freebsd-dev/sys/netinet/in.c

1699 lines
44 KiB
C
Raw Normal View History

/*-
* SPDX-License-Identifier: BSD-3-Clause
*
1994-05-24 10:09:53 +00:00
* Copyright (c) 1982, 1986, 1991, 1993
* The Regents of the University of California. All rights reserved.
* Copyright (C) 2001 WIDE Project. All rights reserved.
1994-05-24 10:09:53 +00:00
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of the University nor the names of its contributors
1994-05-24 10:09:53 +00:00
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* @(#)in.c 8.4 (Berkeley) 1/9/95
1994-05-24 10:09:53 +00:00
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
1994-05-24 10:09:53 +00:00
#include <sys/param.h>
#include <sys/eventhandler.h>
#include <sys/systm.h>
#include <sys/sockio.h>
1994-05-24 10:09:53 +00:00
#include <sys/malloc.h>
#include <sys/priv.h>
1994-05-24 10:09:53 +00:00
#include <sys/socket.h>
#include <sys/jail.h>
1995-12-09 20:43:53 +00:00
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/proc.h>
#include <sys/rmlock.h>
1995-12-09 20:43:53 +00:00
#include <sys/sysctl.h>
#include <sys/syslog.h>
#include <sys/sx.h>
1994-05-24 10:09:53 +00:00
#include <net/if.h>
#include <net/if_var.h>
#include <net/if_arp.h>
#include <net/if_dl.h>
#include <net/if_llatbl.h>
#include <net/if_types.h>
1994-05-24 10:09:53 +00:00
#include <net/route.h>
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
#include <net/route/nhop.h>
#include <net/route/route_ctl.h>
#include <net/vnet.h>
1994-05-24 10:09:53 +00:00
#include <netinet/if_ether.h>
1994-05-24 10:09:53 +00:00
#include <netinet/in.h>
#include <netinet/in_var.h>
#include <netinet/in_pcb.h>
Import rewrite of IPv4 socket multicast layer to support source-specific and protocol-independent host mode multicast. The code is written to accomodate IPv6, IGMPv3 and MLDv2 with only a little additional work. This change only pertains to FreeBSD's use as a multicast end-station and does not concern multicast routing; for an IGMPv3/MLDv2 router implementation, consider the XORP project. The work is based on Wilbert de Graaf's IGMPv3 code drop for FreeBSD 4.6, which is available at: http://www.kloosterhof.com/wilbert/igmpv3.html Summary * IPv4 multicast socket processing is now moved out of ip_output.c into a new module, in_mcast.c. * The in_mcast.c module implements the IPv4 legacy any-source API in terms of the protocol-independent source-specific API. * Source filters are lazy allocated as the common case does not use them. They are part of per inpcb state and are covered by the inpcb lock. * struct ip_mreqn is now supported to allow applications to specify multicast joins by interface index in the legacy IPv4 any-source API. * In UDP, an incoming multicast datagram only requires that the source port matches the 4-tuple if the socket was already bound by source port. An unbound socket SHOULD be able to receive multicasts sent from an ephemeral source port. * The UDP socket multicast filter mode defaults to exclusive, that is, sources present in the per-socket list will be blocked from delivery. * The RFC 3678 userland functions have been added to libc: setsourcefilter, getsourcefilter, setipv4sourcefilter, getipv4sourcefilter. * Definitions for IGMPv3 are merged but not yet used. * struct sockaddr_storage is now referenced from <netinet/in.h>. It is therefore defined there if not already declared in the same way as for the C99 types. * The RFC 1724 hack (specify 0.0.0.0/8 addresses to IP_MULTICAST_IF which are then interpreted as interface indexes) is now deprecated. * A patch for the Rhyolite.com routed in the FreeBSD base system is available in the -net archives. This only affects individuals running RIPv1 or RIPv2 via point-to-point and/or unnumbered interfaces. * Make IPv6 detach path similar to IPv4's in code flow; functionally same. * Bump __FreeBSD_version to 700048; see UPDATING. This work was financially supported by another FreeBSD committer. Obtained from: p4://bms_netdev Submitted by: Wilbert de Graaf (original work) Reviewed by: rwatson (locking), silence from fenner, net@ (but with encouragement)
2007-06-12 16:24:56 +00:00
#include <netinet/ip_var.h>
#include <netinet/ip_carp.h>
#include <netinet/igmp_var.h>
Build on Jeff Roberson's linker-set based dynamic per-CPU allocator (DPCPU), as suggested by Peter Wemm, and implement a new per-virtual network stack memory allocator. Modify vnet to use the allocator instead of monolithic global container structures (vinet, ...). This change solves many binary compatibility problems associated with VIMAGE, and restores ELF symbols for virtualized global variables. Each virtualized global variable exists as a "reference copy", and also once per virtual network stack. Virtualized global variables are tagged at compile-time, placing the in a special linker set, which is loaded into a contiguous region of kernel memory. Virtualized global variables in the base kernel are linked as normal, but those in modules are copied and relocated to a reserved portion of the kernel's vnet region with the help of a the kernel linker. Virtualized global variables exist in per-vnet memory set up when the network stack instance is created, and are initialized statically from the reference copy. Run-time access occurs via an accessor macro, which converts from the current vnet and requested symbol to a per-vnet address. When "options VIMAGE" is not compiled into the kernel, normal global ELF symbols will be used instead and indirection is avoided. This change restores static initialization for network stack global variables, restores support for non-global symbols and types, eliminates the need for many subsystem constructors, eliminates large per-subsystem structures that caused many binary compatibility issues both for monitoring applications (netstat) and kernel modules, removes the per-function INIT_VNET_*() macros throughout the stack, eliminates the need for vnet_symmap ksym(2) munging, and eliminates duplicate definitions of virtualized globals under VIMAGE_GLOBALS. Bump __FreeBSD_version and update UPDATING. Portions submitted by: bz Reviewed by: bz, zec Discussed with: gnn, jamie, jeff, jhb, julian, sam Suggested by: peter Approved by: re (kensmith)
2009-07-14 22:48:30 +00:00
#include <netinet/udp.h>
#include <netinet/udp_var.h>
2013-11-06 19:46:20 +00:00
static int in_aifaddr_ioctl(u_long, caddr_t, struct ifnet *, struct thread *);
static int in_difaddr_ioctl(u_long, caddr_t, struct ifnet *, struct thread *);
static int in_gifaddr_ioctl(u_long, caddr_t, struct ifnet *, struct thread *);
2002-03-19 21:25:46 +00:00
static void in_socktrim(struct sockaddr_in *);
static void in_purgemaddrs(struct ifnet *);
1994-05-24 10:09:53 +00:00
static bool ia_need_loopback_route(const struct in_ifaddr *);
VNET_DEFINE_STATIC(int, nosameprefix);
#define V_nosameprefix VNET(nosameprefix)
SYSCTL_INT(_net_inet_ip, OID_AUTO, no_same_prefix, CTLFLAG_VNET | CTLFLAG_RW,
&VNET_NAME(nosameprefix), 0,
"Refuse to create same prefixes on different interfaces");
VNET_DECLARE(struct inpcbinfo, ripcbinfo);
#define V_ripcbinfo VNET(ripcbinfo)
static struct sx in_control_sx;
SX_SYSINIT(in_control_sx, &in_control_sx, "in_control");
1994-05-24 10:09:53 +00:00
/*
* Return 1 if an internet address is for a ``local'' host
* (one to which we have a connection).
1994-05-24 10:09:53 +00:00
*/
int
in_localaddr(struct in_addr in)
1994-05-24 10:09:53 +00:00
{
struct rm_priotracker in_ifa_tracker;
u_long i = ntohl(in.s_addr);
struct in_ifaddr *ia;
1994-05-24 10:09:53 +00:00
IN_IFADDR_RLOCK(&in_ifa_tracker);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ia, &V_in_ifaddrhead, ia_link) {
if ((i & ia->ia_subnetmask) == ia->ia_subnet) {
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (1);
}
1994-05-24 10:09:53 +00:00
}
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
1994-05-24 10:09:53 +00:00
return (0);
}
/*
* Return 1 if an internet address is for the local host and configured
* on one of its interfaces.
*/
int
in_localip(struct in_addr in)
{
struct rm_priotracker in_ifa_tracker;
struct in_ifaddr *ia;
IN_IFADDR_RLOCK(&in_ifa_tracker);
LIST_FOREACH(ia, INADDR_HASH(in.s_addr), ia_hash) {
if (IA_SIN(ia)->sin_addr.s_addr == in.s_addr) {
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (1);
}
}
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (0);
}
/*
* Return 1 if an internet address is configured on an interface.
*/
int
in_ifhasaddr(struct ifnet *ifp, struct in_addr in)
{
struct ifaddr *ifa;
struct in_ifaddr *ia;
Widen NET_EPOCH coverage. When epoch(9) was introduced to network stack, it was basically dropped in place of existing locking, which was mutexes and rwlocks. For the sake of performance mutex covered areas were as small as possible, so became epoch covered areas. However, epoch doesn't introduce any contention, it just delays memory reclaim. So, there is no point to minimise epoch covered areas in sense of performance. Meanwhile entering/exiting epoch also has non-zero CPU usage, so doing this less often is a win. Not the least is also code maintainability. In the new paradigm we can assume that at any stage of processing a packet, we are inside network epoch. This makes coding both input and output path way easier. On output path we already enter epoch quite early - in the ip_output(), in the ip6_output(). This patch does the same for the input path. All ISR processing, network related callouts, other ways of packet injection to the network stack shall be performed in net_epoch. Any leaf function that walks network configuration now asserts epoch. Tricky part is configuration code paths - ioctls, sysctls. They also call into leaf functions, so some need to be changed. This patch would introduce more epoch recursions (see EPOCH_TRACE) than we had before. They will be cleaned up separately, as several of them aren't trivial. Note, that unlike a lock recursion the epoch recursion is safe and just wastes a bit of resources. Reviewed by: gallatin, hselasky, cy, adrian, kristof Differential Revision: https://reviews.freebsd.org/D19111
2019-10-07 22:40:05 +00:00
NET_EPOCH_ASSERT();
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
ia = (struct in_ifaddr *)ifa;
Widen NET_EPOCH coverage. When epoch(9) was introduced to network stack, it was basically dropped in place of existing locking, which was mutexes and rwlocks. For the sake of performance mutex covered areas were as small as possible, so became epoch covered areas. However, epoch doesn't introduce any contention, it just delays memory reclaim. So, there is no point to minimise epoch covered areas in sense of performance. Meanwhile entering/exiting epoch also has non-zero CPU usage, so doing this less often is a win. Not the least is also code maintainability. In the new paradigm we can assume that at any stage of processing a packet, we are inside network epoch. This makes coding both input and output path way easier. On output path we already enter epoch quite early - in the ip_output(), in the ip6_output(). This patch does the same for the input path. All ISR processing, network related callouts, other ways of packet injection to the network stack shall be performed in net_epoch. Any leaf function that walks network configuration now asserts epoch. Tricky part is configuration code paths - ioctls, sysctls. They also call into leaf functions, so some need to be changed. This patch would introduce more epoch recursions (see EPOCH_TRACE) than we had before. They will be cleaned up separately, as several of them aren't trivial. Note, that unlike a lock recursion the epoch recursion is safe and just wastes a bit of resources. Reviewed by: gallatin, hselasky, cy, adrian, kristof Differential Revision: https://reviews.freebsd.org/D19111
2019-10-07 22:40:05 +00:00
if (ia->ia_addr.sin_addr.s_addr == in.s_addr)
return (1);
}
return (0);
}
/*
* Return a reference to the interface address which is different to
* the supplied one but with same IP address value.
