Add NXP/Freescale DIU driver for PowerPC SoCs
Summary: This enables some features of the DIU, using a static configuration, specified either via a 'edid' property on the 'display' FDT node, or a 'video-mode' environment variable (bootarg). 'video-mode' was chosen because it matches u-boot's naming, so it can be set with: setenv bootargs video-mode=${video-mode} at the u-boot CLI. Mouse cursor is not supported currently, as a hardware cursor is not supported by framebuffer VT yet. Currently it only supports a 32bpp ARGB (actually BGRA) format, and only a single composite plane, at up to 1280x1024. Differential Revision: https://reviews.freebsd.org/D8022
This commit is contained in:
parent
89d7100b1f
commit
1e6afa0eaf
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=306358
@ -135,6 +135,7 @@ powerpc/mikrotik/platform_rb.c optional mikrotik
|
||||
powerpc/mpc85xx/atpic.c optional mpc85xx isa
|
||||
powerpc/mpc85xx/ds1553_bus_fdt.c optional ds1553 fdt
|
||||
powerpc/mpc85xx/ds1553_core.c optional ds1553
|
||||
powerpc/mpc85xx/fsl_diu.c optional mpc85xx diu
|
||||
powerpc/mpc85xx/fsl_sdhc.c optional mpc85xx sdhc
|
||||
powerpc/mpc85xx/i2c.c optional iicbus fdt
|
||||
powerpc/mpc85xx/isa.c optional mpc85xx isa
|
||||
|
@ -93,3 +93,7 @@ device ehci
|
||||
device umass
|
||||
device usb
|
||||
device vlan
|
||||
|
||||
# P1022 DIU
|
||||
device diu
|
||||
device videomode
|
||||
|
479
sys/powerpc/mpc85xx/fsl_diu.c
Normal file
479
sys/powerpc/mpc85xx/fsl_diu.c
Normal file
@ -0,0 +1,479 @@
|
||||
/*-
|
||||
* Copyright (c) 2015 Justin Hibbits
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions
|
||||
* are met:
|
||||
* 1. Redistributions of source code must retain the above copyright
|
||||
* notice, this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright
|
||||
* notice, this list of conditions and the following disclaimer in the
|
||||
* documentation and/or other materials provided with the distribution.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
||||
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
||||
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
||||
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
||||
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
||||
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
||||
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
||||
* SUCH DAMAGE.
|
||||
*/
|
||||
|
||||
#include <sys/cdefs.h>
|
||||
__FBSDID("$FreeBSD$");
|
||||
|
||||
#include <sys/param.h>
|
||||
#include <sys/systm.h>
|
||||
#include <sys/bus.h>
|
||||
#include <sys/endian.h>
|
||||
#include <sys/kernel.h>
|
||||
#include <sys/module.h>
|
||||
#include <sys/malloc.h>
|
||||
#include <sys/rman.h>
|
||||
