freebsd-dev/sys/powerpc/powermac/openpic_macio.c

230 lines
5.7 KiB
C
Raw Normal View History

/*-
* Copyright 2003 by Peter Grehan. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
/*
* The macio attachment for the OpenPIC interrupt controller.
* A nexus driver is defined so the number of interrupts can be
* determined early in the boot sequence before the hardware
* is accessed - the interrupt i/f is installed at this time,
* and when h/w is finally accessed, interrupt sources allocated
* prior to this are activated
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kernel.h>
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/intr.h>
#include <machine/intr_machdep.h>
#include <machine/md_var.h>
#include <machine/nexusvar.h>
#include <machine/pio.h>
#include <machine/resource.h>
#include <vm/vm.h>
#include <vm/pmap.h>
#include <sys/rman.h>
#include <machine/openpicvar.h>
#include "pic_if.h"
struct openpic_ofw_softc {
struct openpic_softc osc;
struct resource *sc_memr; /* macio bus resource */
device_t sc_ndev; /* nexus device */
};
static struct openpic_ofw_softc *ofwpicsoftc;
/*
* MacIO interface
*/
static void openpic_ofw_identify(driver_t *, device_t);
static int openpic_ofw_probe(device_t);
static int openpic_ofw_attach(device_t);
static int openpic_macio_probe(device_t);
static int openpic_macio_attach(device_t);
/*
* Nexus attachment
*/
static device_method_t openpic_ofw_methods[] = {
/* Device interface */
DEVMETHOD(device_identify, openpic_ofw_identify),
DEVMETHOD(device_probe, openpic_ofw_probe),
DEVMETHOD(device_attach, openpic_ofw_attach),
/* PIC interface */
DEVMETHOD(pic_allocate_intr, openpic_allocate_intr),
DEVMETHOD(pic_setup_intr, openpic_setup_intr),
DEVMETHOD(pic_teardown_intr, openpic_teardown_intr),
DEVMETHOD(pic_release_intr, openpic_release_intr),
{ 0, 0 }
};
static driver_t openpic_ofw_driver = {
"openpic",
openpic_ofw_methods,
sizeof(struct openpic_ofw_softc)
};
static devclass_t openpic_ofw_devclass;
DRIVER_MODULE(openpic_ofw, nexus, openpic_ofw_driver, openpic_ofw_devclass,
0, 0);
static void
openpic_ofw_identify(driver_t *driver, device_t parent)
{
device_t child;
phandle_t pic;
char type[40];
pic = OF_finddevice("mpic");
if (pic == -1)
return;
OF_getprop(pic, "device_type", type, sizeof(type));
if (strcmp(type, "open-pic") != 0)
return;
child = BUS_ADD_CHILD(parent, 0, "openpic", 0);
if (child != NULL)
nexus_set_device_type(child, "macio");
}
static int
openpic_ofw_probe(device_t dev)
{
char *name;
char *type;
name = nexus_get_name(dev);
type = nexus_get_device_type(dev);
if (strcmp(name, "openpic") != 0 ||
strcmp(type, "macio") != 0)
return (ENXIO);
device_set_desc(dev, OPENPIC_DEVSTR);
return (0);
}
static int
openpic_ofw_attach(device_t dev)
{
KASSERT(ofwpicsoftc == NULL, ("ofw openpic: already probed"));
ofwpicsoftc = device_get_softc(dev);
ofwpicsoftc->sc_ndev = dev;
nexus_install_intcntlr(dev);
openpic_early_attach(dev);
return (0);
}
/*
* MacIO attachment
*/
static device_method_t openpic_macio_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, openpic_macio_probe),
DEVMETHOD(device_attach, openpic_macio_attach),
{ 0, 0 },
};
static driver_t openpic_macio_driver = {
"openpicmacio",
openpic_macio_methods,
0
};
static devclass_t openpic_macio_devclass;
DRIVER_MODULE(openpicmacio, macio, openpic_macio_driver,
openpic_macio_devclass, 0, 0);
static int
openpic_macio_probe(device_t dev)
{
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
2004-08-12 17:41:33 +00:00
const char *type = ofw_bus_get_type(dev);
if (strcmp(type, "open-pic") != 0)
return (ENXIO);
/*
* The description was already printed out in the nexus
* probe, so don't do it again here
*/
device_set_desc(dev, "OpenPIC MacIO interrupt cell");
if (!bootverbose)
device_quiet(dev);
return (0);
}
static int
openpic_macio_attach(device_t dev)
{
struct openpic_ofw_softc *sc;
int rid;
sc = ofwpicsoftc;
KASSERT(sc != NULL, ("pic not nexus-probed\n"));
rid = 0;
sc->sc_memr = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
RF_ACTIVE);
if (sc->sc_memr == NULL) {
device_printf(dev, "Could not alloc mem resource!\n");
return (ENXIO);
}
sc->osc.sc_bt = rman_get_bustag(sc->sc_memr);
sc->osc.sc_bh = rman_get_bushandle(sc->sc_memr);
sc->osc.sc_altdev = dev;
return (openpic_attach(sc->sc_ndev));
}