2005-01-06 01:43:34 +00:00
|
|
|
/*-
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
* Copyright (c) 1997, 1998, 1999
|
|
|
|
|
* Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved.
|
|
|
|
|
*
|
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
|
* are met:
|
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
|
|
|
* must display the following acknowledgement:
|
|
|
|
|
* This product includes software developed by Bill Paul.
|
|
|
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
|
|
|
* may be used to endorse or promote products derived from this software
|
|
|
|
|
* without specific prior written permission.
|
|
|
|
|
*
|
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
|
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
|
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
|
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
|
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
|
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
|
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
|
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
2003-01-15 20:11:31 +00:00
|
|
|
* Lucent WaveLAN/IEEE 802.11 PCMCIA driver.
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
*
|
2003-01-15 20:11:31 +00:00
|
|
|
* Original FreeBSD driver written by Bill Paul <wpaul@ctr.columbia.edu>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
* Electrical Engineering Department
|
|
|
|
|
* Columbia University, New York City
|
|
|
|
|
*/
|
|
|
|
|
|
|
|
|
|
/*
|
1999-05-22 16:12:54 +00:00
|
|
|
* The WaveLAN/IEEE adapter is the second generation of the WaveLAN
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
* from Lucent. Unlike the older cards, the new ones are programmed
|
|
|
|
|
* entirely via a firmware-driven controller called the Hermes.
|
|
|
|
|
* Unfortunately, Lucent will not release the Hermes programming manual
|
|
|
|
|
* without an NDA (if at all). What they do release is an API library
|
|
|
|
|
* called the HCF (Hardware Control Functions) which is supposed to
|
|
|
|
|
* do the device-specific operations of a device driver for you. The
|
|
|
|
|
* publically available version of the HCF library (the 'HCF Light') is
|
1999-05-22 16:12:54 +00:00
|
|
|
* a) extremely gross, b) lacks certain features, particularly support
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
* for 802.11 frames, and c) is contaminated by the GNU Public License.
|
|
|
|
|
*
|
|
|
|
|
* This driver does not use the HCF or HCF Light at all. Instead, it
|
|
|
|
|
* programs the Hermes controller directly, using information gleaned
|
|
|
|
|
* from the HCF Light code and corresponding documentation.
|
|
|
|
|
*
|
2002-04-26 23:11:23 +00:00
|
|
|
* This driver supports the ISA, PCMCIA and PCI versions of the Lucent
|
|
|
|
|
* WaveLan cards (based on the Hermes chipset), as well as the newer
|
|
|
|
|
* Prism 2 chipsets with firmware from Intersil and Symbol.
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
*/
|
|
|
|
|
|
2003-04-03 21:36:33 +00:00
|
|
|
#include <sys/cdefs.h>
|
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
#define WI_HERMES_STATS_WAR /* Work around stats counter bug. */
|
|
|
|
|
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
|
#include <sys/systm.h>
|
2002-04-26 22:48:23 +00:00
|
|
|
#include <sys/endian.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
#include <sys/sockio.h>
|
|
|
|
|
#include <sys/mbuf.h>
|
2006-11-06 13:42:10 +00:00
|
|
|
#include <sys/priv.h>
|
2001-09-12 08:38:13 +00:00
|
|
|
#include <sys/proc.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
#include <sys/kernel.h>
|
|
|
|
|
#include <sys/socket.h>
|
1999-11-25 20:45:49 +00:00
|
|
|
#include <sys/module.h>
|
|
|
|
|
#include <sys/bus.h>
|
2002-04-12 06:01:28 +00:00
|
|
|
#include <sys/random.h>
|
1999-11-25 20:45:49 +00:00
|
|
|
#include <sys/syslog.h>
|
|
|
|
|
#include <sys/sysctl.h>
|
|
|
|
|
|
|
|
|
|
#include <machine/bus.h>
|
|
|
|
|
#include <machine/resource.h>
|
2003-06-28 06:17:26 +00:00
|
|
|
#include <machine/atomic.h>
|
1999-11-25 20:45:49 +00:00
|
|
|
#include <sys/rman.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
|
|
|
|
#include <net/if.h>
|
|
|
|
|
#include <net/if_arp.h>
|
|
|
|
|
#include <net/ethernet.h>
|
|
|
|
|
#include <net/if_dl.h>
|
2009-03-30 21:53:27 +00:00
|
|
|
#include <net/if_llc.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
#include <net/if_media.h>
|
|
|
|
|
#include <net/if_types.h>
|
2003-06-28 06:17:26 +00:00
|
|
|
|
|
|
|
|
#include <net80211/ieee80211_var.h>
|
|
|
|
|
#include <net80211/ieee80211_ioctl.h>
|
2003-09-05 22:29:30 +00:00
|
|
|
#include <net80211/ieee80211_radiotap.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
|
|
|
|
#include <netinet/in.h>
|
|
|
|
|
#include <netinet/in_systm.h>
|
|
|
|
|
#include <netinet/in_var.h>
|
|
|
|
|
#include <netinet/ip.h>
|
|
|
|
|
#include <netinet/if_ether.h>
|
|
|
|
|
|
|
|
|
|
#include <net/bpf.h>
|
|
|
|
|
|
2001-01-09 00:44:33 +00:00
|
|
|
#include <dev/wi/if_wavelan_ieee.h>
|
|
|
|
|
#include <dev/wi/if_wireg.h>
|
2003-09-05 22:29:30 +00:00
|
|
|
#include <dev/wi/if_wivar.h>
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static struct ieee80211vap *wi_vap_create(struct ieee80211com *ic,
|
|
|
|
|
const char name[IFNAMSIZ], int unit, int opmode, int flags,
|
|
|
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
|
|
|
const uint8_t mac[IEEE80211_ADDR_LEN]);
|
|
|
|
|
static void wi_vap_delete(struct ieee80211vap *vap);
|
|
|
|
|
static void wi_stop_locked(struct wi_softc *sc, int disable);
|
2006-12-11 00:35:51 +00:00
|
|
|
static void wi_start_locked(struct ifnet *);
|
2002-03-05 16:12:41 +00:00
|
|
|
static void wi_start(struct ifnet *);
|
2006-08-05 04:58:25 +00:00
|
|
|
static int wi_start_tx(struct ifnet *ifp, struct wi_frame *frmhdr,
|
|
|
|
|
struct mbuf *m0);
|
|
|
|
|
static int wi_raw_xmit(struct ieee80211_node *, struct mbuf *,
|
|
|
|
|
const struct ieee80211_bpf_params *);
|
2008-04-20 20:35:46 +00:00
|
|
|
static int wi_newstate_sta(struct ieee80211vap *, enum ieee80211_state, int);
|
2009-05-20 20:00:40 +00:00
|
|
|
static int wi_newstate_hostap(struct ieee80211vap *, enum ieee80211_state,
|
|
|
|
|
int);
|
2008-04-20 20:35:46 +00:00
|
|
|
static void wi_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m,
|
2009-05-20 20:00:40 +00:00
|
|
|
int subtype, int rssi, int nf);
|
2008-04-20 20:35:46 +00:00
|
|
|
static int wi_reset(struct wi_softc *);
|
2006-12-11 00:41:22 +00:00
|
|
|
static void wi_watchdog(void *);
|
2003-01-15 20:11:31 +00:00
|
|
|
static int wi_ioctl(struct ifnet *, u_long, caddr_t);
|
2002-03-05 16:12:41 +00:00
|
|
|
static void wi_media_status(struct ifnet *, struct ifmediareq *);
|
2001-05-26 09:27:08 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static void wi_rx_intr(struct wi_softc *);
|
|
|
|
|
static void wi_tx_intr(struct wi_softc *);
|
|
|
|
|
static void wi_tx_ex_intr(struct wi_softc *);
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void wi_info_intr(struct wi_softc *);
|
2005-10-02 04:29:08 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static int wi_write_txrate(struct wi_softc *, struct ieee80211vap *);
|
|
|
|
|
static int wi_write_wep(struct wi_softc *, struct ieee80211vap *);
|
2003-01-15 20:11:31 +00:00
|
|
|
static int wi_write_multi(struct wi_softc *);
|
2008-04-20 20:35:46 +00:00
|
|
|
static void wi_update_mcast(struct ifnet *);
|
2009-05-20 20:00:40 +00:00
|
|
|
static void wi_update_promisc(struct ifnet *);
|
2003-01-15 20:11:31 +00:00
|
|
|
static int wi_alloc_fid(struct wi_softc *, int, int *);
|
|
|
|
|
static void wi_read_nicid(struct wi_softc *);
|
|
|
|
|
static int wi_write_ssid(struct wi_softc *, int, u_int8_t *, int);
|
|
|
|
|
|
2009-05-20 22:28:55 +00:00
|
|
|
static int wi_cmd(struct wi_softc *, int, int, int, int);
|
2003-01-15 20:11:31 +00:00
|
|
|
static int wi_seek_bap(struct wi_softc *, int, int);
|
|
|
|
|
static int wi_read_bap(struct wi_softc *, int, int, void *, int);
|
|
|
|
|
static int wi_write_bap(struct wi_softc *, int, int, void *, int);
|
|
|
|
|
static int wi_mwrite_bap(struct wi_softc *, int, int, struct mbuf *, int);
|
|
|
|
|
static int wi_read_rid(struct wi_softc *, int, void *, int *);
|
|
|
|
|
static int wi_write_rid(struct wi_softc *, int, void *, int);
|
2008-04-20 20:35:46 +00:00
|
|
|
static int wi_write_appie(struct wi_softc *, int, const struct ieee80211_appie *);
|
2002-08-15 07:13:17 +00:00
|
|
|
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
static void wi_scan_start(struct ieee80211com *);
|
|
|
|
|
static void wi_scan_end(struct ieee80211com *);
|
|
|
|
|
static void wi_set_channel(struct ieee80211com *);
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static __inline int
|
|
|
|
|
wi_write_val(struct wi_softc *sc, int rid, u_int16_t val)
|
|
|
|
|
{
|
|
|
|
|
|
|
|
|
|
val = htole16(val);
|
|
|
|
|
return wi_write_rid(sc, rid, &val, sizeof(val));
|
|
|
|
|
}
|
|
|
|
|
|
2003-01-20 20:55:37 +00:00
|
|
|
SYSCTL_NODE(_hw, OID_AUTO, wi, CTLFLAG_RD, 0, "Wireless driver parameters");
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static struct timeval lasttxerror; /* time of last tx error msg */
|
|
|
|
|
static int curtxeps; /* current tx error msgs/sec */
|
2003-02-26 17:18:35 +00:00
|
|
|
static int wi_txerate = 0; /* tx error rate: max msgs/sec */
|
2003-01-20 20:55:37 +00:00
|
|
|
SYSCTL_INT(_hw_wi, OID_AUTO, txerate, CTLFLAG_RW, &wi_txerate,
|
2003-02-26 17:18:35 +00:00
|
|
|
0, "max tx error msgs/sec; 0 to disable msgs");
|
2003-01-15 20:11:31 +00:00
|
|
|
|
|
|
|
|
#define WI_DEBUG
|
|
|
|
|
#ifdef WI_DEBUG
|
|
|
|
|
static int wi_debug = 0;
|
2003-01-20 20:55:37 +00:00
|
|
|
SYSCTL_INT(_hw_wi, OID_AUTO, debug, CTLFLAG_RW, &wi_debug,
|
|
|
|
|
0, "control debugging printfs");
|
2003-01-15 20:11:31 +00:00
|
|
|
#define DPRINTF(X) if (wi_debug) printf X
|
|
|
|
|
#else
|
|
|
|
|
#define DPRINTF(X)
|
|
|
|
|
#endif
|
|
|
|
|
|
|
|
|
|
#define WI_INTRS (WI_EV_RX | WI_EV_ALLOC | WI_EV_INFO)
|
2001-03-28 05:05:05 +00:00
|
|
|
|
2002-04-04 21:40:37 +00:00
|
|
|
struct wi_card_ident wi_card_ident[] = {
|
|
|
|
|
/* CARD_ID CARD_NAME FIRM_TYPE */
|
|
|
|
|
{ WI_NIC_LUCENT_ID, WI_NIC_LUCENT_STR, WI_LUCENT },
|
|
|
|
|
{ WI_NIC_SONY_ID, WI_NIC_SONY_STR, WI_LUCENT },
|
|
|
|
|
{ WI_NIC_LUCENT_EMB_ID, WI_NIC_LUCENT_EMB_STR, WI_LUCENT },
|
|
|
|
|
{ WI_NIC_EVB2_ID, WI_NIC_EVB2_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_HWB3763_ID, WI_NIC_HWB3763_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_HWB3163_ID, WI_NIC_HWB3163_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_HWB3163B_ID, WI_NIC_HWB3163B_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_EVB3_ID, WI_NIC_EVB3_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_HWB1153_ID, WI_NIC_HWB1153_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_P2_SST_ID, WI_NIC_P2_SST_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_EVB2_SST_ID, WI_NIC_EVB2_SST_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_EVA_ID, WI_NIC_3842_EVA_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_PCMCIA_AMD_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_PCMCIA_SST_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
2002-08-05 07:24:02 +00:00
|
|
|
{ WI_NIC_3842_PCMCIA_ATL_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_PCMCIA_ATS_ID, WI_NIC_3842_PCMCIA_STR, WI_INTERSIL },
|
2002-04-04 21:40:37 +00:00
|
|
|
{ WI_NIC_3842_MINI_AMD_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_MINI_SST_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
2002-08-05 07:24:02 +00:00
|
|
|
{ WI_NIC_3842_MINI_ATL_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_MINI_ATS_ID, WI_NIC_3842_MINI_STR, WI_INTERSIL },
|
2002-04-04 21:40:37 +00:00
|
|
|
{ WI_NIC_3842_PCI_AMD_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_PCI_SST_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
2002-08-05 07:24:02 +00:00
|
|
|
{ WI_NIC_3842_PCI_ATS_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_3842_PCI_ATL_ID, WI_NIC_3842_PCI_STR, WI_INTERSIL },
|
2002-04-04 21:40:37 +00:00
|
|
|
{ WI_NIC_P3_PCMCIA_AMD_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_P3_PCMCIA_SST_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
2002-08-05 07:24:02 +00:00
|
|
|
{ WI_NIC_P3_PCMCIA_ATL_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_P3_PCMCIA_ATS_ID, WI_NIC_P3_PCMCIA_STR, WI_INTERSIL },
|
2002-04-04 21:40:37 +00:00
|
|
|
{ WI_NIC_P3_MINI_AMD_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_P3_MINI_SST_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
2002-08-05 07:24:02 +00:00
|
|
|
{ WI_NIC_P3_MINI_ATL_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
|
|
|
|
{ WI_NIC_P3_MINI_ATS_ID, WI_NIC_P3_MINI_STR, WI_INTERSIL },
|
2002-04-04 21:40:37 +00:00
|
|
|
{ 0, NULL, 0 },
|
|
|
|
|
};
|
|
|
|
|
|
2008-07-28 17:00:37 +00:00
|
|
|
static char *wi_firmware_names[] = { "none", "Hermes", "Intersil", "Symbol" };
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
devclass_t wi_devclass;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2002-04-02 02:38:35 +00:00
|
|
|
int
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_attach(device_t dev)
|
2001-03-28 05:05:05 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_softc *sc = device_get_softc(dev);
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic;
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp;
|
2003-06-28 06:17:26 +00:00
|
|
|
int i, nrates, buflen;
|
2003-01-15 20:11:31 +00:00
|
|
|
u_int16_t val;
|
|
|
|
|
u_int8_t ratebuf[2 + IEEE80211_RATE_SIZE];
|
2003-06-28 06:17:26 +00:00
|
|
|
struct ieee80211_rateset *rs;
|
2008-07-28 17:00:37 +00:00
|
|
|
struct sysctl_ctx_list *sctx;
|
|
|
|
|
struct sysctl_oid *soid;
|
2003-01-15 20:11:31 +00:00
|
|
|
static const u_int8_t empty_macaddr[IEEE80211_ADDR_LEN] = {
|
|
|
|
|
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
|
|
|
|
};
|
|
|
|
|
int error;
|
2009-03-29 17:59:14 +00:00
|
|
|
uint8_t macaddr[IEEE80211_ADDR_LEN];
|
1999-11-25 20:45:49 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
ifp = sc->sc_ifp = if_alloc(IFT_IEEE80211);
|
2005-06-10 16:49:24 +00:00
|
|
|
if (ifp == NULL) {
|
|
|
|
|
device_printf(dev, "can not if_alloc\n");
|
|
|
|
|
wi_free(dev);
|
2008-04-20 20:35:46 +00:00
|
|
|
return ENOSPC;
|
2005-06-10 16:49:24 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
ic = ifp->if_l2com;
|
2005-06-10 16:49:24 +00:00
|
|
|
|
2004-12-08 17:36:28 +00:00
|
|
|
sc->sc_firmware_type = WI_NOTYPE;
|
2003-12-09 07:41:07 +00:00
|
|
|
sc->wi_cmd_count = 500;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
/* Reset the NIC. */
|
2008-04-20 20:35:46 +00:00
|
|
|
if (wi_reset(sc) != 0) {
|
|
|
|
|
wi_free(dev);
|
2003-01-15 20:11:31 +00:00
|
|
|
return ENXIO; /* XXX */
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
/* Read NIC identification */
|
|
|
|
|
wi_read_nicid(sc);
|
|
|
|
|
switch (sc->sc_firmware_type) {
|
|
|
|
|
case WI_LUCENT:
|
|
|
|
|
if (sc->sc_sta_firmware_ver < 60006)
|
|
|
|
|
goto reject;
|
|
|
|
|
break;
|
|
|
|
|
case WI_INTERSIL:
|
|
|
|
|
if (sc->sc_sta_firmware_ver < 800)
|
|
|
|
|
goto reject;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
reject:
|
|
|
|
|
device_printf(dev, "Sorry, this card is not supported "
|
|
|
|
|
"(type %d, firmware ver %d)\n",
|
|
|
|
|
sc->sc_firmware_type, sc->sc_sta_firmware_ver);
|
|
|
|
|
wi_free(dev);
|
|
|
|
|
return EOPNOTSUPP;
|
|
|
|
|
}
|
|
|
|
|
|
2008-07-28 17:00:37 +00:00
|
|
|
/* Export info about the device via sysctl */
|
|
|
|
|
sctx = device_get_sysctl_ctx(dev);
|
|
|
|
|
soid = device_get_sysctl_tree(dev);
|
|
|
|
|
SYSCTL_ADD_STRING(sctx, SYSCTL_CHILDREN(soid), OID_AUTO,
|
|
|
|
|
"firmware_type", CTLFLAG_RD,
|
|
|
|
|
wi_firmware_names[sc->sc_firmware_type], 0,
|
|
|
|
|
"Firmware type string");
|
|
|
|
|
SYSCTL_ADD_INT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "sta_version",
|
|
|
|
|
CTLFLAG_RD, &sc->sc_sta_firmware_ver, 0,
|
|
|
|
|
"Station Firmware version");
|
|
|
|
|
if (sc->sc_firmware_type == WI_INTERSIL)
|
|
|
|
|
SYSCTL_ADD_INT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO,
|
|
|
|
|
"pri_version", CTLFLAG_RD, &sc->sc_pri_firmware_ver, 0,
|
|
|
|
|
"Primary Firmware version");
|
2011-01-19 17:04:07 +00:00
|
|
|
SYSCTL_ADD_UINT(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "nic_id",
|
2008-07-28 17:00:37 +00:00
|
|
|
CTLFLAG_RD, &sc->sc_nic_id, 0, "NIC id");
|
|
|
|
|
SYSCTL_ADD_STRING(sctx, SYSCTL_CHILDREN(soid), OID_AUTO, "nic_name",
|
|
|
|
|
CTLFLAG_RD, sc->sc_nic_name, 0, "NIC name");
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
mtx_init(&sc->sc_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
|
|
|
|
|
MTX_DEF | MTX_RECURSE);
|
|
|
|
|
callout_init_mtx(&sc->sc_watchdog, &sc->sc_mtx, 0);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2001-05-10 17:17:24 +00:00
|
|
|
/*
|
|
|
|
|
* Read the station address.
