors not 4KB aligned\n", sc->wx_name);
return (-1);
}
bzero(sc->tdescriptors, len);
return (0);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_dring_teardown(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
if (sc->rdescriptors) {
Thanks for Andrew Gallatin pointing out that freeing contigmalloc'd items via free is bad.
2000-07-09 00:18:21 +00:00
contigfree(sc->rdescriptors,
sizeof (wxrd_t) * WX_MAX_RDESC, M_DEVBUF);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->rdescriptors = NULL;
}
if (sc->tdescriptors) {
Thanks for Andrew Gallatin pointing out that freeing contigmalloc'd items via free is bad.
2000-07-09 00:18:21 +00:00
contigfree(sc->tdescriptors,
sizeof (wxtd_t) * WX_MAX_TDESC, M_DEVBUF);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->tdescriptors = NULL;
}
}
static device_method_t wx_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, wx_probe),
DEVMETHOD(device_attach, wx_attach),
DEVMETHOD(device_detach, wx_detach),
DEVMETHOD(device_shutdown, wx_shutdown),
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
/* bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
/* MII interface */
DEVMETHOD(miibus_readreg, wx_miibus_readreg),
DEVMETHOD(miibus_writereg, wx_miibus_writereg),
DEVMETHOD(miibus_statchg, wx_miibus_statchg),
DEVMETHOD(miibus_mediainit, wx_miibus_mediainit),
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{ 0, 0 }
};
static driver_t wx_driver = {
"wx", wx_methods, sizeof(wx_softc_t),
};
static devclass_t wx_devclass;
DRIVER_MODULE(if_wx, pci, wx_driver, wx_devclass, 0, 0);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DRIVER_MODULE(miibus, wx, miibus_driver, miibus_devclass, 0, 0);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#endif
/*
* Do generic parts of attach. Our registers have been mapped
* and our interrupt registered.
*/
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_attach_common(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
size_t len;
u_int32_t tmp;
int ll = 0;
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* First, check for revision support.
*/
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_0) {
printf("%s: cannot support ID 0x%x, revision %d chips\n",
sc->wx_name, sc->wx_idnrev >> 16, sc->wx_idnrev & 0xffff);
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
return (ENXIO);
}
/*
* Second, reset the chip.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
wx_hw_stop(sc);
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Third, validate our EEPROM.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
/* TBD */
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Fourth, read eeprom for our MAC address and other things.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
wx_read_eeprom(sc, (u_int16_t *)sc->wx_enaddr, WX_EEPROM_MAC_OFF, 3);
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Fifth, establish some adapter parameters.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
sc->wx_txint_delay = 128;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
sc->wx_dcr = 0;
if (IS_LIVENGOOD_CU(sc)) {
/* settings to talk to PHY */
sc->wx_dcr |= WXDCR_FRCSPD | WXDCR_FRCDPX | WXDCR_SLU;
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
/*
* Raise the PHY's reset line to make it operational.
*/
tmp = READ_CSR(sc, WXREG_EXCT);
tmp |= WXPHY_RESET_DIR4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
tmp = READ_CSR(sc, WXREG_EXCT);
tmp &= ~WXPHY_RESET4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
tmp = READ_CSR(sc, WXREG_EXCT);
tmp |= WXPHY_RESET4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
if (wx_attach_phy(sc)) {
goto fail;
}
} else {
ifmedia_init(&sc->wx_media, IFM_IMASK,
wx_ifmedia_upd, wx_ifmedia_sts);
ifmedia_add(&sc->wx_media,
IFM_ETHER|IFM_1000_SX, 0, NULL);
ifmedia_add(&sc->wx_media,
IFM_ETHER|IFM_1000_SX|IFM_FDX, 0, NULL);
ifmedia_set(&sc->wx_media, IFM_ETHER|IFM_1000_SX|IFM_FDX);
sc->wx_media.ifm_media = sc->wx_media.ifm_cur->ifm_media;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Sixth, establish a default device control register word.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
ll += 1;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (sc->wx_cfg1 & WX_EEPROM_CTLR1_FD)
sc->wx_dcr |= WXDCR_FD;
if (sc->wx_cfg1 & WX_EEPROM_CTLR1_ILOS)
sc->wx_dcr |= WXDCR_ILOS;
tmp = (sc->wx_cfg1 >> WX_EEPROM_CTLR1_SWDPIO_SHIFT) & WXDCR_SWDPIO_MASK;
sc->wx_dcr |= (tmp << WXDCR_SWDPIO_SHIFT);
if (sc->wx_no_ilos)
sc->wx_dcr &= ~WXDCR_ILOS;
if (sc->wx_ilos)
sc->wx_dcr |= WXDCR_ILOS;
if (sc->wx_no_flow == 0)
sc->wx_dcr |= WXDCR_RFCE | WXDCR_TFCE;
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Seventh, allocate various sw structures...
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
len = sizeof (rxpkt_t) * WX_MAX_RDESC;
sc->rbase = (rxpkt_t *) WXMALLOC(len);
if (sc->rbase == NULL) {
goto fail;
}
bzero(sc->rbase, len);
ll += 1;
len = sizeof (txpkt_t) * WX_MAX_TDESC;
sc->tbase = (txpkt_t *) WXMALLOC(len);
if (sc->tbase == NULL) {
goto fail;
}
bzero(sc->tbase, len);
ll += 1;
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Eighth, allocate and dma map (platform dependent) descriptor rings.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
* They have to be aligned on a 4KB boundary.
*/
if (wx_dring_setup(sc) == 0) {
return (0);
}
fail:
printf("%s: failed to do common attach (%d)\n", sc->wx_name, ll);
wx_dring_teardown(sc);
if (sc->rbase) {
WXFREE(sc->rbase);
sc->rbase = NULL;
}
if (sc->tbase) {
WXFREE(sc->tbase);
sc->tbase = NULL;
}
return (ENOMEM);
}
/*
* EEPROM functions.
*/
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_eeprom_raise_clk(wx_softc_t *sc, u_int32_t regval)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
WRITE_CSR(sc, WXREG_EECDR, regval | WXEECD_SK);
DELAY(50);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_eeprom_lower_clk(wx_softc_t *sc, u_int32_t regval)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
WRITE_CSR(sc, WXREG_EECDR, regval & ~WXEECD_SK);
DELAY(50);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_eeprom_sobits(wx_softc_t *sc, u_int16_t data, u_int16_t count)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
u_int32_t regval, mask;
mask = 1 << (count - 1);
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_DO);
do {
if (data & mask)
regval |= WXEECD_DI;
else
regval &= ~WXEECD_DI;
WRITE_CSR(sc, WXREG_EECDR, regval); DELAY(50);
wx_eeprom_raise_clk(sc, regval);
wx_eeprom_lower_clk(sc, regval);
mask >>= 1;
} while (mask != 0);
WRITE_CSR(sc, WXREG_EECDR, regval & ~WXEECD_DI);
}
static INLINE u_int16_t
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_eeprom_sibits(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
unsigned int regval, i;
u_int16_t data;
data = 0;
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_DO);
for (i = 0; i != 16; i++) {
data <<= 1;
wx_eeprom_raise_clk(sc, regval);
regval = READ_CSR(sc, WXREG_EECDR) & ~WXEECD_DI;
if (regval & WXEECD_DO) {
data |= 1;
}
wx_eeprom_lower_clk(sc, regval);
}
return (data);
}
static INLINE void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_eeprom_cleanup(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
u_int32_t regval;
regval = READ_CSR(sc, WXREG_EECDR) & ~(WXEECD_DI|WXEECD_CS);
WRITE_CSR(sc, WXREG_EECDR, regval); DELAY(50);
wx_eeprom_raise_clk(sc, regval);
wx_eeprom_lower_clk(sc, regval);
}
static u_int16_t INLINE
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_read_eeprom_word(wx_softc_t *sc, int offset)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
u_int16_t data;
WRITE_CSR(sc, WXREG_EECDR, WXEECD_CS);
wx_eeprom_sobits(sc, EEPROM_READ_OPCODE, 3);
wx_eeprom_sobits(sc, offset, 6);
data = wx_eeprom_sibits(sc);
wx_eeprom_cleanup(sc);
return (data);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_read_eeprom(wx_softc_t *sc, u_int16_t *data, int offset, int words)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
int i;
for (i = 0; i < words; i++) {
*data++ = wx_read_eeprom_word(sc, offset++);
}
sc->wx_cfg1 = wx_read_eeprom_word(sc, WX_EEPROM_CTLR1_OFF);
}
/*
* Start packet transmission on the interface.
