Import DTS files from Linux 4.18
This commit is contained in:
Emmanuel Vadot
commit
2421576ca3
Notes:
svn2git
2020-12-20 02:59:44 +00:00
svn path=/head/; revision=337703
@ -85,7 +85,7 @@
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <20 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tca6416_pins>;
|
||||
};
|
||||
|
||||
@ -94,7 +94,7 @@
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <20 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <20 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tca6416_pins>;
|
||||
};
|
||||
|
||||
@ -249,7 +249,7 @@
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <28 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <28 IRQ_TYPE_EDGE_RISING>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tps65910_pins>;
|
||||
};
|
||||
|
||||
@ -161,7 +161,13 @@
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* GPIO0_6 */
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spio0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
@ -364,7 +364,7 @@
|
||||
compatible = "invensense,mpu9250";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <21 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
||||
i2c-gate {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
@ -303,7 +303,14 @@
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
@ -137,7 +137,7 @@
|
||||
};
|
||||
};
|
||||
|
||||
backlight {
|
||||
lcd_bl: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&ecap2 0 50000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = <0 58 61 66 75 90 125 170 255>;
|
||||
@ -172,6 +172,7 @@
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&lcd_pins_default>;
|
||||
pinctrl-1 = <&lcd_pins_sleep>;
|
||||
backlight = <&lcd_bl>;
|
||||
status = "okay";
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
@ -399,7 +400,14 @@
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* spi0_cs1.gpio0_6 */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk.mmc0_clk */
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* mcasp0_aclkr.mmc0_sdwp */
|
||||
>;
|
||||
};
|
||||
|
||||
|
||||
124
sys/gnu/dts/arm/am335x-osd335x-common.dtsi
Normal file
124
sys/gnu/dts/arm/am335x-osd335x-common.dtsi
Normal file
@ -0,0 +1,124 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&dcdc2_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x20000000>; /* 512 MB */
|
||||
};
|
||||
};
|
||||
|
||||
&cpu0_opp_table {
|
||||
/*
|
||||
* Octavo Systems:
|
||||
* The EFUSE_SMA register is not programmed for any of the AM335x wafers
|
||||
* we get and we are not programming them during our production test.
|
||||
* Therefore, from a DEVICE_ID revision point of view, the silicon looks
|
||||
* like it is Revision 2.1. However, from an EFUSE_SMA point of view for
|
||||
* the HW OPP table, the silicon looks like it is Revision 1.0 (ie the
|
||||
* EFUSE_SMA register reads as all zeros).
|
||||
*/
|
||||
oppnitro-1000000000 {
|
||||
opp-supported-hw = <0x06 0x0100>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
i2c0_pins: pinmux-i2c0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x988, PIN_INPUT_PULLUP | MUX_MODE0) /* (C17) I2C0_SDA.I2C0_SDA */
|
||||
AM33XX_IOPAD(0x98c, PIN_INPUT_PULLUP | MUX_MODE0) /* (C16) I2C0_SCL.I2C0_SCL */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
tps: tps@24 {
|
||||
reg = <0x24>;
|
||||
};
|
||||
};
|
||||
|
||||
/include/ "tps65217.dtsi"
|
||||
|
||||
&tps {
|
||||
interrupts = <7>; /* NMI */
|
||||
interrupt-parent = <&intc>;
|
||||
|
||||
ti,pmic-shutdown-controller;
|
||||
|
||||
pwrbutton {
|
||||
interrupts = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
regulators {
|
||||
dcdc1_reg: regulator@0 {
|
||||
regulator-name = "vdds_dpr";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc2_reg: regulator@1 {
|
||||
/* VDD_MPU voltage limits 0.95V - 1.26V with +/-4% tolerance */
|
||||
regulator-name = "vdd_mpu";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1351500>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
dcdc3_reg: regulator@2 {
|
||||
/* VDD_CORE voltage limits 0.95V - 1.1V with +/-4% tolerance */
|
||||
regulator-name = "vdd_core";
|
||||
regulator-min-microvolt = <925000>;
|
||||
regulator-max-microvolt = <1150000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo1_reg: regulator@3 {
|
||||
regulator-name = "vio,vrtc,vdds";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo2_reg: regulator@4 {
|
||||
regulator-name = "vdd_3v3aux";
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo3_reg: regulator@5 {
|
||||
regulator-name = "vdd_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
ldo4_reg: regulator@6 {
|
||||
regulator-name = "vdd_3v3a";
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&aes {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sham {
|
||||
status = "okay";
|
||||
};
|
||||
237
sys/gnu/dts/arm/am335x-pocketbeagle.dts
Normal file
237
sys/gnu/dts/arm/am335x-pocketbeagle.dts
Normal file
@ -0,0 +1,237 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* Author: Robert Nelson <robertcnelson@gmail.com>
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-osd335x-common.dtsi"
|
||||
|
||||
/ {
|
||||
model = "TI AM335x PocketBeagle";
|
||||
compatible = "ti,am335x-pocketbeagle", "ti,am335x-bone", "ti,am33xx";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&usr_leds_pins>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
usr0 {
|
||||
label = "beaglebone:green:usr0";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr1 {
|
||||
label = "beaglebone:green:usr1";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr2 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
usr3 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
i2c2_pins: pinmux-i2c2-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* (D17) uart1_rtsn.I2C2_SCL */
|
||||
AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* (D18) uart1_ctsn.I2C2_SDA */
|
||||
>;
|
||||
};
|
||||
|
||||
ehrpwm0_pins: pinmux-ehrpwm0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* (A13) mcasp0_aclkx.ehrpwm0A */
|
||||
>;
|
||||
};
|
||||
|
||||
ehrpwm1_pins: pinmux-ehrpwm1-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x848, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U14) gpmc_a2.ehrpwm1A */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc0_pins: pinmux-mmc0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT | MUX_MODE4) /* (B12) mcasp0_aclkr.mmc0_sdwp */
|
||||
>;
|
||||
};
|
||||
|
||||
spi0_pins: pinmux-spi0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x950, PIN_INPUT_PULLUP | MUX_MODE0) /* (A17) spi0_sclk.spi0_sclk */
|
||||
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* (B17) spi0_d0.spi0_d0 */
|
||||
AM33XX_IOPAD(0x958, PIN_INPUT_PULLUP | MUX_MODE0) /* (B16) spi0_d1.spi0_d1 */
|
||||
AM33XX_IOPAD(0x95c, PIN_INPUT_PULLUP | MUX_MODE0) /* (A16) spi0_cs0.spi0_cs0 */
|
||||
>;
|
||||
};
|
||||
|
||||
spi1_pins: pinmux-spi1-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x964, PIN_INPUT_PULLUP | MUX_MODE4) /* (C18) eCAP0_in_PWM0_out.spi1_sclk */
|
||||
AM33XX_IOPAD(0x968, PIN_INPUT_PULLUP | MUX_MODE4) /* (E18) uart0_ctsn.spi1_d0 */
|
||||
AM33XX_IOPAD(0x96c, PIN_INPUT_PULLUP | MUX_MODE4) /* (E17) uart0_rtsn.spi1_d1 */
|
||||
AM33XX_IOPAD(0x9b0, PIN_INPUT_PULLUP | MUX_MODE4) /* (A15) xdma_event_intr0.spi1_cs1 */
|
||||
>;
|
||||
};
|
||||
|
||||
usr_leds_pins: pinmux-usr-leds-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* (V15) gpmc_a5.gpio1[21] - USR_LED_0 */
|
||||
AM33XX_IOPAD(0x858, PIN_OUTPUT | MUX_MODE7) /* (U15) gpmc_a6.gpio1[22] - USR_LED_1 */
|
||||
AM33XX_IOPAD(0x85c, PIN_OUTPUT | MUX_MODE7) /* (T15) gpmc_a7.gpio1[23] - USR_LED_2 */
|
||||
AM33XX_IOPAD(0x860, PIN_OUTPUT | MUX_MODE7) /* (V16) gpmc_a8.gpio1[24] - USR_LED_3 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux-uart0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* (E15) uart0_rxd.uart0_rxd */
|
||||
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* (E16) uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
uart4_pins: pinmux-uart4-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x870, PIN_INPUT_PULLUP | MUX_MODE6) /* (T17) gpmc_wait0.uart4_rxd */
|
||||
AM33XX_IOPAD(0x874, PIN_OUTPUT_PULLDOWN | MUX_MODE6) /* (U17) gpmc_wpn.uart4_txd */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&epwmss0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehrpwm0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm0_pins>;
|
||||
};
|
||||
|
||||
&epwmss1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ehrpwm1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm1_pins>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
eeprom: eeprom@50 {
|
||||
compatible = "atmel,24c256";
|
||||
reg = <0x50>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc0_pins>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
system-power-controller;
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
ti,chan-step-avg = <16 16 16 16 16 16 16 16>;
|
||||
ti,chan-step-opendelay = <0x98 0x98 0x98 0x98 0x98 0x98 0x98 0x98>;
|
||||
ti,chan-step-sampledelay = <0x0 0x0 0x0 0x0 0x0 0x0 0x0 0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart4 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart4_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