|
|
|
|
|
* And do it twice. I've seen PRISM-based cards that return
|
|
|
|
|
* an error when trying to read it the first time, which causes
|
|
|
|
|
* the probe to fail.
|
|
|
|
|
*/
|
2003-01-15 20:11:31 +00:00
|
|
|
buflen = IEEE80211_ADDR_LEN;
|
2009-03-29 17:59:14 +00:00
|
|
|
error = wi_read_rid(sc, WI_RID_MAC_NODE, macaddr, &buflen);
|
2003-01-15 20:11:31 +00:00
|
|
|
if (error != 0) {
|
|
|
|
|
buflen = IEEE80211_ADDR_LEN;
|
2009-03-29 17:59:14 +00:00
|
|
|
error = wi_read_rid(sc, WI_RID_MAC_NODE, macaddr, &buflen);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2009-03-29 17:59:14 +00:00
|
|
|
if (error || IEEE80211_ADDR_EQ(macaddr, empty_macaddr)) {
|
2003-01-15 20:11:31 +00:00
|
|
|
if (error != 0)
|
|
|
|
|
device_printf(dev, "mac read failed %d\n", error);
|
2005-08-05 04:56:14 +00:00
|
|
|
else {
|
2003-01-15 20:11:31 +00:00
|
|
|
device_printf(dev, "mac read failed (all zeros)\n");
|
2005-08-05 04:56:14 +00:00
|
|
|
error = ENXIO;
|
|
|
|
|
}
|
2001-04-04 06:03:39 +00:00
|
|
|
wi_free(dev);
|
|
|
|
|
return (error);
|
|
|
|
|
}
|
2001-12-05 08:57:36 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
ifp->if_softc = sc;
|
2003-10-31 18:32:15 +00:00
|
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
|
|
|
ifp->if_ioctl = wi_ioctl;
|
|
|
|
|
ifp->if_start = wi_start;
|
|
|
|
|
ifp->if_init = wi_init;
|
2010-05-03 07:32:50 +00:00
|
|
|
IFQ_SET_MAXLEN(&ifp->if_snd, ifqmaxlen);
|
|
|
|
|
ifp->if_snd.ifq_drv_maxlen = ifqmaxlen;
|
2004-08-01 23:58:04 +00:00
|
|
|
IFQ_SET_READY(&ifp->if_snd);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2004-12-08 17:36:28 +00:00
|
|
|
ic->ic_ifp = ifp;
|
2003-01-15 20:11:31 +00:00
|
|
|
ic->ic_phytype = IEEE80211_T_DS;
|
|
|
|
|
ic->ic_opmode = IEEE80211_M_STA;
|
2008-05-12 00:15:30 +00:00
|
|
|
ic->ic_caps = IEEE80211_C_STA
|
|
|
|
|
| IEEE80211_C_PMGT
|
2008-04-20 20:35:46 +00:00
|
|
|
| IEEE80211_C_MONITOR
|
2004-12-08 17:36:28 +00:00
|
|
|
;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-06-28 06:17:26 +00:00
|
|
|
/*
|
|
|
|
|
* Query the card for available channels and setup the
|
|
|
|
|
* channel table. We assume these are all 11b channels.
|
|
|
|
|
*/
|
2003-01-15 20:11:31 +00:00
|
|
|
buflen = sizeof(val);
|
|
|
|
|
if (wi_read_rid(sc, WI_RID_CHANNEL_LIST, &val, &buflen) != 0)
|
|
|
|
|
val = htole16(0x1fff); /* assume 1-11 */
|
2003-06-28 06:17:26 +00:00
|
|
|
KASSERT(val != 0, ("wi_attach: no available channels listed!"));
|
|
|
|
|
|
|
|
|
|
val <<= 1; /* shift for base 1 indices */
|
|
|
|
|
for (i = 1; i < 16; i++) {
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
struct ieee80211_channel *c;
|
|
|
|
|
|
2005-04-13 03:36:24 +00:00
|
|
|
if (!isset((u_int8_t*)&val, i))
|
|
|
|
|
continue;
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
c = &ic->ic_channels[ic->ic_nchans++];
|
|
|
|
|
c->ic_freq = ieee80211_ieee2mhz(i, IEEE80211_CHAN_B);
|
|
|
|
|
c->ic_flags = IEEE80211_CHAN_B;
|
|
|
|
|
c->ic_ieee = i;
|
2008-04-20 20:35:46 +00:00
|
|
|
/* XXX txpowers? */
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
1999-05-06 16:32:45 +00:00
|
|
|
|
2002-06-19 17:37:34 +00:00
|
|
|
/*
|
|
|
|
|
* Set flags based on firmware version.
|
|
|
|
|
*/
|
|
|
|
|
switch (sc->sc_firmware_type) {
|
|
|
|
|
case WI_LUCENT:
|
2003-03-18 04:22:42 +00:00
|
|
|
sc->sc_ntxbuf = 1;
|
2008-04-20 20:35:46 +00:00
|
|
|
ic->ic_caps |= IEEE80211_C_IBSS;
|
2003-09-05 22:29:30 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_ibss_port = WI_PORTTYPE_BSS;
|
|
|
|
|
sc->sc_monitor_port = WI_PORTTYPE_ADHOC;
|
2003-09-05 22:29:30 +00:00
|
|
|
sc->sc_min_rssi = WI_LUCENT_MIN_RSSI;
|
|
|
|
|
sc->sc_max_rssi = WI_LUCENT_MAX_RSSI;
|
|
|
|
|
sc->sc_dbm_offset = WI_LUCENT_DBM_OFFSET;
|
2002-06-19 17:37:34 +00:00
|
|
|
break;
|
|
|
|
|
case WI_INTERSIL:
|
2003-03-18 04:22:42 +00:00
|
|
|
sc->sc_ntxbuf = WI_NTXBUF;
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_flags |= WI_FLAGS_HAS_FRAGTHR
|
|
|
|
|
| WI_FLAGS_HAS_ROAMING;
|
2003-12-09 07:41:07 +00:00
|
|
|
/*
|
|
|
|
|
* Old firmware are slow, so give peace a chance.
|
|
|
|
|
*/
|
|
|
|
|
if (sc->sc_sta_firmware_ver < 10000)
|
|
|
|
|
sc->wi_cmd_count = 5000;
|
2003-01-15 20:11:31 +00:00
|
|
|
if (sc->sc_sta_firmware_ver > 10101)
|
|
|
|
|
sc->sc_flags |= WI_FLAGS_HAS_DBMADJUST;
|
2008-04-20 20:35:46 +00:00
|
|
|
ic->ic_caps |= IEEE80211_C_IBSS;
|
2003-01-16 23:38:08 +00:00
|
|
|
/*
|
|
|
|
|
* version 0.8.3 and newer are the only ones that are known
|
|
|
|
|
* to currently work. Earlier versions can be made to work,
|
2008-04-20 20:35:46 +00:00
|
|
|
* at least according to the Linux driver but we require
|
|
|
|
|
* monitor mode so this is irrelevant.
|
2003-01-16 23:38:08 +00:00
|
|
|
*/
|
2008-04-20 20:35:46 +00:00
|
|
|
ic->ic_caps |= IEEE80211_C_HOSTAP;
|
|
|
|
|
if (sc->sc_sta_firmware_ver >= 10603)
|
|
|
|
|
sc->sc_flags |= WI_FLAGS_HAS_ENHSECURITY;
|
|
|
|
|
if (sc->sc_sta_firmware_ver >= 10700) {
|
|
|
|
|
/*
|
|
|
|
|
* 1.7.0+ have the necessary support for sta mode WPA.
|
|
|
|
|
*/
|
|
|
|
|
sc->sc_flags |= WI_FLAGS_HAS_WPASUPPORT;
|
|
|
|
|
ic->ic_caps |= IEEE80211_C_WPA;
|
|
|
|
|
}
|
2003-09-05 22:29:30 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_ibss_port = WI_PORTTYPE_IBSS;
|
|
|
|
|
sc->sc_monitor_port = WI_PORTTYPE_APSILENT;
|
2003-09-05 22:29:30 +00:00
|
|
|
sc->sc_min_rssi = WI_PRISM_MIN_RSSI;
|
|
|
|
|
sc->sc_max_rssi = WI_PRISM_MAX_RSSI;
|
|
|
|
|
sc->sc_dbm_offset = WI_PRISM_DBM_OFFSET;
|
2002-06-19 17:37:34 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
|
2000-02-02 17:59:13 +00:00
|
|
|
/*
|
|
|
|
|
* Find out if we support WEP on this card.
