freebsd-dev/sys/kern/kern_mutex.c

952 lines
25 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1998 Berkeley Software Design, Inc. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Berkeley Software Design Inc's name may not be used to endorse or
* promote products derived from this software without specific prior
* written permission.
*
* THIS SOFTWARE IS PROVIDED BY BERKELEY SOFTWARE DESIGN INC ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL BERKELEY SOFTWARE DESIGN INC BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from BSDI $Id: mutex_witness.c,v 1.1.2.20 2000/04/27 03:10:27 cp Exp $
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
* and BSDI $Id: synch_machdep.c,v 2.3.2.39 2000/04/27 03:10:25 cp Exp $
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* Machine independent bits of mutex implementation.
*/
2003-06-11 00:56:59 +00:00
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_adaptive_mutexes.h"
#include "opt_ddb.h"
#include "opt_mprof.h"
#include "opt_mutex_wake_all.h"
#include "opt_sched.h"
#include <sys/param.h>
#include <sys/systm.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/kdb.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/kernel.h>
#include <sys/ktr.h>
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
#include <sys/lock.h>
#include <sys/malloc.h>
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/resourcevar.h>
#include <sys/sched.h>
#include <sys/sbuf.h>
#include <sys/sysctl.h>
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
#include <sys/turnstile.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <sys/vmmeter.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <machine/atomic.h>
#include <machine/bus.h>
#include <machine/cpu.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <ddb/ddb.h>
#include <fs/devfs/devfs_int.h>
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#include <vm/vm.h>
#include <vm/vm_extern.h>
/*
* Force MUTEX_WAKE_ALL for now.
* single thread wakeup needs fixes to avoid race conditions with
* priority inheritance.
*/
#ifndef MUTEX_WAKE_ALL
#define MUTEX_WAKE_ALL
#endif
/*
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
* Internal utility macros.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
#define mtx_unowned(m) ((m)->mtx_lock == MTX_UNOWNED)
#define mtx_owner(m) ((struct thread *)((m)->mtx_lock & (MTX_FLAGMASK|MTX_UNOWNED)))
#ifdef DDB
static void db_show_mtx(struct lock_object *lock);
#endif
/*
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
* Lock classes for sleep and spin mutexes.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
struct lock_class lock_class_mtx_sleep = {
"sleep mutex",
LC_SLEEPLOCK | LC_RECURSABLE,
#ifdef DDB
db_show_mtx
#endif
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
};
struct lock_class lock_class_mtx_spin = {
"spin mutex",
LC_SPINLOCK | LC_RECURSABLE,
#ifdef DDB
db_show_mtx
#endif
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
};
/*
* System-wide mutexes
*/
struct mtx sched_lock;
struct mtx Giant;
#ifdef MUTEX_PROFILING
SYSCTL_NODE(_debug, OID_AUTO, mutex, CTLFLAG_RD, NULL, "mutex debugging");
SYSCTL_NODE(_debug_mutex, OID_AUTO, prof, CTLFLAG_RD, NULL, "mutex profiling");
static int mutex_prof_enable = 0;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, enable, CTLFLAG_RW,
&mutex_prof_enable, 0, "Enable tracing of mutex holdtime");
struct mutex_prof {
const char *name;
const char *file;
int line;
uintmax_t cnt_max;
uintmax_t cnt_tot;
uintmax_t cnt_cur;
uintmax_t cnt_contest_holding;
uintmax_t cnt_contest_locking;
struct mutex_prof *next;
};
/*
* mprof_buf is a static pool of profiling records to avoid possible
* reentrance of the memory allocation functions.
*
* Note: NUM_MPROF_BUFFERS must be smaller than MPROF_HASH_SIZE.
*/
#ifdef MPROF_BUFFERS
#define NUM_MPROF_BUFFERS MPROF_BUFFERS
#else
#define NUM_MPROF_BUFFERS 1000
#endif
static struct mutex_prof mprof_buf[NUM_MPROF_BUFFERS];
static int first_free_mprof_buf;
#ifndef MPROF_HASH_SIZE
#define MPROF_HASH_SIZE 1009
#endif
#if NUM_MPROF_BUFFERS >= MPROF_HASH_SIZE
#error MPROF_BUFFERS must be larger than MPROF_HASH_SIZE
#endif
static struct mutex_prof *mprof_hash[MPROF_HASH_SIZE];
/* SWAG: sbuf size = avg stat. line size * number of locks */
#define MPROF_SBUF_SIZE 256 * 400
static int mutex_prof_acquisitions;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, acquisitions, CTLFLAG_RD,
&mutex_prof_acquisitions, 0, "Number of mutex acquistions recorded");
static int mutex_prof_records;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, records, CTLFLAG_RD,
&mutex_prof_records, 0, "Number of profiling records");
static int mutex_prof_maxrecords = NUM_MPROF_BUFFERS;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, maxrecords, CTLFLAG_RD,
&mutex_prof_maxrecords, 0, "Maximum number of profiling records");
static int mutex_prof_rejected;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, rejected, CTLFLAG_RD,
&mutex_prof_rejected, 0, "Number of rejected profiling records");
static int mutex_prof_hashsize = MPROF_HASH_SIZE;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, hashsize, CTLFLAG_RD,
&mutex_prof_hashsize, 0, "Hash size");
static int mutex_prof_collisions = 0;
SYSCTL_INT(_debug_mutex_prof, OID_AUTO, collisions, CTLFLAG_RD,
&mutex_prof_collisions, 0, "Number of hash collisions");
/*
* mprof_mtx protects the profiling buffers and the hash.
