freebsd-dev/sys/amd64/conf/GENERIC

#
# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
#
#	$Id: GENERIC,v 1.52 1995/11/29 20:07:46 nate Exp $
#

machine		"i386"
cpu		"I386_CPU"
cpu		"I486_CPU"
cpu		"I586_CPU"
ident		GENERIC
maxusers	10

options		MATH_EMULATE		#Support for x87 emulation
options		INET			#InterNETworking
options		FFS			#Berkeley Fast Filesystem
options		NFS			#Network Filesystem
options		MSDOSFS			#MSDOS Filesystem
options		"CD9660"		#ISO 9660 Filesystem
options		PROCFS			#Process filesystem
options		"COMPAT_43"		#Compatible with BSD 4.3
options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
options		UCONSOLE		#Allow users to grab the console

config		kernel	root on wd0

controller	isa0
controller	eisa0
controller	pci0

controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
disk		fd0	at fdc0 drive 0
disk		fd1	at fdc0 drive 1
tape		ft0	at fdc0 drive 2

controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
disk		wd0	at wdc0 drive 0
disk		wd1	at wdc0 drive 1

controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
disk		wd2	at wdc1 drive 0
disk		wd3	at wdc1 drive 1

options		ATAPI	#Enable ATAPI support for IDE bus
device		wcd0	#IDE CD-ROM

controller	ncr0
controller	ahb0
controller	ahc0
controller	ahc1

controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
controller	aic0	at isa? port 0x340 bio irq 11 vector aicintr
controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr

controller	scbus0

device		sd0

device		od0

device		st0

device		cd0	#Only need one of these, the code dynamically grows

device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr

controller	matcd0	at isa? port 0x230 bio

device		scd0	at isa? port 0x230 bio

# syscons is the default console driver, resembling an SCO console
device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD >= 2.0.5
#options		XSERVER			# include code for XFree86
#options		FAT_CURSOR		# start with block cursor
# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines
#options		"PCVT_SCANSET=2"	# IBM keyboards are non-std

device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr

device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr

device		lpt0	at isa? port? tty irq 7 vector lptintr
device		lpt1	at isa? port? tty
device		lpt2	at isa? port? tty

# Order is important here due to intrusive probes, do *not* alphabetize
# this list of network interfaces until the probes have been fixed.
# Right now it appears that the ie0 must be probed before ep0. See
# revision 1.20 of this file.
device de0
device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
device ep0 at isa? port 0x300 net irq 10 vector epintr
device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr

pseudo-device	loop
pseudo-device	ether
pseudo-device	log
pseudo-device	sl	1
# ijppp uses tun instead of ppp device
#pseudo-device	ppp	1
pseudo-device	tun	1
pseudo-device	pty	16
pseudo-device	gzip		# Exec gzipped a.out's
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`#`
Cosmetic changes in comment at start (it's no longer a GENERICAH config file!) 1994-11-03 01:46:59 +00:00			`# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`#`
Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`# $Id: GENERIC,v 1.52 1995/11/29 20:07:46 nate Exp $`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`#`

			`machine "i386"`
			`cpu "I386_CPU"`
			`cpu "I486_CPU"`
			`cpu "I586_CPU"`
			`ident GENERIC`
			`maxusers 10`

			`options MATH_EMULATE #Support for x87 emulation`
			`options INET #InterNETworking`
We need CD9660 and MSDOS filesystems built-in if the floppy is to have a hope of getting at these types of filesystems without dragging all the LKM stuff in. 1994-11-05 07:38:50 +00:00			`options FFS #Berkeley Fast Filesystem`
			`options NFS #Network Filesystem`
			`options MSDOSFS #MSDOS Filesystem`
Argh! Missing quotes. 1994-11-05 07:41:08 +00:00			`options "CD9660" #ISO 9660 Filesystem`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`options PROCFS #Process filesystem`
			`options "COMPAT_43" #Compatible with BSD 4.3`
			`options "SCSI_DELAY=15" #Be pessimistic about Joe SCSI device`
			`options BOUNCE_BUFFERS #include support for DMA bounce buffers`
Put UCONSOLE back - I was wrong, it's still used in one last place. Submitted by: ollivier 1995-01-14 02:39:22 +00:00			`options UCONSOLE #Allow users to grab the console`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00
Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`config kernel root on wd0`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00
			`controller isa0`
Add eisa0 and remove ISA configuration line for ahc0. 1995-11-05 17:02:54 +00:00			`controller eisa0`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`controller pci0`

