freebsd-dev/sys/net/ieee8023ad_lacp.h

354 lines
9.2 KiB
C
Raw Normal View History

/* $NetBSD: ieee8023ad_impl.h,v 1.2 2005/12/10 23:21:39 elad Exp $ */
/*-
* SPDX-License-Identifier: BSD-2-Clause-NetBSD
*
* Copyright (c)2005 YAMAMOTO Takashi,
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* IEEE802.3ad LACP
*
* implementation details.
*/
#define LACP_TIMER_CURRENT_WHILE 0
#define LACP_TIMER_PERIODIC 1
#define LACP_TIMER_WAIT_WHILE 2
#define LACP_NTIMER 3
#define LACP_TIMER_ARM(port, timer, val) \
(port)->lp_timer[(timer)] = (val)
#define LACP_TIMER_DISARM(port, timer) \
(port)->lp_timer[(timer)] = 0
#define LACP_TIMER_ISARMED(port, timer) \
((port)->lp_timer[(timer)] > 0)
/*
* IEEE802.3ad LACP
*
* protocol definitions.
*/
#define LACP_STATE_ACTIVITY (1<<0)
#define LACP_STATE_TIMEOUT (1<<1)
#define LACP_STATE_AGGREGATION (1<<2)
#define LACP_STATE_SYNC (1<<3)
#define LACP_STATE_COLLECTING (1<<4)
#define LACP_STATE_DISTRIBUTING (1<<5)
#define LACP_STATE_DEFAULTED (1<<6)
#define LACP_STATE_EXPIRED (1<<7)
#define LACP_PORT_NTT 0x00000001
#define LACP_PORT_MARK 0x00000002
#define LACP_STATE_BITS \
"\020" \
"\001ACTIVITY" \
"\002TIMEOUT" \
"\003AGGREGATION" \
"\004SYNC" \
"\005COLLECTING" \
"\006DISTRIBUTING" \
"\007DEFAULTED" \
"\010EXPIRED"
#ifdef _KERNEL
/*
* IEEE802.3 slow protocols
*
* protocol (on-wire) definitions.
*
* XXX should be elsewhere.
*/
#define SLOWPROTOCOLS_SUBTYPE_LACP 1
#define SLOWPROTOCOLS_SUBTYPE_MARKER 2
struct slowprothdr {
uint8_t sph_subtype;
uint8_t sph_version;
} __packed;
/*
* TLV on-wire structure.
*/
struct tlvhdr {
uint8_t tlv_type;
uint8_t tlv_length;
/* uint8_t tlv_value[]; */
} __packed;
/*
* ... and our implementation.
*/
#define TLV_SET(tlv, type, length) \
do { \
(tlv)->tlv_type = (type); \
(tlv)->tlv_length = sizeof(*tlv) + (length); \
} while (/*CONSTCOND*/0)
struct tlv_template {
uint8_t tmpl_type;
uint8_t tmpl_length;
};
struct lacp_systemid {
uint16_t lsi_prio;
uint8_t lsi_mac[6];
} __packed;
struct lacp_portid {
uint16_t lpi_prio;
uint16_t lpi_portno;
} __packed;
struct lacp_peerinfo {
struct lacp_systemid lip_systemid;
uint16_t lip_key;
struct lacp_portid lip_portid;
uint8_t lip_state;
uint8_t lip_resv[3];
} __packed;
struct lacp_collectorinfo {
uint16_t lci_maxdelay;
uint8_t lci_resv[12];
} __packed;
struct lacpdu {
struct ether_header ldu_eh;
struct slowprothdr ldu_sph;
struct tlvhdr ldu_tlv_actor;
struct lacp_peerinfo ldu_actor;
struct tlvhdr ldu_tlv_partner;
struct lacp_peerinfo ldu_partner;
struct tlvhdr ldu_tlv_collector;
struct lacp_collectorinfo ldu_collector;
struct tlvhdr ldu_tlv_term;
uint8_t ldu_resv[50];
} __packed;
/*
* IEEE802.3ad marker protocol
*
* protocol (on-wire) definitions.