*/
static struct mtx mprof_mtx;
MTX_SYSINIT(mprof, &mprof_mtx, "mutex profiling lock", MTX_SPIN | MTX_QUIET);
static u_int64_t
nanoseconds(void)
{
struct timespec tv;
nanotime(&tv);
return (tv.tv_sec * (u_int64_t)1000000000 + tv.tv_nsec);
}
static int
dump_mutex_prof_stats(SYSCTL_HANDLER_ARGS)
{
struct sbuf *sb;
int error, i;
static int multiplier = 1;
if (first_free_mprof_buf == 0)
return (SYSCTL_OUT(req, "No locking recorded",
sizeof("No locking recorded")));
retry_sbufops:
sb = sbuf_new(NULL, NULL, MPROF_SBUF_SIZE * multiplier, SBUF_FIXEDLEN);
sbuf_printf(sb, "\n%6s %12s %11s %5s %12s %12s %s\n",
"max", "total", "count", "avg", "cnt_hold", "cnt_lock", "name");
/*
* XXX this spinlock seems to be by far the largest perpetrator
* of spinlock latency (1.6 msec on an Athlon1600 was recorded
* even before I pessimized it further by moving the average
* computation here).
*/
mtx_lock_spin(&mprof_mtx);
for (i = 0; i < first_free_mprof_buf; ++i) {
sbuf_printf(sb, "%6ju %12ju %11ju %5ju %12ju %12ju %s:%d (%s)\n",
mprof_buf[i].cnt_max / 1000,
mprof_buf[i].cnt_tot / 1000,
mprof_buf[i].cnt_cur,
mprof_buf[i].cnt_cur == 0 ? (uintmax_t)0 :
mprof_buf[i].cnt_tot / (mprof_buf[i].cnt_cur * 1000),
mprof_buf[i].cnt_contest_holding,
mprof_buf[i].cnt_contest_locking,
mprof_buf[i].file, mprof_buf[i].line, mprof_buf[i].name);
if (sbuf_overflowed(sb)) {
mtx_unlock_spin(&mprof_mtx);
sbuf_delete(sb);
multiplier++;
goto retry_sbufops;
}
}
mtx_unlock_spin(&mprof_mtx);
sbuf_finish(sb);
error = SYSCTL_OUT(req, sbuf_data(sb), sbuf_len(sb) + 1);
sbuf_delete(sb);
return (error);
}
SYSCTL_PROC(_debug_mutex_prof, OID_AUTO, stats, CTLTYPE_STRING | CTLFLAG_RD,
NULL, 0, dump_mutex_prof_stats, "A", "Mutex profiling statistics");
static int
reset_mutex_prof_stats(SYSCTL_HANDLER_ARGS)
{
int error, v;
if (first_free_mprof_buf == 0)
return (0);
v = 0;
error = sysctl_handle_int(oidp, &v, 0, req);
if (error)
return (error);
if (req->newptr == NULL)
return (error);
if (v == 0)
return (0);
mtx_lock_spin(&mprof_mtx);
bzero(mprof_buf, sizeof(*mprof_buf) * first_free_mprof_buf);
bzero(mprof_hash, sizeof(struct mtx *) * MPROF_HASH_SIZE);
first_free_mprof_buf = 0;
mtx_unlock_spin(&mprof_mtx);
return (0);
}
SYSCTL_PROC(_debug_mutex_prof, OID_AUTO, reset, CTLTYPE_INT | CTLFLAG_RW,
NULL, 0, reset_mutex_prof_stats, "I", "Reset mutex profiling statistics");
#endif
/*
* Function versions of the inlined __mtx_* macros. These are used by
* modules and can also be called from assembly language if needed.
*/
void
_mtx_lock_flags(struct mtx *m, int opts, const char *file, int line)
{
MPASS(curthread != NULL);
KASSERT(LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_sleep,
("mtx_lock() of spin mutex %s @ %s:%d", m->mtx_object.lo_name,
file, line));
Rework witness_lock() to make it slightly more useful and flexible. - witness_lock() is split into two pieces: witness_checkorder() and witness_lock(). Witness_checkorder() determines if acquiring a specified lock at the time it is called would result in a lock order. It optionally adds a new lock order relationship as well. witness_lock() updates witness's data structures to assume that a lock has been acquired by stick a new lock instance in the appropriate lock instance list. - The mutex and sx lock functions now call checkorder() prior to trying to acquire a lock and continue to call witness_lock() after the acquire is completed. This will let witness catch a deadlock before it happens rather than trying to do so after the threads have deadlocked (i.e. never actually report it). - A new function witness_defineorder() has been added that adds a lock order between two locks at runtime without having to acquire the locks. If the lock order cannot be added it will return an error. This function is available to programmers via the WITNESS_DEFINEORDER() macro which accepts either two mutexes or two sx locks as its arguments. - A few simple wrapper macros were added to allow developers to call witness_checkorder() anywhere as a way of enforcing locking assertions in code that might acquire a certain lock in some situations. The macros are: witness_check_{mutex,shared_sx,exclusive_sx} and take an appropriate lock as the sole argument. - The code to remove a lock instance from a lock list in witness_unlock() was unnested by using a goto to vastly improve the readability of this function.
