freebsd-dev/sys/arm/allwinner/console.c

/*-
 * Copyright (c) 2012 Ganbold Tsagaankhuu <ganbold@gmail.com>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1.	Redistributions of source code must retain the above copyright
 *	notice, this list of conditions and the following disclaimer.
 * 2.	Redistributions in binary form must reproduce the above copyright
 *	notice, this list of conditions and the following disclaimer in the
 *	documentation and/or other materials provided with the distribution.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 * SUCH DAMAGE.
 */

/* Simple UART console driver for Allwinner A10 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/cons.h>
#include <sys/consio.h>
#include <sys/kernel.h>

#ifndef	A10_UART_BASE
#define	A10_UART_BASE	0xe1c28000 	/* UART0 */
#endif

int reg_shift = 2;

#define UART_DLL        0       /* Out: Divisor Latch Low */
#define UART_DLM        1       /* Out: Divisor Latch High */
#define UART_FCR        2       /* Out: FIFO Control Register */
#define UART_LCR        3       /* Out: Line Control Register */
#define UART_MCR        4       /* Out: Modem Control Register */
#define UART_LSR        5       /* In:  Line Status Register */
#define UART_LSR_THRE   0x20    /* Transmit-hold-register empty */
#define UART_LSR_DR     0x01    /* Receiver data ready */
#define UART_MSR        6       /* In:  Modem Status Register */
#define UART_SCR        7       /* I/O: Scratch Register */


/*
 * uart related funcs
 */
static u_int32_t
uart_getreg(u_int32_t *bas)
{
	return *((volatile u_int32_t *)(bas)) & 0xff;
}

static void
uart_setreg(u_int32_t *bas, u_int32_t val)
{
	*((volatile u_int32_t *)(bas)) = (u_int32_t)val;
}

static int
ub_getc(void)
{
	while ((uart_getreg((u_int32_t *)(A10_UART_BASE + 
	    (UART_LSR << reg_shift))) & UART_LSR_DR) == 0);
		__asm __volatile("nop");

	return (uart_getreg((u_int32_t *)A10_UART_BASE) & 0xff);
}

static void
ub_putc(unsigned char c)
{
	if (c == '\n')
		ub_putc('\r');

	while ((uart_getreg((u_int32_t *)(A10_UART_BASE + 
	    (UART_LSR << reg_shift))) & UART_LSR_THRE) == 0)
		__asm __volatile("nop");

	uart_setreg((u_int32_t *)A10_UART_BASE, c);
}

static cn_probe_t	uart_cnprobe;
static cn_init_t	uart_cninit;
static cn_term_t	uart_cnterm;
static cn_getc_t	uart_cngetc;
static cn_putc_t	uart_cnputc;
static cn_grab_t	uart_cngrab;
static cn_ungrab_t	uart_cnungrab;

static void
uart_cngrab(struct consdev *cp)
{
}

static void
uart_cnungrab(struct consdev *cp)
{
}


static void
uart_cnprobe(struct consdev *cp)
{
	sprintf(cp->cn_name, "uart");
	cp->cn_pri = CN_NORMAL;
}

static void
uart_cninit(struct consdev *cp)
{
	uart_setreg((u_int32_t *)(A10_UART_BASE + 
	    (UART_FCR << reg_shift)), 0x06);
}

void
uart_cnputc(struct consdev *cp, int c)
{
	ub_putc(c);
}

int
uart_cngetc(struct consdev * cp)
{
	return ub_getc();
}

static void
uart_cnterm(struct consdev * cp)
{
}

CONSOLE_DRIVER(uart);