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_start(struct ifnet *ifp)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_softc_t *sc = SOFTC_IFP(ifp);
u_int16_t cidx, nactv;
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_start\n", sc->wx_name));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
nactv = sc->tactive;
while (nactv < WX_MAX_TDESC) {
int ndesc;
int gctried = 0;
struct mbuf *m, *mb_head;
IF_DEQUEUE(&ifp->if_snd, mb_head);
if (mb_head == NULL) {
break;
}
sc->wx_xmitwanted++;
/*
* If we have a packet less than ethermin, pad it out.
*/
if (mb_head->m_pkthdr.len < WX_MIN_RPKT_SIZE) {
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
m_freem(mb_head);
break;
}
m_copydata(mb_head, 0, mb_head->m_pkthdr.len,
mtod(m, caddr_t));
m->m_pkthdr.len = m->m_len = WX_MIN_RPKT_SIZE;
bzero(mtod(m, char *) + mb_head->m_pkthdr.len,
WX_MIN_RPKT_SIZE - mb_head->m_pkthdr.len);
sc->wx_xmitpullup++;
m_freem(mb_head);
mb_head = m;
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
again:
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
cidx = sc->tnxtfree;
nactv = sc->tactive;
/*
* Go through each of the mbufs in the chain and initialize
* the transmit buffer descriptors with the physical address
* and size of that mbuf. If we have a length less than our
* minimum transmit size, we bail (to do a pullup). If we run
* out of descriptors, we also bail and try and do a pullup.
*/
for (ndesc = 0, m = mb_head; m != NULL; m = m->m_next) {
vm_offset_t vptr;
wxtd_t *td;
/*
* If this mbuf has no data, skip it.
*/
if (m->m_len == 0) {
continue;
}
/*
* If this packet is too small for the chip's minimum,
* break out to to cluster it.
*/
if (m->m_len < WX_MIN_RPKT_SIZE) {
sc->wx_xmitrunt++;
break;
}
/*
* Do we have a descriptor available for this mbuf?
*/
if (++nactv == WX_MAX_TDESC) {
if (gctried++ == 0) {
sc->wx_xmitgc++;
wx_gc(sc);
goto again;
}
break;
}
sc->tbase[cidx].dptr = m;
td = &sc->tdescriptors[cidx];
td->length = m->m_len;
vptr = mtod(m, vm_offset_t);
td->address.highpart = 0;
td->address.lowpart = vtophys(vptr);
td->cso = 0;
td->status = 0;
td->special = 0;
td->cmd = 0;
td->css = 0;
if (sc->wx_debug) {
printf("%s: XMIT[%d] %p vptr %lx (length %d "
Correctly put the place to mark EOP where we actually do the packet transmission- this handles the odd and rare case of a list terminating with a zero length mbuf.
2000-01-23 03:19:49 +00:00
"DMA addr %x) idx %d\n", sc->wx_name,
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ndesc, m, (long) vptr, td->length,
Correctly put the place to mark EOP where we actually do the packet transmission- this handles the odd and rare case of a list terminating with a zero length mbuf.
2000-01-23 03:19:49 +00:00
td->address.lowpart, cidx);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
ndesc++;
cidx = T_NXT_IDX(cidx);
}
/*
* If we get here and m is NULL, we can send
* the the packet chain described by mb_head.
*/
if (m == NULL) {
Correctly put the place to mark EOP where we actually do the packet transmission- this handles the odd and rare case of a list terminating with a zero length mbuf.
2000-01-23 03:19:49 +00:00
/*
* Mark the last descriptor with EOP and tell the
* chip to insert a final checksum.
*/
wxtd_t *td = &sc->tdescriptors[T_PREV_IDX(cidx)];
td->cmd = TXCMD_EOP|TXCMD_IFCS;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->tbase[sc->tnxtfree].sidx = sc->tnxtfree;
sc->tbase[sc->tnxtfree].eidx = cidx;
sc->tbase[sc->tnxtfree].next = NULL;
if (sc->tbsyf) {
sc->tbsyl->next = &sc->tbase[sc->tnxtfree];
} else {
sc->tbsyf = &sc->tbase[sc->tnxtfree];
}
sc->tbsyl = &sc->tbase[sc->tnxtfree];
sc->tnxtfree = cidx;
sc->tactive = nactv;
ifp->if_timer = 10;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_WISEMAN(sc)) {
WRITE_CSR(sc, WXREG_TDT, cidx);
} else {
WRITE_CSR(sc, WXREG_TDT_LIVENGOOD, cidx);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (ifp->if_bpf)
bpf_mtap(WX_BPFTAP_ARG(ifp), mb_head);
continue;
}
/*
* Otherwise, we couldn't send this packet for some reason.
*
* If don't have a descriptor available, and this is a
* single mbuf packet, freeze output so that later we
* can restart when we have more room. Otherwise, we'll
* try and cluster the request. We've already tried to
* garbage collect completed descriptors.
*/
if (nactv == WX_MAX_TDESC && mb_head->m_next == NULL) {
sc->wx_xmitputback++;
ifp->if_flags |= IFF_OACTIVE;
IF_PREPEND(&ifp->if_snd, mb_head);
break;
}
/*
* Otherwise, it's either a fragment length somewhere in the
* chain that isn't at least WX_MIN_XPKT_SIZE in length or
* the number of fragments exceeds the number of descriptors
* available.
*
* We could try a variety of strategies here- if this is
* a length problem for single mbuf packet or a length problem
* for the last mbuf in a chain (we could just try and adjust
* it), but it's just simpler to try and cluster it.