*/
struct lacp_markerinfo {
uint16_t mi_rq_port;
uint8_t mi_rq_system[ETHER_ADDR_LEN];
uint32_t mi_rq_xid;
uint8_t mi_pad[2];
} __packed;
struct markerdu {
struct ether_header mdu_eh;
struct slowprothdr mdu_sph;
struct tlvhdr mdu_tlv;
struct lacp_markerinfo mdu_info;
struct tlvhdr mdu_tlv_term;
uint8_t mdu_resv[90];
} __packed;
#define MARKER_TYPE_INFO 0x01
#define MARKER_TYPE_RESPONSE 0x02
enum lacp_selected {
LACP_UNSELECTED,
LACP_STANDBY, /* not used in this implementation */
LACP_SELECTED,
};
enum lacp_mux_state {
LACP_MUX_DETACHED,
LACP_MUX_WAITING,
LACP_MUX_ATTACHED,
LACP_MUX_COLLECTING,
LACP_MUX_DISTRIBUTING,
};
#define LACP_MAX_PORTS 32
struct lacp_numa {
int count;
struct lacp_port *map[LACP_MAX_PORTS];
};
struct lacp_portmap {
int pm_count;
int pm_num_dom;
struct lacp_numa pm_numa[MAXMEMDOM];
struct lacp_port *pm_map[LACP_MAX_PORTS];
};
struct lacp_port {
TAILQ_ENTRY(lacp_port) lp_dist_q;
LIST_ENTRY(lacp_port) lp_next;
struct lacp_softc *lp_lsc;
struct lagg_port *lp_lagg;
struct ifnet *lp_ifp;
struct lacp_peerinfo lp_partner;
struct lacp_peerinfo lp_actor;
struct lacp_markerinfo lp_marker;
#define lp_state lp_actor.lip_state
#define lp_key lp_actor.lip_key
#define lp_systemid lp_actor.lip_systemid
struct timeval lp_last_lacpdu;
int lp_lacpdu_sent;
enum lacp_mux_state lp_mux_state;
enum lacp_selected lp_selected;
int lp_flags;
u_int lp_media; /* XXX redundant */
int lp_timer[LACP_NTIMER];
struct ifmultiaddr *lp_ifma;
struct lacp_aggregator *lp_aggregator;
};
struct lacp_aggregator {
TAILQ_ENTRY(lacp_aggregator) la_q;
int la_refcnt; /* num of ports which selected us */
int la_nports; /* num of distributing ports */
TAILQ_HEAD(, lacp_port) la_ports; /* distributing ports */
struct lacp_peerinfo la_partner;
struct lacp_peerinfo la_actor;
int la_pending; /* number of ports in wait_while */
};
struct lacp_softc {
struct lagg_softc *lsc_softc;
struct mtx lsc_mtx;
struct lacp_aggregator *lsc_active_aggregator;
TAILQ_HEAD(, lacp_aggregator) lsc_aggregators;
boolean_t lsc_suppress_distributing;
struct callout lsc_transit_callout;
struct callout lsc_callout;
LIST_HEAD(, lacp_port) lsc_ports;
struct lacp_portmap lsc_pmap[2];
volatile u_int lsc_activemap;
u_int32_t lsc_hashkey;
struct {
u_int32_t lsc_rx_test;
u_int32_t lsc_tx_test;
} lsc_debug;
u_int32_t lsc_strict_mode;
boolean_t lsc_fast_timeout; /* if set, fast timeout */
};
#define LACP_TYPE_ACTORINFO 1
#define LACP_TYPE_PARTNERINFO 2
#define LACP_TYPE_COLLECTORINFO 3
/* timeout values (in sec) */
#define LACP_FAST_PERIODIC_TIME (1)
#define LACP_SLOW_PERIODIC_TIME (30)
#define LACP_SHORT_TIMEOUT_TIME (3 * LACP_FAST_PERIODIC_TIME)
#define LACP_LONG_TIMEOUT_TIME (3 * LACP_SLOW_PERIODIC_TIME)
#define LACP_CHURN_DETECTION_TIME (60)
#define LACP_AGGREGATE_WAIT_TIME (2)
#define LACP_TRANSIT_DELAY 3000 /* in msec */
#define LACP_STATE_EQ(s1, s2, mask) \
((((s1) ^ (s2)) & (mask)) == 0)
#define LACP_SYS_PRI(peer) (peer).lip_systemid.lsi_prio
#define LACP_PORT(_lp) ((struct lacp_port *)(_lp)->lp_psc)
#define LACP_SOFTC(_sc) ((struct lacp_softc *)(_sc)->sc_psc)
#define LACP_LOCK_INIT(_lsc) mtx_init(&(_lsc)->lsc_mtx, \
"lacp mtx", NULL, MTX_DEF)
#define LACP_LOCK_DESTROY(_lsc) mtx_destroy(&(_lsc)->lsc_mtx)
#define LACP_LOCK(_lsc) mtx_lock(&(_lsc)->lsc_mtx)
#define LACP_UNLOCK(_lsc) mtx_unlock(&(_lsc)->lsc_mtx)
#define LACP_LOCK_ASSERT(_lsc) mtx_assert(&(_lsc)->lsc_mtx, MA_OWNED)