*/
static struct in_ifaddr *
in_localip_more(struct in_ifaddr *original_ia)
{
struct rm_priotracker in_ifa_tracker;
in_addr_t original_addr = IA_SIN(original_ia)->sin_addr.s_addr;
uint32_t original_fib = original_ia->ia_ifa.ifa_ifp->if_fib;
struct in_ifaddr *ia;
IN_IFADDR_RLOCK(&in_ifa_tracker);
LIST_FOREACH(ia, INADDR_HASH(original_addr), ia_hash) {
in_addr_t addr = IA_SIN(ia)->sin_addr.s_addr;
uint32_t fib = ia->ia_ifa.ifa_ifp->if_fib;
if (!V_rt_add_addr_allfibs && (original_fib != fib))
continue;
if ((original_ia != ia) && (original_addr == addr)) {
ifa_ref(&ia->ia_ifa);
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (ia);
}
}
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (NULL);
}
1994-05-24 10:09:53 +00:00
/*
* Determine whether an IP address is in a reserved set of addresses
* that may not be forwarded, or whether datagrams to that destination
* may be forwarded.
*/
int
in_canforward(struct in_addr in)
1994-05-24 10:09:53 +00:00
{
u_long i = ntohl(in.s_addr);
1994-05-24 10:09:53 +00:00
if (IN_EXPERIMENTAL(i) || IN_MULTICAST(i) || IN_LINKLOCAL(i) ||
IN_ZERONET(i) || IN_LOOPBACK(i))
1994-05-24 10:09:53 +00:00
return (0);
return (1);
}
/*
* Trim a mask in a sockaddr
*/
static void
in_socktrim(struct sockaddr_in *ap)
1994-05-24 10:09:53 +00:00
{
char *cplim = (char *) &ap->sin_addr;
char *cp = (char *) (&ap->sin_addr + 1);
1994-05-24 10:09:53 +00:00
ap->sin_len = 0;
while (--cp >= cplim)
if (*cp) {
1994-05-24 10:09:53 +00:00
(ap)->sin_len = cp - (char *) (ap) + 1;
break;
}
}
/*
* Generic internet control operations (ioctl's).
*/
int
in_control(struct socket *so, u_long cmd, caddr_t data, struct ifnet *ifp,
struct thread *td)
1994-05-24 10:09:53 +00:00
{
struct ifreq *ifr = (struct ifreq *)data;
struct sockaddr_in *addr = (struct sockaddr_in *)&ifr->ifr_addr;
struct epoch_tracker et;
struct ifaddr *ifa;
struct in_ifaddr *ia;
int error;
if (ifp == NULL)
return (EADDRNOTAVAIL);
1994-05-24 10:09:53 +00:00
/*
* Filter out 4 ioctls we implement directly. Forward the rest
* to specific functions and ifp->if_ioctl().
*/
switch (cmd) {
case SIOCGIFADDR:
case SIOCGIFBRDADDR:
case SIOCGIFDSTADDR:
case SIOCGIFNETMASK:
break;
case SIOCGIFALIAS:
sx_xlock(&in_control_sx);
error = in_gifaddr_ioctl(cmd, data, ifp, td);
sx_xunlock(&in_control_sx);
return (error);
case SIOCDIFADDR:
sx_xlock(&in_control_sx);
error = in_difaddr_ioctl(cmd, data, ifp, td);
sx_xunlock(&in_control_sx);
return (error);
2013-11-06 19:46:20 +00:00
case OSIOCAIFADDR: /* 9.x compat */
case SIOCAIFADDR:
sx_xlock(&in_control_sx);
2013-11-06 19:46:20 +00:00
error = in_aifaddr_ioctl(cmd, data, ifp, td);
sx_xunlock(&in_control_sx);
return (error);
case SIOCSIFADDR:
case SIOCSIFBRDADDR:
case SIOCSIFDSTADDR:
case SIOCSIFNETMASK:
/* We no longer support that old commands. */
return (EINVAL);
default:
if (ifp->if_ioctl == NULL)
return (EOPNOTSUPP);
return ((*ifp->if_ioctl)(ifp, cmd, data));
}
if (addr->sin_addr.s_addr != INADDR_ANY &&
prison_check_ip4(td->td_ucred, &addr->sin_addr) != 0)
return (EADDRNOTAVAIL);
1994-05-24 10:09:53 +00:00
/*
* Find address for this interface, if it exists. If an
* address was specified, find that one instead of the
* first one on the interface, if possible.
1994-05-24 10:09:53 +00:00
*/
NET_EPOCH_ENTER(et);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
ia = (struct in_ifaddr *)ifa;
if (ia->ia_addr.sin_addr.s_addr == addr->sin_addr.s_addr)
break;
}
if (ifa == NULL)
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link)
if (ifa->ifa_addr->sa_family == AF_INET) {
ia = (struct in_ifaddr *)ifa;
if (prison_check_ip4(td->td_ucred,
&ia->ia_addr.sin_addr) == 0)
break;
}
if (ifa == NULL) {
NET_EPOCH_EXIT(et);
return (EADDRNOTAVAIL);
}
1994-05-24 10:09:53 +00:00
error = 0;
1994-05-24 10:09:53 +00:00
switch (cmd) {
case SIOCGIFADDR:
*addr = ia->ia_addr;
1994-05-24 10:09:53 +00:00
break;
case SIOCGIFBRDADDR:
if ((ifp->if_flags & IFF_BROADCAST) == 0) {
error = EINVAL;
break;
}
*addr = ia->ia_broadaddr;
break;
1994-05-24 10:09:53 +00:00
case SIOCGIFDSTADDR:
if ((ifp->if_flags & IFF_POINTOPOINT) == 0) {
error = EINVAL;
break;
}
*addr = ia->ia_dstaddr;
break;
1994-05-24 10:09:53 +00:00
case SIOCGIFNETMASK:
*addr = ia->ia_sockmask;
break;
}
1994-05-24 10:09:53 +00:00
NET_EPOCH_EXIT(et);
return (error);
}
1994-05-24 10:09:53 +00:00
static int
2013-11-06 19:46:20 +00:00
in_aifaddr_ioctl(u_long cmd, caddr_t data, struct ifnet *ifp, struct thread *td)
{
const struct in_aliasreq *ifra = (struct in_aliasreq *)data;
const struct sockaddr_in *addr = &ifra->ifra_addr;
const struct sockaddr_in *broadaddr = &ifra->ifra_broadaddr;
const struct sockaddr_in *mask = &ifra->ifra_mask;
const struct sockaddr_in *dstaddr = &ifra->ifra_dstaddr;
2013-11-06 19:46:20 +00:00
const int vhid = (cmd == SIOCAIFADDR) ? ifra->ifra_vhid : 0;
struct epoch_tracker et;
struct ifaddr *ifa;
struct in_ifaddr *ia;
bool iaIsFirst;
int error = 0;
error = priv_check(td, PRIV_NET_ADDIFADDR);
if (error)
return (error);
/*
* ifra_addr must be present and be of INET family.
* ifra_broadaddr/ifra_dstaddr and ifra_mask are optional.
*/
if (addr->sin_len != sizeof(struct sockaddr_in) ||
addr->sin_family != AF_INET)
return (EINVAL);
if (broadaddr->sin_len != 0 &&
(broadaddr->sin_len != sizeof(struct sockaddr_in) ||
broadaddr->sin_family != AF_INET))
return (EINVAL);
if (mask->sin_len != 0 &&
(mask->sin_len != sizeof(struct sockaddr_in) ||
mask->sin_family != AF_INET))
return (EINVAL);
if ((ifp->if_flags & IFF_POINTOPOINT) &&
(dstaddr->sin_len != sizeof(struct sockaddr_in) ||
dstaddr->sin_addr.s_addr == INADDR_ANY))
return (EDESTADDRREQ);
if (vhid != 0 && carp_attach_p == NULL)
return (EPROTONOSUPPORT);
/*
* See whether address already exist.
*/
iaIsFirst = true;
ia = NULL;
NET_EPOCH_ENTER(et);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
struct in_ifaddr *it;
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
it = (struct in_ifaddr *)ifa;
if (it->ia_addr.sin_addr.s_addr == addr->sin_addr.s_addr &&
prison_check_ip4(td->td_ucred, &addr->sin_addr) == 0)
ia = it;
else
iaIsFirst = false;
}
NET_EPOCH_EXIT(et);
if (ia != NULL)
(void )in_difaddr_ioctl(cmd, data, ifp, td);
ifa = ifa_alloc(sizeof(struct in_ifaddr), M_WAITOK);
ia = (struct in_ifaddr *)ifa;
ifa->ifa_addr = (struct sockaddr *)&ia->ia_addr;
ifa->ifa_dstaddr = (struct sockaddr *)&ia->ia_dstaddr;
ifa->ifa_netmask = (struct sockaddr *)&ia->ia_sockmask;
callout_init_rw(&ia->ia_garp_timer, &ifp->if_addr_lock,
CALLOUT_RETURNUNLOCKED);
ia->ia_ifp = ifp;
ia->ia_addr = *addr;
if (mask->sin_len != 0) {
ia->ia_sockmask = *mask;
ia->ia_subnetmask = ntohl(ia->ia_sockmask.sin_addr.s_addr);
} else {
in_addr_t i = ntohl(addr->sin_addr.s_addr);
/*
* Be compatible with network classes, if netmask isn't
* supplied, guess it based on classes.