@ -8,11 +8,17 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "am3517.dtsi"
|
||||
#include "am3517-som.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "TI AM3517 EVM (AM3517/05 TMDSEVM3517)";
|
||||
compatible = "ti,am3517-evm", "ti,am3517", "ti,omap3";
|
||||
|
||||
aliases {
|
||||
display0 = &lcd0;
|
||||
};
|
||||
|
||||
memory@80000000 {
|
||||
device_type = "memory";
|
||||
reg = <0x80000000 0x10000000>; /* 256 MB */
|
||||
@ -24,6 +30,144 @@
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys-polled";
|
||||
poll-interval = <100>;
|
||||
|
||||
user_pb {
|
||||
label = "User Push Button";
|
||||
linux,code = <BTN_0>;
|
||||
gpios = <&tca6416 5 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_1 {
|
||||
label = "User Switch 1";
|
||||
linux,code = <BTN_1>;
|
||||
gpios = <&tca6416 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_2 {
|
||||
label = "User Switch 2";
|
||||
linux,code = <BTN_2>;
|
||||
gpios = <&tca6416 9 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_3 {
|
||||
label = "User Switch 3";
|
||||
linux,code = <BTN_3>;
|
||||
gpios = <&tca6416 10 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_4 {
|
||||
label = "User Switch 4";
|
||||
linux,code = <BTN_4>;
|
||||
gpios = <&tca6416 11 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_5 {
|
||||
label = "User Switch 5";
|
||||
linux,code = <BTN_5>;
|
||||
gpios = <&tca6416 12 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_6 {
|
||||
label = "User Switch 6";
|
||||
linux,code = <BTN_6>;
|
||||
gpios = <&tca6416 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_7 {
|
||||
label = "User Switch 7";
|
||||
linux,code = <BTN_7>;
|
||||
gpios = <&tca6416 14 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
user_sw_8 {
|
||||
label = "User Switch 8";
|
||||
linux,code = <BTN_8>;
|
||||
gpios = <&tca6416 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&leds_pins>;
|
||||
|
||||
user_led_1 {
|
||||
label = "am3517evm:green:user_led_1";
|
||||
gpios = <&tca6416 7 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user_led_2 {
|
||||
label = "am3517evm:green:user_led_2";
|
||||
gpios = <&tca6416 6 GPIO_ACTIVE_LOW>;
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
user_led_3 {
|
||||
label = "am3517evm:green:user_led_3";
|
||||
gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0"; /* SD/MMC card activity */
|
||||
};
|
||||
|
||||
user_led_4 {
|
||||
label = "am3517evm:green:user_led_4";
|
||||
gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
};
|
||||
|
||||
lcd0: display@0 {
|
||||
compatible = "panel-dpi";
|
||||
label = "15";
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
|
||||
|
||||
port {
|
||||
lcd_in: endpoint {
|
||||
remote-endpoint = <&dpi_out>;
|
||||
};
|
||||
};
|
||||
|
||||
panel-timing {
|
||||
clock-frequency = <9000000>;
|
||||
hactive = <480>;
|
||||
vactive = <272>;
|
||||
hfront-porch = <3>;
|
||||
hback-porch = <2>;
|
||||
hsync-len = <42>;
|
||||
vback-porch = <3>;
|
||||
vfront-porch = <4>;
|
||||
vsync-len = <11>;
|
||||
hsync-active = <0>;
|
||||
vsync-active = <0>;
|
||||
de-active = <1>;
|
||||
pixelclk-active = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
bl: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&backlight_pins>;
|
||||
pwms = <&pwm11 0 5000000 0>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
|
||||
default-brightness-level = <7>;
|
||||
enable-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* gpio_182 */
|
||||
};
|
||||
|
||||
pwm11: dmtimer-pwm@11 {
|
||||
compatible = "ti,omap-dmtimer-pwm";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm_pins>;
|
||||
ti,timers = <&timer11>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
};
|
||||
|
||||
&davinci_emac {
|
||||
@ -34,12 +178,32 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
&dss {
|
||||
status = "ok";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&dss_dpi_pins>;
|
||||
|
||||
vdds_dsi-supply = <&vdd_io_reg>;
|
||||
vdda_video-supply = <&vdd_io_reg>;
|
||||
|
||||
port {
|
||||
dpi_out: endpoint {
|
||||
remote-endpoint = <&lcd_in>;
|
||||
data-lines = <16>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
clock-frequency = <400000>;
|
||||
/* User DIP swithes [1:8] / User LEDS [1:2] */
|
||||
tca6416: gpio@21 {
|
||||
compatible = "ti,tca6416";
|
||||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
@ -47,8 +211,13 @@
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
vmmc-supply = <&vmmc_fixed>;
|
||||
bus-width = <4>;
|
||||
wp-gpios = <&gpio4 30 GPIO_ACTIVE_HIGH>; /* gpio_126 */
|
||||
cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
@ -59,3 +228,63 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
||||
leds_pins: pinmux_leds_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a24, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu0.gpio_11 */
|
||||
OMAP3_WKUP_IOPAD(0x2a26, PIN_OUTPUT_PULLUP | MUX_MODE4) /* jtag_emu1.gpio_31 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux_mmc1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
|
||||
OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
|
||||
OMAP3_CORE1_IOPAD(0x2150, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat4.gpio_126 */
|
||||
OMAP3_CORE1_IOPAD(0x2152, PIN_INPUT_PULLUP | MUX_MODE4) /* sdmmc1_dat5.gpio_127 */
|
||||
>;
|
||||
};
|
||||
|
||||
pwm_pins: pinmux_pwm_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21dc, PIN_OUTPUT | MUX_MODE1) /* mcspi2_cs0.gpt11_pwm */
|
||||
>;
|
||||
};
|
||||
|
||||
backlight_pins: pinmux_backlight_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21de, PIN_OUTPUT | MUX_MODE4) /* mcspi2_cs1.gpio_182 */
|
||||
>;
|
||||
};
|
||||
|
||||
dss_dpi_pins: pinmux_dss_dpi_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x21d2, PIN_OUTPUT | MUX_MODE4) /* mcspi1_cs2.gpio_176 */
|
||||
OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
|
||||
OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
|
||||
OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
|
||||
OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
|
||||
OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
|
||||
OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
|
||||
OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
|
||||
OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
|
||||
OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
|
||||
OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
|
||||
OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
|
||||
OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
|
||||
OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
|
||||
OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
|
||||
OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
|
||||
OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
|
||||
OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
|
||||
OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
|
||||
OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
|
||||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
142
sys/gnu/dts/arm/am3517-som.dtsi
Normal file
142
sys/gnu/dts/arm/am3517-som.dtsi
Normal file
@ -0,0 +1,142 @@
|
||||
/*
|
||||
* Copyright (C) 2016 Derald D. Woods <woods.technical@gmail.com>
|
||||
*
|
||||
* Based on am3517-evm.dts
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/ {
|
||||
cpus {
|
||||
cpu@0 {
|
||||
cpu0-supply = <&vdd_core_reg>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
|
||||
|
||||
nand@0,0 {
|
||||
compatible = "ti,omap2-nand";
|
||||
linux,mtd-name = "micron,mt29f4g16abchch";
|
||||
reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
|
||||
nand-bus-width = <16>;
|
||||
ti,nand-ecc-opt = "bch8";
|
||||
gpmc,sync-clk-ps = <0>;
|
||||
gpmc,cs-on-ns = <0>;
|
||||
gpmc,cs-rd-off-ns = <44>;
|
||||
gpmc,cs-wr-off-ns = <44>;
|
||||
gpmc,adv-on-ns = <6>;
|
||||
gpmc,adv-rd-off-ns = <34>;
|
||||
gpmc,adv-wr-off-ns = <44>;
|
||||
gpmc,we-off-ns = <40>;
|
||||
gpmc,oe-off-ns = <54>;
|
||||
gpmc,access-ns = <64>;
|
||||
gpmc,rd-cycle-ns = <82>;
|
||||
gpmc,wr-cycle-ns = <82>;
|
||||
gpmc,wr-access-ns = <40>;
|
||||
gpmc,wr-data-mux-bus-ns = <0>;
|
||||
gpmc,device-width = <2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
clock-frequency = <400000>;
|
||||
|
||||
s35390a: s35390a@30 {
|
||||
compatible = "sii,s35390a";
|
||||
reg = <0x30>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc_pins>;
|
||||
interrupts-extended = <&gpio2 23 IRQ_TYPE_EDGE_FALLING>; /* gpio_55 */
|
||||
};
|
||||
|
||||
tps: tps65023@48 {
|
||||
compatible = "ti,tps65023";
|
||||
reg = <0x48>;
|
||||
|
||||
regulators {
|
||||
vdd_core_reg: VDCDC1 {
|
||||
regulator-name = "vdd_core";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
};
|
||||
|
||||
vdd_io_reg: VDCDC2 {
|
||||
regulator-name = "vdd_io";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
|
||||
vdd_1v8_reg: VDCDC3 {
|
||||
regulator-name = "vdd_1v8";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vdd_usb18_reg: LDO1 {
|
||||
regulator-name = "vdd_usb18";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