#include <sys/timeet.h>
|
||||
#include <sys/timetc.h>
|
||||
#include <sys/watchdog.h>
|
||||
#include <sys/fbio.h>
|
||||
#include <sys/consio.h>
|
||||
#include <sys/eventhandler.h>
|
||||
#include <sys/gpio.h>
|
||||
|
||||
#include <vm/vm.h>
|
||||
#include <vm/pmap.h>
|
||||
|
||||
#include <dev/fdt/fdt_common.h>
|
||||
#include <dev/ofw/openfirm.h>
|
||||
#include <dev/ofw/ofw_bus.h>
|
||||
#include <dev/ofw/ofw_bus_subr.h>
|
||||
|
||||
#include <dev/videomode/videomode.h>
|
||||
#include <dev/videomode/edidvar.h>
|
||||
|
||||
#include <dev/vt/vt.h>
|
||||
#include <dev/vt/colors/vt_termcolors.h>
|
||||
|
||||
#include <powerpc/mpc85xx/mpc85xx.h>
|
||||
|
||||
#include "gpio_if.h"
|
||||
|
||||
#include <machine/bus.h>
|
||||
#include <machine/cpu.h>
|
||||
|
||||
#include "fb_if.h"
|
||||
|
||||
#define DIU_DESC_1 0x000 /* Plane1 Area Descriptor Pointer Register */
|
||||
#define DIU_DESC_2 0x004 /* Plane2 Area Descriptor Pointer Register */
|
||||
#define DIU_DESC_3 0x008 /* Plane3 Area Descriptor Pointer Register */
|
||||
#define DIU_GAMMA 0x00C /* Gamma Register */
|
||||
#define DIU_PALETTE 0x010 /* Palette Register */
|
||||
#define DIU_CURSOR 0x014 /* Cursor Register */
|
||||
#define DIU_CURS_POS 0x018 /* Cursor Position Register */
|
||||
#define CURSOR_Y_SHIFT 16
|
||||
#define CURSOR_X_SHIFT 0
|
||||
#define DIU_DIU_MODE 0x01C /* DIU4 Mode */
|
||||
#define DIU_MODE_M 0x7
|
||||
#define DIU_MODE_S 0
|
||||
#define DIU_MODE_NORMAL 0x1
|
||||
#define DIU_MODE_2 0x2
|
||||
#define DIU_MODE_3 0x3
|
||||
#define DIU_MODE_COLBAR 0x4
|
||||
#define DIU_BGND 0x020 /* Background */
|
||||
#define DIU_BGND_WB 0x024 /* Background Color in write back Mode Register */
|
||||
#define DIU_DISP_SIZE 0x028 /* Display Size */
|
||||
#define DELTA_Y_S 16
|
||||
#define DELTA_X_S 0
|
||||
#define DIU_WB_SIZE 0x02C /* Write back Plane Size Register */
|
||||
#define DELTA_Y_WB_S 16
|
||||
#define DELTA_X_WB_S 0
|
||||
#define DIU_WB_MEM_ADDR 0x030 /* Address to Store the write back Plane Register */
|
||||
#define DIU_HSYN_PARA 0x034 /* Horizontal Sync Parameter */
|
||||
#define BP_H_SHIFT 22
|
||||
#define PW_H_SHIFT 11
|
||||
#define FP_H_SHIFT 0
|
||||
#define DIU_VSYN_PARA 0x038 /* Vertical Sync Parameter */
|
||||
#define BP_V_SHIFT 22
|
||||
#define PW_V_SHIFT 11
|
||||
#define FP_V_SHIFT 0
|
||||
#define DIU_SYNPOL 0x03C /* Synchronize Polarity */
|
||||
#define BP_VS (1 << 4)
|
||||
#define BP_HS (1 << 3)
|
||||
#define INV_CS (1 << 2)
|
||||
#define INV_VS (1 << 1)
|
||||
#define INV_HS (1 << 0)
|
||||
#define INV_PDI_VS (1 << 8) /* Polarity of PDI input VSYNC. */
|
||||
#define INV_PDI_HS (1 << 9) /* Polarity of PDI input HSYNC. */
|
||||
#define INV_PDI_DE (1 << 10) /* Polarity of PDI input DE. */