|
|
|
|
|
*/
|
2003-01-15 20:11:31 +00:00
|
|
|
buflen = sizeof(val);
|
|
|
|
|
if (wi_read_rid(sc, WI_RID_WEP_AVAIL, &val, &buflen) == 0 &&
|
|
|
|
|
val != htole16(0))
|
2008-04-20 20:35:46 +00:00
|
|
|
ic->ic_cryptocaps |= IEEE80211_CRYPTO_WEP;
|
2003-01-15 20:11:31 +00:00
|
|
|
|
|
|
|
|
/* Find supported rates. */
|
|
|
|
|
buflen = sizeof(ratebuf);
|
2003-06-28 06:17:26 +00:00
|
|
|
rs = &ic->ic_sup_rates[IEEE80211_MODE_11B];
|
2003-01-15 20:11:31 +00:00
|
|
|
if (wi_read_rid(sc, WI_RID_DATA_RATES, ratebuf, &buflen) == 0) {
|
2003-06-28 06:17:26 +00:00
|
|
|
nrates = le16toh(*(u_int16_t *)ratebuf);
|
|
|
|
|
if (nrates > IEEE80211_RATE_MAXSIZE)
|
|
|
|
|
nrates = IEEE80211_RATE_MAXSIZE;
|
|
|
|
|
rs->rs_nrates = 0;
|
|
|
|
|
for (i = 0; i < nrates; i++)
|
|
|
|
|
if (ratebuf[2+i])
|
|
|
|
|
rs->rs_rates[rs->rs_nrates++] = ratebuf[2+i];
|
2003-01-15 20:11:31 +00:00
|
|
|
} else {
|
|
|
|
|
/* XXX fallback on error? */
|
|
|
|
|
}
|
2000-02-02 17:59:13 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
buflen = sizeof(val);
|
|
|
|
|
if ((sc->sc_flags & WI_FLAGS_HAS_DBMADJUST) &&
|
|
|
|
|
wi_read_rid(sc, WI_RID_DBM_ADJUST, &val, &buflen) == 0) {
|
2003-09-05 22:29:30 +00:00
|
|
|
sc->sc_dbm_offset = le16toh(val);
|
|
|
|
|
}
|
2000-12-15 23:34:13 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_portnum = WI_DEFAULT_PORT;
|
|
|
|
|
|
2009-03-29 17:59:14 +00:00
|
|
|
ieee80211_ifattach(ic, macaddr);
|
2006-08-05 04:58:25 +00:00
|
|
|
ic->ic_raw_xmit = wi_raw_xmit;
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
ic->ic_scan_start = wi_scan_start;
|
|
|
|
|
ic->ic_scan_end = wi_scan_end;
|
|
|
|
|
ic->ic_set_channel = wi_set_channel;
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
ic->ic_vap_create = wi_vap_create;
|
|
|
|
|
ic->ic_vap_delete = wi_vap_delete;
|
|
|
|
|
ic->ic_update_mcast = wi_update_mcast;
|
2009-05-20 20:00:40 +00:00
|
|
|
ic->ic_update_promisc = wi_update_promisc;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2009-05-20 20:00:40 +00:00
|
|
|
ieee80211_radiotap_attach(ic,
|
|
|
|
|
&sc->sc_tx_th.wt_ihdr, sizeof(sc->sc_tx_th),
|
|
|
|
|
WI_TX_RADIOTAP_PRESENT,
|
|
|
|
|
&sc->sc_rx_th.wr_ihdr, sizeof(sc->sc_rx_th),
|
|
|
|
|
WI_RX_RADIOTAP_PRESENT);
|
2004-12-08 17:36:28 +00:00
|
|
|
|
|
|
|
|
if (bootverbose)
|
|
|
|
|
ieee80211_announce(ic);
|
|
|
|
|
|
2008-07-26 17:04:30 +00:00
|
|
|
error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET | INTR_MPSAFE,
|
|
|
|
|
NULL, wi_intr, sc, &sc->wi_intrhand);
|
|
|
|
|
if (error) {
|
|
|
|
|
device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
|
|
|
|
|
ieee80211_ifdetach(ic);
|
|
|
|
|
if_free(sc->sc_ifp);
|
|
|
|
|
wi_free(dev);
|
|
|
|
|
return error;
|
|
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
return (0);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
int
|
|
|
|
|
wi_detach(device_t dev)
|
2001-12-05 08:57:36 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_softc *sc = device_get_softc(dev);
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
2001-12-05 08:57:36 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_LOCK(sc);
|
2002-04-03 19:44:17 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* check if device was removed */
|
2003-12-02 04:59:59 +00:00
|
|
|
sc->wi_gone |= !bus_child_present(dev);
|
2001-12-05 08:57:36 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_stop_locked(sc, 0);
|
2005-09-28 09:27:46 +00:00
|
|
|
WI_UNLOCK(sc);
|
2008-04-20 20:35:46 +00:00
|
|
|
ieee80211_ifdetach(ic);
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
bus_teardown_intr(dev, sc->irq, sc->wi_intrhand);
|
2005-09-19 03:10:21 +00:00
|
|
|
if_free(sc->sc_ifp);
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_free(dev);
|
|
|
|
|
mtx_destroy(&sc->sc_mtx);
|
|
|
|
|
return (0);
|
2001-12-05 08:57:36 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static struct ieee80211vap *
|
|
|
|
|
wi_vap_create(struct ieee80211com *ic,
|
|
|
|
|
const char name[IFNAMSIZ], int unit, int opmode, int flags,
|
|
|
|
|
const uint8_t bssid[IEEE80211_ADDR_LEN],
|
|
|
|
|
const uint8_t mac[IEEE80211_ADDR_LEN])
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
struct wi_softc *sc = ic->ic_ifp->if_softc;
|
|
|
|
|
struct wi_vap *wvp;
|
|
|
|
|
struct ieee80211vap *vap;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
if (!TAILQ_EMPTY(&ic->ic_vaps)) /* only one at a time */
|
|
|
|
|
return NULL;
|
|
|
|
|
wvp = (struct wi_vap *) malloc(sizeof(struct wi_vap),
|
|
|
|
|
M_80211_VAP, M_NOWAIT | M_ZERO);
|
|
|
|
|
if (wvp == NULL)
|
|
|
|
|
return NULL;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
vap = &wvp->wv_vap;
|
|
|
|
|
ieee80211_vap_setup(ic, vap, name, unit, opmode, flags, bssid, mac);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
vap->iv_max_aid = WI_MAX_AID;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
switch (opmode) {
|
|
|
|
|
case IEEE80211_M_STA:
|
|
|
|
|
sc->sc_porttype = WI_PORTTYPE_BSS;
|
|
|
|
|
wvp->wv_newstate = vap->iv_newstate;
|
|
|
|
|
vap->iv_newstate = wi_newstate_sta;
|
|
|
|
|
/* need to filter mgt frames to avoid confusing state machine */
|
|
|
|
|
wvp->wv_recv_mgmt = vap->iv_recv_mgmt;
|
|
|
|
|
vap->iv_recv_mgmt = wi_recv_mgmt;
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
case IEEE80211_M_IBSS:
|
|
|
|
|
sc->sc_porttype = sc->sc_ibss_port;
|
|
|
|
|
wvp->wv_newstate = vap->iv_newstate;
|
|
|
|
|
vap->iv_newstate = wi_newstate_sta;
|
|
|
|
|
break;
|
|
|
|
|
case IEEE80211_M_AHDEMO:
|
|
|
|
|
sc->sc_porttype = WI_PORTTYPE_ADHOC;
|
|
|
|
|
break;
|
|
|
|
|
case IEEE80211_M_HOSTAP:
|
|
|
|
|
sc->sc_porttype = WI_PORTTYPE_HOSTAP;
|
|
|
|
|
wvp->wv_newstate = vap->iv_newstate;
|
|
|
|
|
vap->iv_newstate = wi_newstate_hostap;
|
|
|
|
|
break;
|
|
|
|
|
case IEEE80211_M_MONITOR:
|
|
|
|
|
sc->sc_porttype = sc->sc_monitor_port;
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
default:
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
|
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
|
|
|
|
|
/* complete setup */
|
|
|
|
|
ieee80211_vap_attach(vap, ieee80211_media_change, wi_media_status);
|
|
|
|
|
ic->ic_opmode = opmode;
|
|
|
|
|
return vap;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
wi_vap_delete(struct ieee80211vap *vap)
|
|
|
|
|
{
|
|
|
|
|
struct wi_vap *wvp = WI_VAP(vap);
|
|
|
|
|
|
|
|
|
|
ieee80211_vap_detach(vap);
|
|
|
|
|
free(wvp, M_80211_VAP);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2009-06-11 17:14:28 +00:00
|
|
|
int
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_shutdown(device_t dev)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = device_get_softc(dev);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_stop(sc, 1);
|
2009-06-11 17:14:28 +00:00
|
|
|
return (0);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
void
|
|
|
|
|
wi_intr(void *arg)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = arg;
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2003-03-18 04:22:42 +00:00
|
|
|
u_int16_t status;
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_LOCK(sc);
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2003-12-02 04:59:59 +00:00
|
|
|
if (sc->wi_gone || !sc->sc_enabled || (ifp->if_flags & IFF_UP) == 0) {
|
2003-01-15 20:11:31 +00:00
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
2003-12-02 04:59:59 +00:00
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
|
2003-03-18 04:22:42 +00:00
|
|
|
/* Disable interrupts. */
|
|
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2003-03-18 04:22:42 +00:00
|
|
|
status = CSR_READ_2(sc, WI_EVENT_STAT);
|
|
|
|
|
if (status & WI_EV_RX)
|
|
|
|
|
wi_rx_intr(sc);
|
|
|
|
|
if (status & WI_EV_ALLOC)
|
|
|
|
|
wi_tx_intr(sc);
|
|
|
|
|
if (status & WI_EV_TX_EXC)
|
|
|
|
|
wi_tx_ex_intr(sc);
|
|
|
|
|
if (status & WI_EV_INFO)
|
|
|
|
|
wi_info_intr(sc);
|
2005-08-09 10:20:02 +00:00
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0 &&
|
2004-08-01 23:58:04 +00:00
|
|
|
!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
2006-12-11 00:35:51 +00:00
|
|
|
wi_start_locked(ifp);
|
2003-03-18 04:22:42 +00:00
|
|
|
|
|
|
|
|
/* Re-enable interrupts. */
|
|
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_UNLOCK(sc);
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
return;
|
|
|
|
|
}
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void
|
|
|
|
|
wi_enable(struct wi_softc *sc)
|
2003-01-15 20:11:31 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
/* Enable interrupts */
|
|
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, WI_INTRS);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
/* enable port */
|
|
|
|
|
wi_cmd(sc, WI_CMD_ENABLE | sc->sc_portnum, 0, 0, 0);
|
|
|
|
|
sc->sc_enabled = 1;
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static int
|
|
|
|
|
wi_setup_locked(struct wi_softc *sc, int porttype, int mode,
|
|
|
|
|
uint8_t mac[IEEE80211_ADDR_LEN])
|
|
|
|
|
{
|
|
|
|
|
int i;
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_reset(sc);
|
2002-04-11 07:21:16 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_val(sc, WI_RID_PORTTYPE, porttype);
|
|
|
|
|
wi_write_val(sc, WI_RID_CREATE_IBSS, mode);
|
|
|
|
|
wi_write_val(sc, WI_RID_MAX_DATALEN, 2304);
|
|
|
|
|
/* XXX IEEE80211_BPF_NOACK wants 0 */
|
|
|
|
|
wi_write_val(sc, WI_RID_ALT_RETRY_CNT, 2);
|
|
|
|
|
if (sc->sc_flags & WI_FLAGS_HAS_ROAMING)
|
|
|
|
|
wi_write_val(sc, WI_RID_ROAMING_MODE, 3); /* NB: disabled */
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_rid(sc, WI_RID_MAC_NODE, mac, IEEE80211_ADDR_LEN);
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
/* Allocate fids for the card */
|
|
|
|
|
sc->sc_buflen = IEEE80211_MAX_LEN + sizeof(struct wi_frame);
|
|
|
|
|
for (i = 0; i < sc->sc_ntxbuf; i++) {
|
|
|
|
|
int error = wi_alloc_fid(sc, sc->sc_buflen,
|
|
|
|
|
&sc->sc_txd[i].d_fid);
|
|
|
|
|
if (error) {
|
|
|
|
|
device_printf(sc->sc_dev,
|
|
|
|
|
"tx buffer allocation failed (error %u)\n",
|
|
|
|
|
error);
|
|
|
|
|
return error;
|
2006-08-05 04:58:25 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_txd[i].d_len = 0;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_txcur = sc->sc_txnext = 0;
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
return 0;
|
|
|
|
|
}
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void
|
|
|
|
|
wi_init_locked(struct wi_softc *sc)
|
|
|
|
|
{
|
|
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
|
|
|
int wasenabled;
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
WI_LOCK_ASSERT(sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wasenabled = sc->sc_enabled;
|
|
|
|
|
if (wasenabled)
|
|
|
|
|
wi_stop_locked(sc, 1);
|
2003-01-15 20:11:31 +00:00
|
|
|
|
2009-03-29 17:59:14 +00:00
|
|
|
if (wi_setup_locked(sc, sc->sc_porttype, 3, IF_LLADDR(ifp)) != 0) {
|
2008-04-20 20:35:46 +00:00
|
|
|
if_printf(ifp, "interface not running\n");
|
|
|
|
|
wi_stop_locked(sc, 1);
|
|
|
|
|
return;
|
2002-03-29 00:26:23 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2005-08-09 10:20:02 +00:00
|
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
2003-01-15 20:11:31 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
callout_reset(&sc->sc_watchdog, hz, wi_watchdog, sc);
|
2003-01-15 20:11:31 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_enable(sc); /* Enable desired port */
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
void
|
|
|
|
|
wi_init(void *arg)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = arg;
|
|
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
|
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
2006-12-11 00:41:22 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_init_locked(sc);
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_UNLOCK(sc);
|
2008-04-20 20:35:46 +00:00
|
|
|
|
2008-05-10 20:25:59 +00:00
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
|
|
|
ieee80211_start_all(ic); /* start all vap's */
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void
|
|
|
|
|
wi_stop_locked(struct wi_softc *sc, int disable)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
WI_LOCK_ASSERT(sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (sc->sc_enabled && !sc->wi_gone) {
|
|
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
|
|
|
|
wi_cmd(sc, WI_CMD_DISABLE | sc->sc_portnum, 0, 0, 0);
|
2008-04-20 20:35:46 +00:00
|
|
|
if (disable)
|
2003-06-28 06:17:26 +00:00
|
|
|
sc->sc_enabled = 0;
|
2003-12-02 04:59:59 +00:00
|
|
|
} else if (sc->wi_gone && disable) /* gone --> not enabled */
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_enabled = 0;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
callout_stop(&sc->sc_watchdog);
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_tx_timer = 0;
|
|
|
|
|
sc->sc_false_syns = 0;
|
2008-04-20 20:35:46 +00:00
|
|
|
|
2005-08-09 10:20:02 +00:00
|
|
|
ifp->if_drv_flags &= ~(IFF_DRV_OACTIVE | IFF_DRV_RUNNING);
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
void
|
|
|
|
|
wi_stop(struct wi_softc *sc, int disable)
|
|
|
|
|
{
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_stop_locked(sc, disable);
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_UNLOCK(sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2002-10-14 01:59:57 +00:00
|
|
|
static void
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_set_channel(struct ieee80211com *ic)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
DPRINTF(("%s: channel %d, %sscanning\n", __func__,
|
|
|
|
|
ieee80211_chan2ieee(ic, ic->ic_curchan),
|
|
|
|
|
ic->ic_flags & IEEE80211_F_SCAN ? "" : "!"));
|
2002-03-29 00:26:23 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_write_val(sc, WI_RID_OWN_CHNL,
|
|
|
|
|
ieee80211_chan2ieee(ic, ic->ic_curchan));
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
}
|
2003-08-19 22:17:04 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void
|
|
|
|
|
wi_scan_start(struct ieee80211com *ic)
|
|
|
|
|
{
|
|
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
struct ieee80211_scan_state *ss = ic->ic_scan;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
DPRINTF(("%s\n", __func__));
|
|
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
/*
|
|
|
|
|
* Switch device to monitor mode.