};
|
||||
|
||||
vdd_usb33_reg: LDO2 {
|
||||
regulator-name = "vdd_usb33";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
touchscreen: tsc2004@4b {
|
||||
compatible = "ti,tsc2004";
|
||||
reg = <0x4b>;
|
||||
|
||||
vio-supply = <&vdd_io_reg>;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&tsc2004_pins>;
|
||||
interrupts-extended = <&gpio3 1 IRQ_TYPE_EDGE_RISING>; /* gpio_65 */
|
||||
|
||||
touchscreen-fuzz-x = <4>;
|
||||
touchscreen-fuzz-y = <7>;
|
||||
touchscreen-fuzz-pressure = <2>;
|
||||
touchscreen-size-x = <480>;
|
||||
touchscreen-size-y = <272>;
|
||||
touchscreen-max-pressure = <2048>;
|
||||
|
||||
ti,x-plate-ohms = <280>;
|
||||
ti,esd-recovery-timeout-ms = <8000>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
||||
rtc_pins: pinmux_rtc_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
|
||||
>;
|
||||
};
|
||||
|
||||
tsc2004_pins: pinmux_tsc2004_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
@ -39,6 +39,8 @@
|
||||
ti,davinci-ctrl-ram-size = <0x2000>;
|
||||
ti,davinci-rmii-en = /bits/ 8 <1>;
|
||||
local-mac-address = [ 00 00 00 00 00 00 ];
|
||||
clocks = <&emac_ick>;
|
||||
clock-names = "ick";
|
||||
};
|
||||
|
||||
davinci_mdio: ethernet@5c030000 {
|
||||
@ -49,6 +51,8 @@
|
||||
bus_freq = <1000000>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
clocks = <&emac_fck>;
|
||||
clock-names = "fck";
|
||||
};
|
||||
|
||||
uart4: serial@4809e000 {
|
||||
@ -87,6 +91,11 @@
|
||||
};
|
||||
};
|
||||
|
||||
/* Table Table 5-79 of the TRM shows 480ab000 is reserved */
|
||||
&usb_otg_hs {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&iva {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
@ -203,7 +203,7 @@
|
||||
tps65218: tps65218@24 {
|
||||
compatible = "ti,tps65218";
|
||||
reg = <0x24>;
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
|
||||
interrupt-parent = <&gic>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
@ -543,7 +543,7 @@
|
||||
tps65218: tps65218@24 {
|
||||
reg = <0x24>;
|
||||
compatible = "ti,tps65218";
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
|
||||
@ -15,6 +15,7 @@
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "TI AM437x SK EVM";
|
||||
@ -158,6 +159,22 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vmmcwl_fixed: fixedregulator-mmcwl {
|
||||
/*
|
||||
* WL_EN is not SDIO standard compliant. It is an out of band
|
||||
* signal and hard to be dealt with in a standard way by the
|
||||
* SDIO core driver.
|
||||
* So modelling the WL_EN line as a regulator was a natural
|
||||
* choice as the MMC core already deals with MMC supplies.
|
||||
*/
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcwl_fixed";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio4 8 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-high;
|
||||
};
|
||||
};
|
||||
|
||||
&am43xx_pinmux {
|
||||
@ -418,6 +435,62 @@
|
||||
AM4372_IOPAD(0xac4, PIN_OUTPUT | MUX_MODE0) /* usb0_drvvbus.usb0_drvvbus */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc3_pins_default: pinmux_mmc3_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD21) cam1_data2.mmc2_clk */
|
||||
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE22) cam1_data3.mmc2_cmd */
|
||||
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD22) cam1_data4.mmc2_dat0 */
|
||||
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE23) cam1_data5.mmc2_dat1 */
|
||||
AM4372_IOPAD(0xa00, PIN_INPUT_PULLUP | MUX_MODE3) /* (AD23) cam1_data6.mmc2_dat2 */
|
||||
AM4372_IOPAD(0xa04, PIN_INPUT_PULLUP | MUX_MODE3) /* (AE24) cam1_data7.mmc2_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc3_pins_sleep: pinmux_mmc3_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x9f0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD21) cam1_data2.mmc2_clk */
|
||||
AM4372_IOPAD(0x9f4, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE22) cam1_data3.mmc2_cmd */
|
||||
AM4372_IOPAD(0x9f8, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD22) cam1_data4.mmc2_dat0 */
|
||||
AM4372_IOPAD(0x9fc, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE23) cam1_data5.mmc2_dat1 */
|
||||
AM4372_IOPAD(0xa00, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AD23) cam1_data6.mmc2_dat2 */
|
||||
AM4372_IOPAD(0xa04, PIN_INPUT_PULLDOWN | MUX_MODE7) /* (AE24) cam1_data7.mmc2_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
wlan_pins_default: pinmux_wlan_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
|
||||
AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
|
||||
>;
|
||||
};
|
||||
|
||||
wlan_pins_sleep: pinmux_wlan_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x9d0, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data8.gpio4_8 WL_EN */
|
||||
AM4372_IOPAD(0x9e4, PIN_INPUT | WAKEUP_ENABLE | MUX_MODE7) /* cam1_wen.gpio4_13 WL_IRQ */
|
||||
>;
|
||||
};
|
||||
|
||||
uart1_bt_pins_default: pinmux_uart1_bt_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x980, PIN_INPUT | MUX_MODE0) /* uart1_rxd.uart1_rxd */
|
||||
AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_txd.uart1_txd */
|
||||
AM4372_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE0) /* uart1_ctsn.uart1_ctsn */
|
||||
AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart1_rtsn.uart1_rtsn */
|
||||
AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
|
||||
>;
|
||||
};
|
||||
|
||||
uart1_bt_pins_sleep: pinmux_uart1_bt_pins_sleep {
|
||||
pinctrl-single,pins = <
|
||||
AM4372_IOPAD(0x980, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rxd.uart1_rxd */
|
||||
AM4372_IOPAD(0x984, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_txd.uart1_txd */
|
||||
AM4372_IOPAD(0x978, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_ctsn.uart1_ctsn */
|
||||
AM4372_IOPAD(0x97c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* uart1_rtsn.uart1_rtsn */
|
||||
AM4372_IOPAD(0x9cc, PIN_OUTPUT_PULLUP | MUX_MODE7) /* cam1_data9.gpio4_7 BT_EN */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
@ -537,6 +610,8 @@
|
||||
|
||||
touchscreen-size-x = <480>;
|
||||
touchscreen-size-y = <272>;
|
||||
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
tlv320aic3106: tlv320aic3106@1b {
|
||||
@ -581,6 +656,10 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gpio5 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -595,6 +674,44 @@
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&uart1_bt_pins_default>;
|
||||
pinctrl-1 = <&uart1_bt_pins_sleep>;
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "okay";
|
||||
/*
|
||||
* these are on the crossbar and are outlined in the
|
||||
* xbar-event-map element
|
||||
*/
|
||||
dmas = <&edma_xbar 30 0 1>,
|
||||
<&edma_xbar 31 0 2>;
|
||||
dma-names = "tx", "rx";
|
||||
vmmc-supply = <&vmmcwl_fixed>;
|
||||
bus-width = <4>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&mmc3_pins_default>;
|
||||
pinctrl-1 = <&mmc3_pins_sleep>;
|
||||
cap-power-off-card;
|
||||
keep-power-in-suspend;
|
||||
ti,non-removable;
|
||||
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1835";
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&wlan_pins_default>;
|
||||
pinctrl-1 = <&wlan_pins_sleep>;
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio4>;
|
||||
interrupts = <13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb2_phy1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -595,7 +595,7 @@
|
||||
tps65218: tps65218@24 {
|
||||
reg = <0x24>;
|
||||
compatible = "ti,tps65218";
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_NONE>; /* NMIn */
|
||||
interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
|
||||
@ -10,6 +10,7 @@
|
||||
#include "dra72x.dtsi"
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include "dra7-mmc-iodelay.dtsi"
|
||||
#include "dra72x-mmc-iodelay.dtsi"
|
||||
#include "am57xx-idk-common.dtsi"
|
||||
|
||||
@ -102,7 +103,7 @@
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
|
||||
pinctrl-1 = <&mmc1_pins_hs>;
|
||||
pinctrl-2 = <&mmc1_pins_sdr12>;
|
||||
pinctrl-3 = <&mmc1_pins_sdr25>;
|
||||
@ -112,7 +113,7 @@
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default", "hs", "ddr_1_8v";
|
||||
pinctrl-names = "default", "hs", "ddr_3_3v";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
pinctrl-1 = <&mmc2_pins_hs>;
|
||||
pinctrl-2 = <&mmc2_pins_ddr_rev20 &mmc2_iodelay_ddr_conf>;
|
||||
|
||||
@ -9,6 +9,7 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra74x.dtsi"
|
||||
#include "dra7-mmc-iodelay.dtsi"
|
||||
#include "dra74x-mmc-iodelay.dtsi"
|
||||
#include "am572x-idk-common.dtsi"
|
||||
|
||||
@ -20,7 +21,7 @@
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
|
||||
pinctrl-0 = <&mmc1_pins_default>;
|
||||
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
|
||||
pinctrl-1 = <&mmc1_pins_hs>;
|
||||
pinctrl-2 = <&mmc1_pins_sdr12>;
|
||||
pinctrl-3 = <&mmc1_pins_sdr25>;
|
||||
@ -30,7 +31,7 @@
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default", "hs", "ddr_1_8v";
|
||||
pinctrl-names = "default", "hs", "ddr_3_3v";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
pinctrl-1 = <&mmc2_pins_hs>;
|
||||
pinctrl-2 = <&mmc2_pins_ddr_rev20>;
|
||||
|
||||
@ -7,6 +7,8 @@
|
||||
/dts-v1/;
|
||||
|
||||
#include "dra76x.dtsi"
|
||||