|
||||
#define DIU_THRESHOLD 0x040 /* Threshold */
|
||||
#define LS_BF_VS_SHIFT 16
|
||||
#define OUT_BUF_LOW_SHIFT 0
|
||||
#define DIU_INT_STATUS 0x044 /* Interrupt Status */
|
||||
#define DIU_INT_MASK 0x048 /* Interrupt Mask */
|
||||
#define DIU_COLBAR_1 0x04C /* COLBAR_1 */
|
||||
#define DIU_COLORBARn_R(x) ((x & 0xff) << 16)
|
||||
#define DIU_COLORBARn_G(x) ((x & 0xff) << 8)
|
||||
#define DIU_COLORBARn_B(x) ((x & 0xff) << 0)
|
||||
#define DIU_COLBAR_2 0x050 /* COLBAR_2 */
|
||||
#define DIU_COLBAR_3 0x054 /* COLBAR_3 */
|
||||
#define DIU_COLBAR_4 0x058 /* COLBAR_4 */
|
||||
#define DIU_COLBAR_5 0x05c /* COLBAR_5 */
|
||||
#define DIU_COLBAR_6 0x060 /* COLBAR_6 */
|
||||
#define DIU_COLBAR_7 0x064 /* COLBAR_7 */
|
||||
#define DIU_COLBAR_8 0x068 /* COLBAR_8 */
|
||||
#define DIU_FILLING 0x06C /* Filling Register */
|
||||
#define DIU_PLUT 0x070 /* Priority Look Up Table Register */
|
||||
|
||||
/* Control Descriptor */
|
||||
#define DIU_CTRLDESCL(n, m) 0x200 + (0x40 * n) + 0x4 * (m - 1)
|
||||
#define DIU_CTRLDESCLn_1(n) DIU_CTRLDESCL(n, 1)
|
||||
#define DIU_CTRLDESCLn_2(n) DIU_CTRLDESCL(n, 2)
|
||||
#define DIU_CTRLDESCLn_3(n) DIU_CTRLDESCL(n, 3)
|
||||
#define TRANS_SHIFT 20
|
||||
#define DIU_CTRLDESCLn_4(n) DIU_CTRLDESCL(n, 4)
|
||||
#define BPP_MASK 0xf /* Bit per pixel Mask */
|
||||
#define BPP_SHIFT 16 /* Bit per pixel Shift */
|
||||
#define BPP24 0x5
|
||||
#define EN_LAYER (1 << 31) /* Enable the layer */
|
||||
#define DIU_CTRLDESCLn_5(n) DIU_CTRLDESCL(n, 5)
|
||||
#define DIU_CTRLDESCLn_6(n) DIU_CTRLDESCL(n, 6)
|
||||
#define DIU_CTRLDESCLn_7(n) DIU_CTRLDESCL(n, 7)
|
||||
#define DIU_CTRLDESCLn_8(n) DIU_CTRLDESCL(n, 8)
|
||||
#define DIU_CTRLDESCLn_9(n) DIU_CTRLDESCL(n, 9)
|
||||
|
||||
#define NUM_LAYERS 1
|
||||
|
||||
struct panel_info {
|
||||
uint32_t panel_width;
|
||||
uint32_t panel_height;
|
||||
uint32_t panel_hbp;
|
||||
uint32_t panel_hpw;
|
||||
uint32_t panel_hfp;
|
||||
uint32_t panel_vbp;
|
||||
uint32_t panel_vpw;
|
||||
uint32_t panel_vfp;
|
||||
uint32_t panel_freq;
|
||||
uint32_t clk_div;
|
||||
};
|
||||
|
||||
struct diu_area_descriptor {
|
||||
uint32_t pixel_format;
|
||||
uint32_t bitmap_address;
|
||||
uint32_t source_size;
|
||||
uint32_t aoi_size;
|
||||
uint32_t aoi_offset;
|
||||
uint32_t display_offset;
|
||||
uint32_t chroma_key_max;
|
||||
uint32_t chroma_key_min;
|
||||
uint32_t next_ad_addr;
|
||||
} __aligned(32);
|
||||
|
||||
struct diu_softc {
|
||||
struct resource *res[2];
|
||||
void *ih;
|
||||
device_t sc_dev;
|
||||
device_t sc_fbd; /* fbd child */
|
||||
struct fb_info sc_info;
|
||||
struct panel_info sc_panel;
|
||||
struct diu_area_descriptor *sc_planes[3];
|
||||
