d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f61dd564dd
freebsd-dev/sys/dev/ath/if_athvar.h

322 lines
13 KiB
C
Raw Normal View History

Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
/*-
update copyright notice for 2004
2004-04-02 23:57:10 +00:00
* Copyright (c) 2002-2004 Sam Leffler, Errno Consulting
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any
* redistribution must be conditioned upon including a substantially
* similar Disclaimer requirement for further binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY
* AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
* THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY,
* OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
* IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
* THE POSSIBILITY OF SUCH DAMAGES.
*
* $FreeBSD$
*/
/*
* Defintions for the Atheros Wireless LAN controller driver.
*/
#ifndef _DEV_ATH_ATHVAR_H
#define _DEV_ATH_ATHVAR_H
#include <sys/taskqueue.h>
#include <contrib/dev/ath/ah.h>
Add support for the experimental radiotap capture format. With this we no longer need the debugging code to dump packets.
2003-09-05 22:22:49 +00:00
#include <net80211/ieee80211_radiotap.h>
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
#include <dev/ath/if_athioctl.h>
#define ATH_TIMEOUT 1000
#define ATH_RXBUF 40 /* number of RX buffers */
#define ATH_TXBUF 60 /* number of TX buffers */
#define ATH_TXDESC 8 /* number of descriptors per buffer */
Maintain a history of data associated with received frames and use this to calculate smoothed signal quality data for each node. o add a 16-deep history buffer to each driver-private node storage that holds rssi and antenna info for received frames o override the default per-node "get rssi" method to return an average rssi value based on samples collected over the last second o enable beacon reception so even idle systems maintain a running history of signal quality This data may also be useful for improving the rate control algorithm. Based on work by Tom Marshall <tommy@home.tig-grr.com> for MADWIFI.
2003-09-15 22:34:46 +00:00
struct ath_recv_hist {
int arh_ticks; /* sample time by system clock */
u_int8_t arh_rssi; /* rssi */
u_int8_t arh_antenna; /* antenna */
};
#define ATH_RHIST_SIZE 16 /* number of samples */
#define ATH_RHIST_NOTIME (~0)
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
/* driver-specific node */
struct ath_node {
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
struct ieee80211_node an_node; /* base class */
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
u_int an_tx_ok; /* tx ok pkt */
u_int an_tx_err; /* tx !ok pkt */
u_int an_tx_retr; /* tx retry count */
int an_tx_upper; /* tx upper rate req cnt */
u_int an_tx_antenna; /* antenna for last good frame */
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
u_int an_rx_antenna; /* antenna for last rcvd frame */
Maintain a history of data associated with received frames and use this to calculate smoothed signal quality data for each node. o add a 16-deep history buffer to each driver-private node storage that holds rssi and antenna info for received frames o override the default per-node "get rssi" method to return an average rssi value based on samples collected over the last second o enable beacon reception so even idle systems maintain a running history of signal quality This data may also be useful for improving the rate control algorithm. Based on work by Tom Marshall <tommy@home.tig-grr.com> for MADWIFI.
2003-09-15 22:34:46 +00:00
struct ath_recv_hist an_rx_hist[ATH_RHIST_SIZE];
u_int an_rx_hist_next;/* index of next ``free entry'' */
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
};
MFp4 changes to fix locking issues and correct reference count handling of station entries in hostap mode: Input path: o driver is now expected to find the node associated with the sender of a received frame; use ic_bss if none is located o driver passes the (referenced) node into ieee80211_input for use within the wlan module and is responsible for cleaning up on return o the antenna state is no longer passed up with each frame; this is now considered driver-private state and drivers are responsible for keeping it in the driver-private part of a node Output path: Revamp output path for management frames to eliminate redundant locking that causes problems and to