2004-01-28 20:39:57 +00:00
WITNESS_CHECKORDER(&m->mtx_object, opts | LOP_NEWORDER | LOP_EXCLUSIVE,
file, line);
_get_sleep_lock(m, curthread, opts, file, line);
LOCK_LOG_LOCK("LOCK", &m->mtx_object, opts, m->mtx_recurse, file,
line);
WITNESS_LOCK(&m->mtx_object, opts | LOP_EXCLUSIVE, file, line);
#ifdef MUTEX_PROFILING
/* don't reset the timer when/if recursing */
if (m->mtx_acqtime == 0) {
m->mtx_filename = file;
m->mtx_lineno = line;
m->mtx_acqtime = mutex_prof_enable ? nanoseconds() : 0;
++mutex_prof_acquisitions;
}
#endif
}
void
_mtx_unlock_flags(struct mtx *m, int opts, const char *file, int line)
{
MPASS(curthread != NULL);
KASSERT(LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_sleep,
("mtx_unlock() of spin mutex %s @ %s:%d", m->mtx_object.lo_name,
file, line));
2002-10-23 10:26:54 +00:00
WITNESS_UNLOCK(&m->mtx_object, opts | LOP_EXCLUSIVE, file, line);
LOCK_LOG_LOCK("UNLOCK", &m->mtx_object, opts, m->mtx_recurse, file,
line);
mtx_assert(m, MA_OWNED);
#ifdef MUTEX_PROFILING
if (m->mtx_acqtime != 0) {
static const char *unknown = "(unknown)";
struct mutex_prof *mpp;
u_int64_t acqtime, now;
const char *p, *q;
volatile u_int hash;
now = nanoseconds();
acqtime = m->mtx_acqtime;
m->mtx_acqtime = 0;
if (now <= acqtime)
goto out;
for (p = m->mtx_filename;
p != NULL && strncmp(p, "../", 3) == 0; p += 3)
/* nothing */ ;
if (p == NULL || *p == '\0')
p = unknown;
for (hash = m->mtx_lineno, q = p; *q != '\0'; ++q)
hash = (hash * 2 + *q) % MPROF_HASH_SIZE;
mtx_lock_spin(&mprof_mtx);
for (mpp = mprof_hash[hash]; mpp != NULL; mpp = mpp->next)
if (mpp->line == m->mtx_lineno &&
strcmp(mpp->file, p) == 0)
break;
if (mpp == NULL) {
/* Just exit if we cannot get a trace buffer */
if (first_free_mprof_buf >= NUM_MPROF_BUFFERS) {
++mutex_prof_rejected;
goto unlock;
}
mpp = &mprof_buf[first_free_mprof_buf++];
mpp->name = mtx_name(m);
mpp->file = p;
mpp->line = m->mtx_lineno;
mpp->next = mprof_hash[hash];
if (mprof_hash[hash] != NULL)
++mutex_prof_collisions;
2002-10-23 10:26:54 +00:00
mprof_hash[hash] = mpp;
++mutex_prof_records;
}
/*
* Record if the mutex has been held longer now than ever
* before.
*/
if (now - acqtime > mpp->cnt_max)
mpp->cnt_max = now - acqtime;
mpp->cnt_tot += now - acqtime;
mpp->cnt_cur++;
/*
* There's a small race, really we should cmpxchg
* 0 with the current value, but that would bill
* the contention to the wrong lock instance if
* it followed this also.
*/
mpp->cnt_contest_holding += m->mtx_contest_holding;
m->mtx_contest_holding = 0;
mpp->cnt_contest_locking += m->mtx_contest_locking;
m->mtx_contest_locking = 0;
unlock:
mtx_unlock_spin(&mprof_mtx);
}
out:
#endif
_rel_sleep_lock(m, curthread, opts, file, line);
}
void
_mtx_lock_spin_flags(struct mtx *m, int opts, const char *file, int line)
{
MPASS(curthread != NULL);
KASSERT(LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_spin,
("mtx_lock_spin() of sleep mutex %s @ %s:%d",
m->mtx_object.lo_name, file, line));
Rework witness_lock() to make it slightly more useful and flexible. - witness_lock() is split into two pieces: witness_checkorder() and witness_lock(). Witness_checkorder() determines if acquiring a specified lock at the time it is called would result in a lock order. It optionally adds a new lock order relationship as well. witness_lock() updates witness's data structures to assume that a lock has been acquired by stick a new lock instance in the appropriate lock instance list. - The mutex and sx lock functions now call checkorder() prior to trying to acquire a lock and continue to call witness_lock() after the acquire is completed. This will let witness catch a deadlock before it happens rather than trying to do so after the threads have deadlocked (i.e. never actually report it). - A new function witness_defineorder() has been added that adds a lock order between two locks at runtime without having to acquire the locks. If the lock order cannot be added it will return an error. This function is available to programmers via the WITNESS_DEFINEORDER() macro which accepts either two mutexes or two sx locks as its arguments. - A few simple wrapper macros were added to allow developers to call witness_checkorder() anywhere as a way of enforcing locking assertions in code that might acquire a certain lock in some situations. The macros are: witness_check_{mutex,shared_sx,exclusive_sx} and take an appropriate lock as the sole argument. - The code to remove a lock instance from a lock list in witness_unlock() was unnested by using a goto to vastly improve the readability of this function.
2004-01-28 20:39:57 +00:00
WITNESS_CHECKORDER(&m->mtx_object, opts | LOP_NEWORDER | LOP_EXCLUSIVE,
file, line);
_get_spin_lock(m, curthread, opts, file, line);
LOCK_LOG_LOCK("LOCK", &m->mtx_object, opts, m->mtx_recurse, file,
line);
WITNESS_LOCK(&m->mtx_object, opts | LOP_EXCLUSIVE, file, line);
}
void
_mtx_unlock_spin_flags(struct mtx *m, int opts, const char *file, int line)
{
MPASS(curthread != NULL);
KASSERT(LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_spin,
("mtx_unlock_spin() of sleep mutex %s @ %s:%d",
m->mtx_object.lo_name, file, line));
2002-10-23 10:26:54 +00:00
WITNESS_UNLOCK(&m->mtx_object, opts | LOP_EXCLUSIVE, file, line);
LOCK_LOG_LOCK("UNLOCK", &m->mtx_object, opts, m->mtx_recurse, file,
line);
mtx_assert(m, MA_OWNED);
_rel_spin_lock(m);
}
/*
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
* The important part of mtx_trylock{,_flags}()
* Tries to acquire lock `m.' If this function is called on a mutex that
* is already owned, it will recursively acquire the lock.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
int
_mtx_trylock(struct mtx *m, int opts, const char *file, int line)
{
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
int rval;
MPASS(curthread != NULL);
KASSERT(LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_sleep,
("mtx_trylock() of spin mutex %s @ %s:%d", m->mtx_object.lo_name,
file, line));
if (mtx_owned(m) && (m->mtx_object.lo_flags & LO_RECURSABLE) != 0) {
m->mtx_recurse++;
atomic_set_ptr(&m->mtx_lock, MTX_RECURSED);
rval = 1;
} else
rval = _obtain_lock(m, (uintptr_t)curthread);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
LOCK_LOG_TRY("LOCK", &m->mtx_object, opts, rval, file, line);
if (rval)
WITNESS_LOCK(&m->mtx_object, opts | LOP_EXCLUSIVE | LOP_TRYLOCK,
file, line);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
return (rval);
}
/*
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
* _mtx_lock_sleep: the tougher part of acquiring an MTX_DEF lock.