*/
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == NULL) {
m_freem(mb_head);
break;
}
MCLGET(m, M_DONTWAIT);
if ((m->m_flags & M_EXT) == 0) {
m_freem(m);
m_freem(mb_head);
break;
}
m_copydata(mb_head, 0, mb_head->m_pkthdr.len, mtod(m, caddr_t));
m->m_pkthdr.len = m->m_len = mb_head->m_pkthdr.len;
m_freem(mb_head);
mb_head = m;
sc->wx_xmitcluster++;
goto again;
}
if (sc->tactive == WX_MAX_TDESC) {
sc->wx_xmitblocked++;
ifp->if_flags |= IFF_OACTIVE;
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
/* used SW LED to indicate transmission active */
if (sc->tactive > 0 && sc->wx_mii) {
WRITE_CSR(sc, WXREG_DCR,
READ_CSR(sc, WXREG_DCR) | (WXDCR_SWDPIO0|WXDCR_SWDPIN0));
}
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
/*
* Process interface interrupts.
*/
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_intr(void *arg)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_softc_t *sc = arg;
int claimed = 0;
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
WX_ILOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Read interrupt cause register. Reading it clears bits.
*/
sc->wx_icr = READ_CSR(sc, WXREG_ICR);
if (sc->wx_icr) {
claimed++;
WX_DISABLE_INT(sc);
sc->wx_intr++;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (sc->wx_icr & (WXISR_LSC|WXISR_RXSEQ|WXISR_GPI_EN1)) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_handle_link_intr(sc);
}
wx_handle_rxint(sc);
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->tactive) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_gc(sc);
}
if (sc->wx_if.if_snd.ifq_head != NULL) {
wx_start(&sc->wx_if);
}
WX_ENABLE_INT(sc);
}
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
WX_IUNLK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (claimed);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_handle_link_intr(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
u_int32_t txcw, rxcw, dcr, dsr;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->wx_linkintr++;
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
dcr = READ_CSR(sc, WXREG_DCR);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: handle_link_intr: icr=%#x dcr=%#x\n",
sc->wx_name, sc->wx_icr, dcr));
if (sc->wx_mii) {
mii_pollstat(sc->wx_mii);
if (sc->wx_mii->mii_media_status & IFM_ACTIVE) {
if (IFM_SUBTYPE(sc->wx_mii->mii_media_active) ==
IFM_NONE) {
IPRINTF(sc, (ldn, sc->wx_name));
sc->linkup = 0;
} else {
IPRINTF(sc, (lup, sc->wx_name));
sc->linkup = 1;
}
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
} else if (sc->wx_icr & WXISR_RXSEQ) {
DPRINTF(sc, (sqe, sc->wx_name));
}
return;
}
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
txcw = READ_CSR(sc, WXREG_XMIT_CFGW);
rxcw = READ_CSR(sc, WXREG_RECV_CFGW);
dsr = READ_CSR(sc, WXREG_DSR);
/*
* If we have LOS or are now receiving Ordered Sets and are not
* doing auto-negotiation, restore autonegotiation.
*/
if (((dcr & WXDCR_SWDPIN1) || (rxcw & WXRXCW_C)) &&
((txcw & WXTXCW_ANE) == 0)) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, (ane, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
WRITE_CSR(sc, WXREG_XMIT_CFGW, WXTXCW_DEFAULT);
sc->wx_dcr &= ~WXDCR_SLU;
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
sc->ane_failed = 0;
}
if (sc->wx_icr & WXISR_LSC) {
if (READ_CSR(sc, WXREG_DSR) & WXDSR_LU) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
IPRINTF(sc, (lup, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
sc->linkup = 1;
sc->wx_dcr |= (WXDCR_SWDPIO0|WXDCR_SWDPIN0);
} else {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
IPRINTF(sc, (ldn, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
sc->linkup = 0;
sc->wx_dcr &= ~(WXDCR_SWDPIO0|WXDCR_SWDPIN0);
}
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
} else {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, (sqe, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
}
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_check_link(wx_softc_t *sc)
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
{
u_int32_t rxcw, dcr, dsr;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (sc->wx_mii) {
mii_pollstat(sc->wx_mii);
return;
}
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
rxcw = READ_CSR(sc, WXREG_RECV_CFGW);
dcr = READ_CSR(sc, WXREG_DCR);
dsr = READ_CSR(sc, WXREG_DSR);
if ((dsr & WXDSR_LU) == 0 && (dcr & WXDCR_SWDPIN1) == 0 &&
(rxcw & WXRXCW_C) == 0) {
if (sc->ane_failed == 0) {
sc->ane_failed = 1;
return;
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, (inane, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
WRITE_CSR(sc, WXREG_XMIT_CFGW, WXTXCW_DEFAULT & ~WXTXCW_ANE);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_1)
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
sc->wx_dcr &= ~WXDCR_TFCE;
sc->wx_dcr |= WXDCR_SLU;
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
} else if ((rxcw & WXRXCW_C) != 0 && (dcr & WXDCR_SLU) != 0) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, (ane, sc->wx_name));
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
WRITE_CSR(sc, WXREG_XMIT_CFGW, WXTXCW_DEFAULT);
sc->wx_dcr &= ~WXDCR_SLU;
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_handle_rxint(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct ether_header *eh;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
struct mbuf *m0, *mb, *pending[WX_MAX_RDESC];
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
struct ifnet *ifp = &sc->wx_if;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
int npkts, ndesc, lidx, idx, tlen;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_handle_rxint\n", sc->wx_name));
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
for (m0 = sc->rpending, tlen = ndesc = npkts = 0, idx = sc->rnxt,
lidx = R_PREV_IDX(idx); ndesc < WX_MAX_RDESC;
ndesc++, lidx = idx, idx = R_NXT_IDX(idx)) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wxrd_t *rd;
rxpkt_t *rxpkt;
int length, offset, lastframe;
rd = &sc->rdescriptors[idx];
if ((rd->status & RDSTAT_DD) == 0) {
if (m0) {
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->rpending == NULL) {
m0->m_pkthdr.len = tlen;
sc->rpending = m0;
} else {
m_freem(m0);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
m0 = NULL;
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: WXRX: ndesc %d idx %d lidx %d\n",
sc->wx_name, ndesc, idx, lidx));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
break;
}
if (rd->errors != 0) {
printf("%s: packet with errors (%x)\n",
sc->wx_name, rd->errors);
rd->status = 0;
ifp->if_ierrors++;
if (m0) {
m_freem(m0);
m0 = NULL;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->rpending) {
m_freem(sc->rpending);
sc->rpending = NULL;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
continue;
}
rxpkt = &sc->rbase[idx];
mb = rxpkt->dptr;
if (mb == NULL) {
printf("%s: receive descriptor with no mbuf\n",
sc->wx_name);
(void) wx_get_rbuf(sc, rxpkt);
rd->status = 0;
ifp->if_ierrors++;
if (m0) {
m_freem(m0);
m0 = NULL;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->rpending) {
m_freem(sc->rpending);
sc->rpending = NULL;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
continue;
}
/* XXX: Flush DMA for rxpkt */
if (wx_get_rbuf(sc, rxpkt)) {
sc->wx_rxnobuf++;
wx_rxdma_map(sc, rxpkt, mb);
ifp->if_ierrors++;
rd->status = 0;
if (m0) {
m_freem(m0);
m0 = NULL;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->rpending) {
m_freem(sc->rpending);
sc->rpending = NULL;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
continue;
}
/*
* Save the completing packet's offset value and length
* and install the new one into the descriptor.