struct mbuf *lacp_input(struct lagg_port *, struct mbuf *);
struct lagg_port *lacp_select_tx_port(struct lagg_softc *, struct mbuf *);
Add kernel-side support for in-kernel TLS. KTLS adds support for in-kernel framing and encryption of Transport Layer Security (1.0-1.2) data on TCP sockets. KTLS only supports offload of TLS for transmitted data. Key negotation must still be performed in userland. Once completed, transmit session keys for a connection are provided to the kernel via a new TCP_TXTLS_ENABLE socket option. All subsequent data transmitted on the socket is placed into TLS frames and encrypted using the supplied keys. Any data written to a KTLS-enabled socket via write(2), aio_write(2), or sendfile(2) is assumed to be application data and is encoded in TLS frames with an application data type. Individual records can be sent with a custom type (e.g. handshake messages) via sendmsg(2) with a new control message (TLS_SET_RECORD_TYPE) specifying the record type. At present, rekeying is not supported though the in-kernel framework should support rekeying. KTLS makes use of the recently added unmapped mbufs to store TLS frames in the socket buffer. Each TLS frame is described by a single ext_pgs mbuf. The ext_pgs structure contains the header of the TLS record (and trailer for encrypted records) as well as references to the associated TLS session. KTLS supports two primary methods of encrypting TLS frames: software TLS and ifnet TLS. Software TLS marks mbufs holding socket data as not ready via M_NOTREADY similar to sendfile(2) when TLS framing information is added to an unmapped mbuf in ktls_frame(). ktls_enqueue() is then called to schedule TLS frames for encryption. In the case of sendfile_iodone() calls ktls_enqueue() instead of pru_ready() leaving the mbufs marked M_NOTREADY until encryption is completed. For other writes (vn_sendfile when pages are available, write(2), etc.), the PRUS_NOTREADY is set when invoking pru_send() along with invoking ktls_enqueue(). A pool of worker threads (the "KTLS" kernel process) encrypts TLS frames queued via ktls_enqueue(). Each TLS frame is temporarily mapped using the direct map and passed to a software encryption backend to perform the actual encryption. (Note: The use of PHYS_TO_DMAP could be replaced with sf_bufs if someone wished to make this work on architectures without a direct map.) KTLS supports pluggable software encryption backends. Internally, Netflix uses proprietary pure-software backends. This commit includes a simple backend in a new ktls_ocf.ko module that uses the kernel's OpenCrypto framework to provide AES-GCM encryption of TLS frames. As a result, software TLS is now a bit of a misnomer as it can make use of hardware crypto accelerators. Once software encryption has finished, the TLS frame mbufs are marked ready via pru_ready(). At this point, the encrypted data appears as regular payload to the TCP stack stored in unmapped mbufs. ifnet TLS permits a NIC to offload the TLS encryption and TCP segmentation. In this mode, a new send tag type (IF_SND_TAG_TYPE_TLS) is allocated on the interface a socket is routed over and associated with a TLS session. TLS records for a TLS session using ifnet TLS are not marked M_NOTREADY but are passed down the stack unencrypted. The ip_output_send() and ip6_output_send() helper functions that apply send tags to outbound IP packets verify that the