*
* We call this if the lock is either contested (i.e. we need to go to
* sleep waiting for it), or if we need to recurse on it.
*/
void
_mtx_lock_sleep(struct mtx *m, uintptr_t tid, int opts, const char *file,
int line)
{
#if defined(SMP) && !defined(NO_ADAPTIVE_MUTEXES)
volatile struct thread *owner;
#endif
uintptr_t v;
#ifdef KTR
int cont_logged = 0;
#endif
#ifdef MUTEX_PROFILING
int contested;
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
if (mtx_owned(m)) {
KASSERT((m->mtx_object.lo_flags & LO_RECURSABLE) != 0,
("_mtx_lock_sleep: recursed on non-recursive mutex %s @ %s:%d\n",
m->mtx_object.lo_name, file, line));
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
m->mtx_recurse++;
atomic_set_ptr(&m->mtx_lock, MTX_RECURSED);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
CTR1(KTR_LOCK, "_mtx_lock_sleep: %p recursing", m);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
return;
}
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
CTR4(KTR_LOCK,
"_mtx_lock_sleep: %s contested (lock=%p) at %s:%d",
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
m->mtx_object.lo_name, (void *)m->mtx_lock, file, line);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
#ifdef MUTEX_PROFILING
contested = 0;
#endif
while (!_obtain_lock(m, tid)) {
#ifdef MUTEX_PROFILING
contested = 1;
atomic_add_int(&m->mtx_contest_holding, 1);
#endif
turnstile_lock(&m->mtx_object);
v = m->mtx_lock;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* Check if the lock has been released while spinning for
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
* the turnstile chain lock.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
if (v == MTX_UNOWNED) {
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
turnstile_release(&m->mtx_object);
cpu_spinwait();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
continue;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
#ifdef MUTEX_WAKE_ALL
MPASS(v != MTX_CONTESTED);
#else
/*
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
* The mutex was marked contested on release. This means that
* there are other threads blocked on it. Grab ownership of
* it and propagate its priority to the current thread if
* necessary.
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
if (v == MTX_CONTESTED) {
m->mtx_lock = tid | MTX_CONTESTED;
turnstile_claim(&m->mtx_object);
break;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
}
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* If the mutex isn't already contested and a failure occurs
* setting the contested bit, the mutex was either released
* or the state of the MTX_RECURSED bit changed.
*/
if ((v & MTX_CONTESTED) == 0 &&
!atomic_cmpset_ptr(&m->mtx_lock, v, v | MTX_CONTESTED)) {
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
turnstile_release(&m->mtx_object);
cpu_spinwait();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
continue;
}
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#if defined(SMP) && !defined(NO_ADAPTIVE_MUTEXES)
/*
* If the current owner of the lock is executing on another
* CPU, spin instead of blocking.
*/
owner = (struct thread *)(v & MTX_FLAGMASK);
#ifdef ADAPTIVE_GIANT
if (TD_IS_RUNNING(owner)) {
#else
if (m != &Giant && TD_IS_RUNNING(owner)) {
#endif
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
turnstile_release(&m->mtx_object);
while (mtx_owner(m) == owner && TD_IS_RUNNING(owner)) {
cpu_spinwait();
}
continue;
}
#endif /* SMP && !NO_ADAPTIVE_MUTEXES */
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
2002-04-02 20:44:30 +00:00
* We definitely must sleep for this lock.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
mtx_assert(m, MA_NOTOWNED);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef KTR
if (!cont_logged) {
CTR6(KTR_CONTENTION,
"contention: %p at %s:%d wants %s, taken by %s:%d",
(void *)tid, file, line, m->mtx_object.lo_name,
WITNESS_FILE(&m->mtx_object),
WITNESS_LINE(&m->mtx_object));
cont_logged = 1;
}
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
* Block on the turnstile.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
turnstile_wait(&m->mtx_object, mtx_owner(m),
TS_EXCLUSIVE_QUEUE);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
}
#ifdef KTR
if (cont_logged) {
CTR4(KTR_CONTENTION,
"contention end: %s acquired by %p at %s:%d",
m->mtx_object.lo_name, (void *)tid, file, line);
}
#endif
#ifdef MUTEX_PROFILING
if (contested)
m->mtx_contest_locking++;
m->mtx_contest_holding = 0;
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
return;
}
#ifdef SMP
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* _mtx_lock_spin: the tougher part of acquiring an MTX_SPIN lock.
*
* This is only called if we need to actually spin for the lock. Recursion
* is handled inline.
