freebsd-dev/release/bininst

#!/stand/sh
#
# bininst - perform the last stage of installation by somehow getting
# a bindist onto the user's disk and unpacking it.  The name bininst
# is actually something of a misnomer, since this utility will install
# more than just the bindist set.
#
# November 11th, 1994
# Copyright (C) 1994 by Jordan K. Hubbard
#
# Permission to copy or use this software for any purpose is granted
# provided that this message stay intact, and at this location (no putting
# your name on top after doing something trivial like reindenting it, just
# to make it look like you wrote it!).
#

# Some useful constants.
PATH=/usr/bin:/usr/sbin:/bin:/sbin:/stand
export PATH
TAR=tar
TAR_FLAGS=xvf
TMP=/tmp
IFCONFIG=ifconfig
ROUTE=route
ROUTE_FLAGS="add default"

# Set the initial state of the system.
set_defaults() {
	media_type="" ;
	media_device="" ;
	ipaddr="" ;
	hostname="" ;
	ether_intr="" ;
	domain="" ;
	netmask="" ;
	ifconfig_flags="" ;
	tmp_dir="/usr/tmp" ;
	installing=1 ;
	mkdir -p ${TMP}
}

# Handle the return value from a dialog, doing some pre-processing
# so that each client doesn't have to.
handle_rval() {
	case $1 in
	0)
		return 0
	;;
	255)
		PS1="subshell# " /stand/sh
	;;
	*)
		return 1
	;;
	esac
}

# A simple user-confirmation dialog.
confirm() {
	dialog --title "Please Confirm" --msgbox "$*" 6 72
}

# A simple error dialog.
error() {
	dialog --title "Error!" --msgbox "$*" 10 72
}

# Something isn't supported yet! :-(
not_supported() {
	dialog --title "Sorry!" \
	--msgbox "This feature is not supported in the current version of the \
installation tools.  Barring some sort of fatal accident, we do \
expect it to be in the release.  Please press RETURN to go on." 10 60
}

# Print welcome banner.
welcome() {
	dialog --title "Welcome to FreeBSD" --clear \
--msgbox "Hi!  Nice to see you've made it this far.  We're now ready to
install one or more packed distribution sets onto your machine.
At the minimum, you need a bindist installation though a
secrdist is also useful if you want your system to have any kind
of effective security.  The secrdist is a bit of a special case
since it cannot be legally obtained from the U.S. due to export
restrictions, but non-U.S. versions are also available.  See the
release notes for more information on where to obtain a secrdist
for your part of the world." 15 72
	if ! handle_rval $?; then return 1; fi
}

# Get values into $media_type and $media_device.  Call network initialization
# if necessary.
choose_media() {
	while [ "$media_device" = "" ]; do

	dialog --clear --title "Chose installation media" \
--menu "Before we begin the installation, we need to chose and possibly \n\
configure your method of installation.  Please pick from one of \n\
the following options.  If your option isn't listed here, your \n\
best bet may be to simply hit ESC twice to get a shell and proceed \n\
manually on your own. \n\n\
	Please choose one of the following:" 20 72 5 \
	"Tape" "Load installation from SCSI or QIC tape" \
	"CDROM" "Load installation from SCSI or Mitsumi CDROM" \
        "DOS" "Load from DOS floppies or a DOS hard disk partition" \
        "FTP" "Load the distribution over ftp" \
        "NFS" "Load the distribution over NFS" 2> ${TMP}/menu.tmp.$$

	retval=$?
	choice=`cat ${TMP}/menu.tmp.$$`
	rm -f ${TMP}/menu.tmp.$$
	if ! handle_rval $retval; then return 1; fi