*/
if (IN_CLASSA(i))
ia->ia_subnetmask = IN_CLASSA_NET;
else if (IN_CLASSB(i))
ia->ia_subnetmask = IN_CLASSB_NET;
else
ia->ia_subnetmask = IN_CLASSC_NET;
ia->ia_sockmask.sin_addr.s_addr = htonl(ia->ia_subnetmask);
}
ia->ia_subnet = ntohl(addr->sin_addr.s_addr) & ia->ia_subnetmask;
in_socktrim(&ia->ia_sockmask);
1994-05-24 10:09:53 +00:00
if (ifp->if_flags & IFF_BROADCAST) {
if (broadaddr->sin_len != 0) {
ia->ia_broadaddr = *broadaddr;
} else if (ia->ia_subnetmask == IN_RFC3021_MASK) {
ia->ia_broadaddr.sin_addr.s_addr = INADDR_BROADCAST;
ia->ia_broadaddr.sin_len = sizeof(struct sockaddr_in);
ia->ia_broadaddr.sin_family = AF_INET;
} else {
ia->ia_broadaddr.sin_addr.s_addr =
htonl(ia->ia_subnet | ~ia->ia_subnetmask);
ia->ia_broadaddr.sin_len = sizeof(struct sockaddr_in);
ia->ia_broadaddr.sin_family = AF_INET;
}
1994-05-24 10:09:53 +00:00
}
if (ifp->if_flags & IFF_POINTOPOINT)
ia->ia_dstaddr = *dstaddr;
if (vhid != 0) {
error = (*carp_attach_p)(&ia->ia_ifa, vhid);
if (error)
return (error);
}
/* if_addrhead is already referenced by ifa_alloc() */
IF_ADDR_WLOCK(ifp);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_INSERT_TAIL(&ifp->if_addrhead, ifa, ifa_link);
IF_ADDR_WUNLOCK(ifp);
ifa_ref(ifa); /* in_ifaddrhead */
IN_IFADDR_WLOCK();
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_INSERT_TAIL(&V_in_ifaddrhead, ia, ia_link);
LIST_INSERT_HEAD(INADDR_HASH(ia->ia_addr.sin_addr.s_addr), ia, ia_hash);
IN_IFADDR_WUNLOCK();
/*
* Give the interface a chance to initialize
* if this is its first address,
* and to validate the address if necessary.
*/
if (ifp->if_ioctl != NULL) {
error = (*ifp->if_ioctl)(ifp, SIOCSIFADDR, (caddr_t)ia);
if (error)
goto fail1;
}
/*
* Add route for the network.
*/
if (vhid == 0) {
error = in_addprefix(ia);
if (error)
goto fail1;
}
/*
* Add a loopback route to self.
*/
if (vhid == 0 && ia_need_loopback_route(ia)) {
struct in_ifaddr *eia;
eia = in_localip_more(ia);
if (eia == NULL) {
error = ifa_add_loopback_route((struct ifaddr *)ia,
(struct sockaddr *)&ia->ia_addr);
if (error)
goto fail2;
} else
ifa_free(&eia->ia_ifa);
}
if (iaIsFirst && (ifp->if_flags & IFF_MULTICAST)) {
struct in_addr allhosts_addr;
struct in_ifinfo *ii;
ii = ((struct in_ifinfo *)ifp->if_afdata[AF_INET]);
allhosts_addr.s_addr = htonl(INADDR_ALLHOSTS_GROUP);
error = in_joingroup(ifp, &allhosts_addr, NULL,
&ii->ii_allhosts);
}
/*
* Note: we don't need extra reference for ifa, since we called
* with sx lock held, and ifaddr can not be deleted in concurrent
* thread.
*/
EVENTHANDLER_INVOKE(ifaddr_event_ext, ifp, ifa, IFADDR_EVENT_ADD);
return (error);
fail2:
if (vhid == 0)
(void )in_scrubprefix(ia, LLE_STATIC);
fail1:
if (ia->ia_ifa.ifa_carp)
(*carp_detach_p)(&ia->ia_ifa, false);
IF_ADDR_WLOCK(ifp);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_REMOVE(&ifp->if_addrhead, &ia->ia_ifa, ifaddr, ifa_link);
IF_ADDR_WUNLOCK(ifp);
ifa_free(&ia->ia_ifa); /* if_addrhead */
IN_IFADDR_WLOCK();
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_REMOVE(&V_in_ifaddrhead, ia, in_ifaddr, ia_link);
LIST_REMOVE(ia, ia_hash);
IN_IFADDR_WUNLOCK();
ifa_free(&ia->ia_ifa); /* in_ifaddrhead */
return (error);
}
static int
in_difaddr_ioctl(u_long cmd, caddr_t data, struct ifnet *ifp, struct thread *td)
{
const struct ifreq *ifr = (struct ifreq *)data;
2013-11-06 01:14:00 +00:00
const struct sockaddr_in *addr = (const struct sockaddr_in *)
&ifr->ifr_addr;
struct ifaddr *ifa;
struct in_ifaddr *ia;
bool deleteAny, iaIsLast;
int error;
if (td != NULL) {
error = priv_check(td, PRIV_NET_DELIFADDR);
if (error)
return (error);
}
if (addr->sin_len != sizeof(struct sockaddr_in) ||
addr->sin_family != AF_INET)
deleteAny = true;
else
deleteAny = false;
iaIsLast = true;
ia = NULL;
IF_ADDR_WLOCK(ifp);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
struct in_ifaddr *it;
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
it = (struct in_ifaddr *)ifa;
if (deleteAny && ia == NULL && (td == NULL ||
prison_check_ip4(td->td_ucred, &it->ia_addr.sin_addr) == 0))
ia = it;
if (it->ia_addr.sin_addr.s_addr == addr->sin_addr.s_addr &&
(td == NULL || prison_check_ip4(td->td_ucred,
&addr->sin_addr) == 0))
ia = it;
if (it != ia)
iaIsLast = false;
}
if (ia == NULL) {
IF_ADDR_WUNLOCK(ifp);
return (EADDRNOTAVAIL);
}
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_REMOVE(&ifp->if_addrhead, &ia->ia_ifa, ifaddr, ifa_link);
IF_ADDR_WUNLOCK(ifp);
ifa_free(&ia->ia_ifa); /* if_addrhead */
IN_IFADDR_WLOCK();
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_REMOVE(&V_in_ifaddrhead, ia, in_ifaddr, ia_link);
LIST_REMOVE(ia, ia_hash);
IN_IFADDR_WUNLOCK();
/*
* in_scrubprefix() kills the interface route.
*/
in_scrubprefix(ia, LLE_STATIC);
/*
* in_ifadown gets rid of all the rest of
* the routes. This is not quite the right
* thing to do, but at least if we are running
* a routing process they will come back.
*/
in_ifadown(&ia->ia_ifa, 1);
if (ia->ia_ifa.ifa_carp)
(*carp_detach_p)(&ia->ia_ifa, cmd == SIOCAIFADDR);
/*
* If this is the last IPv4 address configured on this
* interface, leave the all-hosts group.
* No state-change report need be transmitted.
*/
if (iaIsLast && (ifp->if_flags & IFF_MULTICAST)) {
struct in_ifinfo *ii;
ii = ((struct in_ifinfo *)ifp->if_afdata[AF_INET]);
if (ii->ii_allhosts) {
(void)in_leavegroup(ii->ii_allhosts, NULL);
ii->ii_allhosts = NULL;
}
}
IF_ADDR_WLOCK(ifp);
if (callout_stop(&ia->ia_garp_timer) == 1) {
ifa_free(&ia->ia_ifa);
}
IF_ADDR_WUNLOCK(ifp);
EVENTHANDLER_INVOKE(ifaddr_event_ext, ifp, &ia->ia_ifa,
IFADDR_EVENT_DEL);
ifa_free(&ia->ia_ifa); /* in_ifaddrhead */
return (0);
1994-05-24 10:09:53 +00:00
}
static int
in_gifaddr_ioctl(u_long cmd, caddr_t data, struct ifnet *ifp, struct thread *td)
{
struct in_aliasreq *ifra = (struct in_aliasreq *)data;
const struct sockaddr_in *addr = &ifra->ifra_addr;
struct epoch_tracker et;
struct ifaddr *ifa;
struct in_ifaddr *ia;
/*
* ifra_addr must be present and be of INET family.
*/
if (addr->sin_len != sizeof(struct sockaddr_in) ||
addr->sin_family != AF_INET)
return (EINVAL);
/*
* See whether address exist.
*/
ia = NULL;
NET_EPOCH_ENTER(et);
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link) {
struct in_ifaddr *it;
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
it = (struct in_ifaddr *)ifa;
if (it->ia_addr.sin_addr.s_addr == addr->sin_addr.s_addr &&
prison_check_ip4(td->td_ucred, &addr->sin_addr) == 0) {
ia = it;
break;
}
}
if (ia == NULL) {
NET_EPOCH_EXIT(et);
return (EADDRNOTAVAIL);
}
ifra->ifra_mask = ia->ia_sockmask;
if ((ifp->if_flags & IFF_POINTOPOINT) &&
ia->ia_dstaddr.sin_family == AF_INET)
ifra->ifra_dstaddr = ia->ia_dstaddr;
else if ((ifp->if_flags & IFF_BROADCAST) &&
ia->ia_broadaddr.sin_family == AF_INET)
ifra->ifra_broadaddr = ia->ia_broadaddr;
else
memset(&ifra->ifra_broadaddr, 0,
sizeof(ifra->ifra_broadaddr));
NET_EPOCH_EXIT(et);
return (0);
}
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
static int
in_match_ifaddr(const struct rtentry *rt, const struct nhop_object *nh, void *arg)
{
if (nh->nh_ifa == (struct ifaddr *)arg)
return (1);
return (0);
}
static int
in_handle_prefix_route(uint32_t fibnum, int cmd,
struct sockaddr_in *dst, struct sockaddr_in *netmask, struct ifaddr *ifa,
struct ifnet *ifp)
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
{
NET_EPOCH_ASSERT();
/* Prepare gateway */
struct sockaddr_dl_short sdl = {
.sdl_family = AF_LINK,
.sdl_len = sizeof(struct sockaddr_dl_short),
.sdl_type = ifa->ifa_ifp->if_type,
.sdl_index = ifa->ifa_ifp->if_index,
};
struct rt_addrinfo info = {
.rti_ifa = ifa,
.rti_ifp = ifp,
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
.rti_flags = RTF_PINNED | ((netmask != NULL) ? 0 : RTF_HOST),
.rti_info = {
[RTAX_DST] = (struct sockaddr *)dst,
[RTAX_NETMASK] = (struct sockaddr *)netmask,
[RTAX_GATEWAY] = (struct sockaddr *)&sdl,
},
/* Ensure we delete the prefix IFF prefix ifa matches */
.rti_filter = in_match_ifaddr,
.rti_filterdata = ifa,
};
return (rib_handle_ifaddr_info(fibnum, cmd, &info));
}
/*
* Routing table interaction with interface addresses.
*
* In general, two types of routes needs to be installed:
* a) "interface" or "prefix" route, telling user that the addresses
* behind the ifa prefix are reached directly.
* b) "loopback" route installed for the ifa address, telling user that
* the address belongs to local system.
*
* Handling for (a) and (b) differs in multi-fib aspects, hence they
* are implemented in different functions below.