*/
lastframe = (rd->status & RDSTAT_EOP) != 0;
length = rd->length;
offset = rd->address.lowpart & 0xff;
bzero (rd, sizeof (*rd));
rd->address.lowpart = rxpkt->dma_addr + WX_RX_OFFSET_VALUE;
mb->m_len = length;
mb->m_data += offset;
mb->m_next = NULL;
if (m0 == NULL) {
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
m0 = mb;
tlen = length;
} else if (m0 == sc->rpending) {
/*
* Pick up where we left off before. If
* we have an offset (we're assuming the
* first frame has an offset), then we've
* lost sync somewhere along the line.
*/
if (offset) {
printf("%s: lost sync with partial packet\n",
sc->wx_name);
m_freem(sc->rpending);
sc->rpending = NULL;
m0 = mb;
tlen = length;
} else {
sc->rpending = NULL;
tlen = m0->m_pkthdr.len;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
} else {
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
tlen += length;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: RDESC[%d] len %d off %d lastframe %d\n",
sc->wx_name, idx, mb->m_len, offset, lastframe));
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (m0 != mb)
m_cat(m0, mb);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (lastframe == 0) {
continue;
}
m0->m_pkthdr.rcvif = ifp;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
m0->m_pkthdr.len = tlen - WX_CRC_LENGTH;
mb->m_len -= WX_CRC_LENGTH;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
eh = mtod(m0, struct ether_header *);
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
/*
* No need to check for promiscous mode since
* the decision to keep or drop the packet is
* handled by ether_input()
*/
pending[npkts++] = m0;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
m0 = NULL;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
tlen = 0;
}
if (ndesc) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_WISEMAN(sc)) {
WRITE_CSR(sc, WXREG_RDT0, lidx);
} else {
WRITE_CSR(sc, WXREG_RDT0_LIVENGOOD, lidx);
}
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
sc->rnxt = idx;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
if (npkts) {
sc->wx_rxintr++;
}
for (idx = 0; idx < npkts; idx++) {
mb = pending[idx];
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
#if NBPFILTER > 0
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (ifp->if_bpf) {
bpf_mtap(WX_BPFTAP_ARG(ifp), mb);
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
#endif
ifp->if_ipackets++;
DPRINTF(sc, ("%s: RECV packet length %d\n",
sc->wx_name, mb->m_pkthdr.len));
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if defined(__FreeBSD__) || defined(__OpenBSD__)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
eh = mtod(mb, struct ether_header *);
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
m_adj(mb, sizeof (struct ether_header));
Remove some debugging code, replace one line that had spaces with tabs, and fix a silly botch for reinit.
2000-01-23 02:07:31 +00:00
ether_input(ifp, eh, mb);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
#else
(*ifp->if_input)(ifp, mb);
#endif
}
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_gc(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct ifnet *ifp = &sc->wx_if;
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
txpkt_t *txpkt;
u_int32_t tdh;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
txpkt = sc->tbsyf;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_WISEMAN(sc)) {
tdh = READ_CSR(sc, WXREG_TDH);
} else {
tdh = READ_CSR(sc, WXREG_TDH_LIVENGOOD);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
while (txpkt != NULL) {
u_int32_t end = txpkt->eidx, cidx = tdh;
/*
* Normalize start..end indices to 2 *
* WX_MAX_TDESC range to eliminate wrap.
*/
if (txpkt->eidx < txpkt->sidx) {
end += WX_MAX_TDESC;
}
/*
* Normalize current chip index to 2 *
* WX_MAX_TDESC range to eliminate wrap.
*/
if (cidx < txpkt->sidx) {
cidx += WX_MAX_TDESC;
}
/*
* If the current chip index is between low and
* high indices for this packet, it's not finished
* transmitting yet. Because transmits are done FIFO,
* this means we're done garbage collecting too.
*/
if (txpkt->sidx <= cidx && cidx < txpkt->eidx) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: TXGC %d..%d TDH %d\n", sc->wx_name,
txpkt->sidx, txpkt->eidx, tdh));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
break;
}
ifp->if_opackets++;
if (txpkt->dptr) {
(void) m_freem(txpkt->dptr);
} else {
printf("%s: null mbuf in gc\n", sc->wx_name);
}
for (cidx = txpkt->sidx; cidx != txpkt->eidx;
cidx = T_NXT_IDX(cidx)) {
txpkt_t *tmp;
wxtd_t *td;
td = &sc->tdescriptors[cidx];
if (td->status & TXSTS_EC) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
IPRINTF(sc, ("%s: excess collisions\n",
sc->wx_name));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp->if_collisions++;
ifp->if_oerrors++;
}
if (td->status & TXSTS_LC) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
IPRINTF(sc,
("%s: lost carrier\n", sc->wx_name));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifp->if_oerrors++;
}
tmp = &sc->tbase[cidx];
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: TXGC[%d] %p %d..%d done nact %d "
"TDH %d\n", sc->wx_name, cidx, tmp->dptr,
txpkt->sidx, txpkt->eidx, sc->tactive, tdh));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
tmp->dptr = NULL;
if (sc->tactive == 0) {
printf("%s: nactive < 0?\n", sc->wx_name);
} else {
sc->tactive -= 1;
}
bzero(td, sizeof (*td));
}
sc->tbsyf = txpkt->next;
txpkt = sc->tbsyf;
}
if (sc->tactive < WX_MAX_TDESC) {
ifp->if_timer = 0;
ifp->if_flags &= ~IFF_OACTIVE;
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
/* used SW LED to indicate transmission not active */
if (sc->tactive == 0 && sc->wx_mii) {
WRITE_CSR(sc, WXREG_DCR,
READ_CSR(sc, WXREG_DCR) & ~(WXDCR_SWDPIO0|WXDCR_SWDPIN0));
}
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Periodic timer to update packet in/out/collision statistics,
* and, more importantly, garbage collect completed transmissions
* and to handle link status changes.
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_watchdog(void *arg)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_softc_t *sc = arg;
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_gc(sc);
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
wx_check_link(sc);
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Schedule another timeout one second from now.
*/
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
VTIMEOUT(sc, wx_watchdog, sc, hz);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
/*
* Stop and reinitialize the hardware
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_hw_stop(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
u_int32_t icr;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_hw_stop\n", sc->wx_name));
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_1) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_mwi_whackon(sc);
}
WRITE_CSR(sc, WXREG_DCR, WXDCR_RST);
DELAY(20 * 1000);
WRITE_CSR(sc, WXREG_IMASK, ~0);
icr = READ_CSR(sc, WXREG_ICR);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_1) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_mwi_unwhack(sc);
}
WX_DISABLE_INT(sc);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_set_addr(wx_softc_t *sc, int idx, u_int8_t *mac)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
u_int32_t t0, t1;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_set_addr\n", sc->wx_name));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
t0 = (mac[0]) | (mac[1] << 8) | (mac[2] << 16) | (mac[3] << 24);
t1 = (mac[4] << 0) | (mac[5] << 8);
t1 |= WX_RAL_AV;
WRITE_CSR(sc, WXREG_RAL_LO(idx), t0);
WRITE_CSR(sc, WXREG_RAL_HI(idx), t1);
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_hw_initialize(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
int i;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_hw_initialize\n", sc->wx_name));
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
WRITE_CSR(sc, WXREG_VET, 0);
for (i = 0; i < (WX_VLAN_TAB_SIZE << 2); i += 4) {
WRITE_CSR(sc, (WXREG_VFTA + i), 0);
}
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_1) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_mwi_whackon(sc);
WRITE_CSR(sc, WXREG_RCTL, WXRCTL_RST);
DELAY(5 * 1000);
}
/*
* Load the first receiver address with our MAC address,
* and load as many multicast addresses as can fit into
* the receive address array.