*/
void
_mtx_lock_spin(struct mtx *m, uintptr_t tid, int opts, const char *file,
int line)
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
{
int i = 0;
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
CTR1(KTR_LOCK, "_mtx_lock_spin: %p spinning", m);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
while (!_obtain_lock(m, tid)) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/* Give interrupts a chance while we spin. */
Divorce critical sections from spinlocks. Critical sections as denoted by critical_enter() and critical_exit() are now solely a mechanism for deferring kernel preemptions. They no longer have any affect on interrupts. This means that standalone critical sections are now very cheap as they are simply unlocked integer increments and decrements for the common case. Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter() and spinlock_exit(). This KPI is responsible for providing whatever MD guarantees are needed to ensure that a thread holding a spin lock won't be preempted by any other code that will try to lock the same lock. For now all archs continue to block interrupts in a "spinlock section" as they did formerly in all critical sections. Note that I've also taken this opportunity to push a few things into MD code rather than MI. For example, critical_fork_exit() no longer exists. Instead, MD code ensures that new threads have the correct state when they are created. Also, we no longer try to fixup the idlethreads for APs in MI code. Instead, each arch sets the initial curthread and adjusts the state of the idle thread it borrows in order to perform the initial context switch. This change is largely a big NOP, but the cleaner separation it provides will allow for more efficient alternative locking schemes in other parts of the kernel (bare critical sections rather than per-CPU spin mutexes for per-CPU data for example). Reviewed by: grehan, cognet, arch@, others Tested on: i386, alpha, sparc64, powerpc, arm, possibly more
2005-04-04 21:53:56 +00:00
spinlock_exit();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
while (m->mtx_lock != MTX_UNOWNED) {
if (i++ < 10000000) {
cpu_spinwait();
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
continue;
}
if (i < 60000000)
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
DELAY(1);
else if (!kdb_active && !panicstr) {
printf("spin lock %s held by %p for > 5 seconds\n",
m->mtx_object.lo_name, (void *)m->mtx_lock);
#ifdef WITNESS
witness_display_spinlock(&m->mtx_object,
mtx_owner(m));
#endif
panic("spin lock held too long");
}
cpu_spinwait();
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
Divorce critical sections from spinlocks. Critical sections as denoted by critical_enter() and critical_exit() are now solely a mechanism for deferring kernel preemptions. They no longer have any affect on interrupts. This means that standalone critical sections are now very cheap as they are simply unlocked integer increments and decrements for the common case. Spin mutexes now use a separate KPI implemented in MD code: spinlock_enter() and spinlock_exit(). This KPI is responsible for providing whatever MD guarantees are needed to ensure that a thread holding a spin lock won't be preempted by any other code that will try to lock the same lock. For now all archs continue to block interrupts in a "spinlock section" as they did formerly in all critical sections. Note that I've also taken this opportunity to push a few things into MD code rather than MI. For example, critical_fork_exit() no longer exists. Instead, MD code ensures that new threads have the correct state when they are created. Also, we no longer try to fixup the idlethreads for APs in MI code. Instead, each arch sets the initial curthread and adjusts the state of the idle thread it borrows in order to perform the initial context switch. This change is largely a big NOP, but the cleaner separation it provides will allow for more efficient alternative locking schemes in other parts of the kernel (bare critical sections rather than per-CPU spin mutexes for per-CPU data for example). Reviewed by: grehan, cognet, arch@, others Tested on: i386, alpha, sparc64, powerpc, arm, possibly more
2005-04-04 21:53:56 +00:00
spinlock_enter();
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR1(KTR_LOCK, "_mtx_lock_spin: %p spin done", m);
return;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
#endif /* SMP */
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* _mtx_unlock_sleep: the tougher part of releasing an MTX_DEF lock.
*
* We are only called here if the lock is recursed or contested (i.e. we
* need to wake up a blocked thread).
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
void
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
_mtx_unlock_sleep(struct mtx *m, int opts, const char *file, int line)
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
{
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
struct turnstile *ts;
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#ifndef PREEMPTION
struct thread *td, *td1;
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
if (mtx_recursed(m)) {
if (--(m->mtx_recurse) == 0)
atomic_clear_ptr(&m->mtx_lock, MTX_RECURSED);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR1(KTR_LOCK, "_mtx_unlock_sleep: %p unrecurse", m);
return;
}
turnstile_lock(&m->mtx_object);
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
ts = turnstile_lookup(&m->mtx_object);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR1(KTR_LOCK, "_mtx_unlock_sleep: %p contested", m);
#if defined(SMP) && !defined(NO_ADAPTIVE_MUTEXES)
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
if (ts == NULL) {
_release_lock_quick(m);
if (LOCK_LOG_TEST(&m->mtx_object, opts))
CTR1(KTR_LOCK, "_mtx_unlock_sleep: %p no sleepers", m);
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
turnstile_release(&m->mtx_object);
return;
}
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
#else
MPASS(ts != NULL);
#endif
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#ifndef PREEMPTION
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
/* XXX */
td1 = turnstile_head(ts, TS_EXCLUSIVE_QUEUE);
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#endif
#ifdef MUTEX_WAKE_ALL
turnstile_broadcast(ts, TS_EXCLUSIVE_QUEUE);
_release_lock_quick(m);
#else
if (turnstile_signal(ts, TS_EXCLUSIVE_QUEUE)) {
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
_release_lock_quick(m);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR1(KTR_LOCK, "_mtx_unlock_sleep: %p not held", m);
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
} else {
m->mtx_lock = MTX_CONTESTED;
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
CTR1(KTR_LOCK, "_mtx_unlock_sleep: %p still contested",
m);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
}
#endif
turnstile_unpend(ts, TS_EXCLUSIVE_LOCK);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#ifndef PREEMPTION
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
/*
* XXX: This is just a hack until preemption is done. However,
* once preemption is done we need to either wrap the
* turnstile_signal() and release of the actual lock in an
* extra critical section or change the preemption code to
* always just set a flag and never do instant-preempts.