			`controller fdc0 at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr`
			`disk fd0 at fdc0 drive 0`
			`disk fd1 at fdc0 drive 1`
Enable floppy-tape support. 1994-11-10 23:46:31 +00:00			`tape ft0 at fdc0 drive 2`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00
			`controller wdc0 at isa? port "IO_WD1" bio irq 14 vector wdintr`
			`disk wd0 at wdc0 drive 0`
			`disk wd1 at wdc0 drive 1`

			`controller wdc1 at isa? port "IO_WD2" bio irq 15 vector wdintr`
			`disk wd2 at wdc1 drive 0`
			`disk wd3 at wdc1 drive 1`

Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`options ATAPI #Enable ATAPI support for IDE bus`
			`device wcd0 #IDE CD-ROM`
Bring in Serge Vakulenko's IDE CDROM (ATAPI) driver. A number of people have now indicated to me that it's working more than well enough to bring into -current. Submitted by: Serge Vakulenko <vak@cronyx.ru> 1995-08-18 11:26:35 +00:00
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`controller ncr0`
Change ahb device line to eisaconf syntax. 1995-11-09 22:47:05 +00:00			`controller ahb0`
Add in aic7770.c (EISA/VL Adaptors) and aic7870.c (PCI adaptor) dependancies for the ahc driver. 1995-01-13 02:23:27 +00:00			`controller ahc0`
Add eisa0 and remove ISA configuration line for ahc0. 1995-11-05 17:02:54 +00:00			`controller ahc1`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00
According to a quick reading of sources, one experiment and Bruce's word: aha, ahb and bt all on "irq ?" now. 1994-10-20 00:53:30 +00:00			`controller bt0 at isa? port "IO_BT0" bio irq ? vector btintr`
New device-driver entries for the aic7770 driver. These use new features of config so YOU MUST RECOMPILE CONFIG. Modifying config was the cleanest solution to integrating this driver into the tree which will become more obvious in the next commit. 1994-11-17 20:20:54 +00:00			`controller uha0 at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr`
According to a quick reading of sources, one experiment and Bruce's word: aha, ahb and bt all on "irq ?" now. 1994-10-20 00:53:30 +00:00			`controller aha0 at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr`
Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`controller aic0 at isa? port 0x340 bio irq 11 vector aicintr`
New and far better NCR5380/NCR53400 scsi-driver. Handles at least Trantor T130 and ProAudioSpectrum adapters. The pas driver has consequently been removed. This driver can be configured without without interrupts. Manpage to follow when PAS16 has been edited in. Reviewed by: phk Submitted by: Serge Vakulenko, <vak@cronyx.ru> 1995-01-27 07:49:19 +00:00			`controller nca0 at isa? port 0x1f88 bio irq 10 vector ncaintr`
			`controller nca1 at isa? port 0x350 bio irq 5 vector ncaintr`
Added sea0 - Seagate driver lines to config 1994-10-24 22:18:12 +00:00			`controller sea0 at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr`
Put UCONSOLE back - I was wrong, it's still used in one last place. Submitted by: ollivier 1995-01-14 02:39:22 +00:00
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`controller scbus0`

			`device sd0`

Include the "od" driver. 1995-10-31 17:00:03 +00:00			`device od0`

GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`device st0`

			`device cd0 #Only need one of these, the code dynamically grows`

			`device wt0 at isa? port 0x300 bio irq 5 drq 1 vector wtintr`
			`device mcd0 at isa? port 0x300 bio irq 10 vector mcdintr`
			`device mcd1 at isa? port 0x340 bio irq 11 vector mcdintr`

Stable matcd port to 0x230, as per request by Bruce and Frank. Submitted by: Frank Durda IV <uhclem@fw.ast.com> 1995-10-25 16:43:01 +00:00			`controller matcd0 at isa? port 0x230 bio`
Changes to incorporate the Matsushita CDROM driver (otherwise known as the "Sound blaster CDROM"). Submitted by: Frank Durda IV <bsdmail@nemesis.lonestar.org> 1995-03-02 04:07:03 +00:00
Add soundblaster CD to generic kernel. Hope this doesn't run us out of space! 1995-01-28 05:01:43 +00:00			`device scd0 at isa? port 0x230 bio`