uint8_t *sc_gamma;
|
||||
uint8_t *sc_cursor;
|
||||
};
|
||||
|
||||
static struct resource_spec diu_spec[] = {
|
||||
{ SYS_RES_MEMORY, 0, RF_ACTIVE },
|
||||
{ SYS_RES_IRQ, 0, RF_ACTIVE },
|
||||
{ -1, 0 }
|
||||
};
|
||||
|
||||
static int
|
||||
diu_probe(device_t dev)
|
||||
{
|
||||
|
||||
if (!ofw_bus_status_okay(dev))
|
||||
return (ENXIO);
|
||||
|
||||
if (!ofw_bus_is_compatible(dev, "fsl,diu"))
|
||||
return (ENXIO);
|
||||
|
||||
device_set_desc(dev, "Freescale Display Interface Unit");
|
||||
return (BUS_PROBE_DEFAULT);
|
||||
}
|
||||
|
||||
static void
|
||||
diu_intr(void *arg)
|
||||
{
|
||||
struct diu_softc *sc;
|
||||
int reg;
|
||||
|
||||
sc = arg;
|
||||
|
||||
/* Ack interrupts */
|
||||
reg = bus_read_4(sc->res[0], DIU_INT_STATUS);
|
||||
bus_write_4(sc->res[0], DIU_INT_STATUS, reg);
|
||||
|
||||
/* TODO interrupt handler */
|
||||
}
|
||||
|
||||
static int
|
||||
diu_set_pxclk(device_t dev, unsigned int freq)
|
||||
{
|
||||
phandle_t node;
|
||||
unsigned long bus_freq;
|
||||
uint32_t pxclk_set;
|
||||
uint32_t clkdvd;
|
||||
int res;
|
||||
|
||||
node = ofw_bus_get_node(device_get_parent(dev));
|
||||
if ((res = OF_getencprop(node, "bus-frequency",
|
||||
(pcell_t *)&bus_freq, sizeof(bus_freq)) <= 0)) {
|
||||
device_printf(dev, "Unable to get bus frequency\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
/* freq is in kHz */
|
||||
freq *= 1000;
|
||||
/* adding freq/2 to round-to-closest */
|
||||
pxclk_set = min(max((bus_freq + freq/2) / freq, 2), 255) << 16;
|
||||
pxclk_set |= OCP85XX_CLKDVDR_PXCKEN;
|
||||
clkdvd = ccsr_read4(OCP85XX_CLKDVDR);
|
||||
clkdvd &= ~(OCP85XX_CLKDVDR_PXCKEN | OCP85XX_CLKDVDR_PXCKINV |
|
||||
OCP85XX_CLKDVDR_PXCLK_MASK);
|
||||
ccsr_write4(OCP85XX_CLKDVDR, clkdvd);
|
||||
ccsr_write4(OCP85XX_CLKDVDR, clkdvd | pxclk_set);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
diu_init(struct diu_softc *sc)
|
||||
{
|
||||
struct panel_info *panel;
|
||||
int reg;
|
||||
|
||||
panel = &sc->sc_panel;
|
||||
|
||||
/* Temporarily disable the DIU while configuring */
|
||||
reg = bus_read_4(sc->res[0], DIU_DIU_MODE);
|
||||
reg &= ~(DIU_MODE_M << DIU_MODE_S);
|
||||
bus_write_4(sc->res[0], DIU_DIU_MODE, reg);
|
||||
|
||||
if (diu_set_pxclk(sc->sc_dev, panel->panel_freq) < 0) {
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
/* Configure DIU */
|
||||
/* Need to set these somehow later... */
|
||||
bus_write_4(sc->res[0], DIU_GAMMA, vtophys(sc->sc_gamma));
|
||||
bus_write_4(sc->res[0], DIU_CURSOR, vtophys(sc->sc_cursor));
|
||||
bus_write_4(sc->res[0], DIU_CURS_POS, 0);
|
||||
|
||||
reg = ((sc->sc_info.fb_height) << DELTA_Y_S);
|
||||
reg |= sc->sc_info.fb_width;
|
||||
bus_write_4(sc->res[0], DIU_DISP_SIZE, reg);
