freebsd-dev/sys/mips/conf/ERL

215 lines
8.3 KiB
Plaintext
Raw Normal View History

#
# ERL - EdgeRouter Lite kernel config
# Based on configuration from http://rtfm.net/FreeBSD/ERL
#
# For more information on this file, please read the config(5) manual page,
# and/or the handbook section on Kernel Configuration Files:
#
# https://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
#
# The handbook is also available locally in /usr/share/doc/handbook
# if you've installed the doc distribution, otherwise always see the
# FreeBSD World Wide Web server (https://www.FreeBSD.org/) for the
# latest information.
#
# An exhaustive list of options and more detailed explanations of the
# device lines is also present in the ../../conf/NOTES and NOTES files.
# If you are in doubt as to the purpose or necessity of a line, check first
# in NOTES.
#
# $FreeBSD$
ident ERL
makeoptions ARCH_FLAGS="-march=octeon+"
makeoptions LDSCRIPT_NAME=ldscript.mips.octeon1
makeoptions KERNLOADADDR=0xffffffff80100000
# We don't need to build a trampolined version of the kernel.
makeoptions WITHOUT_KERNEL_TRAMPOLINE=1
include "../cavium/std.octeon1"
hints "OCTEON1.hints" #Default places to look for devices.
makeoptions DEBUG=-g #Build kernel with gdb(1) debug symbols
# Board-specific support that cannot be auto-detected at runtime.
#options OCTEON_VENDOR_LANNER # Support for Lanner boards.
#options OCTEON_VENDOR_RADISYS # Support for Radisys boards.
options OCTEON_VENDOR_UBIQUITI # Support for Ubiquiti boards.
#options OCTEON_VENDOR_GEFES # Support for GE LANIC boards
#options OCTEON_BOARD_CAPK_0100ND # Support for CAPK-0100nd.
# Compile for a specified Octeon model. If not specified, support for
# detection at runtime will be used instead, which may give inferior
# performance.
#
# See sys/contrib/octeon-sdk/octeon-model.h for possible values.
options OCTEON_MODEL=OCTEON_CN50XX_PASS1
options SCHED_ULE # ULE scheduler
options PREEMPTION # Enable kernel thread preemption
options INET # InterNETworking
options INET6 # IPv6 communications protocols
options IPSEC # IP (v4/v6) security
options TCP_HHOOK # hhook(9) framework for TCP
options SCTP # Stream Control Transmission Protocol
options FFS # Berkeley Fast Filesystem
options SOFTUPDATES # Enable FFS soft updates support
options UFS_ACL # Support for access control lists
options UFS_DIRHASH # Improve performance on big directories
options UFS_GJOURNAL # Enable gjournal-based UFS journaling
options MD_ROOT # MD is a potential root device
options NFSCL # Network Filesystem Client
options NFSD # Network Filesystem Server
options NFSLOCKD # Network Lock Manager
options NFS_ROOT # NFS usable as /, requires NFSCL
options MSDOSFS # MSDOS Filesystem
options CD9660 # ISO 9660 Filesystem
options PROCFS # Process filesystem (requires PSEUDOFS)
options PSEUDOFS # Pseudo-filesystem framework
options GEOM_PART_GPT # GUID Partition Tables.
options GEOM_LABEL # Provides labelization
options COMPAT_FREEBSD32 # Compatible with o32 binaries
options COMPAT_FREEBSD10 # Compatible with FreeBSD10
options COMPAT_FREEBSD11 # Compatible with FreeBSD11
options COMPAT_FREEBSD12 # Compatible with FreeBSD12
options SCSI_DELAY=5000 # Delay (in ms) before probing SCSI
options KTRACE # ktrace(1) support
options STACK # stack(9) support
options SYSVSHM # SYSV-style shared memory
options SYSVMSG # SYSV-style message queues
options SYSVSEM # SYSV-style semaphores
options _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
options PRINTF_BUFR_SIZE=128 # Prevent printf output being interspersed.
options HWPMC_HOOKS # Necessary kernel hooks for hwpmc(4)
options AUDIT # Security event auditing
options MAC # TrustedBSD MAC Framework
options KDTRACE_FRAME # Ensure frames are compiled in
options KDTRACE_HOOKS # Kernel DTrace hooks
options DDB_CTF # Kernel ELF linker loads CTF data
options INCLUDE_CONFIG_FILE # Include this file in kernel
options TMPFS # Temporary file system
options CAPABILITY_MODE # Capsicum capability mode
options CAPABILITIES # Capsicum capabilities
# Debugging for use in -current
#options KDB # Enable kernel debugger support.
options DDB # Support DDB.
#options GDB # Support remote GDB.
#options DEADLKRES # Enable the deadlock resolver
#options INVARIANTS # Enable calls of extra sanity checking
#options INVARIANT_SUPPORT # Extra sanity checks of internal structures, required by INVARIANTS
#options WITNESS # Enable checks to detect deadlocks and cycles
#options WITNESS_SKIPSPIN # Don't run witness on spinlocks for speed
#options MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
# Make an SMP-capable kernel by default
options SMP # Symmetric MultiProcessor Kernel
options ROOTDEVNAME=\"ufs:da0s2a\" # Default root filesystem.