|
|
|
|
|
*/
|
|
|
|
|
wi_write_val(sc, WI_RID_PORTTYPE, sc->sc_monitor_port);
|
|
|
|
|
if (sc->sc_firmware_type == WI_INTERSIL) {
|
|
|
|
|
wi_cmd(sc, WI_CMD_DISABLE | WI_PORT0, 0, 0, 0);
|
|
|
|
|
wi_cmd(sc, WI_CMD_ENABLE | WI_PORT0, 0, 0, 0);
|
|
|
|
|
}
|
|
|
|
|
/* force full dwell time to compensate for firmware overhead */
|
|
|
|
|
ss->ss_mindwell = ss->ss_maxdwell = msecs_to_ticks(400);
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
wi_scan_end(struct ieee80211com *ic)
|
|
|
|
|
{
|
|
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
|
|
|
|
|
DPRINTF(("%s: restore port type %d\n", __func__, sc->sc_porttype));
|
|
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_write_val(sc, WI_RID_PORTTYPE, sc->sc_porttype);
|
|
|
|
|
if (sc->sc_firmware_type == WI_INTERSIL) {
|
|
|
|
|
wi_cmd(sc, WI_CMD_DISABLE | WI_PORT0, 0, 0, 0);
|
|
|
|
|
wi_cmd(sc, WI_CMD_ENABLE | WI_PORT0, 0, 0, 0);
|
|
|
|
|
}
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
wi_recv_mgmt(struct ieee80211_node *ni, struct mbuf *m,
|
2009-05-20 20:00:40 +00:00
|
|
|
int subtype, int rssi, int nf)
|
2008-04-20 20:35:46 +00:00
|
|
|
{
|
|
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
|
|
|
|
|
|
|
|
|
switch (subtype) {
|
|
|
|
|
case IEEE80211_FC0_SUBTYPE_AUTH:
|
|
|
|
|
case IEEE80211_FC0_SUBTYPE_ASSOC_RESP:
|
|
|
|
|
case IEEE80211_FC0_SUBTYPE_REASSOC_RESP:
|
|
|
|
|
/* NB: filter frames that trigger state changes */
|
|
|
|
|
return;
|
|
|
|
|
}
|
2009-05-20 20:00:40 +00:00
|
|
|
WI_VAP(vap)->wv_recv_mgmt(ni, m, subtype, rssi, nf);
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
wi_newstate_sta(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
|
|
|
{
|
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
|
|
|
|
struct ieee80211_node *bss;
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
|
|
|
|
|
DPRINTF(("%s: %s -> %s\n", __func__,
|
|
|
|
|
ieee80211_state_name[vap->iv_state],
|
|
|
|
|
ieee80211_state_name[nstate]));
|
|
|
|
|
|
|
|
|
|
if (nstate == IEEE80211_S_AUTH) {
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_setup_locked(sc, WI_PORTTYPE_BSS, 3, vap->iv_myaddr);
|
|
|
|
|
|
|
|
|
|
if (vap->iv_flags & IEEE80211_F_PMGTON) {
|
|
|
|
|
wi_write_val(sc, WI_RID_MAX_SLEEP, ic->ic_lintval);
|
|
|
|
|
wi_write_val(sc, WI_RID_PM_ENABLED, 1);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_val(sc, WI_RID_RTS_THRESH, vap->iv_rtsthreshold);
|
|
|
|
|
if (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)
|
|
|
|
|
wi_write_val(sc, WI_RID_FRAG_THRESH,
|
|
|
|
|
vap->iv_fragthreshold);
|
|
|
|
|
wi_write_txrate(sc, vap);
|
|
|
|
|
|
|
|
|
|
bss = vap->iv_bss;
|
|
|
|
|
wi_write_ssid(sc, WI_RID_DESIRED_SSID, bss->ni_essid, bss->ni_esslen);
|
|
|
|
|
wi_write_val(sc, WI_RID_OWN_CHNL,
|
|
|
|
|
ieee80211_chan2ieee(ic, bss->ni_chan));
|
|
|
|
|
|
|
|
|
|
/* Configure WEP. */
|
|
|
|
|
if (ic->ic_cryptocaps & IEEE80211_CRYPTO_WEP)
|
|
|
|
|
wi_write_wep(sc, vap);
|
|
|
|
|
else
|
|
|
|
|
sc->sc_encryption = 0;
|
|
|
|
|
|
|
|
|
|
if ((sc->sc_flags & WI_FLAGS_HAS_WPASUPPORT) &&
|
|
|
|
|
(vap->iv_flags & IEEE80211_F_WPA)) {
|
|
|
|
|
wi_write_val(sc, WI_RID_WPA_HANDLING, 1);
|
|
|
|
|
if (vap->iv_appie_wpa != NULL)
|
|
|
|
|
wi_write_appie(sc, WI_RID_WPA_DATA,
|
|
|
|
|
vap->iv_appie_wpa);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
wi_enable(sc); /* enable port */
|
|
|
|
|
|
|
|
|
|
/* Lucent firmware does not support the JOIN RID. */
|
|
|
|
|
if (sc->sc_firmware_type == WI_INTERSIL) {
|
|
|
|
|
struct wi_joinreq join;
|
|
|
|
|
|
|
|
|
|
memset(&join, 0, sizeof(join));
|
|
|
|
|
IEEE80211_ADDR_COPY(&join.wi_bssid, bss->ni_bssid);
|
|
|
|
|
join.wi_chan = htole16(
|
|
|
|
|
ieee80211_chan2ieee(ic, bss->ni_chan));
|
|
|
|
|
wi_write_rid(sc, WI_RID_JOIN_REQ, &join, sizeof(join));
|
|
|
|
|
}
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
|
|
|
|
|
/*
|
|
|
|
|
* NB: don't go through 802.11 layer, it'll send auth frame;
|
|
|
|
|
* instead we drive the state machine from the link status
|
|
|
|
|
* notification we get on association.
|
|
|
|
|
*/
|
|
|
|
|
vap->iv_state = nstate;
|
2009-05-02 15:14:18 +00:00
|
|
|
return (0);
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
|
|
|
|
return WI_VAP(vap)->wv_newstate(vap, nstate, arg);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
wi_newstate_hostap(struct ieee80211vap *vap, enum ieee80211_state nstate, int arg)
|
|
|
|
|
{
|
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
|
|
|
|
struct ieee80211_node *bss;
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
int error;
|
|
|
|
|
|
|
|
|
|
DPRINTF(("%s: %s -> %s\n", __func__,
|
|
|
|
|
ieee80211_state_name[vap->iv_state],
|
|
|
|
|
ieee80211_state_name[nstate]));
|
|
|
|
|
|
|
|
|
|
error = WI_VAP(vap)->wv_newstate(vap, nstate, arg);
|
|
|
|
|
if (error == 0 && nstate == IEEE80211_S_RUN) {
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_setup_locked(sc, WI_PORTTYPE_HOSTAP, 0, vap->iv_myaddr);
|
|
|
|
|
|
|
|
|
|
bss = vap->iv_bss;
|
|
|
|
|
wi_write_ssid(sc, WI_RID_OWN_SSID,
|
|
|
|
|
bss->ni_essid, bss->ni_esslen);
|
|
|
|
|
wi_write_val(sc, WI_RID_OWN_CHNL,
|
|
|
|
|
ieee80211_chan2ieee(ic, bss->ni_chan));
|
|
|
|
|
wi_write_val(sc, WI_RID_BASIC_RATE, 0x3);
|
|
|
|
|
wi_write_val(sc, WI_RID_SUPPORT_RATE, 0xf);
|
|
|
|
|
wi_write_txrate(sc, vap);
|
2004-12-08 17:36:28 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_val(sc, WI_RID_OWN_BEACON_INT, bss->ni_intval);
|
|
|
|
|
wi_write_val(sc, WI_RID_DTIM_PERIOD, vap->iv_dtim_period);
|
|
|
|
|
|
|
|
|
|
wi_write_val(sc, WI_RID_RTS_THRESH, vap->iv_rtsthreshold);
|
|
|
|
|
if (sc->sc_flags & WI_FLAGS_HAS_FRAGTHR)
|
|
|
|
|
wi_write_val(sc, WI_RID_FRAG_THRESH,
|
|
|
|
|
vap->iv_fragthreshold);
|
|
|
|
|
|
|
|
|
|
if ((sc->sc_flags & WI_FLAGS_HAS_ENHSECURITY) &&
|
|
|
|
|
(vap->iv_flags & IEEE80211_F_HIDESSID)) {
|
|
|
|
|
/*
|
|
|
|
|
* bit 0 means hide SSID in beacons,
|
|
|
|
|
* bit 1 means don't respond to bcast probe req
|
|
|
|
|
*/
|
|
|
|
|
wi_write_val(sc, WI_RID_ENH_SECURITY, 0x3);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
if ((sc->sc_flags & WI_FLAGS_HAS_WPASUPPORT) &&
|
|
|
|
|
(vap->iv_flags & IEEE80211_F_WPA) &&
|
|
|
|
|
vap->iv_appie_wpa != NULL)
|
|
|
|
|
wi_write_appie(sc, WI_RID_WPA_DATA, vap->iv_appie_wpa);
|
|
|
|
|
|
|
|
|
|
wi_write_val(sc, WI_RID_PROMISC, 0);
|
|
|
|
|
|
|
|
|
|
/* Configure WEP. */
|
|
|
|
|
if (ic->ic_cryptocaps & IEEE80211_CRYPTO_WEP)
|
|
|
|
|
wi_write_wep(sc, vap);
|
|
|
|
|
else
|
|
|
|
|
sc->sc_encryption = 0;
|
|
|
|
|
|
|
|
|
|
wi_enable(sc); /* enable port */
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
}
|
|
|
|
|
return error;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
wi_start_locked(struct ifnet *ifp)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
struct ieee80211_node *ni;
|
|
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
|
struct mbuf *m0;
|
|
|
|
|
struct ieee80211_key *k;
|
|
|
|
|
struct wi_frame frmhdr;
|
2009-03-30 21:53:27 +00:00
|
|
|
const struct llc *llc;
|
2008-04-20 20:35:46 +00:00
|
|
|
int cur;
|
|
|
|
|
|
|
|
|
|
WI_LOCK_ASSERT(sc);
|
|
|
|
|
|
|
|
|
|
if (sc->wi_gone)
|
|
|
|
|
return;
|
|
|
|
|
|
|
|
|
|
memset(&frmhdr, 0, sizeof(frmhdr));
|
|
|
|
|
cur = sc->sc_txnext;
|
|
|
|
|
for (;;) {
|
|
|
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m0);
|
|
|
|
|
if (m0 == NULL)
|
|
|
|
|
break;
|
|
|
|
|
if (sc->sc_txd[cur].d_len != 0) {
|
|
|
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m0);
|
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
ni = (struct ieee80211_node *) m0->m_pkthdr.rcvif;
|
|
|
|
|
|
2009-03-30 21:53:27 +00:00
|
|
|
/* reconstruct 802.3 header */
|
2008-04-20 20:35:46 +00:00
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
2009-03-30 21:53:27 +00:00
|
|
|
switch (wh->i_fc[1]) {
|
|
|
|
|
case IEEE80211_FC1_DIR_TODS:
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_shost,
|
|
|
|
|
wh->i_addr2);
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_dhost,
|
|
|
|
|
wh->i_addr3);
|
|
|
|
|
break;
|
|
|
|
|
case IEEE80211_FC1_DIR_NODS:
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_shost,
|
|
|
|
|
wh->i_addr2);
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_dhost,
|
|
|
|
|
wh->i_addr1);
|
|
|
|
|
break;
|
|
|
|
|
case IEEE80211_FC1_DIR_FROMDS:
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_shost,
|
|
|
|
|
wh->i_addr3);
|
|
|
|
|
IEEE80211_ADDR_COPY(frmhdr.wi_ehdr.ether_dhost,
|
|
|
|
|
wh->i_addr1);
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
llc = (const struct llc *)(
|
|
|
|
|
mtod(m0, const uint8_t *) + ieee80211_hdrsize(wh));
|
|
|
|
|
frmhdr.wi_ehdr.ether_type = llc->llc_snap.ether_type;
|
2008-04-20 20:35:46 +00:00
|
|
|
frmhdr.wi_tx_ctl = htole16(WI_ENC_TX_802_11|WI_TXCNTL_TX_EX);
|
|
|
|
|
if (wh->i_fc[1] & IEEE80211_FC1_WEP) {
|
|
|
|
|
k = ieee80211_crypto_encap(ni, m0);
|
2004-12-08 17:36:28 +00:00
|
|
|
if (k == NULL) {
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
ieee80211_free_node(ni);
|
2005-03-08 17:01:03 +00:00
|
|
|
m_freem(m0);
|
2003-01-15 20:11:31 +00:00
|
|
|
continue;
|
|
|
|
|
}
|
2004-12-17 03:57:16 +00:00
|
|
|
frmhdr.wi_tx_ctl |= htole16(WI_TXCNTL_NOCRYPT);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
|
2009-05-20 20:00:40 +00:00
|
|
|
if (ieee80211_radiotap_active_vap(ni->ni_vap)) {
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_tx_th.wt_rate = ni->ni_txrate;
|
2009-05-20 20:00:40 +00:00
|
|
|
ieee80211_radiotap_tx(ni->ni_vap, m0);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
|
2004-04-01 00:33:33 +00:00
|
|
|
m_copydata(m0, 0, sizeof(struct ieee80211_frame),
|
|
|
|
|
(caddr_t)&frmhdr.wi_whdr);
|
|
|
|
|
m_adj(m0, sizeof(struct ieee80211_frame));
|
|
|
|
|
frmhdr.wi_dat_len = htole16(m0->m_pkthdr.len);
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
ieee80211_free_node(ni);
|
2006-08-05 04:58:25 +00:00
|
|
|
if (wi_start_tx(ifp, &frmhdr, m0))
|
2003-01-15 20:11:31 +00:00
|
|
|
continue;
|
2008-04-20 20:35:46 +00:00
|
|
|
|
2006-08-05 04:58:25 +00:00
|
|
|
sc->sc_txnext = cur = (cur + 1) % sc->sc_ntxbuf;
|
2008-04-20 20:35:46 +00:00
|
|
|
ifp->if_opackets++;
|
2006-08-05 04:58:25 +00:00
|
|
|
}
|
2006-12-11 00:35:51 +00:00
|
|
|
}
|
2006-08-05 04:58:25 +00:00
|
|
|
|
2006-12-11 00:35:51 +00:00
|
|
|
static void
|
|
|
|
|
wi_start(struct ifnet *ifp)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
wi_start_locked(ifp);
|
2006-08-05 04:58:25 +00:00
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
wi_start_tx(struct ifnet *ifp, struct wi_frame *frmhdr, struct mbuf *m0)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
int cur = sc->sc_txnext;
|
|
|
|
|
int fid, off, error;
|
|
|
|
|
|
|
|
|
|
fid = sc->sc_txd[cur].d_fid;
|
|
|
|
|
off = sizeof(*frmhdr);
|
|
|
|
|
error = wi_write_bap(sc, fid, 0, frmhdr, sizeof(*frmhdr)) != 0
|
|
|
|
|
|| wi_mwrite_bap(sc, fid, off, m0, m0->m_pkthdr.len) != 0;
|
|
|
|
|
m_freem(m0);
|
|
|
|
|
if (error) {
|
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
|
return -1;
|
|
|
|
|
}
|
|
|
|
|
sc->sc_txd[cur].d_len = off;
|
|
|
|
|
if (sc->sc_txcur == cur) {
|
|
|
|
|
if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, fid, 0, 0)) {
|
|
|
|
|
if_printf(ifp, "xmit failed\n");
|
|
|
|
|
sc->sc_txd[cur].d_len = 0;
|
|
|
|
|
return -1;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2006-08-05 04:58:25 +00:00
|
|
|
sc->sc_tx_timer = 5;
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
wi_raw_xmit(struct ieee80211_node *ni, struct mbuf *m0,
|
|
|
|
|
const struct ieee80211_bpf_params *params)
|
|
|
|
|
{
|
|
|
|
|
struct ieee80211com *ic = ni->ni_ic;
|
|
|
|
|
struct ifnet *ifp = ic->ic_ifp;
|
2009-05-20 20:00:40 +00:00
|
|
|
struct ieee80211vap *vap = ni->ni_vap;
|
2006-08-05 04:58:25 +00:00