*/
td = curthread;
if (td->td_critnest > 0 || td1->td_priority >= td->td_priority)
return;
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
mtx_lock_spin(&sched_lock);
if (!TD_IS_RUNNING(td1)) {
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef notyet
if (td->td_ithd != NULL) {
struct ithd *it = td->td_ithd;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
if (it->it_interrupted) {
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR2(KTR_LOCK,
"_mtx_unlock_sleep: %p interrupted %p",
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
it, it->it_interrupted);
intr_thd_fixup(it);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
#endif
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR2(KTR_LOCK,
"_mtx_unlock_sleep: %p switching out lock=%p", m,
(void *)m->mtx_lock);
mi_switch(SW_INVOL, NULL);
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (LOCK_LOG_TEST(&m->mtx_object, opts))
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
CTR2(KTR_LOCK, "_mtx_unlock_sleep: %p resuming lock=%p",
m, (void *)m->mtx_lock);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_unlock_spin(&sched_lock);
Implement preemption of kernel threads natively in the scheduler rather than as one-off hacks in various other parts of the kernel: - Add a function maybe_preempt() that is called from sched_add() to determine if a thread about to be added to a run queue should be preempted to directly. If it is not safe to preempt or if the new thread does not have a high enough priority, then the function returns false and sched_add() adds the thread to the run queue. If the thread should be preempted to but the current thread is in a nested critical section, then the flag TDF_OWEPREEMPT is set and the thread is added to the run queue. Otherwise, mi_switch() is called immediately and the thread is never added to the run queue since it is switch to directly. When exiting an outermost critical section, if TDF_OWEPREEMPT is set, then clear it and call mi_switch() to perform the deferred preemption. - Remove explicit preemption from ithread_schedule() as calling setrunqueue() now does all the correct work. This also removes the do_switch argument from ithread_schedule(). - Do not use the manual preemption code in mtx_unlock if the architecture supports native preemption. - Don't call mi_switch() in a loop during shutdown to give ithreads a chance to run if the architecture supports native preemption since the ithreads will just preempt DELAY(). - Don't call mi_switch() from the page zeroing idle thread for architectures that support native preemption as it is unnecessary. - Native preemption is enabled on the same archs that supported ithread preemption, namely alpha, i386, and amd64. This change should largely be a NOP for the default case as committed except that we will do fewer context switches in a few cases and will avoid the run queues completely when preempting. Approved by: scottl (with his re@ hat)
2004-07-02 20:21:44 +00:00
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
return;
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* All the unlocking of MTX_SPIN locks is done inline.
2002-10-23 10:26:54 +00:00
* See the _rel_spin_lock() macro for the details.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
/*
* The backing function for the INVARIANTS-enabled mtx_assert()
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
#ifdef INVARIANT_SUPPORT
void
_mtx_assert(struct mtx *m, int what, const char *file, int line)
{
if (panicstr != NULL || dumping)
return;
switch (what) {
case MA_OWNED:
case MA_OWNED | MA_RECURSED:
case MA_OWNED | MA_NOTRECURSED:
if (!mtx_owned(m))
panic("mutex %s not owned at %s:%d",
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
m->mtx_object.lo_name, file, line);
if (mtx_recursed(m)) {
if ((what & MA_NOTRECURSED) != 0)
panic("mutex %s recursed at %s:%d",
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
m->mtx_object.lo_name, file, line);
} else if ((what & MA_RECURSED) != 0) {
panic("mutex %s unrecursed at %s:%d",
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
m->mtx_object.lo_name, file, line);
}
break;
case MA_NOTOWNED:
if (mtx_owned(m))
panic("mutex %s owned at %s:%d",
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
m->mtx_object.lo_name, file, line);
break;
default:
panic("unknown mtx_assert at %s:%d", file, line);
}
}
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* The MUTEX_DEBUG-enabled mtx_validate()
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
*
* Most of these checks have been moved off into the LO_INITIALIZED flag
* maintained by the witness code.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef MUTEX_DEBUG
2002-03-19 21:25:46 +00:00
void mtx_validate(struct mtx *);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
void
mtx_validate(struct mtx *m)
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
{
/*
* XXX: When kernacc() does not require Giant we can reenable this check
*/
#ifdef notyet
/*
* Can't call kernacc() from early init386(), especially when
* initializing Giant mutex, because some stuff in kernacc()
* requires Giant itself.
2002-10-23 10:26:54 +00:00
*/
2001-08-24 22:53:45 +00:00
if (!cold)
if (!kernacc((caddr_t)m, sizeof(m),
VM_PROT_READ | VM_PROT_WRITE))
panic("Can't read and write to mutex %p", m);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#endif
}
#endif
/*
* General init routine used by the MTX_SYSINIT() macro.
*/
void
mtx_sysinit(void *arg)
{
struct mtx_args *margs = arg;
mtx_init(margs->ma_mtx, margs->ma_desc, NULL, margs->ma_opts);
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
* Mutex initialization routine; initialize lock `m' of type contained in
* `opts' with options contained in `opts' and name `name.' The optional
* lock type `type' is used as a general lock category name for use with
* witness.