#include "dra7-mmc-iodelay.dtsi"
|
||||
#include "dra76x-mmc-iodelay.dtsi"
|
||||
#include "am572x-idk-common.dtsi"
|
||||
|
||||
/ {
|
||||
@ -20,3 +22,21 @@
|
||||
spi-max-frequency = <96000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
|
||||
pinctrl-0 = <&mmc1_pins_default_no_clk_pu>;
|
||||
pinctrl-1 = <&mmc1_pins_hs>;
|
||||
pinctrl-2 = <&mmc1_pins_default>;
|
||||
pinctrl-3 = <&mmc1_pins_hs>;
|
||||
pinctrl-4 = <&mmc1_pins_sdr50>;
|
||||
pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_conf>;
|
||||
pinctrl-6 = <&mmc1_pins_ddr50 &mmc1_iodelay_sdr104_conf>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default", "hs", "ddr_3_3v";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
pinctrl-1 = <&mmc2_pins_default>;
|
||||
pinctrl-2 = <&mmc2_pins_default>;
|
||||
};
|
||||
|
||||
@ -444,8 +444,8 @@
|
||||
vmmc-supply = <&vdd_3v3>;
|
||||
vqmmc-supply = <&vdd_3v3>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
cap-mmc-dual-data-rate;
|
||||
non-removable;
|
||||
no-1-8-v;
|
||||
};
|
||||
|
||||
&sata {
|
||||
|
||||
@ -25,10 +25,11 @@
|
||||
pinctrl-1 = <&mmc1_pins_hs>;
|
||||
|
||||
vmmc-supply = <&ldo1_reg>;
|
||||
no-1-8-v;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
pinctrl-names = "default", "hs", "ddr_1_8v";
|
||||
pinctrl-names = "default", "hs", "ddr_3_3v";
|
||||
pinctrl-0 = <&mmc2_pins_default>;
|
||||
pinctrl-1 = <&mmc2_pins_hs>;
|
||||
pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
|
||||
|
||||
@ -115,17 +115,6 @@
|
||||
DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins_default: mmc1_pins_default {
|
||||
pinctrl-single,pins = <
|
||||
DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mmc1_clk.clk */
|
||||
DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
|
||||
DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
|
||||
DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
|
||||
DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
|
||||
DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
@ -423,8 +412,9 @@
|
||||
vmmc-supply = <&v3_3d>;
|
||||
vqmmc-supply = <&v3_3d>;
|
||||
bus-width = <8>;
|
||||
ti,non-removable;
|
||||
non-removable;
|
||||
max-frequency = <96000000>;
|
||||
no-1-8-v;
|
||||
};
|
||||
|
||||
&dcan1 {
|
||||
|
||||
@ -105,33 +105,6 @@
|
||||
usb@51000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -239,3 +212,33 @@
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -44,61 +44,6 @@
|
||||
usb@50000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
/* 1.0 MiB */
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
/* 128 KiB */
|
||||
reg = <0x100000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "uImage";
|
||||
/* 7 MiB */
|
||||
reg = <0x120000 0x700000>;
|
||||
};
|
||||
|
||||
partition@820000 {
|
||||
label = "ubifs";
|
||||
/* ~ 84 MiB */
|
||||
reg = <0x820000 0x54e0000>;
|
||||
};
|
||||
|
||||
/* Hardcoded into stock bootloader */
|
||||
partition@5d00000 {
|
||||
label = "failsafe-uImage";
|
||||
/* 5 MiB */
|
||||
reg = <0x5d00000 0x500000>;
|
||||
};
|
||||
|
||||
partition@6200000 {
|
||||
label = "failsafe-fs";
|
||||
/* 29 MiB */
|
||||
reg = <0x6200000 0x1d00000>;
|
||||
};
|
||||
|
||||
partition@7f00000 {
|
||||
label = "bbt";
|
||||
/* 1 MiB for BBT */
|
||||
reg = <0x7f00000 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -319,3 +264,68 @@
|
||||
clock-frequency = <100000>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
/* 1.0 MiB */
|
||||
reg = <0x0000000 0x100000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u-boot-env";
|
||||
/* 128 KiB */
|
||||
reg = <0x100000 0x20000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@120000 {
|
||||
label = "uImage";
|
||||
/* 7 MiB */
|
||||
reg = <0x120000 0x700000>;
|
||||
};
|
||||
|
||||
partition@820000 {
|
||||
label = "ubifs";
|
||||
/* ~ 84 MiB */
|
||||
reg = <0x820000 0x54e0000>;
|
||||
};
|
||||
|
||||
/* Hardcoded into stock bootloader */
|
||||
partition@5d00000 {
|
||||
label = "failsafe-uImage";
|
||||
/* 5 MiB */
|
||||
reg = <0x5d00000 0x500000>;
|
||||
};
|
||||
|
||||
partition@6200000 {
|
||||
label = "failsafe-fs";
|
||||
/* 29 MiB */
|
||||
reg = <0x6200000 0x1d00000>;
|
||||
};
|
||||
|
||||
partition@7f00000 {
|
||||
label = "bbt";
|
||||
/* 1 MiB for BBT */
|
||||
reg = <0x7f00000 0x100000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -108,27 +108,6 @@
|
||||
reg = <0x25>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x400000>;
|
||||
};
|
||||
partition@400000 {
|
||||
label = "Linux";
|
||||
reg = <0x400000 0x400000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x800000 0x3f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -173,3 +152,33 @@
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x400000>;
|
||||
};
|
||||
partition@400000 {
|
||||
label = "Linux";
|
||||
reg = <0x400000 0x400000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x800000 0x3f800000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -81,46 +81,6 @@
|
||||
pwm_polarity = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -264,3 +224,53 @@
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -90,46 +90,6 @@
|
||||
reg = <0x23>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -276,3 +236,53 @@
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -112,27 +112,6 @@
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -288,3 +267,34 @@
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -66,33 +66,6 @@
|
||||
interrupts = <110>;
|
||||
};
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x300000>;
|
||||
};
|
||||
partition@300000 {
|
||||
label = "device-tree";
|
||||
reg = <0x300000 0x20000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "linux";
|
||||
reg = <0x320000 0x2000000>;
|
||||
};
|
||||
partition@2320000 {
|
||||
label = "rootfs";
|
||||
reg = <0x2320000 0xdce0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
};
|
||||
@ -227,3 +200,40 @@
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0 0x300000>;
|
||||
};
|
||||
partition@300000 {
|
||||
label = "device-tree";
|
||||
reg = <0x300000 0x20000>;
|
||||
};
|
||||
partition@320000 {
|
||||
label = "linux";
|
||||
reg = <0x320000 0x2000000>;
|
||||
};
|
||||
partition@2320000 {
|
||||
label = "rootfs";
|
||||
reg = <0x2320000 0xdce0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -244,11 +244,11 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand: nand@d0000 {
|
||||
compatible = "marvell,armada370-nand";
|
||||
nand_controller: nand-controller@d0000 {
|
||||
compatible = "marvell,armada370-nand-controller";
|
||||
reg = <0xd0000 0x54>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <113>;
|
||||
clocks = <&coredivclk 0>;
|
||||
status = "disabled";
|
||||
|
||||
@ -103,28 +103,38 @@
|
||||
nr-ports = <2>;
|
||||
};
|
||||
|
||||
&nand {
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -502,11 +502,11 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
nand: nand@d0000 {
|
||||
compatible = "marvell,armada370-nand";
|
||||
nand_controller: nand-controller@d0000 {
|
||||
compatible = "marvell,armada370-nand-controller";
|
||||
reg = <0xd0000 0x54>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&gateclk 11>;
|
||||
status = "disabled";
|
||||
|
||||
@ -135,39 +135,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nfc: flash@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0x00000000 0x00800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "uImage";
|
||||
reg = <0x00800000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c00000 {
|
||||
label = "Root";
|
||||
reg = <0x00c00000 0x3f400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
status = "okay";
|
||||
usb-phy = <&usb3_phy>;
|
||||
@ -233,3 +200,39 @@
|
||||
spi-max-frequency = <54000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0x00000000 0x00800000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "uImage";
|
||||
reg = <0x00800000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@c00000 {
|
||||
label = "Root";
|
||||
reg = <0x00c00000 0x3f400000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -73,67 +73,72 @@
|
||||
|
||||
&nand {
|
||||
/* 128MiB */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -73,67 +73,72 @@
|
||||
|
||||
&nand {
|
||||
/* 128MiB */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -81,74 +81,79 @@
|
||||
|
||||
&nand {
|
||||
/* AMD/Spansion S34ML02G2 256MiB, OEM Layout */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x20000>; /* 128KiB */
|
||||
};
|
||||
partition@200000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x20000>; /* 128KiB */
|
||||
};
|
||||
|
||||
partition@220000 {
|
||||
label = "s_env";
|
||||
reg = <0x220000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@220000 {
|
||||
label = "s_env";
|
||||
reg = <0x220000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@7e0000 {
|
||||
label = "devinfo";
|
||||
reg = <0x7e0000 0x40000>; /* 256KiB */
|
||||
read-only;
|
||||
};
|
||||
partition@7e0000 {
|
||||
label = "devinfo";
|
||||
reg = <0x7e0000 0x40000>; /* 256KiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@820000 {
|
||||
label = "sysdiag";
|
||||
reg = <0x820000 0x1e0000>; /* 1920KiB */
|
||||
read-only;
|
||||
