Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
/*-
|
|
|
|
|
* Copyright (c) 1998,1999 S<EFBFBD>ren Schmidt
|
|
|
|
|
* All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer,
|
|
|
|
|
* without modification, immediately at the beginning of the file.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
|
|
|
* derived from this software without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
|
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
|
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
|
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
|
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
|
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
|
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*
|
1999-03-07 21:49:14 +00:00
|
|
|
|
* $Id: ata-disk.h,v 1.3 1999/03/05 09:43:30 sos Exp $
|
Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
*/
|
|
|
|
|
|
1999-03-05 09:43:30 +00:00
|
|
|
|
/* ATA device parameter information */
|
|
|
|
|
struct ata_params {
|
|
|
|
|
int16_t config; /* general configuration bits */
|
|
|
|
|
u_int16_t cylinders; /* number of cylinders */
|
|
|
|
|
int16_t reserved2;
|
|
|
|
|
u_int16_t heads; /* # heads */
|
|
|
|
|
int16_t unfbytespertrk; /* # unformatted bytes/track */
|
|
|
|
|
int16_t unfbytes; /* # unformatted bytes/sector */
|
|
|
|
|
u_int16_t sectors; /* # sectors/track */
|
|
|
|
|
int16_t vendorunique[3];
|
|
|
|
|
int8_t serial[20]; /* serial number */
|
|
|
|
|
int16_t buffertype; /* buffer type */
|
|
|
|
|
#define ATA_BT_SINGLEPORTSECTOR 1 /* 1 port, 1 sector buffer */
|
|
|
|
|
#define ATA_BT_DUALPORTMULTI 2 /* 2 port, mult sector buffer */
|
|
|
|
|
#define ATA_BT_DUALPORTMULTICACHE 3 /* above plus track cache */
|
|
|
|
|
|
|
|
|
|
int16_t buffersize; /* buf size, 512-byte units */
|
|
|
|
|
int16_t necc; /* ecc bytes appended */
|
|
|
|
|
int8_t revision[8]; /* firmware revision */
|
|
|
|
|
int8_t model[40]; /* model name */
|
|
|
|
|
int8_t nsecperint; /* sectors per interrupt */
|
|
|
|
|
int8_t vendorunique1;
|
|
|
|
|
int16_t usedmovsd; /* double word read/write? */
|
|
|
|
|
int8_t vendorunique2;
|
|
|
|
|
int8_t capability; /* various capability bits */
|
|
|
|
|
int16_t cap_validate; /* validation for above */
|
|
|
|
|
int8_t vendorunique3;
|
|
|
|
|
int8_t opiomode; /* PIO modes 0-2 */
|
|
|
|
|
int8_t vendorunique4;
|
|
|
|
|
int8_t odmamode; /* old DMA modes, not ATA-3 */
|
|
|
|
|
int16_t atavalid; /* fields valid */
|
|
|
|
|
int16_t currcyls;
|
|
|
|
|
int16_t currheads;
|
|
|
|
|
int16_t currsectors;
|
|
|
|
|
int16_t currsize0;
|
|
|
|
|
int16_t currsize1;
|
|
|
|
|
int8_t currmultsect;
|
|
|
|
|
int8_t multsectvalid;
|
|
|
|
|
int32_t lbasize;
|
|
|
|
|
int16_t dmasword; /* obsolete in ATA-3 */
|
|
|
|
|
int16_t dmamword; /* multiword DMA modes */
|
|
|
|
|
int16_t eidepiomodes; /* advanced PIO modes */
|
|
|
|
|
int16_t eidedmamin; /* fastest DMA timing */
|
|
|
|
|
int16_t eidedmanorm; /* recommended DMA timing */
|
|
|
|
|
int16_t eidepioblind; /* fastest possible blind PIO */
|
|
|
|
|
int16_t eidepioacked; /* fastest possible IORDY PIO */
|
|
|
|
|
int16_t reserved69;
|
|
|
|
|
int16_t reserved70;
|
|
|
|
|
int16_t reserved71;
|
|
|
|
|
int16_t reserved72;
|
|
|
|
|
int16_t reserved73;
|
|
|
|
|
int16_t reserved74;
|
|
|
|
|
int16_t queuelen;
|
|
|
|
|
int16_t reserved76;
|
|
|
|
|
int16_t reserved77;
|
|
|
|
|
int16_t reserved78;
|
|
|
|
|
int16_t reserved79;
|
|
|
|
|
int16_t versmajor;
|
|
|
|
|
int16_t versminor;
|
|
|
|
|
int16_t featsupp1;
|
|
|
|
|
int16_t featsupp2;
|
|
|
|
|
int16_t featsupp3;
|
|
|
|
|
int16_t featenab1;
|
|
|
|
|
int16_t featenab2;
|
|
|
|
|
int16_t featenab3;
|
|
|
|
|
int16_t udmamode; /* UltraDMA modes */
|
|
|
|
|
int16_t erasetime;
|
|
|
|
|
int16_t enherasetime;
|
|
|
|
|
int16_t apmlevel;
|
|
|
|
|
int16_t reserved92[34];
|
|
|
|
|