*
* The cases above may intersect - /32 interface aliases results in
* the same prefix produced by (a) and (b). This blurs the definition
* of the "loopback" route and complicate interactions. The interaction
* table is defined below. The case numbers are used in the multiple
* functions below to refer to the particular test case.
*
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
* There can be multiple options:
* 1) Adding address with prefix on non-p2p/non-loopback interface.
* Example: 192.0.2.1/24. Action:
* * add "prefix" route towards 192.0.2.0/24 via @ia interface,
* using @ia as an address source.
* * add "loopback" route towards 192.0.2.1 via V_loif, saving
* @ia ifp in the gateway and using @ia as an address source.
*
* 2) Adding address with /32 mask to non-p2p/non-loopback interface.
* Example: 192.0.2.2/32. Action:
* * add "prefix" host route via V_loif, using @ia as an address source.
*
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
* 3) Adding address with or without prefix to p2p interface.
* Example: 10.0.0.1/24->10.0.0.2. Action:
* * add "prefix" host route towards 10.0.0.2 via this interface, using @ia
* as an address source. Note: no sense in installing full /24 as the interface
* is point-to-point.
* * add "loopback" route towards 10.0.9.1 via V_loif, saving
* @ia ifp in the gateway and using @ia as an address source.
*
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
* 4) Adding address with or without prefix to loopback interface.
* Example: 192.0.2.1/24. Action:
* * add "prefix" host route via @ia interface, using @ia as an address source.
* Note: Skip installing /24 prefix as it would introduce TTL loop
* for the traffic destined to these addresses.
*/
/*
* Checks if @ia needs to install loopback route to @ia address via
* ifa_maintain_loopback_route().
*
* Return true on success.
*/
static bool
ia_need_loopback_route(const struct in_ifaddr *ia)
{
struct ifnet *ifp = ia->ia_ifp;
/* Case 4: Skip loopback interfaces */
if ((ifp->if_flags & IFF_LOOPBACK) ||
(ia->ia_addr.sin_addr.s_addr == INADDR_ANY))
return (false);
/* Clash avoidance: Skip p2p interfaces with both addresses are equal */
if ((ifp->if_flags & IFF_POINTOPOINT) &&
ia->ia_dstaddr.sin_addr.s_addr == ia->ia_addr.sin_addr.s_addr)
return (false);
/* Case 2: skip /32 prefixes */
if (!(ifp->if_flags & IFF_POINTOPOINT) &&
(ia->ia_sockmask.sin_addr.s_addr == INADDR_BROADCAST))
return (false);
return (true);
}
/*
* Calculate "prefix" route corresponding to @ia.
*/
static void
ia_getrtprefix(const struct in_ifaddr *ia, struct in_addr *prefix, struct in_addr *mask)
{
if (ia->ia_ifp->if_flags & IFF_POINTOPOINT) {
/* Case 3: return host route for dstaddr */
*prefix = ia->ia_dstaddr.sin_addr;
mask->s_addr = INADDR_BROADCAST;
} else if (ia->ia_ifp->if_flags & IFF_LOOPBACK) {
/* Case 4: return host route for ifaddr */
*prefix = ia->ia_addr.sin_addr;
mask->s_addr = INADDR_BROADCAST;
} else {
/* Cases 1,2: return actual ia prefix */
*prefix = ia->ia_addr.sin_addr;
*mask = ia->ia_sockmask.sin_addr;
prefix->s_addr &= mask->s_addr;
}
}
/*
* Adds or delete interface "prefix" route corresponding to @ifa.
* Returns 0 on success or errno.
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
*/
int
in_handle_ifaddr_route(int cmd, struct in_ifaddr *ia)
{
struct ifaddr *ifa = &ia->ia_ifa;
struct in_addr daddr, maddr;
struct sockaddr_in *pmask;
struct epoch_tracker et;
int error;
ia_getrtprefix(ia, &daddr, &maddr);
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
struct sockaddr_in mask = {
.sin_family = AF_INET,
.sin_len = sizeof(struct sockaddr_in),
.sin_addr = maddr,
};
pmask = (maddr.s_addr != INADDR_BROADCAST) ? &mask : NULL;
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
struct sockaddr_in dst = {
.sin_family = AF_INET,
.sin_len = sizeof(struct sockaddr_in),
.sin_addr.s_addr = daddr.s_addr & maddr.s_addr,
};
struct ifnet *ifp = ia->ia_ifp;
if ((maddr.s_addr == INADDR_BROADCAST) &&
(!(ia->ia_ifp->if_flags & (IFF_POINTOPOINT|IFF_LOOPBACK)))) {
/* Case 2: host route on broadcast interface */
ifp = V_loif;
}
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
uint32_t fibnum = ifa->ifa_ifp->if_fib;
NET_EPOCH_ENTER(et);
error = in_handle_prefix_route(fibnum, cmd, &dst, pmask, ifa, ifp);
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
NET_EPOCH_EXIT(et);
return (error);
}
/*
* Check if we have a route for the given prefix already.
*/
static bool
in_hasrtprefix(struct in_ifaddr *target)
{
struct rm_priotracker in_ifa_tracker;
struct in_ifaddr *ia;
struct in_addr prefix, mask, p, m;
bool result = false;
ia_getrtprefix(target, &prefix, &mask);
IN_IFADDR_RLOCK(&in_ifa_tracker);
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
/* Look for an existing address with the same prefix, mask, and fib */
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ia, &V_in_ifaddrhead, ia_link) {
ia_getrtprefix(ia, &p, &m);
if (prefix.s_addr != p.s_addr ||
mask.s_addr != m.s_addr)
continue;
Fix subnet and default routes on different FIBs on the same subnet. These two bugs are closely related. The root cause is that ifa_ifwithnet does not consider FIBs when searching for an interface address. sys/net/if_var.h sys/net/if.c Add a fib argument to ifa_ifwithnet and ifa_ifwithdstadddr. Those functions will only return an address whose interface fib equals the argument. sys/net/route.c Update calls to ifa_ifwithnet and ifa_ifwithdstaddr with fib arguments. sys/netinet/in.c Update in_addprefix to consider the interface fib when adding prefixes. This will prevent it from not adding a subnet route when one already exists on a different fib. sys/net/rtsock.c sys/netinet/in_pcb.c sys/netinet/ip_output.c sys/netinet/ip_options.c sys/netinet6/nd6.c Add RT_DEFAULT_FIB arguments to ifa_ifwithdstaddr and ifa_ifwithnet. In some cases it there wasn't a clear specific fib number to use. In others, I was unable to test those functions so I chose RT_DEFAULT_FIB to minimize divergence from current behavior. I will fix some of the latter changes along with PR kern/187553. tests/sys/netinet/fibs_test.sh tests/sys/netinet/udp_dontroute.c tests/sys/netinet/Makefile Revert r263738. The udp_dontroute test was right all along. However, bugs kern/187550 and kern/187553 cancelled each other out when it came to this test. Because of kern/187553, ifa_ifwithnet searched the default fib instead of the requested one, but because of kern/187550, there was an applicable subnet route on the default fib. The new test added in r263738 doesn't work right, however. I can verify with dtrace that ifa_ifwithnet returned the wrong address before I applied this commit, but route(8) miraculously found the correct interface to use anyway. I don't know how. Clear expected failure messages for kern/187550 and kern/187552. PR: kern/187550 PR: kern/187552 Reviewed by: melifaro MFC after: 3 weeks Sponsored by: Spectra Logic
2014-04-24 23:56:56 +00:00
if (target->ia_ifp->if_fib != ia->ia_ifp->if_fib)
continue;
/*
* If we got a matching prefix route inserted by other
* interface address, we are done here.
*/
if (ia->ia_flags & IFA_ROUTE) {
result = true;
break;
}
}
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
return (result);
}
int
in_addprefix(struct in_ifaddr *target)
{
int error;
if (in_hasrtprefix(target)) {
if (V_nosameprefix)
return (EEXIST);
else {
rt_addrmsg(RTM_ADD, &target->ia_ifa,
target->ia_ifp->if_fib);
return (0);
}
}
/*
* No-one seem to have this prefix route, so we try to insert it.
*/
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
rt_addrmsg(RTM_ADD, &target->ia_ifa, target->ia_ifp->if_fib);
error = in_handle_ifaddr_route(RTM_ADD, target);
if (!error)
target->ia_flags |= IFA_ROUTE;
return (error);
}
/*
* Removes either all lle entries for given @ia, or lle
* corresponding to @ia address.
*/
static void
in_scrubprefixlle(struct in_ifaddr *ia, int all, u_int flags)
{
struct sockaddr_in addr, mask;
struct sockaddr *saddr, *smask;
struct ifnet *ifp;
saddr = (struct sockaddr *)&addr;
bzero(&addr, sizeof(addr));
addr.sin_len = sizeof(addr);
addr.sin_family = AF_INET;
smask = (struct sockaddr *)&mask;
bzero(&mask, sizeof(mask));
mask.sin_len = sizeof(mask);
mask.sin_family = AF_INET;
mask.sin_addr.s_addr = ia->ia_subnetmask;
ifp = ia->ia_ifp;
if (all) {
/*
* Remove all L2 entries matching given prefix.
* Convert address to host representation to avoid
* doing this on every callback. ia_subnetmask is already
* stored in host representation.
*/
addr.sin_addr.s_addr = ntohl(ia->ia_addr.sin_addr.s_addr);
lltable_prefix_free(AF_INET, saddr, smask, flags);
} else {
/* Remove interface address only */
addr.sin_addr.s_addr = ia->ia_addr.sin_addr.s_addr;
lltable_delete_addr(LLTABLE(ifp), LLE_IFADDR, saddr);
}
}
/*
* If there is no other address in the system that can serve a route to the
* same prefix, remove the route. Hand over the route to the new address
* otherwise.
*/
int
in_scrubprefix(struct in_ifaddr *target, u_int flags)
{
struct rm_priotracker in_ifa_tracker;
struct in_ifaddr *ia;
struct in_addr prefix, mask, p, m;
int error = 0;
/*
* Remove the loopback route to the interface address.
*/
if (ia_need_loopback_route(target) && (flags & LLE_STATIC)) {
struct in_ifaddr *eia;
eia = in_localip_more(target);
if (eia != NULL) {
error = ifa_switch_loopback_route((struct ifaddr *)eia,
(struct sockaddr *)&target->ia_addr);
ifa_free(&eia->ia_ifa);
} else {
error = ifa_del_loopback_route((struct ifaddr *)target,
(struct sockaddr *)&target->ia_addr);
}
}
ia_getrtprefix(target, &prefix, &mask);
if ((target->ia_flags & IFA_ROUTE) == 0) {
rt_addrmsg(RTM_DELETE, &target->ia_ifa, target->ia_ifp->if_fib);
/*
* Removing address from !IFF_UP interface or
* prefix which exists on other interface (along with route).
* No entries should exist here except target addr.
* Given that, delete this entry only.