};
|
||||
partition@820000 {
|
||||
label = "sysdiag";
|
||||
reg = <0x820000 0x1e0000>; /* 1920KiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x5000000>; /* 80MiB */
|
||||
};
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x5000000>; /* 80MiB */
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x4a00000>; /* 74MiB */
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x4a00000>; /* 74MiB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@5a00000 {
|
||||
label = "kernel2";
|
||||
reg = <0x5a00000 0x5000000>; /* 80MiB */
|
||||
};
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@5a00000 {
|
||||
label = "kernel2";
|
||||
reg = <0x5a00000 0x5000000>; /* 80MiB */
|
||||
};
|
||||
|
||||
partition@6000000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x6000000 0x4a00000>; /* 74MiB */
|
||||
};
|
||||
partition@6000000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x6000000 0x4a00000>; /* 74MiB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 86MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@aa00000 {
|
||||
label = "syscfg";
|
||||
reg = <0xaa00000 0x5600000>;
|
||||
};
|
||||
/*
|
||||
* 86MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@aa00000 {
|
||||
label = "syscfg";
|
||||
reg = <0xaa00000 0x5600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x260000 0x5c0000>; /* 5.75MiB */
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x260000 0x5c0000>; /* 5.75MiB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -73,67 +73,72 @@
|
||||
|
||||
&nand {
|
||||
/* 128MiB */
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x200000>; /* 2MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x200000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x240000 0x40000>; /* 256KiB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MiB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "rootfs1";
|
||||
reg = <0x1000000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MiB */
|
||||
};
|
||||
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
partition@3800000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3800000 0x2200000>; /* 34MiB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
/*
|
||||
* 38MiB, last MiB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x280000 0x680000>; /* 6.5MiB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -138,13 +138,19 @@
|
||||
};
|
||||
};
|
||||
|
||||
&nand {
|
||||
&nand_controller {
|
||||
/* 128MiB or 256MiB */
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
nand: nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
};
|
||||
};
|
||||
|
||||
&mdio {
|
||||
|
||||
@ -139,7 +139,7 @@
|
||||
3700 5
|
||||
3900 6
|
||||
4000 7>;
|
||||
cooling-cells = <2>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
gpio-leds {
|
||||
|
||||
@ -91,29 +91,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
|
||||
sdhci@d8000 {
|
||||
broken-cd;
|
||||
wp-inverted;
|
||||
@ -165,3 +142,35 @@
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -163,7 +163,7 @@
|
||||
};
|
||||
|
||||
uart0: serial@12000 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
compatible = "marvell,armada-38x-uart";
|
||||
reg = <0x12000 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -173,7 +173,7 @@
|
||||
};
|
||||
|
||||
uart1: serial@12100 {
|
||||
compatible = "snps,dw-apb-uart";
|
||||
compatible = "marvell,armada-38x-uart";
|
||||
reg = <0x12100 0x100>;
|
||||
reg-shift = <2>;
|
||||
interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
||||
@ -547,15 +547,15 @@
|
||||
|
||||
thermal: thermal@e8078 {
|
||||
compatible = "marvell,armada380-thermal";
|
||||
reg = <0xe4078 0x4>, <0xe4074 0x4>;
|
||||
reg = <0xe4078 0x4>, <0xe4070 0x8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand: flash@d0000 {
|
||||
compatible = "marvell,armada370-nand";
|
||||
nand_controller: nand-controller@d0000 {
|
||||
compatible = "marvell,armada370-nand-controller";
|
||||
reg = <0xd0000 0x54>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&coredivclk 0>;
|
||||
status = "disabled";
|
||||
|
||||
@ -49,37 +49,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* CON98 */
|
||||
usb3@f8000 {
|
||||
status = "okay";
|
||||
@ -136,3 +105,38 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -57,41 +57,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0x00000000 0x00600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "uImage";
|
||||
reg = <0x00600000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "Root";
|
||||
reg = <0x00a00000 0x3f600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* CON18 */
|
||||
sdhci@d8000 {
|
||||
clock-frequency = <200000000>;
|
||||
@ -130,3 +95,42 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0x00000000 0x00600000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "uImage";
|
||||
reg = <0x00600000 0x00400000>;
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@1000000 {
|
||||
label = "Root";
|
||||
reg = <0x00a00000 0x3f600000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -51,31 +51,6 @@
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
status = "okay";
|
||||
};
|
||||
@ -122,3 +97,38 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
pinctrl-0 = <&nand_pins>;
|
||||
pinctrl-names = "default";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "U-Boot";
|
||||
reg = <0 0x800000>;
|
||||
};
|
||||
partition@800000 {
|
||||
label = "Linux";
|
||||
reg = <0x800000 0x800000>;
|
||||
};
|
||||
partition@1000000 {
|
||||
label = "Filesystem";
|
||||
reg = <0x1000000 0x3f000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -367,11 +367,11 @@
|
||||
interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
flash@d0000 {
|
||||
compatible = "marvell,armada370-nand";
|
||||
nand_controller: nand-controller@d0000 {
|
||||
compatible = "marvell,armada370-nand-controller";
|
||||
reg = <0xd0000 0x54>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&coredivclk 0>;
|
||||
status = "disabled";
|
||||
|
||||
@ -306,6 +306,19 @@
|
||||
&pinctrl {
|
||||
compatible = "marvell,98dx3236-pinctrl";
|
||||
|
||||
nand_pins: nand-pins {
|
||||
marvell,pins = "mpp20", "mpp21", "mpp22",
|
||||
"mpp23", "mpp24", "mpp25",
|
||||
"mpp26", "mpp27", "mpp28",
|
||||
"mpp29", "mpp30";
|
||||
marvell,function = "dev";
|
||||
};
|
||||
|
||||
nand_rb: nand-rb {
|
||||
marvell,pins = "mpp19";
|
||||
marvell,function = "nand";
|
||||
};
|
||||
|
||||
spi0_pins: spi0-pins {
|
||||
marvell,pins = "mpp0", "mpp1",
|
||||
"mpp2", "mpp3";
|
||||
|
||||
@ -70,9 +70,9 @@
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
label = "pxa3xx_nand-0";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
@ -69,9 +69,9 @@
|
||||
|
||||
&nand {
|
||||
status = "okay";
|
||||
label = "pxa3xx_nand-0";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
@ -146,9 +146,9 @@
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
label = "pxa3xx_nand-0";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
|
||||
@ -162,9 +162,9 @@
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
label = "pxa3xx_nand-0";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
};
|
||||
};
|
||||
|
||||
@ -83,9 +83,9 @@
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
label = "pxa3xx_nand-0";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
partitions {
|
||||
|
||||
@ -165,79 +165,6 @@
|
||||
bm@c8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x100000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x140000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@d00000 {
|
||||
label = "rootfs1";
|
||||
reg = <0xd00000 0x2500000>; /* 37MB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@3500000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3500000 0x2500000>; /* 37MB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MB, last MB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x180000 0x780000>; /* 7.5MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
bm-bppi {
|
||||
@ -434,3 +361,86 @@
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@100000 {
|
||||
label = "u_env";
|
||||
reg = <0x100000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@140000 {
|
||||
label = "s_env";
|
||||
reg = <0x140000 0x40000>; /* 256KB */
|
||||
};
|
||||
|
||||
partition@900000 {
|
||||
label = "devinfo";
|
||||
reg = <0x900000 0x100000>; /* 1MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
/* kernel1 overlaps with rootfs1 by design */
|
||||
partition@a00000 {
|
||||
label = "kernel1";
|
||||
reg = <0xa00000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@d00000 {
|
||||
label = "rootfs1";
|
||||
reg = <0xd00000 0x2500000>; /* 37MB */
|
||||
};
|
||||
|
||||
/* kernel2 overlaps with rootfs2 by design */
|
||||
partition@3200000 {
|
||||
label = "kernel2";
|
||||
reg = <0x3200000 0x2800000>; /* 40MB */
|
||||
};
|
||||
|
||||
partition@3500000 {
|
||||
label = "rootfs2";
|
||||
reg = <0x3500000 0x2500000>; /* 37MB */
|
||||
};
|
||||
|
||||
/*
|
||||
* 38MB, last MB is for the BBT, not writable
|
||||
*/
|
||||
partition@5a00000 {
|
||||
label = "syscfg";
|
||||
reg = <0x5a00000 0x2600000>;
|
||||
};
|
||||
|
||||
/*
|
||||
* Unused area between "s_env" and "devinfo".