*/
wx_set_addr(sc, 0, sc->wx_enaddr);
for (i = 1; i <= sc->wx_nmca; i++) {
if (i >= WX_RAL_TAB_SIZE) {
break;
} else {
wx_set_addr(sc, i, sc->wx_mcaddr[i-1]);
}
}
while (i < WX_RAL_TAB_SIZE) {
WRITE_CSR(sc, WXREG_RAL_LO(i), 0);
WRITE_CSR(sc, WXREG_RAL_HI(i), 0);
i++;
}
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (sc->wx_idnrev < WX_WISEMAN_2_1) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
WRITE_CSR(sc, WXREG_RCTL, 0);
DELAY(1 * 1000);
wx_mwi_unwhack(sc);
}
/*
* Clear out the hashed multicast table array.
*/
for (i = 0; i < WX_MC_TAB_SIZE; i++) {
WRITE_CSR(sc, WXREG_MTA + (sizeof (u_int32_t) * 4), 0);
}
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_LIVENGOOD_CU(sc)) {
/*
* has a PHY - raise its reset line to make it operational
*/
u_int32_t tmp = READ_CSR(sc, WXREG_EXCT);
tmp |= WXPHY_RESET_DIR4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
tmp = READ_CSR(sc, WXREG_EXCT);
tmp &= ~WXPHY_RESET4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
tmp = READ_CSR(sc, WXREG_EXCT);
tmp |= WXPHY_RESET4;
WRITE_CSR(sc, WXREG_EXCT, tmp);
DELAY(20*1000);
} else if (IS_LIVENGOOD(sc)) {
u_int16_t tew;
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
/*
* Handle link control
*/
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr | WXDCR_LRST);
DELAY(50 * 1000);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
wx_read_eeprom(sc, &tew, WX_EEPROM_CTLR2_OFF, 1);
tew = (tew & WX_EEPROM_CTLR2_SWDPIO) << WX_EEPROM_EXT_SHIFT;
WRITE_CSR(sc, WXREG_EXCT, (u_int32_t)tew);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
if (sc->wx_dcr & (WXDCR_RFCE|WXDCR_TFCE)) {
WRITE_CSR(sc, WXREG_FCAL, FC_FRM_CONST_LO);
WRITE_CSR(sc, WXREG_FCAH, FC_FRM_CONST_HI);
WRITE_CSR(sc, WXREG_FCT, FC_TYP_CONST);
} else {
WRITE_CSR(sc, WXREG_FCAL, 0);
WRITE_CSR(sc, WXREG_FCAH, 0);
WRITE_CSR(sc, WXREG_FCT, 0);
}
WRITE_CSR(sc, WXREG_FLOW_XTIMER, WX_XTIMER_DFLT);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_WISEMAN(sc)) {
if (sc->wx_idnrev < WX_WISEMAN_2_1) {
WRITE_CSR(sc, WXREG_FLOW_RCV_HI, 0);
WRITE_CSR(sc, WXREG_FLOW_RCV_LO, 0);
sc->wx_dcr &= ~(WXDCR_RFCE|WXDCR_TFCE);
} else {
WRITE_CSR(sc, WXREG_FLOW_RCV_HI, WX_RCV_FLOW_HI_DFLT);
WRITE_CSR(sc, WXREG_FLOW_RCV_LO, WX_RCV_FLOW_LO_DFLT);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
} else {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
WRITE_CSR(sc, WXREG_FLOW_RCV_HI_LIVENGOOD, WX_RCV_FLOW_HI_DFLT);
WRITE_CSR(sc, WXREG_FLOW_RCV_LO_LIVENGOOD, WX_RCV_FLOW_LO_DFLT);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (!IS_LIVENGOOD_CU(sc))
WRITE_CSR(sc, WXREG_XMIT_CFGW, WXTXCW_DEFAULT);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
WRITE_CSR(sc, WXREG_DCR, sc->wx_dcr);
DELAY(50 * 1000);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (!IS_LIVENGOOD_CU(sc)) {
/*
* The pin stuff is all FM from the Linux driver.
*/
if ((READ_CSR(sc, WXREG_DCR) & WXDCR_SWDPIN1) == 0) {
for (i = 0; i < (WX_LINK_UP_TIMEOUT/10); i++) {
DELAY(10 * 1000);
if (READ_CSR(sc, WXREG_DSR) & WXDSR_LU) {
sc->linkup = 1;
break;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (sc->linkup == 0) {
sc->ane_failed = 1;
wx_check_link(sc);
}
sc->ane_failed = 0;
} else {
printf("%s: SWDPIO1 did not clear- check for reversed "
"or disconnected cable\n", sc->wx_name);
/* but return okay anyway */
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
sc->wx_ienable = WXIENABLE_DEFAULT;
return (0);
}
/*
* Stop the interface. Cancels the statistics updater and resets the interface.
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_stop(wx_softc_t *sc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
txpkt_t *txp;
rxpkt_t *rxp;
struct ifnet *ifp = &sc->wx_if;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_stop\n", sc->wx_name));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Cancel stats updater.
*/
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
UNTIMEOUT(wx_watchdog, sc, sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Reset the chip
*/
wx_hw_stop(sc);
/*
* Release any xmit buffers.
*/
for (txp = sc->tbase; txp && txp < &sc->tbase[WX_MAX_TDESC]; txp++) {
if (txp->dptr) {
m_free(txp->dptr);
txp->dptr = NULL;
}
}
/*
* Free all the receive buffers.
*/
for (rxp = sc->rbase; rxp && rxp < &sc->rbase[WX_MAX_RDESC]; rxp++) {
if (rxp->dptr) {
m_free(rxp->dptr);
rxp->dptr = NULL;
}
}
Remove some debugging code, replace one line that had spaces with tabs, and fix a silly botch for reinit.
2000-01-23 02:07:31 +00:00
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
if (sc->rpending) {
Remove some debugging code, replace one line that had spaces with tabs, and fix a silly botch for reinit.
2000-01-23 02:07:31 +00:00
m_freem(sc->rpending);
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
sc->rpending = NULL;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* And we're outta here...
*/
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
ifp->if_timer = 0;
}
/*
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
* Transmit Watchdog
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_txwatchdog(struct ifnet *ifp)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_softc_t *sc = SOFTC_IFP(ifp);
printf("%s: device timeout\n", sc->wx_name);
ifp->if_oerrors++;
if (wx_init(sc)) {
printf("%s: could not re-init device\n", sc->wx_name);
VTIMEOUT(sc, (void (*)(void *))wx_init, sc, hz);
}
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_init(void *xsc)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
struct ifmedia *ifm;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
wx_softc_t *sc = xsc;
struct ifnet *ifp = &sc->wx_if;
rxpkt_t *rxpkt;
wxrd_t *rd;
size_t len;
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
int i, bflags;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_init\n", sc->wx_name));
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Cancel any pending I/O by resetting things.
