diff --git a/sbin/geom/class/concat/gconcat.8 b/sbin/geom/class/concat/gconcat.8
index 181202271632..f4ee294f40df 100644
--- a/sbin/geom/class/concat/gconcat.8
+++ b/sbin/geom/class/concat/gconcat.8
@@ -83,7 +83,7 @@ method, no metadata are stored on the devices, so the concatenated
 device has to be configured by hand every time it is needed.
 The
 .Dq automatic
-method use on-disk metadata to detect devices.
+method uses on-disk metadata to detect devices.
 Once devices are labeled, they will be automatically detected and
 configured.
 .Pp
@@ -112,7 +112,7 @@ will be loaded if it is not loaded already.
 .It Cm stop
 Turn off existing concatenate device by its
 .Ar name .
-This command doesn't touch on-disk metadata!
+This command does not touch on-disk metadata!
 .It Cm destroy
 Same as
 .Cm stop .
diff --git a/sbin/geom/class/label/glabel.8 b/sbin/geom/class/label/glabel.8
index 46f20e91abb7..aeef74b9c5bf 100644
--- a/sbin/geom/class/label/glabel.8
+++ b/sbin/geom/class/label/glabel.8
@@ -24,7 +24,7 @@
 .\"
 .\" $FreeBSD$
 .\"
-.Dd Jul 2, 2004
+.Dd July 2, 2004
 .Dt GLABEL 8
 .Os
 .Sh NAME
@@ -69,7 +69,7 @@
 The
 .Nm
 utility is used for GEOM providers labelization.
-A label can be setup on a GEOM provider in two ways:
+A label can be set up on a GEOM provider in two ways:
 .Dq manual
 or
 .Dq automatic .
@@ -85,7 +85,7 @@ the future.
 This class also provides volume label detection for file systems.
 Those labels cannot be set with
 .Nm ,
-but must be set with the appropriate file system utility, e.g. for UFS
+but must be set with the appropriate file system utility, e.g.\& for UFS
 the file system label is set with
 .Xr tunefs 8 .
 Currently supported file systems are:
@@ -123,7 +123,7 @@ The kernel module
 .Pa geom_label.ko
 will be loaded if it is not loaded already.
 .It Cm label
-Setup a label
+Set up a label
 .Ar name
 for the given provider.
 This is the
@@ -135,7 +135,7 @@ will be loaded if it is not loaded already.
 .It Cm stop
 Turn off the given label by its
 .Ar name .
-This command doesn't touch on-disk metadata!
+This command does not touch on-disk metadata!
 .It Cm destroy
 Same as
 .Cm stop .
@@ -161,7 +161,8 @@ Force the removal of the specified labels.
 Be more verbose.
 .El
 .Sh EXAMPLES
-The following example shows how to setup a label for disk da2,
+The following example shows how to set up a label for disk
+.Dq Li da2 ,
 create a file system on it, and mount it:
 .Bd -literal -offset indent
 glabel label -v usr /dev/da2
@@ -173,7 +174,7 @@ glabel stop usr
 glabel unload
 .Ed
 .Pp
-The next example shows how to setup a label for a UFS file system:
+The next example shows how to set up a label for a UFS file system:
 .Bd -literal -offset indent
 tunefs -L data /dev/da4s1a
 mount /dev/ufs/data /mnt/data
diff --git a/sbin/geom/class/nop/gnop.8 b/sbin/geom/class/nop/gnop.8
index ee76038571e5..121f46bb1d2d 100644
--- a/sbin/geom/class/nop/gnop.8
+++ b/sbin/geom/class/nop/gnop.8
@@ -70,14 +70,15 @@ The first argument to
 indicates an action to be performed:
 .Bl -tag -width ".Cm configure"
 .It Cm create
-Setup a transparent provider on the given devices.
+Set up a transparent provider on the given devices.
 If operation succeded, new provider should appear with name
-.Pa /dev/<dev>.nop .
+.Pa /dev/ Ns Ao Ar dev Ac Ns Pa .nop .
 The kernel module
 .Pa geom_nop.ko
 will be loaded if it is not loaded already.
 .It Cm configure
-Configure existing transparent provider. At the moment it is only used
+Configure existing transparent provider.
+At the moment it is only used
 for changing failure probability.
 The kernel module
 .Pa geom_nop.ko
diff --git a/sbin/geom/class/stripe/gstripe.8 b/sbin/geom/class/stripe/gstripe.8
index 1f3e7e1224fa..ef81c14cc2ab 100644
--- a/sbin/geom/class/stripe/gstripe.8
+++ b/sbin/geom/class/stripe/gstripe.8
@@ -85,7 +85,7 @@ method, no metadata are stored on the devices, so the striped
 device has to be configured by hand every time it is needed.
 The
 .Dq automatic
-method use on-disk metadata to detect devices.
+method uses on-disk metadata to detect devices.
 Once devices are labeled, they will be automatically detected and
 configured.
 .Pp
@@ -94,7 +94,7 @@ The first argument to
 indicates an action to be performed:
 .Bl -tag -width ".Cm destroy"
 .It Cm create
-Setup a striped device from the given devices with specified
+Set up a striped device from the given devices with specified
 .Ar name .
 This is the
 .Dq manual
@@ -103,7 +103,7 @@ The kernel module
 .Pa geom_stripe.ko
 will be loaded if it is not loaded already.
 .It Cm label
-Setup a striped device from the given devices with the specified
+Set up a striped device from the given devices with the specified
 .Ar name .
 This is the
 .Dq automatic
@@ -114,7 +114,7 @@ will be loaded if it is not loaded already.
 .It Cm stop
 Turn off existing striped device by its
 .Ar name .
-This command doesn't touch on-disk metadata!
+This command does not touch on-disk metadata!
 .It Cm destroy
 Same as
 .Cm stop .
@@ -142,7 +142,7 @@ Specifies size of stripe block.
 Be more verbose.
 .El
 .Sh EXAMPLES
-The following example shows how to setup striped device from four disks
+The following example shows how to set up striped device from four disks
 for automatic configuration, create a file system on it, and mount it:
 .Bd -literal -offset indent
 gstripe label -v -s 65536 data /dev/da0 /dev/da1 /dev/da2 /dev/da3
diff --git a/sbin/geom/core/geom.8 b/sbin/geom/core/geom.8
index 4fc067a9e061..ea22a0b5e326 100644
--- a/sbin/geom/core/geom.8
+++ b/sbin/geom/core/geom.8
@@ -55,9 +55,9 @@ Print detailed information (within the given class) about all providers
 This command is only available if the given class exists in the kernel.
 .It Cm load
 Load the kernel module that implements the given class.
-This command is only available if the class doesn't yet exist in the kernel and
+This command is only available if the class does not yet exist in the kernel and
 the file
-.Pa geom_<class>.ko
+.Pa geom_ Ns Ao Ar class Ac Ns Pa .ko
 can be found in one of the directories specifed in
 .Va kern.module_path
 sysctl.
@@ -75,10 +75,11 @@ directory and are loaded via
 function when the class name is known.
 When a class-specific shared library exists, a direct utility should also be
 available under the name of
-.Nm g<class> .
+.Nm g Ns Ar class .
 .Pp
 Currently available classes which are aware of
 .Xr geom 8 :
+.Pp
 .Bl -bullet -offset indent -compact
 .It
 CONCAT