	case $choice in
	Tape)
		dialog --clear --title "Chose tape type" \
--menu "Which type of tape drive do you have attached to your \n\
system?  FreeBSD supports the following types:\n\n\
		Choose one of the following:" 20 72 2 \
		"SCSI" "SCSI tape drive attached to supported SCSI controller" \
		"QIC" "QIC tape drive (Colorado Jumbo, etc)" \
			2> ${TMP}/menu.tmp.$$
		retval=$?
		choice=`cat ${TMP}/menu.tmp.$$`
		rm -f ${TMP}/menu.tmp.$$
		if ! handle_rval $retval; then continue; fi
		media_type=tape;
		case $choice in
			SCSI)
				media_device=/dev/rst0
			;;
			QIC)
				media_device=/dev/rwt0
			;;
		esac
	;;
	CDROM)
		dialog --clear --title "Chose CDROM type" \
--menu "Which type of CDROM drive do you have attached to your \n\
system?  FreeBSD supports the following types:\n\n\
		Choose one of the following:" 15 72 2 \
		"SCSI" "SCSI CDROM drive attached to supported SCSI controller" \
		"Mitsumi" "Mitsumi CDROM drive" \
			2> ${TMP}/menu.tmp.$$
		retval=$?
		choice=`cat ${TMP}/menu.tmp.$$`
		rm -f ${TMP}/menu.tmp.$$
		if ! handle_rval $retval; then continue; fi
		media_type=cdrom;
		case $choice in
			SCSI)
				media_device=/dev/cd0d
			;;
			Mitsumi)
				media_device=/dev/mcd0d
			;;
		esac
	;;
	DOS)
		not_supported
	;;
	FTP)
		if ! setup_network; then continue; fi
		dialog --title "FTP Installation Information" --clear \
--inputbox "Please specify the machine and directory location of the
distribution you wish to load.  This should be either a \"URL style\"
specification (e.g. something like ftp://ftp.freeBSD.org/pub/...) or
simply the name of a host to connect to.  If only a host name is
specified, the installation assumes that you will properly connect
and \"mget\" the files yourself.\n\n" \
16 72 "ftp://ftp.freebsd.org/pub/FreeBSD/2.0-ALPHA/bindist/" 2> ${TMP}/inputbox.tmp.$$
		if ! handle_rval $?; then continue; fi
		media_type=ftp
		media_device=`cat ${TMP}/inputbox.tmp.$$`
		rm -f ${TMP}/inputbox.tmp.$$
	;;
	NFS)
		setup_network
		not_supported
	;;
	esac
	done
}

# Set the location of our temporary unpacking directory.
set_tmpdir()
{
	dialog --title "Chose temporary directory" --clear \
--inputbox "Please specify the name of a directory containing enough
free space to hold the temporary files for this distribution.
At minimum, a binary distribution will require around 10MB.
At maximum, a srcdist may take 60MB or more.  If the directory
you specify does not exist, it will be created for you.\n\n" \
16 72 "/usr/tmp" 2> ${TMP}/inputbox.tmp.$$
	if ! handle_rval $?; then return 1; fi
	tmp_dir=`cat ${TMP}/inputbox.tmp.$$`
	rm -f ${TMP}/inputbox.tmp.$$
	mkdir -p $tmp_dir
	echo wahoo
	return 0
}

cd_tmpdir()
{
	if ! cd $tmp_dir; then
		error "No such file or directory for ${tmp_dir}, sorry!  Please fix this and try again."
		return 1
	fi
}

rm_tmpdir()
{
	if dialog --title "Delete contents?" --clear \
        --yesno "Do you wish to delete the contents of ${tmp_dir}?" 5 72; then
		rm -rf $tmp_dir/*
	fi
}

setup_network_ether()
{
	dialog --clear --title "Ethernet Interface Name" \
	--menu "Please select the type of ethernet device you have:\n\n" \
	 20 76 5 \
	"ed0" "WD80x3, SMC, Novell NE[21]000 or 3C503 generic NIC at 0x280/5" \
	"ed1" "Same as above, but at address 0x300 and IRQ 5" \
	"ed2" "Same as above, but at address 0x300 and IRQ 10" \
	"ie0" "AT&T StarLan and EN100 family at 0x360 and IRQ 7" \
	"is0" "Isolan 4141-0 or Isolink 4110 at 0x280 and IRQ 7" \
	  2> ${TMP}/menu.tmp.$$

	retval=$?
	interface=`cat ${TMP}/menu.tmp.$$`
	rm -f ${TMP}/menu.tmp.$$
	if ! handle_rval $retval; then return 1; fi
}

setup_network_slip()
{
	not_supported
}

setup_network_ppp()
{
	not_supported
}

setup_network_plip()
{
	not_supported
}

setup_network()
{
	done=0
	while [ "$interface" = "" ]; do
	dialog --clear --title "Set up network interface" \
	--menu "Please select the type of network connection you have:\n\n" \
	20 72 4 \
	"ether" "A supported ethernet card" \
	"SLIP" "A point-to-point SLIP (Serial Line IP) connection" \
        "PPP" "A point-to-point protocol link" \
        "PLIP" "A Parallel-Line IP setup (sort of like lap-link)" \
        2> ${TMP}/menu.tmp.$$

	retval=$?
	choice=`cat ${TMP}/menu.tmp.$$`
	rm -f ${TMP}/menu.tmp.$$
	if ! handle_rval $retval; then return 1; fi
	case $choice in
	ether)
		if ! setup_network_ether; then continue; fi
	;;