* wx_stop will free any allocated mbufs.
*/
wx_stop(sc);
/*
* Reset the hardware. All network addresses loaded here, but
* neither the receiver nor the transmitter are enabled.
*/
if (wx_hw_initialize(sc)) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: wx_hw_initialize failed\n", sc->wx_name));
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (EIO);
}
/*
* Set up the receive ring stuff.
*/
len = sizeof (wxrd_t) * WX_MAX_RDESC;
bzero(sc->rdescriptors, len);
for (rxpkt = sc->rbase, i = 0; rxpkt != NULL && i < WX_MAX_RDESC;
Get rid of the WX_XMIT_SMALL code- we've fixed that problem. Restructure the receive code so that it correctly chains receive descriptors together and handles the case that only a part of a packet is done at the time we get here.
2000-01-23 01:49:11 +00:00
i += RXINCR, rxpkt++) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
rd = &sc->rdescriptors[i];
if (wx_get_rbuf(sc, rxpkt)) {
break;
}
rd->address.lowpart = rxpkt->dma_addr + WX_RX_OFFSET_VALUE;
}
if (i != WX_MAX_RDESC) {
printf("%s: could not set up rbufs\n", sc->wx_name);
wx_stop(sc);
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (ENOMEM);
}
/*
* Set up transmit parameters and enable the transmitter.
*/
sc->tnxtfree = sc->tactive = 0;
sc->tbsyf = sc->tbsyl = NULL;
WRITE_CSR(sc, WXREG_TCTL, 0);
DELAY(5 * 1000);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
if (IS_WISEMAN(sc)) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
WRITE_CSR(sc, WXREG_TDBA_LO,
vtophys((vm_offset_t)&sc->tdescriptors[0]));
WRITE_CSR(sc, WXREG_TDBA_HI, 0);
WRITE_CSR(sc, WXREG_TDLEN, WX_MAX_TDESC * sizeof (wxtd_t));
WRITE_CSR(sc, WXREG_TDH, 0);
WRITE_CSR(sc, WXREG_TDT, 0);
WRITE_CSR(sc, WXREG_TQSA_HI, 0);
WRITE_CSR(sc, WXREG_TQSA_LO, 0);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
WRITE_CSR(sc, WXREG_TIPG, WX_WISEMAN_TIPG_DFLT);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
WRITE_CSR(sc, WXREG_TIDV, sc->wx_txint_delay);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
} else {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
WRITE_CSR(sc, WXREG_TDBA_LO_LIVENGOOD,
vtophys((vm_offset_t)&sc->tdescriptors[0]));
WRITE_CSR(sc, WXREG_TDBA_HI_LIVENGOOD, 0);
WRITE_CSR(sc, WXREG_TDLEN_LIVENGOOD,
WX_MAX_TDESC * sizeof (wxtd_t));
WRITE_CSR(sc, WXREG_TDH_LIVENGOOD, 0);
WRITE_CSR(sc, WXREG_TDT_LIVENGOOD, 0);
WRITE_CSR(sc, WXREG_TQSA_HI, 0);
WRITE_CSR(sc, WXREG_TQSA_LO, 0);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
WRITE_CSR(sc, WXREG_TIPG, WX_LIVENGOOD_TIPG_DFLT);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
WRITE_CSR(sc, WXREG_TIDV_LIVENGOOD, sc->wx_txint_delay);
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
WRITE_CSR(sc, WXREG_TCTL, (WXTCTL_CT(WX_COLLISION_THRESHOLD) |
WXTCTL_COLD(WX_FDX_COLLISION_DX) | WXTCTL_EN));
/*
* Set up receive parameters and enable the receiver.
*/
sc->rnxt = 0;
WRITE_CSR(sc, WXREG_RCTL, 0);
DELAY(5 * 1000);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_WISEMAN(sc)) {
WRITE_CSR(sc, WXREG_RDTR0, WXRDTR_FPD);
WRITE_CSR(sc, WXREG_RDBA0_LO,
vtophys((vm_offset_t)&sc->rdescriptors[0]));
WRITE_CSR(sc, WXREG_RDBA0_HI, 0);
WRITE_CSR(sc, WXREG_RDLEN0, WX_MAX_RDESC * sizeof (wxrd_t));
WRITE_CSR(sc, WXREG_RDH0, 0);
WRITE_CSR(sc, WXREG_RDT0, (WX_MAX_RDESC - RXINCR));
} else {
WRITE_CSR(sc, WXREG_RDTR0_LIVENGOOD, WXRDTR_FPD);
WRITE_CSR(sc, WXREG_RDBA0_LO_LIVENGOOD,
vtophys((vm_offset_t)&sc->rdescriptors[0]));
WRITE_CSR(sc, WXREG_RDBA0_HI_LIVENGOOD, 0);
WRITE_CSR(sc, WXREG_RDLEN0_LIVENGOOD,
WX_MAX_RDESC * sizeof (wxrd_t));
WRITE_CSR(sc, WXREG_RDH0_LIVENGOOD, 0);
WRITE_CSR(sc, WXREG_RDT0_LIVENGOOD, (WX_MAX_RDESC - RXINCR));
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
WRITE_CSR(sc, WXREG_RDTR1, 0);
WRITE_CSR(sc, WXREG_RDBA1_LO, 0);
WRITE_CSR(sc, WXREG_RDBA1_HI, 0);
WRITE_CSR(sc, WXREG_RDLEN1, 0);
WRITE_CSR(sc, WXREG_RDH1, 0);
WRITE_CSR(sc, WXREG_RDT1, 0);
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
if (ifp->if_mtu > ETHERMTU) {
bflags = WXRCTL_EN | WXRCTL_LPE | WXRCTL_2KRBUF;
} else {
bflags = WXRCTL_EN | WXRCTL_2KRBUF;
}
WRITE_CSR(sc, WXREG_RCTL, bflags |
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
((ifp->if_flags & IFF_BROADCAST) ? WXRCTL_BAM : 0) |
((ifp->if_flags & IFF_PROMISC) ? WXRCTL_UPE : 0) |
((sc->all_mcasts) ? WXRCTL_MPE : 0));
/*
* Enable Interrupts
*/
WX_ENABLE_INT(sc);
/*
* Mark that we're up and running...
*/
ifp->if_flags |= IFF_RUNNING;
ifp->if_flags &= ~IFF_OACTIVE;
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (sc->wx_mii) {
mii_mediachg(sc->wx_mii);
} else {
ifm = &sc->wx_media;
i = ifm->ifm_media;
ifm->ifm_media = ifm->ifm_cur->ifm_media;
wx_ifmedia_upd(ifp);
ifm->ifm_media = i;
}
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* Start stats updater.
*/
Fix this driver to (finally) work with switches. Some more black magic from the linux driver.
2000-06-16 06:28:31 +00:00
TIMEOUT(sc, wx_watchdog, sc, hz);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
/*
* And we're outta here...
*/
return (0);
}
/*
* Get a receive buffer for our use (and dma map the data area).
*
* This chip can have buffers be 256, 512, 1024 or 2048 bytes in size.
* It wants them aligned on 256 byte boundaries, but can actually cope
* with an offset in the first 255 bytes of the head of a receive frame.
