freebsd-dev/usr.sbin/sicontrol/sicontrol.8

.\" $Id: sicontrol.8,v 1.2 1995/09/26 18:18:49 peter Exp $
.\" The following requests are required for all man pages.
.Dd September 26,1995
.Dt SICONTROL 8
.Os FreeBSD
.Sh NAME
.Nm sicontrol
.Nd Specialix SI/XIO driver configuration and debugging
.Sh SYNOPSIS
.Nm sicontrol
device
.Ar command Op Cm Ar param ...
.Sh DESCRIPTION
.Nm sicontrol
is used to configure and monitor the SI/XIO device driver.
.Pp
.Nm sicontrol
operates on the specified
.Ar device
to indicate which port is to be used.
.Pp
The special
.Ar device
string `-' is used to indicate the global driver settings instead.
.Pp
A '/dev/' is included if necessary.
.Pp
The following commands are used for the global settings and should be
specified with the '-' device name.
.Bl -tag -width 4n
.It Cm int_throttle Op Cm value
Configure the `aggregate interrupt throttle value'.
The maximum number of host adapter interrupts per second is determined by:
.Pp
.Ar "controller CPU clock / (8 * int_throttle)"
.Pp
The default value at boot time is 25000.  The host adapter cpu clock is
25Mhz.  This gives a maximum interrupt rate of about 125 interrupts per
second.
.Pp
Lowering this value will increase the rate in which the host adapter can
interrupt the operating system for attention.
.\"
.It Cm rxint_throttle Op Cm value
Configure the receiver interrupt throttle value.
The default value of 4 at boot time allows an interrupt rate of
approximately 25.
.Pp
Lowering this value will increase the rate in which the host adapter can
interrupt the operating system to empty the receiver fifos.
.\"
.It Cm nport
Returns the number of ports under the control of the device driver.
.El
.Pp
The following commands are used for the individual ports and should be
specified with a device name from /dev.
.Bl -tag -width 4n
.It Cm mstate
Shows the current incoming modem control signals.
.It Cm ccbstat
Shows the current "ccb" structure for the specified port. This is not of
much use outside of debugging the driver and determining why a port is
wedged.
.It Cm ttystat
Shows the current "tty" structure that the kernel has for the specified port.
This is not much use outside of debugging the driver.
.El
.\" The following requests should be uncommented and used where appropriate.
.\" This next request is for sections 2 and 3 function return values only.
.\" .Sh RETURN VALUES
.\" This next request is for sections 1, 6, 7 & 8 only
.\" .Sh ENVIRONMENT
.Sh FILES
.Bl -tag -width /dev/si_control -compact
.It Pa /dev/si_control
global driver control file for use by
.Xr sicontrol 8 .
.It Pa /dev/ttyA*
terminal control ports
.It Pa /dev/ttyiA*
initial termios state devices, for use by
.Xr stty 1
.It Pa /dev/ttylA*
locked termios state devices, for use by
.Xr stty 1
.El
.\" .Sh EXAMPLES
.\" This next request is for sections 1, 6, 7 & 8 only
.\"     (command return values (to shell) and fprintf/stderr type diagnostics)
.Sh DIAGNOSTICS
Generally self explanatory.....
.\" The next request is for sections 2 and 3 error and signal handling only.
.\" .Sh ERRORS
.Sh SEE ALSO
.Xr stty 1 ,
.Xr termios 4 ,
.Xr tty 4 ,
.Xr si 4 ,
.Xr comcontrol 8 .
.\" .Sh STANDARDS
.Sh HISTORY
.Nm sicontrol
is loosely based on a utility called
.Nm siconfig
which was written by
.Nm "Andy Rutter <andy@acronym.co.uk>"
.Pp
Specialix International do not support this device driver in any way.
.Sh AUTHORS
Peter Wemm <peter@freebsd.org>
.Sh BUGS
Bound to be many... :-)