|
||||
* Moved here because otherwise the renumbered
|
||||
* partitions would break the bootloader
|
||||
* supplied bootargs
|
||||
*/
|
||||
partition@180000 {
|
||||
label = "unused_area";
|
||||
reg = <0x180000 0x780000>; /* 7.5MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -117,46 +117,6 @@
|
||||
nr-ports = <2>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
nand@d0000 {
|
||||
status = "okay";
|
||||
num-cs = <1>;
|
||||
marvell,nand-keep-config;
|
||||
marvell,nand-enable-arbiter;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -345,3 +305,53 @@
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand@0 {
|
||||
reg = <0>;
|
||||
label = "pxa3xx_nand-0";
|
||||
nand-rb = <0>;
|
||||
marvell,nand-keep-config;
|
||||
nand-on-flash-bbt;
|
||||
|
||||
/* Use Hardware BCH ECC */
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "u-boot";
|
||||
reg = <0x0000000 0x180000>; /* 1.5MB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@180000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0x180000 0x20000>; /* 128KB */
|
||||
read-only;
|
||||
};
|
||||
|
||||
partition@200000 {
|
||||
label = "uImage";
|
||||
reg = <0x0200000 0x600000>; /* 6MB */
|
||||
};
|
||||
|
||||
partition@800000 {
|
||||
label = "minirootfs";
|
||||
reg = <0x0800000 0x400000>; /* 4MB */
|
||||
};
|
||||
|
||||
/* Last MB is for the BBT, i.e. not writable */
|
||||
partition@c00000 {
|
||||
label = "ubifs";
|
||||
reg = <0x0c00000 0x7400000>; /* 116MB */
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -79,3 +79,21 @@
|
||||
reg = <0x4d>;
|
||||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2ah_default>;
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2bh_default>;
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
|
||||
/* No pinctrl, this follows the above EHCI settings */
|
||||
};
|
||||
|
||||
129
sys/gnu/dts/arm/aspeed-bmc-intel-s2600wf.dts
Normal file
129
sys/gnu/dts/arm/aspeed-bmc-intel-s2600wf.dts
Normal file
@ -0,0 +1,129 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
// Copyright (c) 2017 Intel Corporation
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
|
||||
/ {
|
||||
model = "S2600WF BMC";
|
||||
compatible = "intel,s2600wf-bmc", "aspeed,ast2500";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
bootargs = "earlyprintk";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
vga_memory: framebuffer@7f000000 {
|
||||
no-map;
|
||||
reg = <0x7f000000 0x01000000>;
|
||||
};
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
||||
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
|
||||
<&adc 12>, <&adc 13>, <&adc 14>, <&adc 15>;
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
#include "openbmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
};
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default>;
|
||||
use-ncsi;
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c13 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gfx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
aspeed,external-nodes = <&gfx &lhc>;
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
|
||||
&pinctrl_pwm2_default &pinctrl_pwm3_default
|
||||
&pinctrl_pwm4_default &pinctrl_pwm5_default
|
||||
&pinctrl_pwm6_default &pinctrl_pwm7_default>;
|
||||
};
|
||||
325
sys/gnu/dts/arm/aspeed-bmc-opp-lanyang.dts
Normal file
325
sys/gnu/dts/arm/aspeed-bmc-opp-lanyang.dts
Normal file
@ -0,0 +1,325 @@
|
||||
// SPDX-License-Identifier: GPL-2.0+
|
||||
// Copyright (c) 2018 Inventec Corporation
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Lanyang BMC";
|
||||
compatible = "inventec,lanyang-bmc", "aspeed,ast2500";
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
bootargs = "console=ttyS4,115200 earlyprintk";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x40000000>;
|
||||
};
|
||||
|
||||
reserved-memory {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flash_memory: region@98000000 {
|
||||
no-map;
|
||||
reg = <0x98000000 0x04000000>; /* 64M */
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
sys_boot_status {
|
||||
label = "System_boot_status";
|
||||
gpios = <&gpio ASPEED_GPIO(B, 6) GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
attention {
|
||||
label = "Attention_locator";
|
||||
gpios = <&gpio ASPEED_GPIO(B, 7) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
plt_fault {
|
||||
label = "Platform_fault";
|
||||
gpios = <&gpio ASPEED_GPIO(B, 1) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
hdd_fault {
|
||||
label = "Onboard_drive_fault";
|
||||
gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
bmc_err {
|
||||
lable = "BMC_fault";
|
||||
gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
sys_err {
|
||||
lable = "Sys_fault";
|
||||
gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
fsi: gpio-fsi {
|
||||
compatible = "fsi-master-gpio", "fsi-master";
|
||||
#address-cells = <2>;
|
||||
#size-cells = <0>;
|
||||
|
||||
clock-gpios = <&gpio ASPEED_GPIO(J, 0) GPIO_ACTIVE_HIGH>;
|
||||
data-gpios = <&gpio ASPEED_GPIO(J, 1) GPIO_ACTIVE_HIGH>;
|
||||
trans-gpios = <&gpio ASPEED_GPIO(D, 5) GPIO_ACTIVE_HIGH>;
|
||||
enable-gpios = <&gpio ASPEED_GPIO(D, 0) GPIO_ACTIVE_HIGH>;
|
||||
mux-gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
iio-hwmon {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>,
|
||||
<&adc 4>, <&adc 5>, <&adc 6>, <&adc 7>,
|
||||
<&adc 8>, <&adc 9>, <&adc 10>, <&adc 11>,
|
||||
<&adc 13>, <&adc 14>, <&adc 15>;
|
||||
};
|
||||
|
||||
iio-hwmon-battery {
|
||||
compatible = "iio-hwmon";
|
||||
io-channels = <&adc 12>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default
|
||||
&pinctrl_pwm2_default &pinctrl_pwm3_default>;
|
||||
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@1 {
|
||||
reg = <0x01>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
||||
};
|
||||
|
||||
fan@2 {
|
||||
reg = <0x02>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x02>;
|
||||
};
|
||||
|
||||
fan@3 {
|
||||
reg = <0x03>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x03>;
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "bmc";
|
||||
#include "openbmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
label = "pnor";
|
||||
m25p,fast-read;
|
||||
};
|
||||
};
|
||||
|
||||
&spi2 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi2ck_default
|
||||
&pinctrl_spi2cs0_default
|
||||
&pinctrl_spi2cs1_default
|
||||
&pinctrl_spi2miso_default
|
||||
&pinctrl_spi2mosi_default>;
|
||||
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default>;
|
||||
};
|
||||
|
||||
&lpc_ctrl {
|
||||
status = "okay";
|
||||
memory-region = <&flash_memory>;
|
||||
flash = <&spi1>;
|
||||
};
|
||||
|
||||
&lpc_snoop {
|
||||
status = "okay";
|
||||
snoop-ports = <0x80>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default>;
|
||||
use-ncsi;
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@55 {
|
||||
compatible = "atmel,24c64";
|
||||
reg = <0x55>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
|
||||
rtc@68 {
|
||||
compatible = "nxp,pcf8523";
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
tmp75@48 {
|
||||
compatible = "ti,tmp75";
|
||||
reg = <0x48>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c9 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c10 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c11 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&vuart {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gfx {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
aspeed,external-nodes = <&gfx &lhc>;
|
||||
};
|
||||
|
||||
&gpio {
|
||||
pin_gpio_b0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(B, 0) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_HDD1_PWR_EN";
|
||||
};
|
||||
|
||||
pin_gpio_b5 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "BMC_USB1_OCI2";
|
||||
};
|
||||
|
||||
pin_gpio_h5 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(H, 5) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_CP0_PERST_ENABLE_R";
|
||||
};
|
||||
|
||||
pin_gpio_z2 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(Z, 2) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "RST_PCA9546_U177_N";
|
||||
};
|
||||
|
||||
pin_gpio_aa6 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AA, 6) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_CP0_RESET_N";
|
||||
};
|
||||
|
||||
pin_gpio_aa7 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AA, 7) GPIO_ACTIVE_HIGH>;
|
||||
output-high;
|
||||
line-name = "BMC_TPM_RESET_N";
|
||||
};
|
||||
|
||||
pin_gpio_ab0 {
|
||||
gpio-hog;
|
||||
gpios = <ASPEED_GPIO(AB, 0) GPIO_ACTIVE_LOW>;
|
||||
output-high;
|
||||
line-name = "BMC_USB_PWRON_N";
|
||||
};
|
||||
};
|
||||
|
||||
&ibt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&adc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -68,6 +68,12 @@
|
||||
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(J, 2)>;
|
||||
};
|
||||
|
||||
id-button {
|
||||
label = "id-button";
|
||||
gpios = <&gpio ASPEED_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(Q, 7)>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -28,6 +28,34 @@
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys {
|
||||
compatible = "gpio-keys";
|
||||
|
||||
air-water {
|
||||
label = "air-water";
|
||||
gpios = <&gpio ASPEED_GPIO(B, 5) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(B, 5)>;
|
||||
};
|
||||
|
||||
checkstop {
|
||||
label = "checkstop";
|
||||
gpios = <&gpio ASPEED_GPIO(J, 2) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(J, 2)>;
|
||||
};
|
||||
|
||||
ps0-presence {
|
||||
label = "ps0-presence";
|
||||
gpios = <&gpio ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(P, 7)>;
|
||||
};
|
||||
|
||||
ps1-presence {
|
||||
label = "ps1-presence";
|
||||
gpios = <&gpio ASPEED_GPIO(N, 0) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(N, 0)>;
|
||||
};
|
||||
};
|
||||
|
||||
gpio-keys-polled {
|
||||
compatible = "gpio-keys-polled";
|
||||
#address-cells = <1>;
|
||||
@ -547,6 +575,10 @@
|
||||
pinctrl-0 = <&pinctrl_wdtrst1_default>;
|
||||
};
|
||||
|
||||
&wdt2 {
|
||||
aspeed,alt-boot;
|
||||
};
|
||||
|
||||
&ibt {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
@ -55,6 +55,12 @@
|
||||
gpios = <&gpio ASPEED_GPIO(F, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(F, 7)>;
|
||||
};
|
||||
|
||||
pcie-e2b-present{
|
||||
label = "pcie-e2b-present";
|
||||
gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
|
||||
linux,code = <ASPEED_GPIO(E, 7)>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
|
||||
159
sys/gnu/dts/arm/aspeed-bmc-portwell-neptune.dts
Normal file
159
sys/gnu/dts/arm/aspeed-bmc-portwell-neptune.dts
Normal file
@ -0,0 +1,159 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
// Copyright (c) 2017 Facebook Inc.