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211_key *k;
|
2006-08-05 04:58:25 +00:00
|
|
|
struct ieee80211_frame *wh;
|
|
|
|
|
struct wi_frame frmhdr;
|
|
|
|
|
int cur;
|
|
|
|
|
int rc = 0;
|
|
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
|
|
|
|
|
if (sc->wi_gone) {
|
|
|
|
|
rc = ENETDOWN;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
memset(&frmhdr, 0, sizeof(frmhdr));
|
|
|
|
|
cur = sc->sc_txnext;
|
|
|
|
|
if (sc->sc_txd[cur].d_len != 0) {
|
|
|
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
|
|
|
rc = ENOBUFS;
|
|
|
|
|
goto out;
|
|
|
|
|
}
|
|
|
|
|
m0->m_pkthdr.rcvif = NULL;
|
|
|
|
|
|
|
|
|
|
m_copydata(m0, 4, ETHER_ADDR_LEN * 2,
|
|
|
|
|
(caddr_t)&frmhdr.wi_ehdr);
|
|
|
|
|
frmhdr.wi_ehdr.ether_type = 0;
|
|
|
|
|
wh = mtod(m0, struct ieee80211_frame *);
|
|
|
|
|
|
|
|
|
|
frmhdr.wi_tx_ctl = htole16(WI_ENC_TX_802_11|WI_TXCNTL_TX_EX);
|
|
|
|
|
if (params && (params->ibp_flags & IEEE80211_BPF_NOACK))
|
|
|
|
|
frmhdr.wi_tx_ctl |= htole16(WI_TXCNTL_ALTRTRY);
|
|
|
|
|
if ((wh->i_fc[1] & IEEE80211_FC1_WEP) &&
|
2008-04-20 20:35:46 +00:00
|
|
|
(!params || (params && (params->ibp_flags & IEEE80211_BPF_CRYPTO)))) {
|
|
|
|
|
k = ieee80211_crypto_encap(ni, m0);
|
|
|
|
|
if (k == NULL) {
|
|
|
|
|
rc = ENOMEM;
|
|
|
|
|
goto out;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
frmhdr.wi_tx_ctl |= htole16(WI_TXCNTL_NOCRYPT);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
2009-05-20 20:00:40 +00:00
|
|
|
if (ieee80211_radiotap_active_vap(vap)) {
|
2008-04-20 20:35:46 +00:00
|
|
|
sc->sc_tx_th.wt_rate = ni->ni_txrate;
|
2009-05-20 20:00:40 +00:00
|
|
|
ieee80211_radiotap_tx(vap, m0);
|
2006-08-05 04:58:25 +00:00
|
|
|
}
|
|
|
|
|
m_copydata(m0, 0, sizeof(struct ieee80211_frame),
|
|
|
|
|
(caddr_t)&frmhdr.wi_whdr);
|
|
|
|
|
m_adj(m0, sizeof(struct ieee80211_frame));
|
|
|
|
|
frmhdr.wi_dat_len = htole16(m0->m_pkthdr.len);
|
2007-04-19 13:09:57 +00:00
|
|
|
if (wi_start_tx(ifp, &frmhdr, m0) < 0) {
|
|
|
|
|
m0 = NULL;
|
|
|
|
|
rc = EIO;
|
2006-08-05 04:58:25 +00:00
|
|
|
goto out;
|
2007-04-19 13:09:57 +00:00
|
|
|
}
|
|
|
|
|
m0 = NULL;
|
2006-08-05 04:58:25 +00:00
|
|
|
|
|
|
|
|
sc->sc_txnext = cur = (cur + 1) % sc->sc_ntxbuf;
|
|
|
|
|
out:
|
2003-01-15 20:11:31 +00:00
|
|
|
WI_UNLOCK(sc);
|
2006-08-05 04:58:25 +00:00
|
|
|
|
2007-04-19 13:09:57 +00:00
|
|
|
if (m0 != NULL)
|
|
|
|
|
m_freem(m0);
|
|
|
|
|
ieee80211_free_node(ni);
|
2006-08-05 04:58:25 +00:00
|
|
|
return rc;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_reset(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2003-04-27 15:56:05 +00:00
|
|
|
#define WI_INIT_TRIES 3
|
2008-04-20 20:35:46 +00:00
|
|
|
int i, error = 0;
|
2003-03-18 02:54:39 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
for (i = 0; i < WI_INIT_TRIES; i++) {
|
|
|
|
|
error = wi_cmd(sc, WI_CMD_INI, 0, 0, 0);
|
|
|
|
|
if (error == 0)
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
|
|
|
|
DELAY(WI_DELAY * 1000);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
2003-04-27 15:56:05 +00:00
|
|
|
sc->sc_reset = 1;
|
2008-04-20 20:35:46 +00:00
|
|
|
if (i == WI_INIT_TRIES) {
|
|
|
|
|
if_printf(sc->sc_ifp, "reset failed\n");
|
|
|
|
|
return error;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
CSR_WRITE_2(sc, WI_INT_EN, 0);
|
2003-04-27 15:56:05 +00:00
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, 0xFFFF);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* Calibrate timer. */
|
2003-04-27 15:56:05 +00:00
|
|
|
wi_write_val(sc, WI_RID_TICK_TIME, 8);
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
return 0;
|
2003-01-15 20:11:31 +00:00
|
|
|
#undef WI_INIT_TRIES
|
|
|
|
|
}
|
2001-04-10 05:29:26 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static void
|
2006-12-11 00:41:22 +00:00
|
|
|
wi_watchdog(void *arg)
|
2003-01-15 20:11:31 +00:00
|
|
|
{
|
2006-12-11 00:41:22 +00:00
|
|
|
struct wi_softc *sc = arg;
|
|
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
WI_LOCK_ASSERT(sc);
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (!sc->sc_enabled)
|
|
|
|
|
return;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->sc_tx_timer && --sc->sc_tx_timer == 0) {
|
|
|
|
|
if_printf(ifp, "device timeout\n");
|
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
|
wi_init_locked(ifp->if_softc);
|
|
|
|
|
return;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
2006-12-11 00:41:22 +00:00
|
|
|
callout_reset(&sc->sc_watchdog, hz, wi_watchdog, sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2001-12-27 20:12:03 +00:00
|
|
|
static int
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_ioctl(struct ifnet *ifp, u_long cmd, caddr_t data)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
|
|
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
|
|
|
int error = 0, startall = 0;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
switch (cmd) {
|
|
|
|
|
case SIOCSIFFLAGS:
|
2008-05-01 04:55:00 +00:00
|
|
|
WI_LOCK(sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
/*
|
2003-01-15 20:11:31 +00:00
|
|
|
* Can't do promisc and hostap at the same time. If all that's
|
|
|
|
|
* changing is the promisc flag, try to short-circuit a call to
|
|
|
|
|
* wi_init() by just setting PROMISC in the hardware.
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
*/
|
2003-01-15 20:11:31 +00:00
|
|
|
if (ifp->if_flags & IFF_UP) {
|
|
|
|
|
if (ic->ic_opmode != IEEE80211_M_HOSTAP &&
|
2005-08-09 10:20:02 +00:00
|
|
|
ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
2008-04-20 20:35:46 +00:00
|
|
|
if ((ifp->if_flags ^ sc->sc_if_flags) & IFF_PROMISC) {
|
|
|
|
|
wi_write_val(sc, WI_RID_PROMISC,
|
|
|
|
|
(ifp->if_flags & IFF_PROMISC) != 0);
|
2003-01-15 20:11:31 +00:00
|
|
|
} else {
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_init_locked(sc);
|
|
|
|
|
startall = 1;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_init_locked(sc);
|
|
|
|
|
startall = 1;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
} else {
|
2008-04-20 20:35:46 +00:00
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
|
|
|
wi_stop_locked(sc, 1);
|
2003-12-02 04:59:59 +00:00
|
|
|
sc->wi_gone = 0;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
sc->sc_if_flags = ifp->if_flags;
|
2008-05-01 04:55:00 +00:00
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
if (startall)
|
|
|
|
|
ieee80211_start_all(ic);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
case SIOCGIFMEDIA:
|
|
|
|
|
error = ifmedia_ioctl(ifp, ifr, &ic->ic_media, cmd);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-05-01 04:55:00 +00:00
|
|
|
case SIOCGIFADDR:
|
2008-04-20 20:35:46 +00:00
|
|
|
error = ether_ioctl(ifp, cmd, data);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-05-01 04:55:00 +00:00
|
|
|
default:
|
|
|
|
|
error = EINVAL;
|
|
|
|
|
break;
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
return error;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2001-12-27 20:12:03 +00:00
|
|
|
static void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_media_status(struct ifnet *ifp, struct ifmediareq *imr)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211vap *vap = ifp->if_softc;
|
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
|
struct wi_softc *sc = ic->ic_ifp->if_softc;
|
2003-01-15 20:11:31 +00:00
|
|
|
u_int16_t val;
|
|
|
|
|
int rate, len;
|
|
|
|
|
|
|
|
|
|
len = sizeof(val);
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->sc_enabled &&
|
|
|
|
|
wi_read_rid(sc, WI_RID_CUR_TX_RATE, &val, &len) == 0 &&
|
2004-12-08 17:36:28 +00:00
|
|
|
len == sizeof(val)) {
|
2003-01-15 20:11:31 +00:00
|
|
|
/* convert to 802.11 rate */
|
2004-12-08 17:36:28 +00:00
|
|
|
val = le16toh(val);
|
2003-01-15 20:11:31 +00:00
|
|
|
rate = val * 2;
|
|
|
|
|
if (sc->sc_firmware_type == WI_LUCENT) {
|
2004-12-08 17:36:28 +00:00
|
|
|
if (rate == 10)
|
2003-01-15 20:11:31 +00:00
|
|
|
rate = 11; /* 5.5Mbps */
|
|
|
|
|
} else {
|
|
|
|
|
if (rate == 4*2)
|
|
|
|
|
rate = 11; /* 5.5Mbps */
|
|
|
|
|
else if (rate == 8*2)
|
|
|
|
|
rate = 22; /* 11Mbps */
|
|
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
vap->iv_bss->ni_txrate = rate;
|
2001-04-04 06:03:39 +00:00
|
|
|
}
|
2008-04-20 20:35:46 +00:00
|
|
|
ieee80211_media_status(ifp, imr);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static void
|
|
|
|
|
wi_sync_bssid(struct wi_softc *sc, u_int8_t new_bssid[IEEE80211_ADDR_LEN])
|
|
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
|
|
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
|
|
|
|
struct ieee80211_node *ni = vap->iv_bss;
|
2002-04-11 03:31:45 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (IEEE80211_ADDR_EQ(new_bssid, ni->ni_bssid))
|
2002-04-11 03:31:45 +00:00
|
|
|
return;
|
2001-04-10 05:29:26 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
DPRINTF(("wi_sync_bssid: bssid %s -> ", ether_sprintf(ni->ni_bssid)));
|
|
|
|
|
DPRINTF(("%s ?\n", ether_sprintf(new_bssid)));
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* In promiscuous mode, the BSSID field is not a reliable
|
|
|
|
|
* indicator of the firmware's BSSID. Damp spurious
|
|
|
|
|
* change-of-BSSID indications.
|
|
|
|
|
*/
|
|
|
|
|
if ((ifp->if_flags & IFF_PROMISC) != 0 &&
|
2004-12-08 17:36:28 +00:00
|
|
|
!ppsratecheck(&sc->sc_last_syn, &sc->sc_false_syns,
|
|
|
|
|
WI_MAX_FALSE_SYNS))
|
2003-01-15 20:11:31 +00:00
|
|
|
return;
|
2000-12-15 23:34:13 +00:00
|
|
|
|
2005-01-01 17:45:11 +00:00
|
|
|
sc->sc_false_syns = MAX(0, sc->sc_false_syns - 1);
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
#if 0
|
2005-01-01 17:45:11 +00:00
|
|
|
/*
|
|
|
|
|
* XXX hack; we should create a new node with the new bssid
|
2008-04-20 20:35:46 +00:00
|
|
|
* and replace the existing ic_bss with it but since we don't
|
|
|
|
|
* process management frames to collect state we cheat by
|
|
|
|
|
* reusing the existing node as we know wi_newstate will be
|
|
|
|
|
* called and it will overwrite the node state.
|
|
|
|
|
*/
|
|
|
|
|
ieee80211_sta_join(ic, ieee80211_ref_node(ni));
|
|
|
|
|
#endif
|
2003-06-27 00:49:04 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static __noinline void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_rx_intr(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_frame frmhdr;
|
|
|
|
|
struct mbuf *m;
|
|
|
|
|
struct ieee80211_frame *wh;
|
2003-08-19 22:17:04 +00:00
|
|
|
struct ieee80211_node *ni;
|
2009-05-20 20:00:40 +00:00
|
|
|
int fid, len, off;
|
2003-01-15 20:11:31 +00:00
|
|
|
u_int8_t dir;
|
|
|
|
|
u_int16_t status;
|
2009-05-20 20:00:40 +00:00
|
|
|
int8_t rssi, nf;
|
2003-01-15 20:11:31 +00:00
|
|
|
|
|
|
|
|
fid = CSR_READ_2(sc, WI_RX_FID);
|
|
|
|
|
|
|
|
|
|
/* First read in the frame header */
|
|
|
|
|
if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr))) {
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
|
DPRINTF(("wi_rx_intr: read fid %x failed\n", fid));
|
|
|
|
|
return;
|
2000-12-15 23:34:13 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
|
|
|
|
/*
|
2003-01-15 20:11:31 +00:00
|
|
|
* Drop undecryptable or packets with receive errors here
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
*/
|
2003-01-15 20:11:31 +00:00
|
|
|
status = le16toh(frmhdr.wi_status);
|
|
|
|
|
if (status & WI_STAT_ERRSTAT) {
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
|
DPRINTF(("wi_rx_intr: fid %x error status %x\n", fid, status));
|
|
|
|
|
return;
|
2000-12-15 23:34:13 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
len = le16toh(frmhdr.wi_dat_len);
|
|
|
|
|
off = ALIGN(sizeof(struct ieee80211_frame));
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-07-21 23:20:40 +00:00
|
|
|
/*
|
|
|
|
|
* Sometimes the PRISM2.x returns bogusly large frames. Except
|
|
|
|
|
* in monitor mode, just throw them away.