|
||||
|
||||
reg = (panel->panel_hbp << BP_H_SHIFT);
|
||||
reg |= (panel->panel_hpw << PW_H_SHIFT);
|
||||
reg |= (panel->panel_hfp << FP_H_SHIFT);
|
||||
bus_write_4(sc->res[0], DIU_HSYN_PARA, reg);
|
||||
|
||||
reg = (panel->panel_vbp << BP_V_SHIFT);
|
||||
reg |= (panel->panel_vpw << PW_V_SHIFT);
|
||||
reg |= (panel->panel_vfp << FP_V_SHIFT);
|
||||
bus_write_4(sc->res[0], DIU_VSYN_PARA, reg);
|
||||
|
||||
bus_write_4(sc->res[0], DIU_BGND, 0);
|
||||
|
||||
/* Mask all the interrupts */
|
||||
bus_write_4(sc->res[0], DIU_INT_MASK, 0x3f);
|
||||
|
||||
/* Reset all layers */
|
||||
sc->sc_planes[0] = contigmalloc(sizeof(struct diu_area_descriptor),
|
||||
M_DEVBUF, M_ZERO, 0, BUS_SPACE_MAXADDR_32BIT, 32, 0);
|
||||
bus_write_4(sc->res[0], DIU_DESC_1, vtophys(sc->sc_planes[0]));
|
||||
bus_write_4(sc->res[0], DIU_DESC_2, 0);
|
||||
bus_write_4(sc->res[0], DIU_DESC_3, 0);
|
||||
|
||||
/* Setup first plane */
|
||||
/* Area descriptor fields are little endian, so byte swap. */
|
||||
/* Word 0: Pixel format */
|
||||
/* Set to 8:8:8:8 ARGB, 4 bytes per pixel, no flip. */
|
||||
#define MAKE_PXLFMT(as,rs,gs,bs,a,r,g,b,f,s) \
|
||||
htole32((as << (4 * a)) | (rs << 4 * r) | \
|
||||
(gs << 4 * g) | (bs << 4 * b) | \
|
||||
(f << 28) | (s << 16) | \
|
||||
(a << 25) | (r << 19) | \
|
||||
(g << 21) | (b << 24))
|
||||
reg = MAKE_PXLFMT(8, 8, 8, 8, 3, 2, 1, 0, 1, 3);
|
||||
sc->sc_planes[0]->pixel_format = reg;
|
||||
/* Word 1: Bitmap address */
|
||||
sc->sc_planes[0]->bitmap_address = htole32(sc->sc_info.fb_pbase);
|
||||
/* Word 2: Source size/global alpha */
|
||||
reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 12));
|
||||
sc->sc_planes[0]->source_size = htole32(reg);
|
||||
/* Word 3: AOI Size */
|
||||
reg = (sc->sc_info.fb_width | (sc->sc_info.fb_height << 16));
|
||||
sc->sc_planes[0]->aoi_size = htole32(reg);
|
||||
/* Word 4: AOI Offset */
|
||||
sc->sc_planes[0]->aoi_offset = 0;
|
||||
/* Word 5: Display offset */
|
||||
sc->sc_planes[0]->display_offset = 0;
|
||||
/* Word 6: Chroma key max */
|
||||
sc->sc_planes[0]->chroma_key_max = 0;
|
||||
/* Word 7: Chroma key min */
|
||||
reg = 255 << 16 | 255 << 8 | 255;
|
||||
sc->sc_planes[0]->chroma_key_min = htole32(reg);
|
||||
/* Word 8: Next AD */
|
||||
sc->sc_planes[0]->next_ad_addr = 0;
|
||||
|
||||
/* TODO: derive this from the panel size */
|
||||
bus_write_4(sc->res[0], DIU_PLUT, 0x1f5f666);
|
||||
|
||||
/* Enable DIU in normal mode */
|
||||
reg = bus_read_4(sc->res[0], DIU_DIU_MODE);
|
||||
reg &= ~(DIU_MODE_M << DIU_MODE_S);
|
||||
reg |= (DIU_MODE_NORMAL << DIU_MODE_S);
|
||||
bus_write_4(sc->res[0], DIU_DIU_MODE, reg);
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static int