|
||||
/dts-v1/;
|
||||
|
||||
#include "aspeed-g5.dtsi"
|
||||
#include <dt-bindings/gpio/aspeed-gpio.h>
|
||||
|
||||
/ {
|
||||
model = "Portwell Neptune BMC";
|
||||
compatible = "portwell,neptune-bmc", "aspeed,ast2500";
|
||||
aliases {
|
||||
serial0 = &uart1;
|
||||
serial4 = &uart5;
|
||||
};
|
||||
chosen {
|
||||
stdout-path = &uart5;
|
||||
bootargs = "console=ttyS4,115200 earlyprintk";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x80000000 0x20000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
postcode0 {
|
||||
label="BMC_UP";
|
||||
gpios = <&gpio ASPEED_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
|
||||
default-state = "on";
|
||||
};
|
||||
postcode1 {
|
||||
label="BMC_HB";
|
||||
gpios = <&gpio ASPEED_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
};
|
||||
postcode2 {
|
||||
label="FAULT";
|
||||
gpios = <&gpio ASPEED_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
// postcode3-7 are GPIOH3-H7
|
||||
};
|
||||
};
|
||||
|
||||
&fmc {
|
||||
status = "okay";
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
#include "openbmc-flash-layout.dtsi"
|
||||
};
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_spi1_default>;
|
||||
flash@0 {
|
||||
status = "okay";
|
||||
m25p,fast-read;
|
||||
label = "pnor";
|
||||
};
|
||||
};
|
||||
|
||||
&uart1 {
|
||||
// Host Console
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_txd1_default
|
||||
&pinctrl_rxd1_default>;
|
||||
};
|
||||
|
||||
&uart5 {
|
||||
// BMC Console
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mac0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii1_default
|
||||
&pinctrl_mdio1_default>;
|
||||
};
|
||||
|
||||
&mac1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_rmii2_default>;
|
||||
use-ncsi;
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
// To PCIe slot SMBUS
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
status = "okay";
|
||||
// To LAN I210
|
||||
};
|
||||
|
||||
&i2c3 {
|
||||
status = "okay";
|
||||
// SMBus to COMe AB
|
||||
};
|
||||
|
||||
&i2c4 {
|
||||
status = "okay";
|
||||
// I2C to COMe AB
|
||||
};
|
||||
|
||||
&i2c5 {
|
||||
status = "okay";
|
||||
// USB Debug card
|
||||
pca9555@27 {
|
||||
compatible = "nxp,pca9555";
|
||||
reg = <0x27>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c6 {
|
||||
status = "okay";
|
||||
tpm@20 {
|
||||
compatible = "infineon,slb9645tt";
|
||||
reg = <0x20>;
|
||||
};
|
||||
tmp421@4e {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4e>;
|
||||
};
|
||||
tmp421@4f {
|
||||
compatible = "ti,tmp421";
|
||||
reg = <0x4f>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
eeprom@51 {
|
||||
compatible = "atmel,24c128";
|
||||
reg = <0x51>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
&pwm_tacho {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pwm0_default &pinctrl_pwm1_default>;
|
||||
fan@0 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x00>;
|
||||
};
|
||||
|
||||
fan@1 {
|
||||
reg = <0x00>;
|
||||
aspeed,fan-tach-ch = /bits/ 8 <0x01>;
|
||||
};
|
||||
};
|
||||
@ -108,6 +108,23 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci0: usb@1e6a1000 {
|
||||
compatible = "aspeed,ast2400-ehci", "generic-ehci";
|
||||
reg = <0x1e6a1000 0x100>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uhci: usb@1e6b0000 {
|
||||
compatible = "aspeed,ast2400-uhci", "generic-uhci";
|
||||
reg = <0x1e6b0000 0x100>;
|
||||
interrupts = <14>;
|
||||
#ports = <3>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
@ -125,6 +142,14 @@
|
||||
pinctrl: pinctrl {
|
||||
compatible = "aspeed,g4-pinctrl";
|
||||
};
|
||||
|
||||
};
|
||||
|
||||
rng: hwrng@1e6e2078 {
|
||||
compatible = "timeriomem_rng";
|
||||
reg = <0x1e6e2078 0x4>;
|
||||
period = <1>;
|
||||
quality = <100>;
|
||||
};
|
||||
|
||||
adc: adc@1e6e9000 {
|
||||
@ -1250,6 +1275,16 @@
|
||||
groups = "USBCKI";
|
||||
};
|
||||
|
||||
pinctrl_usb2h_default: usb2h_default {
|
||||
function = "USB2H1";
|
||||
groups = "USB2H1";
|
||||
};
|
||||
|
||||
pinctrl_usb2d_default: usb2d_default {
|
||||
function = "USB2D1";
|
||||
groups = "USB2D1";
|
||||
};
|
||||
|
||||
pinctrl_vgabios_rom_default: vgabios_rom_default {
|
||||
function = "VGABIOS_ROM";
|
||||
groups = "VGABIOS_ROM";
|
||||
|
||||
@ -143,6 +143,31 @@
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci0: usb@1e6a1000 {
|
||||
compatible = "aspeed,ast2500-ehci", "generic-ehci";
|
||||
reg = <0x1e6a1000 0x100>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
ehci1: usb@1e6a3000 {
|
||||
compatible = "aspeed,ast2500-ehci", "generic-ehci";
|
||||
reg = <0x1e6a3000 0x100>;
|
||||
interrupts = <13>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
uhci: usb@1e6b0000 {
|
||||
compatible = "aspeed,ast2500-uhci", "generic-uhci";
|
||||
reg = <0x1e6b0000 0x100>;
|
||||
interrupts = <14>;
|
||||
#ports = <2>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
@ -164,6 +189,13 @@
|
||||
};
|
||||
};
|
||||
|
||||
rng: hwrng@1e6e2078 {
|
||||
compatible = "timeriomem_rng";
|
||||
reg = <0x1e6e2078 0x4>;
|
||||
period = <1>;
|
||||
quality = <100>;
|
||||
};
|
||||
|
||||
gfx: display@1e6e6000 {
|
||||
compatible = "aspeed,ast2500-gfx", "syscon";
|
||||
reg = <0x1e6e6000 0x1000>;
|
||||
@ -1380,6 +1412,21 @@
|
||||
groups = "USBCKI";
|
||||
};
|
||||
|
||||
pinctrl_usb2ah_default: usb2ah_default {
|
||||
function = "USB2AH";
|
||||
groups = "USB2AH";
|
||||
};
|
||||
|
||||
pinctrl_usb11bhid_default: usb11bhid_default {
|
||||
function = "USB11BHID";
|
||||
groups = "USB11BHID";
|
||||
};
|
||||
|
||||
pinctrl_usb2bh_default: usb2bh_default {
|
||||
function = "USB2BH";
|
||||
groups = "USB2BH";
|
||||
};
|
||||
|
||||
pinctrl_vgabiosrom_default: vgabiosrom_default {
|
||||
function = "VGABIOSROM";
|
||||
groups = "VGABIOSROM";
|
||||
|
||||
@ -232,7 +232,7 @@
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
|
||||
interrupt-parent = <&pioA>;
|
||||
interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
|
||||
interrupts = <PIN_PB13 IRQ_TYPE_EDGE_RISING>;
|
||||
|
||||
active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
|
||||
active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
|
||||
|
||||
@ -129,8 +129,8 @@
|
||||
wakeup-source;
|
||||
};
|
||||
|
||||
atmel_mxt_ts@4c {
|
||||
compatible = "atmel,atmel_mxt_ts";
|
||||
touchscreen@4c {
|
||||
compatible = "atmel,maxtouch";
|
||||
reg = <0x4c>;
|
||||
interrupt-parent = <&pioE>;
|
||||
interrupts = <24 0x0>;
|
||||
|
||||
@ -216,7 +216,7 @@
|
||||
reg = <0x18008000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
@ -245,7 +245,7 @@
|
||||
reg = <0x1800b000 0x100>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
status = "disabled";
|
||||
};
|
||||
@ -256,7 +256,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@ -278,10 +278,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 97 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 98 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 99 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -291,7 +291,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@ -313,10 +313,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 103 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 104 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 105 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
@ -264,7 +264,7 @@
|
||||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
@ -279,7 +279,7 @@
|
||||
reg = <0x3b000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
};
|
||||
@ -300,7 +300,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@ -322,10 +322,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 183 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 184 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 185 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@ -336,7 +336,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@ -358,10 +358,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 189 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 190 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 191 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
||||
@ -391,7 +391,7 @@
|
||||
reg = <0x38000 0x50>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clock-frequency = <100000>;
|
||||
dma-coherent;
|
||||
status = "disabled";
|
||||
@ -496,7 +496,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <0>;
|
||||
|
||||
@ -519,10 +519,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 128 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 129 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 130 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@ -533,7 +533,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <1>;
|
||||
|
||||
@ -556,10 +556,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 134 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 135 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 136 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
