d/freebsd-dev
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
f98c8ea46c
freebsd-dev/sys/amd64/include/ucontext.h

82 lines
2.8 KiB
C
Raw Normal View History

sigset_t change (part 3 of 5) ----------------------------- By introducing a new sigframe so that the signal handler operates on the new siginfo_t and on ucontext_t instead of sigcontext, we now need two version of sendsig and sigreturn. A flag in struct proc determines whether the process expects an old sigframe or a new sigframe. The signal trampoline handles which sigreturn to call. It does this by testing for a magic cookie in the frame. The alpha uses osigreturn to implement longjmp. This means that osigreturn is not only used for compatibility with existing binaries. To handle the new sigset_t, setjmp saves it in sc_reserved (see NOTE). the struct sigframe has been moved from frame.h to sigframe.h to handle the complex header dependencies that was caused by the new sigframe. NOTE: For the i386, the size of jmp_buf has been increased to hold the new sigset_t. On the alpha this has been prevented by using sc_reserved in sigcontext.
1999-09-29 15:06:27 +00:00
/*-
* Copyright (c) 1999 Marcel Moolenaar
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MACHINE_UCONTEXT_H_
Re-introduction of sigcontext. struct sigcontext and ucontext_t/mcontext_t are defined in such a way that both (ie struct sigcontext and ucontext_t) can be passed on to sigreturn. The signal handler is still given a ucontext_t for maximum flexibility. For backward compatibility sigreturn restores the state for the alternate signal stack from sigcontext.sc_onstack and not from ucontext_t.uc_stack. A good way to determine which value the application has set and thus which value to use, is still open for discussion. NOTE: This change should only affect those binaries that use sigcontext and/or ucontext_t. In the source tree itself this is only doscmd. Recompilation is required for those applications. This commit also fixes a lot of style bugs without hopefully adding new ones. NOTE: struct sigaltstack.ss_size now has type size_t again. For some reason I changed that into unsigned int. Parts submitted by: bde sigaltstack bug found by: bde
1999-10-04 19:33:58 +00:00
#define _MACHINE_UCONTEXT_H_
sigset_t change (part 3 of 5) ----------------------------- By introducing a new sigframe so that the signal handler operates on the new siginfo_t and on ucontext_t instead of sigcontext, we now need two version of sendsig and sigreturn. A flag in struct proc determines whether the process expects an old sigframe or a new sigframe. The signal trampoline handles which sigreturn to call. It does this by testing for a magic cookie in the frame. The alpha uses osigreturn to implement longjmp. This means that osigreturn is not only used for compatibility with existing binaries. To handle the new sigset_t, setjmp saves it in sc_reserved (see NOTE). the struct sigframe has been moved from frame.h to sigframe.h to handle the complex header dependencies that was caused by the new sigframe. NOTE: For the i386, the size of jmp_buf has been increased to hold the new sigset_t. On the alpha this has been prevented by using sc_reserved in sigcontext.