correct reference counting bogosity that occurs when stations are timed out due to inactivity (in AP mode). On output the refcnt'd node is stashed in the pkthdr's recvif field (yech) and retrieved by the driver. This eliminates an unref/ref scenario and related node table unlock/lock due to the driver looking up the node. This is particularly important when stations are timed out as this causes a lock order reversal that can result in a deadlock. As a byproduct we also reduce the overhead for sending management frames (minimal). Additional fallout from this is a change to ieee80211_encap to return a refcn't node for tieing to the outbound frame. Node refcnts are not reclaimed until after a frame is completely processed (e.g. in the tx interrupt handler). This is especially important for timed out stations as this deref will be the final one causing the node entry to be reclaimed. Additional semi-related changes: o replace m_copym use with m_copypacket (optimization) o add assert to verify ic_bss is never free'd during normal operation o add comments explaining calling conventions by drivers for frames going in each direction o remove extraneous code that "cannot be executed" (e.g. because pointers may never be null)
2003-08-19 22:17:04 +00:00
#define ATH_NODE(_n) ((struct ath_node *)(_n))
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
struct ath_buf {
TAILQ_ENTRY(ath_buf) bf_list;
int bf_nseg;
bus_dmamap_t bf_dmamap; /* DMA map of the buffer */
struct ath_desc *bf_desc; /* virtual addr of desc */
bus_addr_t bf_daddr; /* physical addr of desc */
struct mbuf *bf_m; /* mbuf for buf */
struct ieee80211_node *bf_node; /* pointer to the node */
bus_size_t bf_mapsize;
#define ATH_MAX_SCATTER 64
bus_dma_segment_t bf_segs[ATH_MAX_SCATTER];
};
struct ath_softc {
struct ieee80211com sc_ic; /* IEEE 802.11 common */
track changes to 802.11 code: o override new_state method per new model o use ieee80211_state_name instead of private copy
2003-07-20 21:38:20 +00:00
int (*sc_newstate)(struct ieee80211com *,
enum ieee80211_state, int);
do proper subclassing of node free+copy; the previous hack falls apart when the 802.11 layer does useful work Obtained from: madwifi
2004-04-03 03:33:02 +00:00
void (*sc_node_free)(struct ieee80211com *,
struct ieee80211_node *);
void (*sc_node_copy)(struct ieee80211com *,
struct ieee80211_node *,
const struct ieee80211_node *);
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
device_t sc_dev;
bus_space_tag_t sc_st; /* bus space tag */
bus_space_handle_t sc_sh; /* bus space handle */
bus_dma_tag_t sc_dmat; /* bus DMA tag */
struct mtx sc_mtx; /* master lock (recursive) */
struct ath_hal *sc_ah; /* Atheros HAL */
unsigned int sc_invalid : 1,/* disable hardware accesses */
sc_doani : 1,/* dynamic noise immunity */
sc_probing : 1;/* probing AP on beacon miss */
/* rate tables */
const HAL_RATE_TABLE *sc_rates[IEEE80211_MODE_MAX];
const HAL_RATE_TABLE *sc_currates; /* current rate table */
enum ieee80211_phymode sc_curmode; /* current phy mode */
u_int8_t sc_rixmap[256]; /* IEEE to h/w rate table ix */
maintain a table for mapping hardware rate codes to 802.11 rates for calculating the rate for each rx'd frame
2003-08-19 21:24:16 +00:00
u_int8_t sc_hwmap[32]; /* h/w rate ix to IEEE table */
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
HAL_INT sc_imask; /* interrupt mask copy */
Add support for the experimental radiotap capture format. With this we no longer need the debugging code to dump packets.
2003-09-05 22:22:49 +00:00
struct bpf_if *sc_drvbpf;
union {
struct ath_tx_radiotap_header th;
u_int8_t pad[64];
} u_tx_rt;
radiotap updates: o force little-endian byte order for header o pad header to 32-bit boundary to guard against applications that assume packet data alignment
2004-04-01 00:38:45 +00:00
int sc_tx_th_len;
Add support for the experimental radiotap capture format. With this we no longer need the debugging code to dump packets.
2003-09-05 22:22:49 +00:00
union {
struct ath_rx_radiotap_header th;
u_int8_t pad[64];
} u_rx_rt;
radiotap updates: o force little-endian byte order for header o pad header to 32-bit boundary to guard against applications that assume packet data alignment
2004-04-01 00:38:45 +00:00
int sc_rx_th_len;
Add support for the experimental radiotap capture format. With this we no longer need the debugging code to dump packets.