|
|
|
|
|
*/
|
|
|
|
|
if (off + len > MCLBYTES) {
|
|
|
|
|
if (ic->ic_opmode != IEEE80211_M_MONITOR) {
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
|
DPRINTF(("wi_rx_intr: oversized packet\n"));
|
|
|
|
|
return;
|
|
|
|
|
} else
|
|
|
|
|
len = 0;
|
|
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
if (off + len > MHLEN)
|
|
|
|
|
m = m_getcl(M_DONTWAIT, MT_DATA, M_PKTHDR);
|
|
|
|
|
else
|
|
|
|
|
m = m_gethdr(M_DONTWAIT, MT_DATA);
|
2003-01-15 20:11:31 +00:00
|
|
|
if (m == NULL) {
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
|
ifp->if_ierrors++;
|
|
|
|
|
DPRINTF(("wi_rx_intr: MGET failed\n"));
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
m->m_data += off - sizeof(struct ieee80211_frame);
|
|
|
|
|
memcpy(m->m_data, &frmhdr.wi_whdr, sizeof(struct ieee80211_frame));
|
|
|
|
|
wi_read_bap(sc, fid, sizeof(frmhdr),
|
|
|
|
|
m->m_data + sizeof(struct ieee80211_frame), len);
|
|
|
|
|
m->m_pkthdr.len = m->m_len = sizeof(struct ieee80211_frame) + len;
|
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
|
|
|
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_RX);
|
|
|
|
|
|
2009-05-20 20:00:40 +00:00
|
|
|
rssi = frmhdr.wi_rx_signal;
|
|
|
|
|
nf = frmhdr.wi_rx_silence;
|
|
|
|
|
if (ieee80211_radiotap_active(ic)) {
|
|
|
|
|
struct wi_rx_radiotap_header *tap = &sc->sc_rx_th;
|
|
|
|
|
uint32_t rstamp;
|
|
|
|
|
|
|
|
|
|
rstamp = (le16toh(frmhdr.wi_rx_tstamp0) << 16) |
|
|
|
|
|
le16toh(frmhdr.wi_rx_tstamp1);
|
2009-05-21 04:00:31 +00:00
|
|
|
tap->wr_tsf = htole64((uint64_t)rstamp);
|
2003-12-28 06:58:52 +00:00
|
|
|
/* XXX replace divide by table */
|
2009-05-20 20:00:40 +00:00
|
|
|
tap->wr_rate = frmhdr.wi_rx_rate / 5;
|
|
|
|
|
tap->wr_flags = 0;
|
2003-12-28 06:58:52 +00:00
|
|
|
if (frmhdr.wi_status & WI_STAT_PCF)
|
2009-05-20 20:00:40 +00:00
|
|
|
tap->wr_flags |= IEEE80211_RADIOTAP_F_CFP;
|
2008-04-20 20:35:46 +00:00
|
|
|
if (m->m_flags & M_WEP)
|
2009-05-20 20:00:40 +00:00
|
|
|
tap->wr_flags |= IEEE80211_RADIOTAP_F_WEP;
|
|
|
|
|
tap->wr_antsignal = rssi;
|
|
|
|
|
tap->wr_antnoise = nf;
|
2006-08-05 04:58:25 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* synchronize driver's BSSID with firmware's BSSID */
|
2008-04-20 20:35:46 +00:00
|
|
|
wh = mtod(m, struct ieee80211_frame *);
|
2003-01-15 20:11:31 +00:00
|
|
|
dir = wh->i_fc[1] & IEEE80211_FC1_DIR_MASK;
|
|
|
|
|
if (ic->ic_opmode == IEEE80211_M_IBSS && dir == IEEE80211_FC1_DIR_NODS)
|
|
|
|
|
wi_sync_bssid(sc, wh->i_addr3);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2006-12-11 00:37:12 +00:00
|
|
|
WI_UNLOCK(sc);
|
2008-04-20 20:35:46 +00:00
|
|
|
|
|
|
|
|
ni = ieee80211_find_rxnode(ic, mtod(m, struct ieee80211_frame_min *));
|
|
|
|
|
if (ni != NULL) {
|
2009-05-20 20:00:40 +00:00
|
|
|
(void) ieee80211_input(ni, m, rssi, nf);
|
2008-04-20 20:35:46 +00:00
|
|
|
ieee80211_free_node(ni);
|
|
|
|
|
} else
|
2009-05-20 20:00:40 +00:00
|
|
|
(void) ieee80211_input_all(ic, m, rssi, nf);
|
2006-12-11 00:37:12 +00:00
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static __noinline void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_tx_ex_intr(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_frame frmhdr;
|
|
|
|
|
int fid;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
fid = CSR_READ_2(sc, WI_TX_CMP_FID);
|
|
|
|
|
/* Read in the frame header */
|
|
|
|
|
if (wi_read_bap(sc, fid, 0, &frmhdr, sizeof(frmhdr)) == 0) {
|
|
|
|
|
u_int16_t status = le16toh(frmhdr.wi_status);
|
|
|
|
|
/*
|
|
|
|
|
* Spontaneous station disconnects appear as xmit
|
|
|
|
|
* errors. Don't announce them and/or count them
|
|
|
|
|
* as an output error.
|
|
|
|
|
*/
|
|
|
|
|
if ((status & WI_TXSTAT_DISCONNECT) == 0) {
|
|
|
|
|
if (ppsratecheck(&lasttxerror, &curtxeps, wi_txerate)) {
|
|
|
|
|
if_printf(ifp, "tx failed");
|
|
|
|
|
if (status & WI_TXSTAT_RET_ERR)
|
|
|
|
|
printf(", retry limit exceeded");
|
|
|
|
|
if (status & WI_TXSTAT_AGED_ERR)
|
|
|
|
|
printf(", max transmit lifetime exceeded");
|
|
|
|
|
if (status & WI_TXSTAT_DISCONNECT)
|
|
|
|
|
printf(", port disconnected");
|
|
|
|
|
if (status & WI_TXSTAT_FORM_ERR)
|
|
|
|
|
printf(", invalid format (data len %u src %6D)",
|
|
|
|
|
le16toh(frmhdr.wi_dat_len),
|
|
|
|
|
frmhdr.wi_ehdr.ether_shost, ":");
|
|
|
|
|
if (status & ~0xf)
|
|
|
|
|
printf(", status=0x%x", status);
|
|
|
|
|
printf("\n");
|
|
|
|
|
}
|
|
|
|
|
ifp->if_oerrors++;
|
|
|
|
|
} else {
|
|
|
|
|
DPRINTF(("port disconnected\n"));
|
|
|
|
|
ifp->if_collisions++; /* XXX */
|
|
|
|
|
}
|
|
|
|
|
} else
|
|
|
|
|
DPRINTF(("wi_tx_ex_intr: read fid %x failed\n", fid));
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_TX_EXC);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static __noinline void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_tx_intr(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2003-01-15 20:11:31 +00:00
|
|
|
int fid, cur;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-12-02 04:59:59 +00:00
|
|
|
if (sc->wi_gone)
|
|
|
|
|
return;
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
fid = CSR_READ_2(sc, WI_ALLOC_FID);
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
cur = sc->sc_txcur;
|
|
|
|
|
if (sc->sc_txd[cur].d_fid != fid) {
|
|
|
|
|
if_printf(ifp, "bad alloc %x != %x, cur %d nxt %d\n",
|
|
|
|
|
fid, sc->sc_txd[cur].d_fid, cur, sc->sc_txnext);
|
|
|
|
|
return;
|
|
|
|
|
}
|
|
|
|
|
sc->sc_tx_timer = 0;
|
|
|
|
|
sc->sc_txd[cur].d_len = 0;
|
2003-03-18 04:22:42 +00:00
|
|
|
sc->sc_txcur = cur = (cur + 1) % sc->sc_ntxbuf;
|
2003-01-15 20:11:31 +00:00
|
|
|
if (sc->sc_txd[cur].d_len == 0)
|
2005-08-09 10:20:02 +00:00
|
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
2003-01-15 20:11:31 +00:00
|
|
|
else {
|
|
|
|
|
if (wi_cmd(sc, WI_CMD_TX | WI_RECLAIM, sc->sc_txd[cur].d_fid,
|
|
|
|
|
0, 0)) {
|
|
|
|
|
if_printf(ifp, "xmit failed\n");
|
|
|
|
|
sc->sc_txd[cur].d_len = 0;
|
|
|
|
|
} else {
|
|
|
|
|
sc->sc_tx_timer = 5;
|
|
|
|
|
}
|
2001-03-27 05:03:49 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static __noinline void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_info_intr(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2008-04-20 20:35:46 +00:00
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
|
|
|
|
struct ieee80211vap *vap = TAILQ_FIRST(&ic->ic_vaps);
|
2003-01-15 20:11:31 +00:00
|
|
|
int i, fid, len, off;
|
|
|
|
|
u_int16_t ltbuf[2];
|
|
|
|
|
u_int16_t stat;
|
|
|
|
|
u_int32_t *ptr;
|
|
|
|
|
|
|
|
|
|
fid = CSR_READ_2(sc, WI_INFO_FID);
|
|
|
|
|
wi_read_bap(sc, fid, 0, ltbuf, sizeof(ltbuf));
|
|
|
|
|
|
|
|
|
|
switch (le16toh(ltbuf[1])) {
|
|
|
|
|
case WI_INFO_LINK_STAT:
|
|
|
|
|
wi_read_bap(sc, fid, sizeof(ltbuf), &stat, sizeof(stat));
|
|
|
|
|
DPRINTF(("wi_info_intr: LINK_STAT 0x%x\n", le16toh(stat)));
|
|
|
|
|
switch (le16toh(stat)) {
|
|
|
|
|
case WI_INFO_LINK_STAT_CONNECTED:
|
2008-04-20 20:35:46 +00:00
|
|
|
if (vap->iv_state == IEEE80211_S_RUN &&
|
|
|
|
|
vap->iv_opmode != IEEE80211_M_IBSS)
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
/* fall thru... */
|
2003-01-15 20:11:31 +00:00
|
|
|
case WI_INFO_LINK_STAT_AP_CHG:
|
2009-05-02 15:14:18 +00:00
|
|
|
IEEE80211_LOCK(ic);
|
|
|
|
|
vap->iv_bss->ni_associd = 1 | 0xc000; /* NB: anything will do */
|
|
|
|
|
ieee80211_new_state(vap, IEEE80211_S_RUN, 0);
|
|
|
|
|
IEEE80211_UNLOCK(ic);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
break;
|
2003-01-15 20:11:31 +00:00
|
|
|
case WI_INFO_LINK_STAT_AP_INR:
|
2008-04-20 20:35:46 +00:00
|
|
|
break;
|
|
|
|
|
case WI_INFO_LINK_STAT_DISCONNECTED:
|
|
|
|
|
/* we dropped off the net; e.g. due to deauth/disassoc */
|
2009-05-02 15:14:18 +00:00
|
|
|
IEEE80211_LOCK(ic);
|
|
|
|
|
vap->iv_bss->ni_associd = 0;
|
|
|
|
|
vap->iv_stats.is_rx_deauth++;
|
|
|
|
|
ieee80211_new_state(vap, IEEE80211_S_SCAN, 0);
|
|
|
|
|
IEEE80211_UNLOCK(ic);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
|
|
|
|
case WI_INFO_LINK_STAT_AP_OOR:
|
2008-04-20 20:35:46 +00:00
|
|
|
/* XXX does this need to be per-vap? */
|
2009-05-02 15:14:18 +00:00
|
|
|
ieee80211_beacon_miss(ic);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
|
|
|
|
case WI_INFO_LINK_STAT_ASSOC_FAILED:
|
2008-04-20 20:35:46 +00:00
|
|
|
if (vap->iv_opmode == IEEE80211_M_STA)
|
2009-05-02 15:14:18 +00:00
|
|
|
ieee80211_new_state(vap, IEEE80211_S_SCAN,
|
|
|
|
|
IEEE80211_SCAN_FAIL_TIMEOUT);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
case WI_INFO_COUNTERS:
|
|
|
|
|
/* some card versions have a larger stats structure */
|
|
|
|
|
len = min(le16toh(ltbuf[0]) - 1, sizeof(sc->sc_stats) / 4);
|
|
|
|
|
ptr = (u_int32_t *)&sc->sc_stats;
|
|
|
|
|
off = sizeof(ltbuf);
|
|
|
|
|
for (i = 0; i < len; i++, off += 2, ptr++) {
|
|
|
|
|
wi_read_bap(sc, fid, off, &stat, sizeof(stat));
|
|
|
|
|
#ifdef WI_HERMES_STATS_WAR
|
|
|
|
|
if (stat & 0xf000)
|
|
|
|
|
stat = ~stat;
|
|
|
|
|
#endif
|
|
|
|
|
*ptr += stat;
|
|
|
|
|
}
|
|
|
|
|
ifp->if_collisions = sc->sc_stats.wi_tx_single_retries +
|
|
|
|
|
sc->sc_stats.wi_tx_multi_retries +
|
|
|
|
|
sc->sc_stats.wi_tx_retry_limit;
|
|
|
|
|
break;
|
|
|
|
|
default:
|
|
|
|
|
DPRINTF(("wi_info_intr: got fid %x type %x len %d\n", fid,
|
|
|
|
|
le16toh(ltbuf[1]), le16toh(ltbuf[0])));
|
|
|
|
|
break;
|
2001-04-10 05:29:26 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_INFO);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_write_multi(struct wi_softc *sc)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2005-06-10 16:49:24 +00:00
|
|
|
struct ifnet *ifp = sc->sc_ifp;
|
2003-01-15 20:11:31 +00:00
|
|
|
int n;
|
|
|
|
|
struct ifmultiaddr *ifma;
|
|
|
|
|
struct wi_mcast mlist;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
2003-01-15 20:11:31 +00:00
|
|
|
allmulti:
|
|
|
|
|
memset(&mlist, 0, sizeof(mlist));
|
|
|
|
|
return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
|
|
|
|
|
sizeof(mlist));
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
n = 0;
|
2009-06-26 11:45:06 +00:00
|
|
|
if_maddr_rlock(ifp);
|
2001-02-06 10:12:15 +00:00
|
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
|
|
|
continue;
|
2003-01-15 20:11:31 +00:00
|
|
|
if (n >= 16)
|
|
|
|
|
goto allmulti;
|
|
|
|
|
IEEE80211_ADDR_COPY(&mlist.wi_mcast[n],
|
|
|
|
|
(LLADDR((struct sockaddr_dl *)ifma->ifma_addr)));
|
|
|
|
|
n++;
|
|
|
|
|
}
|
2009-06-26 11:45:06 +00:00
|
|
|
if_maddr_runlock(ifp);
|
2003-01-15 20:11:31 +00:00
|
|
|
return wi_write_rid(sc, WI_RID_MCAST_LIST, &mlist,
|
|
|
|
|
IEEE80211_ADDR_LEN * n);
|
|
|
|
|
}
|
|
|
|
|
|
2008-04-20 20:35:46 +00:00
|
|
|
static void
|
|
|
|
|
wi_update_mcast(struct ifnet *ifp)
|
|
|
|
|
{
|
|
|
|
|