int16_t rmvcap;
|
|
|
|
|
int16_t securelevel;
|
|
|
|
|
};
|
|
|
|
|
|
1999-03-03 21:10:29 +00:00
|
|
|
|
/* Structure describing an ATA disk */
|
Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
struct ad_softc {
|
|
|
|
|
struct ata_softc *controller; /* ptr to parent ctrl */
|
|
|
|
|
struct ata_params *ata_parm; /* ata device params */
|
|
|
|
|
struct diskslices *slices;
|
|
|
|
|
int32_t unit; /* ATA_MASTER or ATA_SLAVE */
|
1999-03-03 21:10:29 +00:00
|
|
|
|
int32_t lun; /* logical unit number */
|
Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
u_int16_t cylinders; /* disk geometry (probed) */
|
|
|
|
|
u_int8_t heads;
|
|
|
|
|
u_int8_t sectors;
|
|
|
|
|
u_int32_t total_secs; /* total # of sectors (LBA) */
|
|
|
|
|
u_int32_t transfersize; /* size of each transfer */
|
|
|
|
|
u_int32_t currentsize; /* size of current transfer */
|
|
|
|
|
struct buf_queue_head queue; /* head of request queue */
|
|
|
|
|
u_int32_t bytecount; /* bytes to transfer */
|
|
|
|
|
u_int32_t donecount; /* bytes transferred */
|
|
|
|
|
u_int32_t active; /* active processing request */
|
|
|
|
|
u_int32_t flags; /* drive flags */
|
|
|
|
|
struct devstat stats; /* devstat entry */
|
1999-03-03 21:10:29 +00:00
|
|
|
|
#define AD_F_LABELLING 0x0001
|
|
|
|
|
#ifdef DEVFS
|
|
|
|
|
void *cdevs_token;
|
|
|
|
|
void *bdevs_token;
|
|
|
|
|
#endif
|
Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
};
|
|
|
|
|
|
|
|
|
|
void ad_transfer(struct buf *);
|
1999-03-07 21:49:14 +00:00
|
|
|
|
int32_t ad_interrupt(struct buf *);
|
Finally!!
The much roumored replacement for our current IDE/ATA/ATAPI is
materialising in the CVS repositories around the globe.
So what does this bring us:
A new reengineered ATA/ATAPI subsystem, that tries to overcome
most of the deficiencies with the current drivers.
It supports PCI as well as ISA devices without all the hackery
in ide_pci.c to make PCI devices look like ISA counterparts.
It doesn't have the excessive wait problem on probe, in fact you
shouldn't notice any delay when your devices are getting probed.
Probing and attaching of devices are postponed until interrupts
are enabled (well almost, not finished yet for disks), making
things alot cleaner.
Improved performance, although DMA support is still WIP and not
in this pre alpha release, worldstone is faster with the new
driver compared to the old even with DMA.
So what does it take away:
There is NO support for old MFM/RLL/ESDI disks.
There is NO support for bad144, if your disk is bad, ditch it, it has
already outgrown its internal spare sectors, and is dying.
For you to try this out, you will have to modify your kernel config
file to use the "ata" controller instead of all wdc? entries.
example:
# for a PCI only system (most modern machines)
controller ata0
device atadisk0 # ATA disks
device atapicd0 # ATAPI CDROM's
device atapist0 # ATAPI tapes
#You should add the following on ISA systems:
controller ata1 at isa? port "IO_WD1" bio irq 14
controller ata2 at isa? port "IO_WD2" bio irq 15
You can leave it all in there, the system knows how to manage.
For now this driver reuses the device entries from the old system
(that will probably change later), but remember that disks are
now numbered in the sequence they are found (like the SCSI system)
not as absolute positions as the old system.
Although I have tested this on all the systems I can get my hands on,
there might very well be gremlins in there, so use AT YOU OWN RISK!!
This is still WIP, so there are lots of rough edges and unfinished
things in there, and what I have in my lab might look very different
from whats in CVS at any given time. So please have all eventual
changes go through me, or chances are they just dissapears...
I would very much like to hear from you, both good and bad news
are very welcome.
Enjoy!!
-Søren
1999-03-01 21:19:19 +00:00
|
|
|
|
|