send tag of the TLS record matches the outbound interface. If so, the packet is tagged with the TLS send tag and sent to the interface. The NIC device driver must recognize packets with the TLS send tag and schedule them for TLS encryption and TCP segmentation. If the the outbound interface does not match the interface in the TLS send tag, the packet is dropped. In addition, a task is scheduled to refresh the TLS send tag for the TLS session. If a new TLS send tag cannot be allocated, the connection is dropped. If a new TLS send tag is allocated, however, subsequent packets will be tagged with the correct TLS send tag. (This latter case has been tested by configuring both ports of a Chelsio T6 in a lagg and failing over from one port to another. As the connections migrated to the new port, new TLS send tags were allocated for the new port and connections resumed without being dropped.) ifnet TLS can be enabled and disabled on supported network interfaces via new '[-]txtls[46]' options to ifconfig(8). ifnet TLS is supported across both vlan devices and lagg interfaces using failover, lacp with flowid enabled, or lacp with flowid enabled. Applications may request the current KTLS mode of a connection via a new TCP_TXTLS_MODE socket option. They can also use this socket option to toggle between software and ifnet TLS modes. In addition, a testing tool is available in tools/tools/switch_tls. This is modeled on tcpdrop and uses similar syntax. However, instead of dropping connections, -s is used to force KTLS connections to switch to software TLS and -i is used to switch to ifnet TLS. Various sysctls and counters are available under the kern.ipc.tls sysctl node. The kern.ipc.tls.enable node must be set to true to enable KTLS (it is off by default). The use of unmapped mbufs must also be enabled via kern.ipc.mb_use_ext_pgs to enable KTLS. KTLS is enabled via the KERN_TLS kernel option. This patch is the culmination of years of work by several folks including Scott Long and Randall Stewart for the original design and implementation; Drew Gallatin for several optimizations including the use of ext_pgs mbufs, the M_NOTREADY mechanism for TLS records awaiting software encryption, and pluggable software crypto backends; and John Baldwin for modifications to support hardware TLS offload. Reviewed by: gallatin, hselasky, rrs Obtained from: Netflix Sponsored by: Netflix, Chelsio Communications Differential Revision: https://reviews.freebsd.org/D21277
2019-08-27 00:01:56 +00:00
#if defined(RATELIMIT) || defined(KERN_TLS)
Implement kernel support for hardware rate limited sockets. - Add RATELIMIT kernel configuration keyword which must be set to enable the new functionality. - Add support for hardware driven, Receive Side Scaling, RSS aware, rate limited sendqueues and expose the functionality through the already established SO_MAX_PACING_RATE setsockopt(). The API support rates in the range from 1 to 4Gbytes/s which are suitable for regular TCP and UDP streams. The setsockopt(2) manual page has been updated. - Add rate limit function callback API to "struct ifnet" which supports the following operations: if_snd_tag_alloc(), if_snd_tag_modify(), if_snd_tag_query() and if_snd_tag_free(). - Add support to ifconfig to view, set and clear the IFCAP_TXRTLMT flag, which tells if a network driver supports rate limiting or not. - This patch also adds