*
* We'll allocate a MCLBYTE sized cluster but *not* adjust the data pointer
* by any alignment value. Instead, we'll tell the chip to offset by any
* alignment and we'll catch the alignment on the backend at interrupt time.
*/
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_rxdma_map(wx_softc_t *sc, rxpkt_t *rxpkt, struct mbuf *mb)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
rxpkt->dptr = mb;
rxpkt->dma_addr = vtophys(mtod(mb, vm_offset_t));
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_get_rbuf(wx_softc_t *sc, rxpkt_t *rxpkt)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct mbuf *mb;
MGETHDR(mb, M_DONTWAIT, MT_DATA);
if (mb == NULL) {
rxpkt->dptr = NULL;
return (-1);
}
MCLGET(mb, M_DONTWAIT);
if ((mb->m_flags & M_EXT) == 0) {
m_freem(mb);
rxpkt->dptr = NULL;
return (-1);
}
wx_rxdma_map(sc, rxpkt, mb);
return (0);
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_ioctl(struct ifnet *ifp, IOCTL_CMD_TYPE command, caddr_t data)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
wx_softc_t *sc = SOFTC_IFP(ifp);
struct ifreq *ifr = (struct ifreq *) data;
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
int error = 0;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_LOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
switch (command) {
case SIOCSIFADDR:
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#if !defined(__NetBSD__) && !defined(__OpenBSD__)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
case SIOCGIFADDR:
#endif
error = ether_ioctl(ifp, command, data);
break;
Restore a sense of cleanly supporting multiple platforms. That is, place the LOCKing macros within the areas within if_wxvar.h that is set aside for them. Put any platform specific data also in those areas. For ease of maintenance purposes, merge in the OpenBSD version codebase here.
2000-12-06 00:52:28 +00:00
#ifdef SIOCSIFMTU
put things in place for jumbograms
2000-01-25 06:09:53 +00:00
case SIOCSIFMTU:
if (ifr->ifr_mtu > WX_MAXMTU || ifr->ifr_mtu < ETHERMIN) {
error = EINVAL;
} else if (ifp->if_mtu != ifr->ifr_mtu) {
ifp->if_mtu = ifr->ifr_mtu;
error = wx_init(sc);
}
break;
#endif
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
case SIOCSIFFLAGS:
sc->all_mcasts = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0;
/*
* If interface is marked up and not running, then start it.
* If it is marked down and running, stop it.
* If it's up then re-initialize it. This is so flags
* such as IFF_PROMISC are handled.
*/
if (ifp->if_flags & IFF_UP) {
error = wx_init(sc);
} else {
if (ifp->if_flags & IFF_RUNNING) {
wx_stop(sc);
}
}
break;
#ifdef SIOCADDMULTI
case SIOCADDMULTI:
case SIOCDELMULTI:
#if defined(__NetBSD__)
{
int all_mc_change = (sc->all_mcasts ==
((ifp->if_flags & IFF_ALLMULTI) ? 1 : 0));
error = (command == SIOCADDMULTI) ?
ether_addmulti(ifr, &sc->w.ethercom) :
ether_delmulti(ifr, &sc->w.ethercom);
if (error != ENETRESET && all_mc_change == 0) {
break;
}
}
#endif
sc->all_mcasts = (ifp->if_flags & IFF_ALLMULTI) ? 1 : 0;
error = wx_mc_setup(sc);
break;
#endif
#ifdef SIOCGIFMEDIA
case SIOCGIFMEDIA:
case SIOCSIFMEDIA:
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: ioctl SIOC[GS]IFMEDIA: command=%#lx\n",
sc->wx_name, command));
if (sc->wx_mii) {
error = ifmedia_ioctl(ifp, ifr,
&sc->wx_mii->mii_media, command);
} else {
error = ifmedia_ioctl(ifp, ifr, &sc->wx_media, command);
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
break;
#endif
default:
error = EINVAL;
}
Don't attach the interface twice. While I'm here, add a driver mutex.
2000-11-25 06:04:18 +00:00
WX_UNLOCK(sc);
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (error);
}
static int
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_ifmedia_upd(struct ifnet *ifp)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
struct wx_softc *sc = SOFTC_IFP(ifp);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
struct ifmedia *ifm;
DPRINTF(sc, ("%s: ifmedia_upd\n", sc->wx_name));
if (sc->wx_mii) {
mii_mediachg(sc->wx_mii);
return 0;
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
ifm = &sc->wx_media;
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (EINVAL);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
return (0);
}
static void
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
wx_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
{
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
u_int32_t dsr;
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
struct wx_softc *sc = SOFTC_IFP(ifp);
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
DPRINTF(sc, ("%s: ifmedia_sts: ", sc->wx_name));
if (sc->wx_mii) {
mii_pollstat(sc->wx_mii);
ifmr->ifm_active = sc->wx_mii->mii_media_active;
ifmr->ifm_status = sc->wx_mii->mii_media_status;
DPRINTF(sc, ("active=%#x status=%#x\n",
ifmr->ifm_active, ifmr->ifm_status));
return;
}
DPRINTF(sc, ("\n"));
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifmr->ifm_status = IFM_AVALID;
ifmr->ifm_active = IFM_ETHER;
if (sc->linkup == 0)
return;
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
ifmr->ifm_status |= IFM_ACTIVE;
dsr = READ_CSR(sc, WXREG_DSR);
if (IS_LIVENGOOD(sc)) {
if (dsr & WXDSR_1000BT) {
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
if (IS_LIVENGOOD_CU(sc)) {
ifmr->ifm_status |= IFM_1000_TX;
}
else {
ifmr->ifm_status |= IFM_1000_SX;
}
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
} else if (dsr & WXDSR_100BT) {
ifmr->ifm_status |= IFM_100_FX; /* ?? */
} else {
ifmr->ifm_status |= IFM_10_T; /* ?? */
}
} else {
ifmr->ifm_status |= IFM_1000_SX;
}
if (dsr & WXDSR_FD) {
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
ifmr->ifm_active |= IFM_FDX;
Very early and very *very* lightly tested support for LIVENGOOD chipset (followon to WISEMAN). Presumably some flavors are also no multimode copper as well.
2000-10-16 23:08:45 +00:00
}
Add first pass of the Intel Gigabit Ethernet (wiseman) driver. This driver seems relatively functional, but could use some souping up, particularly in the performance area. This has both NetBSD and FreeBSD attachment code and a fair amount of effort has been put into making it easy to port to different *BSD platforms. The basic design is a one tfd per mbuf transmit (with no transmit related interrupts- tfds are gc'd as needed). The receive ring uses a 2K buffer per rfd with a +2 byte adjust for the ethernet header (so the payload is aligned). There's support that *almost* works for doing large packets- the rfd chaining code works, but there's some problem with getting good checksums at the IP reassembly level (ditto for doing short tfd's too). The chip has support for TCP checksums insertion for transmit and TCP checksum calculation on receive (for both you have to do some appropriate backoff && twiddling), but this isn't in place. This is nearly entirely reverse engineered from the released Intel driver, so there's a lot of "We have to do this but do not know why" stuff. There is somebody who has the chip specs who works in FreeBSD but they're being a bit standoffish about even sharing hints which is somewhat annoying. It's also apparent that all I had to work with were the first rev boards. This driver has been lightly tested on intel && alpha, but only point-to-point. There may be some issues with switches- use of boot time environment variables that override EEPROM settings (e.g., 'set wx_ilos=1' which inverts the sense of optical signal loss) may help with this. I had this out for review for three weeks, and nobody said anything negative or positive, ergo, this checkin has no 'reviewed by' field which I would have preferred.