1999-09-29 15:06:27 +00:00
Re-introduction of sigcontext. struct sigcontext and ucontext_t/mcontext_t are defined in such a way that both (ie struct sigcontext and ucontext_t) can be passed on to sigreturn. The signal handler is still given a ucontext_t for maximum flexibility. For backward compatibility sigreturn restores the state for the alternate signal stack from sigcontext.sc_onstack and not from ucontext_t.uc_stack. A good way to determine which value the application has set and thus which value to use, is still open for discussion. NOTE: This change should only affect those binaries that use sigcontext and/or ucontext_t. In the source tree itself this is only doscmd. Recompilation is required for those applications. This commit also fixes a lot of style bugs without hopefully adding new ones. NOTE: struct sigaltstack.ss_size now has type size_t again. For some reason I changed that into unsigned int. Parts submitted by: bde sigaltstack bug found by: bde
1999-10-04 19:33:58 +00:00
typedef struct __mcontext {
/*
Simplification of the signal trampoline and other cleanups. o Remove unused defines from genassym.c that were needed by the trampoline. o Add load_gs_param function to support.s that catches a fault when %gs is loaded with an invalid descriptor. The function returns EFAULT in that case. o Remove struct trapframe from mcontext_t and replace it with the list of registers. o Modify sendsig and sigreturn accordingly. This commit contains a patch by bde. Reviewed by: luoqi, jdp
1999-10-07 12:40:34 +00:00
* The first 20 fields must match the definition of
Re-introduction of sigcontext. struct sigcontext and ucontext_t/mcontext_t are defined in such a way that both (ie struct sigcontext and ucontext_t) can be passed on to sigreturn. The signal handler is still given a ucontext_t for maximum flexibility. For backward compatibility sigreturn restores the state for the alternate signal stack from sigcontext.sc_onstack and not from ucontext_t.uc_stack. A good way to determine which value the application has set and thus which value to use, is still open for discussion. NOTE: This change should only affect those binaries that use sigcontext and/or ucontext_t. In the source tree itself this is only doscmd. Recompilation is required for those applications. This commit also fixes a lot of style bugs without hopefully adding new ones. NOTE: struct sigaltstack.ss_size now has type size_t again. For some reason I changed that into unsigned int. Parts submitted by: bde sigaltstack bug found by: bde
1999-10-04 19:33:58 +00:00
* sigcontext. So that we can support sigcontext
* and ucontext_t at the same time.
*/
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t mc_onstack; /* XXX - sigcontext compat. */
Sync ucontext with reality. The struct trapframe changes need to be reflected here. Approved by: re (blanket amd64/*)
2003-05-12 18:23:04 +00:00
register_t mc_rdi; /* machine state (struct trapframe) */
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t mc_rsi;
register_t mc_rdx;
register_t mc_rcx;
Sync ucontext with reality. The struct trapframe changes need to be reflected here. Approved by: re (blanket amd64/*)
2003-05-12 18:23:04 +00:00
register_t mc_r8;
register_t mc_r9;
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t mc_rax;
Sync ucontext with reality. The struct trapframe changes need to be reflected here. Approved by: re (blanket amd64/*)
2003-05-12 18:23:04 +00:00
register_t mc_rbx;
register_t mc_rbp;
register_t mc_r10;
register_t mc_r11;
register_t mc_r12;
register_t mc_r13;
register_t mc_r14;
register_t mc_r15;
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t mc_trapno;
For the page fault handler, save %cr2 in the outer trap handler so that we do not have to run so long with interrupts disabled. This involved creating tf_addr in the trapframe. Reorganize the trap stubs so that they consistently reserve the stack space and initialize any missing bits. Approved by: re (amd64 stuff)
2003-05-12 18:33:19 +00:00
register_t mc_addr;
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
register_t mc_err;
register_t mc_rip;
register_t mc_cs;
register_t mc_rflags;
register_t mc_rsp;
register_t mc_ss;
Re-introduction of sigcontext. struct sigcontext and ucontext_t/mcontext_t are defined in such a way that both (ie struct sigcontext and ucontext_t) can be passed on to sigreturn. The signal handler is still given a ucontext_t for maximum flexibility. For backward compatibility sigreturn restores the state for the alternate signal stack from sigcontext.sc_onstack and not from ucontext_t.uc_stack. A good way to determine which value the application has set and thus which value to use, is still open for discussion. NOTE: This change should only affect those binaries that use sigcontext and/or ucontext_t. In the source tree itself this is only doscmd. Recompilation is required for those applications. This commit also fixes a lot of style bugs without hopefully adding new ones. NOTE: struct sigaltstack.ss_size now has type size_t again. For some reason I changed that into unsigned int. Parts submitted by: bde sigaltstack bug found by: bde
1999-10-04 19:33:58 +00:00
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
long mc_len; /* sizeof(mcontext_t) */
Add another temporary hack to allow running older i386 binaries. This will be removed when new versions of syscalls sigreturn() and sigaction() are added (mini is working on this but is in the middle of a move). This should fix the problem of cvsupd dying.