support for rate limiting through VLAN and LAGG intermediate network devices. - How rate limiting works: 1) The userspace application calls setsockopt() after accepting or making a new connection to set the rate which is then stored in the socket structure in the kernel. Later on when packets are transmitted a check is made in the transmit path for rate changes. A rate change implies a non-blocking ifp->if_snd_tag_alloc() call will be made to the destination network interface, which then sets up a custom sendqueue with the given rate limitation parameter. A "struct m_snd_tag" pointer is returned which serves as a "snd_tag" hint in the m_pkthdr for the subsequently transmitted mbufs. 2) When the network driver sees the "m->m_pkthdr.snd_tag" different from NULL, it will move the packets into a designated rate limited sendqueue given by the snd_tag pointer. It is up to the individual drivers how the rate limited traffic will be rate limited. 3) Route changes are detected by the NIC drivers in the ifp->if_transmit() routine when the ifnet pointer in the incoming snd_tag mismatches the one of the network interface. The network adapter frees the mbuf and returns EAGAIN which causes the ip_output() to release and clear the send tag. Upon next ip_output() a new "snd_tag" will be tried allocated. 4) When the PCB is detached the custom sendqueue will be released by a non-blocking ifp->if_snd_tag_free() call to the currently bound network interface. Reviewed by: wblock (manpages), adrian, gallatin, scottl (network) Differential Revision: https://reviews.freebsd.org/D3687 Sponsored by: Mellanox Technologies MFC after: 3 months
2017-01-18 13:31:17 +00:00
struct lagg_port *lacp_select_tx_port_by_hash(struct lagg_softc *, uint32_t);
#endif
void lacp_attach(struct lagg_softc *);
void lacp_detach(void *);
void lacp_init(struct lagg_softc *);
void lacp_stop(struct lagg_softc *);
int lacp_port_create(struct lagg_port *);
void lacp_port_destroy(struct lagg_port *);
void lacp_linkstate(struct lagg_port *);
2014-09-26 12:35:58 +00:00
void lacp_req(struct lagg_softc *, void *);
void lacp_portreq(struct lagg_port *, void *);
static __inline int
lacp_isactive(struct lagg_port *lgp)
{
struct lacp_port *lp = LACP_PORT(lgp);
struct lacp_softc *lsc = lp->lp_lsc;
struct lacp_aggregator *la = lp->lp_aggregator;
/* This port is joined to the active aggregator */
if (la != NULL && la == lsc->lsc_active_aggregator)
return (1);
return (0);
}
static __inline int
lacp_iscollecting(struct lagg_port *lgp)
{
struct lacp_port *lp = LACP_PORT(lgp);
return ((lp->lp_state & LACP_STATE_COLLECTING) != 0);
}
static __inline int
lacp_isdistributing(struct lagg_port *lgp)
{
struct lacp_port *lp = LACP_PORT(lgp);
return ((lp->lp_state & LACP_STATE_DISTRIBUTING) != 0);
}
/* following constants don't include terminating NUL */
#define LACP_MACSTR_MAX (2*6 + 5)
#define LACP_SYSTEMPRIOSTR_MAX (4)
#define LACP_SYSTEMIDSTR_MAX (LACP_SYSTEMPRIOSTR_MAX + 1 + LACP_MACSTR_MAX)
#define LACP_PORTPRIOSTR_MAX (4)
#define LACP_PORTNOSTR_MAX (4)
#define LACP_PORTIDSTR_MAX (LACP_PORTPRIOSTR_MAX + 1 + LACP_PORTNOSTR_MAX)
#define LACP_KEYSTR_MAX (4)
#define LACP_PARTNERSTR_MAX \
(1 + LACP_SYSTEMIDSTR_MAX + 1 + LACP_KEYSTR_MAX + 1 \
+ LACP_PORTIDSTR_MAX + 1)
#define LACP_LAGIDSTR_MAX \
(1 + LACP_PARTNERSTR_MAX + 1 + LACP_PARTNERSTR_MAX + 1)
#define LACP_STATESTR_MAX (255) /* XXX */
#endif /* _KERNEL */