|
||||
diu_attach(device_t dev)
|
||||
{
|
||||
struct edid_info *edid;
|
||||
struct diu_softc *sc;
|
||||
const struct videomode *videomode;
|
||||
void *edid_cells;
|
||||
const char *vm_name;
|
||||
phandle_t node;
|
||||
int h, r, w;
|
||||
int err, i;
|
||||
|
||||
sc = device_get_softc(dev);
|
||||
sc->sc_dev = dev;
|
||||
|
||||
if (bus_alloc_resources(dev, diu_spec, sc->res)) {
|
||||
device_printf(dev, "could not allocate resources\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
node = ofw_bus_get_node(dev);
|
||||
/* Setup interrupt handler */
|
||||
err = bus_setup_intr(dev, sc->res[1], INTR_TYPE_BIO | INTR_MPSAFE,
|
||||
NULL, diu_intr, sc, &sc->ih);
|
||||
if (err) {
|
||||
device_printf(dev, "Unable to alloc interrupt resource.\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
|
||||
/* TODO: Eventually, allow EDID to be dynamically provided. */
|
||||
if (OF_getprop_alloc(node, "edid", 1, &edid_cells) <= 0) {
|
||||
/*
|
||||
* u-boot uses the environment variable name 'video-mode', so
|
||||
* just use the same name here. Should allow another variable
|
||||
* that better fits our design model, but this is fine.
|
||||
*/
|
||||
if ((vm_name = kern_getenv("video-mode")) == NULL) {
|
||||
device_printf(dev,
|
||||
"No EDID data and no video-mode env set\n");
|
||||
return (ENXIO);
|
||||
}
|
||||
}
|
||||
if (edid_cells != NULL) {
|
||||
if (edid_parse(edid_cells, edid) != 0) {
|
||||
device_printf(dev, "Error parsing EDID\n");
|
||||
OF_prop_free(edid_cells);
|
||||
return (ENXIO);
|
||||
}
|
||||
videomode = edid->edid_preferred_mode;
|
||||
} else {
|
||||
/* Parse video-mode kenv variable. */
|
||||
if ((err = sscanf(vm_name, "fslfb:%dx%d@%d", &w, &h, &r)) != 3) {
|
||||
device_printf(dev,
|
||||
"Cannot parse video mode: %s\n", vm_name);
|
||||
return (ENXIO);
|
||||
}
|
||||
videomode = pick_mode_by_ref(w, h, r);
|
||||
if (videomode == NULL) {
|
||||
device_printf(dev,
|
||||
"Cannot find mode for %dx%d@%d", w, h, r);
|
||||
return (ENXIO);
|
||||
}
|
||||
}
|
||||
|
||||
sc->sc_panel.panel_width = videomode->hdisplay;
|
||||
sc->sc_panel.panel_height = videomode->vdisplay;
|
||||
sc->sc_panel.panel_hbp = videomode->hsync_start - videomode->hdisplay;
|
||||
sc->sc_panel.panel_hfp = videomode->htotal - videomode->hsync_end;
|
||||
sc->sc_panel.panel_hpw = videomode->hsync_end - videomode->hsync_start;
|
||||
sc->sc_panel.panel_vbp = videomode->vsync_start - videomode->vdisplay;
|
||||
sc->sc_panel.panel_vfp = videomode->vtotal - videomode->vsync_end;
|
||||
sc->sc_panel.panel_vpw = videomode->vsync_end - videomode->vsync_start;
|
||||
sc->sc_panel.panel_freq = videomode->dot_clock;
|
||||
|
||||
sc->sc_info.fb_width = sc->sc_panel.panel_width;