2000-01-04 11:12:42 +00:00
}
Several things: 1. Pick up MII/PHY support for Livengood copper part (10/100/1000) from Parag Patel. It was a fairly complete but not quite platform independent job. 2. Finish silly offset differences that LIVENGOOD vs. WISEMAN registers have (so the !)$*!)$*!$ fiber LIVENGOOD now works too). 3. Ansify the source. So- we now suppor tthe PRO1000F and PRO1000T adapters.
2001-04-09 21:54:15 +00:00
#define RAISE_CLOCK(sc, dcr) \
WRITE_CSR(sc, WXREG_DCR, (dcr) | WXPHY_MDC), DELAY(2)
#define LOWER_CLOCK(sc, dcr) \
WRITE_CSR(sc, WXREG_DCR, (dcr) & ~WXPHY_MDC), DELAY(2)
static u_int32_t
wx_mii_shift_in(wx_softc_t *sc)
{
u_int32_t dcr, i;
u_int32_t data = 0;
dcr = READ_CSR(sc, WXREG_DCR);
dcr &= ~(WXPHY_MDIO_DIR | WXPHY_MDIO);
WRITE_CSR(sc, WXREG_DCR, dcr);
RAISE_CLOCK(sc, dcr);
LOWER_CLOCK(sc, dcr);
for (i = 0; i < 16; i++) {
data <<= 1;
RAISE_CLOCK(sc, dcr);
dcr = READ_CSR(sc, WXREG_DCR);
if (dcr & WXPHY_MDIO)
data |= 1;
LOWER_CLOCK(sc, dcr);
}
RAISE_CLOCK(sc, dcr);
LOWER_CLOCK(sc, dcr);
return (data);
}
static void
wx_mii_shift_out(wx_softc_t *sc, u_int32_t data, u_int32_t count)
{
u_int32_t dcr, mask;
dcr = READ_CSR(sc, WXREG_DCR);
dcr |= WXPHY_MDIO_DIR | WXPHY_MDC_DIR;
for (mask = (1 << (count - 1)); mask; mask >>= 1) {
if (data & mask)
dcr |= WXPHY_MDIO;
else
dcr &= ~WXPHY_MDIO;
WRITE_CSR(sc, WXREG_DCR, dcr);
DELAY(2);
RAISE_CLOCK(sc, dcr);
LOWER_CLOCK(sc, dcr);
}
}
static int
wx_miibus_readreg(void *arg, int phy, int reg)
{
wx_softc_t *sc = WX_SOFTC_FROM_MII_ARG(arg);
unsigned int data = 0;
if (!IS_LIVENGOOD_CU(sc)) {
return 0;
}
wx_mii_shift_out(sc, WXPHYC_PREAMBLE, WXPHYC_PREAMBLE_LEN);
wx_mii_shift_out(sc, reg | (phy << 5) | (WXPHYC_READ << 10) |
(WXPHYC_SOF << 12), 14);
data = wx_mii_shift_in(sc);
return (data & WXMDIC_DATA_MASK);
}
static int
wx_miibus_writereg(void *arg, int phy, int reg, int data)
{
wx_softc_t *sc = WX_SOFTC_FROM_MII_ARG(arg);
if (!IS_LIVENGOOD_CU(sc)) {
return 0;
}
wx_mii_shift_out(sc, WXPHYC_PREAMBLE, WXPHYC_PREAMBLE_LEN);
wx_mii_shift_out(sc, (u_int32_t)data | (WXPHYC_TURNAROUND << 16) |
(reg << 18) | (phy << 23) | (WXPHYC_WRITE << 28) |
(WXPHYC_SOF << 30), 32);
return (0);
}
static void
wx_miibus_statchg(void *arg)
{
wx_softc_t *sc = WX_SOFTC_FROM_MII_ARG(arg);
mii_data_t *mii = sc->wx_mii;
u_int32_t dcr, tctl;
if (mii == NULL)
return;
dcr = sc->wx_dcr;
tctl = READ_CSR(sc, WXREG_TCTL);
DPRINTF(sc, ("%s: statchg dcr=%#x tctl=%#x", sc->wx_name, dcr, tctl));
dcr |= WXDCR_FRCSPD | WXDCR_FRCDPX | WXDCR_SLU;
dcr &= ~(WXDCR_SPEED_MASK | WXDCR_ASDE /* | WXDCR_ILOS */);
if (mii->mii_media_status & IFM_ACTIVE) {
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_NONE) {
DPRINTF(sc, (" link-down\n"));
sc->linkup = 0;
return;
}
sc->linkup = 1;
}
if (IFM_SUBTYPE(mii->mii_media_active) == IFM_1000_TX) {
DPRINTF(sc, (" 1000TX"));
dcr |= WXDCR_1000BT;
} else if (IFM_SUBTYPE(mii->mii_media_active) == IFM_100_TX) {
DPRINTF(sc, (" 100TX"));
dcr |= WXDCR_100BT;
} else /* assume IFM_10_TX */ {
DPRINTF(sc, (" 10TX"));
dcr |= WXDCR_10BT;
}
if (mii->mii_media_active & IFM_FDX) {
DPRINTF(sc, ("-FD"));
tctl = WXTCTL_CT(WX_COLLISION_THRESHOLD) |
WXTCTL_COLD(WX_FDX_COLLISION_DX) | WXTCTL_EN;
dcr |= WXDCR_FD;
} else {
DPRINTF(sc, ("-HD"));
tctl = WXTCTL_CT(WX_COLLISION_THRESHOLD) |
WXTCTL_COLD(WX_HDX_COLLISION_DX) | WXTCTL_EN;
dcr &= ~WXDCR_FD;
}
/* FLAG0==rx-flow-control FLAG1==tx-flow-control */
if (mii->mii_media_active & IFM_FLAG0) {
dcr |= WXDCR_RFCE;
} else {
dcr &= ~WXDCR_RFCE;
}
if (mii->mii_media_active & IFM_FLAG1) {
dcr |= WXDCR_TFCE;
} else {
dcr &= ~WXDCR_TFCE;
}
if (dcr & (WXDCR_RFCE|WXDCR_TFCE)) {
WRITE_CSR(sc, WXREG_FCAL, FC_FRM_CONST_LO);
WRITE_CSR(sc, WXREG_FCAH, FC_FRM_CONST_HI);
WRITE_CSR(sc, WXREG_FCT, FC_TYP_CONST);
} else {
WRITE_CSR(sc, WXREG_FCAL, 0);
WRITE_CSR(sc, WXREG_FCAH, 0);
WRITE_CSR(sc, WXREG_FCT, 0);
}
DPRINTF(sc, (" dcr=%#x tctl=%#x\n", dcr, tctl));
WRITE_CSR(sc, WXREG_TCTL, tctl);
sc->wx_dcr = dcr;
WRITE_CSR(sc, WXREG_DCR, dcr);
}
static void
wx_miibus_mediainit(void *arg)
{
}
Reference in New Issue Copy Permalink