2002-10-23 10:26:54 +00:00
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
void
mtx_init(struct mtx *m, const char *name, const char *type, int opts)
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
{
struct lock_class *class;
int flags;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
MPASS((opts & ~(MTX_SPIN | MTX_QUIET | MTX_RECURSE |
MTX_NOWITNESS | MTX_DUPOK)) == 0);
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
#ifdef MUTEX_DEBUG
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/* Diagnostic and error correction */
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
mtx_validate(m);
#endif
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
/* Determine lock class and lock flags. */
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (opts & MTX_SPIN)
class = &lock_class_mtx_spin;
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
else
class = &lock_class_mtx_sleep;
flags = 0;
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (opts & MTX_QUIET)
flags |= LO_QUIET;
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (opts & MTX_RECURSE)
flags |= LO_RECURSABLE;
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if ((opts & MTX_NOWITNESS) == 0)
flags |= LO_WITNESS;
if (opts & MTX_DUPOK)
flags |= LO_DUPOK;
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/* Initialize mutex. */
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
m->mtx_lock = MTX_UNOWNED;
m->mtx_recurse = 0;
#ifdef MUTEX_PROFILING
m->mtx_acqtime = 0;
m->mtx_filename = NULL;
m->mtx_lineno = 0;
m->mtx_contest_holding = 0;
m->mtx_contest_locking = 0;
#endif
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
lock_init(&m->mtx_object, class, name, type, flags);
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
}
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
/*
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
* Remove lock `m' from all_mtx queue. We don't allow MTX_QUIET to be
* passed in as a flag here because if the corresponding mtx_init() was
* called with MTX_QUIET set, then it will already be set in the mutex's
* flags.
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
*/
- Make the mutex code almost completely machine independent. This greatly reducues the maintenance load for the mutex code. The only MD portions of the mutex code are in machine/mutex.h now, which include the assembly macros for handling mutexes as well as optionally overriding the mutex micro-operations. For example, we use optimized micro-ops on the x86 platform #ifndef I386_CPU. - Change the behavior of the SMP_DEBUG kernel option. In the new code, mtx_assert() only depends on INVARIANTS, allowing other kernel developers to have working mutex assertiions without having to include all of the mutex debugging code. The SMP_DEBUG kernel option has been renamed to MUTEX_DEBUG and now just controls extra mutex debugging code. - Abolish the ugly mtx_f hack. Instead, we dynamically allocate seperate mtx_debug structures on the fly in mtx_init, except for mutexes that are initiated very early in the boot process. These mutexes are declared using a special MUTEX_DECLARE() macro, and use a new flag MTX_COLD when calling mtx_init. This is still somewhat hackish, but it is less evil than the mtx_f filler struct, and the mtx struct is now the same size with and without mutex debugging code. - Add some micro-micro-operation macros for doing the actual atomic operations on the mutex mtx_lock field to make it easier for other archs to override/optimize mutex ops if needed. These new tiny ops also clean up the code in some places by replacing long atomic operation function calls that spanned 2-3 lines with a short 1-line macro call. - Don't call mi_switch() from mtx_enter_hard() when we block while trying to obtain a sleep mutex. Calling mi_switch() would bogusly release Giant before switching to the next process. Instead, inline most of the code from mi_switch() in the mtx_enter_hard() function. Note that when we finally kill Giant we can back this out and go back to calling mi_switch().
2000-10-20 07:26:37 +00:00
void
mtx_destroy(struct mtx *m)
{
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
if (!mtx_owned(m))
MPASS(mtx_unowned(m));
else {
MPASS((m->mtx_lock & (MTX_RECURSED|MTX_CONTESTED)) == 0);
/* Perform the non-mtx related part of mtx_unlock_spin(). */
2006-01-24 22:24:05 +00:00
if (LOCK_CLASS(&m->mtx_object) == &lock_class_mtx_spin)
spinlock_exit();
Rework the witness code to work with sx locks as well as mutexes. - Introduce lock classes and lock objects. Each lock class specifies a name and set of flags (or properties) shared by all locks of a given type. Currently there are three lock classes: spin mutexes, sleep mutexes, and sx locks. A lock object specifies properties of an additional lock along with a lock name and all of the extra stuff needed to make witness work with a given lock. This abstract lock stuff is defined in sys/lock.h. The lockmgr constants, types, and prototypes have been moved to sys/lockmgr.h. For temporary backwards compatability, sys/lock.h includes sys/lockmgr.h. - Replace proc->p_spinlocks with a per-CPU list, PCPU(spinlocks), of spin locks held. By making this per-cpu, we do not have to jump through magic hoops to deal with sched_lock changing ownership during context switches. - Replace proc->p_heldmtx, formerly a list of held sleep mutexes, with proc->p_sleeplocks, which is a list of held sleep locks including sleep mutexes and sx locks. - Add helper macros for logging lock events via the KTR_LOCK KTR logging level so that the log messages are consistent. - Add some new flags that can be passed to mtx_init(): - MTX_NOWITNESS - specifies that this lock should be ignored by witness. This is used for the mutex that blocks a sx lock for example. - MTX_QUIET - this is not new, but you can pass this to mtx_init() now and no events will be logged for this lock, so that one doesn't have to change all the individual mtx_lock/unlock() operations. - All lock objects maintain an initialized flag. Use this flag to export a mtx_initialized() macro that can be safely called from drivers. Also, we on longer walk the all_mtx list if MUTEX_DEBUG is defined as witness performs the corresponding checks using the initialized flag. - The lock order reversal messages have been improved to output slightly more accurate file and line numbers.