2003-09-05 22:22:49 +00:00
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
struct ath_desc *sc_desc; /* TX/RX descriptors */
bus_dma_segment_t sc_dseg;
bus_dmamap_t sc_ddmamap; /* DMA map for descriptors */
bus_addr_t sc_desc_paddr; /* physical addr of sc_desc */
bus_addr_t sc_desc_len; /* size of sc_desc */
struct task sc_fataltask; /* fatal int processing */
struct task sc_rxorntask; /* rxorn int processing */
TAILQ_HEAD(, ath_buf) sc_rxbuf; /* receive buffer */
u_int32_t *sc_rxlink; /* link ptr in last RX desc */
struct task sc_rxtask; /* rx int processing */
u_int sc_txhalq; /* HAL q for outgoing frames */
u_int32_t *sc_txlink; /* link ptr in last TX desc */
int sc_tx_timer; /* transmit timeout */
TAILQ_HEAD(, ath_buf) sc_txbuf; /* transmit buffer */
struct mtx sc_txbuflock; /* txbuf lock */
TAILQ_HEAD(, ath_buf) sc_txq; /* transmitting queue */
struct mtx sc_txqlock; /* lock on txq and txlink */
struct task sc_txtask; /* tx int processing */
u_int sc_bhalq; /* HAL q for outgoing beacons */
struct ath_buf *sc_bcbuf; /* beacon buffer */
struct ath_buf *sc_bufptr; /* allocated buffer ptr */
struct task sc_bmisstask; /* bmiss int processing */
struct callout sc_cal_ch; /* callout handle for cals */
struct callout sc_scan_ch; /* callout handle for scan */
struct ath_stats sc_stats; /* interface statistics */
};
Add support for the experimental radiotap capture format. With this we no longer need the debugging code to dump packets.
2003-09-05 22:22:49 +00:00
#define sc_tx_th u_tx_rt.th
#define sc_rx_th u_rx_rt.th
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
o convert mutex calls to #defines for portability, etc. o destroy mutex's on detach (was missing)
2003-10-14 22:51:45 +00:00
#define ATH_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
MTX_NETWORK_LOCK, MTX_DEF | MTX_RECURSE)
#define ATH_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)
#define ATH_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define ATH_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define ATH_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_mtx, MA_OWNED)
#define ATH_TXBUF_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_txbuflock, \
device_get_nameunit((_sc)->sc_dev), "xmit buf q", MTX_DEF)
#define ATH_TXBUF_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_txbuflock)
#define ATH_TXBUF_LOCK(_sc) mtx_lock(&(_sc)->sc_txbuflock)
#define ATH_TXBUF_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_txbuflock)
#define ATH_TXBUF_LOCK_ASSERT(_sc) \
mtx_assert(&(_sc)->sc_txbuflock, MA_OWNED)
#define ATH_TXQ_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_txqlock, \
device_get_nameunit((_sc)->sc_dev), "xmit q", MTX_DEF)
#define ATH_TXQ_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_txqlock)
#define ATH_TXQ_LOCK(_sc) mtx_lock(&(_sc)->sc_txqlock)
#define ATH_TXQ_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_txqlock)
#define ATH_TXQ_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->sc_txqlock, MA_OWNED)
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
int ath_attach(u_int16_t, struct ath_softc *);
int ath_detach(struct ath_softc *);
void ath_resume(struct ath_softc *);
void ath_suspend(struct ath_softc *);
void ath_shutdown(struct ath_softc *);
void ath_intr(void *);
/*
* HAL definitions to comply with local coding convention.
*/
#define ath_hal_reset(_ah, _opmode, _chan, _outdoor, _pstatus) \
((*(_ah)->ah_reset)((_ah), (_opmode), (_chan), (_outdoor), (_pstatus)))
#define ath_hal_getratetable(_ah, _mode) \