wi_write_multi(ifp->if_softc);
|
|
|
|
|
}
|
|
|
|
|
|
2009-05-20 20:00:40 +00:00
|
|
|
static void
|
|
|
|
|
wi_update_promisc(struct ifnet *ifp)
|
|
|
|
|
{
|
|
|
|
|
struct wi_softc *sc = ifp->if_softc;
|
|
|
|
|
struct ieee80211com *ic = ifp->if_l2com;
|
|
|
|
|
|
|
|
|
|
WI_LOCK(sc);
|
|
|
|
|
/* XXX handle WEP special case handling? */
|
|
|
|
|
wi_write_val(sc, WI_RID_PROMISC,
|
|
|
|
|
(ic->ic_opmode == IEEE80211_M_MONITOR ||
|
|
|
|
|
(ifp->if_flags & IFF_PROMISC)));
|
|
|
|
|
WI_UNLOCK(sc);
|
|
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static void
|
|
|
|
|
wi_read_nicid(struct wi_softc *sc)
|
|
|
|
|
{
|
|
|
|
|
struct wi_card_ident *id;
|
|
|
|
|
char *p;
|
|
|
|
|
int len;
|
|
|
|
|
u_int16_t ver[4];
|
|
|
|
|
|
|
|
|
|
/* getting chip identity */
|
|
|
|
|
memset(ver, 0, sizeof(ver));
|
|
|
|
|
len = sizeof(ver);
|
|
|
|
|
wi_read_rid(sc, WI_RID_CARD_ID, ver, &len);
|
|
|
|
|
|
|
|
|
|
sc->sc_firmware_type = WI_NOTYPE;
|
2008-07-28 17:00:37 +00:00
|
|
|
sc->sc_nic_id = le16toh(ver[0]);
|
2003-01-15 20:11:31 +00:00
|
|
|
for (id = wi_card_ident; id->card_name != NULL; id++) {
|
2008-07-28 17:00:37 +00:00
|
|
|
if (sc->sc_nic_id == id->card_id) {
|
|
|
|
|
sc->sc_nic_name = id->card_name;
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_firmware_type = id->firm_type;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
if (sc->sc_firmware_type == WI_NOTYPE) {
|
2008-07-28 17:00:37 +00:00
|
|
|
if (sc->sc_nic_id & 0x8000) {
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_firmware_type = WI_INTERSIL;
|
2008-07-28 17:00:37 +00:00
|
|
|
sc->sc_nic_name = "Unknown Prism chip";
|
2003-01-15 20:11:31 +00:00
|
|
|
} else {
|
|
|
|
|
sc->sc_firmware_type = WI_LUCENT;
|
2008-07-28 17:00:37 +00:00
|
|
|
sc->sc_nic_name = "Unknown Lucent chip";
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
}
|
2008-08-02 20:49:01 +00:00
|
|
|
if (bootverbose)
|
|
|
|
|
device_printf(sc->sc_dev, "using %s\n", sc->sc_nic_name);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* get primary firmware version (Only Prism chips) */
|
|
|
|
|
if (sc->sc_firmware_type != WI_LUCENT) {
|
|
|
|
|
memset(ver, 0, sizeof(ver));
|
|
|
|
|
len = sizeof(ver);
|
|
|
|
|
wi_read_rid(sc, WI_RID_PRI_IDENTITY, ver, &len);
|
|
|
|
|
sc->sc_pri_firmware_ver = le16toh(ver[2]) * 10000 +
|
|
|
|
|
le16toh(ver[3]) * 100 + le16toh(ver[1]);
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* get station firmware version */
|
|
|
|
|
memset(ver, 0, sizeof(ver));
|
|
|
|
|
len = sizeof(ver);
|
|
|
|
|
wi_read_rid(sc, WI_RID_STA_IDENTITY, ver, &len);
|
|
|
|
|
sc->sc_sta_firmware_ver = le16toh(ver[2]) * 10000 +
|
|
|
|
|
le16toh(ver[3]) * 100 + le16toh(ver[1]);
|
|
|
|
|
if (sc->sc_firmware_type == WI_INTERSIL &&
|
|
|
|
|
(sc->sc_sta_firmware_ver == 10102 ||
|
|
|
|
|
sc->sc_sta_firmware_ver == 20102)) {
|
|
|
|
|
char ident[12];
|
|
|
|
|
memset(ident, 0, sizeof(ident));
|
|
|
|
|
len = sizeof(ident);
|
|
|
|
|
/* value should be the format like "V2.00-11" */
|
|
|
|
|
if (wi_read_rid(sc, WI_RID_SYMBOL_IDENTITY, ident, &len) == 0 &&
|
|
|
|
|
*(p = (char *)ident) >= 'A' &&
|
|
|
|
|
p[2] == '.' && p[5] == '-' && p[8] == '\0') {
|
|
|
|
|
sc->sc_firmware_type = WI_SYMBOL;
|
|
|
|
|
sc->sc_sta_firmware_ver = (p[1] - '0') * 10000 +
|
|
|
|
|
(p[3] - '0') * 1000 + (p[4] - '0') * 100 +
|
|
|
|
|
(p[6] - '0') * 10 + (p[7] - '0');
|
|
|
|
|
}
|
|
|
|
|
}
|
2008-07-28 17:00:37 +00:00
|
|
|
if (bootverbose) {
|
|
|
|
|
device_printf(sc->sc_dev, "%s Firmware: ",
|
|
|
|
|
wi_firmware_names[sc->sc_firmware_type]);
|
|
|
|
|
if (sc->sc_firmware_type != WI_LUCENT) /* XXX */
|
|
|
|
|
printf("Primary (%u.%u.%u), ",
|
|
|
|
|
sc->sc_pri_firmware_ver / 10000,
|
|
|
|
|
(sc->sc_pri_firmware_ver % 10000) / 100,
|
|
|
|
|
sc->sc_pri_firmware_ver % 100);
|
|
|
|
|
printf("Station (%u.%u.%u)\n",
|
|
|
|
|
sc->sc_sta_firmware_ver / 10000,
|
|
|
|
|
(sc->sc_sta_firmware_ver % 10000) / 100,
|
|
|
|
|
sc->sc_sta_firmware_ver % 100);
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_write_ssid(struct wi_softc *sc, int rid, u_int8_t *buf, int buflen)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_ssid ssid;
|
|
|
|
|
|
|
|
|
|
if (buflen > IEEE80211_NWID_LEN)
|
|
|
|
|
return ENOBUFS;
|
|
|
|
|
memset(&ssid, 0, sizeof(ssid));
|
2008-04-20 20:35:46 +00:00
|
|
|
ssid.wi_len = htole16(buflen);
|
|
|
|
|
memcpy(ssid.wi_ssid, buf, buflen);
|
|
|
|
|
return wi_write_rid(sc, rid, &ssid, sizeof(ssid));
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2002-04-11 07:21:16 +00:00
|
|
|
|
2005-10-02 04:29:08 +00:00
|
|
|
static int
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_txrate(struct wi_softc *sc, struct ieee80211vap *vap)
|
2005-10-02 04:29:08 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
static const uint16_t lucent_rates[12] = {
|
|
|
|
|
[ 0] = 3, /* auto */
|
|
|
|
|
[ 1] = 1, /* 1Mb/s */
|
|
|
|
|
[ 2] = 2, /* 2Mb/s */
|
|
|
|
|
[ 5] = 4, /* 5.5Mb/s */
|
|
|
|
|
[11] = 5 /* 11Mb/s */
|
|
|
|
|
};
|
|
|
|
|
static const uint16_t intersil_rates[12] = {
|
|
|
|
|
[ 0] = 0xf, /* auto */
|
|
|
|
|
[ 1] = 0, /* 1Mb/s */
|
|
|
|
|
[ 2] = 1, /* 2Mb/s */
|
|
|
|
|
[ 5] = 2, /* 5.5Mb/s */
|
|
|
|
|
[11] = 3, /* 11Mb/s */
|
|
|
|
|
};
|
|
|
|
|
const uint16_t *rates = sc->sc_firmware_type == WI_LUCENT ?
|
|
|
|
|
lucent_rates : intersil_rates;
|
|
|
|
|
struct ieee80211com *ic = vap->iv_ic;
|
|
|
|
|
const struct ieee80211_txparam *tp;
|
|
|
|
|
|
|
|
|
|
tp = &vap->iv_txparms[ieee80211_chan2mode(ic->ic_bsschan)];
|
|
|
|
|
return wi_write_val(sc, WI_RID_TX_RATE,
|
|
|
|
|
(tp->ucastrate == IEEE80211_FIXED_RATE_NONE ?
|
|
|
|
|
rates[0] : rates[tp->ucastrate / 2]));
|
2005-10-02 04:29:08 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_wep(struct wi_softc *sc, struct ieee80211vap *vap)
|
2003-01-15 20:11:31 +00:00
|
|
|
{
|
|
|
|
|
int error = 0;
|
|
|
|
|
int i, keylen;
|
|
|
|
|
u_int16_t val;
|
|
|
|
|
struct wi_key wkey[IEEE80211_WEP_NKID];
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
switch (sc->sc_firmware_type) {
|
|
|
|
|
case WI_LUCENT:
|
2008-04-20 20:35:46 +00:00
|
|
|
val = (vap->iv_flags & IEEE80211_F_PRIVACY) ? 1 : 0;
|
2003-01-15 20:11:31 +00:00
|
|
|
error = wi_write_val(sc, WI_RID_ENCRYPTION, val);
|
|
|
|
|
if (error)
|
|
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
if ((vap->iv_flags & IEEE80211_F_PRIVACY) == 0)
|
2004-12-17 20:48:13 +00:00
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
error = wi_write_val(sc, WI_RID_TX_CRYPT_KEY, vap->iv_def_txkey);
|
2004-12-17 20:48:13 +00:00
|
|
|
if (error)
|
|
|
|
|
break;
|
|
|
|
|
memset(wkey, 0, sizeof(wkey));
|
|
|
|
|
for (i = 0; i < IEEE80211_WEP_NKID; i++) {
|
2008-04-20 20:35:46 +00:00
|
|
|
keylen = vap->iv_nw_keys[i].wk_keylen;
|
2004-12-17 20:48:13 +00:00
|
|
|
wkey[i].wi_keylen = htole16(keylen);
|
2008-04-20 20:35:46 +00:00
|
|
|
memcpy(wkey[i].wi_keydat, vap->iv_nw_keys[i].wk_key,
|
2004-12-17 20:48:13 +00:00
|
|
|
keylen);
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
2004-12-17 20:48:13 +00:00
|
|
|
error = wi_write_rid(sc, WI_RID_DEFLT_CRYPT_KEYS,
|
|
|
|
|
wkey, sizeof(wkey));
|
2005-10-02 04:29:08 +00:00
|
|
|
sc->sc_encryption = 0;
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2002-07-29 15:36:22 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
case WI_INTERSIL:
|
2008-04-20 20:35:46 +00:00
|
|
|
val = HOST_ENCRYPT | HOST_DECRYPT;
|
|
|
|
|
if (vap->iv_flags & IEEE80211_F_PRIVACY) {
|
2002-03-05 16:18:14 +00:00
|
|
|
/*
|
|
|
|
|
* ONLY HWB3163 EVAL-CARD Firmware version
|
2002-04-03 19:44:17 +00:00
|
|
|
* less than 0.8 variant2
|
2002-03-05 16:18:14 +00:00
|
|
|
*
|
2003-01-15 20:11:31 +00:00
|
|
|
* If promiscuous mode disable, Prism2 chip
|
|
|
|
|
* does not work with WEP .
|
2002-03-05 16:18:14 +00:00
|
|
|
* It is under investigation for details.
|
|
|
|
|
* (ichiro@netbsd.org)
|
|
|
|
|
*/
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->sc_sta_firmware_ver < 802 ) {
|
2002-04-03 19:44:17 +00:00
|
|
|
/* firm ver < 0.8 variant 2 */
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_write_val(sc, WI_RID_PROMISC, 1);
|
2002-03-05 16:18:14 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_write_val(sc, WI_RID_CNFAUTHMODE,
|
2008-04-20 20:35:46 +00:00
|
|
|
vap->iv_bss->ni_authmode);
|
|
|
|
|
val |= PRIVACY_INVOKED;
|
2003-01-15 20:11:31 +00:00
|
|
|
} else {
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_val(sc, WI_RID_CNFAUTHMODE, IEEE80211_AUTH_OPEN);
|
2002-03-05 16:18:14 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
error = wi_write_val(sc, WI_RID_P2_ENCRYPTION, val);
|
|
|
|
|
if (error)
|
|
|
|
|
break;
|
2005-10-02 04:29:08 +00:00
|
|
|
sc->sc_encryption = val;
|
2004-12-17 20:48:13 +00:00
|
|
|
if ((val & PRIVACY_INVOKED) == 0)
|
|
|
|
|
break;
|
2008-04-20 20:35:46 +00:00
|
|
|
error = wi_write_val(sc, WI_RID_P2_TX_CRYPT_KEY, vap->iv_def_txkey);
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2000-02-02 17:59:13 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
return error;
|
|
|
|
|
}
|
2000-02-02 17:59:13 +00:00
|
|
|
|
2009-05-20 22:28:55 +00:00
|
|
|
static int
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_cmd(struct wi_softc *sc, int cmd, int val0, int val1, int val2)
|
|
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
int i, s = 0;
|
|
|
|
|
|
2003-12-02 04:59:59 +00:00
|
|
|
if (sc->wi_gone)
|
|
|
|
|
return (ENODEV);
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* wait for the busy bit to clear */
|
2003-12-09 07:41:07 +00:00
|
|
|
for (i = sc->wi_cmd_count; i > 0; i--) { /* 500ms */
|
2003-06-11 16:51:27 +00:00
|
|
|
if (!(CSR_READ_2(sc, WI_COMMAND) & WI_CMD_BUSY))
|
2003-01-15 20:11:31 +00:00
|
|
|
break;
|
2003-12-02 04:59:59 +00:00
|
|
|
DELAY(1*1000); /* 1ms */
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
if (i == 0) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: busy bit won't clear, cmd 0x%x\n",
|
|
|
|
|
__func__, cmd);
|
2003-12-02 04:59:59 +00:00
|
|
|
sc->wi_gone = 1;
|
2003-01-15 20:11:31 +00:00
|
|
|
return(ETIMEDOUT);
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
CSR_WRITE_2(sc, WI_PARAM0, val0);
|
|
|
|
|
CSR_WRITE_2(sc, WI_PARAM1, val1);
|
|
|
|
|
CSR_WRITE_2(sc, WI_PARAM2, val2);
|
|
|
|
|
CSR_WRITE_2(sc, WI_COMMAND, cmd);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (cmd == WI_CMD_INI) {
|
|
|
|
|
/* XXX: should sleep here. */
|
2003-06-11 16:51:27 +00:00
|
|
|
DELAY(100*1000); /* 100ms delay for init */
|
2003-01-15 20:11:31 +00:00
|
|
|
}
|
|
|
|
|
for (i = 0; i < WI_TIMEOUT; i++) {
|
|
|
|
|
/*
|
|
|
|
|
* Wait for 'command complete' bit to be
|
|
|
|
|
* set in the event status register.