2002-10-04 14:50:55 +00:00
#define _MC_FPFMT_NODEV 0x10000 /* device not present or configured */
#define _MC_FPFMT_XMM 0x10002
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
long mc_fpformat;
Add another temporary hack to allow running older i386 binaries. This will be removed when new versions of syscalls sigreturn() and sigaction() are added (mini is working on this but is in the middle of a move). This should fix the problem of cvsupd dying.
2002-10-04 14:50:55 +00:00
#define _MC_FPOWNED_NONE 0x20000 /* FP state not used */
#define _MC_FPOWNED_FPU 0x20001 /* FP state came from FPU */
#define _MC_FPOWNED_PCB 0x20002 /* FP state came from PCB */
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
long mc_ownedfp;
long mc_spare1[1]; /* align next field to 16 bytes */
Align the FPU state in the ucontext and sigcontext to 16 bytes to accomodate the new SSE/XMM floating point save/restore instructions. This commit is mostly from bde and includes some style nits. Approved by: re (jhb)
2002-12-02 19:58:55 +00:00
/*
* See <machine/npx.h> for the internals of mc_fpstate[].
*/
Commit MD parts of a loosely functional AMD64 port. This is based on a heavily stripped down FreeBSD/i386 (brutally stripped down actually) to attempt to get a stable base to start from. There is a lot missing still. Worth noting: - The kernel runs at 1GB in order to cheat with the pmap code. pmap uses a variation of the PAE code in order to avoid having to worry about 4 levels of page tables yet. - It boots in 64 bit "long mode" with a tiny trampoline embedded in the i386 loader. This simplifies locore.s greatly. - There are still quite a few fragments of i386-specific code that have not been translated yet, and some that I cheated and wrote dumb C versions of (bcopy etc). - It has both int 0x80 for syscalls (but using registers for argument passing, as is native on the amd64 ABI), and the 'syscall' instruction for syscalls. int 0x80 preserves all registers, 'syscall' does not. - I have tried to minimize looking at the NetBSD code, except in a couple of places (eg: to find which register they use to replace the trashed %rcx register in the syscall instruction). As a result, there is not a lot of similarity. I did look at NetBSD a few times while debugging to get some ideas about what I might have done wrong in my first attempt.
2003-05-01 01:05:25 +00:00
long mc_fpstate[128] __aligned(16);
long mc_spare2[8];
sigset_t change (part 3 of 5) ----------------------------- By introducing a new sigframe so that the signal handler operates on the new siginfo_t and on ucontext_t instead of sigcontext, we now need two version of sendsig and sigreturn. A flag in struct proc determines whether the process expects an old sigframe or a new sigframe. The signal trampoline handles which sigreturn to call. It does this by testing for a magic cookie in the frame. The alpha uses osigreturn to implement longjmp. This means that osigreturn is not only used for compatibility with existing binaries. To handle the new sigset_t, setjmp saves it in sc_reserved (see NOTE). the struct sigframe has been moved from frame.h to sigframe.h to handle the complex header dependencies that was caused by the new sigframe. NOTE: For the i386, the size of jmp_buf has been increased to hold the new sigset_t. On the alpha this has been prevented by using sc_reserved in sigcontext.
1999-09-29 15:06:27 +00:00
} mcontext_t;
Re-introduction of sigcontext. struct sigcontext and ucontext_t/mcontext_t are defined in such a way that both (ie struct sigcontext and ucontext_t) can be passed on to sigreturn. The signal handler is still given a ucontext_t for maximum flexibility. For backward compatibility sigreturn restores the state for the alternate signal stack from sigcontext.sc_onstack and not from ucontext_t.uc_stack. A good way to determine which value the application has set and thus which value to use, is still open for discussion. NOTE: This change should only affect those binaries that use sigcontext and/or ucontext_t. In the source tree itself this is only doscmd. Recompilation is required for those applications. This commit also fixes a lot of style bugs without hopefully adding new ones. NOTE: struct sigaltstack.ss_size now has type size_t again. For some reason I changed that into unsigned int. Parts submitted by: bde sigaltstack bug found by: bde
1999-10-04 19:33:58 +00:00
#endif /* !_MACHINE_UCONTEXT_H_ */
Reference in New Issue Copy Permalink