*/
in_scrubprefixlle(target, 0, flags);
return (0);
}
IN_IFADDR_RLOCK(&in_ifa_tracker);
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ia, &V_in_ifaddrhead, ia_link) {
ia_getrtprefix(ia, &p, &m);
if (prefix.s_addr != p.s_addr ||
mask.s_addr != m.s_addr)
continue;
if ((ia->ia_ifp->if_flags & IFF_UP) == 0)
continue;
/*
* If we got a matching prefix address, move IFA_ROUTE and
* the route itself to it. Make sure that routing daemons
* get a heads-up.
*/
if ((ia->ia_flags & IFA_ROUTE) == 0) {
ifa_ref(&ia->ia_ifa);
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
error = in_handle_ifaddr_route(RTM_DELETE, target);
if (error == 0)
target->ia_flags &= ~IFA_ROUTE;
else
log(LOG_INFO, "in_scrubprefix: err=%d, old prefix delete failed\n",
error);
/* Scrub all entries IFF interface is different */
in_scrubprefixlle(target, target->ia_ifp != ia->ia_ifp,
flags);
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
error = in_handle_ifaddr_route(RTM_ADD, ia);
if (error == 0)
ia->ia_flags |= IFA_ROUTE;
else
log(LOG_INFO, "in_scrubprefix: err=%d, new prefix add failed\n",
error);
ifa_free(&ia->ia_ifa);
return (error);
}
}
IN_IFADDR_RUNLOCK(&in_ifa_tracker);
/*
* remove all L2 entries on the given prefix
*/
in_scrubprefixlle(target, 1, flags);
/*
* As no-one seem to have this prefix, we can remove the route.
*/
Split rtinit() into multiple functions. rtinit[1]() is a function used to add or remove interface address prefix routes, similar to ifa_maintain_loopback_route(). It was intended to be family-agnostic. There is a problem with this approach in reality. 1) IPv6 code does not use it for the ifa routes. There is a separate layer, nd6_prelist_(), providing interface for maintaining interface routes. Its part, responsible for the actual route table interaction, mimics rtenty() code. 2) rtinit tries to combine multiple actions in the same function: constructing proper route attributes and handling iterations over multiple fibs, for the non-zero net.add_addr_allfibs use case. It notably increases the code complexity. 3) dstaddr handling. flags parameter re-uses RTF_ flags. As there is no special flag for p2p connections, host routes and p2p routes are handled in the same way. Additionally, mapping IFA flags to RTF flags makes the interface pretty messy. It make rtinit() to clash with ifa_mainain_loopback_route() for IPV4 interface aliases. 4) rtinit() is the last customer passing non-masked prefixes to rib_action(), complicating rib_action() implementation. 5) rtinit() coupled ifa announce/withdrawal notifications, producing "false positive" ifa messages in certain corner cases. To address all these points, the following has been done: * rtinit() has been split into multiple functions: - Route attribute construction were moved to the per-address-family functions, dealing with (2), (3) and (4). - funnction providing net.add_addr_allfibs handling and route rtsock notificaions is the new routing table inteface. - rtsock ifa notificaion has been moved out as well. resulting set of funcion are only responsible for the actual route notifications. Side effects: * /32 alias does not result in interface routes (/32 route and "host" route) * RTF_PINNED is now set for IPv6 prefixes corresponding to the interface addresses Differential revision: https://reviews.freebsd.org/D28186
2021-01-09 00:19:25 +00:00
rt_addrmsg(RTM_DELETE, &target->ia_ifa, target->ia_ifp->if_fib);
error = in_handle_ifaddr_route(RTM_DELETE, target);
if (error == 0)
target->ia_flags &= ~IFA_ROUTE;
else
log(LOG_INFO, "in_scrubprefix: err=%d, prefix delete failed\n", error);
return (error);
}
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
void
in_ifscrub_all(void)
{
struct ifnet *ifp;
struct ifaddr *ifa, *nifa;
struct ifaliasreq ifr;
IFNET_RLOCK();
CK_STAILQ_FOREACH(ifp, &V_ifnet, if_link) {
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
/* Cannot lock here - lock recursion. */
/* NET_EPOCH_ENTER(et); */
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH_SAFE(ifa, &ifp->if_addrhead, ifa_link, nifa) {
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
if (ifa->ifa_addr->sa_family != AF_INET)
continue;
/*
* This is ugly but the only way for legacy IP to
* cleanly remove addresses and everything attached.
*/
bzero(&ifr, sizeof(ifr));
ifr.ifra_addr = *ifa->ifa_addr;
if (ifa->ifa_dstaddr)
ifr.ifra_broadaddr = *ifa->ifa_dstaddr;
(void)in_control(NULL, SIOCDIFADDR, (caddr_t)&ifr,
ifp, NULL);
}
/* NET_EPOCH_EXIT(et); */
Get closer to a VIMAGE network stack teardown from top to bottom rather than removing the network interfaces first. This change is rather larger and convoluted as the ordering requirements cannot be separated. Move the pfil(9) framework to SI_SUB_PROTO_PFIL, move Firewalls and related modules to their own SI_SUB_PROTO_FIREWALL. Move initialization of "physical" interfaces to SI_SUB_DRIVERS, move virtual (cloned) interfaces to SI_SUB_PSEUDO. Move Multicast to SI_SUB_PROTO_MC. Re-work parts of multicast initialisation and teardown, not taking the huge amount of memory into account if used as a module yet. For interface teardown we try to do as many of them as we can on SI_SUB_INIT_IF, but for some this makes no sense, e.g., when tunnelling over a higher layer protocol such as IP. In that case the interface has to go along (or before) the higher layer protocol is shutdown. Kernel hhooks need to go last on teardown as they may be used at various higher layers and we cannot remove them before we cleaned up the higher layers. For interface teardown there are multiple paths: (a) a cloned interface is destroyed (inside a VIMAGE or in the base system), (b) any interface is moved from a virtual network stack to a different network stack ("vmove"), or (c) a virtual network stack is being shut down. All code paths go through if_detach_internal() where we, depending on the vmove flag or the vnet state, make a decision on how much to shut down; in case we are destroying a VNET the individual protocol layers will cleanup their own parts thus we cannot do so again for each interface as we end up with, e.g., double-frees, destroying locks twice or acquiring already destroyed locks. When calling into protocol cleanups we equally have to tell them whether they need to detach upper layer protocols ("ulp") or not (e.g., in6_ifdetach()). Provide or enahnce helper functions to do proper cleanup at a protocol rather than at an interface level. Approved by: re (hrs) Obtained from: projects/vnet Reviewed by: gnn, jhb Sponsored by: The FreeBSD Foundation MFC after: 2 weeks Differential Revision: https://reviews.freebsd.org/D6747
2016-06-21 13:48:49 +00:00
in_purgemaddrs(ifp);
igmp_domifdetach(ifp);
}
IFNET_RUNLOCK();
}
int
in_ifaddr_broadcast(struct in_addr in, struct in_ifaddr *ia)
{
return ((in.s_addr == ia->ia_broadaddr.sin_addr.s_addr ||
/*
* Check for old-style (host 0) broadcast, but
* taking into account that RFC 3021 obsoletes it.
*/
(ia->ia_subnetmask != IN_RFC3021_MASK &&
ntohl(in.s_addr) == ia->ia_subnet)) &&
/*
* Check for an all one subnetmask. These
* only exist when an interface gets a secondary
* address.
*/
ia->ia_subnetmask != (u_long)0xffffffff);
}
1994-05-24 10:09:53 +00:00
/*
* Return 1 if the address might be a local broadcast address.
*/
int
in_broadcast(struct in_addr in, struct ifnet *ifp)
1994-05-24 10:09:53 +00:00
{
struct ifaddr *ifa;
int found;
1994-05-24 10:09:53 +00:00
Widen NET_EPOCH coverage. When epoch(9) was introduced to network stack, it was basically dropped in place of existing locking, which was mutexes and rwlocks. For the sake of performance mutex covered areas were as small as possible, so became epoch covered areas. However, epoch doesn't introduce any contention, it just delays memory reclaim. So, there is no point to minimise epoch covered areas in sense of performance. Meanwhile entering/exiting epoch also has non-zero CPU usage, so doing this less often is a win. Not the least is also code maintainability. In the new paradigm we can assume that at any stage of processing a packet, we are inside network epoch. This makes coding both input and output path way easier. On output path we already enter epoch quite early - in the ip_output(), in the ip6_output(). This patch does the same for the input path. All ISR processing, network related callouts, other ways of packet injection to the network stack shall be performed in net_epoch. Any leaf function that walks network configuration now asserts epoch. Tricky part is configuration code paths - ioctls, sysctls. They also call into leaf functions, so some need to be changed. This patch would introduce more epoch recursions (see EPOCH_TRACE) than we had before. They will be cleaned up separately, as several of them aren't trivial. Note, that unlike a lock recursion the epoch recursion is safe and just wastes a bit of resources. Reviewed by: gallatin, hselasky, cy, adrian, kristof Differential Revision: https://reviews.freebsd.org/D19111
2019-10-07 22:40:05 +00:00
NET_EPOCH_ASSERT();
1994-05-24 10:09:53 +00:00
if (in.s_addr == INADDR_BROADCAST ||
in.s_addr == INADDR_ANY)
return (1);
1994-05-24 10:09:53 +00:00
if ((ifp->if_flags & IFF_BROADCAST) == 0)
return (0);
found = 0;
1994-05-24 10:09:53 +00:00
/*
* Look through the list of addresses for a match
* with a broadcast address.
*/
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH(ifa, &ifp->if_addrhead, ifa_link)
1994-05-24 10:09:53 +00:00
if (ifa->ifa_addr->sa_family == AF_INET &&
in_ifaddr_broadcast(in, (struct in_ifaddr *)ifa)) {
found = 1;
break;
}
return (found);
1994-05-24 10:09:53 +00:00
}
/*
* On interface removal, clean up IPv4 data structures hung off of the ifnet.
*/
void
in_ifdetach(struct ifnet *ifp)
{
IN_MULTI_LOCK();
in_pcbpurgeif0(&V_ripcbinfo, ifp);
in_pcbpurgeif0(&V_udbinfo, ifp);
in_pcbpurgeif0(&V_ulitecbinfo, ifp);
in_purgemaddrs(ifp);
IN_MULTI_UNLOCK();
/*
* Make sure all multicast deletions invoking if_ioctl() are
* completed before returning. Else we risk accessing a freed
* ifnet structure pointer.
*/
inm_release_wait(NULL);
}
/*
* Delete all IPv4 multicast address records, and associated link-layer
* multicast address records, associated with ifp.
* XXX It looks like domifdetach runs AFTER the link layer cleanup.
* XXX This should not race with ifma_protospec being set during
* a new allocation, if it does, we have bigger problems.