	SLIP)
		if ! setup_network_slip; then continue; fi
	;;

	PPP)
		if ! setup_network_ppp; then continue; fi
	;;

	PLIP)
		if ! setup_network_plip; then continue; fi
	;;
	esac	
	if [ "$interface" = "" ]; then	continue; fi
	dialog --title "Hostname Information" --clear \
	--inputbox "Please specify the name of this host" 5 60 "foo" \
	2> ${TMP}/inputbox.tmp.$$
	if ! handle_rval $?; then return 1; fi
	hostname=`cat ${TMP}/inputbox.tmp.$$`
	rm -f ${TMP}/inputbox.tmp.$$

	dialog --title "Address Information" --clear \
	--inputbox "Please specify the IP address of this host" 5 60 "" \
	2> ${TMP}/inputbox.tmp.$$
	if ! handle_rval $?; then return 1; fi
	ipaddr=`cat ${TMP}/inputbox.tmp.$$`
	rm -f ${TMP}/inputbox.tmp.$$

	dialog --title "Netmask Information" --clear \
	--inputbox "Please specify the netmask" 5 60 "0xffffff00" \
	2> ${TMP}/inputbox.tmp.$$
	if handle_rval $?; then
		netmask=`cat ${TMP}/inputbox.tmp.$$`
	else
		netmask="0xffffff00"
	fi
	rm -f ${TMP}/inputbox.tmp.$$

	dialog --title "Extra Information" --clear \
	--inputbox "Any extra flags to ifconfig?" 5 60 "" \
	2> ${TMP}/inputbox.tmp.$$
	if handle_rval $?; then
		ifconfig_flags=`cat ${TMP}/inputbox.tmp.$$`
	fi
	if ! $IFCONFIG $interface netmask $netmask $ifconfig_flags 2>/dev/ttyv1 ; then
		error "Unable to configure interface $interface"
		ipaddr=""; interface=""
		continue
	fi
	rm -f ${TMP}/inputbox.tmp.$$

	dialog --title "Gateway host" --clear \
	--inputbox "Please specify the gateway host, if any" 5 60 "" \
	2> ${TMP}/inputbox.tmp.$$
	if handle_rval $?; then
		gateway=`cat ${TMP}/inputbox.tmp.$$`
		if [ "$gateway" = "" ]; then
			:;
		else
			$ROUTE $route_flags $gateway 2>/dev/ttyv1
		fi
	fi
	rm -f ${TMP}/inputbox.tmp.$$
	done
}

install_set()
{
	case $media_type in
	tape)
		if ! set_tmpdir; then return; fi
		if ! cd_tmpdir; then return; fi
		confirm "Please mount tape for ${media_device}."
		dialog --title "Results of tape extract" --clear \
			--prgbox "$TAR $TAR_FLAGS $media_device" 10 72
		if [ -f extract.sh ]; then
			sh ./extract.sh
		else
			error "This isn't a proper distribution.  No installation script found."
		fi
		rm_tmpdir
	;;

	cdrom)
		not_supported
		return
	;;

	dos)
		if ! set_tmpdir; then return; fi
		if ! cd_tmpdir; then return; fi
		not_supported
		return
	;;
	ftp)
		if ! set_tmpdir; then return; fi
		if ! cd_tmpdir; then return; fi
		if ! echo $media_device | grep -v 'ftp://'; then
			if ! ncftp $media_device/* ; then
				error "Couldn't fetch distribution from ${media_device}!"
			else
				if [ -f extract.sh ]; then
					sh ./extract.sh
				else
					error "This isn't a proper distribution.  No installation script found."
				fi
			fi
		else
			ftp $media_device
			if [ -f extract.sh ]; then
				sh ./extract.sh
			else
				error "No installation script found.  Please grab the right bits."
			fi
		fi
		rm_tmpdir
		return
	;;

	nfs)
		not_supported
		return
	;;
	esac
}

do_last_config()
{
	dialog --title "Aufwiedersehen!" \
--msgbox "We now come to the end of the installation.  At this point in
time, there's nothing fancy here, but for the release we plan to
ask some additional questions about time zone setup, your name
server, what sort of mail client this host is, etc.  We just ran
out of time for ALPHA!  At the very least, you may wish to check
out the 'tzsetup' command - it will at least handle the first
checklist item for you.  Thanks!" 15 72
}

welcome
set_defaults

while [ $installing -eq 1 ]; do
	if choose_media; then
		install_set
		media_device=""; media_type=""
	else
		do_last_config
		installing=0
	fi
done
exec /stand/sh