|
||||
sc->sc_info.fb_height = sc->sc_panel.panel_height;
|
||||
sc->sc_info.fb_stride = sc->sc_info.fb_width * 4;
|
||||
sc->sc_info.fb_bpp = sc->sc_info.fb_depth = 32;
|
||||
sc->sc_info.fb_size = sc->sc_info.fb_height * sc->sc_info.fb_stride;
|
||||
sc->sc_info.fb_vbase = (intptr_t)contigmalloc(sc->sc_info.fb_size,
|
||||
M_DEVBUF, M_ZERO, 0, BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0);
|
||||
sc->sc_info.fb_pbase = (intptr_t)vtophys(sc->sc_info.fb_vbase);
|
||||
|
||||
/* Gamma table is 3 consecutive segments of 256 bytes. */
|
||||
sc->sc_gamma = contigmalloc(3 * 256, M_DEVBUF, 0, 0,
|
||||
BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0);
|
||||
/* Initialize gamma to default */
|
||||
for (i = 0; i < 3 * 256; i++)
|
||||
sc->sc_gamma[i] = (i % 256);
|
||||
|
||||
/* Cursor format is 32x32x16bpp */
|
||||
sc->sc_cursor = contigmalloc(32 * 32 * 2, M_DEVBUF, M_ZERO, 0,
|
||||
BUS_SPACE_MAXADDR_32BIT, PAGE_SIZE, 0);
|
||||
|
||||
diu_init(sc);
|
||||
|
||||
sc->sc_info.fb_name = device_get_nameunit(dev);
|
||||
|
||||
/* Ask newbus to attach framebuffer device to me. */
|
||||
sc->sc_fbd = device_add_child(dev, "fbd", device_get_unit(dev));
|
||||
if (sc->sc_fbd == NULL)
|
||||
device_printf(dev, "Can't attach fbd device\n");
|
||||
|
||||
if ((err = device_probe_and_attach(sc->sc_fbd)) != 0) {
|
||||
device_printf(dev, "Failed to attach fbd device: %d\n", err);
|
||||
}
|
||||
|
||||
return (0);
|
||||
}
|
||||
|
||||
static struct fb_info *
|
||||
diu_fb_getinfo(device_t dev)
|
||||
{
|
||||
struct diu_softc *sc = device_get_softc(dev);
|
||||
|
||||
return (&sc->sc_info);
|
||||
}
|
||||
|
||||
static device_method_t diu_methods[] = {
|
||||
DEVMETHOD(device_probe, diu_probe),
|
||||
DEVMETHOD(device_attach, diu_attach),
|
||||
|
||||
/* Framebuffer service methods */
|
||||
DEVMETHOD(fb_getinfo, diu_fb_getinfo),
|
||||
{ 0, 0 }
|
||||
};
|
||||
|
||||
static driver_t diu_driver = {
|
||||
"fb",
|
||||
diu_methods,
|
||||
sizeof(struct diu_softc),
|
||||
};
|
||||
|
||||
static devclass_t diu_devclass;
|
||||
|
||||
DRIVER_MODULE(fb, simplebus, diu_driver, diu_devclass, 0, 0);
|
@ -139,6 +139,13 @@ extern vm_offset_t ccsrbar_va;
|
||||
*/
|
||||
#define OCP85XX_RSTCR (CCSRBAR_VA + 0xe00b0)
|
||||
|
||||
#define OCP85XX_CLKDVDR (CCSRBAR_VA + 0xe0800)
|
||||
#define OCP85XX_CLKDVDR_PXCKEN 0x80000000
|
||||
#define OCP85XX_CLKDVDR_SSICKEN 0x20000000
|
||||
#define OCP85XX_CLKDVDR_PXCKINV 0x10000000
|
||||
#define OCP85XX_CLKDVDR_PXCLK_MASK 0x00FF0000
|
||||
#define OCP85XX_CLKDVDR_SSICLK_MASK 0x000000FF
|
||||
|
||||
/*
|
||||
* Run Control/Power Management Registers.
|
||||
*/
|
||||
|
Loading…
Reference in New Issue
Block a user