*/
static void
in_purgemaddrs(struct ifnet *ifp)
{
struct in_multi_head purgeinms;
struct in_multi *inm;
struct ifmultiaddr *ifma, *next;
SLIST_INIT(&purgeinms);
IN_MULTI_LIST_LOCK();
/*
* Extract list of in_multi associated with the detaching ifp
* which the PF_INET layer is about to release.
* We need to do this as IF_ADDR_LOCK() may be re-acquired
* by code further down.
*/
IF_ADDR_WLOCK(ifp);
restart:
ifnet: Replace if_addr_lock rwlock with epoch + mutex Run on LLNW canaries and tested by pho@ gallatin: Using a 14-core, 28-HTT single socket E5-2697 v3 with a 40GbE MLX5 based ConnectX 4-LX NIC, I see an almost 12% improvement in received packet rate, and a larger improvement in bytes delivered all the way to userspace. When the host receiving 64 streams of netperf -H $DUT -t UDP_STREAM -- -m 1, I see, using nstat -I mce0 1 before the patch: InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 4.98 0.00 4.42 0.00 4235592 33 83.80 4720653 2149771 1235 247.32 4.73 0.00 4.20 0.00 4025260 33 82.99 4724900 2139833 1204 247.32 4.72 0.00 4.20 0.00 4035252 33 82.14 4719162 2132023 1264 247.32 4.71 0.00 4.21 0.00 4073206 33 83.68 4744973 2123317 1347 247.32 4.72 0.00 4.21 0.00 4061118 33 80.82 4713615 2188091 1490 247.32 4.72 0.00 4.21 0.00 4051675 33 85.29 4727399 2109011 1205 247.32 4.73 0.00 4.21 0.00 4039056 33 84.65 4724735 2102603 1053 247.32 After the patch InMpps OMpps InGbs OGbs err TCP Est %CPU syscalls csw irq GBfree 5.43 0.00 4.20 0.00 3313143 33 84.96 5434214 1900162 2656 245.51 5.43 0.00 4.20 0.00 3308527 33 85.24 5439695 1809382 2521 245.51 5.42 0.00 4.19 0.00 3316778 33 87.54 5416028 1805835 2256 245.51 5.42 0.00 4.19 0.00 3317673 33 90.44 5426044 1763056 2332 245.51 5.42 0.00 4.19 0.00 3314839 33 88.11 5435732 1792218 2499 245.52 5.44 0.00 4.19 0.00 3293228 33 91.84 5426301 1668597 2121 245.52 Similarly, netperf reports 230Mb/s before the patch, and 270Mb/s after the patch Reviewed by: gallatin Sponsored by: Limelight Networks Differential Revision: https://reviews.freebsd.org/D15366
2018-05-18 20:13:34 +00:00
CK_STAILQ_FOREACH_SAFE(ifma, &ifp->if_multiaddrs, ifma_link, next) {
if (ifma->ifma_addr->sa_family != AF_INET ||
ifma->ifma_protospec == NULL)
continue;
inm = (struct in_multi *)ifma->ifma_protospec;
inm_rele_locked(&purgeinms, inm);
if (__predict_false(ifma_restart)) {
ifma_restart = true;
goto restart;
}
}
IF_ADDR_WUNLOCK(ifp);
inm_release_list_deferred(&purgeinms);
igmp_ifdetach(ifp);
IN_MULTI_LIST_UNLOCK();
}
struct in_llentry {
struct llentry base;
};
#define IN_LLTBL_DEFAULT_HSIZE 32
#define IN_LLTBL_HASH(k, h) \
(((((((k >> 8) ^ k) >> 8) ^ k) >> 8) ^ k) & ((h) - 1))
/*
* Do actual deallocation of @lle.
*/
static void
in_lltable_destroy_lle_unlocked(epoch_context_t ctx)
{
struct llentry *lle;
lle = __containerof(ctx, struct llentry, lle_epoch_ctx);
LLE_LOCK_DESTROY(lle);
LLE_REQ_DESTROY(lle);
free(lle, M_LLTABLE);
}
/*
* Called by LLE_FREE_LOCKED when number of references
* drops to zero.
*/
static void
in_lltable_destroy_lle(struct llentry *lle)
{
LLE_WUNLOCK(lle);
NET_EPOCH_CALL(in_lltable_destroy_lle_unlocked, &lle->lle_epoch_ctx);
}
static struct llentry *
in_lltable_new(struct in_addr addr4, u_int flags)
{
struct in_llentry *lle;
lle = malloc(sizeof(struct in_llentry), M_LLTABLE, M_NOWAIT | M_ZERO);
if (lle == NULL) /* NB: caller generates msg */
return NULL;
/*
* For IPv4 this will trigger "arpresolve" to generate
* an ARP request.
*/
lle->base.la_expire = time_uptime; /* mark expired */
lle->base.r_l3addr.addr4 = addr4;
lle->base.lle_refcnt = 1;
lle->base.lle_free = in_lltable_destroy_lle;
LLE_LOCK_INIT(&lle->base);
Remove LLE read lock from IPv4 fast path. LLE structure is mostly unchanged during its lifecycle. To be more specific, there are 2 things relevant for fast path lookup code: 1) link-level address change. Since r286722, these updates are performed under AFDATA WLOCK. 2) Some sort of feedback indicating that this particular entry is used so we re-send arp request to perform reachability verification instead of expiring entry. The only signal that is needed from fast path is something like binary yes/no. The latter is solved by the following changes: 1) introduce special r_skip_req field which is read lockless by fast path, but updated under (new) req_mutex mutex. If this field is non-zero, then fast path will acquire lock and set it back to 0. 2) introduce simple state machine: incomplete->reachable<->verify->deleted. Before that we implicitely had incomplete->reachable->deleted state machine, with V_arpt_keep between "reachable" and "deleted". Verification was performed in runtime 5 seconds before V_arpt_keep expire. This is changed to "change state to verify 5 seconds before V_arpt_keep, set r_skip_req to non-zero value and check it every second". If the value is zero - then send arp verification probe. These changes do not introduce any signifficant control plane overhead: typically lle callout timer would fire 1 time more each V_arpt_keep (1200s) for used lles and up to arp_maxtries (5) for dead lles. As a result, all packets towards "reachable" lle are handled by fast path without acquiring lle read lock. Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler might keep LLE lock for signifficant amount of time, which might not be feasible for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock). Differential Revision: https://reviews.freebsd.org/D3688
2015-12-05 09:50:37 +00:00
LLE_REQ_INIT(&lle->base);
callout_init(&lle->base.lle_timer, 1);
return (&lle->base);
}
#define IN_ARE_MASKED_ADDR_EQUAL(d, a, m) ( \
((((d).s_addr ^ (a).s_addr) & (m).s_addr)) == 0 )
static int
in_lltable_match_prefix(const struct sockaddr *saddr,
const struct sockaddr *smask, u_int flags, struct llentry *lle)
{
struct in_addr addr, mask, lle_addr;
addr = ((const struct sockaddr_in *)saddr)->sin_addr;
mask = ((const struct sockaddr_in *)smask)->sin_addr;
lle_addr.s_addr = ntohl(lle->r_l3addr.addr4.s_addr);
if (IN_ARE_MASKED_ADDR_EQUAL(lle_addr, addr, mask) == 0)
return (0);
if (lle->la_flags & LLE_IFADDR) {
/*
* Delete LLE_IFADDR records IFF address & flag matches.
* Note that addr is the interface address within prefix
* being matched.
* Note also we should handle 'ifdown' cases without removing
* ifaddr macs.
*/
if (addr.s_addr == lle_addr.s_addr && (flags & LLE_STATIC) != 0)
return (1);
return (0);
}
/* flags & LLE_STATIC means deleting both dynamic and static entries */
if ((flags & LLE_STATIC) || !(lle->la_flags & LLE_STATIC))
return (1);
return (0);
}
static void
in_lltable_free_entry(struct lltable *llt, struct llentry *lle)
{
size_t pkts_dropped;
LLE_WLOCK_ASSERT(lle);
KASSERT(llt != NULL, ("lltable is NULL"));
/* Unlink entry from table if not already */
if ((lle->la_flags & LLE_LINKED) != 0) {
2018-05-19 05:56:21 +00:00
IF_AFDATA_WLOCK_ASSERT(llt->llt_ifp);
lltable_unlink_entry(llt, lle);
}
/* Drop hold queue */
pkts_dropped = llentry_free(lle);
ARPSTAT_ADD(dropped, pkts_dropped);
}
static int
in_lltable_rtcheck(struct ifnet *ifp, u_int flags, const struct sockaddr *l3addr)
{
struct rt_addrinfo info;
struct sockaddr_in rt_key, rt_mask;
struct sockaddr rt_gateway;
int rt_flags;
KASSERT(l3addr->sa_family == AF_INET,
("sin_family %d", l3addr->sa_family));
bzero(&rt_key, sizeof(rt_key));
rt_key.sin_len = sizeof(rt_key);
bzero(&rt_mask, sizeof(rt_mask));
rt_mask.sin_len = sizeof(rt_mask);
bzero(&rt_gateway, sizeof(rt_gateway));
rt_gateway.sa_len = sizeof(rt_gateway);
bzero(&info, sizeof(info));
info.rti_info[RTAX_DST] = (struct sockaddr *)&rt_key;
info.rti_info[RTAX_NETMASK] = (struct sockaddr *)&rt_mask;
info.rti_info[RTAX_GATEWAY] = (struct sockaddr *)&rt_gateway;
if (rib_lookup_info(ifp->if_fib, l3addr, NHR_REF, 0, &info) != 0)
return (EINVAL);
rt_flags = info.rti_flags;
/*
* If the gateway for an existing host route matches the target L3
* address, which is a special route inserted by some implementation
* such as MANET, and the interface is of the correct type, then
* allow for ARP to proceed.
*/
if (rt_flags & RTF_GATEWAY) {
if (!(rt_flags & RTF_HOST) || !info.rti_ifp ||
info.rti_ifp->if_type != IFT_ETHER ||
(info.rti_ifp->if_flags & (IFF_NOARP | IFF_STATICARP)) != 0 ||
memcmp(rt_gateway.sa_data, l3addr->sa_data,
sizeof(in_addr_t)) != 0) {
rib_free_info(&info);
return (EINVAL);
}
}
rib_free_info(&info);
/*
* Make sure that at least the destination address is covered
* by the route. This is for handling the case where 2 or more
* interfaces have the same prefix. An incoming packet arrives
* on one interface and the corresponding outgoing packet leaves
* another interface.
*/
if (!(rt_flags & RTF_HOST) && info.rti_ifp != ifp) {
const char *sa, *mask, *addr, *lim;
const struct sockaddr_in *l3sin;
mask = (const char *)&rt_mask;
/*
* Just being extra cautious to avoid some custom
* code getting into trouble.