((*(_ah)->ah_getRateTable)((_ah), (_mode)))
o add read-only sysctls to view regulatory domain, country code, and outdoor use controls o use sysctl-visible values in setting up channel list
2003-07-13 17:07:25 +00:00
#define ath_hal_getregdomain(_ah) \
((*(_ah)->ah_getRegDomain)((_ah)))
#define ath_hal_getcountrycode(_ah) (_ah)->ah_countryCode
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
#define ath_hal_getmac(_ah, _mac) \
((*(_ah)->ah_getMacAddress)((_ah), (_mac)))
#define ath_hal_detach(_ah) \
((*(_ah)->ah_detach)((_ah)))
#define ath_hal_intrset(_ah, _mask) \
((*(_ah)->ah_setInterrupts)((_ah), (_mask)))
#define ath_hal_intrget(_ah) \
((*(_ah)->ah_getInterrupts)((_ah)))
#define ath_hal_intrpend(_ah) \
((*(_ah)->ah_isInterruptPending)((_ah)))
#define ath_hal_getisr(_ah, _pmask) \
((*(_ah)->ah_getPendingInterrupts)((_ah), (_pmask)))
#define ath_hal_updatetxtriglevel(_ah, _inc) \
((*(_ah)->ah_updateTxTrigLevel)((_ah), (_inc)))
#define ath_hal_setpower(_ah, _mode, _sleepduration) \
((*(_ah)->ah_setPowerMode)((_ah), (_mode), AH_TRUE, (_sleepduration)))
#define ath_hal_keyreset(_ah, _ix) \
((*(_ah)->ah_resetKeyCacheEntry)((_ah), (_ix)))
#define ath_hal_keyset(_ah, _ix, _pk) \
((*(_ah)->ah_setKeyCacheEntry)((_ah), (_ix), (_pk), NULL, AH_FALSE))
#define ath_hal_keyisvalid(_ah, _ix) \
(((*(_ah)->ah_isKeyCacheEntryValid)((_ah), (_ix))))
#define ath_hal_keysetmac(_ah, _ix, _mac) \
((*(_ah)->ah_setKeyCacheEntryMac)((_ah), (_ix), (_mac)))
#define ath_hal_getrxfilter(_ah) \
((*(_ah)->ah_getRxFilter)((_ah)))
#define ath_hal_setrxfilter(_ah, _filter) \
((*(_ah)->ah_setRxFilter)((_ah), (_filter)))
#define ath_hal_setmcastfilter(_ah, _mfilt0, _mfilt1) \
((*(_ah)->ah_setMulticastFilter)((_ah), (_mfilt0), (_mfilt1)))
#define ath_hal_waitforbeacon(_ah, _bf) \
((*(_ah)->ah_waitForBeaconDone)((_ah), (_bf)->bf_daddr))
#define ath_hal_putrxbuf(_ah, _bufaddr) \
((*(_ah)->ah_setRxDP)((_ah), (_bufaddr)))
#define ath_hal_gettsf32(_ah) \
((*(_ah)->ah_getTsf32)((_ah)))
#define ath_hal_gettsf64(_ah) \
((*(_ah)->ah_getTsf64)((_ah)))
#define ath_hal_resettsf(_ah) \
((*(_ah)->ah_resetTsf)((_ah)))
#define ath_hal_rxena(_ah) \
((*(_ah)->ah_enableReceive)((_ah)))
#define ath_hal_puttxbuf(_ah, _q, _bufaddr) \
((*(_ah)->ah_setTxDP)((_ah), (_q), (_bufaddr)))
#define ath_hal_gettxbuf(_ah, _q) \
((*(_ah)->ah_getTxDP)((_ah), (_q)))
#define ath_hal_getrxbuf(_ah) \
((*(_ah)->ah_getRxDP)((_ah)))
#define ath_hal_txstart(_ah, _q) \
((*(_ah)->ah_startTxDma)((_ah), (_q)))
#define ath_hal_setchannel(_ah, _chan) \
((*(_ah)->ah_setChannel)((_ah), (_chan)))
#define ath_hal_calibrate(_ah, _chan) \
((*(_ah)->ah_perCalibration)((_ah), (_chan)))
#define ath_hal_setledstate(_ah, _state) \
((*(_ah)->ah_setLedState)((_ah), (_state)))
#define ath_hal_beaconinit(_ah, _opmode, _nextb, _bperiod) \
((*(_ah)->ah_beaconInit)((_ah), (_opmode), (_nextb), (_bperiod)))
#define ath_hal_beaconreset(_ah) \
((*(_ah)->ah_resetStationBeaconTimers)((_ah)))
#define ath_hal_beacontimers(_ah, _bs, _tsf, _dc, _cc) \
((*(_ah)->ah_setStationBeaconTimers)((_ah), (_bs), (_tsf), \
(_dc), (_cc)))
#define ath_hal_setassocid(_ah, _bss, _associd) \
((*(_ah)->ah_writeAssocid)((_ah), (_bss), (_associd), 0))
#define ath_hal_setopmode(_ah, _opmode) \
((*(_ah)->ah_setPCUConfig)((_ah), (_opmode)))
#define ath_hal_stoptxdma(_ah, _qnum) \
((*(_ah)->ah_stopTxDma)((_ah), (_qnum)))
#define ath_hal_stoppcurecv(_ah) \
((*(_ah)->ah_stopPcuReceive)((_ah)))
#define ath_hal_startpcurecv(_ah) \
((*(_ah)->ah_startPcuReceive)((_ah)))
#define ath_hal_stopdmarecv(_ah) \