# ATA/SCSI peripherals
device scbus # SCSI bus (required for ATA/SCSI)
device ch # SCSI media changers
device da # Direct Access (disks)
device sa # Sequential Access (tape etc)
device cd # CD
device pass # Passthrough device (direct ATA/SCSI access)
device ses # Enclosure Services (SES and SAF-TE)
# Serial (COM) ports
device uart # Generic UART driver
# On-board Cavium Octeon Ethernet.
# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
device octe
# Cavium Octeon management Ethernet.
device octm
# Switch PHY support for the octe driver. These currently present a VLAN per
# physical port, but may eventually provide support for DSA or similar instead.
#device mv88e61xxphy # Marvell 88E61XX
# Wireless NIC cards
device wlan # 802.11 support
options IEEE80211_DEBUG # enable debug msgs
options IEEE80211_SUPPORT_MESH # enable 802.11s draft support
device wlan_wep # 802.11 WEP support
device wlan_ccmp # 802.11 CCMP support
device wlan_tkip # 802.11 TKIP support
device wlan_amrr # AMRR transmit rate control algorithm
#device ath # Atheros NIC's
#device ath_pci # Atheros pci/cardbus glue
#device ath_hal # pci/cardbus chip support
#device ath_rate_sample # SampleRate tx rate control for ath
# Pseudo devices.
device loop # Network loopback
device ether # Ethernet support
device vlan # 802.1Q VLAN support
tun/tap: merge and rename to `tuntap` tun(4) and tap(4) share the same general management interface and have a lot in common. Bugs exist in tap(4) that have been fixed in tun(4), and vice-versa. Let's reduce the maintenance requirements by merging them together and using flags to differentiate between the three interface types (tun, tap, vmnet). This fixes a couple of tap(4)/vmnet(4) issues right out of the gate: - tap devices may no longer be destroyed while they're open [0] - VIMAGE issues already addressed in tun by kp [0] emaste had removed an easy-panic-button in r240938 due to devdrn blocking. A naive glance over this leads me to believe that this isn't quite complete -- destroy_devl will only block while executing d_* functions, but doesn't block the device from being destroyed while a process has it open. The latter is the intent of the condvar in tun, so this is "fixed" (for certain definitions of the word -- it wasn't really broken in tap, it just wasn't quite ideal). ifconfig(8) also grew the ability to map an interface name to a kld, so that `ifconfig {tun,tap}0` can continue to autoload the correct module, and `ifconfig vmnet0 create` will now autoload the correct module. This is a low overhead addition. (MFC commentary) This may get MFC'd if many bugs in tun(4)/tap(4) are discovered after this, and how critical they are. Changes after this are likely easily MFC'd without taking this merge, but the merge will be easier. I have no plans to do this MFC as of now. Reviewed by: bcr (manpages), tuexen (testing, syzkaller/packetdrill) Input also from: melifaro Relnotes: yes Differential Revision: https://reviews.freebsd.org/D20044
2019-05-08 02:32:11 +00:00
device tuntap # Packet tunnel.
device md # Memory "disks"
device gif # IPv6 and IPv4 tunneling
device firmware # firmware assist module
# The `bpf' device enables the Berkeley Packet Filter.
# Be aware of the administrative consequences of enabling this!
# Note that 'bpf' is required for DHCP.
device bpf # Berkeley packet filter
# Hardware watchdog support.
#device octeon_wdog # Octeon hardware watchdog
# USB support
options USB_DEBUG # enable debug msgs
device octusb # Cavium Octeon on-board USB interface (USB 2.0)
device uhci # UHCI PCI->USB interface
device ohci # OHCI PCI->USB interface
device ehci # EHCI PCI->USB interface (USB 2.0)
device usb # USB Bus (required)
#device udbp # USB Double Bulk Pipe devices
device uhid # "Human Interface Devices"
device ulpt # Printer
device umass # Disks/Mass storage - Requires scbus and da
device ums # Mouse
device urio # Diamond Rio 500 MP3 player
# USB Serial devices
device u3g # USB-based 3G modems (Option, Huawei, Sierra)
device uark # Technologies ARK3116 based serial adapters
device ubsa # Belkin F5U103 and compatible serial adapters
device uftdi # For FTDI usb serial adapters
device uipaq # Some WinCE based devices
device uplcom # Prolific PL-2303 serial adapters
device uslcom # SI Labs CP2101/CP2102 serial adapters
device uvisor # Visor and Palm devices
device uvscom # USB serial support for DDI pocket's PHS
# USB Ethernet, requires miibus
device miibus # MII bus support
device aue # ADMtek USB Ethernet
device axe # ASIX Electronics USB Ethernet
device cdce # Generic USB over Ethernet
device cue # CATC USB Ethernet
device kue # Kawasaki LSI USB Ethernet
device rue # RealTek RTL8150 USB Ethernet
device udav # Davicom DM9601E USB
# USB Wireless
device rum # Ralink Technology RT2501USB wireless NICs
device uath # Atheros AR5523 wireless NICs
device ural # Ralink Technology RT2500USB wireless NICs
device zyd # ZyDAS zd1211/zd1211b wireless NICs
# crypto subsystem
device crypto # core crypto support (required for IPSEC)
device cryptodev # /dev/crypto for access to h/w
device cryptocteon # Octeon coprocessor 2 crypto offload
# GPIO support
#device gpio
# PMC support
#device hwpmc