@ -570,7 +570,7 @@
|
||||
|
||||
#interrupt-cells = <1>;
|
||||
interrupt-map-mask = <0 0 0 0>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_NONE>;
|
||||
interrupt-map = <0 0 0 0 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>;
|
||||
|
||||
linux,pci-domain = <2>;
|
||||
|
||||
@ -593,10 +593,10 @@
|
||||
compatible = "brcm,iproc-msi";
|
||||
msi-controller;
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 140 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 141 IRQ_TYPE_NONE>,
|
||||
<GIC_SPI 142 IRQ_TYPE_NONE>;
|
||||
interrupts = <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
|
||||
brcm,pcie-msi-inten;
|
||||
};
|
||||
};
|
||||
|
||||
@ -101,6 +101,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
@ -96,6 +96,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
@ -103,6 +103,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
@ -96,6 +96,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
@ -91,6 +91,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
@ -83,12 +83,6 @@
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
power-domains = <&power RPI_POWER_DOMAIN_USB>;
|
||||
};
|
||||
|
||||
@ -41,6 +41,12 @@
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
|
||||
108
sys/gnu/dts/arm/bcm2837-rpi-3-b-plus.dts
Normal file
108
sys/gnu/dts/arm/bcm2837-rpi-3-b-plus.dts
Normal file
@ -0,0 +1,108 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
#include "bcm2837.dtsi"
|
||||
#include "bcm2835-rpi.dtsi"
|
||||
#include "bcm283x-rpi-lan7515.dtsi"
|
||||
#include "bcm283x-rpi-usb-host.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "raspberrypi,3-model-b-plus", "brcm,bcm2837";
|
||||
model = "Raspberry Pi 3 Model B+";
|
||||
|
||||
chosen {
|
||||
/* 8250 auxiliary UART instead of pl011 */
|
||||
stdout-path = "serial1:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0 0x40000000>;
|
||||
};
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 29 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
pwr {
|
||||
label = "PWR";
|
||||
gpios = <&expgpio 2 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&firmware {
|
||||
expgpio: gpio {
|
||||
compatible = "raspberrypi,firmware-gpio";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-line-names = "BT_ON",
|
||||
"WL_ON",
|
||||
"STATUS_LED",
|
||||
"LAN_RUN",
|
||||
"",
|
||||
"CAM_GPIO0",
|
||||
"CAM_GPIO1",
|
||||
"";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* SDHCI is used to control the SDIO for wireless */
|
||||
&sdhci {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_gpio34>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SDHOST is used to drive the SD card */
|
||||
&sdhost {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&sdhost_gpio48>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
};
|
||||
|
||||
/* uart0 communicates with the BT module */
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_ctsrts_gpio30 &uart0_gpio32 &gpclk2_gpio43>;
|
||||
status = "okay";
|
||||
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
max-speed = <2000000>;
|
||||
shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
/* uart1 is mapped to the pin header */
|
||||
&uart1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart1_gpio14>;
|
||||
status = "okay";
|
||||
};
|
||||
@ -20,9 +20,14 @@
|
||||
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
|
||||
gpios = <&expgpio 2 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
wifi_pwrseq: wifi-pwrseq {
|
||||
compatible = "mmc-pwrseq-simple";
|
||||
reset-gpios = <&expgpio 1 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
&firmware {
|
||||
@ -42,6 +47,16 @@
|
||||
};
|
||||
};
|
||||
|
||||
&pwm {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio41>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
hpd-gpios = <&expgpio 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* uart0 communicates with the BT module */
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
@ -51,6 +66,7 @@
|
||||
bluetooth {
|
||||
compatible = "brcm,bcm43438-bt";
|
||||
max-speed = <2000000>;
|
||||
shutdown-gpios = <&expgpio 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
@ -63,11 +79,19 @@
|
||||
|
||||
/* SDHCI is used to control the SDIO for wireless */
|
||||
&sdhci {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_gpio34>;
|
||||
status = "okay";
|
||||
bus-width = <4>;
|
||||
non-removable;
|
||||
mmc-pwrseq = <&wifi_pwrseq>;
|
||||
|
||||
brcmf: wifi@1 {
|
||||
reg = <1>;
|
||||
compatible = "brcm,bcm4329-fmac";
|
||||
};
|
||||
};
|
||||
|
||||
/* SDHOST is used to drive the SD card */
|
||||
|
||||
27
sys/gnu/dts/arm/bcm283x-rpi-lan7515.dtsi
Normal file
27
sys/gnu/dts/arm/bcm283x-rpi-lan7515.dtsi
Normal file
@ -0,0 +1,27 @@
|
||||
// SPDX-License-Identifier: GPL-2.0
|
||||
/ {
|
||||
aliases {
|
||||
ethernet0 = ðernet;
|
||||
};
|
||||
};
|
||||
|
||||
&usb {
|
||||
usb-port@1 {
|
||||
compatible = "usb424,2514";
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb-port@1 {
|
||||
compatible = "usb424,2514";
|
||||
reg = <1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
ethernet: ethernet@1 {
|
||||
compatible = "usb424,7800";
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
@ -136,6 +136,7 @@
|
||||
rng@7e104000 {
|
||||
compatible = "brcm,bcm2835-rng";
|
||||
reg = <0x7e104000 0x10>;
|
||||
interrupts = <2 29>;
|
||||
};
|
||||
|
||||
mailbox: mailbox@7e00b880 {
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Asus RT-AC56U
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Asus RT-AC68U
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,10 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Buffalo WZR-1750DHP
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2016 Luxul Inc.
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,10 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Luxul XWC-1000
|
||||
*
|
||||
* Copyright 2014 Luxul Inc.
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -26,9 +25,15 @@
|
||||
|
||||
nand: nand@18028000 {
|
||||
nandcs@0 {
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "ubi";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Netgear R6300 V2
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,10 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X arm platform code.
|
||||
* DTS for SmartRG SR400ac
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Asus RT-N18U
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Buffalo WZR-600DHP2
|
||||
*
|
||||
* Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Buffalo WZR-900DHP
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2017 Luxul Inc.
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright 2017 Luxul Inc.
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Asus RT-AC87U
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,10 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Buffalo WXR-1900DHP
|
||||
*
|
||||
* Copyright (C) 2015 Felix Fietkau <nbd@openwrt.org>
|
||||
*
|
||||
* Licensed under the GNU/GPL. See COPYING for details.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for Netgear R7000
|
||||
*
|
||||
* Copyright (C) 2015 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,20 +1,9 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Broadcom BCM470X / BCM5301X ARM platform code.
|
||||
* DTS for D-Link DIR-885L
|
||||
*
|
||||
* Copyright (C) 2016 Rafał Miłecki <zajec5@gmail.com>
|
||||
*
|
||||
* Permission to use, copy, modify, and/or distribute this software for any
|
||||
* purpose with or without fee is hereby granted, provided that the above
|
||||
* copyright notice and this permission notice appear in all copies.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES WITH
|
||||
* REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
|
||||
* AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY SPECIAL, DIRECT,
|
||||
* INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM
|
||||
* LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE
|
||||
* OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR
|
||||
* PERFORMANCE OF THIS SOFTWARE.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
@ -37,9 +26,15 @@
|
||||
|
||||
nand: nand@18028000 {
|
||||
nandcs@0 {
|
||||
partition@0 {
|
||||
label = "firmware";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
partition@0 {
|
||||
label = "firmware";
|
||||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2017 Rafał Miłecki <rafal@milecki.pl>
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
@ -1,7 +1,6 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
||||
/*
|
||||
* Copyright (C) 2017 Luxul Inc.
|
||||
*
|
||||
* Licensed under the ISC license.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Loading…
Reference in New Issue
Block a user