2001-03-28 09:03:24 +00:00
/* Tell witness this isn't locked to make it happy. */
Change the preemption code for software interrupt thread schedules and mutex releases to not require flags for the cases when preemption is not allowed: The purpose of the MTX_NOSWITCH and SWI_NOSWITCH flags is to prevent switching to a higher priority thread on mutex releease and swi schedule, respectively when that switch is not safe. Now that the critical section API maintains a per-thread nesting count, the kernel can easily check whether or not it should switch without relying on flags from the programmer. This fixes a few bugs in that all current callers of swi_sched() used SWI_NOSWITCH, when in fact, only the ones called from fast interrupt handlers and the swi_sched of softclock needed this flag. Note that to ensure that swi_sched()'s in clock and fast interrupt handlers do not switch, these handlers have to be explicitly wrapped in critical_enter/exit pairs. Presently, just wrapping the handlers is sufficient, but in the future with the fully preemptive kernel, the interrupt must be EOI'd before critical_exit() is called. (critical_exit() can switch due to a deferred preemption in a fully preemptive kernel.) I've tested the changes to the interrupt code on i386 and alpha. I have not tested ia64, but the interrupt code is almost identical to the alpha code, so I expect it will work fine. PowerPC and ARM do not yet have interrupt code in the tree so they shouldn't be broken. Sparc64 is broken, but that's been ok'd by jake and tmm who will be fixing the interrupt code for sparc64 shortly. Reviewed by: peter Tested on: i386, alpha
2002-01-05 08:47:13 +00:00
WITNESS_UNLOCK(&m->mtx_object, LOP_EXCLUSIVE, __FILE__,
__LINE__);
}
lock_destroy(&m->mtx_object);
}
Add mtx_lock_giant() and mtx_unlock_giant() wrappers for sysctl management of Giant during the Giant unwinding phase, and start work on instrumenting Giant for the file and proc mutexes. These wrappers allow developers to turn on and off Giant around various subsystems. DEVELOPERS SHOULD NEVER TURN OFF GIANT AROUND A SUBSYSTEM JUST BECAUSE THE SYSCTL EXISTS! General developers should only considering turning on Giant for a subsystem whos default is off (to help track down bugs). Only developers working on particular subsystems who know what they are doing should consider turning off Giant. These wrappers will greatly improve our ability to unwind Giant and test the kernel on a (mostly) subsystem by subsystem basis. They allow Giant unwinding developers (GUDs) to emplace appropriate subsystem and structural mutexes in the main tree and then request that the larger community test the work by turning off Giant around the subsystem(s), without the larger community having to mess around with patches. These wrappers also allow GUDs to boot into a (more likely to be) working system in the midst of their unwinding work and to test that work under more controlled circumstances. There is a master sysctl, kern.giant.all, which defaults to 0 (off). If turned on it overrides *ALL* other kern.giant sysctls and forces Giant to be turned on for all wrapped subsystems. If turned off then Giant around individual subsystems are controlled by various other kern.giant.XXX sysctls. Code which overlaps multiple subsystems must have all related subsystem Giant sysctls turned off in order to run without Giant.
2001-10-26 20:48:04 +00:00
/*
* Intialize the mutex code and system mutexes. This is called from the MD
* startup code prior to mi_startup(). The per-CPU data space needs to be
* setup before this is called.
*/
void
mutex_init(void)
{
Add an implementation of turnstiles and change the sleep mutex code to use turnstiles to implement blocking isntead of implementing a thread queue directly. These turnstiles are somewhat similar to those used in Solaris 7 as described in Solaris Internals but are also different. Turnstiles do not come out of a fixed-sized pool. Rather, each thread is assigned a turnstile when it is created that it frees when it is destroyed. When a thread blocks on a lock, it donates its turnstile to that lock to serve as queue of blocked threads. The queue associated with a given lock is found by a lookup in a simple hash table. The turnstile itself is protected by a lock associated with its entry in the hash table. This means that sched_lock is no longer needed to contest on a mutex. Instead, sched_lock is only used when manipulating run queues or thread priorities. Turnstiles also implement priority propagation inherently. Currently turnstiles only support mutexes. Eventually, however, turnstiles may grow two queue's to support a non-sleepable reader/writer lock implementation. For more details, see the comments in sys/turnstile.h and kern/subr_turnstile.c. The two primary advantages from the turnstile code include: 1) the size of struct mutex shrinks by four pointers as it no longer stores the thread queue linkages directly, and 2) less contention on sched_lock in SMP systems including the ability for multiple CPUs to contend on different locks simultaneously (not that this last detail is necessarily that much of a big win). Note that 1) means that this commit is a kernel ABI breaker, so don't mix old modules with a new kernel and vice versa. Tested on: i386 SMP, sparc64 SMP, alpha SMP
2003-11-11 22:07:29 +00:00
/* Setup turnstiles so that sleep mutexes work. */
init_turnstiles();
/*
* Initialize mutexes.
*/
mtx_init(&Giant, "Giant", NULL, MTX_DEF | MTX_RECURSE);
mtx_init(&sched_lock, "sched lock", NULL, MTX_SPIN | MTX_RECURSE);
mtx_init(&proc0.p_mtx, "process lock", NULL, MTX_DEF | MTX_DUPOK);
mtx_init(&devmtx, "cdev", NULL, MTX_DEF);
mtx_lock(&Giant);
}
#ifdef DDB
void
db_show_mtx(struct lock_object *lock)
{
struct thread *td;
struct mtx *m;
m = (struct mtx *)lock;
db_printf(" flags: {");
if (LOCK_CLASS(lock) == &lock_class_mtx_spin)
db_printf("SPIN");
else
db_printf("DEF");
if (m->mtx_object.lo_flags & LO_RECURSABLE)
db_printf(", RECURSE");
if (m->mtx_object.lo_flags & LO_DUPOK)
db_printf(", DUPOK");
db_printf("}\n");
db_printf(" state: {");
if (mtx_unowned(m))
db_printf("UNOWNED");
else {
db_printf("OWNED");
if (m->mtx_lock & MTX_CONTESTED)
db_printf(", CONTESTED");
if (m->mtx_lock & MTX_RECURSED)
db_printf(", RECURSED");
}
db_printf("}\n");
if (!mtx_unowned(m)) {
td = mtx_owner(m);
db_printf(" owner: %p (tid %d, pid %d, \"%s\")\n", td,
td->td_tid, td->td_proc->p_pid, td->td_proc->p_comm);
if (mtx_recursed(m))
db_printf(" recursed: %d\n", m->mtx_recurse);
}
}
#endif