Include three lines about the pcvt console driver, so we don't ever need a different config file for it. 1995-02-15 20:38:36 +00:00			`# syscons is the default console driver, resembling an SCO console`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`device sc0 at isa? port "IO_KBD" tty irq 1 vector scintr`
Include three lines about the pcvt console driver, so we don't ever need a different config file for it. 1995-02-15 20:38:36 +00:00			`# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver`
			`#device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint`
Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD >= 2.0.5`
pcvt is still using the XSERVER option; document this. 1995-03-05 22:23:35 +00:00			`#options XSERVER # include code for XFree86`
Added pcvt option FAT_CURSOR. Fixed comment about PCVT_VERSION=210. Fixed tabs and trailing blanks. 1995-12-10 22:14:15 +00:00			`#options FAT_CURSOR # start with block cursor`
GENERIC - Add a commented out line for adding support for IBM ThinkPad keyboards LINT - Add SCANSET=2 support to the LINT kernel and comments reflecting it's purpose. 1995-11-29 20:07:49 +00:00			`# If you have a ThinkPAD, uncomment this along with the rest of the PCVT lines`
			`#options "PCVT_SCANSET=2" # IBM keyboards are non-std`
Include three lines about the pcvt console driver, so we don't ever need a different config file for it. 1995-02-15 20:38:36 +00:00
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`device npx0 at isa? port "IO_NPX" irq 13 vector npxintr`

			`device sio0 at isa? port "IO_COM1" tty irq 4 vector siointr`
			`device sio1 at isa? port "IO_COM2" tty irq 3 vector siointr`
			`device sio2 at isa? port "IO_COM3" tty irq 5 vector siointr`
			`device sio3 at isa? port "IO_COM4" tty irq 9 vector siointr`

			`device lpt0 at isa? port? tty irq 7 vector lptintr`
			`device lpt1 at isa? port? tty`
			`device lpt2 at isa? port? tty`

Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00			`# Order is important here due to intrusive probes, do not alphabetize`
			`# this list of network interfaces until the probes have been fixed.`
			`# Right now it appears that the ie0 must be probed before ep0. See`
			`# revision 1.20 of this file.`
Added 'de' ethernet driver. 1994-11-11 05:48:49 +00:00			`device de0`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr`
			`device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr`
			`device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr`
Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00			`device ep0 at isa? port 0x300 net irq 10 vector epintr`
Submitted by: Mahesh Neelakanta <mahesh@gcomm.com> Change I/O address of Intel EtherExpress driver (ix0) from 0x280 to 0x300. 1995-03-30 00:20:08 +00:00			`device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr`
I got that wrong, lnc0 @ 0x280 lnc1 @ 0x300 moved le0 into sorted sequence. 1995-04-10 19:13:51 +00:00			`device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr`
lnc0 is @ 0x300 lnc1 is @ 0x280 1995-04-10 19:12:29 +00:00			`device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr`
			`device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr`
Add back ze0 driver; somebody took it out of _both_ LINT and GENERIC, kinda hosing the laptop folks. 1994-11-08 07:39:28 +00:00			`device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr`
Added the "eg0" interface driver for the 3Com "3c505" or "etherlink/+" card. This is the braindamaged card with the 80186 CPU on it. It is slow, probably not very good after all, but hey, if you have one lying around doing nothing anyway... Added the "zp0" driver to GENERIC. 1995-04-08 09:36:04 +00:00			`device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00
			`pseudo-device loop`
			`pseudo-device ether`
			`pseudo-device log`
Add PPP to the generic kernel. Now that Poul has made us all this space, maybe I can get us back into the slip/ppp game without having to tell users to reconfigure their kernels all the time! :) 1995-02-09 11:21:07 +00:00			`pseudo-device sl 1`
Merge RELENG_2_0_5 into HEAD 1995-06-11 19:33:05 +00:00			`# ijppp uses tun instead of ppp device`
			`#pseudo-device ppp 1`
			`pseudo-device tun 1`
GENERIC is our new all singing and dancing kernel. Please report ASAP if there is anything GENERICAH or GENERICBT can, which this one cannot. MINI changed to reflect the SCSI-pecking-order. 1994-10-17 21:10:20 +00:00			`pseudo-device pty 16`
			`pseudo-device gzip # Exec gzipped a.out's`