*/
if ((info.rti_addrs & RTA_NETMASK) == 0)
return (EINVAL);
sa = (const char *)&rt_key;
addr = (const char *)l3addr;
l3sin = (const struct sockaddr_in *)l3addr;
lim = addr + l3sin->sin_len;
for ( ; addr < lim; sa++, mask++, addr++) {
if ((*sa ^ *addr) & *mask) {
#ifdef DIAGNOSTIC
char addrbuf[INET_ADDRSTRLEN];
log(LOG_INFO, "IPv4 address: \"%s\" "
"is not on the network\n",
inet_ntoa_r(l3sin->sin_addr, addrbuf));
#endif
return (EINVAL);
}
}
}
return (0);
}
static inline uint32_t
in_lltable_hash_dst(const struct in_addr dst, uint32_t hsize)
{
return (IN_LLTBL_HASH(dst.s_addr, hsize));
}
static uint32_t
in_lltable_hash(const struct llentry *lle, uint32_t hsize)
{
return (in_lltable_hash_dst(lle->r_l3addr.addr4, hsize));
}
static void
in_lltable_fill_sa_entry(const struct llentry *lle, struct sockaddr *sa)
{
struct sockaddr_in *sin;
sin = (struct sockaddr_in *)sa;
bzero(sin, sizeof(*sin));
sin->sin_family = AF_INET;
sin->sin_len = sizeof(*sin);
sin->sin_addr = lle->r_l3addr.addr4;
}
static inline struct llentry *
in_lltable_find_dst(struct lltable *llt, struct in_addr dst)
{
struct llentry *lle;
struct llentries *lleh;
u_int hashidx;
hashidx = in_lltable_hash_dst(dst, llt->llt_hsize);
lleh = &llt->lle_head[hashidx];
CK_LIST_FOREACH(lle, lleh, lle_next) {
if (lle->la_flags & LLE_DELETED)
continue;
if (lle->r_l3addr.addr4.s_addr == dst.s_addr)
break;
}
return (lle);
}
static void
in_lltable_delete_entry(struct lltable *llt, struct llentry *lle)
{
lle->la_flags |= LLE_DELETED;
EVENTHANDLER_INVOKE(lle_event, lle, LLENTRY_DELETED);
#ifdef DIAGNOSTIC
log(LOG_INFO, "ifaddr cache = %p is deleted\n", lle);
#endif
llentry_free(lle);
}
static struct llentry *
in_lltable_alloc(struct lltable *llt, u_int flags, const struct sockaddr *l3addr)
{
const struct sockaddr_in *sin = (const struct sockaddr_in *)l3addr;
struct ifnet *ifp = llt->llt_ifp;
struct llentry *lle;
Implement interface link header precomputation API. Add if_requestencap() interface method which is capable of calculating various link headers for given interface. Right now there is support for INET/INET6/ARP llheader calculation (IFENCAP_LL type request). Other types are planned to support more complex calculation (L2 multipath lagg nexthops, tunnel encap nexthops, etc..). Reshape 'struct route' to be able to pass additional data (with is length) to prepend to mbuf. These two changes permits routing code to pass pre-calculated nexthop data (like L2 header for route w/gateway) down to the stack eliminating the need for other lookups. It also brings us closer to more complex scenarios like transparently handling MPLS nexthops and tunnel interfaces. Last, but not least, it removes layering violation introduced by flowtable code (ro_lle) and simplifies handling of existing if_output consumers. ARP/ND changes: Make arp/ndp stack pre-calculate link header upon installing/updating lle record. Interface link address change are handled by re-calculating headers for all lles based on if_lladdr event. After these changes, arpresolve()/nd6_resolve() returns full pre-calculated header for supported interfaces thus simplifying if_output(). Move these lookups to separate ether_resolve_addr() function which ether returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr() compat versions to return link addresses instead of pre-calculated data. BPF changes: Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT. Despite the naming, both of there have ther header "complete". The only difference is that interface source mac has to be filled by OS for AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside BPF and not pollute if_output() routines. Convert BPF to pass prepend data via new 'struct route' mechanism. Note that it does not change non-optimized if_output(): ro_prepend handling is purely optional. Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI. It is not needed for ethernet anymore. The only remaining FDDI user is dev/pdq mostly untouched since 2007. FDDI support was eliminated from OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65). Flowtable changes: Flowtable violates layering by saving (and not correctly managing) rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated header data from that lle. Differential Revision: https://reviews.freebsd.org/D4102
2015-12-31 05:03:27 +00:00
char linkhdr[LLE_MAX_LINKHDR];
size_t linkhdrsize;
int lladdr_off;
KASSERT(l3addr->sa_family == AF_INET,
("sin_family %d", l3addr->sa_family));
/*
* A route that covers the given address must have
* been installed 1st because we are doing a resolution,
* verify this.
*/
if (!(flags & LLE_IFADDR) &&
in_lltable_rtcheck(ifp, flags, l3addr) != 0)
return (NULL);
lle = in_lltable_new(sin->sin_addr, flags);
if (lle == NULL) {
log(LOG_INFO, "lla_lookup: new lle malloc failed\n");
return (NULL);
}
lle->la_flags = flags;
Remove LLE read lock from IPv4 fast path. LLE structure is mostly unchanged during its lifecycle. To be more specific, there are 2 things relevant for fast path lookup code: 1) link-level address change. Since r286722, these updates are performed under AFDATA WLOCK. 2) Some sort of feedback indicating that this particular entry is used so we re-send arp request to perform reachability verification instead of expiring entry. The only signal that is needed from fast path is something like binary yes/no. The latter is solved by the following changes: 1) introduce special r_skip_req field which is read lockless by fast path, but updated under (new) req_mutex mutex. If this field is non-zero, then fast path will acquire lock and set it back to 0. 2) introduce simple state machine: incomplete->reachable<->verify->deleted. Before that we implicitely had incomplete->reachable->deleted state machine, with V_arpt_keep between "reachable" and "deleted". Verification was performed in runtime 5 seconds before V_arpt_keep expire. This is changed to "change state to verify 5 seconds before V_arpt_keep, set r_skip_req to non-zero value and check it every second". If the value is zero - then send arp verification probe. These changes do not introduce any signifficant control plane overhead: typically lle callout timer would fire 1 time more each V_arpt_keep (1200s) for used lles and up to arp_maxtries (5) for dead lles. As a result, all packets towards "reachable" lle are handled by fast path without acquiring lle read lock. Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler might keep LLE lock for signifficant amount of time, which might not be feasible for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock). Differential Revision: https://reviews.freebsd.org/D3688
2015-12-05 09:50:37 +00:00
if (flags & LLE_STATIC)
lle->r_flags |= RLLE_VALID;
if ((flags & LLE_IFADDR) == LLE_IFADDR) {
Implement interface link header precomputation API. Add if_requestencap() interface method which is capable of calculating various link headers for given interface. Right now there is support for INET/INET6/ARP llheader calculation (IFENCAP_LL type request). Other types are planned to support more complex calculation (L2 multipath lagg nexthops, tunnel encap nexthops, etc..). Reshape 'struct route' to be able to pass additional data (with is length) to prepend to mbuf. These two changes permits routing code to pass pre-calculated nexthop data (like L2 header for route w/gateway) down to the stack eliminating the need for other lookups. It also brings us closer to more complex scenarios like transparently handling MPLS nexthops and tunnel interfaces. Last, but not least, it removes layering violation introduced by flowtable code (ro_lle) and simplifies handling of existing if_output consumers. ARP/ND changes: Make arp/ndp stack pre-calculate link header upon installing/updating lle record. Interface link address change are handled by re-calculating headers for all lles based on if_lladdr event. After these changes, arpresolve()/nd6_resolve() returns full pre-calculated header for supported interfaces thus simplifying if_output(). Move these lookups to separate ether_resolve_addr() function which ether returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr() compat versions to return link addresses instead of pre-calculated data. BPF changes: Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT. Despite the naming, both of there have ther header "complete". The only difference is that interface source mac has to be filled by OS for AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside BPF and not pollute if_output() routines. Convert BPF to pass prepend data via new 'struct route' mechanism. Note that it does not change non-optimized if_output(): ro_prepend handling is purely optional. Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI. It is not needed for ethernet anymore. The only remaining FDDI user is dev/pdq mostly untouched since 2007. FDDI support was eliminated from OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65). Flowtable changes: Flowtable violates layering by saving (and not correctly managing) rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated header data from that lle. Differential Revision: https://reviews.freebsd.org/D4102
2015-12-31 05:03:27 +00:00
linkhdrsize = LLE_MAX_LINKHDR;
if (lltable_calc_llheader(ifp, AF_INET, IF_LLADDR(ifp),
linkhdr, &linkhdrsize, &lladdr_off) != 0) {
NET_EPOCH_CALL(in_lltable_destroy_lle_unlocked, &lle->lle_epoch_ctx);
Implement interface link header precomputation API. Add if_requestencap() interface method which is capable of calculating various link headers for given interface. Right now there is support for INET/INET6/ARP llheader calculation (IFENCAP_LL type request). Other types are planned to support more complex calculation (L2 multipath lagg nexthops, tunnel encap nexthops, etc..). Reshape 'struct route' to be able to pass additional data (with is length) to prepend to mbuf. These two changes permits routing code to pass pre-calculated nexthop data (like L2 header for route w/gateway) down to the stack eliminating the need for other lookups. It also brings us closer to more complex scenarios like transparently handling MPLS nexthops and tunnel interfaces. Last, but not least, it removes layering violation introduced by flowtable code (ro_lle) and simplifies handling of existing if_output consumers. ARP/ND changes: Make arp/ndp stack pre-calculate link header upon installing/updating lle record. Interface link address change are handled by re-calculating headers for all lles based on if_lladdr event. After these changes, arpresolve()/nd6_resolve() returns full pre-calculated header for supported interfaces thus simplifying if_output(). Move these lookups to separate ether_resolve_addr() function which ether returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr() compat versions to return link addresses instead of pre-calculated data. BPF changes: Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT. Despite the naming, both of there have ther header "complete". The only difference is that interface source mac has to be filled by OS for AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside BPF and not pollute if_output() routines. Convert BPF to pass prepend data via new 'struct route' mechanism. Note that it does not change non-optimized if_output(): ro_prepend handling is purely optional. Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI. It is not needed for ethernet anymore. The only remaining FDDI user is dev/pdq mostly untouched since 2007. FDDI support was eliminated from OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65). Flowtable changes: Flowtable violates layering by saving (and not correctly managing) rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated header data from that lle. Differential Revision: https://reviews.freebsd.org/D4102