|
|
|
|
|
*/
|
|
|
|
|
s = CSR_READ_2(sc, WI_EVENT_STAT);
|
|
|
|
|
if (s & WI_EV_CMD) {
|
|
|
|
|
/* Ack the event and read result code. */
|
|
|
|
|
s = CSR_READ_2(sc, WI_STATUS);
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_CMD);
|
|
|
|
|
if (s & WI_STAT_CMD_RESULT) {
|
|
|
|
|
return(EIO);
|
|
|
|
|
}
|
|
|
|
|
break;
|
|
|
|
|
}
|
|
|
|
|
DELAY(WI_DELAY);
|
|
|
|
|
}
|
2002-04-11 07:21:16 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (i == WI_TIMEOUT) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: timeout on cmd 0x%04x; "
|
|
|
|
|
"event status 0x%04x\n", __func__, cmd, s);
|
2003-12-02 04:59:59 +00:00
|
|
|
if (s == 0xffff)
|
|
|
|
|
sc->wi_gone = 1;
|
2003-01-15 20:11:31 +00:00
|
|
|
return(ETIMEDOUT);
|
2002-04-11 07:21:16 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
return (0);
|
2002-04-11 07:21:16 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_seek_bap(struct wi_softc *sc, int id, int off)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
int i, status;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
CSR_WRITE_2(sc, WI_SEL0, id);
|
|
|
|
|
CSR_WRITE_2(sc, WI_OFF0, off);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
for (i = 0; ; i++) {
|
|
|
|
|
status = CSR_READ_2(sc, WI_OFF0);
|
|
|
|
|
if ((status & WI_OFF_BUSY) == 0)
|
|
|
|
|
break;
|
|
|
|
|
if (i == WI_TIMEOUT) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: timeout, id %x off %x\n",
|
|
|
|
|
__func__, id, off);
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
|
2003-12-02 04:59:59 +00:00
|
|
|
if (status == 0xffff)
|
|
|
|
|
sc->wi_gone = 1;
|
2003-01-15 20:11:31 +00:00
|
|
|
return ETIMEDOUT;
|
|
|
|
|
}
|
|
|
|
|
DELAY(1);
|
2000-10-13 20:33:24 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
if (status & WI_OFF_ERR) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: error, id %x off %x\n",
|
|
|
|
|
__func__, id, off);
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_bap_off = WI_OFF_ERR; /* invalidate */
|
|
|
|
|
return EIO;
|
2000-10-13 20:33:24 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_bap_id = id;
|
|
|
|
|
sc->sc_bap_off = off;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_read_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
|
|
|
|
|
{
|
|
|
|
|
u_int16_t *ptr;
|
|
|
|
|
int i, error, cnt;
|
|
|
|
|
|
|
|
|
|
if (buflen == 0)
|
|
|
|
|
return 0;
|
|
|
|
|
if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
|
|
|
|
|
if ((error = wi_seek_bap(sc, id, off)) != 0)
|
|
|
|
|
return error;
|
2000-10-13 20:33:24 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
cnt = (buflen + 1) / 2;
|
|
|
|
|
ptr = (u_int16_t *)buf;
|
|
|
|
|
for (i = 0; i < cnt; i++)
|
|
|
|
|
*ptr++ = CSR_READ_2(sc, WI_DATA0);
|
|
|
|
|
sc->sc_bap_off += cnt * 2;
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
|
|
|
|
|
|
|
|
|
static int
|
|
|
|
|
wi_write_bap(struct wi_softc *sc, int id, int off, void *buf, int buflen)
|
|
|
|
|
{
|
|
|
|
|
u_int16_t *ptr;
|
|
|
|
|
int i, error, cnt;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (buflen == 0)
|
|
|
|
|
return 0;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (id != sc->sc_bap_id || off != sc->sc_bap_off) {
|
|
|
|
|
if ((error = wi_seek_bap(sc, id, off)) != 0)
|
|
|
|
|
return error;
|
2002-04-11 07:21:16 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
cnt = (buflen + 1) / 2;
|
|
|
|
|
ptr = (u_int16_t *)buf;
|
|
|
|
|
for (i = 0; i < cnt; i++)
|
|
|
|
|
CSR_WRITE_2(sc, WI_DATA0, ptr[i]);
|
|
|
|
|
sc->sc_bap_off += cnt * 2;
|
|
|
|
|
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_mwrite_bap(struct wi_softc *sc, int id, int off, struct mbuf *m0, int totlen)
|
|
|
|
|
{
|
|
|
|
|
int error, len;
|
|
|
|
|
struct mbuf *m;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
for (m = m0; m != NULL && totlen > 0; m = m->m_next) {
|
|
|
|
|
if (m->m_len == 0)
|
|
|
|
|
continue;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
len = min(m->m_len, totlen);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (((u_long)m->m_data) % 2 != 0 || len % 2 != 0) {
|
|
|
|
|
m_copydata(m, 0, totlen, (caddr_t)&sc->sc_txbuf);
|
|
|
|
|
return wi_write_bap(sc, id, off, (caddr_t)&sc->sc_txbuf,
|
|
|
|
|
totlen);
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if ((error = wi_write_bap(sc, id, off, m->m_data, len)) != 0)
|
|
|
|
|
return error;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
off += m->m_len;
|
|
|
|
|
totlen -= len;
|
|
|
|
|
}
|
|
|
|
|
return 0;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_alloc_fid(struct wi_softc *sc, int len, int *idp)
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
int i;
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
if (wi_cmd(sc, WI_CMD_ALLOC_MEM, len, 0, 0)) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: failed to allocate %d bytes on NIC\n",
|
|
|
|
|
__func__, len);
|
2003-01-15 20:11:31 +00:00
|
|
|
return ENOMEM;
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
for (i = 0; i < WI_TIMEOUT; i++) {
|
|
|
|
|
if (CSR_READ_2(sc, WI_EVENT_STAT) & WI_EV_ALLOC)
|
|
|
|
|
break;
|
|
|
|
|
DELAY(1);
|
|
|
|
|
}
|
2005-03-26 23:43:54 +00:00
|
|
|
if (i == WI_TIMEOUT) {
|
2008-04-20 20:35:46 +00:00
|
|
|
device_printf(sc->sc_dev, "%s: timeout in alloc\n", __func__);
|
2005-03-26 23:43:54 +00:00
|
|
|
return ETIMEDOUT;
|
|
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
*idp = CSR_READ_2(sc, WI_ALLOC_FID);
|
|
|
|
|
CSR_WRITE_2(sc, WI_EVENT_ACK, WI_EV_ALLOC);
|
|
|
|
|
return 0;
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_read_rid(struct wi_softc *sc, int rid, void *buf, int *buflenp)
|
|
|
|
|
{
|
|
|
|
|
int error, len;
|
|
|
|
|
u_int16_t ltbuf[2];
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
/* Tell the NIC to enter record read mode. */
|
|
|
|
|
error = wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_READ, rid, 0, 0);
|
|
|
|
|
if (error)
|
|
|
|
|
return error;
|
|
|
|
|
|
|
|
|
|
error = wi_read_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
|
|
|
|
|
if (error)
|
|
|
|
|
return error;
|
|
|
|
|
|
|
|
|
|
if (le16toh(ltbuf[1]) != rid) {
|
|
|
|
|
device_printf(sc->sc_dev, "record read mismatch, rid=%x, got=%x\n",
|
|
|
|
|
rid, le16toh(ltbuf[1]));
|
|
|
|
|
return EIO;
|
|
|
|
|
}
|
|
|
|
|
len = (le16toh(ltbuf[0]) - 1) * 2; /* already got rid */
|
|
|
|
|
if (*buflenp < len) {
|
|
|
|
|
device_printf(sc->sc_dev, "record buffer is too small, "
|
|
|
|
|
"rid=%x, size=%d, len=%d\n",
|
|
|
|
|
rid, *buflenp, len);
|
|
|
|
|
return ENOSPC;
|
|
|
|
|
}
|
|
|
|
|
*buflenp = len;
|
|
|
|
|
return wi_read_bap(sc, rid, sizeof(ltbuf), buf, len);
|
|
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
|
|
|
|
wi_write_rid(struct wi_softc *sc, int rid, void *buf, int buflen)
|
|
|
|
|
{
|
|
|
|
|
int error;
|
|
|
|
|
u_int16_t ltbuf[2];
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
ltbuf[0] = htole16((buflen + 1) / 2 + 1); /* includes rid */
|
|
|
|
|
ltbuf[1] = htole16(rid);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
error = wi_write_bap(sc, rid, 0, ltbuf, sizeof(ltbuf));
|
2008-04-20 20:35:46 +00:00
|
|
|
if (error) {
|
|
|
|
|
device_printf(sc->sc_dev, "%s: bap0 write failure, rid 0x%x\n",
|
|
|
|
|
__func__, rid);
|
2003-01-15 20:11:31 +00:00
|
|
|
return error;
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
2003-01-15 20:11:31 +00:00
|
|
|
error = wi_write_bap(sc, rid, sizeof(ltbuf), buf, buflen);
|
2008-04-20 20:35:46 +00:00
|
|
|
if (error) {
|
|
|
|
|
device_printf(sc->sc_dev, "%s: bap1 write failure, rid 0x%x\n",
|
|
|
|
|
__func__, rid);
|
2003-01-15 20:11:31 +00:00
|
|
|
return error;
|
2008-04-20 20:35:46 +00:00
|
|
|
}
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
return wi_cmd(sc, WI_CMD_ACCESS | WI_ACCESS_WRITE, rid, 0, 0);
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
static int
|
2008-04-20 20:35:46 +00:00
|
|
|
wi_write_appie(struct wi_softc *sc, int rid, const struct ieee80211_appie *ie)
|
2003-01-15 20:11:31 +00:00
|
|
|
{
|
2008-04-20 20:35:46 +00:00
|
|
|
/* NB: 42 bytes is probably ok to have on the stack */
|
|
|
|
|
char buf[sizeof(uint16_t) + 40];
|
|
|
|
|
|
|
|
|
|
if (ie->ie_len > 40)
|
|
|
|
|
return EINVAL;
|
|
|
|
|
/* NB: firmware requires 16-bit ie length before ie data */
|
|
|
|
|
*(uint16_t *) buf = htole16(ie->ie_len);
|
|
|
|
|
memcpy(buf + sizeof(uint16_t), ie->ie_data, ie->ie_len);
|
|
|
|
|
return wi_write_rid(sc, rid, buf, ie->ie_len + sizeof(uint16_t));
|
Add device driver support for the Lucent WaveLAN/IEEE 802.11 wireless
network adapters. These are all PCMCIA devices (the ISA version is a
PCMCIA to ISA bridge with a PCMCIA card plugged into it). Also add a
wicontrol utility to read and write some of the card's parameters.
Note: I do not have access to a WavePOINT access point, so I have only
been able to test this driver in ad-hoc (point to point) mode. The
wicontrol utility allows programming the desired service set name (SSID)
and enabling BSS mode, but I can't tell for sure if it works (I know the
card switches modes, but I can't verify that it joins a service set
correctly).
This driver was written using information gleaned from the Lucent HCF Light
library, which is an API library designed to simplify driver development
for devices based on the Lucent Hermes chip. Unfortunately, the HCF Light
is missing certain features (like 802.11 frame encapsulation!) which are
available only in the proprietary complete HCF code, which is not available
to the public. This driver uses none of the HCF Light code: it's very ugly
and contaminated by the GPL. IP and ARP packets are encapsulated as 802.11
frames, everything else is encapsulated as 802.3.
(It would be easier to just get the Hermes programming manual, but that's
not publically available either. For those who are wondering, the Linux
WaveLAN/IEEE driver uses the proprietary HCF code, which is provided in
object code form only. So much for supporting open source sofware.)
Multicast filter support is implemented, however it appears that the
filter doesn't work: programming in one IP mutlicast group enables them
all.
1999-05-05 07:11:38 +00:00
|
|
|
}
|
|
|
|
|
|
2002-04-02 02:38:35 +00:00
|
|
|
int
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_alloc(device_t dev, int rid)
|
1999-11-25 20:45:49 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_softc *sc = device_get_softc(dev);
|
1999-11-25 20:45:49 +00:00
|
|
|
|
2002-02-12 17:52:11 +00:00
|
|
|
if (sc->wi_bus_type != WI_BUS_PCI_NATIVE) {
|
|
|
|
|
sc->iobase_rid = rid;
|
|
|
|
|
sc->iobase = bus_alloc_resource(dev, SYS_RES_IOPORT,
|
|
|
|
|
&sc->iobase_rid, 0, ~0, (1 << 6),
|
|
|
|
|
rman_make_alignment_flags(1 << 6) | RF_ACTIVE);
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->iobase == NULL) {
|
2002-02-12 17:52:11 +00:00
|
|
|
device_printf(dev, "No I/O space?!\n");
|
2008-04-20 20:35:46 +00:00
|
|
|
return ENXIO;
|
2002-02-12 17:52:11 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sc->wi_io_addr = rman_get_start(sc->iobase);
|
|
|
|
|
sc->wi_btag = rman_get_bustag(sc->iobase);
|
|
|
|
|
sc->wi_bhandle = rman_get_bushandle(sc->iobase);
|
|
|
|
|
} else {
|
|
|
|
|
sc->mem_rid = rid;
|
2004-03-17 17:50:55 +00:00
|
|
|
sc->mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
|
|
|
&sc->mem_rid, RF_ACTIVE);
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->mem == NULL) {
|
2002-02-12 17:52:11 +00:00
|
|
|
device_printf(dev, "No Mem space on prism2.5?\n");
|
2008-04-20 20:35:46 +00:00
|
|
|
return ENXIO;
|
2002-02-12 17:52:11 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
|
|
sc->wi_btag = rman_get_bustag(sc->mem);
|
|
|
|
|
sc->wi_bhandle = rman_get_bushandle(sc->mem);
|
1999-11-25 20:45:49 +00:00
|
|
|
}
|
|
|
|
|
|
2001-03-28 05:05:05 +00:00
|
|
|
sc->irq_rid = 0;
|
2004-03-17 17:50:55 +00:00
|
|
|
sc->irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &sc->irq_rid,
|
|
|
|
|
RF_ACTIVE |
|
2002-02-12 17:52:11 +00:00
|
|
|
((sc->wi_bus_type == WI_BUS_PCCARD) ? 0 : RF_SHAREABLE));
|
2008-04-20 20:35:46 +00:00
|
|
|
if (sc->irq == NULL) {
|
2001-04-05 06:56:10 +00:00
|
|
|
wi_free(dev);
|
1999-11-25 20:45:49 +00:00
|
|
|
device_printf(dev, "No irq?!\n");
|
2008-04-20 20:35:46 +00:00
|
|
|
return ENXIO;
|
1999-11-25 20:45:49 +00:00
|
|
|
}
|
|
|
|
|
|
2003-01-15 20:11:31 +00:00
|
|
|
sc->sc_dev = dev;
|
|
|
|
|
sc->sc_unit = device_get_unit(dev);
|
2008-04-20 20:35:46 +00:00
|
|
|
return 0;
|
1999-11-25 20:45:49 +00:00
|
|
|
}
|
|
|
|
|
|
2002-04-02 02:38:35 +00:00
|
|
|
void
|
2003-01-15 20:11:31 +00:00
|
|
|
wi_free(device_t dev)
|
1999-11-25 20:45:49 +00:00
|
|
|
{
|
2003-01-15 20:11:31 +00:00
|
|
|
struct wi_softc *sc = device_get_softc(dev);
|
1999-11-25 20:45:49 +00:00
|
|
|
|
2001-04-05 06:56:10 +00:00
|
|
|
if (sc->iobase != NULL) {
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IOPORT, sc->iobase_rid, sc->iobase);
|
|
|
|
|
sc->iobase = NULL;
|
|
|
|
|
}
|
|
|
|
|
if (sc->irq != NULL) {
|
|
|
|
|
bus_release_resource(dev, SYS_RES_IRQ, sc->irq_rid, sc->irq);
|
|
|
|
|
sc->irq = NULL;
|
|
|
|
|
}
|
|
|
|
|
if (sc->mem != NULL) {
|
2001-03-28 05:05:05 +00:00
|
|
|
bus_release_resource(dev, SYS_RES_MEMORY, sc->mem_rid, sc->mem);
|
2001-04-05 06:56:10 +00:00
|
|
|
sc->mem = NULL;
|
|
|
|
|
}
|
Update 802.11 wireless support:
o major overhaul of the way channels are handled: channels are now
fully enumerated and uniquely identify the operating characteristics;
these changes are visible to user applications which require changes
o make scanning support independent of the state machine to enable
background scanning and roaming
o move scanning support into loadable modules based on the operating
mode to enable different policies and reduce the memory footprint
on systems w/ constrained resources
o add background scanning in station mode (no support for adhoc/ibss
mode yet)
o significantly speedup sta mode scanning with a variety of techniques
o add roaming support when background scanning is supported; for now
we use a simple algorithm to trigger a roam: we threshold the rssi
and tx rate, if either drops too low we try to roam to a new ap
o add tx fragmentation support
o add first cut at 802.11n support: this code works with forthcoming
drivers but is incomplete; it's included now to establish a baseline
for other drivers to be developed and for user applications
o adjust max_linkhdr et. al. to reflect 802.11 requirements; this eliminates
prepending mbufs for traffic generated locally
o add support for Atheros protocol extensions; mainly the fast frames
encapsulation (note this can be used with any card that can tx+rx
large frames correctly)
o add sta support for ap's that beacon both WPA1+2 support
o change all data types from bsd-style to posix-style
o propagate noise floor data from drivers to net80211 and on to user apps
o correct various issues in the sta mode state machine related to handling
authentication and association failures
o enable the addition of sta mode power save support for drivers that need
net80211 support (not in this commit)
o remove old WI compatibility ioctls (wicontrol is officially dead)
o change the data structures returned for get sta info and get scan
results so future additions will not break user apps
o fixed tx rate is now maintained internally as an ieee rate and not an
index into the rate set; this needs to be extended to deal with
multi-mode operation
o add extended channel specifications to radiotap to enable 11n sniffing
Drivers:
o ath: add support for bg scanning, tx fragmentation, fast frames,
dynamic turbo (lightly tested), 11n (sniffing only and needs
new hal)
o awi: compile tested only
o ndis: lightly tested
o ipw: lightly tested
o iwi: add support for bg scanning (well tested but may have some
rough edges)
o ral, ural, rum: add suppoort for bg scanning, calibrate rssi data
o wi: lightly tested
This work is based on contributions by Atheros, kmacy, sephe, thompsa,
mlaier, kevlo, and others. Much of the scanning work was supported by
Atheros. The 11n work was supported by Marvell.
2007-06-11 03:36:55 +00:00
|
|
|
}
|