((*(_ah)->ah_stopDmaReceive)((_ah)))
#define ath_hal_dumpstate(_ah) \
((*(_ah)->ah_dumpState)((_ah)))
o track API change for HAL v0.9.6.1 o fix race condition when processing rx descriptors: because we use a self-linked descriptor at the end of the rx descriptor list to avoid rx overruns (which can easily happen for 5212 parts that enable PHY errors) we must carefully check that a descriptor is "done" by looking ahead to the next descriptor before believing the done bit in the current descriptor (this is all handled in the HAL since the rx descriptor format is chip-specific so we need to pass in two additional parameters--the physical address of the current descriptor and the virtual address of the next descriptor in the list) o check copyout return status for SIOCGATHSTATS ioctl Approved by: re (scottl)
2003-11-29 01:23:59 +00:00
#define ath_hal_getdiagstate(_ah, _id, _data, _size) \
((*(_ah)->ah_getDiagState)((_ah), (_id), (_data), (_size)))
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
#define ath_hal_setuptxqueue(_ah, _type, _irq) \
((*(_ah)->ah_setupTxQueue)((_ah), (_type), (_irq)))
#define ath_hal_resettxqueue(_ah, _q) \
((*(_ah)->ah_resetTxQueue)((_ah), (_q)))
#define ath_hal_releasetxqueue(_ah, _q) \
((*(_ah)->ah_releaseTxQueue)((_ah), (_q)))
#define ath_hal_hasveol(_ah) \
((*(_ah)->ah_hasVEOL)((_ah)))
#define ath_hal_getrfgain(_ah) \
((*(_ah)->ah_getRfGain)((_ah)))
#define ath_hal_rxmonitor(_ah) \
((*(_ah)->ah_rxMonitor)((_ah)))
#define ath_hal_setupbeacondesc(_ah, _ds, _opmode, _flen, _hlen, \
_rate, _antmode) \
((*(_ah)->ah_setupBeaconDesc)((_ah), (_ds), (_opmode), \
(_flen), (_hlen), (_rate), (_antmode)))
#define ath_hal_setuprxdesc(_ah, _ds, _size, _intreq) \
((*(_ah)->ah_setupRxDesc)((_ah), (_ds), (_size), (_intreq)))
o track API change for HAL v0.9.6.1 o fix race condition when processing rx descriptors: because we use a self-linked descriptor at the end of the rx descriptor list to avoid rx overruns (which can easily happen for 5212 parts that enable PHY errors) we must carefully check that a descriptor is "done" by looking ahead to the next descriptor before believing the done bit in the current descriptor (this is all handled in the HAL since the rx descriptor format is chip-specific so we need to pass in two additional parameters--the physical address of the current descriptor and the virtual address of the next descriptor in the list) o check copyout return status for SIOCGATHSTATS ioctl Approved by: re (scottl)
2003-11-29 01:23:59 +00:00
#define ath_hal_rxprocdesc(_ah, _ds, _dspa, _dsnext) \
((*(_ah)->ah_procRxDesc)((_ah), (_ds), (_dspa), (_dsnext)))
Atheros 802.11 driver. Requires Atheros Hardware Access Lay (HAL). Supported by: Atheros Comunications
2003-06-23 17:01:19 +00:00
#define ath_hal_setuptxdesc(_ah, _ds, _plen, _hlen, _atype, _txpow, \
_txr0, _txtr0, _keyix, _ant, _flags, \
_rtsrate, _rtsdura) \
((*(_ah)->ah_setupTxDesc)((_ah), (_ds), (_plen), (_hlen), (_atype), \
(_txpow), (_txr0), (_txtr0), (_keyix), (_ant), \
(_flags), (_rtsrate), (_rtsdura)))
#define ath_hal_setupxtxdesc(_ah, _ds, _short, \
_txr1, _txtr1, _txr2, _txtr2, _txr3, _txtr3) \
((*(_ah)->ah_setupXTxDesc)((_ah), (_ds), (_short), \
(_txr1), (_txtr1), (_txr2), (_txtr2), (_txr3), (_txtr3)))
#define ath_hal_filltxdesc(_ah, _ds, _l, _first, _last) \
((*(_ah)->ah_fillTxDesc)((_ah), (_ds), (_l), (_first), (_last)))
#define ath_hal_txprocdesc(_ah, _ds) \
((*(_ah)->ah_procTxDesc)((_ah), (_ds)))
#endif /* _DEV_ATH_ATHVAR_H */
Reference in New Issue Copy Permalink