2015-12-31 05:03:27 +00:00
return (NULL);
}
Implement interface link header precomputation API. Add if_requestencap() interface method which is capable of calculating various link headers for given interface. Right now there is support for INET/INET6/ARP llheader calculation (IFENCAP_LL type request). Other types are planned to support more complex calculation (L2 multipath lagg nexthops, tunnel encap nexthops, etc..). Reshape 'struct route' to be able to pass additional data (with is length) to prepend to mbuf. These two changes permits routing code to pass pre-calculated nexthop data (like L2 header for route w/gateway) down to the stack eliminating the need for other lookups. It also brings us closer to more complex scenarios like transparently handling MPLS nexthops and tunnel interfaces. Last, but not least, it removes layering violation introduced by flowtable code (ro_lle) and simplifies handling of existing if_output consumers. ARP/ND changes: Make arp/ndp stack pre-calculate link header upon installing/updating lle record. Interface link address change are handled by re-calculating headers for all lles based on if_lladdr event. After these changes, arpresolve()/nd6_resolve() returns full pre-calculated header for supported interfaces thus simplifying if_output(). Move these lookups to separate ether_resolve_addr() function which ether returs error or fully-prepared link header. Add <arp|nd6_>resolve_addr() compat versions to return link addresses instead of pre-calculated data. BPF changes: Raw bpf writes occupied _two_ cases: AF_UNSPEC and pseudo_AF_HDRCMPLT. Despite the naming, both of there have ther header "complete". The only difference is that interface source mac has to be filled by OS for AF_UNSPEC (controlled via BIOCGHDRCMPLT). This logic has to stay inside BPF and not pollute if_output() routines. Convert BPF to pass prepend data via new 'struct route' mechanism. Note that it does not change non-optimized if_output(): ro_prepend handling is purely optional. Side note: hackish pseudo_AF_HDRCMPLT is supported for ethernet and FDDI. It is not needed for ethernet anymore. The only remaining FDDI user is dev/pdq mostly untouched since 2007. FDDI support was eliminated from OpenBSD in 2013 (sys/net/if_fddisubr.c rev 1.65). Flowtable changes: Flowtable violates layering by saving (and not correctly managing) rtes/lles. Instead of passing lle pointer, pass pointer to pre-calculated header data from that lle. Differential Revision: https://reviews.freebsd.org/D4102
2015-12-31 05:03:27 +00:00
lltable_set_entry_addr(ifp, lle, linkhdr, linkhdrsize,
lladdr_off);
2015-11-07 11:12:00 +00:00
lle->la_flags |= LLE_STATIC;
Remove LLE read lock from IPv4 fast path. LLE structure is mostly unchanged during its lifecycle. To be more specific, there are 2 things relevant for fast path lookup code: 1) link-level address change. Since r286722, these updates are performed under AFDATA WLOCK. 2) Some sort of feedback indicating that this particular entry is used so we re-send arp request to perform reachability verification instead of expiring entry. The only signal that is needed from fast path is something like binary yes/no. The latter is solved by the following changes: 1) introduce special r_skip_req field which is read lockless by fast path, but updated under (new) req_mutex mutex. If this field is non-zero, then fast path will acquire lock and set it back to 0. 2) introduce simple state machine: incomplete->reachable<->verify->deleted. Before that we implicitely had incomplete->reachable->deleted state machine, with V_arpt_keep between "reachable" and "deleted". Verification was performed in runtime 5 seconds before V_arpt_keep expire. This is changed to "change state to verify 5 seconds before V_arpt_keep, set r_skip_req to non-zero value and check it every second". If the value is zero - then send arp verification probe. These changes do not introduce any signifficant control plane overhead: typically lle callout timer would fire 1 time more each V_arpt_keep (1200s) for used lles and up to arp_maxtries (5) for dead lles. As a result, all packets towards "reachable" lle are handled by fast path without acquiring lle read lock. Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler might keep LLE lock for signifficant amount of time, which might not be feasible for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock). Differential Revision: https://reviews.freebsd.org/D3688
2015-12-05 09:50:37 +00:00
lle->r_flags |= (RLLE_VALID | RLLE_IFADDR);
}
return (lle);
}
/*
* Return NULL if not found or marked for deletion.
* If found return lle read locked.
*/
static struct llentry *
in_lltable_lookup(struct lltable *llt, u_int flags, const struct sockaddr *l3addr)
{
const struct sockaddr_in *sin = (const struct sockaddr_in *)l3addr;
struct llentry *lle;
IF_AFDATA_LOCK_ASSERT(llt->llt_ifp);
KASSERT(l3addr->sa_family == AF_INET,
("sin_family %d", l3addr->sa_family));
KASSERT((flags & (LLE_UNLOCKED | LLE_EXCLUSIVE)) !=
(LLE_UNLOCKED | LLE_EXCLUSIVE),
("wrong lle request flags: %#x", flags));
lle = in_lltable_find_dst(llt, sin->sin_addr);
if (lle == NULL)
return (NULL);
Remove LLE read lock from IPv4 fast path. LLE structure is mostly unchanged during its lifecycle. To be more specific, there are 2 things relevant for fast path lookup code: 1) link-level address change. Since r286722, these updates are performed under AFDATA WLOCK. 2) Some sort of feedback indicating that this particular entry is used so we re-send arp request to perform reachability verification instead of expiring entry. The only signal that is needed from fast path is something like binary yes/no. The latter is solved by the following changes: 1) introduce special r_skip_req field which is read lockless by fast path, but updated under (new) req_mutex mutex. If this field is non-zero, then fast path will acquire lock and set it back to 0. 2) introduce simple state machine: incomplete->reachable<->verify->deleted. Before that we implicitely had incomplete->reachable->deleted state machine, with V_arpt_keep between "reachable" and "deleted". Verification was performed in runtime 5 seconds before V_arpt_keep expire. This is changed to "change state to verify 5 seconds before V_arpt_keep, set r_skip_req to non-zero value and check it every second". If the value is zero - then send arp verification probe. These changes do not introduce any signifficant control plane overhead: typically lle callout timer would fire 1 time more each V_arpt_keep (1200s) for used lles and up to arp_maxtries (5) for dead lles. As a result, all packets towards "reachable" lle are handled by fast path without acquiring lle read lock. Additional "req_mutex" is needed because callout / arpresolve_slow() or eventhandler might keep LLE lock for signifficant amount of time, which might not be feasible for fast path locking (e.g. having rmlock as ether AFDATA or lltable own lock). Differential Revision: https://reviews.freebsd.org/D3688
2015-12-05 09:50:37 +00:00
if (flags & LLE_UNLOCKED)
return (lle);
if (flags & LLE_EXCLUSIVE)
LLE_WLOCK(lle);
else
LLE_RLOCK(lle);
2012-08-01 09:00:26 +00:00
/*
* If the afdata lock is not held, the LLE may have been unlinked while
* we were blocked on the LLE lock. Check for this case.
*/
if (__predict_false((lle->la_flags & LLE_LINKED) == 0)) {
if (flags & LLE_EXCLUSIVE)
LLE_WUNLOCK(lle);
else
LLE_RUNLOCK(lle);
return (NULL);
}
return (lle);
}
static int
in_lltable_dump_entry(struct lltable *llt, struct llentry *lle,
struct sysctl_req *wr)
{
struct ifnet *ifp = llt->llt_ifp;
/* XXX stack use */
struct {
struct rt_msghdr rtm;
struct sockaddr_in sin;
struct sockaddr_dl sdl;
} arpc;
struct sockaddr_dl *sdl;
int error;
2012-08-01 09:00:26 +00:00
bzero(&arpc, sizeof(arpc));
/* skip deleted entries */
if ((lle->la_flags & LLE_DELETED) == LLE_DELETED)
return (0);
/* Skip if jailed and not a valid IP of the prison. */
lltable_fill_sa_entry(lle,(struct sockaddr *)&arpc.sin);
if (prison_if(wr->td->td_ucred, (struct sockaddr *)&arpc.sin) != 0)
return (0);
/*
* produce a msg made of:
* struct rt_msghdr;
* struct sockaddr_in; (IPv4)
* struct sockaddr_dl;
*/
arpc.rtm.rtm_msglen = sizeof(arpc);
arpc.rtm.rtm_version = RTM_VERSION;
arpc.rtm.rtm_type = RTM_GET;
arpc.rtm.rtm_flags = RTF_UP;
arpc.rtm.rtm_addrs = RTA_DST | RTA_GATEWAY;
/* publish */
if (lle->la_flags & LLE_PUB)
arpc.rtm.rtm_flags |= RTF_ANNOUNCE;
sdl = &arpc.sdl;
sdl->sdl_family = AF_LINK;
sdl->sdl_len = sizeof(*sdl);
sdl->sdl_index = ifp->if_index;
sdl->sdl_type = ifp->if_type;
if ((lle->la_flags & LLE_VALID) == LLE_VALID) {
sdl->sdl_alen = ifp->if_addrlen;
bcopy(lle->ll_addr, LLADDR(sdl), ifp->if_addrlen);
} else {
sdl->sdl_alen = 0;
bzero(LLADDR(sdl), ifp->if_addrlen);
}
arpc.rtm.rtm_rmx.rmx_expire =
lle->la_flags & LLE_STATIC ? 0 : lle->la_expire;
arpc.rtm.rtm_flags |= (RTF_HOST | RTF_LLDATA);
if (lle->la_flags & LLE_STATIC)
arpc.rtm.rtm_flags |= RTF_STATIC;
if (lle->la_flags & LLE_IFADDR)
arpc.rtm.rtm_flags |= RTF_PINNED;
arpc.rtm.rtm_index = ifp->if_index;
error = SYSCTL_OUT(wr, &arpc, sizeof(arpc));
return (error);
}
static struct lltable *
in_lltattach(struct ifnet *ifp)
{
struct lltable *llt;
llt = lltable_allocate_htbl(IN_LLTBL_DEFAULT_HSIZE);
llt->llt_af = AF_INET;
llt->llt_ifp = ifp;
llt->llt_lookup = in_lltable_lookup;
llt->llt_alloc_entry = in_lltable_alloc;
llt->llt_delete_entry = in_lltable_delete_entry;
llt->llt_dump_entry = in_lltable_dump_entry;
llt->llt_hash = in_lltable_hash;
llt->llt_fill_sa_entry = in_lltable_fill_sa_entry;
llt->llt_free_entry = in_lltable_free_entry;
llt->llt_match_prefix = in_lltable_match_prefix;
llt->llt_mark_used = llentry_mark_used;
lltable_link(llt);
return (llt);
}
void *
in_domifattach(struct ifnet *ifp)
{
struct in_ifinfo *ii;
ii = malloc(sizeof(struct in_ifinfo), M_IFADDR, M_WAITOK|M_ZERO);
ii->ii_llt = in_lltattach(ifp);
ii->ii_igmp = igmp_domifattach(ifp);
return (ii);
}
void
in_domifdetach(struct ifnet *ifp, void *aux)
{
struct in_ifinfo *ii = (struct in_ifinfo *)aux;
igmp_domifdetach(ifp);
lltable_free(ii->ii_llt);
free(ii, M_IFADDR);
}